Jul 12 03:10:01 OnlyTux-Poland syslog-ng[2987]: Configuration reload request received, reloading configuration; Jul 12 03:20:01 OnlyTux-Poland cron[6167]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 03:30:01 OnlyTux-Poland cron[6205]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 03:40:01 OnlyTux-Poland cron[6227]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 03:50:01 OnlyTux-Poland cron[6248]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 03:59:01 OnlyTux-Poland cron[6265]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 04:00:01 OnlyTux-Poland cron[6270]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 04:04:15 OnlyTux-Poland kernel: [46141.645187] evince used greatest stack depth: 5436 bytes left Jul 12 04:10:01 OnlyTux-Poland cron[6664]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 04:20:01 OnlyTux-Poland cron[6704]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 04:30:01 OnlyTux-Poland cron[6748]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 04:37:35 OnlyTux-Poland kernel: [48141.997963] firefox used greatest stack depth: 5432 bytes left Jul 12 04:37:36 OnlyTux-Poland kernel: [48142.576524] firefox used greatest stack depth: 5388 bytes left Jul 12 04:39:31 OnlyTux-Poland shutdown[6801]: shutting down for system halt Jul 12 04:39:31 OnlyTux-Poland init: Switching to runlevel: 0 Jul 12 04:39:31 OnlyTux-Poland kernel: [48258.098188] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 12 04:39:31 OnlyTux-Poland kernel: [48258.167753] X used greatest stack depth: 5052 bytes left Jul 12 04:39:31 OnlyTux-Poland kernel: [48258.358891] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 12 04:39:31 OnlyTux-Poland /usr/sbin/gpm[3226]: *** info [mice.c(1988)]: Jul 12 04:39:31 OnlyTux-Poland /usr/sbin/gpm[3226]: imps2: Auto-detected intellimouse PS/2 Jul 12 04:39:35 OnlyTux-Poland dhcpcd[4020]: eth0: received SIGTERM, stopping Jul 12 04:39:35 OnlyTux-Poland kernel: [48262.171121] b44: eth0: powering down PHY Jul 12 04:39:37 OnlyTux-Poland kernel: [48263.492059] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 12 04:39:38 OnlyTux-Poland acpid: exiting Jul 12 04:39:39 OnlyTux-Poland syslog-ng[2987]: Termination requested via signal, terminating; Jul 12 04:39:39 OnlyTux-Poland syslog-ng[2987]: syslog-ng shutting down; version='3.1.1' Jul 12 12:50:57 OnlyTux-Poland syslog-ng[2990]: syslog-ng starting up; version='3.1.1' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.32-gentoo-r7 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #8 Fri Jul 9 19:41:43 CEST 2010 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] KERNEL supported cpus: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Intel GenuineIntel Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] AMD AuthenticAMD Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] NSC Geode by NSC Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Cyrix CyrixInstead Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Centaur CentaurHauls Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Transmeta GenuineTMx86 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Transmeta TransmetaCPU Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] UMC UMC UMC UMC Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe3000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe3000 page 4k Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe3000 @ 10000-15000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe3000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe3000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] node 0 low ram: 00000000 - 37fe3000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] node 0 bootmap 00011000 - 00018000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037fe3000] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 000165a574] TEXT DATA BSS ==> [0001000000 - 000165a574] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] #3 [000165b000 - 00016610d5] BRK ==> [000165b000 - 00016610d5] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe3 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] early_node_map[3] active PFN ranges Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000000 -> 0x00000001 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe3 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229235 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1562f38, node_mem_map c1662000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223491 pages, LIFO batch:31 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227443 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Memory: 902312k/917388k available (3544k kernel code, 14520k reserved, 2019k data, 316k init, 0k highmem) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e3000 - 0xfffe3000 ( 120 MB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe3000 ( 895 MB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc156f000 - 0xc15be000 ( 316 kB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1376008 - 0xc156eff4 (2019 kB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1376008 (3544 kB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.839 MHz processor. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.67 BogoMIPS (lpj=1728839) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001190] Security Framework initialized Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001284] Mount-cache hash table entries: 512 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001458] Initializing cgroup subsys ns Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001546] Initializing cgroup subsys cpuacct Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001634] Initializing cgroup subsys freezer Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.001723] Initializing cgroup subsys net_cls Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002018] CPU: L1 I cache: 32K, L1 D cache: 32K Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002139] CPU: L2 cache: 1024K Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002226] mce: CPU supports 6 MCE banks Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002319] using mwait in idle threads. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002411] Performance Events: no PMU driver, software events only. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002535] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.002696] Checking 'hlt' instruction... OK. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.006575] ACPI: Core revision 20090903 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.017951] ACPI: setting ELCR to 0200 (from 0c60) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.019227] khelper used greatest stack depth: 7516 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.019364] khelper used greatest stack depth: 7384 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.020092] Time: 12:50:32 Date: 07/12/10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.020222] NET: Registered protocol family 16 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.020684] ACPI: bus type pci registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.020886] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.020982] PCI: MCFG area at e0000000 reserved in E820 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.021008] PCI: Using MMCONFIG for extended config space Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.021098] PCI: Using configuration type 1 for base access Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.021474] khelper used greatest stack depth: 7216 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.027678] bio: create slab at 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.028563] ACPI: EC: Look up EC in DSDT Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.032115] ACPI: BIOS _OSI(Linux) query ignored Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.033099] ACPI: Interpreter enabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.033194] ACPI: (supports S0 S3 S4 S5) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.033427] ACPI: Using PIC for interrupt routing Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.083417] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.084067] ACPI: No dock devices found. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.084735] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.084948] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.084954] pci 0000:00:02.0: reg 14 io port: [0x5088-0x508f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.084960] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.084966] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085038] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085155] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085217] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085312] pci 0000:00:1b.0: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085489] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085584] pci 0000:00:1c.0: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085763] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.085856] pci 0000:00:1c.1: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086046] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086139] pci 0000:00:1c.2: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086319] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086414] pci 0000:00:1c.3: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086564] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086630] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086696] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086761] pci 0000:00:1d.3: reg 20 io port: [0x5400-0x541f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086830] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.086994] pci 0000:00:1d.7: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.087255] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.087396] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.087492] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.087634] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.088064] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.088072] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.088081] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.088090] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.088099] pci 0000:00:1f.2: reg 20 io port: [0x5440-0x544f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.088135] pci 0000:00:1f.2: PME# supported from D3hot Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089002] pci 0000:00:1f.2: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089151] pci 0000:00:1f.3: reg 20 io port: [0x5420-0x543f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089243] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089249] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089460] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0000000-0xd000ffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089552] pci 0000:05:00.0: PME# supported from D3hot Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089645] pci 0000:05:00.0: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089808] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd00fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089859] pci 0000:06:01.0: reg 10 32bit mmio: [0xd0100000-0xd0101fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089916] pci 0000:06:01.0: supports D1 D2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089919] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.089998] pci 0000:06:01.0: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090136] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090164] pci 0000:06:04.0: supports D1 D2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090167] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090262] pci 0000:06:04.0: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090397] pci 0000:06:04.1: reg 10 32bit mmio: [0xd0103000-0xd010307f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090468] pci 0000:06:04.1: supports D1 D2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090471] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090566] pci 0000:06:04.1: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090700] pci 0000:06:04.2: reg 10 32bit mmio: [0xd0103400-0xd01034ff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090772] pci 0000:06:04.2: supports D1 D2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090774] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.090868] pci 0000:06:04.2: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091037] pci 0000:06:04.3: reg 10 32bit mmio: [0xd0103800-0xd010387f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091109] pci 0000:06:04.3: supports D1 D2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091112] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091207] pci 0000:06:04.3: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091343] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091414] pci 0000:06:04.4: supports D1 D2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091416] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091510] pci 0000:06:04.4: PME# disabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091659] pci 0000:00:1e.0: transparent bridge Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091753] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091814] pci_bus 0000:00: on NUMA node 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.091820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.092170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.092280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.092389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.092503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.092636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.097774] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.098291] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.098781] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.099307] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.099828] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.100448] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.101006] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.101496] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.102084] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.102232] vgaarb: loaded Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.102503] SCSI subsystem initialized Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.102620] libata version 3.00 loaded. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.102812] usbcore: registered new interface driver usbfs Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.102949] usbcore: registered new interface driver hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.103046] usbcore: registered new device driver usb Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.103392] PCI: Using ACPI for IRQ routing Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.103483] pci 0000:00:1c.0: BAR 7: can't allocate resource Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.103574] pci 0000:00:1c.0: BAR 8: can't allocate resource Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104098] cfg80211: Using static regulatory domain info Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104189] cfg80211: Regulatory domain: US Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104276] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104415] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104509] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104603] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104696] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104789] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.104883] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105012] cfg80211: Calling CRDA for country: US Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105135] NetLabel: Initializing Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105220] NetLabel: domain hash size = 128 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105307] NetLabel: protocols = UNLABELED CIPSOv4 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105407] NetLabel: unlabeled traffic allowed by default Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105577] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.105797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.106988] Switching to clocksource tsc Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.109917] pnp: PnP ACPI init Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.110045] ACPI: bus type pnp registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134036] pnp: PnP ACPI: found 10 devices Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134123] ACPI: ACPI bus type pnp unregistered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134224] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134318] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134413] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134508] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134603] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134698] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134796] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.134893] system 00:06: ioport range 0x800-0x80f has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.135011] system 00:06: ioport range 0x1000-0x107f has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.135105] system 00:06: ioport range 0x1180-0x11bf has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.135198] system 00:06: ioport range 0x1640-0x164f has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.135293] system 00:06: ioport range 0xfe00-0xfefe has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.135386] system 00:06: ioport range 0xff2c-0xff2f has been reserved Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170184] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170277] pci 0000:00:1c.0: IO window: 0x2000-0x2fff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170370] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170465] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170610] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170703] pci 0000:00:1c.1: IO window: 0x3000-0x3fff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170798] pci 0000:00:1c.1: MEM window: 0x44400000-0x445fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.170892] pci 0000:00:1c.1: PREFETCH window: 0x00000044600000-0x000000447fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171056] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171148] pci 0000:00:1c.2: IO window: 0x4000-0x4fff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171242] pci 0000:00:1c.2: MEM window: 0x44800000-0x449fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171337] pci 0000:00:1c.2: PREFETCH window: 0x00000044a00000-0x00000044bfffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171481] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171574] pci 0000:00:1c.3: IO window: 0x6000-0x6fff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171667] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd00fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171761] pci 0000:00:1c.3: PREFETCH window: 0x00000044c00000-0x00000044dfffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.171918] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172021] pci 0000:06:04.0: IO window: 0x007000-0x0070ff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172115] pci 0000:06:04.0: IO window: 0x007400-0x0074ff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172208] pci 0000:06:04.0: PREFETCH window: 0x40000000-0x43ffffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172304] pci 0000:06:04.0: MEM window: 0x48000000-0x4bffffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172400] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172493] pci 0000:00:1e.0: IO window: 0x7000-0x7fff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172587] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172682] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.172789] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173071] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173162] PCI: setting IRQ 11 as level-triggered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173169] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173315] pci 0000:00:1c.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173483] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173573] PCI: setting IRQ 6 as level-triggered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173580] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173722] pci 0000:00:1c.1: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173889] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173991] PCI: setting IRQ 10 as level-triggered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.173998] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174141] pci 0000:00:1c.2: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174312] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174404] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174547] pci 0000:00:1c.3: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174554] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174648] pci 0000:00:1e.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174663] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174807] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174811] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174814] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174817] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174821] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174824] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174828] pci_bus 0000:03: resource 1 mem: [0x44400000-0x445fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174831] pci_bus 0000:03: resource 2 pref mem [0x44600000-0x447fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174834] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174837] pci_bus 0000:04: resource 1 mem: [0x44800000-0x449fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174841] pci_bus 0000:04: resource 2 pref mem [0x44a00000-0x44bfffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174844] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174847] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd00fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174851] pci_bus 0000:05: resource 2 pref mem [0x44c00000-0x44dfffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174854] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174857] pci_bus 0000:06: resource 1 mem: [0xd0100000-0xd01fffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174861] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174864] pci_bus 0000:06: resource 3 io: [0x00-0xffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174867] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174870] pci_bus 0000:07: resource 0 io: [0x7000-0x70ff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174873] pci_bus 0000:07: resource 1 io: [0x7400-0x74ff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174877] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174880] pci_bus 0000:07: resource 3 mem: [0x48000000-0x4bffffff] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.174914] NET: Registered protocol family 2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.175100] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.175501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.176410] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.176712] TCP: Hash tables configured (established 131072 bind 65536) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.176803] TCP reno registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177020] NET: Registered protocol family 1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177216] RPC: Registered udp transport module. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177305] RPC: Registered tcp transport module. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177393] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177496] pci 0000:00:02.0: Boot video device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177510] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177513] pci 0000:00:1d.0: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177532] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177534] pci 0000:00:1d.1: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177552] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177555] pci 0000:00:1d.2: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177573] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177575] pci 0000:00:1d.3: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.177767] Simple Boot Flag at 0x36 set to 0x1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.178500] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.178635] Microcode Update Driver: v2.00 , Peter Oruba Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.178774] Scanning for low memory corruption every 60 seconds Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.179249] audit: initializing netlink socket (disabled) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.179354] type=2000 audit(1278939032.178:1): initialized Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.191659] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.194872] VFS: Disk quotas dquot_6.5.2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.195070] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.195938] NTFS driver 2.1.29 [Flags: R/O]. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.196346] msgmni has been set to 1762 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.196635] cryptomgr_test used greatest stack depth: 6980 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.197289] alg: No test for stdrng (krng) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.197513] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.197652] io scheduler noop registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.197738] io scheduler anticipatory registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.197825] io scheduler deadline registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.198020] io scheduler cfq registered (default) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.198244] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.198444] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.198637] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.198831] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.199058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.202852] Non-volatile memory driver v1.3 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.203001] intel_rng: FWH not detected Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.203088] Linux agpgart interface v0.103 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.203187] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.203560] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.206380] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.208794] ACPI: AC Adapter [ACAD] (on-line) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.209066] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.209250] ACPI: Lid Switch [LID] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.209415] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.209557] ACPI: Sleep Button [SLPB] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.209721] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.209863] ACPI: Power Button [PWRB] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.210066] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.210205] ACPI: Power Button [PWRF] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.210695] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.210840] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.211757] Marking TSC unstable due to TSC halts in idle Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.211944] Switching to clocksource hpet Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.212078] processor LNXCPU:00: registered as cooling_device0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.240030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.240174] thermal LNXTHERM:01: registered as thermal_zone0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.240469] ACPI: Thermal Zone [TZ00] (33 C) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.250074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.250173] ACPI: Thermal Zone [TZ01] (33 C) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.250358] [drm] Initialized drm 1.1.0 20060810 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.250466] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.251592] i915 0000:00:02.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.254306] [drm] set up 7M of stolen space Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.688379] ACPI: Battery Slot [BAT1] (battery absent) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 0.849611] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.077551] [drm] LVDS-8: set mode 1280x800 1d Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.109482] Console: switching to colour frame buffer device 160x50 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.114925] fb0: inteldrmfb frame buffer device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.114968] registered panic notifier Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.115028] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.115153] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.117630] brd: module loaded Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.118653] loop: module loaded Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.118767] input: Macintosh mouse button emulation as /devices/virtual/input/input5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.119222] ata_piix 0000:00:1f.2: version 2.13 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.119245] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.119328] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.270040] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.270109] scsi0 : ata_piix Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.270281] scsi1 : ata_piix Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.271517] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.271584] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272181] console [netcon0] enabled Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272218] netconsole: network logging started Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272453] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272655] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272711] PCI: setting IRQ 5 as level-triggered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272718] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272809] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272813] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272876] drivers/usb/core/inode.c: creating file 'devices' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272880] drivers/usb/core/inode.c: creating file '001' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.272952] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.273058] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.273064] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.273082] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.273152] ehci_hcd 0000:00:1d.7: debug port 1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.273200] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.277081] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.277084] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.277098] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.277154] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.281047] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.287026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.288298] usb usb1: default language 0x0409 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.288307] usb usb1: udev 1, busnum 1, minor = 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.288309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.289592] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.290925] usb usb1: Product: EHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.292267] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.293660] usb usb1: SerialNumber: 0000:00:1d.7 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.295113] usb usb1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.295154] usb usb1: usb_probe_device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.295157] usb usb1: configuration #1 chosen from 1 choice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.296620] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.296637] usb 1-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.296679] hub 1-0:1.0: usb_probe_interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.296681] hub 1-0:1.0: usb_probe_interface - got id Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.296684] hub 1-0:1.0: USB hub found Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.298174] hub 1-0:1.0: 8 ports detected Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299674] hub 1-0:1.0: standalone hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299676] hub 1-0:1.0: no power switching (usb 1.0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299679] hub 1-0:1.0: individual port over-current protection Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299682] hub 1-0:1.0: power on to power good time: 20ms Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299687] hub 1-0:1.0: local power source is good Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299690] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299730] drivers/usb/core/inode.c: creating file '001' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.299791] uhci_hcd: USB Universal Host Controller Interface driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.301399] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.303043] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.303047] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.304708] drivers/usb/core/inode.c: creating file '002' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.304765] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.306484] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.308212] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.308215] uhci_hcd 0000:00:1d.0: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.308232] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.308243] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.310058] usb usb2: default language 0x0409 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.310065] usb usb2: udev 1, busnum 2, minor = 128 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.310068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.311886] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.313759] usb usb2: Product: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.315635] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.317562] usb usb2: SerialNumber: 0000:00:1d.0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.319515] usb usb2: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.319554] usb usb2: usb_probe_device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.319557] usb usb2: configuration #1 chosen from 1 choice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.321475] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.321492] usb 2-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.321528] hub 2-0:1.0: usb_probe_interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.321531] hub 2-0:1.0: usb_probe_interface - got id Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.321533] hub 2-0:1.0: USB hub found Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.323438] hub 2-0:1.0: 2 ports detected Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325325] hub 2-0:1.0: standalone hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325328] hub 2-0:1.0: no power switching (usb 1.0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325330] hub 2-0:1.0: individual port over-current protection Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325333] hub 2-0:1.0: power on to power good time: 2ms Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325337] hub 2-0:1.0: local power source is good Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325340] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325359] drivers/usb/core/inode.c: creating file '001' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.325393] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.327334] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.327338] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.329243] drivers/usb/core/inode.c: creating file '003' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.329300] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.331218] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.333126] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.333129] uhci_hcd 0000:00:1d.1: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.333145] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.333157] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.335078] usb usb3: default language 0x0409 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.335085] usb usb3: udev 1, busnum 3, minor = 256 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.335088] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.336969] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.338857] usb usb3: Product: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.340716] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.342613] usb usb3: SerialNumber: 0000:00:1d.1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.344526] usb usb3: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.344565] usb usb3: usb_probe_device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.344568] usb usb3: configuration #1 chosen from 1 choice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.346469] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.346485] usb 3-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.346522] hub 3-0:1.0: usb_probe_interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.346525] hub 3-0:1.0: usb_probe_interface - got id Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.346527] hub 3-0:1.0: USB hub found Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.348410] hub 3-0:1.0: 2 ports detected Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350273] hub 3-0:1.0: standalone hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350275] hub 3-0:1.0: no power switching (usb 1.0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350278] hub 3-0:1.0: individual port over-current protection Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350280] hub 3-0:1.0: power on to power good time: 2ms Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350285] hub 3-0:1.0: local power source is good Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350287] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350306] drivers/usb/core/inode.c: creating file '001' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.350340] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.352257] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.352261] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.354153] drivers/usb/core/inode.c: creating file '004' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.354209] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.356099] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.357952] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.357955] uhci_hcd 0000:00:1d.2: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.357972] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.357984] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.359871] usb usb4: default language 0x0409 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.359878] usb usb4: udev 1, busnum 4, minor = 384 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.359881] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.361756] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.363657] usb usb4: Product: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.365562] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.367475] usb usb4: SerialNumber: 0000:00:1d.2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.369397] usb usb4: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.369437] usb usb4: usb_probe_device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.369440] usb usb4: configuration #1 chosen from 1 choice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.371341] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.371359] usb 4-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.371396] hub 4-0:1.0: usb_probe_interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.371399] hub 4-0:1.0: usb_probe_interface - got id Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.371401] hub 4-0:1.0: USB hub found Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.373289] hub 4-0:1.0: 2 ports detected Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375150] hub 4-0:1.0: standalone hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375152] hub 4-0:1.0: no power switching (usb 1.0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375154] hub 4-0:1.0: individual port over-current protection Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375157] hub 4-0:1.0: power on to power good time: 2ms Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375162] hub 4-0:1.0: local power source is good Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375164] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375180] drivers/usb/core/inode.c: creating file '001' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.375215] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.377137] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.377141] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.379048] drivers/usb/core/inode.c: creating file '005' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.379106] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.381034] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.382955] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.382957] uhci_hcd 0000:00:1d.3: Performing full reset Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.382973] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.382984] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.384926] usb usb5: default language 0x0409 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.384934] usb usb5: udev 1, busnum 5, minor = 512 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.384937] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.386842] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.388756] usb usb5: Product: UHCI Host Controller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.390659] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.392558] usb usb5: SerialNumber: 0000:00:1d.3 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.394494] usb usb5: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.394533] usb usb5: usb_probe_device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.394536] usb usb5: configuration #1 chosen from 1 choice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.396441] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.396459] usb 5-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.396496] hub 5-0:1.0: usb_probe_interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.396499] hub 5-0:1.0: usb_probe_interface - got id Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.396501] hub 5-0:1.0: USB hub found Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.398393] hub 5-0:1.0: 2 ports detected Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400271] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400275] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400288] hub 5-0:1.0: standalone hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400290] hub 5-0:1.0: no power switching (usb 1.0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400292] hub 5-0:1.0: individual port over-current protection Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400295] hub 5-0:1.0: power on to power good time: 2ms Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400299] hub 5-0:1.0: local power source is good Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400302] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400318] drivers/usb/core/inode.c: creating file '001' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.400386] Initializing USB Mass Storage driver... Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.402319] usbcore: registered new interface driver usb-storage Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.404203] USB Mass Storage support registered. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.406137] usbcore: registered new interface driver libusual Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.408128] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.411620] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.413637] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.415572] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.417546] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.419463] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.421364] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.423746] mice: PS/2 mouse device common for all mice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.425589] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.426059] rtc_cmos 00:07: RTC can wake from S4 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.428447] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.430328] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.432170] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.434290] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.436310] i2c /dev entries driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.438622] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.441104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.443103] ata1.00: configured for UDMA/100 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.445127] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.447703] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.449788] cpuidle: using governor ladder Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.452231] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.452260] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.454633] sd 0:0:0:0: [sda] Write Protect is off Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.456614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.456655] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.458946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.461328] sda: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.461628] cpuidle: using governor menu Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.466818] usbcore: registered new interface driver hiddev Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.468956] usbcore: registered new interface driver usbhid Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.471000] usbhid: v2.6:USB HID core driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.473109] GACT probability on Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.475064] Mirror/redirect action on Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.477129] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.477402] netem: version 1.2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.479361] u32 classifier Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.481282] Performance counters on Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.483185] input device check on Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.485121] Actions configured Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.486981] Netfilter messages via NETLINK v0.30. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.489126] sda1 sda2 sda3 sda4 < Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.489318] ata2.00: configured for UDMA/33 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.493116] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.495409] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.497422] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.499373] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.501415] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.501456] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.501465] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.501475] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.501769] ctnetlink v0.93: registering with nfnetlink. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.503801] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.505810] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.507812] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.509771] sda5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.510165] xt_time: kernel timezone is -0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.514549] IPv4 over IPv4 tunneling driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.516678] sda6 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.517197] GRE over IPv4 tunneling driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.522083] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.524336] ClusterIP Version 0.8 loaded successfully Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.526517] arp_tables: (C) 2002 David S. Miller Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.528750] TCP bic registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.530744] TCP cubic registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.532730] TCP westwood registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.534670] TCP highspeed registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.536541] TCP hybla registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.538361] TCP htcp registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.540131] TCP vegas registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.541882] TCP veno registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.543595] TCP scalable registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.545251] TCP lp registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.546895] TCP yeah registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.548496] TCP illinois registered Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.550090] Initializing XFRM netlink socket Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.551695] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.553287] Uniform CD-ROM driver Revision: 3.20 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.554899] sda7 > Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.556501] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.556525] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.556937] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.557144] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.559165] sd 0:0:0:0: [sda] Attached SCSI disk Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.560804] NET: Registered protocol family 17 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.562536] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.564384] PM: Resume from disk failed. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.564400] registered taskstats version 1 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.566568] Magic number: 2:965:834 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.601050] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.602034] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.602044] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.602052] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.706048] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.808046] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.950944] usb 5-1: skipped 1 descriptor after interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.955940] usb 5-1: default language 0x0409 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.973941] usb 5-1: udev 2, busnum 5, minor = 513 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.973943] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.975704] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.977483] usb 5-1: Product: Compact Optical Mouse 500 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.979257] usb 5-1: Manufacturer: Microsoft Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.981066] usb 5-1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.981116] usb 5-1: usb_probe_device Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.981120] usb 5-1: configuration #1 chosen from 1 choice Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.995940] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.995957] usb 5-1:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.996031] usbhid 5-1:1.0: usb_probe_interface Jul 12 12:50:57 OnlyTux-Poland kernel: [ 1.996034] usbhid 5-1:1.0: usb_probe_interface - got id Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.010337] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.012373] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.014364] drivers/usb/core/inode.c: creating file '002' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.102044] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.134618] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.173817] kjournald starting. Commit interval 5 seconds Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.175768] EXT3-fs: mounted filesystem with writeback data mode. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.177687] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.179593] Freeing unused kernel memory: 316k freed Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.181670] Write protecting the kernel text: 3548k Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.183587] Write protecting the kernel read-only data: 1700k Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.454047] usb usb2: suspend_rh (auto-stop) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.454074] usb usb3: suspend_rh (auto-stop) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.454100] usb usb4: suspend_rh (auto-stop) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.461051] async/0 used greatest stack depth: 6660 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 2.558053] async/1 used greatest stack depth: 6600 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.525561] stty used greatest stack depth: 6444 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704063] hub 2-0:1.0: hub_suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704072] usb usb2: bus auto-suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704075] usb usb2: suspend_rh Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704095] hub 3-0:1.0: hub_suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704098] usb usb3: bus auto-suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704100] usb usb3: suspend_rh Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704118] hub 4-0:1.0: hub_suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704121] usb usb4: bus auto-suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704124] usb usb4: suspend_rh Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704140] hub 1-0:1.0: hub_suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704143] usb usb1: bus auto-suspend Jul 12 12:50:57 OnlyTux-Poland kernel: [ 3.704146] ehci_hcd 0000:00:1d.7: suspend root hub Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.855588] udev: starting version 149 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.874166] usb usb2: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.874470] usb 2-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.874867] usb usb3: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.875032] usb 3-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.875422] usb usb4: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.888436] usb 4-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.888955] usb usb5: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.889270] usb 5-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.889359] usb 5-1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.889435] usb 5-1:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.890139] usb usb1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 4.890223] usb 1-0:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.037691] usb usb2: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.038326] usb usb4: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.039195] usb usb3: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.039989] usb usb5: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.040834] usb usb1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.068632] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.068647] ath5k 0000:05:00.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.068678] ath5k 0000:05:00.0: registered as 'phy0' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.537214] usb 5-1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.589560] usb 5-1:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.589661] usb 5-1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.590734] usb 5-1:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.590825] usb 5-1: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.647607] ath: EEPROM regdomain: 0x65 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.647609] ath: EEPROM indicates we should expect a direct regpair map Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.647614] ath: Country alpha2 being used: 00 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.647616] ath: Regpair used: 0x65 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.650357] phy0: Selected rate control algorithm 'minstrel' Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.650804] Registered led device: ath5k-phy0::rx Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.650821] Registered led device: ath5k-phy0::tx Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.650824] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.650921] modprobe used greatest stack depth: 6388 bytes left Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.669889] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.669896] ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI region SMBI [0x5420-0x542f] Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.669899] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.703041] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.703047] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.703060] b44 0000:06:01.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.759159] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.759362] b44.c:v2.0 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.767625] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.811251] usb 5-1:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.812159] usb 5-1:1.0: uevent Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.860656] sdhci: Secure Digital Host Controller Interface driver Jul 12 12:50:57 OnlyTux-Poland kernel: [ 5.860660] sdhci: Copyright(c) Pierre Ossman Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019615] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019633] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019646] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019753] Registered led device: mmc0:: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019817] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019840] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019855] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019862] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019930] Registered led device: mmc1:: Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.019984] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.423304] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.423310] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 6.423344] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 12 12:50:57 OnlyTux-Poland kernel: [ 7.197552] EXT3 FS on sda6, internal journal Jul 12 12:50:57 OnlyTux-Poland kernel: [ 8.413001] kjournald starting. Commit interval 5 seconds Jul 12 12:50:57 OnlyTux-Poland kernel: [ 8.413290] EXT3 FS on sda7, internal journal Jul 12 12:50:57 OnlyTux-Poland kernel: [ 8.413295] EXT3-fs: mounted filesystem with writeback data mode. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 8.468216] NTFS volume version 3.1. Jul 12 12:50:57 OnlyTux-Poland kernel: [ 8.600787] Adding 795176k swap on /dev/sda5. Priority:-1 extents:1 across:795176k Jul 12 12:50:57 OnlyTux-Poland kernel: [ 11.411699] ls used greatest stack depth: 6064 bytes left Jul 12 12:50:58 OnlyTux-Poland kernel: [ 18.563337] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0). Jul 12 12:50:58 OnlyTux-Poland kernel: [ 18.563342] atkbd.c: Use 'setkeycodes e056 ' to make it known. Jul 12 12:50:58 OnlyTux-Poland kernel: [ 18.563435] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0). Jul 12 12:50:58 OnlyTux-Poland kernel: [ 18.563438] atkbd.c: Use 'setkeycodes e056 ' to make it known. Jul 12 12:50:58 OnlyTux-Poland acpid: starting up with proc fs Jul 12 12:50:58 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 12 12:50:58 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 12 12:50:58 OnlyTux-Poland acpid: 1 rule loaded Jul 12 12:50:58 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 12 12:50:58 OnlyTux-Poland acpid: client connected from 3168[0:0] Jul 12 12:50:58 OnlyTux-Poland acpid: 1 client rule loaded Jul 12 12:50:59 OnlyTux-Poland /usr/sbin/gpm[3229]: *** info [daemon/startup.c(136)]: Jul 12 12:50:59 OnlyTux-Poland /usr/sbin/gpm[3229]: Started gpm successfully. Entered daemon mode. Jul 12 12:50:59 OnlyTux-Poland kernel: [ 19.668521] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 12 12:50:59 OnlyTux-Poland /usr/sbin/gpm[3229]: *** info [mice.c(1988)]: Jul 12 12:50:59 OnlyTux-Poland /usr/sbin/gpm[3229]: imps2: Auto-detected intellimouse PS/2 Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.406325] usb usb2: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.406430] usb 2-0:1.0: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.406598] usb usb3: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.406697] usb 3-0:1.0: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.406858] usb usb4: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.406972] usb 4-0:1.0: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.407495] usb usb5: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.407595] usb 5-0:1.0: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.407657] usb 5-1: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.407754] usb 5-1:1.0: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.408533] usb usb1: uevent Jul 12 12:51:00 OnlyTux-Poland kernel: [ 21.408633] usb 1-0:1.0: uevent Jul 12 12:51:01 OnlyTux-Poland acpid: client connected from 3496[102:1002] Jul 12 12:51:01 OnlyTux-Poland acpid: 1 client rule loaded Jul 12 12:51:02 OnlyTux-Poland dhcpcd[4016]: eth0: dhcpcd 4.0.15 starting Jul 12 12:51:02 OnlyTux-Poland dhcpcd[4016]: eth0: broadcasting for a lease Jul 12 12:51:06 OnlyTux-Poland kernel: [ 26.704230] b44: eth0: Link is up at 100 Mbps, full duplex. Jul 12 12:51:06 OnlyTux-Poland kernel: [ 26.704234] b44: eth0: Flow control is off for TX and off for RX. Jul 12 12:51:07 OnlyTux-Poland dhcpcd[4016]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 12 12:51:07 OnlyTux-Poland dhcpcd[4016]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 12 12:51:07 OnlyTux-Poland dhcpcd[4016]: eth0: checking 192.168.1.4 is available on attached networks Jul 12 12:51:12 OnlyTux-Poland dhcpcd[4016]: eth0: leased 192.168.1.4 for 604800 seconds Jul 12 12:51:12 OnlyTux-Poland kernel: [ 32.973281] dhcpcd used greatest stack depth: 6060 bytes left Jul 12 12:51:13 OnlyTux-Poland cron[4228]: (CRON) STARTUP (V5.0) Jul 12 12:51:20 OnlyTux-Poland login[4295]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 12 12:51:23 OnlyTux-Poland acpid: client connected from 4324[0:1000] Jul 12 12:51:23 OnlyTux-Poland acpid: 1 client rule loaded Jul 12 12:51:23 OnlyTux-Poland kernel: [ 44.444777] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:24 OnlyTux-Poland kernel: [ 44.586104] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:24 OnlyTux-Poland kernel: [ 44.863887] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:24 OnlyTux-Poland kernel: [ 45.005154] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:27 OnlyTux-Poland kernel: [ 48.332090] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:27 OnlyTux-Poland kernel: [ 48.473631] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:28 OnlyTux-Poland kernel: [ 48.752231] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:51:28 OnlyTux-Poland kernel: [ 48.893724] [drm] TV-14: set mode NTSC 480i 0 Jul 12 12:52:10 OnlyTux-Poland kernel: [ 90.674457] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 12 12:55:38 OnlyTux-Poland kernel: [ 298.901885] firefox used greatest stack depth: 5592 bytes left Jul 12 12:59:01 OnlyTux-Poland cron[4480]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 13:00:01 OnlyTux-Poland cron[4491]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 13:10:01 OnlyTux-Poland cron[4596]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 13:16:00 OnlyTux-Poland kernel: [ 1520.691684] acroread used greatest stack depth: 5432 bytes left Jul 12 13:20:01 OnlyTux-Poland cron[4702]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 13:25:23 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000001 Jul 12 13:30:01 OnlyTux-Poland cron[4777]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 13:40:01 OnlyTux-Poland cron[4793]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 13:50:01 OnlyTux-Poland cron[4808]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 13:59:01 OnlyTux-Poland cron[4824]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 14:00:01 OnlyTux-Poland cron[4826]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 14:10:01 OnlyTux-Poland cron[4842]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 14:16:55 OnlyTux-Poland kernel: [ 5175.971868] [drm] LVDS-8: set mode 1280x800 1d Jul 12 14:16:55 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000002 Jul 12 14:20:01 OnlyTux-Poland cron[4897]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 14:30:01 OnlyTux-Poland cron[5102]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 14:40:01 OnlyTux-Poland cron[5225]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 14:50:01 OnlyTux-Poland cron[5323]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 14:59:01 OnlyTux-Poland cron[5352]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 15:00:01 OnlyTux-Poland cron[5354]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 15:10:01 OnlyTux-Poland cron[5391]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 15:20:01 OnlyTux-Poland cron[5413]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 15:30:01 OnlyTux-Poland cron[5504]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 15:30:36 OnlyTux-Poland kernel: [ 9597.050477] firefox used greatest stack depth: 5388 bytes left Jul 12 15:40:01 OnlyTux-Poland cron[5532]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 15:50:01 OnlyTux-Poland cron[5572]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 15:57:26 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000003 Jul 12 15:59:01 OnlyTux-Poland cron[5594]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 16:00:01 OnlyTux-Poland cron[5596]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 16:10:01 OnlyTux-Poland cron[5615]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 16:12:04 OnlyTux-Poland kernel: [12084.211090] [drm] LVDS-8: set mode 1280x800 1d Jul 12 16:12:04 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000004 Jul 12 16:12:14 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000005 Jul 12 16:20:01 OnlyTux-Poland cron[5638]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 16:30:01 OnlyTux-Poland cron[5657]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 16:40:01 OnlyTux-Poland cron[5676]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 16:50:01 OnlyTux-Poland cron[5695]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 16:59:01 OnlyTux-Poland cron[5714]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 17:00:01 OnlyTux-Poland cron[5716]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 17:10:01 OnlyTux-Poland cron[5735]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 17:20:01 OnlyTux-Poland cron[5753]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 17:30:01 OnlyTux-Poland cron[5772]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 17:40:01 OnlyTux-Poland cron[5791]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 17:50:01 OnlyTux-Poland cron[5809]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 17:59:01 OnlyTux-Poland cron[5827]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 18:00:01 OnlyTux-Poland cron[5829]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 18:10:01 OnlyTux-Poland cron[5847]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 18:20:01 OnlyTux-Poland cron[5865]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 18:30:01 OnlyTux-Poland cron[5884]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 18:40:01 OnlyTux-Poland cron[5903]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 18:50:01 OnlyTux-Poland cron[5921]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 18:59:01 OnlyTux-Poland cron[5939]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 19:00:01 OnlyTux-Poland cron[5941]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 19:10:01 OnlyTux-Poland cron[5960]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 19:20:01 OnlyTux-Poland cron[5979]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 19:30:01 OnlyTux-Poland cron[5997]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 19:40:01 OnlyTux-Poland cron[6015]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 19:45:44 OnlyTux-Poland kernel: [24905.171188] [drm] LVDS-8: set mode 1280x800 1d Jul 12 19:45:44 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000006 Jul 12 19:47:27 OnlyTux-Poland kernel: [25007.763544] ssh used greatest stack depth: 5328 bytes left Jul 12 19:50:01 OnlyTux-Poland cron[6092]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 19:59:01 OnlyTux-Poland cron[6126]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 20:00:01 OnlyTux-Poland cron[6128]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 20:10:01 OnlyTux-Poland cron[6151]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 20:10:05 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000007 Jul 12 20:20:01 OnlyTux-Poland cron[6172]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 20:30:01 OnlyTux-Poland cron[6191]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 20:40:01 OnlyTux-Poland cron[6213]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 20:43:53 OnlyTux-Poland kernel: [28394.035373] [drm] LVDS-8: set mode 1280x800 1d Jul 12 20:43:53 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000008 Jul 12 20:50:01 OnlyTux-Poland cron[6242]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 20:59:01 OnlyTux-Poland cron[6262]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 21:00:01 OnlyTux-Poland cron[6265]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 21:10:01 OnlyTux-Poland cron[6286]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 21:12:25 OnlyTux-Poland su[6305]: Successful su for root by onlyus Jul 12 21:12:25 OnlyTux-Poland su[6305]: + /dev/pts/2 onlyus:root Jul 12 21:12:25 OnlyTux-Poland su[6305]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 12 21:13:35 OnlyTux-Poland kernel: [30175.970834] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:13:35 OnlyTux-Poland kernel: [30176.112900] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:13:35 OnlyTux-Poland kernel: [30176.428982] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:13:36 OnlyTux-Poland kernel: [30176.571240] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:14:29 OnlyTux-Poland kernel: [30229.724192] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:14:29 OnlyTux-Poland kernel: [30229.867415] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:14:29 OnlyTux-Poland kernel: [30230.153343] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:14:29 OnlyTux-Poland kernel: [30230.296815] [drm] TV-14: set mode NTSC 480i 0 Jul 12 21:20:01 OnlyTux-Poland cron[6747]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 21:30:01 OnlyTux-Poland cron[7126]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 21:40:01 OnlyTux-Poland cron[7500]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 21:50:01 OnlyTux-Poland cron[7858]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 21:59:01 OnlyTux-Poland cron[8274]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 22:00:01 OnlyTux-Poland cron[8351]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 22:06:59 OnlyTux-Poland su[6305]: pam_unix(su:session): session closed for user root Jul 12 22:07:11 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000009 Jul 12 22:10:01 OnlyTux-Poland cron[8630]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 22:20:01 OnlyTux-Poland cron[8650]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 22:30:01 OnlyTux-Poland cron[8669]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 22:40:01 OnlyTux-Poland cron[8688]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 22:40:46 OnlyTux-Poland kernel: [35406.755060] [drm] LVDS-8: set mode 1280x800 1d Jul 12 22:40:46 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000a Jul 12 22:50:01 OnlyTux-Poland cron[8792]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 22:52:11 OnlyTux-Poland su[8816]: Successful su for root by onlyus Jul 12 22:52:11 OnlyTux-Poland su[8816]: + /dev/pts/0 onlyus:root Jul 12 22:52:11 OnlyTux-Poland su[8816]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 12 22:59:01 OnlyTux-Poland cron[8877]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 12 22:59:56 OnlyTux-Poland su[8816]: pam_unix(su:session): session closed for user root Jul 12 23:00:01 OnlyTux-Poland cron[8882]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 23:00:07 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000b Jul 12 23:10:01 OnlyTux-Poland cron[8902]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 23:17:09 OnlyTux-Poland kernel: [37589.954171] [drm] LVDS-8: set mode 1280x800 1d Jul 12 23:17:09 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000c Jul 12 23:18:52 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000d Jul 12 23:19:32 OnlyTux-Poland kernel: [37732.467575] [drm] LVDS-8: set mode 1280x800 1d Jul 12 23:19:32 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000e Jul 12 23:20:01 OnlyTux-Poland cron[9000]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 23:22:54 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000f Jul 12 23:30:01 OnlyTux-Poland cron[9071]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 23:30:11 OnlyTux-Poland kernel: [38372.115510] [drm] LVDS-8: set mode 1280x800 1d Jul 12 23:30:11 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000010 Jul 12 23:40:01 OnlyTux-Poland cron[9134]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 23:43:09 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000011 Jul 12 23:49:49 OnlyTux-Poland kernel: [39549.263322] [drm] LVDS-8: set mode 1280x800 1d Jul 12 23:49:49 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000012 Jul 12 23:50:01 OnlyTux-Poland cron[9211]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 12 23:59:01 OnlyTux-Poland cron[9233]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 00:00:01 OnlyTux-Poland cron[9235]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 00:10:01 OnlyTux-Poland cron[9263]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 00:20:01 OnlyTux-Poland cron[9321]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 00:26:45 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000013 Jul 13 00:26:48 OnlyTux-Poland kernel: [41768.642219] [drm] LVDS-8: set mode 1280x800 1d Jul 13 00:26:48 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000014 Jul 13 00:29:07 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000015 Jul 13 00:30:01 OnlyTux-Poland cron[9463]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 00:40:01 OnlyTux-Poland cron[9482]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 00:50:01 OnlyTux-Poland cron[9501]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 00:50:57 OnlyTux-Poland syslog-ng[2990]: Log statistics; processed='src.internal(src#1)=1', stamp='src.internal(src#1)=1278931857', processed='global(payload_reallocs)=0', processed='global(msg_clones)=0', processed='center(queued)=0', processed='global(sdata_updates)=0', processed='center(received)=0', processed='destination(console_all)=1046', processed='source(src)=1046', processed='destination(messages)=1046' Jul 13 00:59:01 OnlyTux-Poland cron[9520]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 01:00:01 OnlyTux-Poland cron[9523]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 01:10:01 OnlyTux-Poland cron[9542]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 01:20:01 OnlyTux-Poland cron[9561]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 01:30:01 OnlyTux-Poland cron[9580]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 01:38:02 OnlyTux-Poland kernel: [46043.093877] [drm] LVDS-8: set mode 1280x800 1d Jul 13 01:38:02 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000016 Jul 13 01:39:11 OnlyTux-Poland su[9614]: Successful su for root by onlyus Jul 13 01:39:11 OnlyTux-Poland su[9614]: + /dev/pts/0 onlyus:root Jul 13 01:39:11 OnlyTux-Poland su[9614]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 01:40:01 OnlyTux-Poland cron[9693]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 01:42:04 OnlyTux-Poland kernel: [46285.328130] [drm] TV-14: set mode NTSC 480i 0 Jul 13 01:42:04 OnlyTux-Poland kernel: [46285.470286] [drm] TV-14: set mode NTSC 480i 0 Jul 13 01:42:05 OnlyTux-Poland kernel: [46285.753184] [drm] TV-14: set mode NTSC 480i 0 Jul 13 01:42:05 OnlyTux-Poland kernel: [46285.896270] [drm] TV-14: set mode NTSC 480i 0 Jul 13 01:45:44 OnlyTux-Poland kernel: [46505.309081] java used greatest stack depth: 5188 bytes left Jul 13 01:50:02 OnlyTux-Poland cron[10398]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 01:59:01 OnlyTux-Poland cron[10654]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 02:00:01 OnlyTux-Poland cron[10688]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 02:10:01 OnlyTux-Poland cron[11071]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 02:20:01 OnlyTux-Poland cron[12423]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 02:30:01 OnlyTux-Poland cron[13805]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 02:40:01 OnlyTux-Poland cron[14351]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 02:50:01 OnlyTux-Poland cron[14996]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 02:59:01 OnlyTux-Poland cron[15612]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 03:00:01 OnlyTux-Poland cron[15634]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 03:09:01 OnlyTux-Poland cron[16428]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.daily) Jul 13 03:10:01 OnlyTux-Poland cron[16436]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 03:12:44 OnlyTux-Poland su[9614]: pam_unix(su:session): session closed for user root Jul 13 03:15:35 OnlyTux-Poland su[16801]: Successful su for root by onlyus Jul 13 03:15:35 OnlyTux-Poland su[16801]: + /dev/pts/0 onlyus:root Jul 13 03:15:35 OnlyTux-Poland su[16801]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 03:15:54 OnlyTux-Poland su[16801]: pam_unix(su:session): session closed for user root Jul 13 03:20:01 OnlyTux-Poland cron[16814]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 03:28:41 OnlyTux-Poland shutdown[16874]: shutting down for system halt Jul 13 03:28:42 OnlyTux-Poland init: Switching to runlevel: 0 Jul 13 03:28:42 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000017 Jul 13 03:28:43 OnlyTux-Poland kernel: [52683.863366] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 03:28:45 OnlyTux-Poland kernel: [52685.579724] [drm] LVDS-8: set mode 1280x800 1d Jul 13 03:28:46 OnlyTux-Poland kernel: [52686.618977] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 03:28:46 OnlyTux-Poland /usr/sbin/gpm[3229]: *** info [mice.c(1988)]: Jul 13 03:28:46 OnlyTux-Poland /usr/sbin/gpm[3229]: imps2: Auto-detected intellimouse PS/2 Jul 13 03:28:49 OnlyTux-Poland dhcpcd[4023]: eth0: received SIGTERM, stopping Jul 13 03:28:50 OnlyTux-Poland kernel: [52690.719955] b44: eth0: powering down PHY Jul 13 03:28:52 OnlyTux-Poland kernel: [52692.793086] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 03:28:54 OnlyTux-Poland acpid: exiting Jul 13 03:28:55 OnlyTux-Poland syslog-ng[2990]: Termination requested via signal, terminating; Jul 13 03:28:55 OnlyTux-Poland syslog-ng[2990]: syslog-ng shutting down; version='3.1.1' Jul 13 13:04:23 OnlyTux-Poland syslog-ng[3001]: syslog-ng starting up; version='3.1.1' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.32-gentoo-r7 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #8 Fri Jul 9 19:41:43 CEST 2010 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] KERNEL supported cpus: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Intel GenuineIntel Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] AMD AuthenticAMD Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] NSC Geode by NSC Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Cyrix CyrixInstead Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Centaur CentaurHauls Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Transmeta GenuineTMx86 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Transmeta TransmetaCPU Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] UMC UMC UMC UMC Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe3000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe3000 page 4k Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe3000 @ 10000-15000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe3000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe3000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] node 0 low ram: 00000000 - 37fe3000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] node 0 bootmap 00011000 - 00018000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037fe3000] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 000165a574] TEXT DATA BSS ==> [0001000000 - 000165a574] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] #3 [000165b000 - 00016610d5] BRK ==> [000165b000 - 00016610d5] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe3 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] early_node_map[3] active PFN ranges Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000000 -> 0x00000001 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe3 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229235 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1562f38, node_mem_map c1662000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223491 pages, LIFO batch:31 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227443 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Memory: 902312k/917388k available (3544k kernel code, 14520k reserved, 2019k data, 316k init, 0k highmem) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e3000 - 0xfffe3000 ( 120 MB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe3000 ( 895 MB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc156f000 - 0xc15be000 ( 316 kB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1376008 - 0xc156eff4 (2019 kB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1376008 (3544 kB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.000000] Detected 1729.165 MHz processor. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.33 BogoMIPS (lpj=1729165) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.001191] Security Framework initialized Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.001286] Mount-cache hash table entries: 512 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002056] Initializing cgroup subsys ns Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002145] Initializing cgroup subsys cpuacct Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002232] Initializing cgroup subsys freezer Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002319] Initializing cgroup subsys net_cls Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002421] CPU: L1 I cache: 32K, L1 D cache: 32K Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002541] CPU: L2 cache: 1024K Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002627] mce: CPU supports 6 MCE banks Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002720] using mwait in idle threads. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002811] Performance Events: no PMU driver, software events only. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.002935] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.003084] Checking 'hlt' instruction... OK. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.007573] ACPI: Core revision 20090903 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.018951] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.020228] khelper used greatest stack depth: 7516 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.020366] khelper used greatest stack depth: 7384 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.020741] Time: 13:03:58 Date: 07/13/10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.020871] NET: Registered protocol family 16 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.021376] ACPI: bus type pci registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.021577] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.021673] PCI: MCFG area at e0000000 reserved in E820 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.021762] PCI: Using MMCONFIG for extended config space Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.021851] PCI: Using configuration type 1 for base access Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.022293] khelper used greatest stack depth: 7216 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.028489] bio: create slab at 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.029378] ACPI: EC: Look up EC in DSDT Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.033419] ACPI: BIOS _OSI(Linux) query ignored Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.034364] ACPI: Interpreter enabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.034459] ACPI: (supports S0 S3 S4 S5) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.034696] ACPI: Using PIC for interrupt routing Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.086407] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.087057] ACPI: No dock devices found. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.087722] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.087932] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.087939] pci 0000:00:02.0: reg 14 io port: [0x5088-0x508f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.087945] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.087951] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088022] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088139] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088295] pci 0000:00:1b.0: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088472] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088566] pci 0000:00:1c.0: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088745] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.088839] pci 0000:00:1c.1: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089030] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089124] pci 0000:00:1c.2: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089305] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089398] pci 0000:00:1c.3: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089546] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089611] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089677] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089742] pci 0000:00:1d.3: reg 20 io port: [0x5400-0x541f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089811] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089875] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.089969] pci 0000:00:1d.7: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.090162] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.090301] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.090397] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.090538] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091063] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091072] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091081] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091090] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091098] pci 0000:00:1f.2: reg 20 io port: [0x5440-0x544f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091135] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.091226] pci 0000:00:1f.2: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092060] pci 0000:00:1f.3: reg 20 io port: [0x5420-0x543f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092153] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092159] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092368] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0000000-0xd000ffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092460] pci 0000:05:00.0: PME# supported from D3hot Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092553] pci 0000:05:00.0: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092716] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd00fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092767] pci 0000:06:01.0: reg 10 32bit mmio: [0xd0100000-0xd0101fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092824] pci 0000:06:01.0: supports D1 D2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092826] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.092999] pci 0000:06:01.0: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093135] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093164] pci 0000:06:04.0: supports D1 D2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093166] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093262] pci 0000:06:04.0: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093396] pci 0000:06:04.1: reg 10 32bit mmio: [0xd0103000-0xd010307f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093468] pci 0000:06:04.1: supports D1 D2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093470] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093565] pci 0000:06:04.1: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093699] pci 0000:06:04.2: reg 10 32bit mmio: [0xd0103400-0xd01034ff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093770] pci 0000:06:04.2: supports D1 D2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093773] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.093868] pci 0000:06:04.2: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094018] pci 0000:06:04.3: reg 10 32bit mmio: [0xd0103800-0xd010387f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094090] pci 0000:06:04.3: supports D1 D2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094093] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094187] pci 0000:06:04.3: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094324] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094395] pci 0000:06:04.4: supports D1 D2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094398] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094491] pci 0000:06:04.4: PME# disabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094639] pci 0000:00:1e.0: transparent bridge Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094733] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094794] pci_bus 0000:00: on NUMA node 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.094800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.095140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.095252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.095361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.095476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.095608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.100750] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.101255] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.101743] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.102270] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.102794] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.103414] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.103936] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.104441] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.105035] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.105183] vgaarb: loaded Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.105451] SCSI subsystem initialized Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.105570] libata version 3.00 loaded. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.105764] usbcore: registered new interface driver usbfs Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.105897] usbcore: registered new interface driver hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.106042] usbcore: registered new device driver usb Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.106387] PCI: Using ACPI for IRQ routing Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.106476] pci 0000:00:1c.0: BAR 7: can't allocate resource Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.106566] pci 0000:00:1c.0: BAR 8: can't allocate resource Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107061] cfg80211: Using static regulatory domain info Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107151] cfg80211: Regulatory domain: US Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107237] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107375] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107470] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107563] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107656] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107749] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107841] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.107937] cfg80211: Calling CRDA for country: US Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.108025] NetLabel: Initializing Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.108111] NetLabel: domain hash size = 128 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.108198] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.108299] NetLabel: unlabeled traffic allowed by default Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.108469] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.108687] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.109988] Switching to clocksource tsc Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.111934] pnp: PnP ACPI init Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.112059] ACPI: bus type pnp registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136078] pnp: PnP ACPI: found 10 devices Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136167] ACPI: ACPI bus type pnp unregistered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136265] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136359] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136454] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136549] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136643] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136737] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136834] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.136932] system 00:06: ioport range 0x800-0x80f has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.137036] system 00:06: ioport range 0x1000-0x107f has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.137129] system 00:06: ioport range 0x1180-0x11bf has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.137221] system 00:06: ioport range 0x1640-0x164f has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.137314] system 00:06: ioport range 0xfe00-0xfefe has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.137408] system 00:06: ioport range 0xff2c-0xff2f has been reserved Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172205] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172299] pci 0000:00:1c.0: IO window: 0x2000-0x2fff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172393] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172487] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172631] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172723] pci 0000:00:1c.1: IO window: 0x3000-0x3fff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172816] pci 0000:00:1c.1: MEM window: 0x44400000-0x445fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.172911] pci 0000:00:1c.1: PREFETCH window: 0x00000044600000-0x000000447fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173068] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173161] pci 0000:00:1c.2: IO window: 0x4000-0x4fff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173255] pci 0000:00:1c.2: MEM window: 0x44800000-0x449fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173350] pci 0000:00:1c.2: PREFETCH window: 0x00000044a00000-0x00000044bfffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173495] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173587] pci 0000:00:1c.3: IO window: 0x6000-0x6fff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173682] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd00fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173776] pci 0000:00:1c.3: PREFETCH window: 0x00000044c00000-0x00000044dfffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.173932] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174038] pci 0000:06:04.0: IO window: 0x007000-0x0070ff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174132] pci 0000:06:04.0: IO window: 0x007400-0x0074ff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174227] pci 0000:06:04.0: PREFETCH window: 0x40000000-0x43ffffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174322] pci 0000:06:04.0: MEM window: 0x48000000-0x4bffffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174418] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174510] pci 0000:00:1e.0: IO window: 0x7000-0x7fff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174603] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174697] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.174803] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175082] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175173] PCI: setting IRQ 11 as level-triggered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175180] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175328] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175498] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175588] PCI: setting IRQ 6 as level-triggered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175595] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175737] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175905] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.175995] PCI: setting IRQ 10 as level-triggered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176001] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176155] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176324] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176416] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176558] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176564] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176659] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176673] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176817] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176821] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176824] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176828] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176831] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176835] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176838] pci_bus 0000:03: resource 1 mem: [0x44400000-0x445fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176841] pci_bus 0000:03: resource 2 pref mem [0x44600000-0x447fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176844] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176848] pci_bus 0000:04: resource 1 mem: [0x44800000-0x449fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176851] pci_bus 0000:04: resource 2 pref mem [0x44a00000-0x44bfffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176854] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176857] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd00fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176861] pci_bus 0000:05: resource 2 pref mem [0x44c00000-0x44dfffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176864] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176867] pci_bus 0000:06: resource 1 mem: [0xd0100000-0xd01fffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176871] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176874] pci_bus 0000:06: resource 3 io: [0x00-0xffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176877] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176881] pci_bus 0000:07: resource 0 io: [0x7000-0x70ff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176884] pci_bus 0000:07: resource 1 io: [0x7400-0x74ff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176887] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176890] pci_bus 0000:07: resource 3 mem: [0x48000000-0x4bffffff] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.176925] NET: Registered protocol family 2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.177110] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.177515] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.178425] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.178727] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.178820] TCP reno registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179002] NET: Registered protocol family 1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179229] RPC: Registered udp transport module. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179319] RPC: Registered tcp transport module. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179406] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179508] pci 0000:00:02.0: Boot video device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179523] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179526] pci 0000:00:1d.0: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179544] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179547] pci 0000:00:1d.1: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179565] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179568] pci 0000:00:1d.2: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179586] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179589] pci 0000:00:1d.3: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.179781] Simple Boot Flag at 0x36 set to 0x1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.180516] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.180650] Microcode Update Driver: v2.00 , Peter Oruba Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.180792] Scanning for low memory corruption every 60 seconds Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.181261] audit: initializing netlink socket (disabled) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.181365] type=2000 audit(1279026238.181:1): initialized Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.193662] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.196878] VFS: Disk quotas dquot_6.5.2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.197072] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.197945] NTFS driver 2.1.29 [Flags: R/O]. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.198343] msgmni has been set to 1762 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.198628] cryptomgr_test used greatest stack depth: 6980 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.199300] alg: No test for stdrng (krng) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.199528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.199668] io scheduler noop registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.199755] io scheduler anticipatory registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.199843] io scheduler deadline registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.200046] io scheduler cfq registered (default) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.200271] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.200470] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.200662] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.200859] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.201091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.204894] Non-volatile memory driver v1.3 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.205035] intel_rng: FWH not detected Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.205122] Linux agpgart interface v0.103 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.205221] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.205588] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.208410] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.213124] ACPI: AC Adapter [ACAD] (on-line) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.213379] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.213565] ACPI: Lid Switch [LID] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.213729] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.213872] ACPI: Sleep Button [SLPB] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.214047] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.214187] ACPI: Power Button [PWRB] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.214369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.214509] ACPI: Power Button [PWRF] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.215020] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.215165] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.216085] Marking TSC unstable due to TSC halts in idle Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.216273] Switching to clocksource hpet Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.216385] processor LNXCPU:00: registered as cooling_device0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.246698] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.246794] ACPI: Thermal Zone [TZ00] (34 C) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.254076] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.254174] ACPI: Thermal Zone [TZ01] (34 C) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.254494] [drm] Initialized drm 1.1.0 20060810 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.254602] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.255726] i915 0000:00:02.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.258528] [drm] set up 7M of stolen space Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.381929] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 0.853619] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.081607] [drm] LVDS-8: set mode 1280x800 1d Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.113563] Console: switching to colour frame buffer device 160x50 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.119022] fb0: inteldrmfb frame buffer device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.119065] registered panic notifier Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.119106] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.119231] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.121713] brd: module loaded Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.122720] loop: module loaded Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.122837] input: Macintosh mouse button emulation as /devices/virtual/input/input5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.123289] ata_piix 0000:00:1f.2: version 2.13 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.123312] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.123396] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.274041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.274107] scsi0 : ata_piix Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.274275] scsi1 : ata_piix Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.275516] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.275584] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276177] console [netcon0] enabled Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276215] netconsole: network logging started Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276451] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276653] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276709] PCI: setting IRQ 5 as level-triggered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276716] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276807] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276811] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276873] drivers/usb/core/inode.c: creating file 'devices' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276878] drivers/usb/core/inode.c: creating file '001' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.276949] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.277055] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.277061] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.277080] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.277149] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.277197] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.281091] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.281094] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.281107] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.281163] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.285055] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.291026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.292301] usb usb1: default language 0x0409 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.292310] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.292312] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.293599] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.294920] usb usb1: Product: EHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.296286] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.297680] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.299139] usb usb1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.299180] usb usb1: usb_probe_device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.299183] usb usb1: configuration #1 chosen from 1 choice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.300648] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.300664] usb 1-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.300707] hub 1-0:1.0: usb_probe_interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.300710] hub 1-0:1.0: usb_probe_interface - got id Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.300713] hub 1-0:1.0: USB hub found Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.302206] hub 1-0:1.0: 8 ports detected Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303716] hub 1-0:1.0: standalone hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303718] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303720] hub 1-0:1.0: individual port over-current protection Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303723] hub 1-0:1.0: power on to power good time: 20ms Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303728] hub 1-0:1.0: local power source is good Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303731] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303771] drivers/usb/core/inode.c: creating file '001' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.303831] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.305443] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.307091] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.307095] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.308759] drivers/usb/core/inode.c: creating file '002' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.308816] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.310540] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.312271] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.312273] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.312290] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.312300] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.314115] usb usb2: default language 0x0409 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.314123] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.314125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.315949] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.317821] usb usb2: Product: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.319697] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.321625] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.323578] usb usb2: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.323618] usb usb2: usb_probe_device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.323621] usb usb2: configuration #1 chosen from 1 choice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.325537] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.325554] usb 2-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.325591] hub 2-0:1.0: usb_probe_interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.325593] hub 2-0:1.0: usb_probe_interface - got id Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.325596] hub 2-0:1.0: USB hub found Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.327498] hub 2-0:1.0: 2 ports detected Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329387] hub 2-0:1.0: standalone hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329389] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329391] hub 2-0:1.0: individual port over-current protection Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329394] hub 2-0:1.0: power on to power good time: 2ms Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329399] hub 2-0:1.0: local power source is good Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329401] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329419] drivers/usb/core/inode.c: creating file '001' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.329456] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.331398] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.331402] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.333304] drivers/usb/core/inode.c: creating file '003' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.333365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.335286] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.337195] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.337197] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.337214] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.337227] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.339145] usb usb3: default language 0x0409 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.339152] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.339155] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.341043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.342930] usb usb3: Product: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.344783] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.346682] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.348597] usb usb3: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.348636] usb usb3: usb_probe_device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.348639] usb usb3: configuration #1 chosen from 1 choice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.350544] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.350560] usb 3-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.350597] hub 3-0:1.0: usb_probe_interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.350600] hub 3-0:1.0: usb_probe_interface - got id Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.350603] hub 3-0:1.0: USB hub found Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.352484] hub 3-0:1.0: 2 ports detected Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354349] hub 3-0:1.0: standalone hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354351] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354354] hub 3-0:1.0: individual port over-current protection Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354357] hub 3-0:1.0: power on to power good time: 2ms Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354361] hub 3-0:1.0: local power source is good Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354364] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354382] drivers/usb/core/inode.c: creating file '001' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.354418] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.356336] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.356341] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.358233] drivers/usb/core/inode.c: creating file '004' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.358293] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.360187] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.362041] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.362044] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.362060] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.362072] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.363960] usb usb4: default language 0x0409 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.363968] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.363970] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.365842] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.367741] usb usb4: Product: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.369625] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.371539] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.373464] usb usb4: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.373504] usb usb4: usb_probe_device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.373507] usb usb4: configuration #1 chosen from 1 choice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.375409] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.375429] usb 4-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.375465] hub 4-0:1.0: usb_probe_interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.375468] hub 4-0:1.0: usb_probe_interface - got id Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.375470] hub 4-0:1.0: USB hub found Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.377359] hub 4-0:1.0: 2 ports detected Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379218] hub 4-0:1.0: standalone hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379220] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379223] hub 4-0:1.0: individual port over-current protection Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379225] hub 4-0:1.0: power on to power good time: 2ms Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379230] hub 4-0:1.0: local power source is good Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379233] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379249] drivers/usb/core/inode.c: creating file '001' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.379284] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.381204] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.381209] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.383113] drivers/usb/core/inode.c: creating file '005' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.383174] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.385102] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.387021] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.387024] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.387040] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.387051] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.389032] usb usb5: default language 0x0409 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.389039] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.389042] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.390948] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.392865] usb usb5: Product: UHCI Host Controller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.394755] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.396651] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.398588] usb usb5: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.398629] usb usb5: usb_probe_device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.398632] usb usb5: configuration #1 chosen from 1 choice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.400540] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.400558] usb 5-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.400595] hub 5-0:1.0: usb_probe_interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.400598] hub 5-0:1.0: usb_probe_interface - got id Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.400601] hub 5-0:1.0: USB hub found Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.402498] hub 5-0:1.0: 2 ports detected Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404375] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404379] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404392] hub 5-0:1.0: standalone hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404394] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404397] hub 5-0:1.0: individual port over-current protection Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404399] hub 5-0:1.0: power on to power good time: 2ms Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404404] hub 5-0:1.0: local power source is good Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404406] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404422] drivers/usb/core/inode.c: creating file '001' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.404494] Initializing USB Mass Storage driver... Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.406445] usbcore: registered new interface driver usb-storage Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.408344] USB Mass Storage support registered. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.410304] usbcore: registered new interface driver libusual Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.412315] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.418150] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.420166] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.422087] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.424067] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.425983] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.428255] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.430112] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.430315] mice: PS/2 mouse device common for all mice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.432735] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.434573] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.437158] rtc_cmos 00:07: RTC can wake from S4 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.439533] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.441476] ata1.00: configured for UDMA/100 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.443416] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.445379] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.447473] i2c /dev entries driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.449488] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.451520] sd 0:0:0:0: [sda] Write Protect is off Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.453425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.453513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.455567] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.455664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.458072] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.460316] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.462739] sda: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.463416] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.467885] cpuidle: using governor ladder Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.470247] cpuidle: using governor menu Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.473489] usbcore: registered new interface driver hiddev Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.475697] usbcore: registered new interface driver usbhid Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.477701] usbhid: v2.6:USB HID core driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.479760] sda1 sda2 sda3 sda4 < Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.479899] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.481971] GACT probability on Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.483914] Mirror/redirect action on Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.486238] netem: version 1.2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.488173] u32 classifier Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.490090] Performance counters on Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.491975] input device check on Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.493845] Actions configured Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.495694] Netfilter messages via NETLINK v0.30. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.497867] ata2.00: configured for UDMA/33 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.499846] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.501806] sda5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.502254] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.506105] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.508050] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.510061] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.510164] sda6 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.510255] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.512194] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.512203] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.512523] ctnetlink v0.93: registering with nfnetlink. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.514504] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.516500] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.518488] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.520793] xt_time: kernel timezone is -0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.523386] IPv4 over IPv4 tunneling driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.525945] GRE over IPv4 tunneling driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.528161] sda7 > Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.531381] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.533635] ClusterIP Version 0.8 loaded successfully Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.535901] arp_tables: (C) 2002 David S. Miller Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.538066] TCP bic registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.540094] TCP cubic registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.542055] TCP westwood registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.543956] TCP highspeed registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.545824] TCP hybla registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.547652] TCP htcp registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.549451] TCP vegas registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.551206] TCP veno registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.552927] TCP scalable registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.554586] TCP lp registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.556214] TCP yeah registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.557838] TCP illinois registered Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.559405] Initializing XFRM netlink socket Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.560980] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.562600] Uniform CD-ROM driver Revision: 3.20 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.564226] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.564252] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.564549] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.564692] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.566416] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.568152] NET: Registered protocol family 17 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.569873] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.571762] PM: Resume from disk failed. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.571778] registered taskstats version 1 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.573971] Magic number: 2:872:78 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.610050] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.611035] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.611044] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.611052] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.715048] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.817045] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.962048] usb 5-1: skipped 1 descriptor after interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.967045] usb 5-1: default language 0x0409 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.985044] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.985047] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.986804] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.988626] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.990420] usb 5-1: Manufacturer: Microsoft Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.992272] usb 5-1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.992322] usb 5-1: usb_probe_device Jul 13 13:04:23 OnlyTux-Poland kernel: [ 1.992326] usb 5-1: configuration #1 chosen from 1 choice Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.007044] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.007061] usb 5-1:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.007111] usbhid 5-1:1.0: usb_probe_interface Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.007113] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.021404] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.023490] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.025487] drivers/usb/core/inode.c: creating file '002' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.102309] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.134890] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.167697] kjournald starting. Commit interval 5 seconds Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.169652] EXT3-fs: mounted filesystem with writeback data mode. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.171607] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.173579] Freeing unused kernel memory: 316k freed Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.175690] Write protecting the kernel text: 3548k Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.177630] Write protecting the kernel read-only data: 1700k Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.454047] usb usb2: suspend_rh (auto-stop) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.454074] usb usb3: suspend_rh (auto-stop) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.454100] usb usb4: suspend_rh (auto-stop) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.462052] async/0 used greatest stack depth: 6660 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 2.568044] async/1 used greatest stack depth: 6600 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.519452] stty used greatest stack depth: 6444 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704063] hub 2-0:1.0: hub_suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704073] usb usb2: bus auto-suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704076] usb usb2: suspend_rh Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704094] hub 3-0:1.0: hub_suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704098] usb usb3: bus auto-suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704100] usb usb3: suspend_rh Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704117] hub 4-0:1.0: hub_suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704120] usb usb4: bus auto-suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704122] usb usb4: suspend_rh Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704139] hub 1-0:1.0: hub_suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704142] usb usb1: bus auto-suspend Jul 13 13:04:23 OnlyTux-Poland kernel: [ 3.704145] ehci_hcd 0000:00:1d.7: suspend root hub Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.849445] udev: starting version 149 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.868043] usb usb2: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.868268] usb 2-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.868667] usb usb3: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.868802] usb 3-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.885957] usb usb4: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.885984] usb 4-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.886076] usb usb5: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.886094] usb 5-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.886117] usb 5-1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.886136] usb 5-1:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.886304] usb usb1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 4.886322] usb 1-0:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.171606] usb usb2: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.172313] usb usb3: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.173174] usb usb4: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.173972] usb usb5: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.174817] usb usb1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.180646] usb 5-1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.181927] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.181933] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.181946] b44 0000:06:01.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.233827] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.234000] b44.c:v2.0 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.241464] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.241471] ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI region SMBI [0x5420-0x542f] Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.241474] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.242591] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.272044] usb 5-1:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.272146] usb 5-1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.273669] usb 5-1:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.273762] usb 5-1: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.347127] usb 5-1:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.347974] usb 5-1:1.0: uevent Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.352757] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.352771] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.352809] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.901762] ath: EEPROM regdomain: 0x65 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.901765] ath: EEPROM indicates we should expect a direct regpair map Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.901770] ath: Country alpha2 being used: 00 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.901772] ath: Regpair used: 0x65 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.904141] phy0: Selected rate control algorithm 'minstrel' Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.904603] Registered led device: ath5k-phy0::rx Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.904620] Registered led device: ath5k-phy0::tx Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.904624] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.932459] sdhci: Secure Digital Host Controller Interface driver Jul 13 13:04:23 OnlyTux-Poland kernel: [ 5.932463] sdhci: Copyright(c) Pierre Ossman Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008620] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008638] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008651] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008748] Registered led device: mmc0:: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008816] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008837] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008851] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.008859] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.009046] Registered led device: mmc1:: Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.009179] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.445485] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.445492] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.445524] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 13:04:23 OnlyTux-Poland kernel: [ 6.555825] udevd used greatest stack depth: 6132 bytes left Jul 13 13:04:23 OnlyTux-Poland kernel: [ 7.157922] EXT3 FS on sda6, internal journal Jul 13 13:04:23 OnlyTux-Poland kernel: [ 8.362436] kjournald starting. Commit interval 5 seconds Jul 13 13:04:23 OnlyTux-Poland kernel: [ 8.362670] EXT3 FS on sda7, internal journal Jul 13 13:04:23 OnlyTux-Poland kernel: [ 8.362674] EXT3-fs: mounted filesystem with writeback data mode. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 8.417664] NTFS volume version 3.1. Jul 13 13:04:23 OnlyTux-Poland kernel: [ 8.550211] Adding 795176k swap on /dev/sda5. Priority:-1 extents:1 across:795176k Jul 13 13:04:23 OnlyTux-Poland acpid: starting up with proc fs Jul 13 13:04:23 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 13:04:23 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 13:04:23 OnlyTux-Poland acpid: 1 rule loaded Jul 13 13:04:23 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 13:04:24 OnlyTux-Poland acpid: client connected from 3179[0:0] Jul 13 13:04:24 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 13:04:24 OnlyTux-Poland /usr/sbin/gpm[3240]: *** info [daemon/startup.c(136)]: Jul 13 13:04:24 OnlyTux-Poland /usr/sbin/gpm[3240]: Started gpm successfully. Entered daemon mode. Jul 13 13:04:24 OnlyTux-Poland kernel: [ 19.229088] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 13:04:25 OnlyTux-Poland /usr/sbin/gpm[3240]: *** info [mice.c(1988)]: Jul 13 13:04:25 OnlyTux-Poland /usr/sbin/gpm[3240]: imps2: Auto-detected intellimouse PS/2 Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.966878] usb usb2: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.966983] usb 2-0:1.0: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.967396] usb usb3: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.967496] usb 3-0:1.0: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.967660] usb usb4: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.967779] usb 4-0:1.0: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.967943] usb usb5: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.968276] usb 5-0:1.0: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.968342] usb 5-1: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.968441] usb 5-1:1.0: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.969190] usb usb1: uevent Jul 13 13:04:26 OnlyTux-Poland kernel: [ 20.969295] usb 1-0:1.0: uevent Jul 13 13:04:27 OnlyTux-Poland acpid: client connected from 3507[102:1002] Jul 13 13:04:27 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 13:04:28 OnlyTux-Poland dhcpcd[4027]: eth0: dhcpcd 4.0.15 starting Jul 13 13:04:28 OnlyTux-Poland dhcpcd[4027]: eth0: broadcasting for a lease Jul 13 13:04:32 OnlyTux-Poland kernel: [ 26.704234] b44: eth0: Link is up at 100 Mbps, full duplex. Jul 13 13:04:32 OnlyTux-Poland kernel: [ 26.704237] b44: eth0: Flow control is off for TX and off for RX. Jul 13 13:04:40 OnlyTux-Poland dhcpcd[4027]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 13:04:40 OnlyTux-Poland dhcpcd[4027]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 13:04:40 OnlyTux-Poland dhcpcd[4027]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 13:04:46 OnlyTux-Poland dhcpcd[4027]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 13:04:46 OnlyTux-Poland kernel: [ 40.834370] dhcpcd used greatest stack depth: 6128 bytes left Jul 13 13:04:47 OnlyTux-Poland cron[4240]: (CRON) STARTUP (V5.0) Jul 13 13:04:52 OnlyTux-Poland kernel: [ 47.063059] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 13:04:54 OnlyTux-Poland login[4307]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 13 13:04:58 OnlyTux-Poland acpid: client connected from 4335[0:1000] Jul 13 13:04:58 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 13:04:58 OnlyTux-Poland kernel: [ 53.050781] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:04:58 OnlyTux-Poland kernel: [ 53.192374] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:04:59 OnlyTux-Poland kernel: [ 53.470142] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:04:59 OnlyTux-Poland kernel: [ 53.611694] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:05:02 OnlyTux-Poland kernel: [ 57.056992] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:05:02 OnlyTux-Poland kernel: [ 57.198950] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:05:03 OnlyTux-Poland kernel: [ 57.477106] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:05:03 OnlyTux-Poland kernel: [ 57.620758] [drm] TV-14: set mode NTSC 480i 0 Jul 13 13:05:31 OnlyTux-Poland su[4406]: Successful su for root by onlyus Jul 13 13:05:31 OnlyTux-Poland su[4406]: + /dev/pts/0 onlyus:root Jul 13 13:05:31 OnlyTux-Poland su[4406]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 13:05:35 OnlyTux-Poland kernel: [ 90.139977] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 13 13:05:41 OnlyTux-Poland kernel: [ 95.795843] rsync used greatest stack depth: 6088 bytes left Jul 13 13:08:58 OnlyTux-Poland kernel: [ 292.558884] rsync used greatest stack depth: 5452 bytes left Jul 13 13:10:01 OnlyTux-Poland cron[4495]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 13:20:01 OnlyTux-Poland cron[32231]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 13:26:45 OnlyTux-Poland kernel: [ 1359.672273] emerge used greatest stack depth: 5280 bytes left Jul 13 13:30:01 OnlyTux-Poland cron[4062]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 13:30:10 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000001 Jul 13 13:40:01 OnlyTux-Poland cron[28229]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 13:42:54 OnlyTux-Poland kernel: [ 2328.691743] prelink used greatest stack depth: 5220 bytes left Jul 13 13:50:01 OnlyTux-Poland cron[16039]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 13:59:01 OnlyTux-Poland cron[21082]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 14:00:01 OnlyTux-Poland cron[21084]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 14:10:01 OnlyTux-Poland cron[21097]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 14:18:53 OnlyTux-Poland kernel: [ 4487.190152] [drm] LVDS-8: set mode 1280x800 1d Jul 13 14:18:53 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000002 Jul 13 14:20:01 OnlyTux-Poland cron[24475]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 14:21:53 OnlyTux-Poland revdep-rebuild: broken /usr/lib/libmng.so.1.0.0 (requires libjpeg.so.7) Jul 13 14:22:59 OnlyTux-Poland revdep-rebuild: /usr/lib/libmng.so.1.0.0 -> media-libs/libmng Jul 13 14:28:21 OnlyTux-Poland su[31780]: Successful su for root by onlyus Jul 13 14:28:21 OnlyTux-Poland su[31780]: + /dev/pts/2 onlyus:root Jul 13 14:28:21 OnlyTux-Poland su[31780]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 14:29:52 OnlyTux-Poland su[31780]: pam_unix(su:session): session closed for user root Jul 13 14:29:56 OnlyTux-Poland su[32651]: Successful su for root by onlyus Jul 13 14:29:56 OnlyTux-Poland su[32651]: + /dev/pts/2 onlyus:root Jul 13 14:29:56 OnlyTux-Poland su[32651]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 14:30:01 OnlyTux-Poland cron[339]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 14:40:01 OnlyTux-Poland cron[609]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 14:50:01 OnlyTux-Poland cron[630]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 14:59:01 OnlyTux-Poland cron[671]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 15:00:01 OnlyTux-Poland cron[677]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 15:10:01 OnlyTux-Poland cron[4039]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 15:20:01 OnlyTux-Poland cron[7459]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 15:30:01 OnlyTux-Poland cron[10813]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 15:40:01 OnlyTux-Poland cron[14513]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 15:50:01 OnlyTux-Poland cron[18736]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 15:50:48 OnlyTux-Poland kernel: [10002.773036] kjournald starting. Commit interval 5 seconds Jul 13 15:50:48 OnlyTux-Poland kernel: [10002.781601] EXT3 FS on sda2, internal journal Jul 13 15:50:48 OnlyTux-Poland kernel: [10002.781609] EXT3-fs: mounted filesystem with writeback data mode. Jul 13 15:59:01 OnlyTux-Poland cron[18789]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 15:59:53 OnlyTux-Poland kernel: [10547.513990] ssh used greatest stack depth: 5164 bytes left Jul 13 16:00:01 OnlyTux-Poland cron[18791]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 16:10:01 OnlyTux-Poland cron[21046]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 16:20:01 OnlyTux-Poland cron[22505]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 16:30:01 OnlyTux-Poland cron[22782]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 16:40:01 OnlyTux-Poland cron[22828]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 16:42:54 OnlyTux-Poland su[4406]: pam_unix(su:session): session closed for user root Jul 13 16:49:13 OnlyTux-Poland su[22893]: Successful su for root by onlyus Jul 13 16:49:13 OnlyTux-Poland su[22893]: + /dev/pts/0 onlyus:root Jul 13 16:49:13 OnlyTux-Poland su[22893]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 16:50:01 OnlyTux-Poland cron[23124]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 16:52:51 OnlyTux-Poland su[22893]: pam_unix(su:session): session closed for user root Jul 13 16:53:01 OnlyTux-Poland shutdown[23147]: shutting down for system reboot Jul 13 16:53:01 OnlyTux-Poland init: Switching to runlevel: 6 Jul 13 16:53:02 OnlyTux-Poland kernel: [13736.540309] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 16:53:04 OnlyTux-Poland kernel: [13738.485960] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 16:53:04 OnlyTux-Poland /usr/sbin/gpm[3240]: *** info [mice.c(1988)]: Jul 13 16:53:04 OnlyTux-Poland /usr/sbin/gpm[3240]: imps2: Auto-detected intellimouse PS/2 Jul 13 16:53:13 OnlyTux-Poland dhcpcd[4035]: eth0: received SIGTERM, stopping Jul 13 16:53:14 OnlyTux-Poland kernel: [13748.335229] b44: eth0: powering down PHY Jul 13 16:53:18 OnlyTux-Poland kernel: [13752.520792] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 16:53:22 OnlyTux-Poland acpid: exiting Jul 13 16:53:23 OnlyTux-Poland syslog-ng[3001]: Termination requested via signal, terminating; Jul 13 16:53:23 OnlyTux-Poland syslog-ng[3001]: syslog-ng shutting down; version='3.1.1' Jul 13 16:54:04 OnlyTux-Poland syslog-ng[2945]: syslog-ng starting up; version='3.1.1' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #2 Tue Jul 13 16:10:22 CEST 2010 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1556a2c, node_mem_map c1659300 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016525f4] TEXT DATA BSS Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #3 [0001653000 - 00016590d5] BRK Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #6 [0001659100 - 0001d59100] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #7 [0001652600 - 0001652604] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #8 [0001652680 - 0001652700] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #9 [0001652700 - 0001652754] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d59100 - 0001d5b100] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #11 [0001652780 - 00016527a5] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #12 [0001652800 - 0001652988] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #13 [0001652a00 - 0001652a40] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #14 [0001652a80 - 0001652ac0] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #15 [0001652b00 - 0001652b40] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #16 [0001652b80 - 0001652bc0] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #17 [0001652c00 - 0001652c40] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #18 [0001652c80 - 0001652cc0] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #19 [0001652d00 - 0001652d40] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #20 [0001652d80 - 0001652dc0] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #21 [0001652e00 - 0001652e40] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #22 [0001652e80 - 0001652ec0] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #23 [0001652f00 - 0001652f40] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #24 [0001652f80 - 0001652fc0] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5b100 - 0001d5b140] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5b180 - 0001d5b190] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5b200 - 0001d5b20f] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5b280 - 0001d5b28f] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5b300 - 0001d5f300] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d5f300 - 0001ddf300] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] #31 [0001ddf300 - 0001e1f300] BOOTMEM Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Memory: 902448k/917384k available (3493k kernel code, 14484k reserved, 2021k data, 328k init, 0k highmem) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1563000 - 0xc15b5000 ( 328 kB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369410 - 0xc1562b24 (2021 kB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369410 (3493 kB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.721 MHz processor. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.44 BogoMIPS (lpj=1728721) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.002291] Security Framework initialized Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.002430] SELinux: Initializing. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.002568] SELinux: Starting in permissive mode Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.002574] Mount-cache hash table entries: 512 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.002811] Initializing cgroup subsys ns Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.003005] Initializing cgroup subsys cpuacct Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.003143] Initializing cgroup subsys freezer Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.003280] Initializing cgroup subsys net_cls Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.003438] mce: CPU supports 6 MCE banks Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.003579] using mwait in idle threads. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.003718] Performance Events: Core events, core PMU driver. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004005] ... version: 1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004139] ... bit width: 40 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004273] ... generic registers: 2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004409] ... value mask: 000000ffffffffff Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004547] ... max period: 000000007fffffff Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004684] ... fixed-purpose events: 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004820] ... event mask: 0000000000000003 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.004957] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.005173] Checking 'hlt' instruction... OK. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.009596] ACPI: Core revision 20100121 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.021908] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.024170] khelper used greatest stack depth: 7296 bytes left Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.024557] Time: 16:53:45 Date: 07/13/10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.024725] NET: Registered protocol family 16 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.025265] ACPI: bus type pci registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.025523] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.025764] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.025905] PCI: Using MMCONFIG for extended config space Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.026016] PCI: Using configuration type 1 for base access Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.026539] khelper used greatest stack depth: 7260 bytes left Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.032225] bio: create slab at 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.033585] ACPI: EC: Look up EC in DSDT Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.037283] ACPI: BIOS _OSI(Linux) query ignored Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.038354] ACPI: Interpreter enabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.038500] ACPI: (supports S0 S3 S4 S5) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.038783] ACPI: Using PIC for interrupt routing Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.090607] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.091344] ACPI: No dock devices found. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.092007] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.092846] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094361] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094365] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094369] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094372] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094376] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094379] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094383] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094450] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094456] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094461] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094467] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094505] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094611] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094673] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094678] pci 0000:00:1b.0: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094775] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094780] pci 0000:00:1c.0: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094879] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094884] pci 0000:00:1c.1: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094983] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.094988] pci 0000:00:1c.2: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095099] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095105] pci 0000:00:1c.3: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095168] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095232] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095295] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095359] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095419] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095482] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095489] pci 0000:00:1d.7: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095651] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.095890] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096243] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096546] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096555] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096563] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096571] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096580] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096616] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096621] pci 0000:00:1f.2: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096682] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096776] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096917] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096923] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.096931] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097053] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097193] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097199] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097208] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097270] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097409] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097415] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097424] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097532] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097624] pci 0000:05:00.0: PME# supported from D3hot Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097630] pci 0000:05:00.0: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097658] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097797] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097803] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097812] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097874] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097931] pci 0000:06:01.0: supports D1 D2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097934] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097939] pci 0000:06:01.0: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.097984] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098023] pci 0000:06:04.0: supports D1 D2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098026] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098032] pci 0000:06:04.0: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098075] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098146] pci 0000:06:04.1: supports D1 D2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098148] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098154] pci 0000:06:04.1: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098197] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098268] pci 0000:06:04.2: supports D1 D2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098270] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098276] pci 0000:06:04.2: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098318] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098390] pci 0000:06:04.3: supports D1 D2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098392] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098398] pci 0000:06:04.3: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098441] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098512] pci 0000:06:04.4: supports D1 D2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098515] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098521] pci 0000:06:04.4: PME# disabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098584] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098729] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098734] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098743] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098746] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098753] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.098807] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099035] pci_bus 0000:00: on NUMA node 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.099874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.105404] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.105953] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.106521] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.107112] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.107687] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.108402] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.108973] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.109512] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.110142] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.110386] vgaarb: loaded Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.110707] SCSI subsystem initialized Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.110872] libata version 3.00 loaded. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.111080] usbcore: registered new interface driver usbfs Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.111262] usbcore: registered new interface driver hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.111446] usbcore: registered new device driver usb Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.111835] PCI: Using ACPI for IRQ routing Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.111973] PCI: pci_cache_line_size set to 64 bytes Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112107] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112111] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112355] cfg80211: Calling CRDA to update world regulatory domain Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112542] NetLabel: Initializing Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112675] NetLabel: domain hash size = 128 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112811] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.112959] NetLabel: unlabeled traffic allowed by default Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.113104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.113369] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.115016] Switching to clocksource tsc Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.117233] pnp: PnP ACPI init Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.117375] ACPI: bus type pnp registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.141288] pnp: PnP ACPI: found 10 devices Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.141425] ACPI: ACPI bus type pnp unregistered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.141572] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.141712] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.141853] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.141994] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.142135] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.142304] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.142450] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.142593] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.142732] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.142871] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.143010] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.143149] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.143300] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.178145] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.178399] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.178539] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.178774] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.178915] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.179149] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.179301] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.179538] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.179774] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.179913] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180054] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180194] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180344] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180485] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180624] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180768] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.180912] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.181152] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.181303] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.181447] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.181590] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.181831] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.181971] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.182114] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.182268] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.182508] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.182644] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.182786] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.182929] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.183171] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.183418] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.183559] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.183703] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.183943] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.184084] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.184234] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.184379] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.184619] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.184757] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.184900] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.185044] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.185293] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.185437] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.185577] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.185721] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.185865] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.186115] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.186446] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.186585] PCI: setting IRQ 11 as level-triggered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.186593] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.186834] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187006] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187144] PCI: setting IRQ 6 as level-triggered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187151] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187402] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187574] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187712] PCI: setting IRQ 10 as level-triggered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187719] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.187956] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188126] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188278] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188516] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188523] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188664] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188678] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188917] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188921] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188924] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188927] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188930] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188933] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188936] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188940] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188943] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188946] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188949] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188952] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188955] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188958] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188962] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188965] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188968] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188971] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188974] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188977] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188980] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188983] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.188986] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.189011] NET: Registered protocol family 2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.189198] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.189581] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.190588] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.190937] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.191077] TCP reno registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.191228] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.191372] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.191603] NET: Registered protocol family 1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.191848] RPC: Registered udp transport module. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.191986] RPC: Registered tcp transport module. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192121] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192300] pci 0000:00:02.0: Boot video device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192322] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192325] pci 0000:00:1d.0: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192344] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192347] pci 0000:00:1d.1: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192367] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192370] pci 0000:00:1d.2: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192389] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192392] pci 0000:00:1d.3: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192455] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.192602] Simple Boot Flag at 0x36 set to 0x1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.193387] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.193569] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.193807] Scanning for low memory corruption every 60 seconds Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.194356] audit: initializing netlink socket (disabled) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.194507] type=2000 audit(1279040025.194:1): initialized Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.223163] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.226478] VFS: Disk quotas dquot_6.5.2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.226688] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.227741] msgmni has been set to 1762 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.227972] SELinux: Registering netfilter hooks Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.228138] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.229064] alg: No test for stdrng (krng) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.229396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.229632] io scheduler noop registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.229766] io scheduler deadline registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.229913] io scheduler cfq registered (default) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.230175] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.230380] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.230556] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.230736] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.230987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.234841] Non-volatile memory driver v1.3 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.235010] intel_rng: FWH not detected Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.235144] Linux agpgart interface v0.103 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.235341] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.235797] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.238698] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.243400] ACPI: AC Adapter [ACAD] (on-line) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.243704] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.243987] ACPI: Lid Switch [LID] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.244197] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.244453] ACPI: Sleep Button [SLPB] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.247340] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.247578] ACPI: Power Button [PWRB] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.247810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.248046] ACPI: Power Button [PWRF] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.248625] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.248863] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.249524] Marking TSC unstable due to TSC halts in idle Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.249762] Switching to clocksource hpet Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.277030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.277419] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.277563] ACPI: Thermal Zone [TZ00] (63 C) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.287074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.287223] ACPI: Thermal Zone [TZ01] (63 C) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.287470] [drm] Initialized drm 1.1.0 20060810 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.287627] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.287864] i915 0000:00:02.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.290656] [drm] set up 7M of stolen space Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.394310] [drm] initialized overlay support Jul 13 16:54:04 OnlyTux-Poland kernel: [ 0.664074] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.091833] Console: switching to colour frame buffer device 160x50 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.097233] fb0: inteldrmfb frame buffer device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.097276] registered panic notifier Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.097318] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.097447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.100110] brd: module loaded Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.101192] loop: module loaded Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.101577] ata_piix 0000:00:1f.2: version 2.13 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.101599] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.101681] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.252041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.252110] scsi0 : ata_piix Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.252274] scsi1 : ata_piix Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.253552] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.253620] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.254217] console [netcon0] enabled Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.254256] netconsole: network logging started Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.254360] usbcore: registered new interface driver libusual Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.254514] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256200] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256332] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256383] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256469] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256520] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256569] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.256807] mice: PS/2 mouse device common for all mice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.257401] rtc_cmos 00:07: RTC can wake from S4 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.257514] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.258751] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.260052] i2c /dev entries driver Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.261725] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.263335] cpuidle: using governor ladder Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.264850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.266801] cpuidle: using governor menu Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.269567] usbcore: registered new interface driver hiddev Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.271347] usbcore: registered new interface driver usbhid Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.272895] usbhid: USB HID core driver Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.274761] GACT probability on Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.276355] Mirror/redirect action on Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.277982] Simple TC action Loaded Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.279850] netem: version 1.2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.281512] u32 classifier Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.283211] Performance counters on Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.284912] input device check on Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.286652] Actions configured Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.288388] Netfilter messages via NETLINK v0.30. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.290200] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.292209] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.294053] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.295893] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.297884] ctnetlink v0.93: registering with nfnetlink. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.299720] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.301579] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.303467] xt_time: kernel timezone is -0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.305891] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.307742] ClusterIP Version 0.8 loaded successfully Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.309613] arp_tables: (C) 2002 David S. Miller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.311498] TCP cubic registered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.313346] Initializing XFRM netlink socket Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.315187] NET: Registered protocol family 17 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.317230] PM: Resume from disk failed. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.317247] registered taskstats version 1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.319434] Magic number: 2:20:894 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.407553] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.409373] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.414515] ata1.00: configured for UDMA/100 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.416419] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.418590] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.420510] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.422523] sd 0:0:0:0: [sda] Write Protect is off Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.424459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.424505] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.426624] sda: sda1 sda2 sda3 sda4 < Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.446427] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.467924] sda5 sda6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.491333] ata2.00: configured for UDMA/33 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.495339] sda7 > Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.497870] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.502057] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.514650] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.516573] Uniform CD-ROM driver Revision: 3.20 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.518622] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.518728] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.871461] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.903908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.945150] kjournald starting. Commit interval 5 seconds Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.947237] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.949349] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.951464] Freeing unused kernel memory: 328k freed Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.953765] Write protecting the kernel text: 3496k Jul 13 16:54:04 OnlyTux-Poland kernel: [ 1.955929] Write protecting the kernel read-only data: 1696k Jul 13 16:54:04 OnlyTux-Poland kernel: [ 2.424054] async/0 used greatest stack depth: 6544 bytes left Jul 13 16:54:04 OnlyTux-Poland kernel: [ 3.256568] stty used greatest stack depth: 6364 bytes left Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.604816] udev: starting version 149 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810137] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810397] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810400] PCI: setting IRQ 5 as level-triggered Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810407] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810430] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810434] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810452] drivers/usb/core/inode.c: creating file 'devices' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810460] drivers/usb/core/inode.c: creating file '001' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810464] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810476] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810482] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810504] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810517] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.810523] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.814436] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.814439] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.869042] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.869050] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.872926] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881044] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881105] usb usb1: default language 0x0409 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881113] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881122] usb usb1: Product: EHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881124] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881127] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881253] usb usb1: usb_probe_device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881257] usb usb1: configuration #1 chosen from 1 choice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881266] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881331] hub 1-0:1.0: usb_probe_interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881333] hub 1-0:1.0: usb_probe_interface - got id Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881336] hub 1-0:1.0: USB hub found Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881342] hub 1-0:1.0: 8 ports detected Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881345] hub 1-0:1.0: standalone hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881347] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881349] hub 1-0:1.0: individual port over-current protection Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881352] hub 1-0:1.0: power on to power good time: 20ms Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881356] hub 1-0:1.0: local power source is good Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881359] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.881403] drivers/usb/core/inode.c: creating file '001' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934204] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934281] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934293] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934297] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934306] drivers/usb/core/inode.c: creating file '002' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934313] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934322] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934328] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934331] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934347] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934357] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934401] usb usb2: default language 0x0409 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934409] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934415] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934418] usb usb2: Product: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934420] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934423] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934851] usb usb2: usb_probe_device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934856] usb usb2: configuration #1 chosen from 1 choice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934866] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934952] hub 2-0:1.0: usb_probe_interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934955] hub 2-0:1.0: usb_probe_interface - got id Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934958] hub 2-0:1.0: USB hub found Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934964] hub 2-0:1.0: 2 ports detected Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934966] hub 2-0:1.0: standalone hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934968] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934971] hub 2-0:1.0: individual port over-current protection Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934974] hub 2-0:1.0: power on to power good time: 2ms Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934978] hub 2-0:1.0: local power source is good Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934981] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.934999] drivers/usb/core/inode.c: creating file '001' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935081] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935103] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935112] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935116] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935122] drivers/usb/core/inode.c: creating file '003' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935128] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935136] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935142] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935144] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935161] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935170] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935206] usb usb3: default language 0x0409 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935214] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935216] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935219] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935222] usb usb3: Product: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935225] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935228] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935338] usb usb3: usb_probe_device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935341] usb usb3: configuration #1 chosen from 1 choice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935348] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935411] hub 3-0:1.0: usb_probe_interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935413] hub 3-0:1.0: usb_probe_interface - got id Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935416] hub 3-0:1.0: USB hub found Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935421] hub 3-0:1.0: 2 ports detected Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935423] hub 3-0:1.0: standalone hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935425] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935427] hub 3-0:1.0: individual port over-current protection Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935430] hub 3-0:1.0: power on to power good time: 2ms Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935434] hub 3-0:1.0: local power source is good Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935436] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935452] drivers/usb/core/inode.c: creating file '001' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935483] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935500] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935508] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935512] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935517] drivers/usb/core/inode.c: creating file '004' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935522] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935530] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935535] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935538] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935554] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935562] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935595] usb usb4: default language 0x0409 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935602] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935608] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935611] usb usb4: Product: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935613] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.935616] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936132] usb usb4: usb_probe_device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936136] usb usb4: configuration #1 chosen from 1 choice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936145] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936234] hub 4-0:1.0: usb_probe_interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936237] hub 4-0:1.0: usb_probe_interface - got id Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936239] hub 4-0:1.0: USB hub found Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936244] hub 4-0:1.0: 2 ports detected Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936246] hub 4-0:1.0: standalone hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936248] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936251] hub 4-0:1.0: individual port over-current protection Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936253] hub 4-0:1.0: power on to power good time: 2ms Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936257] hub 4-0:1.0: local power source is good Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936260] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936278] drivers/usb/core/inode.c: creating file '001' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936313] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936333] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936342] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936346] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936355] drivers/usb/core/inode.c: creating file '005' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936369] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936374] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936377] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936394] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936402] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936437] usb usb5: default language 0x0409 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936444] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936447] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936450] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936453] usb usb5: Product: UHCI Host Controller Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936455] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.936458] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937049] usb usb5: usb_probe_device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937053] usb usb5: configuration #1 chosen from 1 choice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937062] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937165] hub 5-0:1.0: usb_probe_interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937168] hub 5-0:1.0: usb_probe_interface - got id Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937171] hub 5-0:1.0: USB hub found Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937176] hub 5-0:1.0: 2 ports detected Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937179] hub 5-0:1.0: standalone hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937181] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937183] hub 5-0:1.0: individual port over-current protection Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937186] hub 5-0:1.0: power on to power good time: 2ms Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937190] hub 5-0:1.0: local power source is good Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937193] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937209] drivers/usb/core/inode.c: creating file '001' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.937243] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.981067] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 16:54:04 OnlyTux-Poland kernel: [ 4.981073] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.002519] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.002527] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.002530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.007588] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.007601] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.007644] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482445] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482884] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482888] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482892] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482895] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482904] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.482914] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.533842] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.533871] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.565642] ath: EEPROM regdomain: 0x65 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.565645] ath: EEPROM indicates we should expect a direct regpair map Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.565649] ath: Country alpha2 being used: 00 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.565651] ath: Regpair used: 0x65 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.568051] phy0: Selected rate control algorithm 'minstrel' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.568420] Registered led device: ath5k-phy0::rx Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.568436] Registered led device: ath5k-phy0::tx Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.568439] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.582040] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.584754] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.584765] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.584773] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.585316] sdhci: Secure Digital Host Controller Interface driver Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.585319] sdhci: Copyright(c) Pierre Ossman Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.600600] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.600606] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.600618] b44 0000:06:01.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.608140] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.608148] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.608156] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641141] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641188] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641204] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641216] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641279] Registered led device: mmc0:: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641317] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641328] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641343] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641350] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641386] Registered led device: mmc1:: Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.641414] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.642138] b44: b44.c:v2.0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.650709] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.690880] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.792057] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.914459] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.914465] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.914501] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.937441] usb 5-1: skipped 1 descriptor after interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.942453] usb 5-1: default language 0x0409 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.954045] usb usb2: suspend_rh (auto-stop) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.954075] usb usb3: suspend_rh (auto-stop) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.954101] usb usb4: suspend_rh (auto-stop) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960460] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960464] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960467] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960471] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960473] usb 5-1: Manufacturer: Microsoft Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960571] usb 5-1: usb_probe_device Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.960576] usb 5-1: configuration #1 chosen from 1 choice Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.976968] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.977060] usbhid 5-1:1.0: usb_probe_interface Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.977063] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.994805] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.994895] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 16:54:04 OnlyTux-Poland kernel: [ 5.994925] drivers/usb/core/inode.c: creating file '002' Jul 13 16:54:04 OnlyTux-Poland kernel: [ 7.380679] EXT3-fs (sda6): using internal journal Jul 13 16:54:04 OnlyTux-Poland kernel: [ 8.651164] kjournald starting. Commit interval 5 seconds Jul 13 16:54:04 OnlyTux-Poland kernel: [ 8.651442] EXT3-fs (sda7): using internal journal Jul 13 16:54:04 OnlyTux-Poland kernel: [ 8.651446] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 16:54:04 OnlyTux-Poland kernel: [ 8.680489] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 8.728549] NTFS volume version 3.1. Jul 13 16:54:04 OnlyTux-Poland kernel: [ 8.838824] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 16:54:04 OnlyTux-Poland kernel: [ 10.876930] find used greatest stack depth: 6268 bytes left Jul 13 16:54:05 OnlyTux-Poland acpid: starting up with proc fs Jul 13 16:54:05 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 16:54:05 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 16:54:05 OnlyTux-Poland acpid: 1 rule loaded Jul 13 16:54:05 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 16:54:05 OnlyTux-Poland rc-scripts: cpufreqd requires the kernel to be configured with CONFIG_CPU_FREQ Jul 13 16:54:05 OnlyTux-Poland rc-scripts: Make sure that the appropiate kernel drivers for your CPU are Jul 13 16:54:05 OnlyTux-Poland rc-scripts: built-in or loaded. Jul 13 16:54:06 OnlyTux-Poland /usr/sbin/gpm[3178]: *** info [daemon/startup.c(136)]: Jul 13 16:54:06 OnlyTux-Poland /usr/sbin/gpm[3178]: Started gpm successfully. Entered daemon mode. Jul 13 16:54:06 OnlyTux-Poland kernel: [ 19.606929] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 16:54:06 OnlyTux-Poland /usr/sbin/gpm[3178]: *** info [mice.c(1988)]: Jul 13 16:54:06 OnlyTux-Poland /usr/sbin/gpm[3178]: imps2: Auto-detected intellimouse PS/2 Jul 13 16:54:08 OnlyTux-Poland acpid: client connected from 3445[102:1002] Jul 13 16:54:08 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 16:54:09 OnlyTux-Poland kernel: [ 22.603629] iptables-restor used greatest stack depth: 6256 bytes left Jul 13 16:54:09 OnlyTux-Poland dhcpcd[3965]: eth0: dhcpcd 4.0.15 starting Jul 13 16:54:09 OnlyTux-Poland dhcpcd[3965]: eth0: broadcasting for a lease Jul 13 16:54:13 OnlyTux-Poland kernel: [ 26.704234] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 16:54:13 OnlyTux-Poland kernel: [ 26.704237] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 16:54:13 OnlyTux-Poland dhcpcd[3965]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 16:54:13 OnlyTux-Poland dhcpcd[3965]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 16:54:13 OnlyTux-Poland dhcpcd[3965]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 16:54:18 OnlyTux-Poland dhcpcd[3965]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 16:54:18 OnlyTux-Poland cron[4177]: (CRON) STARTUP (V5.0) Jul 13 16:54:27 OnlyTux-Poland login[4245]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 13 16:54:27 OnlyTux-Poland login[4252]: ROOT LOGIN on '/dev/tty1' Jul 13 16:54:29 OnlyTux-Poland kernel: [ 42.882807] kjournald starting. Commit interval 5 seconds Jul 13 16:54:29 OnlyTux-Poland kernel: [ 42.893958] EXT3-fs (sda2): using internal journal Jul 13 16:54:29 OnlyTux-Poland kernel: [ 42.893963] EXT3-fs (sda2): mounted filesystem with writeback data mode Jul 13 16:58:24 OnlyTux-Poland kernel: [ 277.757404] make used greatest stack depth: 5912 bytes left Jul 13 16:59:01 OnlyTux-Poland cron[7613]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 16:59:17 OnlyTux-Poland shutdown[8075]: shutting down for system reboot Jul 13 16:59:21 OnlyTux-Poland init: Switching to runlevel: 6 Jul 13 16:59:24 OnlyTux-Poland dhcpcd[3972]: eth0: received SIGTERM, stopping Jul 13 16:59:24 OnlyTux-Poland kernel: [ 338.068222] b44 ssb0:0: eth0: powering down PHY Jul 13 16:59:25 OnlyTux-Poland kernel: [ 339.428800] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 16:59:26 OnlyTux-Poland acpid: exiting Jul 13 16:59:27 OnlyTux-Poland syslog-ng[2945]: Termination requested via signal, terminating; Jul 13 16:59:27 OnlyTux-Poland syslog-ng[2945]: syslog-ng shutting down; version='3.1.1' Jul 13 17:00:01 OnlyTux-Poland syslog-ng[2957]: syslog-ng starting up; version='3.1.1' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #3 Tue Jul 13 16:58:48 CEST 2010 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558a8c, node_mem_map c165b300 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369d00 - 0xc1564b24 (2027 kB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369d00 (3495 kB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.686 MHz processor. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.37 BogoMIPS (lpj=1728686) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002146] Security Framework initialized Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002283] SELinux: Initializing. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002420] SELinux: Starting in permissive mode Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002426] Mount-cache hash table entries: 512 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002664] Initializing cgroup subsys ns Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002800] Initializing cgroup subsys cpuacct Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.002936] Initializing cgroup subsys freezer Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.003004] Initializing cgroup subsys net_cls Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.003159] mce: CPU supports 6 MCE banks Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.003299] using mwait in idle threads. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.003438] Performance Events: Core events, core PMU driver. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.003641] ... version: 1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.003775] ... bit width: 40 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004002] ... generic registers: 2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004137] ... value mask: 000000ffffffffff Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004274] ... max period: 000000007fffffff Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004412] ... fixed-purpose events: 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004547] ... event mask: 0000000000000003 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004684] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.004886] Checking 'hlt' instruction... OK. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.008595] ACPI: Core revision 20100121 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.020899] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.022347] khelper used greatest stack depth: 7296 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.022732] Time: 16:59:43 Date: 07/13/10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.022898] NET: Registered protocol family 16 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.023392] ACPI: bus type pci registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.023649] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.024013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.024153] PCI: Using MMCONFIG for extended config space Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.024289] PCI: Using configuration type 1 for base access Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.024715] khelper used greatest stack depth: 7260 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.030483] bio: create slab at 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.031843] ACPI: EC: Look up EC in DSDT Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.035552] ACPI: BIOS _OSI(Linux) query ignored Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.036410] ACPI: Interpreter enabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.036556] ACPI: (supports S0 S3 S4 S5) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.037006] ACPI: Using PIC for interrupt routing Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.090600] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.091331] ACPI: No dock devices found. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.092006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.092847] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094330] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094334] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094338] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094341] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094345] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094348] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094352] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094417] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094422] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094428] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094433] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094472] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094578] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094640] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094646] pci 0000:00:1b.0: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094747] pci 0000:00:1c.0: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094846] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094851] pci 0000:00:1c.1: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094950] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.094955] pci 0000:00:1c.2: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095066] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095071] pci 0000:00:1c.3: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095135] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095199] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095262] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095325] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095386] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095449] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095455] pci 0000:00:1d.7: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095619] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.095855] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096240] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096541] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096550] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096558] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096566] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096575] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096611] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096616] pci 0000:00:1f.2: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096677] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096771] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096910] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096916] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096925] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.096987] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097016] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097022] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097031] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097093] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097232] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097238] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097247] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097354] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097446] pci 0000:05:00.0: PME# supported from D3hot Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097452] pci 0000:05:00.0: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097479] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097617] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097623] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097632] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097693] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097750] pci 0000:06:01.0: supports D1 D2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097753] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097758] pci 0000:06:01.0: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097803] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097832] pci 0000:06:04.0: supports D1 D2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097834] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.097840] pci 0000:06:04.0: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098027] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098097] pci 0000:06:04.1: supports D1 D2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098100] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098106] pci 0000:06:04.1: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098149] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098219] pci 0000:06:04.2: supports D1 D2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098222] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098228] pci 0000:06:04.2: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098270] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098341] pci 0000:06:04.3: supports D1 D2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098344] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098350] pci 0000:06:04.3: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098393] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098464] pci 0000:06:04.4: supports D1 D2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098466] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098472] pci 0000:06:04.4: PME# disabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098536] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098680] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098686] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098694] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098698] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098704] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.098757] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099035] pci_bus 0000:00: on NUMA node 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.099873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.105322] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.105868] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.106422] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.107025] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.107595] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.108241] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.108811] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.109414] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.110046] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.110288] vgaarb: loaded Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.110605] SCSI subsystem initialized Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.110769] libata version 3.00 loaded. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.110953] usbcore: registered new interface driver usbfs Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.111056] usbcore: registered new interface driver hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.111241] usbcore: registered new device driver usb Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.111624] PCI: Using ACPI for IRQ routing Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.111760] PCI: pci_cache_line_size set to 64 bytes Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.111862] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.111866] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.112246] cfg80211: Calling CRDA to update world regulatory domain Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.112434] NetLabel: Initializing Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.112566] NetLabel: domain hash size = 128 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.112699] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.112845] NetLabel: unlabeled traffic allowed by default Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.113090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.113355] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.115016] Switching to clocksource tsc Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.117196] pnp: PnP ACPI init Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.117362] ACPI: bus type pnp registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.141400] pnp: PnP ACPI: found 10 devices Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.141535] ACPI: ACPI bus type pnp unregistered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.141681] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.141821] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.141962] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142101] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142241] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142394] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142538] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142681] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142819] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.142958] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.143096] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.143235] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.143385] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.178228] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.178478] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.178619] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.178852] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.178993] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.179225] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.179376] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.179609] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.179843] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.179982] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180122] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180260] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180409] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180548] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180686] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180828] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.180968] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.181202] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.181349] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.181491] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.181634] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.181872] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182010] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182152] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182295] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182544] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182682] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182824] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.182966] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.183207] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.183455] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.183595] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.183740] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.183977] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.184116] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.184256] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.184410] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.184649] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.184786] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.184927] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.185070] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.185305] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.185459] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.185597] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.185740] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.185882] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.186128] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.186456] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.186594] PCI: setting IRQ 11 as level-triggered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.186601] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.186840] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187011] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187148] PCI: setting IRQ 6 as level-triggered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187154] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187403] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187574] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187710] PCI: setting IRQ 10 as level-triggered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187717] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.187954] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188121] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188260] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188508] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188514] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188656] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188670] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188907] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188910] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188913] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188916] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188920] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188923] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188926] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188929] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188932] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188935] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188938] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188941] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188944] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188948] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188951] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188954] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188957] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188960] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188963] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188966] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188969] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188972] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.188975] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.189003] NET: Registered protocol family 2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.189189] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.189573] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.190585] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.190933] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.191072] TCP reno registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.191206] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.191368] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.191603] NET: Registered protocol family 1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.191844] RPC: Registered udp transport module. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.191980] RPC: Registered tcp transport module. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192115] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192265] pci 0000:00:02.0: Boot video device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192289] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192292] pci 0000:00:1d.0: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192312] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192314] pci 0000:00:1d.1: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192360] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192362] pci 0000:00:1d.2: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192382] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192385] pci 0000:00:1d.3: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192449] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.192596] Simple Boot Flag at 0x36 set to 0x1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.193377] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.193560] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.193797] Scanning for low memory corruption every 60 seconds Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.194306] audit: initializing netlink socket (disabled) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.194500] type=2000 audit(1279040383.194:1): initialized Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.223169] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.226510] VFS: Disk quotas dquot_6.5.2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.226723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.227800] msgmni has been set to 1762 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.228031] SELinux: Registering netfilter hooks Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.228204] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.229134] alg: No test for stdrng (krng) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.229470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.229704] io scheduler noop registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.229836] io scheduler deadline registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.229985] io scheduler cfq registered (default) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.230250] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.230459] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.230636] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.230816] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.231069] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.234917] Non-volatile memory driver v1.3 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.235084] intel_rng: FWH not detected Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.235217] Linux agpgart interface v0.103 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.235411] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.235851] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.238751] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.243478] ACPI: AC Adapter [ACAD] (on-line) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.243773] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.244054] ACPI: Lid Switch [LID] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.244265] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.244518] ACPI: Sleep Button [SLPB] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.247398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.247632] ACPI: Power Button [PWRB] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.247859] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.248093] ACPI: Power Button [PWRF] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.248656] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.248895] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.249565] Marking TSC unstable due to TSC halts in idle Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.249796] Switching to clocksource hpet Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.278030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.278220] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.278429] ACPI: Thermal Zone [TZ00] (59 C) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.288075] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.288221] ACPI: Thermal Zone [TZ01] (59 C) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.288462] [drm] Initialized drm 1.1.0 20060810 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.288617] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.288852] i915 0000:00:02.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.291632] [drm] set up 7M of stolen space Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.395304] [drm] initialized overlay support Jul 13 17:00:01 OnlyTux-Poland kernel: [ 0.665074] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.126838] Console: switching to colour frame buffer device 160x50 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.132236] fb0: inteldrmfb frame buffer device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.132279] registered panic notifier Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.132321] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.132446] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.135088] brd: module loaded Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.136178] loop: module loaded Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.136556] ata_piix 0000:00:1f.2: version 2.13 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.136579] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.136661] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.287041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.287110] scsi0 : ata_piix Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.287271] scsi1 : ata_piix Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.288541] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.288608] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.289217] console [netcon0] enabled Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.289255] netconsole: network logging started Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.289358] usbcore: registered new interface driver libusual Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.289511] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292167] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292298] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292350] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292437] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292488] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292537] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.292767] mice: PS/2 mouse device common for all mice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.293350] rtc_cmos 00:07: RTC can wake from S4 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.293459] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.294691] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.295951] i2c /dev entries driver Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.297615] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.299243] cpuidle: using governor ladder Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.300740] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.302688] cpuidle: using governor menu Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.304697] khelper used greatest stack depth: 6772 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.307123] usbcore: registered new interface driver hiddev Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.308820] usbcore: registered new interface driver usbhid Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.310430] usbhid: USB HID core driver Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.312302] GACT probability on Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.313936] Mirror/redirect action on Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.315606] Simple TC action Loaded Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.317526] netem: version 1.2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.319228] u32 classifier Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.320966] Performance counters on Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.322704] input device check on Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.324464] Actions configured Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.326240] Netfilter messages via NETLINK v0.30. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.328051] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.330047] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.331885] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.333712] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.335691] ctnetlink v0.93: registering with nfnetlink. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.337526] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.339405] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.341289] xt_time: kernel timezone is -0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.343704] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.345577] ClusterIP Version 0.8 loaded successfully Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.347470] arp_tables: (C) 2002 David S. Miller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.349330] TCP cubic registered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.351179] Initializing XFRM netlink socket Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.353029] NET: Registered protocol family 17 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.355104] PM: Resume from disk failed. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.355121] registered taskstats version 1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.357334] Magic number: 2:123:995 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.442553] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.444361] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.449513] ata1.00: configured for UDMA/100 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.451434] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.453648] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.455604] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.457654] sd 0:0:0:0: [sda] Write Protect is off Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.459649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.459695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.461836] sda: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.465421] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.481792] sda1 sda2 sda3 sda4 < sda5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.510334] ata2.00: configured for UDMA/33 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.514309] sda6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.517954] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.531388] sda7 > Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.533303] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.535241] Uniform CD-ROM driver Revision: 3.20 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.537570] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.537745] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.540072] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.907358] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.939822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.971423] kjournald starting. Commit interval 5 seconds Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.973513] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.975648] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.977796] Freeing unused kernel memory: 328k freed Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.980149] Write protecting the kernel text: 3496k Jul 13 17:00:01 OnlyTux-Poland kernel: [ 1.982340] Write protecting the kernel read-only data: 1700k Jul 13 17:00:01 OnlyTux-Poland kernel: [ 2.459055] async/0 used greatest stack depth: 6444 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 3.282847] stty used greatest stack depth: 6424 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 3.372068] grep used greatest stack depth: 6364 bytes left Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.653144] udev: starting version 149 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.835766] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.835774] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.835778] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.964514] sdhci: Secure Digital Host Controller Interface driver Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.964518] sdhci: Copyright(c) Pierre Ossman Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982291] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982547] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982550] PCI: setting IRQ 5 as level-triggered Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982557] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982578] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982583] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982604] drivers/usb/core/inode.c: creating file 'devices' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982608] drivers/usb/core/inode.c: creating file '001' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982613] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982623] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982628] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982646] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982659] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.982665] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.986566] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.986568] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.986578] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.986583] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.990468] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997304] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997363] usb usb1: default language 0x0409 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997371] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997380] usb usb1: Product: EHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997383] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997386] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997513] usb usb1: usb_probe_device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997517] usb usb1: configuration #1 chosen from 1 choice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997526] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997747] hub 1-0:1.0: usb_probe_interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997750] hub 1-0:1.0: usb_probe_interface - got id Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997753] hub 1-0:1.0: USB hub found Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997760] hub 1-0:1.0: 8 ports detected Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997762] hub 1-0:1.0: standalone hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997764] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997766] hub 1-0:1.0: individual port over-current protection Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997769] hub 1-0:1.0: power on to power good time: 20ms Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997774] hub 1-0:1.0: local power source is good Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997777] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 4.997819] drivers/usb/core/inode.c: creating file '001' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016086] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016163] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016175] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016179] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016188] drivers/usb/core/inode.c: creating file '002' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016196] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016205] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016211] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016214] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016231] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016240] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016286] usb usb2: default language 0x0409 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016293] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016299] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016302] usb usb2: Product: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016305] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016307] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016724] usb usb2: usb_probe_device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016728] usb usb2: configuration #1 chosen from 1 choice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016737] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016822] hub 2-0:1.0: usb_probe_interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016825] hub 2-0:1.0: usb_probe_interface - got id Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016828] hub 2-0:1.0: USB hub found Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016834] hub 2-0:1.0: 2 ports detected Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016836] hub 2-0:1.0: standalone hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016838] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016840] hub 2-0:1.0: individual port over-current protection Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016843] hub 2-0:1.0: power on to power good time: 2ms Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016848] hub 2-0:1.0: local power source is good Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016851] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016870] drivers/usb/core/inode.c: creating file '001' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016912] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016933] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016943] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016947] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016954] drivers/usb/core/inode.c: creating file '003' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016967] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016972] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016975] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.016992] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017001] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017078] usb usb3: default language 0x0409 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017085] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017088] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017091] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017094] usb usb3: Product: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017097] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017099] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017205] usb usb3: usb_probe_device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017208] usb usb3: configuration #1 chosen from 1 choice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017214] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017276] hub 3-0:1.0: usb_probe_interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017278] hub 3-0:1.0: usb_probe_interface - got id Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017281] hub 3-0:1.0: USB hub found Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017286] hub 3-0:1.0: 2 ports detected Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017288] hub 3-0:1.0: standalone hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017290] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017292] hub 3-0:1.0: individual port over-current protection Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017295] hub 3-0:1.0: power on to power good time: 2ms Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017298] hub 3-0:1.0: local power source is good Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017301] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017317] drivers/usb/core/inode.c: creating file '001' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017349] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017369] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017376] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017380] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017386] drivers/usb/core/inode.c: creating file '004' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017390] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017399] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017404] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017407] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017423] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017431] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017464] usb usb4: default language 0x0409 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017471] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017473] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017476] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017479] usb usb4: Product: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017482] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017484] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017814] usb usb4: usb_probe_device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017817] usb usb4: configuration #1 chosen from 1 choice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017825] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017906] hub 4-0:1.0: usb_probe_interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017909] hub 4-0:1.0: usb_probe_interface - got id Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017911] hub 4-0:1.0: USB hub found Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017917] hub 4-0:1.0: 2 ports detected Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017919] hub 4-0:1.0: standalone hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017921] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017923] hub 4-0:1.0: individual port over-current protection Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017926] hub 4-0:1.0: power on to power good time: 2ms Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017930] hub 4-0:1.0: local power source is good Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017932] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017949] drivers/usb/core/inode.c: creating file '001' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.017983] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018031] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018040] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018044] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018050] drivers/usb/core/inode.c: creating file '005' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018055] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018064] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018070] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018072] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018089] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018096] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018133] usb usb5: default language 0x0409 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018140] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018142] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018145] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018148] usb usb5: Product: UHCI Host Controller Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018151] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018153] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018508] usb usb5: usb_probe_device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018511] usb usb5: configuration #1 chosen from 1 choice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018519] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018600] hub 5-0:1.0: usb_probe_interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018603] hub 5-0:1.0: usb_probe_interface - got id Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018605] hub 5-0:1.0: USB hub found Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018610] hub 5-0:1.0: 2 ports detected Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018612] hub 5-0:1.0: standalone hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018614] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018617] hub 5-0:1.0: individual port over-current protection Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018619] hub 5-0:1.0: power on to power good time: 2ms Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018623] hub 5-0:1.0: local power source is good Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018626] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018643] drivers/usb/core/inode.c: creating file '001' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.018675] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.050364] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.050370] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.050382] b44 0000:06:01.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.058316] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.058324] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.058332] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.077142] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.077335] b44: b44.c:v2.0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.085722] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.097069] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.097075] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.117247] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.117253] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.117256] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.120031] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.123923] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.123940] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.123952] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124093] Registered led device: mmc0:: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124159] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124178] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124192] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124200] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124270] Registered led device: mmc1:: Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.124333] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.211653] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.211666] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.211676] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.224070] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.224084] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.224128] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.689662] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.689691] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.689696] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.689705] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.689712] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.767557] ath: EEPROM regdomain: 0x65 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.767560] ath: EEPROM indicates we should expect a direct regpair map Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.767565] ath: Country alpha2 being used: 00 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.767567] ath: Regpair used: 0x65 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.769942] phy0: Selected rate control algorithm 'minstrel' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.770363] Registered led device: ath5k-phy0::rx Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.770379] Registered led device: ath5k-phy0::tx Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.770383] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.816040] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.928750] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.965111] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.965117] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 5.965148] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.074505] usb 5-1: skipped 1 descriptor after interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.079133] usb 5-1: default language 0x0409 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097145] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097148] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097151] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097155] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097157] usb 5-1: Manufacturer: Microsoft Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097248] usb 5-1: usb_probe_device Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.097252] usb 5-1: configuration #1 chosen from 1 choice Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.110142] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.110181] usbhid 5-1:1.0: usb_probe_interface Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.110184] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.124554] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.124736] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.124767] drivers/usb/core/inode.c: creating file '002' Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.124788] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.204057] usb usb2: suspend_rh (auto-stop) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.204086] usb usb3: suspend_rh (auto-stop) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 6.204111] usb usb4: suspend_rh (auto-stop) Jul 13 17:00:01 OnlyTux-Poland kernel: [ 7.417469] EXT3-fs (sda6): using internal journal Jul 13 17:00:01 OnlyTux-Poland kernel: [ 8.710768] kjournald starting. Commit interval 5 seconds Jul 13 17:00:01 OnlyTux-Poland kernel: [ 8.711037] EXT3-fs (sda7): using internal journal Jul 13 17:00:01 OnlyTux-Poland kernel: [ 8.711041] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 17:00:01 OnlyTux-Poland kernel: [ 8.740874] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 8.788150] NTFS volume version 3.1. Jul 13 17:00:01 OnlyTux-Poland kernel: [ 8.898436] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 17:00:01 OnlyTux-Poland kernel: [ 10.480927] find used greatest stack depth: 6268 bytes left Jul 13 17:00:02 OnlyTux-Poland acpid: starting up with proc fs Jul 13 17:00:02 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 17:00:02 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 17:00:02 OnlyTux-Poland acpid: 1 rule loaded Jul 13 17:00:02 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 17:00:02 OnlyTux-Poland rc-scripts: cpufreqd requires the kernel to be configured with CONFIG_CPU_FREQ Jul 13 17:00:02 OnlyTux-Poland rc-scripts: Make sure that the appropiate kernel drivers for your CPU are Jul 13 17:00:02 OnlyTux-Poland rc-scripts: built-in or loaded. Jul 13 17:00:02 OnlyTux-Poland /usr/sbin/gpm[3190]: *** info [daemon/startup.c(136)]: Jul 13 17:00:02 OnlyTux-Poland /usr/sbin/gpm[3190]: Started gpm successfully. Entered daemon mode. Jul 13 17:00:02 OnlyTux-Poland kernel: [ 19.091646] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:00:03 OnlyTux-Poland /usr/sbin/gpm[3190]: *** info [mice.c(1988)]: Jul 13 17:00:03 OnlyTux-Poland /usr/sbin/gpm[3190]: imps2: Auto-detected intellimouse PS/2 Jul 13 17:00:05 OnlyTux-Poland acpid: client connected from 3457[102:1002] Jul 13 17:00:05 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:00:06 OnlyTux-Poland dhcpcd[3977]: eth0: dhcpcd 4.0.15 starting Jul 13 17:00:06 OnlyTux-Poland dhcpcd[3977]: eth0: broadcasting for a lease Jul 13 17:00:09 OnlyTux-Poland kernel: [ 25.704232] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 17:00:09 OnlyTux-Poland kernel: [ 25.704236] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 17:00:10 OnlyTux-Poland dhcpcd[3977]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 17:00:10 OnlyTux-Poland dhcpcd[3977]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 17:00:10 OnlyTux-Poland dhcpcd[3977]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 17:00:14 OnlyTux-Poland dhcpcd[3977]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 17:00:15 OnlyTux-Poland cron[4189]: (CRON) STARTUP (V5.0) Jul 13 17:00:22 OnlyTux-Poland login[4257]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 13 17:00:22 OnlyTux-Poland login[4264]: ROOT LOGIN on '/dev/tty1' Jul 13 17:01:58 OnlyTux-Poland kernel: [ 134.339209] sensors-detect used greatest stack depth: 6240 bytes left Jul 13 17:06:35 OnlyTux-Poland kernel: [ 411.462614] ld used greatest stack depth: 6212 bytes left Jul 13 17:06:38 OnlyTux-Poland kernel: [ 415.150110] cc1 used greatest stack depth: 6196 bytes left Jul 13 17:07:00 OnlyTux-Poland kernel: [ 436.464213] kjournald starting. Commit interval 5 seconds Jul 13 17:07:00 OnlyTux-Poland kernel: [ 436.475306] EXT3-fs (sda2): using internal journal Jul 13 17:07:00 OnlyTux-Poland kernel: [ 436.475311] EXT3-fs (sda2): mounted filesystem with writeback data mode Jul 13 17:07:09 OnlyTux-Poland shutdown[8077]: shutting down for system reboot Jul 13 17:07:13 OnlyTux-Poland init: Switching to runlevel: 6 Jul 13 17:07:16 OnlyTux-Poland dhcpcd[3984]: eth0: received SIGTERM, stopping Jul 13 17:07:16 OnlyTux-Poland kernel: [ 452.405052] b44 ssb0:0: eth0: powering down PHY Jul 13 17:07:17 OnlyTux-Poland kernel: [ 453.762222] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:07:18 OnlyTux-Poland acpid: exiting Jul 13 17:07:19 OnlyTux-Poland syslog-ng[2957]: Termination requested via signal, terminating; Jul 13 17:07:19 OnlyTux-Poland syslog-ng[2957]: syslog-ng shutting down; version='3.1.1' Jul 13 17:07:53 OnlyTux-Poland syslog-ng[2943]: syslog-ng starting up; version='3.1.1' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 Tue Jul 13 17:06:36 CEST 2010 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558b90, node_mem_map c165c300 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016555f4] TEXT DATA BSS Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #3 [0001656000 - 000165c0d5] BRK Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #6 [000165c100 - 0001d5c100] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #7 [0001655600 - 0001655604] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #8 [0001655680 - 0001655700] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #9 [0001655700 - 0001655754] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5c100 - 0001d5e100] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #11 [0001655780 - 00016557a5] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #12 [0001655800 - 0001655988] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #13 [0001655a00 - 0001655a40] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #14 [0001655a80 - 0001655ac0] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #15 [0001655b00 - 0001655b40] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #16 [0001655b80 - 0001655bc0] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #17 [0001655c00 - 0001655c40] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #18 [0001655c80 - 0001655cc0] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #19 [0001655d00 - 0001655d40] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #20 [0001655d80 - 0001655dc0] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #21 [0001655e00 - 0001655e40] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #22 [0001655e80 - 0001655ec0] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #23 [0001655f00 - 0001655f40] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #24 [0001655f80 - 0001655fc0] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5e100 - 0001d5e140] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5e180 - 0001d5e190] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5e200 - 0001d5e20f] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5e280 - 0001d5e28f] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5e300 - 0001d62300] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d62300 - 0001de2300] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de2300 - 0001e22300] BOOTMEM Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Memory: 902436k/917384k available (3496k kernel code, 14496k reserved, 2026k data, 332k init, 0k highmem) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b8000 ( 332 kB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc136a1e8 - 0xc1564c24 (2026 kB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc136a1e8 (3496 kB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.844 MHz processor. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.68 BogoMIPS (lpj=1728844) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.001290] Security Framework initialized Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.001431] SELinux: Initializing. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.001570] SELinux: Starting in permissive mode Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.001576] Mount-cache hash table entries: 512 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.002107] Initializing cgroup subsys ns Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.002246] Initializing cgroup subsys cpuacct Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.002381] Initializing cgroup subsys freezer Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.002518] Initializing cgroup subsys net_cls Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.002674] mce: CPU supports 6 MCE banks Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.002816] using mwait in idle threads. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003009] Performance Events: Core events, core PMU driver. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003214] ... version: 1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003348] ... bit width: 40 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003484] ... generic registers: 2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003619] ... value mask: 000000ffffffffff Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003758] ... max period: 000000007fffffff Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.003894] ... fixed-purpose events: 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.004003] ... event mask: 0000000000000003 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.004139] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.004347] Checking 'hlt' instruction... OK. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.008597] ACPI: Core revision 20100121 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.020908] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.023165] khelper used greatest stack depth: 7296 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.023549] Time: 17:07:35 Date: 07/13/10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.023715] NET: Registered protocol family 16 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.024250] ACPI: bus type pci registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.024508] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.024748] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.024888] PCI: Using MMCONFIG for extended config space Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.025016] PCI: Using configuration type 1 for base access Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.025540] khelper used greatest stack depth: 7260 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.031179] bio: create slab at 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.032532] ACPI: EC: Look up EC in DSDT Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.036214] ACPI: BIOS _OSI(Linux) query ignored Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.037285] ACPI: Interpreter enabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.037430] ACPI: (supports S0 S3 S4 S5) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.037710] ACPI: Using PIC for interrupt routing Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.090614] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.091347] ACPI: No dock devices found. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.092006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.093012] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094371] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094375] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094378] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094382] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094385] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094388] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094392] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094459] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094465] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094470] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094476] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094514] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094620] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094688] pci 0000:00:1b.0: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094789] pci 0000:00:1c.0: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094888] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094893] pci 0000:00:1c.1: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.094992] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095006] pci 0000:00:1c.2: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095107] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095112] pci 0000:00:1c.3: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095175] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095239] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095302] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095366] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095426] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095490] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095496] pci 0000:00:1d.7: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095659] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.095897] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096545] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096553] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096562] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096570] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096579] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096615] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096620] pci 0000:00:1f.2: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096681] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096775] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096914] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096920] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.096930] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097060] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097200] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097206] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097214] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097276] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097415] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097421] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097430] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097539] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097631] pci 0000:05:00.0: PME# supported from D3hot Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097637] pci 0000:05:00.0: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097664] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097805] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097811] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097820] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097881] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097938] pci 0000:06:01.0: supports D1 D2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097941] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097946] pci 0000:06:01.0: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.097991] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098029] pci 0000:06:04.0: supports D1 D2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098032] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098038] pci 0000:06:04.0: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098081] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098152] pci 0000:06:04.1: supports D1 D2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098154] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098160] pci 0000:06:04.1: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098203] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098275] pci 0000:06:04.2: supports D1 D2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098277] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098283] pci 0000:06:04.2: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098327] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098398] pci 0000:06:04.3: supports D1 D2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098401] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098407] pci 0000:06:04.3: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098450] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098522] pci 0000:06:04.4: supports D1 D2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098524] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098530] pci 0000:06:04.4: PME# disabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098595] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098739] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098745] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098753] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098757] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098764] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.098817] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099035] pci_bus 0000:00: on NUMA node 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.099874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.105403] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.105949] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.106525] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.107112] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.107681] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.108367] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.108938] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.109510] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.110129] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.110376] vgaarb: loaded Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.110693] SCSI subsystem initialized Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.110860] libata version 3.00 loaded. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.111071] usbcore: registered new interface driver usbfs Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.111251] usbcore: registered new interface driver hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.111436] usbcore: registered new device driver usb Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.111830] PCI: Using ACPI for IRQ routing Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.111966] PCI: pci_cache_line_size set to 64 bytes Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112100] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112104] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112352] cfg80211: Calling CRDA to update world regulatory domain Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112539] NetLabel: Initializing Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112672] NetLabel: domain hash size = 128 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112806] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.112953] NetLabel: unlabeled traffic allowed by default Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.113103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.113371] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.115016] Switching to clocksource tsc Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.117231] pnp: PnP ACPI init Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.117370] ACPI: bus type pnp registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.141283] pnp: PnP ACPI: found 10 devices Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.141419] ACPI: ACPI bus type pnp unregistered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.141565] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.141707] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.141848] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.141989] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142129] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142283] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142427] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142571] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142711] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142851] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.142990] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.143129] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.143279] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.178127] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.178377] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.178518] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.178754] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.178897] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.179133] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.179285] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.179519] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.179755] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.179895] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180034] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180175] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180327] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180467] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180605] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180750] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.180893] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.181133] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.181282] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.181425] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.181568] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.181807] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.181944] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.182087] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.182240] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.182480] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.182620] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.182764] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.182908] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.183149] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.183399] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.183540] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.183687] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.183927] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.184067] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.184216] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.184360] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.184598] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.184736] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.184879] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.185020] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.185268] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.185413] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.185552] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.185696] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.185840] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.186086] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.186418] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.186556] PCI: setting IRQ 11 as level-triggered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.186563] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.186805] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.186977] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187116] PCI: setting IRQ 6 as level-triggered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187122] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187375] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187547] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187686] PCI: setting IRQ 10 as level-triggered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187693] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.187932] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188100] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188253] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188492] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188498] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188640] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188655] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188894] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188898] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188901] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188904] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188907] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188910] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188913] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188917] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188920] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188923] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188926] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188929] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188932] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188935] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188939] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188942] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188945] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188948] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188951] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188954] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188957] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188960] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188963] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.188987] NET: Registered protocol family 2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.189171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.189553] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.190563] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.190913] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.191054] TCP reno registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.191188] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.191348] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.191581] NET: Registered protocol family 1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.191824] RPC: Registered udp transport module. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.191961] RPC: Registered tcp transport module. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192097] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192276] pci 0000:00:02.0: Boot video device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192300] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192302] pci 0000:00:1d.0: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192323] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192325] pci 0000:00:1d.1: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192345] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192347] pci 0000:00:1d.2: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192366] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192369] pci 0000:00:1d.3: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192433] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.192580] Simple Boot Flag at 0x36 set to 0x1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.193367] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.193549] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.193786] Scanning for low memory corruption every 60 seconds Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.194342] audit: initializing netlink socket (disabled) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.194491] type=2000 audit(1279040855.194:1): initialized Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.223181] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.226539] VFS: Disk quotas dquot_6.5.2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.226755] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.227825] msgmni has been set to 1762 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.228061] SELinux: Registering netfilter hooks Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.228259] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.229170] alg: No test for stdrng (krng) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.229510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.229747] io scheduler noop registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.229880] io scheduler deadline registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.230032] io scheduler cfq registered (default) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.230321] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.230498] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.230683] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.230867] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.231118] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.234988] Non-volatile memory driver v1.3 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.235156] intel_rng: FWH not detected Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.235341] Linux agpgart interface v0.103 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.235489] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.235937] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.238835] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.243509] ACPI: AC Adapter [ACAD] (on-line) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.243810] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.244095] ACPI: Lid Switch [LID] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.244323] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.244563] ACPI: Sleep Button [SLPB] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.247475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.247713] ACPI: Power Button [PWRB] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.247939] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.248172] ACPI: Power Button [PWRF] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.248737] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.248978] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.249654] Marking TSC unstable due to TSC halts in idle Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.249892] Switching to clocksource hpet Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.278997] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.279162] ACPI: Thermal Zone [TZ00] (58 C) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.286674] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.286820] ACPI: Thermal Zone [TZ01] (58 C) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.287087] [drm] Initialized drm 1.1.0 20060810 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.287245] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.287483] i915 0000:00:02.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.290467] [drm] set up 7M of stolen space Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.394162] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 0.394643] [drm] initialized overlay support Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.095839] Console: switching to colour frame buffer device 160x50 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.101236] fb0: inteldrmfb frame buffer device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.101279] registered panic notifier Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.101321] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.101446] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.104100] brd: module loaded Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.105193] loop: module loaded Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.105573] ata_piix 0000:00:1f.2: version 2.13 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.105596] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.105678] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.256041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.256108] scsi0 : ata_piix Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.256271] scsi1 : ata_piix Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.257542] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.257609] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.258214] console [netcon0] enabled Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.258253] netconsole: network logging started Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.258357] usbcore: registered new interface driver libusual Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.258512] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.260978] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.261128] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.261179] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.261266] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.261317] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.261366] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.261596] mice: PS/2 mouse device common for all mice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.262188] rtc_cmos 00:07: RTC can wake from S4 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.262300] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.263543] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.264807] i2c /dev entries driver Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.266611] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.268248] cpuidle: using governor ladder Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.269754] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.271722] cpuidle: using governor menu Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.274481] usbcore: registered new interface driver hiddev Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.276257] usbcore: registered new interface driver usbhid Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.277803] usbhid: USB HID core driver Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.279675] GACT probability on Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.281262] Mirror/redirect action on Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.282890] Simple TC action Loaded Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.284772] netem: version 1.2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.286436] u32 classifier Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.288115] Performance counters on Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.289832] input device check on Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.291554] Actions configured Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.293292] Netfilter messages via NETLINK v0.30. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.295109] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.297107] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.298949] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.300785] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.302779] ctnetlink v0.93: registering with nfnetlink. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.304616] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.306473] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.308365] xt_time: kernel timezone is -0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.310783] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.312634] ClusterIP Version 0.8 loaded successfully Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.314488] arp_tables: (C) 2002 David S. Miller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.316357] TCP cubic registered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.318181] Initializing XFRM netlink socket Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.320047] NET: Registered protocol family 17 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.322114] PM: Resume from disk failed. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.322132] registered taskstats version 1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.324343] Magic number: 2:849:137 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.326168] block ram2: hash matches Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.411553] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.413345] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.418515] ata1.00: configured for UDMA/100 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.420397] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.422587] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.424526] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.426557] sd 0:0:0:0: [sda] Write Protect is off Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.428540] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.428586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.430690] sda: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.450425] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.454557] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.495334] ata2.00: configured for UDMA/33 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.502824] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.511467] sda7 > Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.514108] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.518834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.520768] Uniform CD-ROM driver Revision: 3.20 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.522854] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.522960] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.877163] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.909662] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.940385] kjournald starting. Commit interval 5 seconds Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.942478] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.944618] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.946767] Freeing unused kernel memory: 332k freed Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.949115] Write protecting the kernel text: 3500k Jul 13 17:07:53 OnlyTux-Poland kernel: [ 1.951324] Write protecting the kernel read-only data: 1700k Jul 13 17:07:53 OnlyTux-Poland kernel: [ 2.428057] async/0 used greatest stack depth: 6640 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 2.524047] async/1 used greatest stack depth: 6580 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 3.251795] stty used greatest stack depth: 6424 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 3.980255] cp used greatest stack depth: 6364 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.600068] udev: starting version 149 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.877428] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.877436] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.877439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.932862] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.932868] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.932880] b44 0000:06:01.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.940063] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.940071] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.940078] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.960132] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.960327] b44: b44.c:v2.0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 4.968746] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.104974] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105291] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105295] PCI: setting IRQ 5 as level-triggered Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105302] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105313] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105318] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105337] drivers/usb/core/inode.c: creating file 'devices' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105342] drivers/usb/core/inode.c: creating file '001' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105347] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105357] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105363] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105366] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105382] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105393] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105437] usb usb1: default language 0x0409 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105445] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105448] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105454] usb usb1: Product: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105456] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105459] usb usb1: SerialNumber: 0000:00:1d.0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105605] usb usb1: usb_probe_device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105609] usb usb1: configuration #1 chosen from 1 choice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105617] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105688] hub 1-0:1.0: usb_probe_interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105691] hub 1-0:1.0: usb_probe_interface - got id Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105694] hub 1-0:1.0: USB hub found Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105700] hub 1-0:1.0: 2 ports detected Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105702] hub 1-0:1.0: standalone hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105704] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105706] hub 1-0:1.0: individual port over-current protection Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105709] hub 1-0:1.0: power on to power good time: 2ms Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105714] hub 1-0:1.0: local power source is good Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105717] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105735] drivers/usb/core/inode.c: creating file '001' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105790] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105798] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105802] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105808] drivers/usb/core/inode.c: creating file '002' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105813] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105821] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105826] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105829] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105845] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105853] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105886] usb usb2: default language 0x0409 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105893] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105896] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105899] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105902] usb usb2: Product: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105905] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.105907] usb usb2: SerialNumber: 0000:00:1d.1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106291] usb usb2: usb_probe_device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106294] usb usb2: configuration #1 chosen from 1 choice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106302] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106381] hub 2-0:1.0: usb_probe_interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106384] hub 2-0:1.0: usb_probe_interface - got id Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106386] hub 2-0:1.0: USB hub found Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106392] hub 2-0:1.0: 2 ports detected Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106394] hub 2-0:1.0: standalone hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106396] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106398] hub 2-0:1.0: individual port over-current protection Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106401] hub 2-0:1.0: power on to power good time: 2ms Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106405] hub 2-0:1.0: local power source is good Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106407] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106424] drivers/usb/core/inode.c: creating file '001' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106476] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106485] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106489] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106495] drivers/usb/core/inode.c: creating file '003' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106500] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106508] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106513] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106516] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106532] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106540] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106575] usb usb3: default language 0x0409 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106582] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106590] usb usb3: Product: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106593] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106596] usb usb3: SerialNumber: 0000:00:1d.2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106908] usb usb3: usb_probe_device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106912] usb usb3: configuration #1 chosen from 1 choice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106920] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.106998] hub 3-0:1.0: usb_probe_interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107027] hub 3-0:1.0: usb_probe_interface - got id Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107030] hub 3-0:1.0: USB hub found Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107035] hub 3-0:1.0: 2 ports detected Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107037] hub 3-0:1.0: standalone hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107039] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107041] hub 3-0:1.0: individual port over-current protection Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107044] hub 3-0:1.0: power on to power good time: 2ms Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107048] hub 3-0:1.0: local power source is good Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107050] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107067] drivers/usb/core/inode.c: creating file '001' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107126] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107134] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107138] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107144] drivers/usb/core/inode.c: creating file '004' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107149] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107158] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107163] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107166] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107182] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107189] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107228] usb usb4: default language 0x0409 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107236] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107239] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107242] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107245] usb usb4: Product: UHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107247] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107250] usb usb4: SerialNumber: 0000:00:1d.3 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107568] usb usb4: usb_probe_device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107571] usb usb4: configuration #1 chosen from 1 choice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107580] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107657] hub 4-0:1.0: usb_probe_interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107660] hub 4-0:1.0: usb_probe_interface - got id Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107662] hub 4-0:1.0: USB hub found Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107667] hub 4-0:1.0: 2 ports detected Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107670] hub 4-0:1.0: standalone hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107672] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107674] hub 4-0:1.0: individual port over-current protection Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107676] hub 4-0:1.0: power on to power good time: 2ms Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107680] hub 4-0:1.0: local power source is good Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107683] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.107699] drivers/usb/core/inode.c: creating file '001' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128528] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128532] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128535] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128578] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128599] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128603] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128611] drivers/usb/core/inode.c: creating file '005' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128618] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128631] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128636] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128652] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128665] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.128671] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.132571] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.132574] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.132654] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.132659] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.136535] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142050] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142102] usb usb5: default language 0x0409 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142109] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142115] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142118] usb usb5: Product: EHCI Host Controller Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142121] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142123] usb usb5: SerialNumber: 0000:00:1d.7 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142251] usb usb5: usb_probe_device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142255] usb usb5: configuration #1 chosen from 1 choice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142263] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142325] hub 5-0:1.0: usb_probe_interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142328] hub 5-0:1.0: usb_probe_interface - got id Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142331] hub 5-0:1.0: USB hub found Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142336] hub 5-0:1.0: 8 ports detected Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142338] hub 5-0:1.0: standalone hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142341] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142343] hub 5-0:1.0: individual port over-current protection Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142346] hub 5-0:1.0: power on to power good time: 20ms Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142350] hub 5-0:1.0: local power source is good Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142353] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142393] drivers/usb/core/inode.c: creating file '001' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142416] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142419] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142422] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.142425] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.205115] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.206047] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.207054] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.207072] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.248346] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.248351] hub 5-0:1.0: port 7: status 0501 change 0001 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.256087] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.256102] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.256140] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.721140] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.721145] hub 5-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.721155] hub 5-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.721165] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772590] ath: EEPROM regdomain: 0x65 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772592] ath: EEPROM indicates we should expect a direct regpair map Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772596] ath: Country alpha2 being used: 00 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772598] ath: Regpair used: 0x65 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772842] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772866] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772872] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772880] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.772886] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.775330] phy0: Selected rate control algorithm 'minstrel' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.775714] Registered led device: ath5k-phy0::rx Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.775733] Registered led device: ath5k-phy0::tx Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.775737] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.876050] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.953749] sdhci: Secure Digital Host Controller Interface driver Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.953752] sdhci: Copyright(c) Pierre Ossman Jul 13 17:07:53 OnlyTux-Poland kernel: [ 5.978067] usb 4-1: new low speed USB device using uhci_hcd and address 2 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049421] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049439] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049451] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049552] Registered led device: mmc0:: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049614] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049626] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049641] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049649] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049720] Registered led device: mmc1:: Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.049774] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.122323] usb 4-1: skipped 1 descriptor after interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.127241] usb 4-1: default language 0x0409 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145228] usb 4-1: udev 2, busnum 4, minor = 385 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145232] usb 4-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145235] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145238] usb 4-1: Product: Compact Optical Mouse 500 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145241] usb 4-1: Manufacturer: Microsoft Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145327] usb 4-1: usb_probe_device Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.145331] usb 4-1: configuration #1 chosen from 1 choice Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.158382] usb 4-1: adding 4-1:1.0 (config #1, interface 0) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.158518] usbhid 4-1:1.0: usb_probe_interface Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.158522] usbhid 4-1:1.0: usb_probe_interface - got id Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.172652] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input7 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.172843] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.172874] drivers/usb/core/inode.c: creating file '002' Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.204042] usb usb1: suspend_rh (auto-stop) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.204068] usb usb2: suspend_rh (auto-stop) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.204094] usb usb3: suspend_rh (auto-stop) Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.469373] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.469379] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.469410] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 17:07:53 OnlyTux-Poland kernel: [ 6.832106] udevd used greatest stack depth: 6108 bytes left Jul 13 17:07:53 OnlyTux-Poland kernel: [ 7.464949] EXT3-fs (sda6): using internal journal Jul 13 17:07:53 OnlyTux-Poland kernel: [ 8.768624] kjournald starting. Commit interval 5 seconds Jul 13 17:07:53 OnlyTux-Poland kernel: [ 8.768832] EXT3-fs (sda7): using internal journal Jul 13 17:07:53 OnlyTux-Poland kernel: [ 8.768836] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 17:07:53 OnlyTux-Poland kernel: [ 8.806386] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 8.845986] NTFS volume version 3.1. Jul 13 17:07:53 OnlyTux-Poland kernel: [ 8.956360] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 17:07:54 OnlyTux-Poland acpid: starting up with proc fs Jul 13 17:07:54 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 17:07:54 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 17:07:54 OnlyTux-Poland acpid: 1 rule loaded Jul 13 17:07:54 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 17:07:54 OnlyTux-Poland rc-scripts: cpufreqd requires the kernel to be configured with CONFIG_CPU_FREQ Jul 13 17:07:54 OnlyTux-Poland rc-scripts: Make sure that the appropiate kernel drivers for your CPU are Jul 13 17:07:54 OnlyTux-Poland rc-scripts: built-in or loaded. Jul 13 17:07:54 OnlyTux-Poland /usr/sbin/gpm[3176]: *** info [daemon/startup.c(136)]: Jul 13 17:07:54 OnlyTux-Poland /usr/sbin/gpm[3176]: Started gpm successfully. Entered daemon mode. Jul 13 17:07:54 OnlyTux-Poland kernel: [ 19.713338] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:07:54 OnlyTux-Poland /usr/sbin/gpm[3176]: *** info [mice.c(1988)]: Jul 13 17:07:54 OnlyTux-Poland /usr/sbin/gpm[3176]: imps2: Auto-detected intellimouse PS/2 Jul 13 17:07:57 OnlyTux-Poland acpid: client connected from 3443[102:1002] Jul 13 17:07:57 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:07:58 OnlyTux-Poland dhcpcd[3963]: eth0: dhcpcd 4.0.15 starting Jul 13 17:07:58 OnlyTux-Poland dhcpcd[3963]: eth0: broadcasting for a lease Jul 13 17:08:01 OnlyTux-Poland kernel: [ 26.704222] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 17:08:01 OnlyTux-Poland kernel: [ 26.704226] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 17:08:03 OnlyTux-Poland dhcpcd[3963]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 17:08:03 OnlyTux-Poland dhcpcd[3963]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 17:08:03 OnlyTux-Poland dhcpcd[3963]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 17:08:08 OnlyTux-Poland dhcpcd[3963]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 17:08:08 OnlyTux-Poland cron[4175]: (CRON) STARTUP (V5.0) Jul 13 17:08:14 OnlyTux-Poland login[4243]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 13 17:08:14 OnlyTux-Poland login[4250]: ROOT LOGIN on '/dev/tty1' Jul 13 17:08:25 OnlyTux-Poland login[4244]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 13 17:08:25 OnlyTux-Poland login[4263]: ROOT LOGIN on '/dev/tty2' Jul 13 17:10:01 OnlyTux-Poland kernel: [ 145.964456] kjournald starting. Commit interval 5 seconds Jul 13 17:10:01 OnlyTux-Poland kernel: [ 145.975561] EXT3-fs (sda2): using internal journal Jul 13 17:10:01 OnlyTux-Poland kernel: [ 145.975566] EXT3-fs (sda2): mounted filesystem with writeback data mode Jul 13 17:10:01 OnlyTux-Poland cron[7902]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 17:10:41 OnlyTux-Poland kernel: [ 186.097552] cc1 used greatest stack depth: 6104 bytes left Jul 13 17:11:11 OnlyTux-Poland shutdown[10437]: shutting down for system reboot Jul 13 17:11:14 OnlyTux-Poland init: Switching to runlevel: 6 Jul 13 17:11:18 OnlyTux-Poland dhcpcd[3970]: eth0: received SIGTERM, stopping Jul 13 17:11:18 OnlyTux-Poland kernel: [ 223.399071] b44 ssb0:0: eth0: powering down PHY Jul 13 17:11:19 OnlyTux-Poland kernel: [ 224.761884] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:11:20 OnlyTux-Poland acpid: exiting Jul 13 17:11:21 OnlyTux-Poland syslog-ng[2943]: Termination requested via signal, terminating; Jul 13 17:11:21 OnlyTux-Poland syslog-ng[2943]: syslog-ng shutting down; version='3.1.1' Jul 13 17:11:55 OnlyTux-Poland syslog-ng[2953]: syslog-ng starting up; version='3.1.1' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #5 Tue Jul 13 17:10:39 CEST 2010 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1556a2c, node_mem_map c1659300 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016525f4] TEXT DATA BSS Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #3 [0001653000 - 00016590d5] BRK Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #6 [0001659100 - 0001d59100] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #7 [0001652600 - 0001652604] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #8 [0001652680 - 0001652700] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #9 [0001652700 - 0001652754] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d59100 - 0001d5b100] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #11 [0001652780 - 00016527a5] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #12 [0001652800 - 0001652988] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #13 [0001652a00 - 0001652a40] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #14 [0001652a80 - 0001652ac0] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #15 [0001652b00 - 0001652b40] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #16 [0001652b80 - 0001652bc0] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #17 [0001652c00 - 0001652c40] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #18 [0001652c80 - 0001652cc0] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #19 [0001652d00 - 0001652d40] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #20 [0001652d80 - 0001652dc0] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #21 [0001652e00 - 0001652e40] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #22 [0001652e80 - 0001652ec0] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #23 [0001652f00 - 0001652f40] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #24 [0001652f80 - 0001652fc0] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5b100 - 0001d5b140] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5b180 - 0001d5b190] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5b200 - 0001d5b20f] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5b280 - 0001d5b28f] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5b300 - 0001d5f300] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d5f300 - 0001ddf300] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] #31 [0001ddf300 - 0001e1f300] BOOTMEM Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Memory: 902448k/917384k available (3493k kernel code, 14484k reserved, 2021k data, 328k init, 0k highmem) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1563000 - 0xc15b5000 ( 328 kB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369410 - 0xc1562b24 (2021 kB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369410 (3493 kB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.946 MHz processor. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.89 BogoMIPS (lpj=1728946) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002145] Security Framework initialized Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002284] SELinux: Initializing. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002417] SELinux: Starting in permissive mode Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002423] Mount-cache hash table entries: 512 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002657] Initializing cgroup subsys ns Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002795] Initializing cgroup subsys cpuacct Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.002931] Initializing cgroup subsys freezer Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.003004] Initializing cgroup subsys net_cls Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.003160] mce: CPU supports 6 MCE banks Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.003301] using mwait in idle threads. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.003439] Performance Events: Core events, core PMU driver. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.003644] ... version: 1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.003779] ... bit width: 40 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004003] ... generic registers: 2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004137] ... value mask: 000000ffffffffff Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004274] ... max period: 000000007fffffff Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004409] ... fixed-purpose events: 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004544] ... event mask: 0000000000000003 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004682] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.004888] Checking 'hlt' instruction... OK. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.008593] ACPI: Core revision 20100121 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.020908] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.023095] khelper used greatest stack depth: 7296 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.023483] Time: 17:11:37 Date: 07/13/10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.023650] NET: Registered protocol family 16 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.024186] ACPI: bus type pci registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.024441] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.024679] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.024819] PCI: Using MMCONFIG for extended config space Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.024955] PCI: Using configuration type 1 for base access Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.025462] khelper used greatest stack depth: 7260 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.031043] bio: create slab at 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.032504] ACPI: EC: Look up EC in DSDT Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.036202] ACPI: BIOS _OSI(Linux) query ignored Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.037270] ACPI: Interpreter enabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.037415] ACPI: (supports S0 S3 S4 S5) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.037695] ACPI: Using PIC for interrupt routing Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.090587] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.091324] ACPI: No dock devices found. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.092006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.092848] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094323] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094327] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094330] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094334] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094337] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094340] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094344] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094410] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094415] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094421] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094426] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094465] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094571] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094638] pci 0000:00:1b.0: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094734] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094740] pci 0000:00:1c.0: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094838] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094843] pci 0000:00:1c.1: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094942] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.094947] pci 0000:00:1c.2: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095057] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095063] pci 0000:00:1c.3: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095126] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095190] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095253] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095317] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095376] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095440] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095446] pci 0000:00:1d.7: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095608] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095844] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.095987] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096306] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096315] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096323] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096331] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096340] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096376] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096382] pci 0000:00:1f.2: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096443] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096537] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096675] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096681] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096690] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.096752] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097016] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097022] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097031] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097093] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097231] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097237] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097246] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097354] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097446] pci 0000:05:00.0: PME# supported from D3hot Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097452] pci 0000:05:00.0: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097479] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097618] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097624] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097633] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097695] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097752] pci 0000:06:01.0: supports D1 D2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097754] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097759] pci 0000:06:01.0: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097804] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097832] pci 0000:06:04.0: supports D1 D2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097835] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.097841] pci 0000:06:04.0: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098018] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098090] pci 0000:06:04.1: supports D1 D2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098092] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098098] pci 0000:06:04.1: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098140] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098211] pci 0000:06:04.2: supports D1 D2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098214] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098220] pci 0000:06:04.2: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098263] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098334] pci 0000:06:04.3: supports D1 D2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098336] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098342] pci 0000:06:04.3: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098385] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098457] pci 0000:06:04.4: supports D1 D2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098459] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098465] pci 0000:06:04.4: PME# disabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098529] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098673] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098679] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098688] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098691] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098698] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.098751] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099031] pci_bus 0000:00: on NUMA node 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.099862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.105324] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.105869] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.106421] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.107027] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.107597] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.108241] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.108811] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.109411] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.110047] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.110288] vgaarb: loaded Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.110604] SCSI subsystem initialized Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.110769] libata version 3.00 loaded. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.110957] usbcore: registered new interface driver usbfs Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.111057] usbcore: registered new interface driver hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.111244] usbcore: registered new device driver usb Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.111634] PCI: Using ACPI for IRQ routing Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.111769] PCI: pci_cache_line_size set to 64 bytes Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.111872] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.111875] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.112256] cfg80211: Calling CRDA to update world regulatory domain Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.112443] NetLabel: Initializing Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.112575] NetLabel: domain hash size = 128 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.112709] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.112856] NetLabel: unlabeled traffic allowed by default Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.113101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.113368] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.115016] Switching to clocksource tsc Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.117190] pnp: PnP ACPI init Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.117359] ACPI: bus type pnp registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.143387] pnp: PnP ACPI: found 10 devices Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.143523] ACPI: ACPI bus type pnp unregistered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.143669] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.143810] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.143950] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144090] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144230] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144396] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144539] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144681] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144818] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.144955] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.145094] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.145234] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.145383] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.180222] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.180475] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.180616] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.180850] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.180991] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.181224] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.181376] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.181606] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.181835] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.181973] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182112] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182250] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182399] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182538] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182675] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182818] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.182961] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.183199] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.183348] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.183490] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.183632] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.183870] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184008] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184150] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184293] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184541] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184680] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184823] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.184965] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.185207] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.185451] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.185592] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.185736] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.185975] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.186113] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.186251] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.186406] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.186644] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.186782] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.186924] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.187065] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.187310] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.187453] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.187591] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.187734] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.187876] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.188122] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.188454] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.188592] PCI: setting IRQ 11 as level-triggered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.188599] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.188838] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189011] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189147] PCI: setting IRQ 6 as level-triggered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189154] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189401] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189572] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189710] PCI: setting IRQ 10 as level-triggered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189716] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.189952] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190122] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190261] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190509] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190516] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190656] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190671] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190909] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190912] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190915] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190918] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190921] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190925] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190928] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190931] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190934] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190937] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190940] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190943] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190946] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190949] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190953] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190956] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190959] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190962] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190965] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190968] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190971] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190974] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.190977] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.191001] NET: Registered protocol family 2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.191189] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.191568] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.192577] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.192925] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.193065] TCP reno registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.193198] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.193358] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.193592] NET: Registered protocol family 1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.193829] RPC: Registered udp transport module. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.193964] RPC: Registered tcp transport module. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194098] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194248] pci 0000:00:02.0: Boot video device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194270] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194272] pci 0000:00:1d.0: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194293] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194295] pci 0000:00:1d.1: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194343] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194345] pci 0000:00:1d.2: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194364] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194367] pci 0000:00:1d.3: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194430] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.194576] Simple Boot Flag at 0x36 set to 0x1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.195364] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.195546] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.195781] Scanning for low memory corruption every 60 seconds Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.196291] audit: initializing netlink socket (disabled) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.196487] type=2000 audit(1279041097.196:1): initialized Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.225130] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.228452] VFS: Disk quotas dquot_6.5.2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.228669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.229733] msgmni has been set to 1762 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.229967] SELinux: Registering netfilter hooks Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.230139] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.231056] alg: No test for stdrng (krng) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.231386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.231619] io scheduler noop registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.231750] io scheduler deadline registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.231897] io scheduler cfq registered (default) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.232160] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.232367] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.232541] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.232720] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.232972] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.236814] Non-volatile memory driver v1.3 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.236979] intel_rng: FWH not detected Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.237112] Linux agpgart interface v0.103 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.237258] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.237754] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.240653] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.242434] ACPI: AC Adapter [ACAD] (on-line) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.242930] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.243210] ACPI: Lid Switch [LID] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.243441] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.243679] ACPI: Sleep Button [SLPB] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.246556] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.246793] ACPI: Power Button [PWRB] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.247019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.247253] ACPI: Power Button [PWRF] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.247811] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.248048] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.248710] Marking TSC unstable due to TSC halts in idle Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.248947] Switching to clocksource hpet Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.276030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.276222] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.276432] ACPI: Thermal Zone [TZ00] (59 C) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.287075] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.287220] ACPI: Thermal Zone [TZ01] (59 C) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.287465] [drm] Initialized drm 1.1.0 20060810 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.287621] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.287855] i915 0000:00:02.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.290638] [drm] set up 7M of stolen space Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.394309] [drm] initialized overlay support Jul 13 17:11:55 OnlyTux-Poland kernel: [ 0.664074] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.123831] Console: switching to colour frame buffer device 160x50 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.129232] fb0: inteldrmfb frame buffer device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.129275] registered panic notifier Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.129317] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.129444] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.132102] brd: module loaded Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.133182] loop: module loaded Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.133566] ata_piix 0000:00:1f.2: version 2.13 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.133589] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.133671] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.284041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.284110] scsi0 : ata_piix Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.284270] scsi1 : ata_piix Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.285542] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.285611] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.286218] console [netcon0] enabled Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.286256] netconsole: network logging started Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.286362] usbcore: registered new interface driver libusual Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.286518] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288081] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288212] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288263] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288348] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288399] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288448] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.288686] mice: PS/2 mouse device common for all mice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.289275] rtc_cmos 00:07: RTC can wake from S4 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.289387] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.290623] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.291888] i2c /dev entries driver Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.293562] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.295197] cpuidle: using governor ladder Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.296698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.298665] cpuidle: using governor menu Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.301446] usbcore: registered new interface driver hiddev Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.303247] usbcore: registered new interface driver usbhid Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.304791] usbhid: USB HID core driver Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.306666] GACT probability on Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.308262] Mirror/redirect action on Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.309890] Simple TC action Loaded Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.311766] netem: version 1.2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.313432] u32 classifier Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.315136] Performance counters on Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.316854] input device check on Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.318579] Actions configured Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.320317] Netfilter messages via NETLINK v0.30. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.322134] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.324138] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.325984] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.327825] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.329822] ctnetlink v0.93: registering with nfnetlink. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.331663] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.333521] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.335408] xt_time: kernel timezone is -0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.337827] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.339682] ClusterIP Version 0.8 loaded successfully Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.341538] arp_tables: (C) 2002 David S. Miller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.343405] TCP cubic registered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.345233] Initializing XFRM netlink socket Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.347083] NET: Registered protocol family 17 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.349154] PM: Resume from disk failed. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.349171] registered taskstats version 1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.351377] Magic number: 2:402:188 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.353262] acpi device:1a: hash matches Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.439552] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.441341] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.446514] ata1.00: configured for UDMA/100 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.448403] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.450603] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.452545] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.454581] sd 0:0:0:0: [sda] Write Protect is off Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.456509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.456555] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.458658] sda: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.478457] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.482595] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.523334] ata2.00: configured for UDMA/33 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.527854] sda7 > Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.530490] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.533669] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.546207] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.548118] Uniform CD-ROM driver Revision: 3.20 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.550188] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.550295] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.905297] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.937730] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.978984] kjournald starting. Commit interval 5 seconds Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.981067] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.983173] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.985292] Freeing unused kernel memory: 328k freed Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.987584] Write protecting the kernel text: 3496k Jul 13 17:11:55 OnlyTux-Poland kernel: [ 1.989744] Write protecting the kernel read-only data: 1696k Jul 13 17:11:55 OnlyTux-Poland kernel: [ 2.456055] async/0 used greatest stack depth: 6544 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 3.268202] stty used greatest stack depth: 6364 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.638138] udev: starting version 149 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.937960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.937965] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938246] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938249] PCI: setting IRQ 5 as level-triggered Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938256] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938277] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938281] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938300] drivers/usb/core/inode.c: creating file 'devices' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938304] drivers/usb/core/inode.c: creating file '001' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938319] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938325] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938344] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938357] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.938363] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.942242] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.942245] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.942647] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.942654] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.946543] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952195] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952257] usb usb1: default language 0x0409 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952265] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952274] usb usb1: Product: EHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952277] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952280] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952401] usb usb1: usb_probe_device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952405] usb usb1: configuration #1 chosen from 1 choice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952415] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952479] hub 1-0:1.0: usb_probe_interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952482] hub 1-0:1.0: usb_probe_interface - got id Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952485] hub 1-0:1.0: USB hub found Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952491] hub 1-0:1.0: 8 ports detected Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952493] hub 1-0:1.0: standalone hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952495] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952497] hub 1-0:1.0: individual port over-current protection Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952500] hub 1-0:1.0: power on to power good time: 20ms Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952505] hub 1-0:1.0: local power source is good Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952508] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952549] drivers/usb/core/inode.c: creating file '001' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952800] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952813] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 4.952853] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.418126] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.418130] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.470127] ath: EEPROM regdomain: 0x65 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.470131] ath: EEPROM indicates we should expect a direct regpair map Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.470135] ath: Country alpha2 being used: 00 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.470137] ath: Regpair used: 0x65 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.472824] phy0: Selected rate control algorithm 'minstrel' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.473232] Registered led device: ath5k-phy0::rx Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.473248] Registered led device: ath5k-phy0::tx Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.473252] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481633] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481709] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481720] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481724] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481734] drivers/usb/core/inode.c: creating file '002' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481740] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481749] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481755] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481758] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481774] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481783] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481827] usb usb2: default language 0x0409 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481835] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481844] usb usb2: Product: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481846] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.481849] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482277] usb usb2: usb_probe_device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482282] usb usb2: configuration #1 chosen from 1 choice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482292] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482378] hub 2-0:1.0: usb_probe_interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482381] hub 2-0:1.0: usb_probe_interface - got id Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482383] hub 2-0:1.0: USB hub found Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482389] hub 2-0:1.0: 2 ports detected Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482392] hub 2-0:1.0: standalone hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482394] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482396] hub 2-0:1.0: individual port over-current protection Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482399] hub 2-0:1.0: power on to power good time: 2ms Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482403] hub 2-0:1.0: local power source is good Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482406] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482426] drivers/usb/core/inode.c: creating file '001' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482467] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482489] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482498] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482502] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482509] drivers/usb/core/inode.c: creating file '003' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482514] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482522] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482528] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482531] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482547] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482555] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482594] usb usb3: default language 0x0409 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482601] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482604] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482607] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482610] usb usb3: Product: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482612] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482615] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482978] usb usb3: usb_probe_device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482982] usb usb3: configuration #1 chosen from 1 choice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.482992] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483114] hub 3-0:1.0: usb_probe_interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483117] hub 3-0:1.0: usb_probe_interface - got id Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483119] hub 3-0:1.0: USB hub found Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483125] hub 3-0:1.0: 2 ports detected Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483127] hub 3-0:1.0: standalone hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483129] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483131] hub 3-0:1.0: individual port over-current protection Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483134] hub 3-0:1.0: power on to power good time: 2ms Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483138] hub 3-0:1.0: local power source is good Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483141] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483157] drivers/usb/core/inode.c: creating file '001' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483196] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483216] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483225] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483230] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483238] drivers/usb/core/inode.c: creating file '004' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483243] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483251] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483257] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483260] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483277] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483287] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483324] usb usb4: default language 0x0409 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483331] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483337] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483340] usb usb4: Product: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483342] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483345] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483694] usb usb4: usb_probe_device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483698] usb usb4: configuration #1 chosen from 1 choice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483706] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483791] hub 4-0:1.0: usb_probe_interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483794] hub 4-0:1.0: usb_probe_interface - got id Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483796] hub 4-0:1.0: USB hub found Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483802] hub 4-0:1.0: 2 ports detected Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483804] hub 4-0:1.0: standalone hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483806] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483808] hub 4-0:1.0: individual port over-current protection Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483811] hub 4-0:1.0: power on to power good time: 2ms Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483815] hub 4-0:1.0: local power source is good Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483817] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483834] drivers/usb/core/inode.c: creating file '001' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483872] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483892] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483901] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483905] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483911] drivers/usb/core/inode.c: creating file '005' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483918] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483926] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483932] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483935] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483951] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483959] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.483996] usb usb5: default language 0x0409 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484032] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484041] usb usb5: Product: UHCI Host Controller Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484043] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484046] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484147] usb usb5: usb_probe_device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484150] usb usb5: configuration #1 chosen from 1 choice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484157] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484217] hub 5-0:1.0: usb_probe_interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484220] hub 5-0:1.0: usb_probe_interface - got id Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484222] hub 5-0:1.0: USB hub found Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484227] hub 5-0:1.0: 2 ports detected Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484229] hub 5-0:1.0: standalone hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484231] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484234] hub 5-0:1.0: individual port over-current protection Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484236] hub 5-0:1.0: power on to power good time: 2ms Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484240] hub 5-0:1.0: local power source is good Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484243] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484257] drivers/usb/core/inode.c: creating file '001' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.484287] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.518438] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.518451] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.518462] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.569060] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.569089] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.582060] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.583056] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.583059] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.584036] uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.584039] hub 5-0:1.0: port 1: status 0301 change 0003 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.602784] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.602790] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.602803] b44 0000:06:01.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.610299] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.610344] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.610352] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.610509] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.610516] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.610520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.626779] sdhci: Secure Digital Host Controller Interface driver Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.626782] sdhci: Copyright(c) Pierre Ossman Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.634088] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.634276] b44: b44.c:v2.0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.642682] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.651970] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.651987] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652000] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652144] Registered led device: mmc0:: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652207] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652226] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652241] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652249] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652315] Registered led device: mmc1:: Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.652374] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.684056] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.684071] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.752157] modprobe used greatest stack depth: 6328 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.786057] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.934023] usb 5-1: skipped 1 descriptor after interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.939032] usb 5-1: default language 0x0409 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957021] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957025] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957028] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957031] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957034] usb 5-1: Manufacturer: Microsoft Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957127] usb 5-1: usb_probe_device Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.957132] usb 5-1: configuration #1 chosen from 1 choice Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.970018] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.970069] usbhid 5-1:1.0: usb_probe_interface Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.970072] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.984439] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.984622] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 5.984657] drivers/usb/core/inode.c: creating file '002' Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.143666] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.143672] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.143706] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.414700] modprobe used greatest stack depth: 6300 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.704066] usb usb2: suspend_rh (auto-stop) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.704096] usb usb3: suspend_rh (auto-stop) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 6.704121] usb usb4: suspend_rh (auto-stop) Jul 13 17:11:55 OnlyTux-Poland kernel: [ 7.009879] lvm used greatest stack depth: 5964 bytes left Jul 13 17:11:55 OnlyTux-Poland kernel: [ 7.325042] EXT3-fs (sda6): using internal journal Jul 13 17:11:55 OnlyTux-Poland kernel: [ 8.573893] kjournald starting. Commit interval 5 seconds Jul 13 17:11:55 OnlyTux-Poland kernel: [ 8.574169] EXT3-fs (sda7): using internal journal Jul 13 17:11:55 OnlyTux-Poland kernel: [ 8.574173] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 17:11:55 OnlyTux-Poland kernel: [ 8.606321] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 8.651346] NTFS volume version 3.1. Jul 13 17:11:55 OnlyTux-Poland kernel: [ 8.761622] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 17:11:56 OnlyTux-Poland acpid: starting up with proc fs Jul 13 17:11:56 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 17:11:56 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 17:11:56 OnlyTux-Poland acpid: 1 rule loaded Jul 13 17:11:56 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 17:11:56 OnlyTux-Poland rc-scripts: cpufreqd requires the kernel to be configured with CONFIG_CPU_FREQ Jul 13 17:11:56 OnlyTux-Poland rc-scripts: Make sure that the appropiate kernel drivers for your CPU are Jul 13 17:11:56 OnlyTux-Poland rc-scripts: built-in or loaded. Jul 13 17:11:56 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [daemon/startup.c(136)]: Jul 13 17:11:56 OnlyTux-Poland /usr/sbin/gpm[3186]: Started gpm successfully. Entered daemon mode. Jul 13 17:11:56 OnlyTux-Poland kernel: [ 19.251860] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:11:57 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [mice.c(1988)]: Jul 13 17:11:57 OnlyTux-Poland /usr/sbin/gpm[3186]: imps2: Auto-detected intellimouse PS/2 Jul 13 17:11:59 OnlyTux-Poland acpid: client connected from 3453[102:1002] Jul 13 17:11:59 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:12:00 OnlyTux-Poland dhcpcd[3973]: eth0: dhcpcd 4.0.15 starting Jul 13 17:12:00 OnlyTux-Poland dhcpcd[3973]: eth0: broadcasting for a lease Jul 13 17:12:04 OnlyTux-Poland kernel: [ 26.704222] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 17:12:04 OnlyTux-Poland kernel: [ 26.704226] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 17:12:05 OnlyTux-Poland dhcpcd[3973]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 17:12:05 OnlyTux-Poland dhcpcd[3973]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 17:12:05 OnlyTux-Poland dhcpcd[3973]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 17:12:10 OnlyTux-Poland dhcpcd[3973]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 17:12:11 OnlyTux-Poland cron[4185]: (CRON) STARTUP (V5.0) Jul 13 17:12:17 OnlyTux-Poland login[4253]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 13 17:12:20 OnlyTux-Poland acpid: client connected from 4282[0:1000] Jul 13 17:12:20 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:12:49 OnlyTux-Poland kernel: [ 72.268750] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 13 17:14:35 OnlyTux-Poland su[4401]: Successful su for root by onlyus Jul 13 17:14:35 OnlyTux-Poland su[4401]: + /dev/pts/0 onlyus:root Jul 13 17:14:35 OnlyTux-Poland su[4401]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 17:15:17 OnlyTux-Poland su[4638]: Successful su for root by onlyus Jul 13 17:15:17 OnlyTux-Poland su[4638]: + /dev/pts/1 onlyus:root Jul 13 17:15:17 OnlyTux-Poland su[4638]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 17:18:54 OnlyTux-Poland kernel: [ 436.942028] kjournald starting. Commit interval 5 seconds Jul 13 17:18:54 OnlyTux-Poland kernel: [ 436.949671] EXT3-fs (sda2): using internal journal Jul 13 17:18:54 OnlyTux-Poland kernel: [ 436.949676] EXT3-fs (sda2): mounted filesystem with writeback data mode Jul 13 17:19:04 OnlyTux-Poland su[4401]: pam_unix(su:session): session closed for user root Jul 13 17:19:06 OnlyTux-Poland kernel: [ 448.984132] firefox used greatest stack depth: 5732 bytes left Jul 13 17:19:06 OnlyTux-Poland kernel: [ 449.000659] firefox used greatest stack depth: 5564 bytes left Jul 13 17:19:10 OnlyTux-Poland shutdown[8468]: shutting down for system reboot Jul 13 17:19:11 OnlyTux-Poland init: Switching to runlevel: 6 Jul 13 17:19:11 OnlyTux-Poland kernel: [ 453.580074] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:19:11 OnlyTux-Poland kernel: [ 453.662265] X used greatest stack depth: 5520 bytes left Jul 13 17:19:11 OnlyTux-Poland kernel: [ 454.283388] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:19:12 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [mice.c(1988)]: Jul 13 17:19:12 OnlyTux-Poland /usr/sbin/gpm[3186]: imps2: Auto-detected intellimouse PS/2 Jul 13 17:19:18 OnlyTux-Poland dhcpcd[3980]: eth0: received SIGTERM, stopping Jul 13 17:19:18 OnlyTux-Poland kernel: [ 461.160213] b44 ssb0:0: eth0: powering down PHY Jul 13 17:19:22 OnlyTux-Poland kernel: [ 464.435856] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:19:24 OnlyTux-Poland acpid: exiting Jul 13 17:19:25 OnlyTux-Poland syslog-ng[2953]: Termination requested via signal, terminating; Jul 13 17:19:25 OnlyTux-Poland syslog-ng[2953]: syslog-ng shutting down; version='3.1.1' Jul 13 17:20:02 OnlyTux-Poland syslog-ng[2950]: syslog-ng starting up; version='3.1.1' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #6 Tue Jul 13 17:18:09 CEST 2010 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1556a2c, node_mem_map c1659300 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016525f4] TEXT DATA BSS Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #3 [0001653000 - 00016590d5] BRK Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #6 [0001659100 - 0001d59100] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #7 [0001652600 - 0001652604] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #8 [0001652680 - 0001652700] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #9 [0001652700 - 0001652754] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d59100 - 0001d5b100] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #11 [0001652780 - 00016527a5] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #12 [0001652800 - 0001652988] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #13 [0001652a00 - 0001652a40] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #14 [0001652a80 - 0001652ac0] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #15 [0001652b00 - 0001652b40] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #16 [0001652b80 - 0001652bc0] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #17 [0001652c00 - 0001652c40] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #18 [0001652c80 - 0001652cc0] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #19 [0001652d00 - 0001652d40] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #20 [0001652d80 - 0001652dc0] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #21 [0001652e00 - 0001652e40] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #22 [0001652e80 - 0001652ec0] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #23 [0001652f00 - 0001652f40] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #24 [0001652f80 - 0001652fc0] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5b100 - 0001d5b140] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5b180 - 0001d5b190] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5b200 - 0001d5b20f] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5b280 - 0001d5b28f] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5b300 - 0001d5f300] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d5f300 - 0001ddf300] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] #31 [0001ddf300 - 0001e1f300] BOOTMEM Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Memory: 902448k/917384k available (3493k kernel code, 14484k reserved, 2021k data, 328k init, 0k highmem) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1563000 - 0xc15b5000 ( 328 kB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369410 - 0xc1562b24 (2021 kB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369410 (3493 kB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.970 MHz processor. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.94 BogoMIPS (lpj=1728970) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002015] Security Framework initialized Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002153] SELinux: Initializing. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002290] SELinux: Starting in permissive mode Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002296] Mount-cache hash table entries: 512 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002534] Initializing cgroup subsys ns Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002671] Initializing cgroup subsys cpuacct Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002807] Initializing cgroup subsys freezer Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.002943] Initializing cgroup subsys net_cls Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.003026] mce: CPU supports 6 MCE banks Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.003167] using mwait in idle threads. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.003307] Performance Events: Core events, core PMU driver. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.003511] ... version: 1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.003646] ... bit width: 40 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.003780] ... generic registers: 2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.004003] ... value mask: 000000ffffffffff Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.004139] ... max period: 000000007fffffff Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.004275] ... fixed-purpose events: 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.004409] ... event mask: 0000000000000003 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.004545] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.004752] Checking 'hlt' instruction... OK. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.008596] ACPI: Core revision 20100121 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.020901] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.023278] khelper used greatest stack depth: 7296 bytes left Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.023664] Time: 17:19:44 Date: 07/13/10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.023831] NET: Registered protocol family 16 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.024370] ACPI: bus type pci registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.024625] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.024865] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.025011] PCI: Using MMCONFIG for extended config space Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.025147] PCI: Using configuration type 1 for base access Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.025574] khelper used greatest stack depth: 7260 bytes left Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.031313] bio: create slab at 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.032676] ACPI: EC: Look up EC in DSDT Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.036394] ACPI: BIOS _OSI(Linux) query ignored Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.037410] ACPI: Interpreter enabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.037557] ACPI: (supports S0 S3 S4 S5) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.037838] ACPI: Using PIC for interrupt routing Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.089585] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.090318] ACPI: No dock devices found. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.091006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.091843] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093307] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093311] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093314] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093318] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093321] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093324] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093328] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093395] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093401] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093406] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093412] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093450] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093556] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093618] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093623] pci 0000:00:1b.0: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093719] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093725] pci 0000:00:1c.0: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093823] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093828] pci 0000:00:1c.1: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093926] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.093931] pci 0000:00:1c.2: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094042] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094047] pci 0000:00:1c.3: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094111] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094175] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094238] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094302] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094362] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094426] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094432] pci 0000:00:1d.7: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094594] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094829] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.094971] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095307] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095315] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095323] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095332] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095340] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095376] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095382] pci 0000:00:1f.2: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095442] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095537] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095677] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095683] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095691] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.095753] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096017] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096023] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096031] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096093] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096233] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096239] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096247] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096355] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096447] pci 0000:05:00.0: PME# supported from D3hot Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096453] pci 0000:05:00.0: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096481] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096620] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096626] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096635] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096697] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096754] pci 0000:06:01.0: supports D1 D2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096756] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096761] pci 0000:06:01.0: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096806] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096834] pci 0000:06:04.0: supports D1 D2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096837] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.096843] pci 0000:06:04.0: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097004] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097075] pci 0000:06:04.1: supports D1 D2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097077] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097083] pci 0000:06:04.1: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097126] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097197] pci 0000:06:04.2: supports D1 D2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097200] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097206] pci 0000:06:04.2: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097247] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097318] pci 0000:06:04.3: supports D1 D2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097321] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097327] pci 0000:06:04.3: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097370] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097441] pci 0000:06:04.4: supports D1 D2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097444] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097450] pci 0000:06:04.4: PME# disabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097512] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097653] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097659] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097668] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097671] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097678] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.097731] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098010] pci_bus 0000:00: on NUMA node 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.098851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.104325] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.104869] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.105421] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.106024] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.106595] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.107242] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.107815] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.108444] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.109050] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.109292] vgaarb: loaded Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.109609] SCSI subsystem initialized Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.109774] libata version 3.00 loaded. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.109966] usbcore: registered new interface driver usbfs Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.110055] usbcore: registered new interface driver hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.110243] usbcore: registered new device driver usb Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.110636] PCI: Using ACPI for IRQ routing Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.110771] PCI: pci_cache_line_size set to 64 bytes Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.110873] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.110877] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.111266] cfg80211: Calling CRDA to update world regulatory domain Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.111455] NetLabel: Initializing Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.111587] NetLabel: domain hash size = 128 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.111721] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.111868] NetLabel: unlabeled traffic allowed by default Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.112098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.112366] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.114016] Switching to clocksource tsc Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.116205] pnp: PnP ACPI init Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.116375] ACPI: bus type pnp registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.140377] pnp: PnP ACPI: found 10 devices Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.140513] ACPI: ACPI bus type pnp unregistered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.140659] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.140799] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.140939] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141079] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141218] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141385] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141529] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141673] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141812] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.141950] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.142088] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.142227] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.142377] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.177362] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.177596] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.177737] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.177971] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.178111] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.178358] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.178498] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.178731] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.178964] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179103] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179243] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179391] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179531] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179669] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179804] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.179947] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.180087] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.180334] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.180472] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.180615] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.180758] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.180996] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.181134] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.181277] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.181431] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.181671] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.181808] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.181952] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.182094] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.182346] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.182578] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.182719] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.182863] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.183101] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.183239] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.183391] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.183535] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.183773] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.183910] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.184051] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.184193] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.184439] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.184582] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.184719] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.184861] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.185005] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.185251] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.185584] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.185722] PCI: setting IRQ 11 as level-triggered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.185729] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.185968] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186141] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186279] PCI: setting IRQ 6 as level-triggered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186285] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186533] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186703] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186842] PCI: setting IRQ 10 as level-triggered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.186848] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187085] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187256] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187406] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187642] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187649] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187790] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.187804] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188042] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188045] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188048] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188051] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188054] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188058] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188061] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188064] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188067] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188070] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188073] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188077] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188080] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188083] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188086] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188089] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188092] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188095] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188098] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188101] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188104] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188107] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188110] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188136] NET: Registered protocol family 2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188332] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.188703] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.189705] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.190055] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.190195] TCP reno registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.190345] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.190490] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.190723] NET: Registered protocol family 1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.190961] RPC: Registered udp transport module. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191096] RPC: Registered tcp transport module. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191230] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191409] pci 0000:00:02.0: Boot video device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191433] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191435] pci 0000:00:1d.0: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191456] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191459] pci 0000:00:1d.1: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191479] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191481] pci 0000:00:1d.2: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191501] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191503] pci 0000:00:1d.3: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191566] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.191714] Simple Boot Flag at 0x36 set to 0x1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.192495] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.192677] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.192912] Scanning for low memory corruption every 60 seconds Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.193461] audit: initializing netlink socket (disabled) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.193611] type=2000 audit(1279041584.193:1): initialized Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.222260] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.225568] VFS: Disk quotas dquot_6.5.2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.225780] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.226839] msgmni has been set to 1762 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.227070] SELinux: Registering netfilter hooks Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.227238] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.228163] alg: No test for stdrng (krng) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.228497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.228730] io scheduler noop registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.228863] io scheduler deadline registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.229013] io scheduler cfq registered (default) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.229274] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.229475] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.229652] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.229830] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.230082] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.233946] Non-volatile memory driver v1.3 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.234114] intel_rng: FWH not detected Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.234248] Linux agpgart interface v0.103 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.234442] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.234886] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.237783] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.240175] ACPI: AC Adapter [ACAD] (on-line) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.240495] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.240777] ACPI: Lid Switch [LID] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.240987] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.241224] ACPI: Sleep Button [SLPB] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.244078] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.244332] ACPI: Power Button [PWRB] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.244561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.244796] ACPI: Power Button [PWRF] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.245360] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.245598] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.246242] Marking TSC unstable due to TSC halts in idle Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.246497] Switching to clocksource hpet Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.273030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.273220] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.273462] ACPI: Thermal Zone [TZ00] (61 C) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.283074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.283221] ACPI: Thermal Zone [TZ01] (61 C) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.283467] [drm] Initialized drm 1.1.0 20060810 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.283624] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.283858] i915 0000:00:02.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.286653] [drm] set up 7M of stolen space Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.390306] [drm] initialized overlay support Jul 13 17:20:02 OnlyTux-Poland kernel: [ 0.660073] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.123837] Console: switching to colour frame buffer device 160x50 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.129236] fb0: inteldrmfb frame buffer device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.129279] registered panic notifier Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.129321] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.129450] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.132107] brd: module loaded Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.133189] loop: module loaded Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.133575] ata_piix 0000:00:1f.2: version 2.13 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.133598] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.133681] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.284041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.284111] scsi0 : ata_piix Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.284274] scsi1 : ata_piix Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.285550] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.285618] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.286219] console [netcon0] enabled Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.286258] netconsole: network logging started Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.286362] usbcore: registered new interface driver libusual Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.286517] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288142] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288274] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288325] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288410] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288462] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288511] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.288747] mice: PS/2 mouse device common for all mice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.289336] rtc_cmos 00:07: RTC can wake from S4 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.289449] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.290685] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.291975] i2c /dev entries driver Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.293646] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.295272] cpuidle: using governor ladder Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.296783] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.298746] cpuidle: using governor menu Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.301503] usbcore: registered new interface driver hiddev Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.303275] usbcore: registered new interface driver usbhid Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.304824] usbhid: USB HID core driver Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.306694] GACT probability on Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.308288] Mirror/redirect action on Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.309914] Simple TC action Loaded Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.311787] netem: version 1.2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.313447] u32 classifier Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.315149] Performance counters on Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.316846] input device check on Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.318566] Actions configured Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.320301] Netfilter messages via NETLINK v0.30. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.322111] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.324105] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.325945] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.327777] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.329763] ctnetlink v0.93: registering with nfnetlink. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.331597] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.333448] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.335350] xt_time: kernel timezone is -0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.337765] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.339634] ClusterIP Version 0.8 loaded successfully Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.341503] arp_tables: (C) 2002 David S. Miller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.343366] TCP cubic registered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.345207] Initializing XFRM netlink socket Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.347067] NET: Registered protocol family 17 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.349106] PM: Resume from disk failed. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.349124] registered taskstats version 1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.351332] Magic number: 2:58:340 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.439551] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.441365] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.449513] ata1.00: configured for UDMA/100 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.451411] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.453584] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.455503] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.457519] sd 0:0:0:0: [sda] Write Protect is off Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.459457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.459564] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.461681] sda: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.478425] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.485261] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.523334] ata2.00: configured for UDMA/33 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.530892] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.534860] sda7 > Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.537587] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.545947] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.547893] Uniform CD-ROM driver Revision: 3.20 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.549966] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.550092] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.902351] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.934838] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.974881] kjournald starting. Commit interval 5 seconds Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.976972] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.979124] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.981265] Freeing unused kernel memory: 328k freed Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.983595] Write protecting the kernel text: 3496k Jul 13 17:20:02 OnlyTux-Poland kernel: [ 1.985800] Write protecting the kernel read-only data: 1696k Jul 13 17:20:02 OnlyTux-Poland kernel: [ 2.459053] async/0 used greatest stack depth: 6544 bytes left Jul 13 17:20:02 OnlyTux-Poland kernel: [ 3.286298] stty used greatest stack depth: 6364 bytes left Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.645142] udev: starting version 149 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867433] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867697] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867700] PCI: setting IRQ 5 as level-triggered Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867707] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867729] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867733] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867755] drivers/usb/core/inode.c: creating file 'devices' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867759] drivers/usb/core/inode.c: creating file '001' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867763] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867774] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867779] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867797] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867810] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.867816] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.871719] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.871721] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.907962] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.907970] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.911917] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917104] usb usb1: default language 0x0409 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917112] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917121] usb usb1: Product: EHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917123] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917126] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917256] usb usb1: usb_probe_device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917260] usb usb1: configuration #1 chosen from 1 choice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917269] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917334] hub 1-0:1.0: usb_probe_interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917337] hub 1-0:1.0: usb_probe_interface - got id Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917339] hub 1-0:1.0: USB hub found Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917345] hub 1-0:1.0: 8 ports detected Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917348] hub 1-0:1.0: standalone hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917350] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917352] hub 1-0:1.0: individual port over-current protection Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917355] hub 1-0:1.0: power on to power good time: 20ms Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917360] hub 1-0:1.0: local power source is good Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917362] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.917408] drivers/usb/core/inode.c: creating file '001' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.976774] sdhci: Secure Digital Host Controller Interface driver Jul 13 17:20:02 OnlyTux-Poland kernel: [ 4.976777] sdhci: Copyright(c) Pierre Ossman Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.007511] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.007526] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.007564] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.472619] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.472624] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525412] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525491] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525502] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525507] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525516] drivers/usb/core/inode.c: creating file '002' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525523] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525532] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525538] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525541] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525558] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525566] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525611] usb usb2: default language 0x0409 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525619] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525621] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525624] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525627] usb usb2: Product: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525630] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.525633] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526073] usb usb2: usb_probe_device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526079] usb usb2: configuration #1 chosen from 1 choice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526088] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526176] hub 2-0:1.0: usb_probe_interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526179] hub 2-0:1.0: usb_probe_interface - got id Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526181] hub 2-0:1.0: USB hub found Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526188] hub 2-0:1.0: 2 ports detected Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526190] hub 2-0:1.0: standalone hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526192] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526194] hub 2-0:1.0: individual port over-current protection Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526197] hub 2-0:1.0: power on to power good time: 2ms Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526202] hub 2-0:1.0: local power source is good Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526205] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526224] drivers/usb/core/inode.c: creating file '001' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526263] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526285] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526294] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526298] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526304] drivers/usb/core/inode.c: creating file '003' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526309] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526317] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526323] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526325] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526342] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526349] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526384] usb usb3: default language 0x0409 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526391] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526397] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526400] usb usb3: Product: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526402] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526405] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526778] usb usb3: usb_probe_device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526783] usb usb3: configuration #1 chosen from 1 choice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526791] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526875] hub 3-0:1.0: usb_probe_interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526878] hub 3-0:1.0: usb_probe_interface - got id Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526880] hub 3-0:1.0: USB hub found Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526886] hub 3-0:1.0: 2 ports detected Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526889] hub 3-0:1.0: standalone hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526890] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526893] hub 3-0:1.0: individual port over-current protection Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526895] hub 3-0:1.0: power on to power good time: 2ms Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526900] hub 3-0:1.0: local power source is good Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526902] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526920] drivers/usb/core/inode.c: creating file '001' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526960] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526980] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526989] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526993] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.526999] drivers/usb/core/inode.c: creating file '004' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527050] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527056] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527058] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527076] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527084] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527120] usb usb4: default language 0x0409 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527127] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527130] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527133] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527136] usb usb4: Product: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527139] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527141] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527253] usb usb4: usb_probe_device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527257] usb usb4: configuration #1 chosen from 1 choice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527264] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527326] hub 4-0:1.0: usb_probe_interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527329] hub 4-0:1.0: usb_probe_interface - got id Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527331] hub 4-0:1.0: USB hub found Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527336] hub 4-0:1.0: 2 ports detected Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527338] hub 4-0:1.0: standalone hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527340] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527343] hub 4-0:1.0: individual port over-current protection Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527345] hub 4-0:1.0: power on to power good time: 2ms Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527349] hub 4-0:1.0: local power source is good Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527352] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527369] drivers/usb/core/inode.c: creating file '001' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527402] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527419] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527427] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527431] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527437] drivers/usb/core/inode.c: creating file '005' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527441] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527450] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527456] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527458] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527474] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527481] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527515] usb usb5: default language 0x0409 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527522] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527524] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527527] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527530] usb usb5: Product: UHCI Host Controller Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527533] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527536] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527911] usb usb5: usb_probe_device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527915] usb usb5: configuration #1 chosen from 1 choice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.527924] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528039] hub 5-0:1.0: usb_probe_interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528042] hub 5-0:1.0: usb_probe_interface - got id Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528044] hub 5-0:1.0: USB hub found Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528050] hub 5-0:1.0: 2 ports detected Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528052] hub 5-0:1.0: standalone hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528054] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528056] hub 5-0:1.0: individual port over-current protection Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528059] hub 5-0:1.0: power on to power good time: 2ms Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528063] hub 5-0:1.0: local power source is good Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528066] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528083] drivers/usb/core/inode.c: creating file '001' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.528117] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.531025] ath: EEPROM regdomain: 0x65 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.531028] ath: EEPROM indicates we should expect a direct regpair map Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.531032] ath: Country alpha2 being used: 00 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.531034] ath: Regpair used: 0x65 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.533486] phy0: Selected rate control algorithm 'minstrel' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.533966] Registered led device: ath5k-phy0::rx Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.533982] Registered led device: ath5k-phy0::tx Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.533986] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.534126] modprobe used greatest stack depth: 6212 bytes left Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.556819] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.556827] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.556830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.584879] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.584893] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.584904] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.628034] uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.628039] hub 5-0:1.0: port 1: status 0301 change 0003 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.635039] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.635066] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.635072] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.635075] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.635079] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661443] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661460] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661472] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661572] Registered led device: mmc0:: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661636] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661656] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661671] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661678] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661843] Registered led device: mmc1:: Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.661985] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.730850] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.730865] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.823157] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.823163] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.823175] b44 0000:06:01.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.831073] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.831081] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.831089] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.832045] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.852137] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.852309] b44: b44.c:v2.0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.860700] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.973546] usb 5-1: skipped 1 descriptor after interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.978537] usb 5-1: default language 0x0409 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996539] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996543] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996546] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996549] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996552] usb 5-1: Manufacturer: Microsoft Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996644] usb 5-1: usb_probe_device Jul 13 17:20:02 OnlyTux-Poland kernel: [ 5.996649] usb 5-1: configuration #1 chosen from 1 choice Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.009543] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.009596] usbhid 5-1:1.0: usb_probe_interface Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.009599] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.023888] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.023973] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.024143] drivers/usb/core/inode.c: creating file '002' Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.114724] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.114731] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.114765] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.704059] usb usb2: suspend_rh (auto-stop) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.704089] usb usb3: suspend_rh (auto-stop) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 6.704116] usb usb4: suspend_rh (auto-stop) Jul 13 17:20:02 OnlyTux-Poland kernel: [ 7.407210] EXT3-fs (sda6): using internal journal Jul 13 17:20:02 OnlyTux-Poland kernel: [ 8.669801] kjournald starting. Commit interval 5 seconds Jul 13 17:20:02 OnlyTux-Poland kernel: [ 8.670056] EXT3-fs (sda7): using internal journal Jul 13 17:20:02 OnlyTux-Poland kernel: [ 8.670061] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 17:20:02 OnlyTux-Poland kernel: [ 8.707651] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 8.747185] NTFS volume version 3.1. Jul 13 17:20:02 OnlyTux-Poland kernel: [ 8.857504] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 17:20:03 OnlyTux-Poland acpid: starting up with proc fs Jul 13 17:20:03 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 17:20:03 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 17:20:03 OnlyTux-Poland acpid: 1 rule loaded Jul 13 17:20:03 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 17:20:03 OnlyTux-Poland rc-scripts: cpufreqd requires the kernel to be configured with CONFIG_CPU_FREQ Jul 13 17:20:03 OnlyTux-Poland rc-scripts: Make sure that the appropiate kernel drivers for your CPU are Jul 13 17:20:03 OnlyTux-Poland rc-scripts: built-in or loaded. Jul 13 17:20:03 OnlyTux-Poland /usr/sbin/gpm[3183]: *** info [daemon/startup.c(136)]: Jul 13 17:20:03 OnlyTux-Poland /usr/sbin/gpm[3183]: Started gpm successfully. Entered daemon mode. Jul 13 17:20:03 OnlyTux-Poland kernel: [ 19.206655] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:20:04 OnlyTux-Poland /usr/sbin/gpm[3183]: *** info [mice.c(1988)]: Jul 13 17:20:04 OnlyTux-Poland /usr/sbin/gpm[3183]: imps2: Auto-detected intellimouse PS/2 Jul 13 17:20:06 OnlyTux-Poland acpid: client connected from 3450[102:1002] Jul 13 17:20:06 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:20:07 OnlyTux-Poland dhcpcd[3970]: eth0: dhcpcd 4.0.15 starting Jul 13 17:20:07 OnlyTux-Poland dhcpcd[3970]: eth0: broadcasting for a lease Jul 13 17:20:11 OnlyTux-Poland kernel: [ 26.704226] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 17:20:11 OnlyTux-Poland kernel: [ 26.704230] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 17:20:11 OnlyTux-Poland dhcpcd[3970]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 17:20:11 OnlyTux-Poland dhcpcd[3970]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 17:20:11 OnlyTux-Poland dhcpcd[3970]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 17:20:17 OnlyTux-Poland dhcpcd[3970]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 17:20:18 OnlyTux-Poland cron[4182]: (CRON) STARTUP (V5.0) Jul 13 17:20:25 OnlyTux-Poland login[4250]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 13 17:20:25 OnlyTux-Poland login[4257]: ROOT LOGIN on '/dev/tty1' Jul 13 17:22:40 OnlyTux-Poland login[4251]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 13 17:22:40 OnlyTux-Poland login[6034]: ROOT LOGIN on '/dev/tty2' Jul 13 17:24:07 OnlyTux-Poland login[4251]: pam_unix(login:session): session closed for user root Jul 13 17:24:45 OnlyTux-Poland kernel: [ 300.743970] cc1 used greatest stack depth: 6200 bytes left Jul 13 17:24:59 OnlyTux-Poland kernel: [ 314.903654] cp used greatest stack depth: 6104 bytes left Jul 13 17:25:04 OnlyTux-Poland kernel: [ 319.758133] kjournald starting. Commit interval 5 seconds Jul 13 17:25:04 OnlyTux-Poland kernel: [ 319.769216] EXT3-fs (sda2): using internal journal Jul 13 17:25:04 OnlyTux-Poland kernel: [ 319.769220] EXT3-fs (sda2): mounted filesystem with writeback data mode Jul 13 17:25:13 OnlyTux-Poland shutdown[9435]: shutting down for system reboot Jul 13 17:25:15 OnlyTux-Poland init: Switching to runlevel: 6 Jul 13 17:25:18 OnlyTux-Poland dhcpcd[3977]: eth0: received SIGTERM, stopping Jul 13 17:25:19 OnlyTux-Poland kernel: [ 334.320573] b44 ssb0:0: eth0: powering down PHY Jul 13 17:25:20 OnlyTux-Poland kernel: [ 335.679964] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:25:21 OnlyTux-Poland acpid: exiting Jul 13 17:25:21 OnlyTux-Poland syslog-ng[2950]: Termination requested via signal, terminating; Jul 13 17:25:21 OnlyTux-Poland syslog-ng[2950]: syslog-ng shutting down; version='3.1.1' Jul 13 17:25:56 OnlyTux-Poland syslog-ng[2941]: syslog-ng starting up; version='3.1.1' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Tue Jul 13 17:24:38 CEST 2010 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558ac4, node_mem_map c165b300 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369da0 - 0xc1564ba4 (2027 kB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369da0 (3495 kB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.610 MHz processor. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.22 BogoMIPS (lpj=1728610) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.001287] Security Framework initialized Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.001426] SELinux: Initializing. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002008] SELinux: Starting in permissive mode Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002014] Mount-cache hash table entries: 512 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002251] Initializing cgroup subsys ns Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002388] Initializing cgroup subsys cpuacct Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002525] Initializing cgroup subsys freezer Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002660] Initializing cgroup subsys net_cls Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.002817] mce: CPU supports 6 MCE banks Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003010] using mwait in idle threads. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003150] Performance Events: Core events, core PMU driver. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003353] ... version: 1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003486] ... bit width: 40 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003621] ... generic registers: 2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003754] ... value mask: 000000ffffffffff Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.003891] ... max period: 000000007fffffff Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.004002] ... fixed-purpose events: 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.004137] ... event mask: 0000000000000003 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.004274] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.004481] Checking 'hlt' instruction... OK. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.008599] ACPI: Core revision 20100121 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.020901] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.022346] khelper used greatest stack depth: 7296 bytes left Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.023252] Time: 17:25:38 Date: 07/13/10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.023415] NET: Registered protocol family 16 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.024023] ACPI: bus type pci registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.024279] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.024517] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.024656] PCI: Using MMCONFIG for extended config space Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.024792] PCI: Using configuration type 1 for base access Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.025561] khelper used greatest stack depth: 7260 bytes left Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.030774] bio: create slab at 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.032273] ACPI: EC: Look up EC in DSDT Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.035962] ACPI: BIOS _OSI(Linux) query ignored Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.037044] ACPI: Interpreter enabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.037190] ACPI: (supports S0 S3 S4 S5) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.037470] ACPI: Using PIC for interrupt routing Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.088605] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.089341] ACPI: No dock devices found. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.090006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.090847] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092324] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092328] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092332] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092335] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092339] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092342] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092346] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092411] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092417] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092423] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092428] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092466] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092573] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092635] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092641] pci 0000:00:1b.0: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092737] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092743] pci 0000:00:1c.0: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092841] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092846] pci 0000:00:1c.1: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092945] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.092951] pci 0000:00:1c.2: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093062] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093067] pci 0000:00:1c.3: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093131] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093195] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093259] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093322] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093383] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093447] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093453] pci 0000:00:1d.7: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093615] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.093852] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094543] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094552] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094561] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094569] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094577] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094614] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094619] pci 0000:00:1f.2: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094680] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094774] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094914] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094920] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094929] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.094991] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095017] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095023] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095032] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095093] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095233] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095239] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095248] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095356] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095448] pci 0000:05:00.0: PME# supported from D3hot Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095455] pci 0000:05:00.0: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095482] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095622] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095628] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095637] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095699] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095755] pci 0000:06:01.0: supports D1 D2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095758] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095764] pci 0000:06:01.0: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095809] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095837] pci 0000:06:04.0: supports D1 D2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095840] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.095847] pci 0000:06:04.0: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096035] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096106] pci 0000:06:04.1: supports D1 D2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096108] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096114] pci 0000:06:04.1: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096157] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096228] pci 0000:06:04.2: supports D1 D2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096230] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096236] pci 0000:06:04.2: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096280] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096351] pci 0000:06:04.3: supports D1 D2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096354] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096360] pci 0000:06:04.3: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096404] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096475] pci 0000:06:04.4: supports D1 D2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096478] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096484] pci 0000:06:04.4: PME# disabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096549] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096693] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096698] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096707] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096711] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096718] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.096771] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097035] pci_bus 0000:00: on NUMA node 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.097877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.103394] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.103940] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.104487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.105097] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.105668] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.106366] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.106938] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.107511] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.108120] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.108362] vgaarb: loaded Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.108677] SCSI subsystem initialized Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.108842] libata version 3.00 loaded. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.109052] usbcore: registered new interface driver usbfs Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.109233] usbcore: registered new interface driver hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.109418] usbcore: registered new device driver usb Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.109804] PCI: Using ACPI for IRQ routing Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.109938] PCI: pci_cache_line_size set to 64 bytes Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110074] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110078] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110328] cfg80211: Calling CRDA to update world regulatory domain Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110513] NetLabel: Initializing Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110645] NetLabel: domain hash size = 128 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110779] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.110926] NetLabel: unlabeled traffic allowed by default Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.111102] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.111367] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.113016] Switching to clocksource tsc Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.115189] pnp: PnP ACPI init Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.115358] ACPI: bus type pnp registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.139320] pnp: PnP ACPI: found 10 devices Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.139454] ACPI: ACPI bus type pnp unregistered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.139601] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.139741] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.139881] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140022] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140162] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140329] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140474] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140617] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140756] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.140894] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.141033] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.141172] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.141321] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.176167] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.176418] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.176560] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.176793] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.176933] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.177167] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.177319] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.177553] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.177786] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.177925] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178063] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178203] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178353] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178493] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178631] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178773] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.178916] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.179154] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.179302] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.179443] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.179586] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.179825] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.179963] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.180105] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.180255] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.180490] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.180628] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.180771] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.180914] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.181156] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.181402] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.181543] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.181687] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.181926] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.182063] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.182202] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.182357] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.182595] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.182732] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.182875] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.183016] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.183261] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.183405] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.183543] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.183686] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.183829] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.184076] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.184413] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.184551] PCI: setting IRQ 11 as level-triggered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.184558] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.184796] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.184966] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185103] PCI: setting IRQ 6 as level-triggered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185109] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185358] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185529] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185666] PCI: setting IRQ 10 as level-triggered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185673] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.185909] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186079] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186217] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186466] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186473] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186615] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186629] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186867] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186871] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186874] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186877] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186880] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186884] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186887] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186890] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186893] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186896] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186900] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186903] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186906] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186909] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186913] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186916] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186919] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186922] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186925] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186928] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186931] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186934] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186937] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.186963] NET: Registered protocol family 2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.187146] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.187524] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.188533] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.188882] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.189021] TCP reno registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.189155] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.189314] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.189548] NET: Registered protocol family 1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.189788] RPC: Registered udp transport module. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.189923] RPC: Registered tcp transport module. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190057] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190207] pci 0000:00:02.0: Boot video device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190231] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190233] pci 0000:00:1d.0: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190282] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190284] pci 0000:00:1d.1: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190304] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190306] pci 0000:00:1d.2: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190326] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190329] pci 0000:00:1d.3: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190393] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.190537] Simple Boot Flag at 0x36 set to 0x1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.191318] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.191503] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.191739] Scanning for low memory corruption every 60 seconds Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.192294] audit: initializing netlink socket (disabled) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.192443] type=2000 audit(1279041938.192:1): initialized Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.224316] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.227598] VFS: Disk quotas dquot_6.5.2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.227810] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.228866] msgmni has been set to 1762 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.229098] SELinux: Registering netfilter hooks Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.229290] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.230192] alg: No test for stdrng (krng) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.230521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.230756] io scheduler noop registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.230889] io scheduler deadline registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.231039] io scheduler cfq registered (default) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.231324] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.231504] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.231686] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.231868] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.232115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.235970] Non-volatile memory driver v1.3 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.236139] intel_rng: FWH not detected Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.236324] Linux agpgart interface v0.103 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.236472] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.236921] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.239819] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.242280] ACPI: AC Adapter [ACAD] (on-line) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.242580] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.242860] ACPI: Lid Switch [LID] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.243072] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.243326] ACPI: Sleep Button [SLPB] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.246176] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.246430] ACPI: Power Button [PWRB] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.246660] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.246892] ACPI: Power Button [PWRF] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.247462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.247701] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.248371] Marking TSC unstable due to TSC halts in idle Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.248606] Switching to clocksource hpet Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.276030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.276221] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.276495] ACPI: Thermal Zone [TZ00] (58 C) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.287075] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.287220] ACPI: Thermal Zone [TZ01] (58 C) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.287465] [drm] Initialized drm 1.1.0 20060810 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.287620] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.287856] i915 0000:00:02.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.290646] [drm] set up 7M of stolen space Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.394310] [drm] initialized overlay support Jul 13 17:25:56 OnlyTux-Poland kernel: [ 0.664076] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.099831] Console: switching to colour frame buffer device 160x50 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.105229] fb0: inteldrmfb frame buffer device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.105272] registered panic notifier Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.105314] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.105440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.108079] brd: module loaded Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.109157] loop: module loaded Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.109538] ata_piix 0000:00:1f.2: version 2.13 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.109560] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.109642] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.260041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.260109] scsi0 : ata_piix Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.260274] scsi1 : ata_piix Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.261549] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.261617] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.262217] console [netcon0] enabled Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.262256] netconsole: network logging started Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.262361] usbcore: registered new interface driver libusual Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.262513] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266074] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266210] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266262] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266345] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266396] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266446] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.266676] mice: PS/2 mouse device common for all mice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.267260] rtc_cmos 00:07: RTC can wake from S4 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.267372] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.268608] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.269874] i2c /dev entries driver Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.271552] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.273167] cpuidle: using governor ladder Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.274670] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.276616] cpuidle: using governor menu Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.279394] usbcore: registered new interface driver hiddev Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.281192] usbcore: registered new interface driver usbhid Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.282736] usbhid: USB HID core driver Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.284619] GACT probability on Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.286212] Mirror/redirect action on Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.287837] Simple TC action Loaded Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.289713] netem: version 1.2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.291382] u32 classifier Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.293066] Performance counters on Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.294758] input device check on Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.296478] Actions configured Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.298210] Netfilter messages via NETLINK v0.30. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.300049] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.302067] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.303890] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.305727] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.307713] ctnetlink v0.93: registering with nfnetlink. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.309555] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.311416] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.313300] xt_time: kernel timezone is -0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.315703] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.317558] ClusterIP Version 0.8 loaded successfully Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.319435] arp_tables: (C) 2002 David S. Miller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.321302] TCP cubic registered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.323128] Initializing XFRM netlink socket Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.324970] NET: Registered protocol family 17 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.326903] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.328960] PM: Resume from disk failed. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.328978] registered taskstats version 1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.331236] Magic number: 2:161:441 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.333095] pcieport 0000:00:1c.2: hash matches Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.415553] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.417373] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.422515] ata1.00: configured for UDMA/100 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.424493] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.426763] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.428779] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.430863] sd 0:0:0:0: [sda] Write Protect is off Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.432837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.432884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.435153] sda: sda1 sda2 sda3 sda4 < Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.454426] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.474582] sda5 sda6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.499334] ata2.00: configured for UDMA/33 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.503302] sda7 > Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.505822] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.509972] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.522872] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.524853] Uniform CD-ROM driver Revision: 3.20 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.526965] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.527093] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.883060] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.915571] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.951809] kjournald starting. Commit interval 5 seconds Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.953950] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.956142] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.958319] Freeing unused kernel memory: 328k freed Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.960679] Write protecting the kernel text: 3496k Jul 13 17:25:56 OnlyTux-Poland kernel: [ 1.962923] Write protecting the kernel read-only data: 1704k Jul 13 17:25:56 OnlyTux-Poland kernel: [ 2.432050] async/0 used greatest stack depth: 6544 bytes left Jul 13 17:25:56 OnlyTux-Poland kernel: [ 3.241031] stty used greatest stack depth: 6364 bytes left Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.600150] udev: starting version 149 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.853922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.853926] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854209] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854212] PCI: setting IRQ 5 as level-triggered Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854219] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854239] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854243] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854263] drivers/usb/core/inode.c: creating file 'devices' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854268] drivers/usb/core/inode.c: creating file '001' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854272] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854283] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854288] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854304] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854317] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.854323] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.858213] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.858215] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.867794] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.867801] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.871697] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877044] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877105] usb usb1: default language 0x0409 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877113] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877122] usb usb1: Product: EHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877124] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877127] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877262] usb usb1: usb_probe_device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877266] usb usb1: configuration #1 chosen from 1 choice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877275] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877342] hub 1-0:1.0: usb_probe_interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877345] hub 1-0:1.0: usb_probe_interface - got id Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877347] hub 1-0:1.0: USB hub found Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877353] hub 1-0:1.0: 8 ports detected Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877356] hub 1-0:1.0: standalone hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877358] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877360] hub 1-0:1.0: individual port over-current protection Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877363] hub 1-0:1.0: power on to power good time: 20ms Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877368] hub 1-0:1.0: local power source is good Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877371] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.877411] drivers/usb/core/inode.c: creating file '001' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.977075] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.977081] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.984451] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.984456] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.984469] b44 0000:06:01.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.992071] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.992080] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 4.992087] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.004410] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.004418] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.004421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.011125] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.011301] b44: b44.c:v2.0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.020707] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.068303] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.068317] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.068355] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.533449] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.533461] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.533471] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.584799] ath: EEPROM regdomain: 0x65 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.584802] ath: EEPROM indicates we should expect a direct regpair map Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.584806] ath: Country alpha2 being used: 00 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.584808] ath: Regpair used: 0x65 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.585067] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.585093] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.588052] phy0: Selected rate control algorithm 'minstrel' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.588439] Registered led device: ath5k-phy0::rx Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.588455] Registered led device: ath5k-phy0::tx Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.588458] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600292] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600369] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600381] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600385] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600394] drivers/usb/core/inode.c: creating file '002' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600411] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600418] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600420] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600437] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600447] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600491] usb usb2: default language 0x0409 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600499] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600504] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600507] usb usb2: Product: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600510] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600513] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600645] usb usb2: usb_probe_device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600649] usb usb2: configuration #1 chosen from 1 choice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600657] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600719] hub 2-0:1.0: usb_probe_interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600722] hub 2-0:1.0: usb_probe_interface - got id Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600725] hub 2-0:1.0: USB hub found Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600731] hub 2-0:1.0: 2 ports detected Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600733] hub 2-0:1.0: standalone hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600735] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600737] hub 2-0:1.0: individual port over-current protection Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600740] hub 2-0:1.0: power on to power good time: 2ms Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600745] hub 2-0:1.0: local power source is good Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600748] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600769] drivers/usb/core/inode.c: creating file '001' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600805] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600825] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600834] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600838] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600844] drivers/usb/core/inode.c: creating file '003' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600848] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600857] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600863] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600865] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600881] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600887] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600923] usb usb3: default language 0x0409 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600930] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600933] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600936] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600939] usb usb3: Product: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600941] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.600944] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601323] usb usb3: usb_probe_device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601327] usb usb3: configuration #1 chosen from 1 choice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601335] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601413] hub 3-0:1.0: usb_probe_interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601416] hub 3-0:1.0: usb_probe_interface - got id Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601419] hub 3-0:1.0: USB hub found Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601424] hub 3-0:1.0: 2 ports detected Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601426] hub 3-0:1.0: standalone hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601428] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601430] hub 3-0:1.0: individual port over-current protection Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601433] hub 3-0:1.0: power on to power good time: 2ms Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601437] hub 3-0:1.0: local power source is good Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601440] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601459] drivers/usb/core/inode.c: creating file '001' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601496] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601517] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601526] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601530] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601536] drivers/usb/core/inode.c: creating file '004' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601541] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601549] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601555] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601557] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601574] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601582] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601619] usb usb4: default language 0x0409 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601627] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601630] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601633] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601636] usb usb4: Product: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601638] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601641] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601972] usb usb4: usb_probe_device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601976] usb usb4: configuration #1 chosen from 1 choice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.601984] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602101] hub 4-0:1.0: usb_probe_interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602104] hub 4-0:1.0: usb_probe_interface - got id Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602106] hub 4-0:1.0: USB hub found Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602112] hub 4-0:1.0: 2 ports detected Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602114] hub 4-0:1.0: standalone hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602116] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602118] hub 4-0:1.0: individual port over-current protection Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602121] hub 4-0:1.0: power on to power good time: 2ms Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602125] hub 4-0:1.0: local power source is good Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602128] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602144] drivers/usb/core/inode.c: creating file '001' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602180] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602201] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602210] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602214] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602219] drivers/usb/core/inode.c: creating file '005' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602224] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602232] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602237] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602240] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602257] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602265] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602298] usb usb5: default language 0x0409 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602306] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602309] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602315] usb usb5: Product: UHCI Host Controller Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602317] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602320] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602639] usb usb5: usb_probe_device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602643] usb usb5: configuration #1 chosen from 1 choice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602652] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602726] hub 5-0:1.0: usb_probe_interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602728] hub 5-0:1.0: usb_probe_interface - got id Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602731] hub 5-0:1.0: USB hub found Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602736] hub 5-0:1.0: 2 ports detected Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602738] hub 5-0:1.0: standalone hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602740] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602742] hub 5-0:1.0: individual port over-current protection Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602745] hub 5-0:1.0: power on to power good time: 2ms Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602749] hub 5-0:1.0: local power source is good Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602752] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602768] drivers/usb/core/inode.c: creating file '001' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.602804] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.619434] sdhci: Secure Digital Host Controller Interface driver Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.619437] sdhci: Copyright(c) Pierre Ossman Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.700162] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.701044] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.702047] uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.702051] hub 5-0:1.0: port 1: status 0301 change 0003 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.702067] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738139] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738157] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738169] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738271] Registered led device: mmc0:: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738336] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738360] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738376] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738384] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738563] Registered led device: mmc1:: Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.738711] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.802046] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.802060] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s Jul 13 17:25:56 OnlyTux-Poland kernel: [ 5.904053] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.045329] usb 5-1: skipped 1 descriptor after interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.050313] usb 5-1: default language 0x0409 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068314] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068317] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068320] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068323] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068325] usb 5-1: Manufacturer: Microsoft Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068412] usb 5-1: usb_probe_device Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.068416] usb 5-1: configuration #1 chosen from 1 choice Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.081313] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.081365] usbhid 5-1:1.0: usb_probe_interface Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.081368] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.095675] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.095761] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.095790] drivers/usb/core/inode.c: creating file '002' Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.095812] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.371789] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.371795] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.371826] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.601839] bash used greatest stack depth: 6332 bytes left Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.704049] usb usb2: suspend_rh (auto-stop) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.704078] usb usb3: suspend_rh (auto-stop) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 6.704103] usb usb4: suspend_rh (auto-stop) Jul 13 17:25:56 OnlyTux-Poland kernel: [ 7.275696] EXT3-fs (sda6): using internal journal Jul 13 17:25:56 OnlyTux-Poland kernel: [ 8.546724] kjournald starting. Commit interval 5 seconds Jul 13 17:25:56 OnlyTux-Poland kernel: [ 8.546973] EXT3-fs (sda7): using internal journal Jul 13 17:25:56 OnlyTux-Poland kernel: [ 8.546977] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 17:25:56 OnlyTux-Poland kernel: [ 8.566284] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 8.601856] NTFS volume version 3.1. Jul 13 17:25:56 OnlyTux-Poland kernel: [ 8.712226] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 17:25:56 OnlyTux-Poland kernel: [ 10.950267] find used greatest stack depth: 6268 bytes left Jul 13 17:25:57 OnlyTux-Poland acpid: starting up with proc fs Jul 13 17:25:57 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 17:25:57 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 17:25:57 OnlyTux-Poland acpid: 1 rule loaded Jul 13 17:25:57 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 17:25:57 OnlyTux-Poland acpid: client connected from 3119[0:0] Jul 13 17:25:57 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:25:58 OnlyTux-Poland /usr/sbin/gpm[3180]: *** info [daemon/startup.c(136)]: Jul 13 17:25:58 OnlyTux-Poland /usr/sbin/gpm[3180]: Started gpm successfully. Entered daemon mode. Jul 13 17:25:58 OnlyTux-Poland kernel: [ 19.750902] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 17:25:58 OnlyTux-Poland /usr/sbin/gpm[3180]: *** info [mice.c(1988)]: Jul 13 17:25:58 OnlyTux-Poland /usr/sbin/gpm[3180]: imps2: Auto-detected intellimouse PS/2 Jul 13 17:26:00 OnlyTux-Poland kernel: [ 22.279304] hald-probe-stor used greatest stack depth: 6180 bytes left Jul 13 17:26:00 OnlyTux-Poland acpid: client connected from 3447[102:1002] Jul 13 17:26:00 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:26:02 OnlyTux-Poland dhcpcd[3967]: eth0: dhcpcd 4.0.15 starting Jul 13 17:26:02 OnlyTux-Poland dhcpcd[3967]: eth0: broadcasting for a lease Jul 13 17:26:06 OnlyTux-Poland kernel: [ 27.704238] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 17:26:06 OnlyTux-Poland kernel: [ 27.704242] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 17:26:14 OnlyTux-Poland dhcpcd[3967]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 17:26:14 OnlyTux-Poland dhcpcd[3967]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 17:26:14 OnlyTux-Poland dhcpcd[3967]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 17:26:19 OnlyTux-Poland dhcpcd[3967]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 17:26:20 OnlyTux-Poland cron[4180]: (CRON) STARTUP (V5.0) Jul 13 17:27:57 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000001 Jul 13 17:30:01 OnlyTux-Poland cron[4256]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 17:40:01 OnlyTux-Poland cron[4268]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 17:50:01 OnlyTux-Poland cron[4281]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 17:57:46 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000002 Jul 13 17:57:52 OnlyTux-Poland login[4247]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 13 17:57:54 OnlyTux-Poland acpid: client connected from 4318[0:1000] Jul 13 17:57:54 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 17:58:20 OnlyTux-Poland kernel: [ 1962.252840] firefox used greatest stack depth: 6092 bytes left Jul 13 17:58:23 OnlyTux-Poland kernel: [ 1965.354852] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 13 17:59:01 OnlyTux-Poland cron[4444]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 18:00:01 OnlyTux-Poland cron[4450]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 18:10:01 OnlyTux-Poland cron[4515]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 18:13:44 OnlyTux-Poland kernel: [ 2886.374181] acroread used greatest stack depth: 5564 bytes left Jul 13 18:20:01 OnlyTux-Poland cron[4529]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 18:21:21 OnlyTux-Poland kernel: [ 3343.243538] firefox used greatest stack depth: 5516 bytes left Jul 13 18:21:28 OnlyTux-Poland kernel: [ 3350.587797] skype used greatest stack depth: 5436 bytes left Jul 13 18:21:28 OnlyTux-Poland shutdown[4548]: shutting down for system halt Jul 13 18:21:29 OnlyTux-Poland init: Switching to runlevel: 0 Jul 13 18:21:29 OnlyTux-Poland kernel: [ 3350.806579] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 18:21:29 OnlyTux-Poland kernel: [ 3350.937154] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 18:21:29 OnlyTux-Poland /usr/sbin/gpm[3180]: *** info [mice.c(1988)]: Jul 13 18:21:29 OnlyTux-Poland /usr/sbin/gpm[3180]: imps2: Auto-detected intellimouse PS/2 Jul 13 18:21:31 OnlyTux-Poland acpid: client 4318[0:1000] has disconnected Jul 13 18:21:31 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000003 Jul 13 18:21:33 OnlyTux-Poland dhcpcd[3975]: eth0: received SIGTERM, stopping Jul 13 18:21:33 OnlyTux-Poland kernel: [ 3354.993408] b44 ssb0:0: eth0: powering down PHY Jul 13 18:21:34 OnlyTux-Poland kernel: [ 3356.217474] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 18:21:35 OnlyTux-Poland acpid: exiting Jul 13 18:21:36 OnlyTux-Poland syslog-ng[2941]: Termination requested via signal, terminating; Jul 13 18:21:36 OnlyTux-Poland syslog-ng[2941]: syslog-ng shutting down; version='3.1.1' Jul 13 20:04:59 OnlyTux-Poland syslog-ng[2947]: syslog-ng starting up; version='3.1.1' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Tue Jul 13 17:24:38 CEST 2010 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558ac4, node_mem_map c165b300 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369da0 - 0xc1564ba4 (2027 kB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369da0 (3495 kB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.932 MHz processor. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.86 BogoMIPS (lpj=1728932) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.001292] Security Framework initialized Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.001432] SELinux: Initializing. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.001570] SELinux: Starting in permissive mode Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.001577] Mount-cache hash table entries: 512 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.002105] Initializing cgroup subsys ns Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.002245] Initializing cgroup subsys cpuacct Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.002382] Initializing cgroup subsys freezer Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.002518] Initializing cgroup subsys net_cls Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.002677] mce: CPU supports 6 MCE banks Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.002818] using mwait in idle threads. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003009] Performance Events: Core events, core PMU driver. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003214] ... version: 1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003349] ... bit width: 40 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003484] ... generic registers: 2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003620] ... value mask: 000000ffffffffff Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003756] ... max period: 000000007fffffff Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.003893] ... fixed-purpose events: 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.004002] ... event mask: 0000000000000003 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.004140] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.004347] Checking 'hlt' instruction... OK. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.008599] ACPI: Core revision 20100121 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.020912] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.022349] khelper used greatest stack depth: 7296 bytes left Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.022738] Time: 20:04:41 Date: 07/13/10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.023038] NET: Registered protocol family 16 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.023560] ACPI: bus type pci registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.023818] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.024013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.024154] PCI: Using MMCONFIG for extended config space Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.024291] PCI: Using configuration type 1 for base access Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.024718] khelper used greatest stack depth: 7260 bytes left Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.030490] bio: create slab at 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.031877] ACPI: EC: Look up EC in DSDT Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.035647] ACPI: BIOS _OSI(Linux) query ignored Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.036721] ACPI: Interpreter enabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.036868] ACPI: (supports S0 S3 S4 S5) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.037130] ACPI: Using PIC for interrupt routing Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.088602] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.089335] ACPI: No dock devices found. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.090006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.090844] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092368] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092372] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092375] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092379] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092382] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092386] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092390] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092455] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092461] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092467] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092472] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092510] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092617] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092679] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092684] pci 0000:00:1b.0: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092780] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092786] pci 0000:00:1c.0: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092883] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092888] pci 0000:00:1c.1: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092986] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.092991] pci 0000:00:1c.2: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093101] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093106] pci 0000:00:1c.3: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093169] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093232] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093296] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093359] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093420] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093483] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093489] pci 0000:00:1d.7: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093651] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.093890] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094545] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094554] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094562] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094571] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094579] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094615] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094621] pci 0000:00:1f.2: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094681] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094775] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094915] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094921] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.094930] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095053] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095193] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095199] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095208] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095270] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095409] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095415] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095424] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095531] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095623] pci 0000:05:00.0: PME# supported from D3hot Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095629] pci 0000:05:00.0: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095657] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095797] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095803] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095812] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095874] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095931] pci 0000:06:01.0: supports D1 D2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095934] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095939] pci 0000:06:01.0: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.095983] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096023] pci 0000:06:04.0: supports D1 D2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096026] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096032] pci 0000:06:04.0: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096075] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096146] pci 0000:06:04.1: supports D1 D2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096149] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096155] pci 0000:06:04.1: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096198] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096269] pci 0000:06:04.2: supports D1 D2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096272] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096278] pci 0000:06:04.2: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096321] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096392] pci 0000:06:04.3: supports D1 D2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096394] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096400] pci 0000:06:04.3: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096444] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096515] pci 0000:06:04.4: supports D1 D2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096518] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096524] pci 0000:06:04.4: PME# disabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096589] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096733] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096739] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096748] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096751] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096758] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.096812] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097035] pci_bus 0000:00: on NUMA node 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.097875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.103416] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.103964] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.104526] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.105112] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.105683] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.106401] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.106970] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.107512] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.108149] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.108392] vgaarb: loaded Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.108707] SCSI subsystem initialized Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.108873] libata version 3.00 loaded. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.109081] usbcore: registered new interface driver usbfs Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.109263] usbcore: registered new interface driver hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.109448] usbcore: registered new device driver usb Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.109837] PCI: Using ACPI for IRQ routing Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.109973] PCI: pci_cache_line_size set to 64 bytes Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110107] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110111] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110358] cfg80211: Calling CRDA to update world regulatory domain Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110544] NetLabel: Initializing Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110676] NetLabel: domain hash size = 128 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110811] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.110959] NetLabel: unlabeled traffic allowed by default Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.111104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.111372] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.113016] Switching to clocksource tsc Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.115186] pnp: PnP ACPI init Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.115358] ACPI: bus type pnp registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.139259] pnp: PnP ACPI: found 10 devices Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.139394] ACPI: ACPI bus type pnp unregistered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.139541] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.139683] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.139824] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.139964] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140105] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140257] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140401] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140545] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140684] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140823] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.140962] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.141101] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.141252] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.176095] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.176344] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.176487] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.176722] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.176863] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.177099] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.177250] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.177485] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.177720] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.177859] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.177999] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.178139] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.178290] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.178430] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.178568] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.178711] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.178856] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.179095] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.179243] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.179388] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.179530] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.179771] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.179911] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.180055] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.180208] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.180449] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.180588] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.180731] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.180876] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.181116] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.181362] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.181504] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.181651] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.181891] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182030] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182171] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182326] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182566] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182704] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182847] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.182991] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.183237] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.183381] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.183520] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.183664] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.183809] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.184055] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.184387] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.184526] PCI: setting IRQ 11 as level-triggered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.184533] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.184774] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.184946] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185084] PCI: setting IRQ 6 as level-triggered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185090] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185341] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185512] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185651] PCI: setting IRQ 10 as level-triggered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185658] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.185897] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186065] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186219] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186456] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186463] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186606] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186620] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186861] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186864] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186868] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186871] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186874] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186877] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186880] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186884] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186887] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186890] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186893] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186897] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186900] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186903] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186906] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186909] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186912] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186916] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186919] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186922] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186925] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186928] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186931] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.186956] NET: Registered protocol family 2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.187137] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.187519] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.188528] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.188878] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.189018] TCP reno registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.189152] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.189313] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.189542] NET: Registered protocol family 1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.189786] RPC: Registered udp transport module. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.189924] RPC: Registered tcp transport module. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190060] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190239] pci 0000:00:02.0: Boot video device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190262] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190264] pci 0000:00:1d.0: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190285] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190287] pci 0000:00:1d.1: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190308] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190310] pci 0000:00:1d.2: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190330] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190332] pci 0000:00:1d.3: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190395] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.190538] Simple Boot Flag at 0x36 set to 0x1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.191317] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.191499] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.191738] Scanning for low memory corruption every 60 seconds Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.192298] audit: initializing netlink socket (disabled) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.192449] type=2000 audit(1279051481.192:1): initialized Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.224313] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.227653] VFS: Disk quotas dquot_6.5.2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.227870] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.228893] msgmni has been set to 1762 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.229128] SELinux: Registering netfilter hooks Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.229333] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.230277] alg: No test for stdrng (krng) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.230566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.230801] io scheduler noop registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.230933] io scheduler deadline registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.231079] io scheduler cfq registered (default) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.231364] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.231544] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.231718] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.231890] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.232128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.235946] Non-volatile memory driver v1.3 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.236115] intel_rng: FWH not detected Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.236270] Linux agpgart interface v0.103 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.236418] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.236876] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.239744] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.242320] ACPI: AC Adapter [ACAD] (on-line) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.242622] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.242905] ACPI: Lid Switch [LID] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.243119] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.243375] ACPI: Sleep Button [SLPB] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.246269] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.246506] ACPI: Power Button [PWRB] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.246734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.246969] ACPI: Power Button [PWRF] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.247533] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.247768] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.248437] Marking TSC unstable due to TSC halts in idle Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.248671] Switching to clocksource hpet Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.276030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.276221] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.276431] ACPI: Thermal Zone [TZ00] (37 C) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.286073] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.286221] ACPI: Thermal Zone [TZ01] (37 C) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.286467] [drm] Initialized drm 1.1.0 20060810 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.286623] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.286862] i915 0000:00:02.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.289644] [drm] set up 7M of stolen space Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.393310] [drm] initialized overlay support Jul 13 20:04:59 OnlyTux-Poland kernel: [ 0.663076] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.086830] Console: switching to colour frame buffer device 160x50 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.092227] fb0: inteldrmfb frame buffer device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.092270] registered panic notifier Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.092312] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.092437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.095067] brd: module loaded Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.096144] loop: module loaded Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.096517] ata_piix 0000:00:1f.2: version 2.13 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.096540] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.096623] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.247040] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.247108] scsi0 : ata_piix Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.247267] scsi1 : ata_piix Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.248538] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.248606] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.249209] console [netcon0] enabled Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.249247] netconsole: network logging started Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.249350] usbcore: registered new interface driver libusual Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.249503] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251168] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251300] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251351] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251434] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251485] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251534] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.251765] mice: PS/2 mouse device common for all mice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.252345] rtc_cmos 00:07: RTC can wake from S4 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.252453] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.253686] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.254957] i2c /dev entries driver Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.256620] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.258244] cpuidle: using governor ladder Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.259745] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.261705] cpuidle: using governor menu Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.264458] usbcore: registered new interface driver hiddev Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.266244] usbcore: registered new interface driver usbhid Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.267791] usbhid: USB HID core driver Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.269656] GACT probability on Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.271246] Mirror/redirect action on Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.272867] Simple TC action Loaded Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.274729] netem: version 1.2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.276385] u32 classifier Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.278080] Performance counters on Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.279775] input device check on Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.281492] Actions configured Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.283222] Netfilter messages via NETLINK v0.30. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.285056] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.287046] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.288883] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.290717] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.292701] ctnetlink v0.93: registering with nfnetlink. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.294536] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.296391] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.298273] xt_time: kernel timezone is -0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.300678] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.302526] ClusterIP Version 0.8 loaded successfully Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.304399] arp_tables: (C) 2002 David S. Miller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.306263] TCP cubic registered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.308109] Initializing XFRM netlink socket Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.309954] NET: Registered protocol family 17 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.311886] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.313925] PM: Resume from disk failed. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.313943] registered taskstats version 1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.316194] Magic number: 2:617:93 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.402552] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.404388] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.409514] ata1.00: configured for UDMA/100 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.411463] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.413704] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.415693] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.417771] sd 0:0:0:0: [sda] Write Protect is off Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.419747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.419794] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.421952] sda: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.425419] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.436871] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.470332] ata2.00: configured for UDMA/33 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.475370] sda7 > Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.478066] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.481265] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.493861] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.495826] Uniform CD-ROM driver Revision: 3.20 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.497952] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.498076] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.866900] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.899536] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.937613] kjournald starting. Commit interval 5 seconds Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.939733] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.941896] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.944069] Freeing unused kernel memory: 328k freed Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.946419] Write protecting the kernel text: 3496k Jul 13 20:04:59 OnlyTux-Poland kernel: [ 1.948637] Write protecting the kernel read-only data: 1704k Jul 13 20:04:59 OnlyTux-Poland kernel: [ 2.419055] async/0 used greatest stack depth: 6544 bytes left Jul 13 20:04:59 OnlyTux-Poland kernel: [ 3.271286] stty used greatest stack depth: 6364 bytes left Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.630139] udev: starting version 149 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.767087] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.767095] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.767099] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931100] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931358] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931362] PCI: setting IRQ 5 as level-triggered Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931369] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931388] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931392] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931414] drivers/usb/core/inode.c: creating file 'devices' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931418] drivers/usb/core/inode.c: creating file '001' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931423] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931433] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931438] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931454] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931467] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.931472] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.935350] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.935352] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.935638] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.935644] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.939529] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945095] usb usb1: default language 0x0409 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945103] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945112] usb usb1: Product: EHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945115] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945118] usb usb1: SerialNumber: 0000:00:1d.7 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945244] usb usb1: usb_probe_device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945248] usb usb1: configuration #1 chosen from 1 choice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945257] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945319] hub 1-0:1.0: usb_probe_interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945322] hub 1-0:1.0: usb_probe_interface - got id Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945325] hub 1-0:1.0: USB hub found Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945331] hub 1-0:1.0: 8 ports detected Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945335] hub 1-0:1.0: standalone hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945337] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945340] hub 1-0:1.0: individual port over-current protection Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945343] hub 1-0:1.0: power on to power good time: 20ms Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945347] hub 1-0:1.0: local power source is good Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945350] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.945390] drivers/usb/core/inode.c: creating file '001' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.981415] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.981421] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.981433] b44 0000:06:01.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.985928] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.985999] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986039] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986043] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986053] drivers/usb/core/inode.c: creating file '002' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986070] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986076] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986078] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986096] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986105] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986149] usb usb2: default language 0x0409 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986157] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986166] usb usb2: Product: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986169] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986171] usb usb2: SerialNumber: 0000:00:1d.0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986586] usb usb2: usb_probe_device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986591] usb usb2: configuration #1 chosen from 1 choice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986602] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986686] hub 2-0:1.0: usb_probe_interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986689] hub 2-0:1.0: usb_probe_interface - got id Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986691] hub 2-0:1.0: USB hub found Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986697] hub 2-0:1.0: 2 ports detected Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986699] hub 2-0:1.0: standalone hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986701] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986704] hub 2-0:1.0: individual port over-current protection Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986707] hub 2-0:1.0: power on to power good time: 2ms Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986711] hub 2-0:1.0: local power source is good Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986715] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986733] drivers/usb/core/inode.c: creating file '001' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986772] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986794] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986803] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986807] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986813] drivers/usb/core/inode.c: creating file '003' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986818] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986826] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986831] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986834] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986851] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986859] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986894] usb usb3: default language 0x0409 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986901] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986904] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986907] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986910] usb usb3: Product: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986912] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.986915] usb usb3: SerialNumber: 0000:00:1d.1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987292] usb usb3: usb_probe_device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987296] usb usb3: configuration #1 chosen from 1 choice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987305] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987385] hub 3-0:1.0: usb_probe_interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987388] hub 3-0:1.0: usb_probe_interface - got id Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987391] hub 3-0:1.0: USB hub found Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987397] hub 3-0:1.0: 2 ports detected Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987399] hub 3-0:1.0: standalone hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987401] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987403] hub 3-0:1.0: individual port over-current protection Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987406] hub 3-0:1.0: power on to power good time: 2ms Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987410] hub 3-0:1.0: local power source is good Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987413] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987430] drivers/usb/core/inode.c: creating file '001' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987467] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987487] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987496] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987500] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987506] drivers/usb/core/inode.c: creating file '004' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987519] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987525] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987528] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987545] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987554] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987595] usb usb4: default language 0x0409 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987602] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987608] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987611] usb usb4: Product: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987614] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987617] usb usb4: SerialNumber: 0000:00:1d.2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987721] usb usb4: usb_probe_device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987724] usb usb4: configuration #1 chosen from 1 choice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987731] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987791] hub 4-0:1.0: usb_probe_interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987794] hub 4-0:1.0: usb_probe_interface - got id Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987796] hub 4-0:1.0: USB hub found Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987801] hub 4-0:1.0: 2 ports detected Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987803] hub 4-0:1.0: standalone hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987805] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987807] hub 4-0:1.0: individual port over-current protection Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987810] hub 4-0:1.0: power on to power good time: 2ms Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987814] hub 4-0:1.0: local power source is good Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987817] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987832] drivers/usb/core/inode.c: creating file '001' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987864] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987884] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987892] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987896] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987902] drivers/usb/core/inode.c: creating file '005' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987906] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987915] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987920] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987922] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987939] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987945] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987979] usb usb5: default language 0x0409 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987987] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987989] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987992] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987995] usb usb5: Product: UHCI Host Controller Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.987998] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988001] usb usb5: SerialNumber: 0000:00:1d.3 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988372] usb usb5: usb_probe_device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988376] usb usb5: configuration #1 chosen from 1 choice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988384] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988467] hub 5-0:1.0: usb_probe_interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988470] hub 5-0:1.0: usb_probe_interface - got id Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988472] hub 5-0:1.0: USB hub found Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988477] hub 5-0:1.0: 2 ports detected Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988480] hub 5-0:1.0: standalone hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988482] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988484] hub 5-0:1.0: individual port over-current protection Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988486] hub 5-0:1.0: power on to power good time: 2ms Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988490] hub 5-0:1.0: local power source is good Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988493] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988509] drivers/usb/core/inode.c: creating file '001' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.988543] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.995066] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.995075] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 4.995083] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.034553] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.034787] b44: b44.c:v2.0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.042763] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.045070] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.045076] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.086060] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.087054] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.087057] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.088035] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.145061] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.145074] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.145085] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.186790] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.186803] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.186841] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.652369] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.652398] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.652404] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.653045] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.653055] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.653063] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.718211] ath: EEPROM regdomain: 0x65 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.718215] ath: EEPROM indicates we should expect a direct regpair map Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.718219] ath: Country alpha2 being used: 00 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.718221] ath: Regpair used: 0x65 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.720620] phy0: Selected rate control algorithm 'minstrel' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.721000] Registered led device: ath5k-phy0::rx Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.721051] Registered led device: ath5k-phy0::tx Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.721055] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.789056] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.827660] sdhci: Secure Digital Host Controller Interface driver Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.827663] sdhci: Copyright(c) Pierre Ossman Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890097] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890114] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890126] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890225] Registered led device: mmc0:: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890288] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890308] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890322] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890330] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890502] Registered led device: mmc1:: Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.890646] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.891060] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.977814] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.977820] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 5.977855] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.035996] usb 5-1: skipped 1 descriptor after interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.040977] usb 5-1: default language 0x0409 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.058982] usb 5-1: udev 2, busnum 5, minor = 513 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.058985] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.058988] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.058991] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.058994] usb 5-1: Manufacturer: Microsoft Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.059105] usb 5-1: usb_probe_device Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.059109] usb 5-1: configuration #1 chosen from 1 choice Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.071993] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.072071] usbhid 5-1:1.0: usb_probe_interface Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.072074] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.086439] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.086627] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.086659] drivers/usb/core/inode.c: creating file '002' Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.204034] usb usb2: suspend_rh (auto-stop) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.204062] usb usb3: suspend_rh (auto-stop) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.204089] usb usb4: suspend_rh (auto-stop) Jul 13 20:04:59 OnlyTux-Poland kernel: [ 6.214245] modprobe used greatest stack depth: 6072 bytes left Jul 13 20:04:59 OnlyTux-Poland kernel: [ 7.428112] EXT3-fs (sda6): using internal journal Jul 13 20:04:59 OnlyTux-Poland kernel: [ 8.743637] kjournald starting. Commit interval 5 seconds Jul 13 20:04:59 OnlyTux-Poland kernel: [ 8.743884] EXT3-fs (sda7): using internal journal Jul 13 20:04:59 OnlyTux-Poland kernel: [ 8.743889] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 20:04:59 OnlyTux-Poland kernel: [ 8.763186] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 8.809892] NTFS volume version 3.1. Jul 13 20:04:59 OnlyTux-Poland kernel: [ 8.920243] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 20:05:00 OnlyTux-Poland acpid: starting up with proc fs Jul 13 20:05:00 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 20:05:00 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 20:05:00 OnlyTux-Poland acpid: 1 rule loaded Jul 13 20:05:00 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 20:05:00 OnlyTux-Poland acpid: client connected from 3125[0:0] Jul 13 20:05:00 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 20:05:01 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [daemon/startup.c(136)]: Jul 13 20:05:01 OnlyTux-Poland /usr/sbin/gpm[3186]: Started gpm successfully. Entered daemon mode. Jul 13 20:05:01 OnlyTux-Poland kernel: [ 19.166091] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 20:05:01 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [mice.c(1988)]: Jul 13 20:05:01 OnlyTux-Poland /usr/sbin/gpm[3186]: imps2: Auto-detected intellimouse PS/2 Jul 13 20:05:03 OnlyTux-Poland acpid: client connected from 3453[102:1002] Jul 13 20:05:03 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 20:05:04 OnlyTux-Poland dhcpcd[3973]: eth0: dhcpcd 4.0.15 starting Jul 13 20:05:04 OnlyTux-Poland dhcpcd[3973]: eth0: broadcasting for a lease Jul 13 20:05:08 OnlyTux-Poland kernel: [ 26.704228] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 20:05:08 OnlyTux-Poland kernel: [ 26.704232] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 20:05:09 OnlyTux-Poland dhcpcd[3973]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 20:05:09 OnlyTux-Poland dhcpcd[3973]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 20:05:09 OnlyTux-Poland dhcpcd[3973]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 20:05:15 OnlyTux-Poland dhcpcd[3973]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 20:05:16 OnlyTux-Poland cron[4185]: (CRON) STARTUP (V5.0) Jul 13 20:05:21 OnlyTux-Poland login[4252]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 13 20:05:26 OnlyTux-Poland acpid: client connected from 4281[0:1000] Jul 13 20:05:26 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 20:05:51 OnlyTux-Poland kernel: [ 69.526325] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 13 20:06:12 OnlyTux-Poland su[4354]: Successful su for root by onlyus Jul 13 20:06:12 OnlyTux-Poland su[4354]: + /dev/pts/0 onlyus:root Jul 13 20:06:12 OnlyTux-Poland su[4354]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 20:06:22 OnlyTux-Poland su[4354]: pam_unix(su:session): session closed for user root Jul 13 20:10:01 OnlyTux-Poland cron[4372]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 20:20:01 OnlyTux-Poland cron[4481]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 20:24:21 OnlyTux-Poland kernel: [ 1179.227290] firefox used greatest stack depth: 5656 bytes left Jul 13 20:30:01 OnlyTux-Poland cron[4524]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 20:32:48 OnlyTux-Poland su[4560]: Successful su for root by onlyus Jul 13 20:32:48 OnlyTux-Poland su[4560]: + /dev/pts/1 onlyus:root Jul 13 20:32:48 OnlyTux-Poland su[4560]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 13 20:35:16 OnlyTux-Poland su[4560]: pam_unix(su:session): session closed for user root Jul 13 20:37:46 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000001 Jul 13 20:40:01 OnlyTux-Poland cron[4817]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 20:50:01 OnlyTux-Poland cron[4841]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 20:57:48 OnlyTux-Poland kernel: [ 3186.808053] xmatrix used greatest stack depth: 5436 bytes left Jul 13 20:59:01 OnlyTux-Poland cron[4854]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 21:00:01 OnlyTux-Poland cron[4856]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 21:10:01 OnlyTux-Poland cron[4870]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 21:20:01 OnlyTux-Poland cron[4884]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 21:22:00 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000002 Jul 13 21:30:01 OnlyTux-Poland cron[4970]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 21:40:01 OnlyTux-Poland cron[5007]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 21:41:54 OnlyTux-Poland kernel: [ 5832.199976] firefox used greatest stack depth: 5368 bytes left Jul 13 21:42:00 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000003 Jul 13 21:50:01 OnlyTux-Poland cron[5030]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 21:59:01 OnlyTux-Poland cron[5044]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 13 22:00:01 OnlyTux-Poland cron[5046]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 22:10:01 OnlyTux-Poland cron[5066]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 13 22:17:24 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000004 Jul 13 22:17:58 OnlyTux-Poland kernel: [ 7996.186058] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jul 13 22:17:58 OnlyTux-Poland kernel: [ 7996.186204] render error detected, EIR: 0x00000000 Jul 13 22:17:58 OnlyTux-Poland kernel: [ 7996.202552] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 13 22:17:58 OnlyTux-Poland kernel: [ 7997.096366] X used greatest stack depth: 5324 bytes left Jul 13 22:18:54 OnlyTux-Poland acpid: client 4281[0:1000] has disconnected Jul 13 22:18:54 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000005 Jul 13 22:18:55 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000006 Jul 13 22:18:55 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000007 Jul 13 22:18:55 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000008 Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250101] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250112] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250124] hub 5-0:1.0: port 1, status 0100, change 0003, 12 Mb/s Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250128] usb 5-1: USB disconnect, address 2 Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250130] usb 5-1: unregistering device Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250133] usb 5-1: usb_disable_device nuking all URBs Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.250139] usb 5-1: unregistering interface 5-1:1.0 Jul 13 22:18:58 OnlyTux-Poland kernel: [ 8056.354073] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.458054] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.458067] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.458076] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.500065] usb usb5: suspend_rh (auto-stop) Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.562067] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.562078] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.562109] usb usb5: wakeup_rh (auto-start) Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.613069] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.613094] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.613103] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.613110] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.717069] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.819067] usb 5-1: new low speed USB device using uhci_hcd and address 3 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.960152] usb 5-1: skipped 1 descriptor after interface Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.965151] usb 5-1: default language 0x0409 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983150] usb 5-1: udev 3, busnum 5, minor = 514 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983153] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983156] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983159] usb 5-1: Product: Compact Optical Mouse 500 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983162] usb 5-1: Manufacturer: Microsoft Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983262] usb 5-1: usb_probe_device Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.983266] usb 5-1: configuration #1 chosen from 1 choice Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.996148] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.996203] usbhid 5-1:1.0: usb_probe_interface Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8057.996207] usbhid 5-1:1.0: usb_probe_interface - got id Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8058.010742] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8058.010936] generic-usb 0003:045E:0737.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8058.010971] drivers/usb/core/inode.c: creating file '003' Jul 13 22:18:59 OnlyTux-Poland kernel: [ 8058.010993] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 22:19:00 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000009 Jul 13 22:19:01 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 0000000a Jul 13 22:20:28 OnlyTux-Poland syslog-ng[2973]: syslog-ng starting up; version='3.1.1' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Tue Jul 13 17:24:38 CEST 2010 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558ac4, node_mem_map c165b300 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369da0 - 0xc1564ba4 (2027 kB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369da0 (3495 kB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.750 MHz processor. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.50 BogoMIPS (lpj=1728750) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002014] Security Framework initialized Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002152] SELinux: Initializing. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002291] SELinux: Starting in permissive mode Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002297] Mount-cache hash table entries: 512 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002536] Initializing cgroup subsys ns Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002674] Initializing cgroup subsys cpuacct Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.002811] Initializing cgroup subsys freezer Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003004] Initializing cgroup subsys net_cls Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003160] mce: CPU supports 6 MCE banks Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003302] using mwait in idle threads. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003444] Performance Events: Core events, core PMU driver. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003648] ... version: 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003782] ... bit width: 40 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.003917] ... generic registers: 2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.004003] ... value mask: 000000ffffffffff Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.004140] ... max period: 000000007fffffff Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.004278] ... fixed-purpose events: 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.004414] ... event mask: 0000000000000003 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.004554] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.004764] Checking 'hlt' instruction... OK. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.008596] ACPI: Core revision 20100121 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.020909] ACPI: setting ELCR to 0200 (from 0c60) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.022350] khelper used greatest stack depth: 7296 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.022736] Time: 22:20:04 Date: 07/13/10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.022902] NET: Registered protocol family 16 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.023394] ACPI: bus type pci registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.023652] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.024013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.024153] PCI: Using MMCONFIG for extended config space Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.024291] PCI: Using configuration type 1 for base access Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.024719] khelper used greatest stack depth: 7260 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.030320] bio: create slab at 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.031704] ACPI: EC: Look up EC in DSDT Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.035436] ACPI: BIOS _OSI(Linux) query ignored Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.036413] ACPI: Interpreter enabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.036560] ACPI: (supports S0 S3 S4 S5) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.036842] ACPI: Using PIC for interrupt routing Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.089584] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.090312] ACPI: No dock devices found. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.091006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.091845] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093327] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093331] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093335] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093338] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093342] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093345] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093349] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093415] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093421] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093426] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093432] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093470] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093577] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093638] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093644] pci 0000:00:1b.0: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093740] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093746] pci 0000:00:1c.0: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093844] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093850] pci 0000:00:1c.1: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093948] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.093954] pci 0000:00:1c.2: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094065] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094070] pci 0000:00:1c.3: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094133] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094197] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094261] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094324] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094385] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094448] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094454] pci 0000:00:1d.7: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094617] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.094856] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095544] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095553] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095561] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095570] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095578] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095614] pci 0000:00:1f.2: PME# supported from D3hot Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095620] pci 0000:00:1f.2: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095680] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095775] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095915] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095921] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.095930] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096018] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096158] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096164] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096172] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096234] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096374] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096381] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096390] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096498] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096591] pci 0000:05:00.0: PME# supported from D3hot Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096597] pci 0000:05:00.0: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096625] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096765] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096771] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096780] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096842] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096899] pci 0000:06:01.0: supports D1 D2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096902] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096907] pci 0000:06:01.0: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096952] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096981] pci 0000:06:04.0: supports D1 D2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096984] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.096990] pci 0000:06:04.0: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097044] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097115] pci 0000:06:04.1: supports D1 D2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097118] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097124] pci 0000:06:04.1: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097167] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097237] pci 0000:06:04.2: supports D1 D2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097240] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097246] pci 0000:06:04.2: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097289] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097359] pci 0000:06:04.3: supports D1 D2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097362] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097368] pci 0000:06:04.3: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097412] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097482] pci 0000:06:04.4: supports D1 D2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097485] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097491] pci 0000:06:04.4: PME# disabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097556] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097701] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097707] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097716] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097719] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097726] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.097780] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098035] pci_bus 0000:00: on NUMA node 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.098874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.104371] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.104917] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.105489] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.106077] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.106649] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.107242] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.107812] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.108478] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.109102] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.109345] vgaarb: loaded Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.109659] SCSI subsystem initialized Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.109824] libata version 3.00 loaded. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.110025] usbcore: registered new interface driver usbfs Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.110210] usbcore: registered new interface driver hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.110397] usbcore: registered new device driver usb Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.110789] PCI: Using ACPI for IRQ routing Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.110925] PCI: pci_cache_line_size set to 64 bytes Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111064] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111067] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111310] cfg80211: Calling CRDA to update world regulatory domain Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111494] NetLabel: Initializing Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111627] NetLabel: domain hash size = 128 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111761] NetLabel: protocols = UNLABELED CIPSOv4 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.111909] NetLabel: unlabeled traffic allowed by default Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.112099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.112368] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.114016] Switching to clocksource tsc Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.116188] pnp: PnP ACPI init Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.116356] ACPI: bus type pnp registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.142337] pnp: PnP ACPI: found 10 devices Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.142473] ACPI: ACPI bus type pnp unregistered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.142619] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.142761] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.142902] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143044] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143185] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143352] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143497] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143639] system 00:06: [io 0x0800-0x080f] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143778] system 00:06: [io 0x1000-0x107f] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.143917] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.144057] system 00:06: [io 0x1640-0x164f] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.144196] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.144346] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.179188] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.179442] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.179583] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.179819] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.179963] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.180200] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.180352] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.180588] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.180822] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.180959] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181099] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181238] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181389] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181528] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181666] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181810] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.181954] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.182193] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.182341] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.182484] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.182628] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.182867] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183006] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183150] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183305] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183546] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183685] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183828] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.183971] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.184215] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.184461] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.184603] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.184748] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.184987] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.185127] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.185276] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.185421] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.185660] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.185798] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.185941] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.186083] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.186332] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.186476] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.186614] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.186757] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.186902] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.187150] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.187481] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.187620] PCI: setting IRQ 11 as level-triggered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.187627] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.187869] pci 0000:00:1c.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188039] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188177] PCI: setting IRQ 6 as level-triggered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188184] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188434] pci 0000:00:1c.1: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188608] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188748] PCI: setting IRQ 10 as level-triggered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188754] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.188991] pci 0000:00:1c.2: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189159] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189309] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189548] pci 0000:00:1c.3: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189554] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189695] pci 0000:00:1e.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189710] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189949] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189952] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189955] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189958] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189962] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189965] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189968] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189971] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189975] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189978] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189981] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189984] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189987] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189991] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189994] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.189997] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190000] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190003] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190006] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190009] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190012] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190015] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190018] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190043] NET: Registered protocol family 2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190227] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.190608] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.191618] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.191966] TCP: Hash tables configured (established 131072 bind 65536) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.192106] TCP reno registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.192241] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.192403] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.192632] NET: Registered protocol family 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.192878] RPC: Registered udp transport module. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193015] RPC: Registered tcp transport module. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193151] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193329] pci 0000:00:02.0: Boot video device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193352] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193354] pci 0000:00:1d.0: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193375] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193378] pci 0000:00:1d.1: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193398] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193400] pci 0000:00:1d.2: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193420] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193422] pci 0000:00:1d.3: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193486] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.193631] Simple Boot Flag at 0x36 set to 0x1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.194410] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.194593] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.194829] Scanning for low memory corruption every 60 seconds Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.195385] audit: initializing netlink socket (disabled) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.195535] type=2000 audit(1279059604.195:1): initialized Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.227393] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.230678] VFS: Disk quotas dquot_6.5.2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.230888] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.231933] msgmni has been set to 1762 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.232161] SELinux: Registering netfilter hooks Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.232335] cryptomgr_test used greatest stack depth: 7248 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.232511] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.233398] cryptomgr_test used greatest stack depth: 6844 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.233608] alg: No test for stdrng (krng) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.233889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.234125] io scheduler noop registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.234280] io scheduler deadline registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.234431] io scheduler cfq registered (default) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.234692] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.234872] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.235046] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.235220] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.235484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.239242] Non-volatile memory driver v1.3 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.239464] intel_rng: FWH not detected Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.239599] Linux agpgart interface v0.103 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.239746] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.240204] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.243110] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.248209] ACPI: AC Adapter [ACAD] (on-line) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.248521] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.248802] ACPI: Lid Switch [LID] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.249015] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.251969] ACPI: Sleep Button [SLPB] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.252179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.252435] ACPI: Power Button [PWRB] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.252664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.252898] ACPI: Power Button [PWRF] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.253459] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.253699] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.254368] Marking TSC unstable due to TSC halts in idle Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.254600] Switching to clocksource hpet Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.282030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.282421] thermal LNXTHERM:01: registered as thermal_zone0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.282564] ACPI: Thermal Zone [TZ00] (56 C) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.292074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.292221] ACPI: Thermal Zone [TZ01] (56 C) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.292467] [drm] Initialized drm 1.1.0 20060810 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.292623] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.292862] i915 0000:00:02.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.295646] [drm] set up 7M of stolen space Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.399308] [drm] initialized overlay support Jul 13 22:20:28 OnlyTux-Poland kernel: [ 0.669075] ACPI: Battery Slot [BAT1] (battery absent) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.164830] Console: switching to colour frame buffer device 160x50 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.170227] fb0: inteldrmfb frame buffer device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.170270] registered panic notifier Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.170312] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.170439] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.173082] brd: module loaded Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.174163] loop: module loaded Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.174543] ata_piix 0000:00:1f.2: version 2.13 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.174567] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.174649] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.325042] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.325110] scsi0 : ata_piix Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.325270] scsi1 : ata_piix Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.326539] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.326606] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.327214] console [netcon0] enabled Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.327253] netconsole: network logging started Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.327357] usbcore: registered new interface driver libusual Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.327510] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329174] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329306] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329357] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329441] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329493] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329542] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.329770] mice: PS/2 mouse device common for all mice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.330348] rtc_cmos 00:07: RTC can wake from S4 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.330458] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.331691] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.332964] i2c /dev entries driver Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.334627] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.336258] cpuidle: using governor ladder Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.337756] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.339720] cpuidle: using governor menu Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.342460] usbcore: registered new interface driver hiddev Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.344256] usbcore: registered new interface driver usbhid Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.345798] usbhid: USB HID core driver Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.347671] GACT probability on Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.349261] Mirror/redirect action on Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.350883] Simple TC action Loaded Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.352749] netem: version 1.2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.354411] u32 classifier Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.356093] Performance counters on Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.357783] input device check on Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.359496] Actions configured Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.361230] Netfilter messages via NETLINK v0.30. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.363062] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.365072] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.366891] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.368723] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.370705] ctnetlink v0.93: registering with nfnetlink. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.372559] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.374414] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.376300] xt_time: kernel timezone is -0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.378701] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.380550] ClusterIP Version 0.8 loaded successfully Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.382418] arp_tables: (C) 2002 David S. Miller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.384307] TCP cubic registered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.386127] Initializing XFRM netlink socket Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.387965] NET: Registered protocol family 17 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.389874] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.391919] PM: Resume from disk failed. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.391937] registered taskstats version 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.394188] Magic number: 2:588:350 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.480554] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.482392] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.487514] ata1.00: configured for UDMA/100 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.489457] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.491692] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.493676] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.495756] sd 0:0:0:0: [sda] Write Protect is off Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.497728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.497775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.499943] sda: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.503421] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.525652] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.548334] ata2.00: configured for UDMA/33 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.555899] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.568485] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.570490] Uniform CD-ROM driver Revision: 3.20 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.572600] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.572700] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.575263] sda7 > Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.577825] sd 0:0:0:0: [sda] Attached SCSI disk Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.944860] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.977339] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.982409] EXT3-fs (sda6): recovery required on readonly filesystem Jul 13 22:20:28 OnlyTux-Poland kernel: [ 1.984569] EXT3-fs (sda6): write access will be enabled during recovery Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.497047] async/0 used greatest stack depth: 6544 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.858258] kjournald starting. Commit interval 5 seconds Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.860464] EXT3-fs (sda6): recovery complete Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.863224] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.865479] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.867725] Freeing unused kernel memory: 328k freed Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.870125] Write protecting the kernel text: 3496k Jul 13 22:20:28 OnlyTux-Poland kernel: [ 2.872380] Write protecting the kernel read-only data: 1704k Jul 13 22:20:28 OnlyTux-Poland kernel: [ 4.137864] stty used greatest stack depth: 6424 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 4.227096] grep used greatest stack depth: 6364 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.508145] udev: starting version 149 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664166] uhci_hcd: USB Universal Host Controller Interface driver Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664459] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664463] PCI: setting IRQ 5 as level-triggered Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664470] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664482] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664486] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664509] drivers/usb/core/inode.c: creating file 'devices' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664514] drivers/usb/core/inode.c: creating file '001' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664518] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664529] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664535] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664537] uhci_hcd 0000:00:1d.0: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664554] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664564] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664609] usb usb1: default language 0x0409 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664616] usb usb1: udev 1, busnum 1, minor = 0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664625] usb usb1: Product: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664628] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664630] usb usb1: SerialNumber: 0000:00:1d.0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664703] usb usb1: usb_probe_device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664707] usb usb1: configuration #1 chosen from 1 choice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664715] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664741] hub 1-0:1.0: usb_probe_interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664744] hub 1-0:1.0: usb_probe_interface - got id Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664746] hub 1-0:1.0: USB hub found Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664751] hub 1-0:1.0: 2 ports detected Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664753] hub 1-0:1.0: standalone hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664755] hub 1-0:1.0: no power switching (usb 1.0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664758] hub 1-0:1.0: individual port over-current protection Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664761] hub 1-0:1.0: power on to power good time: 2ms Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664765] hub 1-0:1.0: local power source is good Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664768] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664786] drivers/usb/core/inode.c: creating file '001' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664837] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664844] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664848] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664854] drivers/usb/core/inode.c: creating file '002' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664858] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664867] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664872] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664875] uhci_hcd 0000:00:1d.1: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664891] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664899] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664931] usb usb2: default language 0x0409 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664938] usb usb2: udev 1, busnum 2, minor = 128 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664941] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664944] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664947] usb usb2: Product: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664950] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.664952] usb usb2: SerialNumber: 0000:00:1d.1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665052] usb usb2: usb_probe_device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665055] usb usb2: configuration #1 chosen from 1 choice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665062] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665088] hub 2-0:1.0: usb_probe_interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665090] hub 2-0:1.0: usb_probe_interface - got id Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665093] hub 2-0:1.0: USB hub found Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665097] hub 2-0:1.0: 2 ports detected Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665099] hub 2-0:1.0: standalone hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665101] hub 2-0:1.0: no power switching (usb 1.0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665103] hub 2-0:1.0: individual port over-current protection Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665106] hub 2-0:1.0: power on to power good time: 2ms Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665110] hub 2-0:1.0: local power source is good Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665112] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665126] drivers/usb/core/inode.c: creating file '001' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665171] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665178] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665182] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665188] drivers/usb/core/inode.c: creating file '003' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665192] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665200] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665206] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665208] uhci_hcd 0000:00:1d.2: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665225] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665232] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665268] usb usb3: default language 0x0409 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665275] usb usb3: udev 1, busnum 3, minor = 256 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665278] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665284] usb usb3: Product: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665286] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665289] usb usb3: SerialNumber: 0000:00:1d.2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665340] usb usb3: usb_probe_device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665343] usb usb3: configuration #1 chosen from 1 choice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665350] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665374] hub 3-0:1.0: usb_probe_interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665377] hub 3-0:1.0: usb_probe_interface - got id Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665379] hub 3-0:1.0: USB hub found Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665383] hub 3-0:1.0: 2 ports detected Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665385] hub 3-0:1.0: standalone hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665387] hub 3-0:1.0: no power switching (usb 1.0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665389] hub 3-0:1.0: individual port over-current protection Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665392] hub 3-0:1.0: power on to power good time: 2ms Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665396] hub 3-0:1.0: local power source is good Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665398] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665412] drivers/usb/core/inode.c: creating file '001' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665455] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665463] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665467] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665472] drivers/usb/core/inode.c: creating file '004' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665476] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665484] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665490] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665492] uhci_hcd 0000:00:1d.3: Performing full reset Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665509] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665515] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665547] usb usb4: default language 0x0409 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665554] usb usb4: udev 1, busnum 4, minor = 384 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665557] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665560] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665563] usb usb4: Product: UHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665566] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665568] usb usb4: SerialNumber: 0000:00:1d.3 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665619] usb usb4: usb_probe_device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665621] usb usb4: configuration #1 chosen from 1 choice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665628] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665653] hub 4-0:1.0: usb_probe_interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665655] hub 4-0:1.0: usb_probe_interface - got id Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665657] hub 4-0:1.0: USB hub found Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665661] hub 4-0:1.0: 2 ports detected Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665663] hub 4-0:1.0: standalone hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665665] hub 4-0:1.0: no power switching (usb 1.0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665668] hub 4-0:1.0: individual port over-current protection Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665670] hub 4-0:1.0: power on to power good time: 2ms Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665674] hub 4-0:1.0: local power source is good Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665677] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.665691] drivers/usb/core/inode.c: creating file '001' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.718869] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.718877] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.718880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734414] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734418] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734464] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734490] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734494] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734509] drivers/usb/core/inode.c: creating file '005' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734527] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734532] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734552] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734565] ehci_hcd 0000:00:1d.7: debug port 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.734571] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.738455] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.738457] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.764065] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.765066] uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.765069] hub 4-0:1.0: port 1: status 0301 change 0003 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.765086] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.765089] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.784149] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.784157] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.788043] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.790185] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.790199] ath5k 0000:05:00.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 5.790236] ath5k 0000:05:00.0: registered as 'phy0' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.255339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.255353] hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.317108] ath: EEPROM regdomain: 0x65 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.317111] ath: EEPROM indicates we should expect a direct regpair map Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.317116] ath: Country alpha2 being used: 00 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.317118] ath: Regpair used: 0x65 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.319564] phy0: Selected rate control algorithm 'minstrel' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.319930] Registered led device: ath5k-phy0::rx Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.319946] Registered led device: ath5k-phy0::tx Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.319949] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.365046] usb 4-1: new low speed USB device using uhci_hcd and address 2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.368556] usb 4-1: uhci_result_common: failed with status 440000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371098] usb usb5: default language 0x0409 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371106] usb usb5: udev 1, busnum 5, minor = 512 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371112] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371115] usb usb5: Product: EHCI Host Controller Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371118] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371121] usb usb5: SerialNumber: 0000:00:1d.7 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371201] usb usb5: usb_probe_device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371205] usb usb5: configuration #1 chosen from 1 choice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371214] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371244] hub 5-0:1.0: usb_probe_interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371247] hub 5-0:1.0: usb_probe_interface - got id Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371250] hub 5-0:1.0: USB hub found Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371255] hub 5-0:1.0: 8 ports detected Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371257] hub 5-0:1.0: standalone hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371259] hub 5-0:1.0: no power switching (usb 1.0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371262] hub 5-0:1.0: individual port over-current protection Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371265] hub 5-0:1.0: power on to power good time: 20ms Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371269] hub 5-0:1.0: local power source is good Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371272] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371312] drivers/usb/core/inode.c: creating file '001' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371336] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371339] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371342] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371345] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.371444] modprobe used greatest stack depth: 6352 bytes left Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.372550] usb 4-1: uhci_result_common: failed with status 440000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.376544] usb 4-1: uhci_result_common: failed with status 440000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.394117] sdhci: Secure Digital Host Controller Interface driver Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.394121] sdhci: Copyright(c) Pierre Ossman Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.427078] hub 4-0:1.0: unable to enumerate USB device on port 1 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.471104] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.471111] hub 5-0:1.0: port 7: status 0501 change 0001 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499393] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499410] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499423] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499537] Registered led device: mmc0:: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499602] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499615] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499629] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499638] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499712] Registered led device: mmc1:: Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.499768] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.548338] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.548344] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.548356] b44 0000:06:01.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.564258] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.564267] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.564275] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.571050] hub 5-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.571063] hub 5-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.571073] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.583148] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.583341] b44: b44.c:v2.0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.591706] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.622052] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.622083] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.704049] usb usb1: suspend_rh (auto-stop) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.704075] usb usb2: suspend_rh (auto-stop) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.704101] usb usb3: suspend_rh (auto-stop) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.704145] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.704156] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.704165] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.742393] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.742399] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.742430] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.808087] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 6.910060] usb 4-1: new low speed USB device using uhci_hcd and address 3 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.051557] usb 4-1: skipped 1 descriptor after interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.056556] usb 4-1: default language 0x0409 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074552] usb 4-1: udev 3, busnum 4, minor = 386 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074555] usb 4-1: New USB device found, idVendor=045e, idProduct=0737 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074558] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074561] usb 4-1: Product: Compact Optical Mouse 500 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074564] usb 4-1: Manufacturer: Microsoft Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074661] usb 4-1: usb_probe_device Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.074665] usb 4-1: configuration #1 chosen from 1 choice Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.087555] usb 4-1: adding 4-1:1.0 (config #1, interface 0) Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.087608] usbhid 4-1:1.0: usb_probe_interface Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.087611] usbhid 4-1:1.0: usb_probe_interface - got id Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.101958] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input7 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.102170] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.102200] drivers/usb/core/inode.c: creating file '003' Jul 13 22:20:28 OnlyTux-Poland kernel: [ 7.102221] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 13 22:20:28 OnlyTux-Poland kernel: [ 8.136349] EXT3-fs (sda6): using internal journal Jul 13 22:20:28 OnlyTux-Poland kernel: [ 12.210410] kjournald starting. Commit interval 5 seconds Jul 13 22:20:28 OnlyTux-Poland kernel: [ 12.210699] EXT3-fs (sda7): using internal journal Jul 13 22:20:28 OnlyTux-Poland kernel: [ 12.210704] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 13 22:20:28 OnlyTux-Poland kernel: [ 12.229992] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 12.265640] NTFS volume version 3.1. Jul 13 22:20:28 OnlyTux-Poland kernel: [ 12.353704] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 13 22:20:28 OnlyTux-Poland kernel: [ 14.780679] find used greatest stack depth: 6268 bytes left Jul 13 22:20:28 OnlyTux-Poland acpid: starting up with proc fs Jul 13 22:20:28 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 13 22:20:28 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 13 22:20:28 OnlyTux-Poland acpid: 1 rule loaded Jul 13 22:20:28 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 13 22:20:29 OnlyTux-Poland acpid: client connected from 3151[0:0] Jul 13 22:20:29 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 22:20:29 OnlyTux-Poland /usr/sbin/gpm[3212]: *** info [daemon/startup.c(136)]: Jul 13 22:20:29 OnlyTux-Poland /usr/sbin/gpm[3212]: Started gpm successfully. Entered daemon mode. Jul 13 22:20:29 OnlyTux-Poland kernel: [ 23.358887] uhci_hcd 0000:00:1d.3: reserve dev 3 ep81-INT, period 8, phase 4, 93 us Jul 13 22:20:29 OnlyTux-Poland /usr/sbin/gpm[3212]: *** info [mice.c(1988)]: Jul 13 22:20:29 OnlyTux-Poland /usr/sbin/gpm[3212]: imps2: Auto-detected intellimouse PS/2 Jul 13 22:20:32 OnlyTux-Poland kernel: [ 25.854193] hald-probe-stor used greatest stack depth: 6224 bytes left Jul 13 22:20:32 OnlyTux-Poland acpid: client connected from 3479[102:1002] Jul 13 22:20:32 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 22:20:34 OnlyTux-Poland dhcpcd[3999]: eth0: dhcpcd 4.0.15 starting Jul 13 22:20:34 OnlyTux-Poland dhcpcd[3999]: eth0: broadcasting for a lease Jul 13 22:20:37 OnlyTux-Poland kernel: [ 30.704228] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 13 22:20:37 OnlyTux-Poland kernel: [ 30.704231] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 13 22:20:38 OnlyTux-Poland dhcpcd[3999]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 13 22:20:38 OnlyTux-Poland dhcpcd[3999]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 13 22:20:38 OnlyTux-Poland dhcpcd[3999]: eth0: checking 192.168.1.4 is available on attached networks Jul 13 22:20:43 OnlyTux-Poland dhcpcd[3999]: eth0: leased 192.168.1.4 for 604800 seconds Jul 13 22:20:44 OnlyTux-Poland cron[4211]: (CRON) STARTUP (V5.0) Jul 13 22:20:50 OnlyTux-Poland login[4278]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 13 22:20:53 OnlyTux-Poland acpid: client connected from 4307[0:1000] Jul 13 22:20:53 OnlyTux-Poland acpid: 1 client rule loaded Jul 13 22:21:18 OnlyTux-Poland kernel: [ 72.049853] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 13 22:22:23 OnlyTux-Poland kernel: [ 137.130896] Terminal used greatest stack depth: 6196 bytes left Jul 13 22:24:06 OnlyTux-Poland kernel: [ 240.479074] skype used greatest stack depth: 5576 bytes left Jul 13 22:24:07 OnlyTux-Poland shutdown[4385]: shutting down for system halt Jul 13 22:24:07 OnlyTux-Poland init: Switching to runlevel: 0 Jul 13 22:24:07 OnlyTux-Poland kernel: [ 240.654895] uhci_hcd 0000:00:1d.3: release dev 3 ep81-INT, period 8, phase 4, 93 us Jul 13 22:24:07 OnlyTux-Poland kernel: [ 240.752895] X used greatest stack depth: 5420 bytes left Jul 13 22:24:07 OnlyTux-Poland kernel: [ 241.032642] uhci_hcd 0000:00:1d.3: reserve dev 3 ep81-INT, period 8, phase 4, 93 us Jul 13 22:24:07 OnlyTux-Poland /usr/sbin/gpm[3212]: *** info [mice.c(1988)]: Jul 13 22:24:07 OnlyTux-Poland /usr/sbin/gpm[3212]: imps2: Auto-detected intellimouse PS/2 Jul 13 22:24:11 OnlyTux-Poland acpid: client 4307[0:1000] has disconnected Jul 13 22:24:11 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000001 Jul 13 22:24:11 OnlyTux-Poland dhcpcd[4006]: eth0: received SIGTERM, stopping Jul 13 22:24:11 OnlyTux-Poland kernel: [ 245.275318] b44 ssb0:0: eth0: powering down PHY Jul 13 22:24:13 OnlyTux-Poland kernel: [ 246.949772] uhci_hcd 0000:00:1d.3: release dev 3 ep81-INT, period 8, phase 4, 93 us Jul 13 22:24:15 OnlyTux-Poland acpid: exiting Jul 13 22:24:15 OnlyTux-Poland syslog-ng[2973]: Termination requested via signal, terminating; Jul 13 22:24:15 OnlyTux-Poland syslog-ng[2973]: syslog-ng shutting down; version='3.1.1' Jul 17 00:00:01 OnlyTux-Poland cron[5037]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 00:10:01 OnlyTux-Poland cron[5081]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 00:20:01 OnlyTux-Poland cron[5119]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 00:30:01 OnlyTux-Poland cron[5196]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 00:40:01 OnlyTux-Poland cron[5233]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 00:50:01 OnlyTux-Poland cron[5327]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 00:59:01 OnlyTux-Poland cron[5391]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 01:00:01 OnlyTux-Poland cron[5405]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 01:10:01 OnlyTux-Poland cron[5470]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 01:20:01 OnlyTux-Poland cron[5537]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 01:30:01 OnlyTux-Poland cron[5623]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 01:40:01 OnlyTux-Poland cron[5665]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 01:50:01 OnlyTux-Poland cron[5810]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 01:59:01 OnlyTux-Poland cron[5888]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 02:00:01 OnlyTux-Poland cron[5896]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 02:10:01 OnlyTux-Poland cron[5955]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 02:20:01 OnlyTux-Poland cron[6007]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 02:30:01 OnlyTux-Poland cron[6023]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 02:40:01 OnlyTux-Poland cron[6039]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 02:50:01 OnlyTux-Poland cron[6055]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 02:59:01 OnlyTux-Poland cron[6072]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 03:00:01 OnlyTux-Poland cron[6074]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 03:09:01 OnlyTux-Poland cron[6091]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.daily) Jul 17 03:10:01 OnlyTux-Poland cron[6093]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 03:20:01 OnlyTux-Poland cron[6165]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 03:30:01 OnlyTux-Poland cron[6182]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 03:40:01 OnlyTux-Poland cron[6198]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 03:49:03 OnlyTux-Poland kernel: [26576.619991] firefox used greatest stack depth: 5396 bytes left Jul 17 03:49:03 OnlyTux-Poland kernel: [26576.741512] plugin-containe used greatest stack depth: 5008 bytes left Jul 17 03:50:01 OnlyTux-Poland cron[6377]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 03:59:01 OnlyTux-Poland cron[6416]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 04:00:01 OnlyTux-Poland cron[6418]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 04:01:48 OnlyTux-Poland shutdown[6445]: shutting down for system halt Jul 17 04:01:49 OnlyTux-Poland init: Switching to runlevel: 0 Jul 17 04:01:49 OnlyTux-Poland kernel: [27341.872929] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 04:01:49 OnlyTux-Poland kernel: [27342.064193] X used greatest stack depth: 4948 bytes left Jul 17 04:01:49 OnlyTux-Poland kernel: [27342.179786] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 04:01:49 OnlyTux-Poland /usr/sbin/gpm[3189]: *** info [mice.c(1988)]: Jul 17 04:01:49 OnlyTux-Poland /usr/sbin/gpm[3189]: imps2: Auto-detected intellimouse PS/2 Jul 17 04:01:53 OnlyTux-Poland dhcpcd[3983]: eth0: received SIGTERM, stopping Jul 17 04:01:53 OnlyTux-Poland kernel: [27346.293452] b44 ssb0:0: eth0: powering down PHY Jul 17 04:01:54 OnlyTux-Poland kernel: [27347.702818] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 04:01:56 OnlyTux-Poland acpid: exiting Jul 17 04:01:57 OnlyTux-Poland syslog-ng[2950]: Termination requested via signal, terminating; Jul 17 04:01:57 OnlyTux-Poland syslog-ng[2950]: syslog-ng shutting down; version='3.1.1' Jul 17 15:36:26 OnlyTux-Poland syslog-ng[2952]: syslog-ng starting up; version='3.1.1' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Tue Jul 13 17:24:38 CEST 2010 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558ac4, node_mem_map c165b300 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369da0 - 0xc1564ba4 (2027 kB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369da0 (3495 kB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.000000] Detected 1729.098 MHz processor. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.19 BogoMIPS (lpj=1729098) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.001291] Security Framework initialized Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.001429] SELinux: Initializing. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.001567] SELinux: Starting in permissive mode Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.001573] Mount-cache hash table entries: 512 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.002105] Initializing cgroup subsys ns Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.002245] Initializing cgroup subsys cpuacct Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.002381] Initializing cgroup subsys freezer Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.002519] Initializing cgroup subsys net_cls Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.002676] mce: CPU supports 6 MCE banks Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.002817] using mwait in idle threads. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003009] Performance Events: Core events, core PMU driver. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003215] ... version: 1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003350] ... bit width: 40 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003486] ... generic registers: 2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003622] ... value mask: 000000ffffffffff Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003760] ... max period: 000000007fffffff Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.003897] ... fixed-purpose events: 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.004002] ... event mask: 0000000000000003 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.004140] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.004348] Checking 'hlt' instruction... OK. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.008596] ACPI: Core revision 20100121 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.021432] ACPI: setting ELCR to 0200 (from 0c60) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.023098] khelper used greatest stack depth: 7296 bytes left Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.023486] Time: 15:36:02 Date: 07/17/10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.023651] NET: Registered protocol family 16 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.024190] ACPI: bus type pci registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.024447] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.024686] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.024827] PCI: Using MMCONFIG for extended config space Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.024965] PCI: Using configuration type 1 for base access Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.025464] khelper used greatest stack depth: 7260 bytes left Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.030944] bio: create slab at 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.032442] ACPI: EC: Look up EC in DSDT Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.036122] ACPI: BIOS _OSI(Linux) query ignored Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.037187] ACPI: Interpreter enabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.037334] ACPI: (supports S0 S3 S4 S5) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.037617] ACPI: Using PIC for interrupt routing Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.088581] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.089317] ACPI: No dock devices found. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.090006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.090846] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092335] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092339] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092342] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092346] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092349] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092353] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092357] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092423] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092428] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092434] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092440] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092478] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092584] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092647] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092652] pci 0000:00:1b.0: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092748] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092754] pci 0000:00:1c.0: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092858] pci 0000:00:1c.1: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092957] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.092963] pci 0000:00:1c.2: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093074] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093080] pci 0000:00:1c.3: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093143] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093207] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093271] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093334] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093395] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093458] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093464] pci 0000:00:1d.7: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093627] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.093864] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094547] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094556] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094564] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094573] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094581] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094618] pci 0000:00:1f.2: PME# supported from D3hot Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094623] pci 0000:00:1f.2: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094684] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094778] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094919] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094925] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.094934] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095029] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095169] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095175] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095184] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095245] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095385] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095391] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095400] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095508] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095600] pci 0000:05:00.0: PME# supported from D3hot Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095606] pci 0000:05:00.0: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095634] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095774] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095780] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095789] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095851] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095908] pci 0000:06:01.0: supports D1 D2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095911] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095917] pci 0000:06:01.0: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095962] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.095991] pci 0000:06:04.0: supports D1 D2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096003] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096010] pci 0000:06:04.0: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096053] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096124] pci 0000:06:04.1: supports D1 D2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096127] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096133] pci 0000:06:04.1: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096175] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096247] pci 0000:06:04.2: supports D1 D2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096249] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096255] pci 0000:06:04.2: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096297] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096369] pci 0000:06:04.3: supports D1 D2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096371] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096377] pci 0000:06:04.3: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096421] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096491] pci 0000:06:04.4: supports D1 D2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096494] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096500] pci 0000:06:04.4: PME# disabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096565] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096708] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096714] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096723] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096727] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096733] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.096787] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097035] pci_bus 0000:00: on NUMA node 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.097873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.103383] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.103934] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.104488] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.105094] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.105668] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.106369] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.106940] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.107512] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.108118] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.108363] vgaarb: loaded Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.108679] SCSI subsystem initialized Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.108843] libata version 3.00 loaded. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.109051] usbcore: registered new interface driver usbfs Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.109231] usbcore: registered new interface driver hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.109415] usbcore: registered new device driver usb Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.109812] PCI: Using ACPI for IRQ routing Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.109948] PCI: pci_cache_line_size set to 64 bytes Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110084] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110088] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110331] cfg80211: Calling CRDA to update world regulatory domain Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110517] NetLabel: Initializing Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110649] NetLabel: domain hash size = 128 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110785] NetLabel: protocols = UNLABELED CIPSOv4 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.110934] NetLabel: unlabeled traffic allowed by default Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.111100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.111369] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.113015] Switching to clocksource tsc Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.115187] pnp: PnP ACPI init Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.115353] ACPI: bus type pnp registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.140290] pnp: PnP ACPI: found 10 devices Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.140426] ACPI: ACPI bus type pnp unregistered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.140574] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.140714] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.140855] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.140995] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141136] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141289] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141435] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141579] system 00:06: [io 0x0800-0x080f] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141719] system 00:06: [io 0x1000-0x107f] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141858] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.141997] system 00:06: [io 0x1640-0x164f] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.142136] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.142286] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.177125] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.177376] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.177519] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.177754] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.177896] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.178132] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.178284] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.178520] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.178756] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.178895] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179034] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179174] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179324] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179464] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179602] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179745] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.179889] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.180130] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.180279] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.180421] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.180564] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.180805] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.180945] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.181088] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.181242] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.181481] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.181621] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.181761] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.181903] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.182146] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.182396] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.182537] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.182682] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.182923] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.183063] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.183203] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.183358] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.183599] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.183736] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.183878] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.184022] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.184269] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.184414] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.184552] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.184696] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.184840] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.185089] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.185422] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.185561] PCI: setting IRQ 11 as level-triggered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.185568] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.185808] pci 0000:00:1c.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.185978] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186117] PCI: setting IRQ 6 as level-triggered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186123] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186374] pci 0000:00:1c.1: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186544] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186682] PCI: setting IRQ 10 as level-triggered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186689] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.186928] pci 0000:00:1c.2: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187096] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187249] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187487] pci 0000:00:1c.3: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187493] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187635] pci 0000:00:1e.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187650] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187890] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187893] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187897] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187900] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187903] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187907] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187910] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187913] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187916] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187919] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187923] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187926] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187929] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187932] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187935] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187938] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187942] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187945] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187948] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187951] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187954] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187957] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187960] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.187987] NET: Registered protocol family 2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.188170] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.188548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.189556] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.189905] TCP: Hash tables configured (established 131072 bind 65536) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.190045] TCP reno registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.190179] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.190339] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.190570] NET: Registered protocol family 1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.190816] RPC: Registered udp transport module. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.190955] RPC: Registered tcp transport module. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191090] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191270] pci 0000:00:02.0: Boot video device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191292] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191295] pci 0000:00:1d.0: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191315] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191318] pci 0000:00:1d.1: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191337] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191340] pci 0000:00:1d.2: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191360] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191362] pci 0000:00:1d.3: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191426] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.191569] Simple Boot Flag at 0x36 set to 0x1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.192348] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.192530] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.192769] Scanning for low memory corruption every 60 seconds Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.193325] audit: initializing netlink socket (disabled) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.193477] type=2000 audit(1279380962.193:1): initialized Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.225348] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.228659] VFS: Disk quotas dquot_6.5.2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.228872] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.229879] msgmni has been set to 1762 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.230116] SELinux: Registering netfilter hooks Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.230324] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.231205] alg: No test for stdrng (krng) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.231529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.231761] io scheduler noop registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.231894] io scheduler deadline registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.232043] io scheduler cfq registered (default) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.232331] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.232511] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.232688] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.232862] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.233112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.236932] Non-volatile memory driver v1.3 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.237103] intel_rng: FWH not detected Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.237266] Linux agpgart interface v0.103 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.237413] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.237867] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.240738] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.243176] ACPI: AC Adapter [ACAD] (on-line) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.243499] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.243783] ACPI: Lid Switch [LID] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.243996] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.244253] ACPI: Sleep Button [SLPB] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.247141] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.247399] ACPI: Power Button [PWRB] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.247626] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.247863] ACPI: Power Button [PWRF] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.248419] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.248662] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.249328] Marking TSC unstable due to TSC halts in idle Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.249563] Switching to clocksource hpet Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.276031] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.276222] thermal LNXTHERM:01: registered as thermal_zone0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.276466] ACPI: Thermal Zone [TZ00] (35 C) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.287075] thermal LNXTHERM:02: registered as thermal_zone1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.287220] ACPI: Thermal Zone [TZ01] (35 C) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.287463] [drm] Initialized drm 1.1.0 20060810 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.287618] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.287854] i915 0000:00:02.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.290632] [drm] set up 7M of stolen space Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.394307] [drm] initialized overlay support Jul 17 15:36:26 OnlyTux-Poland kernel: [ 0.664076] ACPI: Battery Slot [BAT1] (battery absent) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.155829] Console: switching to colour frame buffer device 160x50 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.161227] fb0: inteldrmfb frame buffer device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.161270] registered panic notifier Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.161312] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.161436] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.164071] brd: module loaded Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.165155] loop: module loaded Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.165532] ata_piix 0000:00:1f.2: version 2.13 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.165555] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.165637] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.316041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.316110] scsi0 : ata_piix Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.316269] scsi1 : ata_piix Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.317539] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.317606] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.318209] console [netcon0] enabled Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.318248] netconsole: network logging started Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.318353] usbcore: registered new interface driver libusual Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.318505] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320136] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320268] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320320] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320404] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320455] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320504] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.320738] mice: PS/2 mouse device common for all mice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.321320] rtc_cmos 00:07: RTC can wake from S4 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.321430] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.322663] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.323934] i2c /dev entries driver Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.325594] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.327220] cpuidle: using governor ladder Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.328716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.330658] cpuidle: using governor menu Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.333411] usbcore: registered new interface driver hiddev Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.335202] usbcore: registered new interface driver usbhid Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.336739] usbhid: USB HID core driver Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.338606] GACT probability on Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.340193] Mirror/redirect action on Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.341814] Simple TC action Loaded Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.343678] netem: version 1.2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.345337] u32 classifier Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.347033] Performance counters on Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.348724] input device check on Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.350435] Actions configured Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.352171] Netfilter messages via NETLINK v0.30. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.353984] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.355954] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.357776] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.359608] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.361592] ctnetlink v0.93: registering with nfnetlink. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.363425] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.365280] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.367165] xt_time: kernel timezone is -0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.369581] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.371433] ClusterIP Version 0.8 loaded successfully Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.373306] arp_tables: (C) 2002 David S. Miller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.375169] TCP cubic registered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.376989] Initializing XFRM netlink socket Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.378855] NET: Registered protocol family 17 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.380767] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.382813] PM: Resume from disk failed. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.382832] registered taskstats version 1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.385096] Magic number: 2:455:639 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.471553] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.473408] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.481514] ata1.00: configured for UDMA/100 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.483460] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.485697] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.487681] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.489762] sd 0:0:0:0: [sda] Write Protect is off Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.491736] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.491844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.494416] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.496664] sda: sda1 sda2 sda3 sda4 < Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.537333] ata2.00: configured for UDMA/33 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.542966] sda5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.544934] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.551087] sda6sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.561694] Uniform CD-ROM driver Revision: 3.20 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.563803] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.563907] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.569076] sda7 > Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.571619] sd 0:0:0:0: [sda] Attached SCSI disk Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.938798] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 1.971487] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.009077] kjournald starting. Commit interval 5 seconds Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.011190] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.013349] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.015513] Freeing unused kernel memory: 328k freed Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.017854] Write protecting the kernel text: 3496k Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.020064] Write protecting the kernel read-only data: 1704k Jul 17 15:36:26 OnlyTux-Poland kernel: [ 2.491050] async/0 used greatest stack depth: 6544 bytes left Jul 17 15:36:26 OnlyTux-Poland kernel: [ 3.331596] stty used greatest stack depth: 6364 bytes left Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.713138] udev: starting version 149 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884411] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884669] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884672] PCI: setting IRQ 5 as level-triggered Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884679] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884701] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884705] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884727] drivers/usb/core/inode.c: creating file 'devices' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884731] drivers/usb/core/inode.c: creating file '001' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884735] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884746] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884751] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884771] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884784] ehci_hcd 0000:00:1d.7: debug port 1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.884790] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.888674] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.888676] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.974760] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.974774] ath5k 0000:05:00.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 4.974810] ath5k 0000:05:00.0: registered as 'phy0' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.448060] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.448068] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.451952] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.510998] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511445] usb usb1: default language 0x0409 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511453] usb usb1: udev 1, busnum 1, minor = 0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511462] usb usb1: Product: EHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511465] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511468] usb usb1: SerialNumber: 0000:00:1d.7 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511548] usb usb1: usb_probe_device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511552] usb usb1: configuration #1 chosen from 1 choice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511561] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511588] hub 1-0:1.0: usb_probe_interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511591] hub 1-0:1.0: usb_probe_interface - got id Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511593] hub 1-0:1.0: USB hub found Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511599] hub 1-0:1.0: 8 ports detected Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511601] hub 1-0:1.0: standalone hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511603] hub 1-0:1.0: no power switching (usb 1.0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511605] hub 1-0:1.0: individual port over-current protection Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511608] hub 1-0:1.0: power on to power good time: 20ms Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511613] hub 1-0:1.0: local power source is good Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511616] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.511656] drivers/usb/core/inode.c: creating file '001' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.514454] ath: EEPROM regdomain: 0x65 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.514457] ath: EEPROM indicates we should expect a direct regpair map Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.514462] ath: Country alpha2 being used: 00 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.514464] ath: Regpair used: 0x65 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.519256] phy0: Selected rate control algorithm 'minstrel' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.519625] Registered led device: ath5k-phy0::rx Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.519641] Registered led device: ath5k-phy0::tx Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.519645] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.612338] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.612345] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613109] uhci_hcd: USB Universal Host Controller Interface driver Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613185] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613196] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613201] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613209] drivers/usb/core/inode.c: creating file '002' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613216] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613226] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613232] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613235] uhci_hcd 0000:00:1d.0: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613252] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613261] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613305] usb usb2: default language 0x0409 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613313] usb usb2: udev 1, busnum 2, minor = 128 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613322] usb usb2: Product: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613324] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613327] usb usb2: SerialNumber: 0000:00:1d.0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613459] usb usb2: usb_probe_device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613463] usb usb2: configuration #1 chosen from 1 choice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613472] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613535] hub 2-0:1.0: usb_probe_interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613538] hub 2-0:1.0: usb_probe_interface - got id Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613541] hub 2-0:1.0: USB hub found Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613547] hub 2-0:1.0: 2 ports detected Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613549] hub 2-0:1.0: standalone hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613551] hub 2-0:1.0: no power switching (usb 1.0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613553] hub 2-0:1.0: individual port over-current protection Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613556] hub 2-0:1.0: power on to power good time: 2ms Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613561] hub 2-0:1.0: local power source is good Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613564] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613584] drivers/usb/core/inode.c: creating file '001' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613621] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613641] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613649] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613653] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613663] drivers/usb/core/inode.c: creating file '003' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613667] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613676] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613681] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613684] uhci_hcd 0000:00:1d.1: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613700] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613706] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613741] usb usb3: default language 0x0409 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613748] usb usb3: udev 1, busnum 3, minor = 256 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613751] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613754] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613757] usb usb3: Product: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613759] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.613762] usb usb3: SerialNumber: 0000:00:1d.1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614162] usb usb3: usb_probe_device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614166] usb usb3: configuration #1 chosen from 1 choice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614174] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614255] hub 3-0:1.0: usb_probe_interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614257] hub 3-0:1.0: usb_probe_interface - got id Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614260] hub 3-0:1.0: USB hub found Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614266] hub 3-0:1.0: 2 ports detected Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614268] hub 3-0:1.0: standalone hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614270] hub 3-0:1.0: no power switching (usb 1.0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614272] hub 3-0:1.0: individual port over-current protection Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614275] hub 3-0:1.0: power on to power good time: 2ms Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614279] hub 3-0:1.0: local power source is good Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614282] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614301] drivers/usb/core/inode.c: creating file '001' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614335] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614356] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614365] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614369] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614377] drivers/usb/core/inode.c: creating file '004' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614383] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614391] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614397] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614400] uhci_hcd 0000:00:1d.2: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614417] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614425] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614460] usb usb4: default language 0x0409 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614467] usb usb4: udev 1, busnum 4, minor = 384 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614470] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614473] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614476] usb usb4: Product: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614478] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614481] usb usb4: SerialNumber: 0000:00:1d.2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614831] usb usb4: usb_probe_device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614835] usb usb4: configuration #1 chosen from 1 choice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614843] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614921] hub 4-0:1.0: usb_probe_interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614924] hub 4-0:1.0: usb_probe_interface - got id Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614926] hub 4-0:1.0: USB hub found Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614933] hub 4-0:1.0: 2 ports detected Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614935] hub 4-0:1.0: standalone hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614937] hub 4-0:1.0: no power switching (usb 1.0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614939] hub 4-0:1.0: individual port over-current protection Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614942] hub 4-0:1.0: power on to power good time: 2ms Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614946] hub 4-0:1.0: local power source is good Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614948] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.614965] drivers/usb/core/inode.c: creating file '001' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615031] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615052] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615061] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615065] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615072] drivers/usb/core/inode.c: creating file '005' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615085] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615091] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615093] uhci_hcd 0000:00:1d.3: Performing full reset Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615110] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615117] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615154] usb usb5: default language 0x0409 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615161] usb usb5: udev 1, busnum 5, minor = 512 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615164] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615167] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615170] usb usb5: Product: UHCI Host Controller Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615173] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615175] usb usb5: SerialNumber: 0000:00:1d.3 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615518] usb usb5: usb_probe_device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615522] usb usb5: configuration #1 chosen from 1 choice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615530] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615611] hub 5-0:1.0: usb_probe_interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615614] hub 5-0:1.0: usb_probe_interface - got id Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615617] hub 5-0:1.0: USB hub found Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615622] hub 5-0:1.0: 2 ports detected Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615624] hub 5-0:1.0: standalone hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615626] hub 5-0:1.0: no power switching (usb 1.0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615629] hub 5-0:1.0: individual port over-current protection Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615632] hub 5-0:1.0: power on to power good time: 2ms Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615636] hub 5-0:1.0: local power source is good Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615638] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615654] drivers/usb/core/inode.c: creating file '001' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.615690] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.632275] sdhci: Secure Digital Host Controller Interface driver Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.632279] sdhci: Copyright(c) Pierre Ossman Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.638951] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.638968] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.638981] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639102] Registered led device: mmc0:: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639164] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639179] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639194] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639203] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639276] Registered led device: mmc1:: Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.639337] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.687205] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.687211] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.687223] b44 0000:06:01.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.695074] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.695082] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.695090] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.712042] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.712053] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.712064] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.715034] uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.715038] hub 5-0:1.0: port 1: status 0301 change 0003 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.718130] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.718309] b44: b44.c:v2.0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.726702] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.763046] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.763075] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.763082] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.763085] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.763089] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.772199] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.772207] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.772211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.815055] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.815069] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s Jul 17 15:36:26 OnlyTux-Poland kernel: [ 5.917059] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.059184] usb 5-1: skipped 1 descriptor after interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.064176] usb 5-1: default language 0x0409 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082177] usb 5-1: udev 2, busnum 5, minor = 513 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082180] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082184] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082187] usb 5-1: Product: Compact Optical Mouse 500 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082189] usb 5-1: Manufacturer: Microsoft Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082278] usb 5-1: usb_probe_device Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.082282] usb 5-1: configuration #1 chosen from 1 choice Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.095883] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.095943] usbhid 5-1:1.0: usb_probe_interface Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.095947] usbhid 5-1:1.0: usb_probe_interface - got id Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.120540] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.120633] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.120664] drivers/usb/core/inode.c: creating file '002' Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.120692] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.484830] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.484836] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.484871] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.704051] usb usb2: suspend_rh (auto-stop) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.704080] usb usb3: suspend_rh (auto-stop) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.704106] usb usb4: suspend_rh (auto-stop) Jul 17 15:36:26 OnlyTux-Poland kernel: [ 6.781190] udevd used greatest stack depth: 6108 bytes left Jul 17 15:36:26 OnlyTux-Poland kernel: [ 7.466266] EXT3-fs (sda6): using internal journal Jul 17 15:36:26 OnlyTux-Poland kernel: [ 8.692823] kjournald starting. Commit interval 5 seconds Jul 17 15:36:26 OnlyTux-Poland kernel: [ 8.693082] EXT3-fs (sda7): using internal journal Jul 17 15:36:26 OnlyTux-Poland kernel: [ 8.693088] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 17 15:36:26 OnlyTux-Poland kernel: [ 8.712366] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 8.759067] NTFS volume version 3.1. Jul 17 15:36:26 OnlyTux-Poland kernel: [ 8.880482] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 17 15:36:27 OnlyTux-Poland acpid: starting up with proc fs Jul 17 15:36:27 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 17 15:36:27 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 17 15:36:27 OnlyTux-Poland acpid: 1 rule loaded Jul 17 15:36:27 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 17 15:36:27 OnlyTux-Poland acpid: client connected from 3130[0:0] Jul 17 15:36:27 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 15:36:28 OnlyTux-Poland /usr/sbin/gpm[3191]: *** info [daemon/startup.c(136)]: Jul 17 15:36:28 OnlyTux-Poland /usr/sbin/gpm[3191]: Started gpm successfully. Entered daemon mode. Jul 17 15:36:28 OnlyTux-Poland kernel: [ 19.381867] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 15:36:28 OnlyTux-Poland /usr/sbin/gpm[3191]: *** info [mice.c(1988)]: Jul 17 15:36:28 OnlyTux-Poland /usr/sbin/gpm[3191]: imps2: Auto-detected intellimouse PS/2 Jul 17 15:36:30 OnlyTux-Poland acpid: client connected from 3458[102:1002] Jul 17 15:36:30 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 15:36:31 OnlyTux-Poland dhcpcd[3978]: eth0: dhcpcd 4.0.15 starting Jul 17 15:36:31 OnlyTux-Poland dhcpcd[3978]: eth0: broadcasting for a lease Jul 17 15:36:35 OnlyTux-Poland kernel: [ 26.704225] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 17 15:36:35 OnlyTux-Poland kernel: [ 26.704229] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 17 15:36:36 OnlyTux-Poland dhcpcd[3978]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 17 15:36:36 OnlyTux-Poland dhcpcd[3978]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 17 15:36:36 OnlyTux-Poland dhcpcd[3978]: eth0: checking 192.168.1.4 is available on attached networks Jul 17 15:36:41 OnlyTux-Poland dhcpcd[3978]: eth0: leased 192.168.1.4 for 604800 seconds Jul 17 15:36:42 OnlyTux-Poland cron[4190]: (CRON) STARTUP (V5.0) Jul 17 15:36:48 OnlyTux-Poland login[4257]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 17 15:36:51 OnlyTux-Poland acpid: client connected from 4286[0:1000] Jul 17 15:36:51 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 15:37:14 OnlyTux-Poland kernel: [ 65.629999] skype used greatest stack depth: 5840 bytes left Jul 17 15:37:18 OnlyTux-Poland kernel: [ 69.903944] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 17 15:40:01 OnlyTux-Poland cron[4424]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 15:48:00 OnlyTux-Poland kernel: [ 711.914251] acroread used greatest stack depth: 5564 bytes left Jul 17 15:50:01 OnlyTux-Poland cron[4492]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 15:59:01 OnlyTux-Poland cron[4507]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 16:00:01 OnlyTux-Poland cron[4510]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 16:02:33 OnlyTux-Poland kernel: [ 1584.235055] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jul 17 16:02:33 OnlyTux-Poland kernel: [ 1584.235208] render error detected, EIR: 0x00000000 Jul 17 16:02:33 OnlyTux-Poland kernel: [ 1584.235525] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 101681 at 101673) Jul 17 16:02:33 OnlyTux-Poland kernel: [ 1584.240684] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:02:33 OnlyTux-Poland kernel: [ 1585.082427] X used greatest stack depth: 5436 bytes left Jul 17 16:02:33 OnlyTux-Poland kernel: [ 1585.140771] firefox used greatest stack depth: 5424 bytes left Jul 17 16:02:47 OnlyTux-Poland acpid: client 4286[0:1000] has disconnected Jul 17 16:02:47 OnlyTux-Poland init: Switching to runlevel: 0 Jul 17 16:03:24 OnlyTux-Poland syslog-ng[3019]: syslog-ng starting up; version='3.1.1' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.32-gentoo-r7 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #8 Fri Jul 9 19:41:43 CEST 2010 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] KERNEL supported cpus: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Intel GenuineIntel Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] AMD AuthenticAMD Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] NSC Geode by NSC Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Cyrix CyrixInstead Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Centaur CentaurHauls Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Transmeta GenuineTMx86 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Transmeta TransmetaCPU Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] UMC UMC UMC UMC Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe3000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe3000 page 4k Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe3000 @ 10000-15000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe3000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe3000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] node 0 low ram: 00000000 - 37fe3000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] node 0 bootmap 00011000 - 00018000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037fe3000] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 000165a574] TEXT DATA BSS ==> [0001000000 - 000165a574] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] #3 [000165b000 - 00016610d5] BRK ==> [000165b000 - 00016610d5] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe3 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] early_node_map[3] active PFN ranges Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000000 -> 0x00000001 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe3 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229235 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1562f38, node_mem_map c1662000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223491 pages, LIFO batch:31 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227443 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Memory: 902312k/917388k available (3544k kernel code, 14520k reserved, 2019k data, 316k init, 0k highmem) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e3000 - 0xfffe3000 ( 120 MB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe3000 ( 895 MB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc156f000 - 0xc15be000 ( 316 kB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1376008 - 0xc156eff4 (2019 kB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1376008 (3544 kB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.722 MHz processor. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.44 BogoMIPS (lpj=1728722) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.001190] Security Framework initialized Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002011] Mount-cache hash table entries: 512 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002186] Initializing cgroup subsys ns Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002274] Initializing cgroup subsys cpuacct Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002361] Initializing cgroup subsys freezer Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002449] Initializing cgroup subsys net_cls Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002551] CPU: L1 I cache: 32K, L1 D cache: 32K Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002672] CPU: L2 cache: 1024K Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002759] mce: CPU supports 6 MCE banks Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.002852] using mwait in idle threads. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.003008] Performance Events: no PMU driver, software events only. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.003133] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.003294] Checking 'hlt' instruction... OK. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.007575] ACPI: Core revision 20090903 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.018935] ACPI: setting ELCR to 0200 (from 0c60) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.020225] khelper used greatest stack depth: 7516 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.020362] khelper used greatest stack depth: 7384 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.021240] Time: 16:03:05 Date: 07/17/10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.021369] NET: Registered protocol family 16 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.021830] ACPI: bus type pci registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.022052] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.022148] PCI: MCFG area at e0000000 reserved in E820 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.022238] PCI: Using MMCONFIG for extended config space Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.022327] PCI: Using configuration type 1 for base access Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.022708] khelper used greatest stack depth: 7216 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.028825] bio: create slab at 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.029712] ACPI: EC: Look up EC in DSDT Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.033281] ACPI: BIOS _OSI(Linux) query ignored Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.034261] ACPI: Interpreter enabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.034355] ACPI: (supports S0 S3 S4 S5) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.034588] ACPI: Using PIC for interrupt routing Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.086413] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.087066] ACPI: No dock devices found. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.087728] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.087938] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.087944] pci 0000:00:02.0: reg 14 io port: [0x5088-0x508f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.087950] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.087956] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088028] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088146] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088208] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088303] pci 0000:00:1b.0: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088479] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088574] pci 0000:00:1c.0: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088753] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.088846] pci 0000:00:1c.1: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089038] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089132] pci 0000:00:1c.2: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089312] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089406] pci 0000:00:1c.3: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089556] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089621] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089687] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089752] pci 0000:00:1d.3: reg 20 io port: [0x5400-0x541f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089822] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089885] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.089990] pci 0000:00:1d.7: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.090250] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.090391] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.090486] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.090626] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091063] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091072] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091081] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091090] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091098] pci 0000:00:1f.2: reg 20 io port: [0x5440-0x544f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091135] pci 0000:00:1f.2: PME# supported from D3hot Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.091226] pci 0000:00:1f.2: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092060] pci 0000:00:1f.3: reg 20 io port: [0x5420-0x543f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092155] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092161] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092369] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0000000-0xd000ffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092462] pci 0000:05:00.0: PME# supported from D3hot Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092556] pci 0000:05:00.0: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092720] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd00fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092770] pci 0000:06:01.0: reg 10 32bit mmio: [0xd0100000-0xd0101fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092828] pci 0000:06:01.0: supports D1 D2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092830] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.092998] pci 0000:06:01.0: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093134] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093163] pci 0000:06:04.0: supports D1 D2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093166] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093262] pci 0000:06:04.0: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093397] pci 0000:06:04.1: reg 10 32bit mmio: [0xd0103000-0xd010307f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093468] pci 0000:06:04.1: supports D1 D2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093470] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093566] pci 0000:06:04.1: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093700] pci 0000:06:04.2: reg 10 32bit mmio: [0xd0103400-0xd01034ff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093772] pci 0000:06:04.2: supports D1 D2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093774] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.093869] pci 0000:06:04.2: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094037] pci 0000:06:04.3: reg 10 32bit mmio: [0xd0103800-0xd010387f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094108] pci 0000:06:04.3: supports D1 D2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094111] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094205] pci 0000:06:04.3: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094340] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094412] pci 0000:06:04.4: supports D1 D2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094414] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094509] pci 0000:06:04.4: PME# disabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094658] pci 0000:00:1e.0: transparent bridge Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094752] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094812] pci_bus 0000:00: on NUMA node 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.094818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.095164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.095275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.095383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.095497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.095629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.100791] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.101290] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.101781] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.102337] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.102860] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.103482] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.104029] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.104520] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.105110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.105260] vgaarb: loaded Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.105535] SCSI subsystem initialized Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.105654] libata version 3.00 loaded. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.105848] usbcore: registered new interface driver usbfs Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.106004] usbcore: registered new interface driver hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.106141] usbcore: registered new device driver usb Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.106484] PCI: Using ACPI for IRQ routing Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.106573] pci 0000:00:1c.0: BAR 7: can't allocate resource Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.106664] pci 0000:00:1c.0: BAR 8: can't allocate resource Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107119] cfg80211: Using static regulatory domain info Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107211] cfg80211: Regulatory domain: US Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107297] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107436] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107529] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107622] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107717] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107810] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.107903] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108010] cfg80211: Calling CRDA for country: US Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108130] NetLabel: Initializing Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108216] NetLabel: domain hash size = 128 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108302] NetLabel: protocols = UNLABELED CIPSOv4 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108402] NetLabel: unlabeled traffic allowed by default Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.108792] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.109988] Switching to clocksource tsc Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.112920] pnp: PnP ACPI init Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.113046] ACPI: bus type pnp registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.136998] pnp: PnP ACPI: found 10 devices Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137086] ACPI: ACPI bus type pnp unregistered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137186] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137281] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137376] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137471] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137566] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137662] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137760] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137858] system 00:06: ioport range 0x800-0x80f has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.137962] system 00:06: ioport range 0x1000-0x107f has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.138055] system 00:06: ioport range 0x1180-0x11bf has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.138149] system 00:06: ioport range 0x1640-0x164f has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.138242] system 00:06: ioport range 0xfe00-0xfefe has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.138337] system 00:06: ioport range 0xff2c-0xff2f has been reserved Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173142] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173237] pci 0000:00:1c.0: IO window: 0x2000-0x2fff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173333] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173427] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173571] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173663] pci 0000:00:1c.1: IO window: 0x3000-0x3fff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173757] pci 0000:00:1c.1: MEM window: 0x44400000-0x445fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.173852] pci 0000:00:1c.1: PREFETCH window: 0x00000044600000-0x000000447fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174012] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174103] pci 0000:00:1c.2: IO window: 0x4000-0x4fff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174197] pci 0000:00:1c.2: MEM window: 0x44800000-0x449fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174292] pci 0000:00:1c.2: PREFETCH window: 0x00000044a00000-0x00000044bfffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174437] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174528] pci 0000:00:1c.3: IO window: 0x6000-0x6fff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174622] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd00fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174717] pci 0000:00:1c.3: PREFETCH window: 0x00000044c00000-0x00000044dfffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174874] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.174980] pci 0000:06:04.0: IO window: 0x007000-0x0070ff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175074] pci 0000:06:04.0: IO window: 0x007400-0x0074ff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175168] pci 0000:06:04.0: PREFETCH window: 0x40000000-0x43ffffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175264] pci 0000:06:04.0: MEM window: 0x48000000-0x4bffffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175359] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175452] pci 0000:00:1e.0: IO window: 0x7000-0x7fff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175547] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175641] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.175747] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176031] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176123] PCI: setting IRQ 11 as level-triggered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176130] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176275] pci 0000:00:1c.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176444] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176535] PCI: setting IRQ 6 as level-triggered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176542] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176685] pci 0000:00:1c.1: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176852] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176955] PCI: setting IRQ 10 as level-triggered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.176961] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177104] pci 0000:00:1c.2: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177274] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177366] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177509] pci 0000:00:1c.3: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177515] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177609] pci 0000:00:1e.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177623] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177768] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177771] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177775] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177778] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177782] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177785] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177788] pci_bus 0000:03: resource 1 mem: [0x44400000-0x445fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177792] pci_bus 0000:03: resource 2 pref mem [0x44600000-0x447fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177795] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177798] pci_bus 0000:04: resource 1 mem: [0x44800000-0x449fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177801] pci_bus 0000:04: resource 2 pref mem [0x44a00000-0x44bfffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177805] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177808] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd00fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177811] pci_bus 0000:05: resource 2 pref mem [0x44c00000-0x44dfffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177815] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177818] pci_bus 0000:06: resource 1 mem: [0xd0100000-0xd01fffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177821] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177824] pci_bus 0000:06: resource 3 io: [0x00-0xffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177827] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177831] pci_bus 0000:07: resource 0 io: [0x7000-0x70ff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177834] pci_bus 0000:07: resource 1 io: [0x7400-0x74ff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177837] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177841] pci_bus 0000:07: resource 3 mem: [0x48000000-0x4bffffff] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.177875] NET: Registered protocol family 2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.178060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.178462] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.179373] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.179676] TCP: Hash tables configured (established 131072 bind 65536) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.179768] TCP reno registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.179978] NET: Registered protocol family 1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180173] RPC: Registered udp transport module. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180263] RPC: Registered tcp transport module. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180351] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180453] pci 0000:00:02.0: Boot video device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180468] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180471] pci 0000:00:1d.0: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180490] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180492] pci 0000:00:1d.1: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180511] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180513] pci 0000:00:1d.2: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180531] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180534] pci 0000:00:1d.3: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.180725] Simple Boot Flag at 0x36 set to 0x1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.181457] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.181592] Microcode Update Driver: v2.00 , Peter Oruba Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.181732] Scanning for low memory corruption every 60 seconds Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.182202] audit: initializing netlink socket (disabled) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.182303] type=2000 audit(1279382585.181:1): initialized Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.194597] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.197812] VFS: Disk quotas dquot_6.5.2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.198007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.198883] NTFS driver 2.1.29 [Flags: R/O]. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.199284] msgmni has been set to 1762 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.199576] cryptomgr_test used greatest stack depth: 6980 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.200234] alg: No test for stdrng (krng) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.200454] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.200592] io scheduler noop registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.200678] io scheduler anticipatory registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.200767] io scheduler deadline registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.200926] io scheduler cfq registered (default) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.201194] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.201396] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.201589] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.201784] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.202011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.205768] Non-volatile memory driver v1.3 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.205891] intel_rng: FWH not detected Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.206000] Linux agpgart interface v0.103 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.206101] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.206467] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.209290] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.213977] ACPI: AC Adapter [ACAD] (on-line) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.214234] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.214418] ACPI: Lid Switch [LID] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.214583] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.214727] ACPI: Sleep Button [SLPB] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.214893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.215049] ACPI: Power Button [PWRB] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.215231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.215369] ACPI: Power Button [PWRF] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.215855] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.216025] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.216924] Marking TSC unstable due to TSC halts in idle Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.217133] Switching to clocksource hpet Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.217244] processor LNXCPU:00: registered as cooling_device0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.246832] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.246976] thermal LNXTHERM:01: registered as thermal_zone0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.247092] ACPI: Thermal Zone [TZ00] (52 C) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.258074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.258173] ACPI: Thermal Zone [TZ01] (52 C) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.258365] [drm] Initialized drm 1.1.0 20060810 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.258472] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.259599] i915 0000:00:02.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.262313] [drm] set up 7M of stolen space Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.696454] ACPI: Battery Slot [BAT1] (battery absent) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 0.857609] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.085542] [drm] LVDS-8: set mode 1280x800 1d Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.125473] Console: switching to colour frame buffer device 160x50 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.130914] fb0: inteldrmfb frame buffer device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.130957] registered panic notifier Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.130999] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.131142] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.133615] brd: module loaded Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.134639] loop: module loaded Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.134753] input: Macintosh mouse button emulation as /devices/virtual/input/input5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.135210] ata_piix 0000:00:1f.2: version 2.13 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.135234] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.135317] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.286041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.286109] scsi0 : ata_piix Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.286284] scsi1 : ata_piix Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.287518] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.287586] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288182] console [netcon0] enabled Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288220] netconsole: network logging started Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288451] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288650] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288705] PCI: setting IRQ 5 as level-triggered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288712] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288803] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288807] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288869] drivers/usb/core/inode.c: creating file 'devices' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288874] drivers/usb/core/inode.c: creating file '001' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.288944] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.289049] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.289055] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.289074] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.289144] ehci_hcd 0000:00:1d.7: debug port 1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.289191] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.293081] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.293084] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.293097] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.293154] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.297046] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.303026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.304303] usb usb1: default language 0x0409 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.304311] usb usb1: udev 1, busnum 1, minor = 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.304313] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.305601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.306923] usb usb1: Product: EHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.308269] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.309668] usb usb1: SerialNumber: 0000:00:1d.7 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.311128] usb usb1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.311168] usb usb1: usb_probe_device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.311172] usb usb1: configuration #1 chosen from 1 choice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.312636] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.312653] usb 1-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.312695] hub 1-0:1.0: usb_probe_interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.312698] hub 1-0:1.0: usb_probe_interface - got id Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.312700] hub 1-0:1.0: USB hub found Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.314193] hub 1-0:1.0: 8 ports detected Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315704] hub 1-0:1.0: standalone hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315706] hub 1-0:1.0: no power switching (usb 1.0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315709] hub 1-0:1.0: individual port over-current protection Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315712] hub 1-0:1.0: power on to power good time: 20ms Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315717] hub 1-0:1.0: local power source is good Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315720] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315760] drivers/usb/core/inode.c: creating file '001' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.315820] uhci_hcd: USB Universal Host Controller Interface driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.317454] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.319102] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.319106] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.320770] drivers/usb/core/inode.c: creating file '002' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.320826] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.322550] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.324278] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.324280] uhci_hcd 0000:00:1d.0: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.324297] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.324308] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.326125] usb usb2: default language 0x0409 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.326132] usb usb2: udev 1, busnum 2, minor = 128 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.326135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.327958] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.329832] usb usb2: Product: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.331709] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.333634] usb usb2: SerialNumber: 0000:00:1d.0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.335588] usb usb2: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.335627] usb usb2: usb_probe_device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.335630] usb usb2: configuration #1 chosen from 1 choice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.337545] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.337562] usb 2-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.337598] hub 2-0:1.0: usb_probe_interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.337601] hub 2-0:1.0: usb_probe_interface - got id Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.337603] hub 2-0:1.0: USB hub found Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.339505] hub 2-0:1.0: 2 ports detected Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341409] hub 2-0:1.0: standalone hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341411] hub 2-0:1.0: no power switching (usb 1.0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341413] hub 2-0:1.0: individual port over-current protection Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341416] hub 2-0:1.0: power on to power good time: 2ms Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341421] hub 2-0:1.0: local power source is good Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341423] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341442] drivers/usb/core/inode.c: creating file '001' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.341477] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.343417] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.343421] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.345324] drivers/usb/core/inode.c: creating file '003' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.345381] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.347296] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.349199] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.349202] uhci_hcd 0000:00:1d.1: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.349219] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.349231] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.351146] usb usb3: default language 0x0409 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.351153] usb usb3: udev 1, busnum 3, minor = 256 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.351156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.353033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.354915] usb usb3: Product: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.356784] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.358682] usb usb3: SerialNumber: 0000:00:1d.1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.360590] usb usb3: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.360629] usb usb3: usb_probe_device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.360632] usb usb3: configuration #1 chosen from 1 choice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.362531] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.362547] usb 3-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.362584] hub 3-0:1.0: usb_probe_interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.362586] hub 3-0:1.0: usb_probe_interface - got id Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.362589] hub 3-0:1.0: USB hub found Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.364466] hub 3-0:1.0: 2 ports detected Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366323] hub 3-0:1.0: standalone hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366325] hub 3-0:1.0: no power switching (usb 1.0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366327] hub 3-0:1.0: individual port over-current protection Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366330] hub 3-0:1.0: power on to power good time: 2ms Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366335] hub 3-0:1.0: local power source is good Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366337] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366356] drivers/usb/core/inode.c: creating file '001' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.366391] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.368304] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.368308] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.370196] drivers/usb/core/inode.c: creating file '004' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.370251] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.372137] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.373986] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.373988] uhci_hcd 0000:00:1d.2: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.374023] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.374035] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.375914] usb usb4: default language 0x0409 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.375922] usb usb4: udev 1, busnum 4, minor = 384 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.375925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.377787] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.379683] usb usb4: Product: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.381569] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.383478] usb usb4: SerialNumber: 0000:00:1d.2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.385399] usb usb4: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.385438] usb usb4: usb_probe_device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.385442] usb usb4: configuration #1 chosen from 1 choice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.387335] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.387354] usb 4-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.387391] hub 4-0:1.0: usb_probe_interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.387393] hub 4-0:1.0: usb_probe_interface - got id Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.387396] hub 4-0:1.0: USB hub found Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.389276] hub 4-0:1.0: 2 ports detected Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391130] hub 4-0:1.0: standalone hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391132] hub 4-0:1.0: no power switching (usb 1.0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391134] hub 4-0:1.0: individual port over-current protection Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391137] hub 4-0:1.0: power on to power good time: 2ms Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391142] hub 4-0:1.0: local power source is good Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391144] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391160] drivers/usb/core/inode.c: creating file '001' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.391194] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.393109] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.393113] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.395019] drivers/usb/core/inode.c: creating file '005' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.395078] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.396998] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.398906] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.398908] uhci_hcd 0000:00:1d.3: Performing full reset Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.398925] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.398936] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.400890] usb usb5: default language 0x0409 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.400897] usb usb5: udev 1, busnum 5, minor = 512 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.400900] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.402807] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.404717] usb usb5: Product: UHCI Host Controller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.406618] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.408511] usb usb5: SerialNumber: 0000:00:1d.3 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.410444] usb usb5: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.410482] usb usb5: usb_probe_device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.410485] usb usb5: configuration #1 chosen from 1 choice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.412375] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.412393] usb 5-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.412431] hub 5-0:1.0: usb_probe_interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.412434] hub 5-0:1.0: usb_probe_interface - got id Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.412437] hub 5-0:1.0: USB hub found Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.414322] hub 5-0:1.0: 2 ports detected Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416189] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416193] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416206] hub 5-0:1.0: standalone hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416208] hub 5-0:1.0: no power switching (usb 1.0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416211] hub 5-0:1.0: individual port over-current protection Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416213] hub 5-0:1.0: power on to power good time: 2ms Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416218] hub 5-0:1.0: local power source is good Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416220] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416236] drivers/usb/core/inode.c: creating file '001' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.416305] Initializing USB Mass Storage driver... Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.418233] usbcore: registered new interface driver usb-storage Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.420107] USB Mass Storage support registered. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.422078] usbcore: registered new interface driver libusual Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.424079] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.429901] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.431887] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.433799] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.435749] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.437658] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.439901] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.441753] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.441953] mice: PS/2 mouse device common for all mice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.444394] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.446223] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.448756] rtc_cmos 00:07: RTC can wake from S4 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.450714] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.452999] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.454972] ata1.00: configured for UDMA/100 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.456950] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.458973] i2c /dev entries driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.461034] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.463372] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.465570] sd 0:0:0:0: [sda] Write Protect is off Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.467536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.467593] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.467746] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.470118] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.472347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.474629] sda: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.474919] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.479396] cpuidle: using governor ladder Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.481755] cpuidle: using governor menu Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.485137] usbcore: registered new interface driver hiddev Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.487317] usbcore: registered new interface driver usbhid Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.489316] usbhid: v2.6:USB HID core driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.491333] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.491422] GACT probability on Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.493384] Mirror/redirect action on Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.495622] netem: version 1.2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.497585] u32 classifier Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.499485] Performance counters on Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.501425] input device check on Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.503322] Actions configured Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.505181] Netfilter messages via NETLINK v0.30. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.507305] sda1 sda2 sda3 sda4 < Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.507496] ata2.00: configured for UDMA/33 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.511283] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.513556] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.515558] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.517515] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.519556] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.519596] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.519604] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.519614] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.519907] ctnetlink v0.93: registering with nfnetlink. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.521941] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.523957] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.525934] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.528189] xt_time: kernel timezone is -0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.530691] IPv4 over IPv4 tunneling driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.533204] GRE over IPv4 tunneling driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.535356] sda5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.536232] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.540451] ClusterIP Version 0.8 loaded successfully Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.542624] sda6 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.542750] arp_tables: (C) 2002 David S. Miller Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.546929] TCP bic registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.548918] TCP cubic registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.550899] TCP westwood registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.552808] TCP highspeed registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.554698] TCP hybla registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.556527] TCP htcp registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.558328] TCP vegas registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.560084] TCP veno registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.561819] TCP scalable registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.563523] TCP lp registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.565193] TCP yeah registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.566831] TCP illinois registered Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.568403] Initializing XFRM netlink socket Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.569968] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.571543] Uniform CD-ROM driver Revision: 3.20 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.573153] sda7 > Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.574751] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.574776] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.575206] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.575387] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.577389] sd 0:0:0:0: [sda] Attached SCSI disk Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.579048] NET: Registered protocol family 17 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.580781] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.582631] PM: Resume from disk failed. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.582647] registered taskstats version 1 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.584838] Magic number: 2:493:85 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.619069] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.620037] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.620047] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.620055] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.724066] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.826063] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.968908] usb 5-1: skipped 1 descriptor after interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.973904] usb 5-1: default language 0x0409 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.991904] usb 5-1: udev 2, busnum 5, minor = 513 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.991906] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.993664] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.995438] usb 5-1: Product: Compact Optical Mouse 500 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.997208] usb 5-1: Manufacturer: Microsoft Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.999048] usb 5-1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.999099] usb 5-1: usb_probe_device Jul 17 16:03:24 OnlyTux-Poland kernel: [ 1.999103] usb 5-1: configuration #1 chosen from 1 choice Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.013903] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.013920] usb 5-1:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.013970] usbhid 5-1:1.0: usb_probe_interface Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.013973] usbhid 5-1:1.0: usb_probe_interface - got id Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.028286] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.030319] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.032302] drivers/usb/core/inode.c: creating file '002' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.110895] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.143360] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.148263] EXT3-fs: INFO: recovery required on readonly filesystem. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.150218] EXT3-fs: write access will be enabled during recovery. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.356067] kjournald starting. Commit interval 5 seconds Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.357996] EXT3-fs: recovery complete. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.360336] EXT3-fs: mounted filesystem with writeback data mode. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.362228] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.364145] Freeing unused kernel memory: 316k freed Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.366212] Write protecting the kernel text: 3548k Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.368153] Write protecting the kernel read-only data: 1700k Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.454048] usb usb2: suspend_rh (auto-stop) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.454075] usb usb3: suspend_rh (auto-stop) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.454100] usb usb4: suspend_rh (auto-stop) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.474047] async/0 used greatest stack depth: 6660 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 2.577051] async/1 used greatest stack depth: 6600 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.623045] stty used greatest stack depth: 6444 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704062] hub 2-0:1.0: hub_suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704071] usb usb2: bus auto-suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704074] usb usb2: suspend_rh Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704093] hub 3-0:1.0: hub_suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704096] usb usb3: bus auto-suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704098] usb usb3: suspend_rh Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704115] hub 4-0:1.0: hub_suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704119] usb usb4: bus auto-suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704121] usb usb4: suspend_rh Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704139] hub 1-0:1.0: hub_suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704141] usb usb1: bus auto-suspend Jul 17 16:03:24 OnlyTux-Poland kernel: [ 3.704145] ehci_hcd 0000:00:1d.7: suspend root hub Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.926752] udev: starting version 149 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.945527] usb usb2: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.945661] usb 2-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.946080] usb usb3: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.946217] usb 3-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.961776] usb usb4: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.961796] usb 4-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.961850] usb usb5: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.961868] usb 5-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.961890] usb 5-1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.961909] usb 5-1:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.962109] usb usb1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 4.962127] usb 1-0:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.231629] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.231636] ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI region SMBI [0x5420-0x542f] Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.231639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.264742] usb usb3: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.265372] usb usb4: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.266763] usb usb5: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.268447] usb usb1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.276476] usb usb2: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.278651] usb 5-1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.283902] usb 5-1:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.284000] usb 5-1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.284755] usb 5-1:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.284844] usb 5-1: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.518645] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.518652] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.518665] b44 0000:06:01.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.537634] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.537648] ath5k 0000:05:00.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 5.537681] ath5k 0000:05:00.0: registered as 'phy0' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.051942] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.051967] b44.c:v2.0 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.057573] ath: EEPROM regdomain: 0x65 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.057575] ath: EEPROM indicates we should expect a direct regpair map Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.057580] ath: Country alpha2 being used: 00 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.057582] ath: Regpair used: 0x65 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.060347] phy0: Selected rate control algorithm 'minstrel' Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.060796] Registered led device: ath5k-phy0::rx Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.060813] Registered led device: ath5k-phy0::tx Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.060816] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.061661] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.067130] usb 5-1:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.067977] usb 5-1:1.0: uevent Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.087830] sdhci: Secure Digital Host Controller Interface driver Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.087834] sdhci: Copyright(c) Pierre Ossman Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117328] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117346] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117359] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117473] Registered led device: mmc0:: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117535] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117554] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117569] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117577] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117756] Registered led device: mmc1:: Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.117894] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.933749] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.933755] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 6.933788] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 17 16:03:24 OnlyTux-Poland kernel: [ 7.375706] lvm used greatest stack depth: 6324 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 7.668688] EXT3 FS on sda6, internal journal Jul 17 16:03:24 OnlyTux-Poland kernel: [ 9.934300] blkid used greatest stack depth: 6220 bytes left Jul 17 16:03:24 OnlyTux-Poland kernel: [ 10.428741] kjournald starting. Commit interval 5 seconds Jul 17 16:03:24 OnlyTux-Poland kernel: [ 10.429025] EXT3 FS on sda7, internal journal Jul 17 16:03:24 OnlyTux-Poland kernel: [ 10.429030] EXT3-fs: mounted filesystem with writeback data mode. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 10.483938] NTFS volume version 3.1. Jul 17 16:03:24 OnlyTux-Poland kernel: [ 10.583191] Adding 795176k swap on /dev/sda5. Priority:-1 extents:1 across:795176k Jul 17 16:03:24 OnlyTux-Poland acpid: starting up with proc fs Jul 17 16:03:24 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 17 16:03:24 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 17 16:03:24 OnlyTux-Poland acpid: 1 rule loaded Jul 17 16:03:24 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 17 16:03:25 OnlyTux-Poland acpid: client connected from 3197[0:0] Jul 17 16:03:25 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 16:03:25 OnlyTux-Poland /usr/sbin/gpm[3258]: *** info [daemon/startup.c(136)]: Jul 17 16:03:25 OnlyTux-Poland /usr/sbin/gpm[3258]: Started gpm successfully. Entered daemon mode. Jul 17 16:03:25 OnlyTux-Poland kernel: [ 20.662860] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:03:25 OnlyTux-Poland /usr/sbin/gpm[3258]: *** info [mice.c(1988)]: Jul 17 16:03:25 OnlyTux-Poland /usr/sbin/gpm[3258]: imps2: Auto-detected intellimouse PS/2 Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.550196] usb usb2: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.550338] usb 2-0:1.0: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.550562] usb usb3: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.550696] usb 3-0:1.0: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.550916] usb usb4: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.551499] usb 4-0:1.0: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.551734] usb usb5: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.551873] usb 5-0:1.0: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.551955] usb 5-1: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.552353] usb 5-1:1.0: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.553300] usb usb1: uevent Jul 17 16:03:27 OnlyTux-Poland kernel: [ 22.553438] usb 1-0:1.0: uevent Jul 17 16:03:28 OnlyTux-Poland acpid: client connected from 3525[102:1002] Jul 17 16:03:28 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 16:03:29 OnlyTux-Poland dhcpcd[4045]: eth0: dhcpcd 4.0.15 starting Jul 17 16:03:29 OnlyTux-Poland dhcpcd[4045]: eth0: broadcasting for a lease Jul 17 16:03:32 OnlyTux-Poland kernel: [ 27.704213] b44: eth0: Link is up at 100 Mbps, full duplex. Jul 17 16:03:32 OnlyTux-Poland kernel: [ 27.704217] b44: eth0: Flow control is off for TX and off for RX. Jul 17 16:03:33 OnlyTux-Poland dhcpcd[4045]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 17 16:03:33 OnlyTux-Poland dhcpcd[4045]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 17 16:03:33 OnlyTux-Poland dhcpcd[4045]: eth0: checking 192.168.1.4 is available on attached networks Jul 17 16:03:37 OnlyTux-Poland dhcpcd[4045]: eth0: leased 192.168.1.4 for 604800 seconds Jul 17 16:03:38 OnlyTux-Poland cron[4257]: (CRON) STARTUP (V5.0) Jul 17 16:03:44 OnlyTux-Poland login[4324]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 17 16:05:10 OnlyTux-Poland su[4352]: Successful su for root by onlyus Jul 17 16:05:10 OnlyTux-Poland su[4352]: + /dev/tty1 onlyus:root Jul 17 16:05:10 OnlyTux-Poland su[4352]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 17 16:05:34 OnlyTux-Poland kernel: [ 148.923252] emerge used greatest stack depth: 5852 bytes left Jul 17 16:05:54 OnlyTux-Poland login[4325]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 17 16:05:54 OnlyTux-Poland login[4402]: ROOT LOGIN on '/dev/tty2' Jul 17 16:07:19 OnlyTux-Poland kernel: [ 254.526503] netselect used greatest stack depth: 5644 bytes left Jul 17 16:07:27 OnlyTux-Poland login[4326]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 17 16:07:29 OnlyTux-Poland acpid: client connected from 4472[0:1000] Jul 17 16:07:29 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 16:07:30 OnlyTux-Poland kernel: [ 264.963128] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:30 OnlyTux-Poland kernel: [ 265.104815] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:30 OnlyTux-Poland kernel: [ 265.383347] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:30 OnlyTux-Poland kernel: [ 265.524801] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:33 OnlyTux-Poland kernel: [ 268.516303] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:33 OnlyTux-Poland kernel: [ 268.658195] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:34 OnlyTux-Poland kernel: [ 268.938775] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:34 OnlyTux-Poland kernel: [ 269.081883] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:07:54 OnlyTux-Poland kernel: [ 289.304975] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 17 16:08:21 OnlyTux-Poland kernel: [ 316.731668] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:23 OnlyTux-Poland kernel: [ 318.167578] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:23 OnlyTux-Poland /usr/sbin/gpm[3258]: *** info [mice.c(1988)]: Jul 17 16:08:23 OnlyTux-Poland /usr/sbin/gpm[3258]: imps2: Auto-detected intellimouse PS/2 Jul 17 16:08:28 OnlyTux-Poland acpid: client 4472[0:1000] has disconnected Jul 17 16:08:28 OnlyTux-Poland acpid: client connected from 4472[0:1000] Jul 17 16:08:28 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 16:08:28 OnlyTux-Poland kernel: [ 323.730421] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:28 OnlyTux-Poland kernel: [ 323.770235] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:08:29 OnlyTux-Poland kernel: [ 323.912174] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:08:29 OnlyTux-Poland kernel: [ 324.118643] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:30 OnlyTux-Poland kernel: [ 324.888405] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:30 OnlyTux-Poland kernel: [ 325.790852] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:31 OnlyTux-Poland /usr/sbin/gpm[3258]: *** info [mice.c(1988)]: Jul 17 16:08:31 OnlyTux-Poland /usr/sbin/gpm[3258]: imps2: Auto-detected intellimouse PS/2 Jul 17 16:08:31 OnlyTux-Poland acpid: client 4472[0:1000] has disconnected Jul 17 16:08:31 OnlyTux-Poland acpid: client connected from 4472[0:1000] Jul 17 16:08:31 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 16:08:32 OnlyTux-Poland kernel: [ 326.991273] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:08:32 OnlyTux-Poland kernel: [ 327.093310] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:08:32 OnlyTux-Poland kernel: [ 327.133324] [drm] TV-14: set mode NTSC 480i 0 Jul 17 16:08:32 OnlyTux-Poland kernel: [ 327.339699] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:09:10 OnlyTux-Poland kernel: [ 365.594978] netselect used greatest stack depth: 5624 bytes left Jul 17 16:09:53 OnlyTux-Poland kernel: [ 408.791688] netselect used greatest stack depth: 5464 bytes left Jul 17 16:10:01 OnlyTux-Poland cron[4701]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 16:12:18 OnlyTux-Poland su[4811]: Successful su for root by onlyus Jul 17 16:12:18 OnlyTux-Poland su[4811]: + /dev/pts/1 onlyus:root Jul 17 16:12:18 OnlyTux-Poland su[4811]: pam_unix(su:session): session opened for user root by onlyus(uid=1000) Jul 17 16:13:48 OnlyTux-Poland kernel: [ 643.632077] netselect used greatest stack depth: 5376 bytes left Jul 17 16:19:16 OnlyTux-Poland kernel: [ 971.578316] firefox used greatest stack depth: 5360 bytes left Jul 17 16:19:18 OnlyTux-Poland su[4811]: pam_unix(su:session): session closed for user root Jul 17 16:19:25 OnlyTux-Poland shutdown[4912]: shutting down for system halt Jul 17 16:19:25 OnlyTux-Poland init: Switching to runlevel: 0 Jul 17 16:19:25 OnlyTux-Poland kernel: [ 979.998082] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:19:25 OnlyTux-Poland su[4352]: pam_unix(su:session): session closed for user root Jul 17 16:19:25 OnlyTux-Poland kernel: [ 980.095470] wget[4400]: segfault at 3c3ae66 ip b75663b0 sp bfcfcf5c error 4 in libc-2.11.2.so[b7526000+140000] Jul 17 16:19:25 OnlyTux-Poland kernel: [ 980.095645] wget used greatest stack depth: 5260 bytes left Jul 17 16:19:26 OnlyTux-Poland kernel: [ 981.209079] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:19:26 OnlyTux-Poland /usr/sbin/gpm[3258]: *** info [mice.c(1988)]: Jul 17 16:19:26 OnlyTux-Poland /usr/sbin/gpm[3258]: imps2: Auto-detected intellimouse PS/2 Jul 17 16:19:29 OnlyTux-Poland dhcpcd[4052]: eth0: received SIGTERM, stopping Jul 17 16:19:29 OnlyTux-Poland kernel: [ 984.137226] b44: eth0: powering down PHY Jul 17 16:19:30 OnlyTux-Poland kernel: [ 985.629933] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 16:19:32 OnlyTux-Poland acpid: exiting Jul 17 16:19:33 OnlyTux-Poland syslog-ng[3019]: Termination requested via signal, terminating; Jul 17 16:19:33 OnlyTux-Poland syslog-ng[3019]: syslog-ng shutting down; version='3.1.1' Jul 17 20:25:18 OnlyTux-Poland syslog-ng[2947]: syslog-ng starting up; version='3.1.1' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Tue Jul 13 17:24:38 CEST 2010 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558ac4, node_mem_map c165b300 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369da0 - 0xc1564ba4 (2027 kB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369da0 (3495 kB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.000000] Detected 1728.934 MHz processor. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.86 BogoMIPS (lpj=1728934) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.001291] Security Framework initialized Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.001430] SELinux: Initializing. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.001569] SELinux: Starting in permissive mode Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.001575] Mount-cache hash table entries: 512 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.002104] Initializing cgroup subsys ns Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.002242] Initializing cgroup subsys cpuacct Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.002379] Initializing cgroup subsys freezer Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.002515] Initializing cgroup subsys net_cls Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.002671] mce: CPU supports 6 MCE banks Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.002813] using mwait in idle threads. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003009] Performance Events: Core events, core PMU driver. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003215] ... version: 1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003349] ... bit width: 40 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003485] ... generic registers: 2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003619] ... value mask: 000000ffffffffff Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003757] ... max period: 000000007fffffff Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.003894] ... fixed-purpose events: 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.004002] ... event mask: 0000000000000003 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.004141] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.004350] Checking 'hlt' instruction... OK. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.008598] ACPI: Core revision 20100121 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.020909] ACPI: setting ELCR to 0200 (from 0c60) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.022349] khelper used greatest stack depth: 7296 bytes left Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.022735] Time: 20:24:59 Date: 07/17/10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.022901] NET: Registered protocol family 16 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.023393] ACPI: bus type pci registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.023648] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.024013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.024153] PCI: Using MMCONFIG for extended config space Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.024290] PCI: Using configuration type 1 for base access Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.024719] khelper used greatest stack depth: 7260 bytes left Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.030339] bio: create slab at 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.031728] ACPI: EC: Look up EC in DSDT Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.035457] ACPI: BIOS _OSI(Linux) query ignored Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.036413] ACPI: Interpreter enabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.036559] ACPI: (supports S0 S3 S4 S5) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.036840] ACPI: Using PIC for interrupt routing Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.089575] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.090305] ACPI: No dock devices found. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.091006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.091845] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093320] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093323] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093327] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093331] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093334] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093338] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093341] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093407] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093413] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093418] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093424] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093462] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093568] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093631] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093636] pci 0000:00:1b.0: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093739] pci 0000:00:1c.0: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093838] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093843] pci 0000:00:1c.1: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093942] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.093948] pci 0000:00:1c.2: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094059] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094064] pci 0000:00:1c.3: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094127] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094191] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094255] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094318] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094378] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094441] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094448] pci 0000:00:1d.7: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094610] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094848] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.094991] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095307] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095316] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095324] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095333] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095341] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095378] pci 0000:00:1f.2: PME# supported from D3hot Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095383] pci 0000:00:1f.2: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095444] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095539] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095680] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095686] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095695] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.095757] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096017] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096023] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096032] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096094] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096234] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096240] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096249] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096357] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096449] pci 0000:05:00.0: PME# supported from D3hot Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096456] pci 0000:05:00.0: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096484] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096624] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096630] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096639] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096701] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096758] pci 0000:06:01.0: supports D1 D2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096761] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096767] pci 0000:06:01.0: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096812] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096840] pci 0000:06:04.0: supports D1 D2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096842] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.096848] pci 0000:06:04.0: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097037] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097108] pci 0000:06:04.1: supports D1 D2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097110] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097117] pci 0000:06:04.1: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097160] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097230] pci 0000:06:04.2: supports D1 D2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097233] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097239] pci 0000:06:04.2: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097282] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097353] pci 0000:06:04.3: supports D1 D2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097355] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097361] pci 0000:06:04.3: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097405] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097476] pci 0000:06:04.4: supports D1 D2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097478] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097484] pci 0000:06:04.4: PME# disabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097550] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097695] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097701] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097709] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097713] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097719] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.097775] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098035] pci_bus 0000:00: on NUMA node 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.098873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.104356] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.104905] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.105458] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.106064] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.106633] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.107242] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.107813] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.108480] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.109091] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.109336] vgaarb: loaded Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.109652] SCSI subsystem initialized Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.109818] libata version 3.00 loaded. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.110019] usbcore: registered new interface driver usbfs Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.110204] usbcore: registered new interface driver hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.110391] usbcore: registered new device driver usb Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.110780] PCI: Using ACPI for IRQ routing Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.110916] PCI: pci_cache_line_size set to 64 bytes Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111047] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111051] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111296] cfg80211: Calling CRDA to update world regulatory domain Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111482] NetLabel: Initializing Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111615] NetLabel: domain hash size = 128 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111748] NetLabel: protocols = UNLABELED CIPSOv4 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.111895] NetLabel: unlabeled traffic allowed by default Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.112102] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.112371] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.114015] Switching to clocksource tsc Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.116180] pnp: PnP ACPI init Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.116348] ACPI: bus type pnp registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.140332] pnp: PnP ACPI: found 10 devices Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.140467] ACPI: ACPI bus type pnp unregistered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.140613] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.140753] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.140894] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141035] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141177] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141330] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141475] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141619] system 00:06: [io 0x0800-0x080f] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141758] system 00:06: [io 0x1000-0x107f] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.141897] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.142037] system 00:06: [io 0x1640-0x164f] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.142176] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.142327] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.177174] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.177423] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.177565] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.177800] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.177941] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.178177] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.178330] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.178566] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.178800] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.178941] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179081] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179221] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179372] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179513] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179651] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179794] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.179939] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.180178] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.180328] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.180471] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.180614] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.180851] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.180986] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.181129] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.181283] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.181523] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.181661] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.181804] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.181948] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.182191] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.182442] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.182583] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.182729] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.182969] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.183109] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.183248] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.183404] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.183643] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.183781] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.183925] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.184069] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.184316] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.184460] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.184599] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.184743] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.184886] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.185133] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.185462] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.185601] PCI: setting IRQ 11 as level-triggered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.185608] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.185848] pci 0000:00:1c.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186020] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186159] PCI: setting IRQ 6 as level-triggered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186166] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186416] pci 0000:00:1c.1: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186589] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186728] PCI: setting IRQ 10 as level-triggered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186734] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.186973] pci 0000:00:1c.2: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187142] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187294] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187532] pci 0000:00:1c.3: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187538] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187680] pci 0000:00:1e.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187694] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187934] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187937] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187940] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187943] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187947] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187950] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187953] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187957] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187960] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187963] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187966] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187969] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187972] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187976] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187979] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187982] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187985] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187988] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187991] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187995] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.187997] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.188001] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.188004] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.188029] NET: Registered protocol family 2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.188213] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.188594] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.189599] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.189948] TCP: Hash tables configured (established 131072 bind 65536) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.190090] TCP reno registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.190224] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.190384] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.190613] NET: Registered protocol family 1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.190859] RPC: Registered udp transport module. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.190996] RPC: Registered tcp transport module. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191131] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191309] pci 0000:00:02.0: Boot video device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191332] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191334] pci 0000:00:1d.0: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191354] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191357] pci 0000:00:1d.1: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191378] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191381] pci 0000:00:1d.2: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191401] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191403] pci 0000:00:1d.3: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191467] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.191614] Simple Boot Flag at 0x36 set to 0x1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.192394] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.192578] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.192815] Scanning for low memory corruption every 60 seconds Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.193370] audit: initializing netlink socket (disabled) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.193523] type=2000 audit(1279398299.193:1): initialized Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.225388] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.228690] VFS: Disk quotas dquot_6.5.2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.228902] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.229926] msgmni has been set to 1762 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.230164] SELinux: Registering netfilter hooks Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.230365] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.231249] alg: No test for stdrng (krng) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.231580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.231815] io scheduler noop registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.231950] io scheduler deadline registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.232099] io scheduler cfq registered (default) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.232387] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.232566] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.232742] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.232916] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.233163] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.237006] Non-volatile memory driver v1.3 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.237171] intel_rng: FWH not detected Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.237332] Linux agpgart interface v0.103 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.237482] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.237938] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.240808] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.243245] ACPI: AC Adapter [ACAD] (on-line) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.243569] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.243850] ACPI: Lid Switch [LID] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.244064] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.244323] ACPI: Sleep Button [SLPB] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.247196] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.247447] ACPI: Power Button [PWRB] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.247675] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.247911] ACPI: Power Button [PWRF] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.248472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.248712] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.249379] Marking TSC unstable due to TSC halts in idle Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.249612] Switching to clocksource hpet Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.276030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.276221] thermal LNXTHERM:01: registered as thermal_zone0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.276463] ACPI: Thermal Zone [TZ00] (36 C) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.287074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.287221] ACPI: Thermal Zone [TZ01] (36 C) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.287464] [drm] Initialized drm 1.1.0 20060810 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.287619] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.287858] i915 0000:00:02.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.290639] [drm] set up 7M of stolen space Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.394304] [drm] initialized overlay support Jul 17 20:25:18 OnlyTux-Poland kernel: [ 0.666069] ACPI: Battery Slot [BAT1] (battery absent) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.088831] Console: switching to colour frame buffer device 160x50 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.094228] fb0: inteldrmfb frame buffer device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.094272] registered panic notifier Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.094313] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.094437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.097066] brd: module loaded Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.098149] loop: module loaded Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.098526] ata_piix 0000:00:1f.2: version 2.13 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.098549] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.098631] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.249041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.249108] scsi0 : ata_piix Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.249267] scsi1 : ata_piix Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.250537] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.250604] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.251205] console [netcon0] enabled Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.251244] netconsole: network logging started Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.251347] usbcore: registered new interface driver libusual Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.251501] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253167] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253299] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253349] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253433] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253484] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253534] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.253764] mice: PS/2 mouse device common for all mice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.254342] rtc_cmos 00:07: RTC can wake from S4 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.254454] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.255683] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.256951] i2c /dev entries driver Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.258613] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.260237] cpuidle: using governor ladder Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.261732] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.263693] cpuidle: using governor menu Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.266430] usbcore: registered new interface driver hiddev Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.268219] usbcore: registered new interface driver usbhid Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.269762] usbhid: USB HID core driver Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.271625] GACT probability on Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.273212] Mirror/redirect action on Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.274826] Simple TC action Loaded Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.276694] netem: version 1.2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.278355] u32 classifier Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.280031] Performance counters on Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.281725] input device check on Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.283437] Actions configured Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.285170] Netfilter messages via NETLINK v0.30. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.286978] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.288965] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.290792] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.292627] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.294613] ctnetlink v0.93: registering with nfnetlink. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.296443] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.298302] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.300184] xt_time: kernel timezone is -0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.302607] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.304465] ClusterIP Version 0.8 loaded successfully Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.306323] arp_tables: (C) 2002 David S. Miller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.308188] TCP cubic registered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.310033] Initializing XFRM netlink socket Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.311873] NET: Registered protocol family 17 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.313784] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.315827] PM: Resume from disk failed. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.315845] registered taskstats version 1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.318113] Magic number: 2:779:447 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.404552] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.406394] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.411515] ata1.00: configured for UDMA/100 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.413464] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.415710] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.417699] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.419788] sd 0:0:0:0: [sda] Write Protect is off Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.421764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.421812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.423973] sda: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.427420] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.439697] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.472329] ata2.00: configured for UDMA/33 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.479912] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.489310] sda7 > Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.492062] sd 0:0:0:0: [sda] Attached SCSI disk Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.494103] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.496090] Uniform CD-ROM driver Revision: 3.20 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.498226] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.498332] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.871660] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.904353] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.940433] kjournald starting. Commit interval 5 seconds Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.942576] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.944765] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.946965] Freeing unused kernel memory: 328k freed Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.949337] Write protecting the kernel text: 3496k Jul 17 20:25:18 OnlyTux-Poland kernel: [ 1.951594] Write protecting the kernel read-only data: 1704k Jul 17 20:25:18 OnlyTux-Poland kernel: [ 2.421049] async/0 used greatest stack depth: 6544 bytes left Jul 17 20:25:18 OnlyTux-Poland kernel: [ 3.240723] stty used greatest stack depth: 6364 bytes left Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.600139] udev: starting version 149 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.875230] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.875237] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.875240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881387] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881392] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881644] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881647] PCI: setting IRQ 5 as level-triggered Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881655] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881676] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881681] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881701] drivers/usb/core/inode.c: creating file 'devices' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881706] drivers/usb/core/inode.c: creating file '001' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881710] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881721] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881726] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881744] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881757] ehci_hcd 0000:00:1d.7: debug port 1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.881762] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.885657] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.885660] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.886174] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.886181] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.890080] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896087] usb usb1: default language 0x0409 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896094] usb usb1: udev 1, busnum 1, minor = 0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896104] usb usb1: Product: EHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896106] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896109] usb usb1: SerialNumber: 0000:00:1d.7 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896240] usb usb1: usb_probe_device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896244] usb usb1: configuration #1 chosen from 1 choice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896253] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896317] hub 1-0:1.0: usb_probe_interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896320] hub 1-0:1.0: usb_probe_interface - got id Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896323] hub 1-0:1.0: USB hub found Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896329] hub 1-0:1.0: 8 ports detected Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896331] hub 1-0:1.0: standalone hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896333] hub 1-0:1.0: no power switching (usb 1.0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896335] hub 1-0:1.0: individual port over-current protection Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896338] hub 1-0:1.0: power on to power good time: 20ms Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896343] hub 1-0:1.0: local power source is good Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896346] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.896387] drivers/usb/core/inode.c: creating file '001' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.908089] sdhci: Secure Digital Host Controller Interface driver Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.908092] sdhci: Copyright(c) Pierre Ossman Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.914842] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.914860] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.914872] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.914969] Registered led device: mmc0:: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.915058] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.915078] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.915092] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.915100] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.915168] Registered led device: mmc1:: Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.915224] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.923495] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.923510] ath5k 0000:05:00.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 4.923549] ath5k 0000:05:00.0: registered as 'phy0' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.239265] atkbd serio0: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0). Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.239269] atkbd serio0: Use 'setkeycodes e056 ' to make it known. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.239374] atkbd serio0: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0). Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.239377] atkbd serio0: Use 'setkeycodes e056 ' to make it known. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.390360] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.390366] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.443264] ath: EEPROM regdomain: 0x65 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.443267] ath: EEPROM indicates we should expect a direct regpair map Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.443272] ath: Country alpha2 being used: 00 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.443274] ath: Regpair used: 0x65 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.445818] phy0: Selected rate control algorithm 'minstrel' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.446226] Registered led device: ath5k-phy0::rx Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.446246] Registered led device: ath5k-phy0::tx Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.446250] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455489] uhci_hcd: USB Universal Host Controller Interface driver Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455565] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455577] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455581] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455591] drivers/usb/core/inode.c: creating file '002' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455597] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455607] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455613] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455615] uhci_hcd 0000:00:1d.0: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455633] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455641] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455689] usb usb2: default language 0x0409 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455697] usb usb2: udev 1, busnum 2, minor = 128 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455703] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455706] usb usb2: Product: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455709] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455711] usb usb2: SerialNumber: 0000:00:1d.0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455847] usb usb2: usb_probe_device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455851] usb usb2: configuration #1 chosen from 1 choice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455860] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455925] hub 2-0:1.0: usb_probe_interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455928] hub 2-0:1.0: usb_probe_interface - got id Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455931] hub 2-0:1.0: USB hub found Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455936] hub 2-0:1.0: 2 ports detected Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455938] hub 2-0:1.0: standalone hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455940] hub 2-0:1.0: no power switching (usb 1.0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455942] hub 2-0:1.0: individual port over-current protection Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455945] hub 2-0:1.0: power on to power good time: 2ms Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455950] hub 2-0:1.0: local power source is good Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455953] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.455971] drivers/usb/core/inode.c: creating file '001' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456037] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456058] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456066] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456070] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456075] drivers/usb/core/inode.c: creating file '003' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456080] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456088] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456094] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456096] uhci_hcd 0000:00:1d.1: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456113] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456120] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456154] usb usb3: default language 0x0409 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456161] usb usb3: udev 1, busnum 3, minor = 256 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456167] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456170] usb usb3: Product: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456173] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456175] usb usb3: SerialNumber: 0000:00:1d.1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456558] usb usb3: usb_probe_device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456562] usb usb3: configuration #1 chosen from 1 choice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456570] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456657] hub 3-0:1.0: usb_probe_interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456660] hub 3-0:1.0: usb_probe_interface - got id Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456662] hub 3-0:1.0: USB hub found Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456668] hub 3-0:1.0: 2 ports detected Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456670] hub 3-0:1.0: standalone hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456672] hub 3-0:1.0: no power switching (usb 1.0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456674] hub 3-0:1.0: individual port over-current protection Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456677] hub 3-0:1.0: power on to power good time: 2ms Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456681] hub 3-0:1.0: local power source is good Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456684] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456700] drivers/usb/core/inode.c: creating file '001' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456734] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456756] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456764] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456768] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456774] drivers/usb/core/inode.c: creating file '004' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456779] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456788] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456794] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456796] uhci_hcd 0000:00:1d.2: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456813] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456821] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456857] usb usb4: default language 0x0409 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456865] usb usb4: udev 1, busnum 4, minor = 384 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456870] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456873] usb usb4: Product: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456876] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.456879] usb usb4: SerialNumber: 0000:00:1d.2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457277] usb usb4: usb_probe_device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457282] usb usb4: configuration #1 chosen from 1 choice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457290] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457381] hub 4-0:1.0: usb_probe_interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457384] hub 4-0:1.0: usb_probe_interface - got id Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457387] hub 4-0:1.0: USB hub found Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457393] hub 4-0:1.0: 2 ports detected Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457395] hub 4-0:1.0: standalone hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457397] hub 4-0:1.0: no power switching (usb 1.0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457400] hub 4-0:1.0: individual port over-current protection Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457402] hub 4-0:1.0: power on to power good time: 2ms Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457406] hub 4-0:1.0: local power source is good Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457409] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457426] drivers/usb/core/inode.c: creating file '001' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457460] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457482] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457491] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457495] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457501] drivers/usb/core/inode.c: creating file '005' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457506] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457514] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457520] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457522] uhci_hcd 0000:00:1d.3: Performing full reset Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457540] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457547] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457585] usb usb5: default language 0x0409 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457592] usb usb5: udev 1, busnum 5, minor = 512 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457595] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457598] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457601] usb usb5: Product: UHCI Host Controller Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457604] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457607] usb usb5: SerialNumber: 0000:00:1d.3 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457962] usb usb5: usb_probe_device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457967] usb usb5: configuration #1 chosen from 1 choice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.457976] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459131] hub 5-0:1.0: usb_probe_interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459134] hub 5-0:1.0: usb_probe_interface - got id Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459137] hub 5-0:1.0: USB hub found Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459142] hub 5-0:1.0: 2 ports detected Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459144] hub 5-0:1.0: standalone hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459146] hub 5-0:1.0: no power switching (usb 1.0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459148] hub 5-0:1.0: individual port over-current protection Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459151] hub 5-0:1.0: power on to power good time: 2ms Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459155] hub 5-0:1.0: local power source is good Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459158] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459174] drivers/usb/core/inode.c: creating file '001' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.459207] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.492271] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.492285] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.492296] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.543046] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.543076] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.558320] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.558341] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.558345] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.559493] uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.559498] hub 5-0:1.0: port 1: status 0301 change 0003 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.659058] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.659073] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.673210] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.673216] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.673228] b44 0000:06:01.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.681635] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.681643] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.681651] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.711864] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.712214] b44: b44.c:v2.0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.720680] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.762061] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.906612] usb 5-1: skipped 1 descriptor after interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.911611] usb 5-1: default language 0x0409 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929603] usb 5-1: udev 2, busnum 5, minor = 513 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929606] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929609] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929613] usb 5-1: Product: Compact Optical Mouse 500 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929615] usb 5-1: Manufacturer: Microsoft Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929786] usb 5-1: usb_probe_device Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.929790] usb 5-1: configuration #1 chosen from 1 choice Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.942609] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.942658] usbhid 5-1:1.0: usb_probe_interface Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.942661] usbhid 5-1:1.0: usb_probe_interface - got id Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.956971] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.957235] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 5.957266] drivers/usb/core/inode.c: creating file '002' Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.083148] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.083154] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.083186] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.507160] blkid used greatest stack depth: 6360 bytes left Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.704049] usb usb2: suspend_rh (auto-stop) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.704079] usb usb3: suspend_rh (auto-stop) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 6.704104] usb usb4: suspend_rh (auto-stop) Jul 17 20:25:18 OnlyTux-Poland kernel: [ 7.220592] EXT3-fs (sda6): using internal journal Jul 17 20:25:18 OnlyTux-Poland kernel: [ 8.490854] kjournald starting. Commit interval 5 seconds Jul 17 20:25:18 OnlyTux-Poland kernel: [ 8.491125] EXT3-fs (sda7): using internal journal Jul 17 20:25:18 OnlyTux-Poland kernel: [ 8.491130] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 17 20:25:18 OnlyTux-Poland kernel: [ 8.510415] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 8.557153] NTFS volume version 3.1. Jul 17 20:25:18 OnlyTux-Poland kernel: [ 8.667471] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 17 20:25:18 OnlyTux-Poland kernel: [ 10.205437] find used greatest stack depth: 6268 bytes left Jul 17 20:25:19 OnlyTux-Poland acpid: starting up with proc fs Jul 17 20:25:19 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 17 20:25:19 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 17 20:25:19 OnlyTux-Poland acpid: 1 rule loaded Jul 17 20:25:19 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 17 20:25:20 OnlyTux-Poland acpid: client connected from 3125[0:0] Jul 17 20:25:20 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 20:25:20 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [daemon/startup.c(136)]: Jul 17 20:25:20 OnlyTux-Poland /usr/sbin/gpm[3186]: Started gpm successfully. Entered daemon mode. Jul 17 20:25:20 OnlyTux-Poland kernel: [ 19.213250] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 20:25:20 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [mice.c(1988)]: Jul 17 20:25:20 OnlyTux-Poland /usr/sbin/gpm[3186]: imps2: Auto-detected intellimouse PS/2 Jul 17 20:25:22 OnlyTux-Poland acpid: client connected from 3453[102:1002] Jul 17 20:25:22 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 20:25:24 OnlyTux-Poland dhcpcd[3973]: eth0: dhcpcd 4.0.15 starting Jul 17 20:25:24 OnlyTux-Poland dhcpcd[3973]: eth0: broadcasting for a lease Jul 17 20:25:27 OnlyTux-Poland kernel: [ 26.704227] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 17 20:25:27 OnlyTux-Poland kernel: [ 26.704231] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 17 20:25:27 OnlyTux-Poland dhcpcd[3973]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 17 20:25:27 OnlyTux-Poland dhcpcd[3973]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 17 20:25:27 OnlyTux-Poland dhcpcd[3973]: eth0: checking 192.168.1.4 is available on attached networks Jul 17 20:25:32 OnlyTux-Poland dhcpcd[3973]: eth0: leased 192.168.1.4 for 604800 seconds Jul 17 20:25:33 OnlyTux-Poland cron[4185]: (CRON) STARTUP (V5.0) Jul 17 20:25:41 OnlyTux-Poland login[4252]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 17 20:25:41 OnlyTux-Poland login[4259]: ROOT LOGIN on '/dev/tty1' Jul 17 20:25:46 OnlyTux-Poland sshd[4318]: Server listening on 0.0.0.0 port 22. Jul 17 20:26:39 OnlyTux-Poland sshd[4761]: Invalid user minicros from 192.168.1.7 Jul 17 20:26:39 OnlyTux-Poland sshd[4765]: pam_tally(sshd:auth): pam_get_uid; no such user Jul 17 20:26:46 OnlyTux-Poland login[4252]: pam_unix(login:session): session closed for user root Jul 17 20:26:54 OnlyTux-Poland login[4766]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 17 20:26:58 OnlyTux-Poland acpid: client connected from 4789[0:1000] Jul 17 20:26:58 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 20:27:14 OnlyTux-Poland kernel: [ 133.285745] exo-open used greatest stack depth: 6212 bytes left Jul 17 20:27:19 OnlyTux-Poland kernel: [ 138.626307] exo-helper-0.3 used greatest stack depth: 5828 bytes left Jul 17 20:27:23 OnlyTux-Poland kernel: [ 142.654942] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 17 20:27:25 OnlyTux-Poland kernel: [ 143.961885] skype used greatest stack depth: 5736 bytes left Jul 17 20:29:12 OnlyTux-Poland kernel: [ 251.552559] ssh used greatest stack depth: 5524 bytes left Jul 17 20:30:01 OnlyTux-Poland cron[4864]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 20:30:09 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000001 Jul 17 20:40:01 OnlyTux-Poland cron[4881]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 20:50:01 OnlyTux-Poland cron[4895]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 20:59:01 OnlyTux-Poland cron[4908]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 21:00:01 OnlyTux-Poland cron[4910]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 21:10:01 OnlyTux-Poland cron[4924]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 21:17:45 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000002 Jul 17 21:20:01 OnlyTux-Poland cron[4986]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 21:30:01 OnlyTux-Poland cron[5047]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 21:37:49 OnlyTux-Poland kernel: [ 4368.046258] firefox used greatest stack depth: 5420 bytes left Jul 17 21:40:01 OnlyTux-Poland cron[5083]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 21:47:43 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000003 Jul 17 21:50:01 OnlyTux-Poland cron[5103]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 21:59:01 OnlyTux-Poland cron[5117]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 22:00:01 OnlyTux-Poland cron[5119]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 22:10:01 OnlyTux-Poland cron[5133]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 22:18:40 OnlyTux-Poland logger: ACPI event unhandled: button/lid LID 00000080 00000004 Jul 17 22:20:01 OnlyTux-Poland cron[5174]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 22:30:01 OnlyTux-Poland cron[5266]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 22:40:01 OnlyTux-Poland cron[5286]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 22:41:09 OnlyTux-Poland kernel: [ 8167.978172] firefox used greatest stack depth: 5392 bytes left Jul 17 22:41:19 OnlyTux-Poland shutdown[5305]: shutting down for system halt Jul 17 22:41:19 OnlyTux-Poland init: Switching to runlevel: 0 Jul 17 22:41:19 OnlyTux-Poland kernel: [ 8178.772521] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 22:41:19 OnlyTux-Poland kernel: [ 8178.848227] X used greatest stack depth: 5336 bytes left Jul 17 22:41:21 OnlyTux-Poland kernel: [ 8180.466379] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 22:41:21 OnlyTux-Poland /usr/sbin/gpm[3186]: *** info [mice.c(1988)]: Jul 17 22:41:21 OnlyTux-Poland /usr/sbin/gpm[3186]: imps2: Auto-detected intellimouse PS/2 Jul 17 22:41:22 OnlyTux-Poland sshd[4318]: Received signal 15; terminating. Jul 17 22:41:24 OnlyTux-Poland dhcpcd[3980]: eth0: received SIGTERM, stopping Jul 17 22:41:24 OnlyTux-Poland kernel: [ 8183.703408] b44 ssb0:0: eth0: powering down PHY Jul 17 22:41:25 OnlyTux-Poland kernel: [ 8184.595405] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 17 22:41:27 OnlyTux-Poland acpid: exiting Jul 17 22:41:28 OnlyTux-Poland syslog-ng[2947]: Termination requested via signal, terminating; Jul 17 22:41:28 OnlyTux-Poland syslog-ng[2947]: syslog-ng shutting down; version='3.1.1' Jul 17 22:44:01 OnlyTux-Poland syslog-ng[2990]: syslog-ng starting up; version='3.1.1' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.32-gentoo-r7 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #8 Fri Jul 9 19:41:43 CEST 2010 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] KERNEL supported cpus: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Intel GenuineIntel Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] AMD AuthenticAMD Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] NSC Geode by NSC Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Cyrix CyrixInstead Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Centaur CentaurHauls Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Transmeta GenuineTMx86 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Transmeta TransmetaCPU Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] UMC UMC UMC UMC Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe3000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe3000 page 4k Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe3000 @ 10000-15000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe3000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe3000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] node 0 low ram: 00000000 - 37fe3000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] node 0 bootmap 00011000 - 00018000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037fe3000] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 000165a574] TEXT DATA BSS ==> [0001000000 - 000165a574] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] #3 [000165b000 - 00016610d5] BRK ==> [000165b000 - 00016610d5] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe3 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] early_node_map[3] active PFN ranges Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000000 -> 0x00000001 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe3 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229235 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1562f38, node_mem_map c1662000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223491 pages, LIFO batch:31 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227443 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Memory: 902312k/917388k available (3544k kernel code, 14520k reserved, 2019k data, 316k init, 0k highmem) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e3000 - 0xfffe3000 ( 120 MB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe3000 ( 895 MB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc156f000 - 0xc15be000 ( 316 kB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1376008 - 0xc156eff4 (2019 kB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1376008 (3544 kB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.000000] Detected 1729.081 MHz processor. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.16 BogoMIPS (lpj=1729081) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002190] Security Framework initialized Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002284] Mount-cache hash table entries: 512 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002459] Initializing cgroup subsys ns Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002548] Initializing cgroup subsys cpuacct Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002635] Initializing cgroup subsys freezer Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002723] Initializing cgroup subsys net_cls Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002825] CPU: L1 I cache: 32K, L1 D cache: 32K Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.002946] CPU: L2 cache: 1024K Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.003006] mce: CPU supports 6 MCE banks Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.003101] using mwait in idle threads. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.003192] Performance Events: no PMU driver, software events only. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.003315] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.003476] Checking 'hlt' instruction... OK. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.007577] ACPI: Core revision 20090903 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.018954] ACPI: setting ELCR to 0200 (from 0c60) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.020229] khelper used greatest stack depth: 7516 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.020367] khelper used greatest stack depth: 7384 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.021261] Time: 22:43:43 Date: 07/17/10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.021390] NET: Registered protocol family 16 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.021853] ACPI: bus type pci registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.022075] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.022169] PCI: MCFG area at e0000000 reserved in E820 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.022258] PCI: Using MMCONFIG for extended config space Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.022347] PCI: Using configuration type 1 for base access Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.022728] khelper used greatest stack depth: 7216 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.028862] bio: create slab at 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.029752] ACPI: EC: Look up EC in DSDT Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.033305] ACPI: BIOS _OSI(Linux) query ignored Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.034286] ACPI: Interpreter enabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.034380] ACPI: (supports S0 S3 S4 S5) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.034613] ACPI: Using PIC for interrupt routing Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.086415] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.087074] ACPI: No dock devices found. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.087736] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.087947] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.087953] pci 0000:00:02.0: reg 14 io port: [0x5088-0x508f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.087959] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.087965] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088037] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088154] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088216] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088311] pci 0000:00:1b.0: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088488] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088582] pci 0000:00:1c.0: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088760] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.088854] pci 0000:00:1c.1: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089043] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089137] pci 0000:00:1c.2: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089318] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089411] pci 0000:00:1c.3: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089561] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089626] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089692] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089757] pci 0000:00:1d.3: reg 20 io port: [0x5400-0x541f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089826] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089890] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.089994] pci 0000:00:1d.7: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.090255] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.090396] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.090492] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.090631] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.091064] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.091073] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.091082] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.091090] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.091099] pci 0000:00:1f.2: reg 20 io port: [0x5440-0x544f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.091135] pci 0000:00:1f.2: PME# supported from D3hot Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092001] pci 0000:00:1f.2: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092150] pci 0000:00:1f.3: reg 20 io port: [0x5420-0x543f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092245] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092250] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092460] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0000000-0xd000ffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092553] pci 0000:05:00.0: PME# supported from D3hot Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092646] pci 0000:05:00.0: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092809] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd00fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092859] pci 0000:06:01.0: reg 10 32bit mmio: [0xd0100000-0xd0101fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092916] pci 0000:06:01.0: supports D1 D2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092919] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.092998] pci 0000:06:01.0: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093135] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093163] pci 0000:06:04.0: supports D1 D2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093166] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093262] pci 0000:06:04.0: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093397] pci 0000:06:04.1: reg 10 32bit mmio: [0xd0103000-0xd010307f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093468] pci 0000:06:04.1: supports D1 D2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093471] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093565] pci 0000:06:04.1: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093698] pci 0000:06:04.2: reg 10 32bit mmio: [0xd0103400-0xd01034ff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093769] pci 0000:06:04.2: supports D1 D2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093772] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.093867] pci 0000:06:04.2: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094037] pci 0000:06:04.3: reg 10 32bit mmio: [0xd0103800-0xd010387f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094108] pci 0000:06:04.3: supports D1 D2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094111] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094204] pci 0000:06:04.3: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094339] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094410] pci 0000:06:04.4: supports D1 D2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094413] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094508] pci 0000:06:04.4: PME# disabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094656] pci 0000:00:1e.0: transparent bridge Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094750] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094811] pci_bus 0000:00: on NUMA node 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.094817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.095165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.095276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.095385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.095499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.095632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.100776] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.101288] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.101779] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.102304] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.102828] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.103447] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.104001] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.104494] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.105079] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.105228] vgaarb: loaded Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.105498] SCSI subsystem initialized Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.105614] libata version 3.00 loaded. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.105807] usbcore: registered new interface driver usbfs Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.105939] usbcore: registered new interface driver hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.106040] usbcore: registered new device driver usb Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.106382] PCI: Using ACPI for IRQ routing Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.106473] pci 0000:00:1c.0: BAR 7: can't allocate resource Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.106562] pci 0000:00:1c.0: BAR 8: can't allocate resource Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.107571] cfg80211: Using static regulatory domain info Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.107662] cfg80211: Regulatory domain: US Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.107749] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.107887] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108007] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108100] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108194] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108288] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108380] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108477] cfg80211: Calling CRDA for country: US Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108597] NetLabel: Initializing Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108683] NetLabel: domain hash size = 128 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108770] NetLabel: protocols = UNLABELED CIPSOv4 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.108870] NetLabel: unlabeled traffic allowed by default Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.109061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.109281] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.110988] Switching to clocksource tsc Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.112918] pnp: PnP ACPI init Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.113014] ACPI: bus type pnp registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.136530] pnp: PnP ACPI: found 10 devices Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.136620] ACPI: ACPI bus type pnp unregistered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.136718] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.136812] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.136907] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137002] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137096] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137190] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137288] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137386] system 00:06: ioport range 0x800-0x80f has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137490] system 00:06: ioport range 0x1000-0x107f has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137583] system 00:06: ioport range 0x1180-0x11bf has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137675] system 00:06: ioport range 0x1640-0x164f has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137768] system 00:06: ioport range 0xfe00-0xfefe has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.137862] system 00:06: ioport range 0xff2c-0xff2f has been reserved Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.172661] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.172754] pci 0000:00:1c.0: IO window: 0x2000-0x2fff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.172849] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.172943] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173087] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173180] pci 0000:00:1c.1: IO window: 0x3000-0x3fff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173274] pci 0000:00:1c.1: MEM window: 0x44400000-0x445fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173369] pci 0000:00:1c.1: PREFETCH window: 0x00000044600000-0x000000447fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173529] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173622] pci 0000:00:1c.2: IO window: 0x4000-0x4fff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173716] pci 0000:00:1c.2: MEM window: 0x44800000-0x449fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173810] pci 0000:00:1c.2: PREFETCH window: 0x00000044a00000-0x00000044bfffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.173955] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174046] pci 0000:00:1c.3: IO window: 0x6000-0x6fff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174140] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd00fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174235] pci 0000:00:1c.3: PREFETCH window: 0x00000044c00000-0x00000044dfffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174390] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174496] pci 0000:06:04.0: IO window: 0x007000-0x0070ff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174590] pci 0000:06:04.0: IO window: 0x007400-0x0074ff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174684] pci 0000:06:04.0: PREFETCH window: 0x40000000-0x43ffffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174780] pci 0000:06:04.0: MEM window: 0x48000000-0x4bffffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174875] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.174967] pci 0000:00:1e.0: IO window: 0x7000-0x7fff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175062] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175156] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175262] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175542] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175632] PCI: setting IRQ 11 as level-triggered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175640] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175785] pci 0000:00:1c.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.175956] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176046] PCI: setting IRQ 6 as level-triggered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176053] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176195] pci 0000:00:1c.1: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176363] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176452] PCI: setting IRQ 10 as level-triggered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176459] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176613] pci 0000:00:1c.2: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176781] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.176874] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177016] pci 0000:00:1c.3: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177023] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177117] pci 0000:00:1e.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177131] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177275] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177278] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177282] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177285] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177289] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177292] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177295] pci_bus 0000:03: resource 1 mem: [0x44400000-0x445fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177299] pci_bus 0000:03: resource 2 pref mem [0x44600000-0x447fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177302] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177305] pci_bus 0000:04: resource 1 mem: [0x44800000-0x449fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177308] pci_bus 0000:04: resource 2 pref mem [0x44a00000-0x44bfffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177312] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177315] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd00fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177318] pci_bus 0000:05: resource 2 pref mem [0x44c00000-0x44dfffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177322] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177325] pci_bus 0000:06: resource 1 mem: [0xd0100000-0xd01fffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177328] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177331] pci_bus 0000:06: resource 3 io: [0x00-0xffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177334] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177338] pci_bus 0000:07: resource 0 io: [0x7000-0x70ff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177341] pci_bus 0000:07: resource 1 io: [0x7400-0x74ff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177344] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177348] pci_bus 0000:07: resource 3 mem: [0x48000000-0x4bffffff] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177381] NET: Registered protocol family 2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177568] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.177969] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.178881] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179182] TCP: Hash tables configured (established 131072 bind 65536) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179275] TCP reno registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179461] NET: Registered protocol family 1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179686] RPC: Registered udp transport module. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179775] RPC: Registered tcp transport module. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179863] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179966] pci 0000:00:02.0: Boot video device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179980] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.179983] pci 0000:00:1d.0: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180002] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180004] pci 0000:00:1d.1: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180023] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180025] pci 0000:00:1d.2: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180043] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180046] pci 0000:00:1d.3: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180237] Simple Boot Flag at 0x36 set to 0x1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.180967] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.181102] Microcode Update Driver: v2.00 , Peter Oruba Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.181242] Scanning for low memory corruption every 60 seconds Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.181711] audit: initializing netlink socket (disabled) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.181812] type=2000 audit(1279406623.181:1): initialized Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.194100] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.197317] VFS: Disk quotas dquot_6.5.2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.197511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.198383] NTFS driver 2.1.29 [Flags: R/O]. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.198756] msgmni has been set to 1762 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.199040] cryptomgr_test used greatest stack depth: 6980 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.199752] alg: No test for stdrng (krng) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.199984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.200125] io scheduler noop registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.200211] io scheduler anticipatory registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.200300] io scheduler deadline registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.200459] io scheduler cfq registered (default) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.200727] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.200928] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.201119] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.201319] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.201560] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.205321] Non-volatile memory driver v1.3 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.205441] intel_rng: FWH not detected Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.205553] Linux agpgart interface v0.103 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.205654] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.206015] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.208836] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.213436] ACPI: AC Adapter [ACAD] (on-line) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.213705] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.213890] ACPI: Lid Switch [LID] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.214055] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.214199] ACPI: Sleep Button [SLPB] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.214361] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.214518] ACPI: Power Button [PWRB] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.214701] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.214840] ACPI: Power Button [PWRF] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.215320] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.215488] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.216377] Marking TSC unstable due to TSC halts in idle Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.216582] Switching to clocksource hpet Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.216693] processor LNXCPU:00: registered as cooling_device0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.245625] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.245768] thermal LNXTHERM:01: registered as thermal_zone0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.245862] ACPI: Thermal Zone [TZ00] (52 C) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.254075] thermal LNXTHERM:02: registered as thermal_zone1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.254174] ACPI: Thermal Zone [TZ01] (52 C) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.254361] [drm] Initialized drm 1.1.0 20060810 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.254470] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.255594] i915 0000:00:02.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.258307] [drm] set up 7M of stolen space Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.692465] ACPI: Battery Slot [BAT1] (battery absent) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 0.853618] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.081591] [drm] LVDS-8: set mode 1280x800 1d Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.128078] Console: switching to colour frame buffer device 160x50 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.133519] fb0: inteldrmfb frame buffer device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.133562] registered panic notifier Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.133604] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.133728] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.136284] brd: module loaded Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.137223] loop: module loaded Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.137337] input: Macintosh mouse button emulation as /devices/virtual/input/input5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.137756] ata_piix 0000:00:1f.2: version 2.13 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.137778] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.137861] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.288041] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.288107] scsi0 : ata_piix Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.288277] scsi1 : ata_piix Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.289510] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.289577] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290175] console [netcon0] enabled Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290212] netconsole: network logging started Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290447] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290652] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290707] PCI: setting IRQ 5 as level-triggered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290715] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290807] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290811] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290874] drivers/usb/core/inode.c: creating file 'devices' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290879] drivers/usb/core/inode.c: creating file '001' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.290950] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.291055] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.291061] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.291079] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.291148] ehci_hcd 0000:00:1d.7: debug port 1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.291196] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.295084] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.295087] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.295100] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.295156] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.299049] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.305026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.306280] usb usb1: default language 0x0409 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.306288] usb usb1: udev 1, busnum 1, minor = 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.306291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.307571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.308907] usb usb1: Product: EHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.310249] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.311643] usb usb1: SerialNumber: 0000:00:1d.7 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.313096] usb usb1: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.313136] usb usb1: usb_probe_device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.313140] usb usb1: configuration #1 chosen from 1 choice Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.314604] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.314620] usb 1-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.314662] hub 1-0:1.0: usb_probe_interface Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.314665] hub 1-0:1.0: usb_probe_interface - got id Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.314668] hub 1-0:1.0: USB hub found Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.316158] hub 1-0:1.0: 8 ports detected Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317663] hub 1-0:1.0: standalone hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317665] hub 1-0:1.0: no power switching (usb 1.0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317668] hub 1-0:1.0: individual port over-current protection Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317671] hub 1-0:1.0: power on to power good time: 20ms Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317676] hub 1-0:1.0: local power source is good Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317679] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317719] drivers/usb/core/inode.c: creating file '001' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.317777] uhci_hcd: USB Universal Host Controller Interface driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.319404] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.321051] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.321055] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.322713] drivers/usb/core/inode.c: creating file '002' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.322769] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.324486] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.326212] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.326215] uhci_hcd 0000:00:1d.0: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.326231] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.326242] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.328053] usb usb2: default language 0x0409 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.328061] usb usb2: udev 1, busnum 2, minor = 128 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.328063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.329879] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.331748] usb usb2: Product: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.333644] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.335569] usb usb2: SerialNumber: 0000:00:1d.0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.337514] usb usb2: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.337553] usb usb2: usb_probe_device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.337556] usb usb2: configuration #1 chosen from 1 choice Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.339472] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.339489] usb 2-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.339524] hub 2-0:1.0: usb_probe_interface Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.339527] hub 2-0:1.0: usb_probe_interface - got id Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.339530] hub 2-0:1.0: USB hub found Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.341433] hub 2-0:1.0: 2 ports detected Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343320] hub 2-0:1.0: standalone hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343322] hub 2-0:1.0: no power switching (usb 1.0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343324] hub 2-0:1.0: individual port over-current protection Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343327] hub 2-0:1.0: power on to power good time: 2ms Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343331] hub 2-0:1.0: local power source is good Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343334] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343352] drivers/usb/core/inode.c: creating file '001' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.343387] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.345328] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.345332] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.347235] drivers/usb/core/inode.c: creating file '003' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.347293] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.349212] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.351122] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.351125] uhci_hcd 0000:00:1d.1: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.351141] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.351153] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.353075] usb usb3: default language 0x0409 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.353082] usb usb3: udev 1, busnum 3, minor = 256 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.353085] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.354968] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.356858] usb usb3: Product: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.358710] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.360612] usb usb3: SerialNumber: 0000:00:1d.1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.362524] usb usb3: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.362562] usb usb3: usb_probe_device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.362565] usb usb3: configuration #1 chosen from 1 choice Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.364467] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.364483] usb 3-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.364519] hub 3-0:1.0: usb_probe_interface Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.364521] hub 3-0:1.0: usb_probe_interface - got id Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.364524] hub 3-0:1.0: USB hub found Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.366406] hub 3-0:1.0: 2 ports detected Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368270] hub 3-0:1.0: standalone hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368273] hub 3-0:1.0: no power switching (usb 1.0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368275] hub 3-0:1.0: individual port over-current protection Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368278] hub 3-0:1.0: power on to power good time: 2ms Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368282] hub 3-0:1.0: local power source is good Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368285] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368303] drivers/usb/core/inode.c: creating file '001' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.368337] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.370258] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.370262] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.372153] drivers/usb/core/inode.c: creating file '004' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.372210] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.374104] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.375960] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.375963] uhci_hcd 0000:00:1d.2: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.375979] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.375991] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.377875] usb usb4: default language 0x0409 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.377882] usb usb4: udev 1, busnum 4, minor = 384 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.377885] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.379760] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.381661] usb usb4: Product: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.383566] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.385479] usb usb4: SerialNumber: 0000:00:1d.2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.387401] usb usb4: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.387440] usb usb4: usb_probe_device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.387443] usb usb4: configuration #1 chosen from 1 choice Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.389346] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.389364] usb 4-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.389401] hub 4-0:1.0: usb_probe_interface Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.389404] hub 4-0:1.0: usb_probe_interface - got id Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.389407] hub 4-0:1.0: USB hub found Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.391295] hub 4-0:1.0: 2 ports detected Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393155] hub 4-0:1.0: standalone hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393158] hub 4-0:1.0: no power switching (usb 1.0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393160] hub 4-0:1.0: individual port over-current protection Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393163] hub 4-0:1.0: power on to power good time: 2ms Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393167] hub 4-0:1.0: local power source is good Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393170] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393185] drivers/usb/core/inode.c: creating file '001' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.393219] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.395142] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.395146] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.397052] drivers/usb/core/inode.c: creating file '005' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.397110] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.399047] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.400967] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.400969] uhci_hcd 0000:00:1d.3: Performing full reset Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.400986] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.400993] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.402946] usb usb5: default language 0x0409 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.402953] usb usb5: udev 1, busnum 5, minor = 512 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.402956] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.404864] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.406784] usb usb5: Product: UHCI Host Controller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.408672] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.410574] usb usb5: SerialNumber: 0000:00:1d.3 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.412509] usb usb5: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.412548] usb usb5: usb_probe_device Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.412551] usb usb5: configuration #1 chosen from 1 choice Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.414451] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.414470] usb 5-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.414507] hub 5-0:1.0: usb_probe_interface Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.414510] hub 5-0:1.0: usb_probe_interface - got id Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.414512] hub 5-0:1.0: USB hub found Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.416405] hub 5-0:1.0: 2 ports detected Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418290] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418298] hub 5-0:1.0: standalone hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418301] hub 5-0:1.0: no power switching (usb 1.0) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418303] hub 5-0:1.0: individual port over-current protection Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418306] hub 5-0:1.0: power on to power good time: 2ms Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418310] hub 5-0:1.0: local power source is good Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418312] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418329] drivers/usb/core/inode.c: creating file '001' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.418399] Initializing USB Mass Storage driver... Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.420331] usbcore: registered new interface driver usb-storage Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.422230] USB Mass Storage support registered. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.424172] usbcore: registered new interface driver libusual Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.426180] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.430470] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.432468] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.434387] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.436358] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.438275] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.440529] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.442561] mice: PS/2 mouse device common for all mice Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.444761] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.445033] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.446873] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.449434] rtc_cmos 00:07: RTC can wake from S4 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.451396] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.453688] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.455666] ata1.00: configured for UDMA/100 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.457649] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.459673] i2c /dev entries driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.461717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.464135] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.466250] sd 0:0:0:0: [sda] Write Protect is off Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.468234] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.468666] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.470781] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.470990] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.473264] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.475547] sda: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.475836] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.480268] cpuidle: using governor ladder Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.482624] cpuidle: using governor menu Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.485857] usbcore: registered new interface driver hiddev Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.488087] usbcore: registered new interface driver usbhid Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.490094] usbhid: v2.6:USB HID core driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.492181] GACT probability on Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.494192] Mirror/redirect action on Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.496190] sda1 sda2 sda3 sda4 < Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.496400] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.498617] netem: version 1.2 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.500543] u32 classifier Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.502468] Performance counters on Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.504361] input device check on Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.506237] Actions configured Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.508095] Netfilter messages via NETLINK v0.30. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.510298] ata2.00: configured for UDMA/33 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.512282] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.514567] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.516596] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.518548] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.520632] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.520889] ctnetlink v0.93: registering with nfnetlink. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.522936] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.524960] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.526948] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.528949] sda5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.529338] xt_time: kernel timezone is -0000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.533771] IPv4 over IPv4 tunneling driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.535922] sda6 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.536441] GRE over IPv4 tunneling driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.541363] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.543618] ClusterIP Version 0.8 loaded successfully Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.545797] arp_tables: (C) 2002 David S. Miller Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.548061] TCP bic registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.550074] TCP cubic registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.552066] TCP westwood registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.553988] TCP highspeed registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.555865] TCP hybla registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.557727] TCP htcp registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.559539] TCP vegas registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.561286] TCP veno registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.563014] TCP scalable registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.564736] TCP lp registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.566422] TCP yeah registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.568064] TCP illinois registered Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.569638] Initializing XFRM netlink socket Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.571223] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.572798] Uniform CD-ROM driver Revision: 3.20 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.574410] sda7 > Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.576410] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.576590] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.578582] sd 0:0:0:0: [sda] Attached SCSI disk Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.580222] NET: Registered protocol family 17 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.581958] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.583808] PM: Resume from disk failed. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.583824] registered taskstats version 1 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.585992] Magic number: 2:303:755 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 1.587735] pci 0000:06:04.2: hash matches Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.104009] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.136291] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.170953] kjournald starting. Commit interval 5 seconds Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.172795] EXT3-fs: mounted filesystem with writeback data mode. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.174629] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.176492] Freeing unused kernel memory: 316k freed Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.178510] Write protecting the kernel text: 3548k Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.180357] Write protecting the kernel read-only data: 1700k Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.454049] usb usb2: suspend_rh (auto-stop) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.454077] usb usb3: suspend_rh (auto-stop) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.454102] usb usb4: suspend_rh (auto-stop) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.454127] usb usb5: suspend_rh (auto-stop) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.475040] async/0 used greatest stack depth: 6660 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 2.578052] async/1 used greatest stack depth: 6600 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.504586] stty used greatest stack depth: 6436 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704038] hub 1-0:1.0: hub_suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704048] usb usb1: bus auto-suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704051] ehci_hcd 0000:00:1d.7: suspend root hub Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704083] hub 2-0:1.0: hub_suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704086] usb usb2: bus auto-suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704089] usb usb2: suspend_rh Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704108] hub 3-0:1.0: hub_suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704111] usb usb3: bus auto-suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704113] usb usb3: suspend_rh Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704130] hub 4-0:1.0: hub_suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704134] usb usb4: bus auto-suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704136] usb usb4: suspend_rh Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704153] hub 5-0:1.0: hub_suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704156] usb usb5: bus auto-suspend Jul 17 22:44:01 OnlyTux-Poland kernel: [ 3.704158] usb usb5: suspend_rh Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.814704] udevd used greatest stack depth: 6304 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.819108] udev: starting version 149 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.837330] usb usb2: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.837636] usb 2-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.838062] usb usb3: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.838198] usb 3-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.838592] usb usb4: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.838726] usb 4-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.852254] usb usb5: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.852331] usb 5-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.852543] usb usb1: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 4.852620] usb 1-0:1.0: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.023777] usb usb2: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.024508] usb usb3: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.025376] usb usb4: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.026215] usb usb1: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.027049] usb usb5: uevent Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.033366] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.033381] ath5k 0000:05:00.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.033657] ath5k 0000:05:00.0: registered as 'phy0' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.533597] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.533605] ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI region SMBI [0x5420-0x542f] Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.533608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.621764] ath: EEPROM regdomain: 0x65 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.621767] ath: EEPROM indicates we should expect a direct regpair map Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.621771] ath: Country alpha2 being used: 00 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.621773] ath: Regpair used: 0x65 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.624092] phy0: Selected rate control algorithm 'minstrel' Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.624540] Registered led device: ath5k-phy0::rx Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.624556] Registered led device: ath5k-phy0::tx Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.624560] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.677977] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.677983] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.677996] b44 0000:06:01.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.715203] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.715403] b44.c:v2.0 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.723595] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.791691] sdhci: Secure Digital Host Controller Interface driver Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.791695] sdhci: Copyright(c) Pierre Ossman Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.792625] cdrom_id used greatest stack depth: 6276 bytes left Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826734] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826752] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826764] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826861] Registered led device: mmc0:: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826921] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826941] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826955] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.826963] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.827162] Registered led device: mmc1:: Jul 17 22:44:01 OnlyTux-Poland kernel: [ 5.827299] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 17 22:44:01 OnlyTux-Poland kernel: [ 6.372485] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 6.372491] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 6.372524] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 17 22:44:01 OnlyTux-Poland kernel: [ 7.360978] EXT3 FS on sda6, internal journal Jul 17 22:44:01 OnlyTux-Poland kernel: [ 8.576854] kjournald starting. Commit interval 5 seconds Jul 17 22:44:01 OnlyTux-Poland kernel: [ 8.577089] EXT3 FS on sda7, internal journal Jul 17 22:44:01 OnlyTux-Poland kernel: [ 8.577094] EXT3-fs: mounted filesystem with writeback data mode. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 8.632064] NTFS volume version 3.1. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 8.753537] Adding 795176k swap on /dev/sda5. Priority:-1 extents:1 across:795176k Jul 17 22:44:01 OnlyTux-Poland kernel: [ 11.410641] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0). Jul 17 22:44:01 OnlyTux-Poland kernel: [ 11.410645] atkbd.c: Use 'setkeycodes e056 ' to make it known. Jul 17 22:44:01 OnlyTux-Poland kernel: [ 11.410779] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0). Jul 17 22:44:01 OnlyTux-Poland kernel: [ 11.410782] atkbd.c: Use 'setkeycodes e056 ' to make it known. Jul 17 22:44:02 OnlyTux-Poland acpid: starting up with proc fs Jul 17 22:44:02 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 17 22:44:02 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 17 22:44:02 OnlyTux-Poland acpid: 1 rule loaded Jul 17 22:44:02 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 17 22:44:02 OnlyTux-Poland acpid: client connected from 3168[0:0] Jul 17 22:44:02 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 22:44:03 OnlyTux-Poland /usr/sbin/gpm[3229]: *** info [daemon/startup.c(136)]: Jul 17 22:44:03 OnlyTux-Poland /usr/sbin/gpm[3229]: Started gpm successfully. Entered daemon mode. Jul 17 22:44:03 OnlyTux-Poland /usr/sbin/gpm[3229]: *** info [mice.c(1988)]: Jul 17 22:44:03 OnlyTux-Poland /usr/sbin/gpm[3229]: imps2: Auto-detected intellimouse PS/2 Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.698204] usb usb2: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.698350] usb 2-0:1.0: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.698578] usb usb3: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.698713] usb 3-0:1.0: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.698932] usb usb4: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.699529] usb 4-0:1.0: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.699764] usb usb5: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.699901] usb 5-0:1.0: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.700356] usb usb1: uevent Jul 17 22:44:05 OnlyTux-Poland kernel: [ 21.700492] usb 1-0:1.0: uevent Jul 17 22:44:05 OnlyTux-Poland acpid: client connected from 3496[102:1002] Jul 17 22:44:05 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 22:44:07 OnlyTux-Poland dhcpcd[4016]: eth0: dhcpcd 4.0.15 starting Jul 17 22:44:07 OnlyTux-Poland dhcpcd[4016]: eth0: broadcasting for a lease Jul 17 22:44:37 OnlyTux-Poland dhcpcd[4016]: eth0: timed out Jul 17 22:44:37 OnlyTux-Poland dhcpcd[4016]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.lease' Jul 17 22:44:37 OnlyTux-Poland dhcpcd[4016]: eth0: probing for an IPV4LL address Jul 17 22:44:37 OnlyTux-Poland dhcpcd[4016]: eth0: checking 169.254.160.172 is available on attached networks Jul 17 22:44:42 OnlyTux-Poland dhcpcd[4016]: eth0: using IPv4LL address 169.254.160.172 Jul 17 22:44:43 OnlyTux-Poland kernel: [ 59.582083] dhcpcd used greatest stack depth: 6256 bytes left Jul 17 22:44:43 OnlyTux-Poland cron[4227]: (CRON) STARTUP (V5.0) Jul 17 22:44:55 OnlyTux-Poland login[4294]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 17 22:44:55 OnlyTux-Poland login[4300]: ROOT LOGIN on '/dev/tty1' Jul 17 22:45:50 OnlyTux-Poland dhcpcd[4022]: eth0: broadcasting for a lease Jul 17 22:45:59 OnlyTux-Poland login[4294]: pam_unix(login:session): session closed for user root Jul 17 22:46:07 OnlyTux-Poland login[4311]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 17 22:46:15 OnlyTux-Poland acpid: client connected from 4334[0:1000] Jul 17 22:46:15 OnlyTux-Poland acpid: 1 client rule loaded Jul 17 22:46:15 OnlyTux-Poland kernel: [ 152.171780] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:15 OnlyTux-Poland kernel: [ 152.313129] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:16 OnlyTux-Poland kernel: [ 152.590896] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:16 OnlyTux-Poland kernel: [ 152.732187] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:19 OnlyTux-Poland kernel: [ 155.769298] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:19 OnlyTux-Poland kernel: [ 155.910750] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:19 OnlyTux-Poland kernel: [ 156.189341] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:46:19 OnlyTux-Poland kernel: [ 156.331028] [drm] TV-14: set mode NTSC 480i 0 Jul 17 22:47:34 OnlyTux-Poland kernel: [ 231.489261] skype used greatest stack depth: 6252 bytes left Jul 17 22:47:39 OnlyTux-Poland kernel: [ 236.086491] blkid used greatest stack depth: 6164 bytes left Jul 17 22:47:41 OnlyTux-Poland kernel: [ 238.241314] ISO 9660 Extensions: Microsoft Joliet Level 3 Jul 17 22:47:41 OnlyTux-Poland kernel: [ 238.243724] ISO 9660 Extensions: RRIP_1991A Jul 17 22:50:01 OnlyTux-Poland cron[4437]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 22:59:01 OnlyTux-Poland cron[4486]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 17 23:00:01 OnlyTux-Poland cron[4492]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 23:10:01 OnlyTux-Poland cron[4547]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 23:20:01 OnlyTux-Poland cron[4600]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 23:29:30 OnlyTux-Poland kernel: [ 2746.830931] gmplayer used greatest stack depth: 5940 bytes left Jul 17 23:30:01 OnlyTux-Poland cron[4659]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 23:40:01 OnlyTux-Poland cron[4713]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 23:50:01 OnlyTux-Poland cron[4767]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 17 23:59:01 OnlyTux-Poland cron[4817]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 19 01:50:23 OnlyTux-Poland syslog-ng[2946]: syslog-ng starting up; version='3.1.1' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Linux version 2.6.34-gentoo-r1 (root@OnlyTux-Poland) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Tue Jul 13 17:24:38 CEST 2010 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] DMI present. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] MTRR default type: uncachable Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 00000-9FFFF write-back Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] A0000-BFFFF uncachable Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] C0000-CFFFF write-protect Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] D0000-DFFFF uncachable Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] E0000-FFFFF write-protect Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] MTRR variable ranges enabled: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 3 disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 4 disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 5 disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 6 disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 7 disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] PAT not supported by CPU. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Warning only 895MB will be used. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Use a HIGHMEM enabled kernel. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Scanning 1 areas for low memory corruption Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified physical RAM map: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fe2000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 0000400000 - 0037c00000 page 2M Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 0037c00000 - 0037fe2000 page 4k Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] kernel direct mapping tables up to 37fe2000 @ 14000-19000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: FACS 3f68efc0 00040 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 895MB LOWMEM available. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] mapped low ram: 0 - 37fe2000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] low ram: 0 - 37fe2000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Zone PFN ranges: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Normal 0x00001000 -> 0x00037fe2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Movable zone start PFN for each node Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] early_node_map[2] active PFN ranges Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] 0: 0x00000100 -> 0x00037fe2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] On node 0 totalpages: 229233 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1558ac4, node_mem_map c165b300 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 32 pages used for memmap Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 0 pages reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 1760 pages used for memmap Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Normal zone: 223490 pages, LIFO batch:31 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227441 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Kernel command line: root=/dev/sda6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Initializing CPU#0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Subtract (32 early reservations) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #1 [0001000000 - 00016545f4] TEXT DATA BSS Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #3 [0001655000 - 000165b0d5] BRK Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #6 [000165b100 - 0001d5b100] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #7 [0001654600 - 0001654604] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #8 [0001654680 - 0001654700] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #9 [0001654700 - 0001654754] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #10 [0001d5b100 - 0001d5d100] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #11 [0001654780 - 00016547a5] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #12 [0001654800 - 0001654988] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #13 [0001654a00 - 0001654a40] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #14 [0001654a80 - 0001654ac0] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #15 [0001654b00 - 0001654b40] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #16 [0001654b80 - 0001654bc0] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #17 [0001654c00 - 0001654c40] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #18 [0001654c80 - 0001654cc0] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #19 [0001654d00 - 0001654d40] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #20 [0001654d80 - 0001654dc0] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #21 [0001654e00 - 0001654e40] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #22 [0001654e80 - 0001654ec0] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #23 [0001654f00 - 0001654f40] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #24 [0001654f80 - 0001654fc0] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #25 [0001d5d100 - 0001d5d140] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #26 [0001d5d180 - 0001d5d190] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #27 [0001d5d200 - 0001d5d20f] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #28 [0001d5d280 - 0001d5d28f] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #29 [0001d5d300 - 0001d61300] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #30 [0001d61300 - 0001de1300] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] #31 [0001de1300 - 0001e21300] BOOTMEM Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Memory: 902440k/917384k available (3495k kernel code, 14492k reserved, 2027k data, 328k init, 0k highmem) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] virtual kernel memory layout: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] vmalloc : 0xf87e2000 - 0xfffe2000 ( 120 MB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7fe2000 ( 895 MB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] .init : 0xc1565000 - 0xc15b7000 ( 328 kB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] .data : 0xc1369da0 - 0xc1564ba4 (2027 kB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369da0 (3495 kB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Hierarchical RCU implementation. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] NR_IRQS:16 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Console: colour VGA+ 80x25 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] console [tty0] enabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] hpet clockevent registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Fast TSC calibration using PIT Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.000000] Detected 1729.064 MHz processor. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.12 BogoMIPS (lpj=1729064) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.001293] Security Framework initialized Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.001433] SELinux: Initializing. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.001572] SELinux: Starting in permissive mode Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.001578] Mount-cache hash table entries: 512 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.002105] Initializing cgroup subsys ns Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.002243] Initializing cgroup subsys cpuacct Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.002380] Initializing cgroup subsys freezer Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.002517] Initializing cgroup subsys net_cls Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.002675] mce: CPU supports 6 MCE banks Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.002817] using mwait in idle threads. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003009] Performance Events: Core events, core PMU driver. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003214] ... version: 1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003350] ... bit width: 40 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003483] ... generic registers: 2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003619] ... value mask: 000000ffffffffff Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003756] ... max period: 000000007fffffff Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.003894] ... fixed-purpose events: 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.004003] ... event mask: 0000000000000003 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.004141] CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.004347] Checking 'hlt' instruction... OK. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.008599] ACPI: Core revision 20100121 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.020904] ACPI: setting ELCR to 0200 (from 0c60) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.022348] khelper used greatest stack depth: 7296 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.022732] Time: 1:50:01 Date: 07/19/10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.023038] NET: Registered protocol family 16 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.023555] ACPI: bus type pci registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.023810] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.024014] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.024154] PCI: Using MMCONFIG for extended config space Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.024291] PCI: Using configuration type 1 for base access Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.024717] khelper used greatest stack depth: 7260 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.030459] bio: create slab at 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.031844] ACPI: EC: Look up EC in DSDT Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.035608] ACPI: BIOS _OSI(Linux) query ignored Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.036685] ACPI: Interpreter enabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.036832] ACPI: (supports S0 S3 S4 S5) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.037006] ACPI: Using PIC for interrupt routing Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.088575] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.089306] ACPI: No dock devices found. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.090006] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.090850] ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092343] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092346] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092350] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092354] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092357] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092361] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092364] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092430] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092436] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092442] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092447] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092485] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092592] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092654] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092660] pci 0000:00:1b.0: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092756] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092762] pci 0000:00:1c.0: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092861] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092866] pci 0000:00:1c.1: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092965] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.092970] pci 0000:00:1c.2: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093082] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093088] pci 0000:00:1c.3: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093151] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093214] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093278] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093341] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093401] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093465] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093471] pci 0000:00:1d.7: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093634] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.093873] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094545] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094554] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094562] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094571] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094579] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094616] pci 0000:00:1f.2: PME# supported from D3hot Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094621] pci 0000:00:1f.2: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094682] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094776] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094917] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094923] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.094932] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095036] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095175] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095181] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095191] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095252] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095392] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095398] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095407] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095515] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095607] pci 0000:05:00.0: PME# supported from D3hot Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095614] pci 0000:05:00.0: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095642] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095782] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095788] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095797] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095859] pci 0000:06:01.0: reg 10: [mem 0xd0100000-0xd0101fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095916] pci 0000:06:01.0: supports D1 D2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095918] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095924] pci 0000:06:01.0: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.095969] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096009] pci 0000:06:04.0: supports D1 D2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096011] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096018] pci 0000:06:04.0: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096060] pci 0000:06:04.1: reg 10: [mem 0xd0103000-0xd010307f] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096132] pci 0000:06:04.1: supports D1 D2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096134] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096140] pci 0000:06:04.1: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096183] pci 0000:06:04.2: reg 10: [mem 0xd0103400-0xd01034ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096255] pci 0000:06:04.2: supports D1 D2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096257] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096263] pci 0000:06:04.2: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096306] pci 0000:06:04.3: reg 10: [mem 0xd0103800-0xd010387f] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096377] pci 0000:06:04.3: supports D1 D2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096380] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096386] pci 0000:06:04.3: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096430] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096501] pci 0000:06:04.4: supports D1 D2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096504] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096510] pci 0000:06:04.4: PME# disabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096574] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096719] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096725] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096733] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096737] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096744] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.096797] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097035] pci_bus 0000:00: on NUMA node 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.097875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.103401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.103948] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.104522] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.105109] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.105682] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.106368] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.106937] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.107513] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.108128] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.108372] vgaarb: loaded Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.108685] SCSI subsystem initialized Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.108851] libata version 3.00 loaded. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.109063] usbcore: registered new interface driver usbfs Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.109246] usbcore: registered new interface driver hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.109432] usbcore: registered new device driver usb Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.109823] PCI: Using ACPI for IRQ routing Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.109959] PCI: pci_cache_line_size set to 64 bytes Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110098] reserve RAM buffer: 000000000009f800 - 000000000009ffff Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110102] reserve RAM buffer: 000000003f680000 - 000000003fffffff Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110349] cfg80211: Calling CRDA to update world regulatory domain Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110538] NetLabel: Initializing Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110671] NetLabel: domain hash size = 128 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110805] NetLabel: protocols = UNLABELED CIPSOv4 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.110953] NetLabel: unlabeled traffic allowed by default Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.111105] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.111373] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.113016] Switching to clocksource tsc Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.115187] pnp: PnP ACPI init Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.115360] ACPI: bus type pnp registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.139271] pnp: PnP ACPI: found 10 devices Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.139407] ACPI: ACPI bus type pnp unregistered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.139555] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.139695] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.139837] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.139978] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140118] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140271] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140415] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140560] system 00:06: [io 0x0800-0x080f] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140699] system 00:06: [io 0x1000-0x107f] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140839] system 00:06: [io 0x1180-0x11bf] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.140978] system 00:06: [io 0x1640-0x164f] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.141117] system 00:06: [io 0xfe00-0xfefe] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.141267] system 00:06: [io 0xff2c-0xff2f] has been reserved Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.176109] pci 0000:00:1e.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.176358] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.176500] pci 0000:00:1c.0: BAR 9: assigned [mem 0x44200000-0x443fffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.176736] pci 0000:00:1c.1: BAR 8: assigned [mem 0x44400000-0x445fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.176878] pci 0000:00:1c.1: BAR 9: assigned [mem 0x44600000-0x447fffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.177115] pci 0000:00:1c.2: BAR 8: assigned [mem 0x44800000-0x449fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.177267] pci 0000:00:1c.2: BAR 9: assigned [mem 0x44a00000-0x44bfffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.177502] pci 0000:00:1c.3: BAR 9: assigned [mem 0x44c00000-0x44dfffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.177736] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.177876] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178016] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178155] pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178306] pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178446] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178585] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178728] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.178872] pci 0000:00:1c.0: bridge window [mem 0x44200000-0x443fffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.179113] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.179263] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.179406] pci 0000:00:1c.1: bridge window [mem 0x44400000-0x445fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.179549] pci 0000:00:1c.1: bridge window [mem 0x44600000-0x447fffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.179790] pci 0000:00:1c.2: PCI bridge to [bus 04-04] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.179929] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.180072] pci 0000:00:1c.2: bridge window [mem 0x44800000-0x449fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.180226] pci 0000:00:1c.2: bridge window [mem 0x44a00000-0x44bfffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.180469] pci 0000:00:1c.3: PCI bridge to [bus 05-05] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.180607] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.180749] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.180893] pci 0000:00:1c.3: bridge window [mem 0x44c00000-0x44dfffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.181134] pci 0000:06:04.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.181380] pci 0000:06:04.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.181521] pci 0000:06:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.181668] pci 0000:06:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.181909] pci 0000:06:04.0: BAR 7: assigned [io 0x7000-0x70ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.182048] pci 0000:06:04.0: BAR 8: assigned [io 0x7400-0x74ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.182197] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0103100-0xd01031ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.182341] pci 0000:06:04.4: BAR 0: set to [mem 0xd0103100-0xd01031ff] (PCI address [0xd0103100-0xd01031ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.182581] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.182718] pci 0000:06:04.0: bridge window [io 0x7000-0x70ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.182862] pci 0000:06:04.0: bridge window [io 0x7400-0x74ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.183005] pci 0000:06:04.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.183253] pci 0000:06:04.0: bridge window [mem 0x48000000-0x4bffffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.183398] pci 0000:00:1e.0: PCI bridge to [bus 06-07] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.183537] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.183680] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.183824] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.184070] pci 0000:00:1c.0: enabling device (0100 -> 0103) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.184402] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.184542] PCI: setting IRQ 11 as level-triggered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.184549] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.184789] pci 0000:00:1c.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.184959] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185097] PCI: setting IRQ 6 as level-triggered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185104] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185356] pci 0000:00:1c.1: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185527] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185666] PCI: setting IRQ 10 as level-triggered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185672] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.185912] pci 0000:00:1c.2: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186081] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186234] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186473] pci 0000:00:1c.3: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186479] pci 0000:00:1e.0: enabling device (0004 -> 0007) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186623] pci 0000:00:1e.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186637] pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186876] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186879] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186882] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186885] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186889] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186892] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186895] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186899] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186902] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186905] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186908] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186911] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186914] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186918] pci_bus 0000:05: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186921] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186924] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186927] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186930] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186933] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186936] pci_bus 0000:07: resource 0 [io 0x7000-0x70ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186939] pci_bus 0000:07: resource 1 [io 0x7400-0x74ff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186942] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186946] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.186972] NET: Registered protocol family 2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.187157] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.187537] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.188547] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.188897] TCP: Hash tables configured (established 131072 bind 65536) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.189036] TCP reno registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.189170] UDP hash table entries: 512 (order: 1, 8192 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.189332] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.189562] NET: Registered protocol family 1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.189808] RPC: Registered udp transport module. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.189944] RPC: Registered tcp transport module. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190080] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190260] pci 0000:00:02.0: Boot video device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190283] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190285] pci 0000:00:1d.0: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190307] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190309] pci 0000:00:1d.1: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190329] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190331] pci 0000:00:1d.2: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190351] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190353] pci 0000:00:1d.3: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190418] PCI: CLS mismatch (64 != 32), using 64 bytes Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.190562] Simple Boot Flag at 0x36 set to 0x1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.191341] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.191526] microcode: Microcode Update Driver: v2.00 , Peter Oruba Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.191764] Scanning for low memory corruption every 60 seconds Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.192316] audit: initializing netlink socket (disabled) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.192467] type=2000 audit(1279504201.192:1): initialized Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.224321] HugeTLB registered 4 MB page size, pre-allocated 0 pages Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.227674] VFS: Disk quotas dquot_6.5.2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.227887] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.228901] msgmni has been set to 1762 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.229136] SELinux: Registering netfilter hooks Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.229343] cryptomgr_test used greatest stack depth: 6976 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.230274] alg: No test for stdrng (krng) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.230563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.230798] io scheduler noop registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.230931] io scheduler deadline registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.231081] io scheduler cfq registered (default) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.231366] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.231546] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.231718] pcieport 0000:00:1c.2: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.231896] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.232135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.235951] Non-volatile memory driver v1.3 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.236120] intel_rng: FWH not detected Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.236276] Linux agpgart interface v0.103 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.236424] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.236879] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.239753] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.242247] ACPI: AC Adapter [ACAD] (on-line) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.242550] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.242832] ACPI: Lid Switch [LID] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.243048] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.243304] ACPI: Sleep Button [SLPB] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.246216] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.246454] ACPI: Power Button [PWRB] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.246682] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.246917] ACPI: Power Button [PWRF] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.247483] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.247721] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.248386] Marking TSC unstable due to TSC halts in idle Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.248620] Switching to clocksource hpet Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.275030] ACPI: EC: GPE storm detected, transactions will use polling mode Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.275420] thermal LNXTHERM:01: registered as thermal_zone0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.275564] ACPI: Thermal Zone [TZ00] (34 C) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.285074] thermal LNXTHERM:02: registered as thermal_zone1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.285221] ACPI: Thermal Zone [TZ01] (34 C) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.285466] [drm] Initialized drm 1.1.0 20060810 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.285622] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.285858] i915 0000:00:02.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.288639] [drm] set up 7M of stolen space Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.392302] [drm] initialized overlay support Jul 19 01:50:23 OnlyTux-Poland kernel: [ 0.662076] ACPI: Battery Slot [BAT1] (battery absent) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.081831] Console: switching to colour frame buffer device 160x50 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.087229] fb0: inteldrmfb frame buffer device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.087272] registered panic notifier Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.087314] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.087438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.090066] brd: module loaded Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.091147] loop: module loaded Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.091519] ata_piix 0000:00:1f.2: version 2.13 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.091543] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.091625] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.242040] ata_piix 0000:00:1f.2: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.242108] scsi0 : ata_piix Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.242268] scsi1 : ata_piix Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.243541] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.243608] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.244212] console [netcon0] enabled Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.244251] netconsole: network logging started Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.244354] usbcore: registered new interface driver libusual Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.244507] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.247754] i8042.c: Detected active multiplexing controller, rev 1.1. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.247890] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.247941] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.248061] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.248113] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.248162] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.248386] mice: PS/2 mouse device common for all mice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.248919] rtc_cmos 00:07: RTC can wake from S4 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.249057] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.250303] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.251568] i2c /dev entries driver Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.253255] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.254853] cpuidle: using governor ladder Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.256361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.258059] khelper used greatest stack depth: 6972 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.259831] cpuidle: using governor menu Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.262582] usbcore: registered new interface driver hiddev Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.264396] usbcore: registered new interface driver usbhid Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.265996] usbhid: USB HID core driver Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.267893] GACT probability on Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.269525] Mirror/redirect action on Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.271193] Simple TC action Loaded Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.273133] netem: version 1.2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.274829] u32 classifier Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.276550] Performance counters on Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.278283] input device check on Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.280044] Actions configured Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.281842] Netfilter messages via NETLINK v0.30. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.283643] nf_conntrack version 0.5.0 (14100 buckets, 56400 max) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.285615] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.287457] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.289284] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.291262] ctnetlink v0.93: registering with nfnetlink. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.293095] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.294973] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.296836] xt_time: kernel timezone is -0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.299255] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.301112] ClusterIP Version 0.8 loaded successfully Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.303027] arp_tables: (C) 2002 David S. Miller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.304883] TCP cubic registered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.306741] Initializing XFRM netlink socket Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.308596] NET: Registered protocol family 17 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.310520] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.312575] PM: Resume from disk failed. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.312593] registered taskstats version 1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.314811] Magic number: 2:324:812 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.397553] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.399389] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.407513] ata1.00: configured for UDMA/100 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.409484] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.411765] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.413796] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.415894] sd 0:0:0:0: [sda] Write Protect is off Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.417883] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.417990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.420286] sda: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.436426] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.440678] sda1 sda2 sda3 sda4 < sda5 sda6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.481329] ata2.00: configured for UDMA/33 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.488876] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.498683] sda7 > Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.501418] sd 0:0:0:0: [sda] Attached SCSI disk Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.503456] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.505457] Uniform CD-ROM driver Revision: 3.20 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.507599] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.507702] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.869198] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.901931] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.938693] kjournald starting. Commit interval 5 seconds Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.940842] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.943038] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.945241] Freeing unused kernel memory: 328k freed Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.947619] Write protecting the kernel text: 3496k Jul 19 01:50:23 OnlyTux-Poland kernel: [ 1.949870] Write protecting the kernel read-only data: 1704k Jul 19 01:50:23 OnlyTux-Poland kernel: [ 2.417055] async/0 used greatest stack depth: 6544 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 3.305671] stty used greatest stack depth: 6364 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.698141] udev: starting version 149 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.835787] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.835796] ACPI: resource 0000:00:1f.3 [io 0x5420-0x543f] conflicts with ACPI region SMBI [??? 0x00005420-0x0000542f flags 0x49] Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.835799] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954504] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954767] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954770] PCI: setting IRQ 5 as level-triggered Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954778] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954797] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954801] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954823] drivers/usb/core/inode.c: creating file 'devices' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954831] drivers/usb/core/inode.c: creating file '001' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954835] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954846] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954851] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954867] ehci_hcd 0000:00:1d.7: using broken periodic workaround Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954880] ehci_hcd 0000:00:1d.7: debug port 1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.954886] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.958770] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.958772] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.982329] ath5k 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.982342] ath5k 0000:05:00.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 4.982377] ath5k 0000:05:00.0: registered as 'phy0' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.453115] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0544000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.453123] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.457026] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506108] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506167] usb usb1: default language 0x0409 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506175] usb usb1: udev 1, busnum 1, minor = 0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506181] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506185] usb usb1: Product: EHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506187] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506190] usb usb1: SerialNumber: 0000:00:1d.7 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506268] usb usb1: usb_probe_device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506272] usb usb1: configuration #1 chosen from 1 choice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506280] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506307] hub 1-0:1.0: usb_probe_interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506310] hub 1-0:1.0: usb_probe_interface - got id Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506313] hub 1-0:1.0: USB hub found Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506318] hub 1-0:1.0: 8 ports detected Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506320] hub 1-0:1.0: standalone hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506322] hub 1-0:1.0: no power switching (usb 1.0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506325] hub 1-0:1.0: individual port over-current protection Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506328] hub 1-0:1.0: power on to power good time: 20ms Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506332] hub 1-0:1.0: local power source is good Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506335] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.506375] drivers/usb/core/inode.c: creating file '001' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510605] uhci_hcd: USB Universal Host Controller Interface driver Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510681] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510693] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510697] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510706] drivers/usb/core/inode.c: creating file '002' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510713] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510722] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510729] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510731] uhci_hcd 0000:00:1d.0: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510749] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510759] uhci_hcd 0000:00:1d.0: irq 5, io base 0x000050a0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510803] usb usb2: default language 0x0409 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510811] usb usb2: udev 1, busnum 2, minor = 128 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510814] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510817] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510820] usb usb2: Product: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510822] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.510825] usb usb2: SerialNumber: 0000:00:1d.0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511273] usb usb2: usb_probe_device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511278] usb usb2: configuration #1 chosen from 1 choice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511287] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511372] hub 2-0:1.0: usb_probe_interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511375] hub 2-0:1.0: usb_probe_interface - got id Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511378] hub 2-0:1.0: USB hub found Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511384] hub 2-0:1.0: 2 ports detected Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511386] hub 2-0:1.0: standalone hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511388] hub 2-0:1.0: no power switching (usb 1.0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511391] hub 2-0:1.0: individual port over-current protection Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511394] hub 2-0:1.0: power on to power good time: 2ms Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511398] hub 2-0:1.0: local power source is good Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511401] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511419] drivers/usb/core/inode.c: creating file '001' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511459] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511481] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511490] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511494] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511500] drivers/usb/core/inode.c: creating file '003' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511504] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511513] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511518] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511521] uhci_hcd 0000:00:1d.1: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511538] uhci_hcd 0000:00:1d.1: supports USB remote wakeup Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511545] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000050c0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511583] usb usb3: default language 0x0409 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511591] usb usb3: udev 1, busnum 3, minor = 256 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511594] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511597] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511600] usb usb3: Product: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511602] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511605] usb usb3: SerialNumber: 0000:00:1d.1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511959] usb usb3: usb_probe_device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511963] usb usb3: configuration #1 chosen from 1 choice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.511973] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512096] hub 3-0:1.0: usb_probe_interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512099] hub 3-0:1.0: usb_probe_interface - got id Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512101] hub 3-0:1.0: USB hub found Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512107] hub 3-0:1.0: 2 ports detected Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512109] hub 3-0:1.0: standalone hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512111] hub 3-0:1.0: no power switching (usb 1.0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512113] hub 3-0:1.0: individual port over-current protection Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512116] hub 3-0:1.0: power on to power good time: 2ms Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512120] hub 3-0:1.0: local power source is good Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512123] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512139] drivers/usb/core/inode.c: creating file '001' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512176] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512197] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512205] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512209] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512215] drivers/usb/core/inode.c: creating file '004' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512220] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512228] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512234] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512237] uhci_hcd 0000:00:1d.2: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512253] uhci_hcd 0000:00:1d.2: supports USB remote wakeup Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512261] uhci_hcd 0000:00:1d.2: irq 10, io base 0x000050e0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512302] usb usb4: default language 0x0409 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512309] usb usb4: udev 1, busnum 4, minor = 384 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512312] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512315] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512318] usb usb4: Product: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512320] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512323] usb usb4: SerialNumber: 0000:00:1d.2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512669] usb usb4: usb_probe_device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512674] usb usb4: configuration #1 chosen from 1 choice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512682] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512768] hub 4-0:1.0: usb_probe_interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512770] hub 4-0:1.0: usb_probe_interface - got id Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512773] hub 4-0:1.0: USB hub found Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512779] hub 4-0:1.0: 2 ports detected Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512781] hub 4-0:1.0: standalone hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512783] hub 4-0:1.0: no power switching (usb 1.0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512785] hub 4-0:1.0: individual port over-current protection Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512788] hub 4-0:1.0: power on to power good time: 2ms Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512792] hub 4-0:1.0: local power source is good Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512795] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512811] drivers/usb/core/inode.c: creating file '001' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512849] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512869] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512877] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512881] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512887] drivers/usb/core/inode.c: creating file '005' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512892] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512900] uhci_hcd 0000:00:1d.3: detected 2 ports Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512906] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512908] uhci_hcd 0000:00:1d.3: Performing full reset Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512925] uhci_hcd 0000:00:1d.3: supports USB remote wakeup Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512933] uhci_hcd 0000:00:1d.3: irq 6, io base 0x00005400 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512969] usb usb5: default language 0x0409 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512977] usb usb5: udev 1, busnum 5, minor = 512 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512980] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512983] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512986] usb usb5: Product: UHCI Host Controller Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512988] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.512991] usb usb5: SerialNumber: 0000:00:1d.3 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513123] usb usb5: usb_probe_device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513126] usb usb5: configuration #1 chosen from 1 choice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513133] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513195] hub 5-0:1.0: usb_probe_interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513198] hub 5-0:1.0: usb_probe_interface - got id Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513200] hub 5-0:1.0: USB hub found Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513205] hub 5-0:1.0: 2 ports detected Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513207] hub 5-0:1.0: standalone hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513209] hub 5-0:1.0: no power switching (usb 1.0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513211] hub 5-0:1.0: individual port over-current protection Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513214] hub 5-0:1.0: power on to power good time: 2ms Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513218] hub 5-0:1.0: local power source is good Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513220] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513235] drivers/usb/core/inode.c: creating file '001' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.513265] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.516247] ath: EEPROM regdomain: 0x65 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.516251] ath: EEPROM indicates we should expect a direct regpair map Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.516255] ath: Country alpha2 being used: 00 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.516257] ath: Regpair used: 0x65 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.518700] phy0: Selected rate control algorithm 'minstrel' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.519099] Registered led device: ath5k-phy0::rx Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.519116] Registered led device: ath5k-phy0::tx Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.519119] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.606076] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.606082] hub 1-0:1.0: port 7: status 0501 change 0001 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.611050] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.612052] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.612055] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.613035] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.627109] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.627115] b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.627128] b44 0000:06:01.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.635064] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.635073] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.635081] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.654161] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.654382] b44: b44.c:v2.0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.662741] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:cf:59:6b Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.706221] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.706234] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.706245] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.757059] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.757089] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.757095] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.757105] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.757112] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.761719] sdhci: Secure Digital Host Controller Interface driver Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.761723] sdhci: Copyright(c) Pierre Ossman Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.768884] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.768901] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.768913] sdhci-pci 0000:06:04.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769038] Registered led device: mmc0:: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769102] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769118] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769133] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769141] sdhci-pci 0000:06:04.4: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769314] Registered led device: mmc1:: Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.769459] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.862057] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 5.964058] usb 5-1: new low speed USB device using uhci_hcd and address 2 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.105984] usb 5-1: skipped 1 descriptor after interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.110990] usb 5-1: default language 0x0409 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.128981] usb 5-1: udev 2, busnum 5, minor = 513 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.128984] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.128987] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.128990] usb 5-1: Product: Compact Optical Mouse 500 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.128993] usb 5-1: Manufacturer: Microsoft Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.129099] usb 5-1: usb_probe_device Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.129103] usb 5-1: configuration #1 chosen from 1 choice Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.141983] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.142056] usbhid 5-1:1.0: usb_probe_interface Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.142060] usbhid 5-1:1.0: usb_probe_interface - got id Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.156397] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.156579] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.156608] drivers/usb/core/inode.c: creating file '002' Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.426562] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.426568] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.426604] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.518334] blkid used greatest stack depth: 6328 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.596765] fstab_import used greatest stack depth: 6248 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.704049] usb usb2: suspend_rh (auto-stop) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.704077] usb usb3: suspend_rh (auto-stop) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 6.704104] usb usb4: suspend_rh (auto-stop) Jul 19 01:50:23 OnlyTux-Poland kernel: [ 7.114048] lvm used greatest stack depth: 6100 bytes left Jul 19 01:50:23 OnlyTux-Poland kernel: [ 7.418895] EXT3-fs (sda6): using internal journal Jul 19 01:50:23 OnlyTux-Poland kernel: [ 8.700319] kjournald starting. Commit interval 5 seconds Jul 19 01:50:23 OnlyTux-Poland kernel: [ 8.700533] EXT3-fs (sda7): using internal journal Jul 19 01:50:23 OnlyTux-Poland kernel: [ 8.700538] EXT3-fs (sda7): mounted filesystem with writeback data mode Jul 19 01:50:23 OnlyTux-Poland kernel: [ 8.719811] NTFS driver 2.1.29 [Flags: R/O MODULE]. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 8.766527] NTFS volume version 3.1. Jul 19 01:50:23 OnlyTux-Poland kernel: [ 8.887967] Adding 795180k swap on /dev/sda5. Priority:-1 extents:1 across:795180k Jul 19 01:50:24 OnlyTux-Poland acpid: starting up with proc fs Jul 19 01:50:24 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/. Jul 19 01:50:24 OnlyTux-Poland acpid: skipping conf file /etc/acpi/events/.. Jul 19 01:50:24 OnlyTux-Poland acpid: 1 rule loaded Jul 19 01:50:24 OnlyTux-Poland acpid: waiting for events: event logging is off Jul 19 01:50:25 OnlyTux-Poland acpid: client connected from 3124[0:0] Jul 19 01:50:25 OnlyTux-Poland acpid: 1 client rule loaded Jul 19 01:50:25 OnlyTux-Poland /usr/sbin/gpm[3185]: *** info [daemon/startup.c(136)]: Jul 19 01:50:25 OnlyTux-Poland /usr/sbin/gpm[3185]: Started gpm successfully. Entered daemon mode. Jul 19 01:50:25 OnlyTux-Poland kernel: [ 19.925657] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Jul 19 01:50:25 OnlyTux-Poland /usr/sbin/gpm[3185]: *** info [mice.c(1988)]: Jul 19 01:50:25 OnlyTux-Poland /usr/sbin/gpm[3185]: imps2: Auto-detected intellimouse PS/2 Jul 19 01:50:27 OnlyTux-Poland acpid: client connected from 3452[102:1002] Jul 19 01:50:27 OnlyTux-Poland acpid: 1 client rule loaded Jul 19 01:50:28 OnlyTux-Poland dhcpcd[3972]: eth0: dhcpcd 4.0.15 starting Jul 19 01:50:29 OnlyTux-Poland dhcpcd[3972]: eth0: broadcasting for a lease Jul 19 01:50:31 OnlyTux-Poland kernel: [ 26.704242] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Jul 19 01:50:31 OnlyTux-Poland kernel: [ 26.704246] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Jul 19 01:50:32 OnlyTux-Poland dhcpcd[3972]: eth0: offered 192.168.1.4 from 192.168.1.1 Jul 19 01:50:32 OnlyTux-Poland dhcpcd[3972]: eth0: acknowledged 192.168.1.4 from 192.168.1.1 Jul 19 01:50:32 OnlyTux-Poland dhcpcd[3972]: eth0: checking 192.168.1.4 is available on attached networks Jul 19 01:50:37 OnlyTux-Poland dhcpcd[3972]: eth0: leased 192.168.1.4 for 604800 seconds Jul 19 01:50:38 OnlyTux-Poland cron[4184]: (CRON) STARTUP (V5.0) Jul 19 01:50:47 OnlyTux-Poland login[4251]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jul 19 01:50:47 OnlyTux-Poland login[4258]: ROOT LOGIN on '/dev/tty1' Jul 19 01:50:49 OnlyTux-Poland sshd[4317]: Server listening on 0.0.0.0 port 22. Jul 19 01:50:52 OnlyTux-Poland login[4251]: pam_unix(login:session): session closed for user root Jul 19 01:50:58 OnlyTux-Poland login[4760]: pam_unix(login:session): session opened for user onlyus by LOGIN(uid=0) Jul 19 01:51:01 OnlyTux-Poland acpid: client connected from 4783[0:1000] Jul 19 01:51:01 OnlyTux-Poland acpid: 1 client rule loaded Jul 19 01:51:26 OnlyTux-Poland kernel: [ 81.327471] process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jul 19 01:59:01 OnlyTux-Poland cron[4931]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly) Jul 19 01:59:16 OnlyTux-Poland kernel: [ 551.746958] plugin-containe used greatest stack depth: 5460 bytes left Jul 19 02:00:01 OnlyTux-Poland cron[4933]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 19 02:10:01 OnlyTux-Poland cron[4996]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 19 02:20:01 OnlyTux-Poland cron[5009]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 19 02:30:01 OnlyTux-Poland cron[5024]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 19 02:40:01 OnlyTux-Poland cron[5114]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 19 02:50:01 OnlyTux-Poland cron[5132]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jul 19 02:56:40 OnlyTux-Poland kernel: [ 3995.428057] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jul 19 02:56:40 OnlyTux-Poland kernel: [ 3995.428207] render error detected, EIR: 0x00000000 Jul 19 02:56:40 OnlyTux-Poland kernel: [ 3995.428532] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 252425 at 252425) Jul 19 02:56:40 OnlyTux-Poland kernel: [ 3995.434383] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 93 us Jul 19 02:56:41 OnlyTux-Poland kernel: [ 3996.341242] firefox used greatest stack depth: 5448 bytes left Jul 19 02:56:41 OnlyTux-Poland kernel: [ 3996.343111] X used greatest stack depth: 5324 bytes left Jul 19 02:56:41 OnlyTux-Poland kernel: [ 3996.408415] skype used greatest stack depth: 5140 bytes left Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500079] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500091] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500102] hub 5-0:1.0: port 1, status 0100, change 0003, 12 Mb/s Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500106] usb 5-1: USB disconnect, address 2 Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500108] usb 5-1: unregistering device Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500111] usb 5-1: usb_disable_device nuking all URBs Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.500118] usb 5-1: unregistering interface 5-1:1.0 Jul 19 02:57:40 OnlyTux-Poland kernel: [ 4055.604070] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jul 19 02:57:41 OnlyTux-Poland kernel: [ 4056.686798] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80 Jul 19 02:57:41 OnlyTux-Poland kernel: [ 4056.686809] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 19 02:57:41 OnlyTux-Poland kernel: [ 4056.686819] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.750063] usb usb5: suspend_rh (auto-stop) Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.790069] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.790079] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.790110] usb usb5: wakeup_rh (auto-start) Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.841070] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.841096] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.841104] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.841111] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4056.945070] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.047066] usb 5-1: new low speed USB device using uhci_hcd and address 3 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.188154] usb 5-1: skipped 1 descriptor after interface Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.193148] usb 5-1: default language 0x0409 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211149] usb 5-1: udev 3, busnum 5, minor = 514 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211151] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211155] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211158] usb 5-1: Product: Compact Optical Mouse 500 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211160] usb 5-1: Manufacturer: Microsoft Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211258] usb 5-1: usb_probe_device Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.211262] usb 5-1: configuration #1 chosen from 1 choice Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.224150] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.224205] usbhid 5-1:1.0: usb_probe_interface Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.224208] usbhid 5-1:1.0: usb_probe_interface - got id Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.238661] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.238854] generic-usb 0003:045E:0737.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.238887] drivers/usb/core/inode.c: creating file '003' Jul 19 02:57:42 OnlyTux-Poland kernel: [ 4057.238910] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 Jul 19 02:58:03 OnlyTux-Poland sshd[5212]: Accepted keyboard-interactive/pam for root from 192.168.1.7 port 38511 ssh2 Jul 19 02:58:03 OnlyTux-Poland sshd[5212]: pam_unix(sshd:session): session opened for user root by (uid=0) Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250125] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250136] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250149] hub 5-0:1.0: port 1, status 0100, change 0003, 12 Mb/s Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250153] usb 5-1: USB disconnect, address 3 Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250155] usb 5-1: unregistering device Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250158] usb 5-1: usb_disable_device nuking all URBs Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.250164] usb 5-1: unregistering interface 5-1:1.0 Jul 19 02:58:42 OnlyTux-Poland kernel: [ 4117.354069] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.494592] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80 Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.494604] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.494613] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.500063] usb usb5: suspend_rh (auto-stop) Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.598068] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.598078] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.598131] usb usb5: wakeup_rh (auto-start) Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.649069] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.649094] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.649102] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 Jul 19 02:58:43 OnlyTux-Poland kernel: [ 4118.649110] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4118.753127] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4118.855068] usb 5-1: new low speed USB device using uhci_hcd and address 4 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4118.996178] usb 5-1: skipped 1 descriptor after interface Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.001172] usb 5-1: default language 0x0409 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019172] usb 5-1: udev 4, busnum 5, minor = 515 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019175] usb 5-1: New USB device found, idVendor=045e, idProduct=0737 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019178] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019181] usb 5-1: Product: Compact Optical Mouse 500 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019184] usb 5-1: Manufacturer: Microsoft Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019283] usb 5-1: usb_probe_device Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.019287] usb 5-1: configuration #1 chosen from 1 choice Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.032173] usb 5-1: adding 5-1:1.0 (config #1, interface 0) Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.032227] usbhid 5-1:1.0: usb_probe_interface Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.032230] usbhid 5-1:1.0: usb_probe_interface - got id Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.046672] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input9 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.046858] generic-usb 0003:045E:0737.0003: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.3-1/input0 Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.046890] drivers/usb/core/inode.c: creating file '004' Jul 19 02:58:44 OnlyTux-Poland kernel: [ 4119.046912] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80