broadcom-sta error

wl.err (text/plain), 2.34 KB, created by DaggyStyle on 2010-05-28 13:19:15 UTC

lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:0c:00.0: setting latency timer to 64
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:111 __ioremap_caller+0x352/0x360()
Hardware name: Studio 1535                     
Modules linked in: wl(P+) lib80211 sco bnep rfcomm l2cap crc16 btusb bluetooth 
snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq 
snd_seq_device coretemp snd_hda_codec_atihdmi snd_hda_codec_idt snd_hda_intel 
snd_hda_codec snd_hwdep radeon firewire_ohci firewire_core snd_pcm uvcvideo ttm 
snd_timer drm_kms_helper videodev tg3 ohci1394 cfbcopyarea v4l1_compat 
v4l2_compat_ioctl32 cfbimgblt libphy cfbfillrect snd ieee1394 iTCO_wdt i2c_i801 
snd_page_alloc iTCO_vendor_support intel_agp
Pid: 17632, comm: modprobe Tainted: P           2.6.34 #1
Call Trace:
 [<ffffffff8103eb23>] ? warn_slowpath_common+0x73/0xb0
 [<ffffffff81023e32>] ? __ioremap_caller+0x352/0x360
 [<ffffffffa03e8c4f>] ? wl_free+0x97f/0xca0 [wl]
 [<ffffffff814d55b2>] ? _raw_spin_unlock_irqrestore+0x12/0x40
 [<ffffffff81403caf>] ? pci_conf1_write+0xbf/0xf0
 [<ffffffff814d58de>] ? _raw_spin_lock_irqsave+0x1e/0x50
 [<ffffffff814d55b2>] ? _raw_spin_unlock_irqrestore+0x12/0x40
 [<ffffffff81403caf>] ? pci_conf1_write+0xbf/0xf0
 [<ffffffff814d55b2>] ? _raw_spin_unlock_irqrestore+0x12/0x40
 [<ffffffffa03ec339>] ? wl_pci_probe+0x92/0xb3 [wl]
 [<ffffffff812b93a2>] ? local_pci_probe+0x12/0x20
 [<ffffffff812ba53c>] ? pci_device_probe+0x8c/0xc0
 [<ffffffff8134befa>] ? driver_sysfs_add+0x5a/0x80
 [<ffffffff8134c018>] ? driver_probe_device+0x88/0x180
 [<ffffffff8134c1a3>] ? __driver_attach+0x93/0xa0
 [<ffffffff8134c110>] ? __driver_attach+0x0/0xa0
 [<ffffffff8134b778>] ? bus_for_each_dev+0x58/0x80
 [<ffffffff8134afc0>] ? bus_add_driver+0xb0/0x250
 [<ffffffff8134c490>] ? driver_register+0x70/0x130
 [<ffffffff812ba7ec>] ? __pci_register_driver+0x4c/0xc0
 [<ffffffffa0526000>] ? init_module+0x0/0x1f [wl]
 [<ffffffff810001d4>] ? do_one_initcall+0x34/0x1a0
 [<ffffffff8106f32e>] ? sys_init_module+0xde/0x260
 [<ffffffff810024eb>] ? system_call_fastpath+0x16/0x1b
---[ end trace f550336dfd151e1b ]---
eth%d: 5.60.48.36  driver failed with code 11