* CPV:  dev-perl/Debug-Client-0.11
 * REPO: gentoo
 * USE:  elibc_glibc kernel_linux test userland_GNU x86
>>> Unpacking source...
>>> Unpacking Debug-Client-0.11.tar.gz to /var/tmp/portage/dev-perl/Debug-Client-0.11/work
>>> Source unpacked in /var/tmp/portage/dev-perl/Debug-Client-0.11/work
>>> Preparing source in /var/tmp/portage/dev-perl/Debug-Client-0.11/work/Debug-Client-0.11 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-perl/Debug-Client-0.11/work/Debug-Client-0.11 ...
 * Using ExtUtils::MakeMaker
 * perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLMAN3DIR=none DESTDIR=/var/tmp/portage/dev-perl/Debug-Client-0.11/image/
Checking if your kit is complete...
Looks good
Writing Makefile for Debug::Client
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-perl/Debug-Client-0.11/work/Debug-Client-0.11 ...
make -j14 OTHERLDFLAGS=-Wl,-O1 
cp lib/Debug/Client.pm blib/lib/Debug/Client.pm
>>> Source compiled.
make -j14 test TEST_VERBOSE=1 
PERL_DL_NONLAZY=1 /usr/bin/perl5.10.1 "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00-internal.t ....... 
1..3
ok 1
ok 2
ok 3
ok
t/01-add.t ............ 
1..8
# PID 14820
ok 1 - The object isa Debug::Client
ok 2 - loading line
ok 3 - line 4
Debug::Client: Line is undef. Buffer is '' at t/01-add.t line 37
# Looks like you planned 8 tests but ran 3.
# Looks like your test exited with 255 just after 3.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/8 subtests 
t/02-sub-step_out.t ... 
1..19
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/02-sub-step_out.t line 33
# Looks like you planned 19 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 17/19 subtests 
t/02-sub-step_over.t .. 
1..14
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/02-sub-step_over.t line 33
# Looks like you planned 14 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/14 subtests 
t/02-sub.t ............ 
1..26
ok 1 - line 4
Debug::Client: Line is undef. Buffer is '' at t/02-sub.t line 24
# Looks like you planned 26 tests but ran 1.
# Looks like your test exited with 255 just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 25/26 subtests 
t/03-return.t ......... 
1..13
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/03-return.t line 33
# Looks like you planned 13 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/13 subtests 
t/04-run.t ............ 
1..4
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/04-run.t line 34
# Looks like you planned 4 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/4 subtests 
t/04-run_to_line.t .... 
1..5
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/04-run_to_line.t line 35
# Looks like you planned 5 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/5 subtests 
t/04-run_to_sub.t ..... 
1..5
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/04-run_to_sub.t line 35
# Looks like you planned 5 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/5 subtests 
t/05-execute.t ........ 
1..18
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/05-execute.t line 35
# Looks like you planned 18 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/18 subtests 
t/06-breakpoint.t ..... 
1..6
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/06-breakpoint.t line 33
# Looks like you planned 6 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/6 subtests 
t/07-quit.t ........... 
1..3
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/07-quit.t line 33
# Looks like you planned 3 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/3 subtests 
t/08-recursive.t ...... 
1..38
ok 1 - loading line
ok 2 - line 4
Debug::Client: Line is undef. Buffer is '' at t/08-recursive.t line 36
# Looks like you planned 38 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 36/38 subtests 
t/09-io.t ............. 
1..23
# Dir '/var/tmp/portage/dev-perl/Debug-Client-0.11/temp/K3WUu1zOmC' Path '/var/tmp/portage/dev-perl/Debug-Client-0.11/temp/K3WUu1zOmC'
ok 1 - loading line
ok 2 - line 4
# Perl version '5.010001'
Debug::Client: Line is undef. Buffer is '' at t/09-io.t line 46
# Looks like you planned 23 tests but ran 2.
# Looks like your test exited with 255 just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 21/23 subtests 

Test Summary Report
-------------------
t/01-add.t          (Wstat: 65280 Tests: 3 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 8 tests but ran 3.
t/02-sub-step_out.t (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 19 tests but ran 2.
t/02-sub-step_over.t (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 14 tests but ran 2.
t/02-sub.t          (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 26 tests but ran 1.
t/03-return.t       (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 13 tests but ran 2.
t/04-run.t          (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 4 tests but ran 2.
t/04-run_to_line.t  (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 5 tests but ran 2.
t/04-run_to_sub.t   (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 5 tests but ran 2.
t/05-execute.t      (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 18 tests but ran 2.
t/06-breakpoint.t   (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 6 tests but ran 2.
t/07-quit.t         (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 3 tests but ran 2.
t/08-recursive.t    (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 38 tests but ran 2.
t/09-io.t           (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 23 tests but ran 2.
Files=14, Tests=29, 16 wallclock secs ( 0.09 usr  0.03 sys +  1.22 cusr  0.22 csys =  1.56 CPU)
Result: FAIL
Failed 13/14 test programs. 0/29 subtests failed.
make: *** [test_dynamic] Error 255
 * ERROR: dev-perl/Debug-Client-0.11 failed:
 *   test failed
 * 
 * Call stack:
 *     ebuild.sh, line   54:  Called src_test
 *   environment, line 2801:  Called perl-module_src_test
 *   environment, line 2500:  Called die
 * The specific snippet of code:
 *                   emake test TEST_VERBOSE=${TEST_VERBOSE:-0} || die "test failed";
 * 
 * If you need support, post the output of 'emerge --info =dev-perl/Debug-Client-0.11',
 * the complete build log and the output of 'emerge -pqv =dev-perl/Debug-Client-0.11'.
 * The complete build log is located at '/var/log/portage/build/dev-perl/Debug-Client-0.11:20100521-143048.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-perl/Debug-Client-0.11/temp/environment'.
 * S: '/var/tmp/portage/dev-perl/Debug-Client-0.11/work/Debug-Client-0.11'

>>> Install Debug-Client-0.11 into /var/tmp/portage/dev-perl/Debug-Client-0.11/image/ category dev-perl
make -j14 pure_install 
Installing /var/tmp/portage/dev-perl/Debug-Client-0.11/image/usr/lib/perl5/vendor_perl/5.10.1/Debug/Client.pm
>>> Completed installing Debug-Client-0.11 into /var/tmp/portage/dev-perl/Debug-Client-0.11/image/