0: udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_assoc' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) leds.device_name = 'iwl-phy0' (string) leds.function = 'assoc' (string) info.interfaces = { 'org.freedesktop.Hal.Device.Leds' } (string list) info.addons.singleton = { 'hald-addon-leds' } (string list) info.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0::assoc' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_assoc' (string) info.category = 'leds' (string) info.capabilities = { 'leds' } (string list) 1: udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_TX' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) leds.device_name = 'iwl-phy0' (string) leds.function = 'TX' (string) info.interfaces = { 'org.freedesktop.Hal.Device.Leds' } (string list) info.addons.singleton = { 'hald-addon-leds' } (string list) info.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0::TX' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_TX' (string) info.category = 'leds' (string) info.capabilities = { 'leds' } (string list) 2: udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_RX' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) leds.device_name = 'iwl-phy0' (string) leds.function = 'RX' (string) info.interfaces = { 'org.freedesktop.Hal.Device.Leds' } (string list) info.addons.singleton = { 'hald-addon-leds' } (string list) info.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0::RX' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_RX' (string) info.category = 'leds' (string) info.capabilities = { 'leds' } (string list) 3: udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_radio' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) leds.device_name = 'iwl-phy0' (string) leds.function = 'radio' (string) info.interfaces = { 'org.freedesktop.Hal.Device.Leds' } (string list) info.addons.singleton = { 'hald-addon-leds' } (string list) info.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0::radio' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_radio' (string) info.category = 'leds' (string) info.capabilities = { 'leds' } (string list) 4: udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024' linux.hotplug_type = 3 (0x3) (int) volume.partition.scheme = 'mbr' (string) volume.partition.label = '' (string) volume.partition.uuid = '' (string) volume.partition.type = '0x05' (string) volume.partition.flags = { } (string list) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024' (string) block.device = '/dev/sda4' (string) block.major = 8 (0x8) (int) block.minor = 4 (0x4) (int) block.is_volume = true (bool) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) volume.ignore = true (bool) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.uuid = '' (string) volume.label = '' (string) volume.mount_point = '' (string) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.linux.is_device_mapper = false (bool) volume.is_disc = false (bool) volume.is_partition = true (bool) volume.partition.number = 4 (0x4) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda4' (string) volume.block_size = 512 (0x200) (int) volume.num_blocks = 2 (0x2) (uint64) volume.partition.start = 114109309440 (0x1a9171e200) (uint64) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) info.category = 'volume' (string) info.capabilities = { 'volume', 'block' } (string list) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.size = 1024 (0x400) (uint64) 5: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.x11_options.XkbLayout = 'de' (string) input.device = '/dev/input/event5' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.keymap.data = { 'e025:help', 'e026:setup', 'e027:battery', 'e029:switchvideomode', 'e033:euro', 'e034:dollar', 'e04e:brightnessup', 'e054:bluetooth', 'e055:wlan', 'e056:wlan', 'e057:bluetooth', 'e058:bluetooth', 'e059:brightnessup', 'e06e:brightnessup', 'e06f:brightnessdown', 'e071:f22', 'e072:f22', 'e073:prog2', 'e074:prog1', 'e075:presentation', 'e078:fn', 'e079:f23' } (string list) info.callouts.add = { 'hal-setup-keymap', 'hal-setup-keymap' } (string list) info.addons.singleton = { 'hald-addon-input' } (string list) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) info.subsystem = 'input' (string) info.product = 'AT Translated Set 2 keyboard' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input5/event5' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button' } (string list) linux.device_file = '/dev/input/event5' (string) input.xkb.layout = 'de' (string) 6: udi = '/org/freedesktop/Hal/devices/volume_uuid_f732aaf4_6dab_4c26_8d41_15058a03d244' volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data=' } (string list) volume.unmount.valid_options = { 'lazy' } (string list) linux.hotplug_type = 3 (0x3) (int) org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } (string list) info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f732aaf4_6dab_4c26_8d41_15058a03d244' (string) block.device = '/dev/sda6' (string) block.major = 8 (0x8) (int) block.minor = 6 (0x6) (int) block.is_volume = true (bool) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) volume.ignore = true (bool) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.uuid = 'f732aaf4-6dab-4c26-8d41-15058a03d244' (string) volume.label = '' (string) volume.mount_point = '/home/group/media' (string) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.linux.is_device_mapper = false (bool) volume.is_disc = false (bool) volume.is_partition = true (bool) volume.partition.number = 6 (0x6) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda6' (string) volume.block_size = 512 (0x200) (int) volume.num_blocks = 201117672 (0xbfccfe8) (uint64) volume.partition.start = 217098072576 (0x328c0db200) (uint64) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) info.category = 'volume' (string) info.capabilities = { 'volume', 'block' } (string list) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.size = 102972248064 (0x17f99fd000) (uint64) org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } (string list) org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } (string list) org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } (string list) 7: udi = '/org/freedesktop/Hal/devices/volume_uuid_7a396555_ef6b_4025_96cb_9e8cc43255a2' linux.hotplug_type = 3 (0x3) (int) volume.partition.start = 279659520 (0x10ab4400) (uint64) volume.ignore = true (bool) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.uuid = '7a396555-ef6b-4025-96cb-9e8cc43255a2' (string) volume.label = '' (string) volume.mount_point = '' (string) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.linux.is_device_mapper = false (bool) volume.is_disc = false (bool) volume.is_partition = true (bool) volume.partition.number = 2 (0x2) (int) info.product = 'Volume (swap)' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda2' (string) block.device = '/dev/sda2' (string) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.is_volume = true (bool) volume.block_size = 512 (0x200) (int) volume.num_blocks = 12594960 (0xc02f10) (uint64) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) info.category = 'volume' (string) info.capabilities = { 'volume', 'block' } (string list) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7a396555_ef6b_4025_96cb_9e8cc43255a2' (string) volume.size = 6448619520 (0x1805e2000) (uint64) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) 8: udi = '/org/freedesktop/Hal/devices/volume_uuid_fdecf03c_2a80_489c_b5ac_63378d9bcf24' volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr' } (string list) volume.unmount.valid_options = { 'lazy' } (string list) linux.hotplug_type = 3 (0x3) (int) org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } (string list) info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list) info.product = 'Volume (ext2)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_fdecf03c_2a80_489c_b5ac_63378d9bcf24' (string) block.device = '/dev/sda1' (string) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.is_volume = true (bool) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) volume.ignore = true (bool) volume.fstype = 'ext2' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.uuid = 'fdecf03c-2a80-489c-b5ac-63378d9bcf24' (string) volume.label = '' (string) volume.mount_point = '' (string) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.linux.is_device_mapper = false (bool) volume.is_disc = false (bool) volume.is_partition = true (bool) volume.partition.number = 1 (0x1) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda1' (string) volume.block_size = 512 (0x200) (int) volume.num_blocks = 546147 (0x85563) (uint64) volume.partition.start = 32256 (0x7e00) (uint64) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) info.category = 'volume' (string) info.capabilities = { 'volume', 'block' } (string list) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.size = 279627264 (0x10aac600) (uint64) org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } (string list) org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } (string list) org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } (string list) 9: udi = '/org/freedesktop/Hal/devices/volume_uuid_31d1f094_b284_4391_a4cd_31bf7d9f239d' volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data=' } (string list) volume.unmount.valid_options = { 'lazy' } (string list) linux.hotplug_type = 3 (0x3) (int) org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } (string list) info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_31d1f094_b284_4391_a4cd_31bf7d9f239d' (string) block.device = '/dev/sda5' (string) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.is_volume = true (bool) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) volume.ignore = true (bool) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.uuid = '31d1f094-b284-4391-a4cd-31bf7d9f239d' (string) volume.label = '' (string) volume.mount_point = '/home' (string) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.linux.is_device_mapper = false (bool) volume.is_disc = false (bool) volume.is_partition = true (bool) volume.partition.number = 5 (0x5) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda5' (string) volume.block_size = 512 (0x200) (int) volume.num_blocks = 201149802 (0xbfd4d6a) (uint64) volume.partition.start = 114109341696 (0x1a91726000) (uint64) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) info.category = 'volume' (string) info.capabilities = { 'volume', 'block' } (string list) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.size = 102988698624 (0x17fa9ad400) (uint64) org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } (string list) org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } (string list) org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } (string list) 10: udi = '/org/freedesktop/Hal/devices/volume_uuid_a3519b4d_3a0d_46b6_98b4_909c83276993' volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data=' } (string list) volume.unmount.valid_options = { 'lazy' } (string list) linux.hotplug_type = 3 (0x3) (int) org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } (string list) info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a3519b4d_3a0d_46b6_98b4_909c83276993' (string) block.device = '/dev/sda3' (string) block.major = 8 (0x8) (int) block.minor = 3 (0x3) (int) block.is_volume = true (bool) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) volume.ignore = true (bool) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.uuid = 'a3519b4d-3a0d-46b6-98b4-909c83276993' (string) volume.label = '' (string) volume.mount_point = '/' (string) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.linux.is_device_mapper = false (bool) volume.is_disc = false (bool) volume.is_partition = true (bool) volume.partition.number = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda3' (string) volume.block_size = 512 (0x200) (int) volume.num_blocks = 209728575 (0xc80343f) (uint64) volume.partition.start = 6728279040 (0x191096400) (uint64) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) info.category = 'volume' (string) info.capabilities = { 'volume', 'block' } (string list) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.size = 107381030400 (0x1900687e00) (uint64) org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } (string list) org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } (string list) org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } (string list) 11: udi = '/org/freedesktop/Hal/devices/computer' power_management.is_powersave_set = false (bool) info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq' } (string list) info.subsystem = 'unknown' (string) info.product = 'Computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.version = '0.5.13' (string) org.freedesktop.Hal.version.major = 0 (0x0) (int) org.freedesktop.Hal.version.minor = 5 (0x5) (int) org.freedesktop.Hal.version.micro = 13 (0xd) (int) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.32-gentoo-r7' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.minor = 6 (0x6) (int) system.kernel.version.micro = 32 (0x20) (int) system.kernel.machine = 'x86_64' (string) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = true (bool) power_management.can_hibernate = true (bool) system.hardware.primary_video.vendor = 4318 (0x10de) (int) system.hardware.primary_video.product = 1063 (0x427) (int) system.hardware.serial = 'LXTPG0Z009811178482000' (string) system.hardware.uuid = 'B4969C40-F379-11DC-9F83-91CB0AFFF7A1' (string) system.board.serial = 'LXTPG0Z009811178482000' (string) system.firmware.vendor = 'Phoenix Technologies LTD' (string) system.firmware.version = 'V1.32' (string) system.firmware.release_date = '02/01/2008' (string) system.hardware.vendor = 'Acer' (string) system.hardware.product = 'TravelMate 7720' (string) system.hardware.version = '0100' (string) system.chassis.manufacturer = 'Acer' (string) system.board.product = 'Tangiz' (string) system.board.version = 'Rev' (string) system.board.vendor = 'Acer' (string) system.chassis.type = 'Notebook' (string) system.formfactor = 'laptop' (string) info.callouts.add = { 'hal-storage-cleanup-all-mountpoints' } (string list) info.addons = { 'hald-addon-cpufreq', 'hald-addon-acpi', 'hald-addon-cpufreq', 'hald-addon-acpi' } (string list) power_management.type = 'acpi' (string) power_management.acpi.linux.version = '20090903' (string) power_management.quirk.vbe_post = true (bool) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave', 'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' } (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', 'i', '', '', '', 'b', 'i', 'i', '', '', '', 'b' } (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = { 'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save', 'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save' } (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save', 'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' } (string list) info.capabilities = { 'cpufreq_control' } (string list) 12: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event0' (string) input.product = 'Lid Switch' (string) button.has_state = true (bool) button.type = 'lid' (string) button.state.value = false (bool) info.addons.singleton = { 'hald-addon-input' } (string list) info.subsystem = 'input' (string) info.product = 'Lid Switch' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.switch', 'button' } (string list) linux.device_file = '/dev/input/event0' (string) 13: udi = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' linux.hotplug_type = 3 (0x3) (int) storage.removable.media_size = 320072933376 (0x4a85d56000) (uint64) storage.partitioning_scheme = 'mbr' (string) info.product = 'WDC WD3200BEVT-2' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) block.device = '/dev/sda' (string) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.is_volume = false (bool) storage.bus = 'pci' (string) storage.no_partitions_hint = false (bool) storage.media_check_enabled = false (bool) storage.automount_enabled_hint = true (bool) storage.drive_type = 'disk' (string) storage.model = 'WDC WD3200BEVT-2' (string) storage.vendor = 'ATA' (string) storage.firmware_version = '11.01A11' (string) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD3200BEVT_22ZCT0_WD_WXEZ07L64414' (string) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable.media_available = true (bool) storage.removable = false (bool) storage.size = 320072933376 (0x4a85d56000) (uint64) volume.ignore = true (bool) storage.hotpluggable = false (bool) storage.requires_eject = false (bool) storage.serial = 'WDC_WD3200BEVT-22ZCT0_WD-WXEZ07L64414' (string) storage.lun = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' (string) info.category = 'storage' (string) info.capabilities = { 'storage', 'block' } (string list) info.vendor = 'ATA' (string) 14: udi = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L632H' info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable' } (string list) block.device = '/dev/sr0' (string) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.is_volume = false (bool) storage.bus = 'pci' (string) storage.no_partitions_hint = true (bool) storage.media_check_enabled = true (bool) storage.automount_enabled_hint = true (bool) storage.drive_type = 'cdrom' (string) storage.model = 'CDDVDW TS-L632H' (string) storage.vendor = 'TSSTcorp' (string) storage.firmware_version = 'AC01' (string) storage.lun = 0 (0x0) (int) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable.media_available = false (bool) storage.removable = true (bool) storage.size = 0 (0x0) (uint64) storage.removable.support_async_notification = false (bool) storage.hotpluggable = false (bool) storage.requires_eject = true (bool) info.addons = { 'hald-addon-storage' } (string list) info.category = 'storage' (string) info.capabilities = { 'storage', 'block', 'storage.cdrom' } (string list) storage.partitioning_scheme = '' (string) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.dvdrdl = true (bool) storage.cdrom.dvdram = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) info.product = 'CDDVDW TS-L632H' (string) storage.cdrom.mrw = true (bool) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.write_speeds = { } (string list) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L632H' (string) org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' } (string list) org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' } (string list) org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' } (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' } (string list) storage.cdrom.mrw_w = true (bool) info.udi = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L632H' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' (string) info.vendor = 'TSSTcorp' (string) linux.hotplug_type = 3 (0x3) (int) 15: udi = '/org/freedesktop/Hal/devices/acpi_CPU0' linux.hotplug_type = 4 (0x4) (int) info.product = 'Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.category = 'processor' (string) info.capabilities = { 'processor' } (string list) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) processor.number = 0 (0x0) (int) processor.can_throttle = true (bool) 16: udi = '/org/freedesktop/Hal/devices/acpi_CPU1' linux.hotplug_type = 4 (0x4) (int) info.product = 'Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.category = 'processor' (string) info.capabilities = { 'processor' } (string list) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) processor.number = 1 (0x1) (int) processor.can_throttle = true (bool) 17: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.subsystem = 'sound' (string) info.product = 'ALSA Timer Device' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) alsa.device_file = '/dev/snd/timer' (string) info.category = 'alsa' (string) info.capabilities = { 'alsa' } (string list) alsa.type = 'timer' (string) linux.device_file = '/dev/snd/timer' (string) 18: udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.subsystem = 'sound' (string) info.product = 'OSS Sequencer Device' (string) oss.device_file = '/dev/sequencer2' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) oss.type = 'sequencer' (string) info.category = 'oss' (string) info.capabilities = { 'oss' } (string list) linux.device_file = '/dev/sequencer2' (string) 19: udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.subsystem = 'sound' (string) info.product = 'OSS Sequencer Device' (string) oss.device_file = '/dev/sequencer' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) oss.type = 'sequencer' (string) info.category = 'oss' (string) info.capabilities = { 'oss' } (string list) linux.device_file = '/dev/sequencer' (string) 20: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.subsystem = 'sound' (string) info.product = 'ALSA Sequencer Device' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) alsa.device_file = '/dev/snd/seq' (string) info.category = 'alsa' (string) info.capabilities = { 'alsa' } (string list) alsa.type = 'sequencer' (string) linux.device_file = '/dev/snd/seq' (string) 21: udi = '/org/freedesktop/Hal/devices/net_00_00_00_00' net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) net.interface = 'sit0' (string) net.address = '00:00:00:00' (string) net.linux.ifindex = 4 (0x4) (int) net.arp_proto_hw_id = 776 (0x308) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) info.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/sit0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_00_00_00' (string) info.category = 'net' (string) info.capabilities = { 'net' } (string list) 22: udi = '/org/freedesktop/Hal/devices/net_computer_loopback' net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) net.interface = 'lo' (string) net.address = '00:00:00:00:00:00' (string) net.linux.ifindex = 1 (0x1) (int) net.arp_proto_hw_id = 772 (0x304) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) info.subsystem = 'net' (string) info.product = 'Loopback device Interface' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) info.category = 'net.loopback' (string) info.capabilities = { 'net', 'net.loopback' } (string list) 23: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event4' (string) input.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.product = 'Macintosh mouse button emulation' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.mouse' } (string list) linux.device_file = '/dev/input/event4' (string) 24: udi = '/org/freedesktop/Hal/devices/computer_backlight' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'backlight' (string) info.interfaces = { 'org.freedesktop.Hal.Device.LaptopPanel' } (string list) laptop_panel.access_method = 'general' (string) info.product = 'Generic Backlight Device' (string) laptop_panel.brightness_in_hardware = true (bool) laptop_panel.num_levels = 10 (0xa) (int) info.parent = '/org/freedesktop/Hal/devices/computer' (string) linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0' (string) info.subsystem = 'backlight' (string) info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string) info.category = 'laptop_panel' (string) info.capabilities = { 'laptop_panel' } (string list) info.addons = { 'hald-addon-generic-backlight', 'hald-addon-generic-backlight' } (string list) 25: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event7' (string) input.product = 'SynPS/2 Synaptics TouchPad' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string) info.subsystem = 'input' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio2/input/input7/event7' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port_logicaldev_input' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.touchpad' } (string list) linux.device_file = '/dev/input/event7' (string) 26: udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) info.subsystem = 'scsi_host' (string) info.product = 'SCSI Host Adapter' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_0' (string) scsi_host.host = 3 (0x3) (int) info.category = 'scsi_host' (string) info.capabilities = { 'scsi_host' } (string list) 27: udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0_scsi_generic' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) scsi_generic.device = '/dev/sg1' (string) info.subsystem = 'scsi_generic' (string) info.product = 'SCSI Generic Interface' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/scsi_generic/sg1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0_scsi_generic' (string) info.category = 'scsi_generic' (string) info.capabilities = { 'scsi_generic' } (string list) linux.device_file = '/dev/sg1' (string) 28: udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_host' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) info.subsystem = 'scsi_host' (string) info.product = 'SCSI Host Adapter' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_host' (string) scsi_host.host = 2 (0x2) (int) info.category = 'scsi_host' (string) info.capabilities = { 'scsi_host' } (string list) 29: udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) info.subsystem = 'scsi_host' (string) info.product = 'SCSI Host Adapter' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/scsi_host/host1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_0' (string) scsi_host.host = 1 (0x1) (int) info.category = 'scsi_host' (string) info.capabilities = { 'scsi_host' } (string list) 30: udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0_scsi_generic' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) scsi_generic.device = '/dev/sg0' (string) info.subsystem = 'scsi_generic' (string) info.product = 'SCSI Generic Interface' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0_scsi_generic' (string) info.category = 'scsi_generic' (string) info.capabilities = { 'scsi_generic' } (string list) linux.device_file = '/dev/sg0' (string) 31: udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_host' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) info.subsystem = 'scsi_host' (string) info.product = 'SCSI Host Adapter' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/scsi_host/host0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_host' (string) scsi_host.host = 0 (0x0) (int) info.category = 'scsi_host' (string) info.capabilities = { 'scsi_host' } (string list) 32: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial_if0_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.x11_options.XkbLayout = 'de' (string) input.device = '/dev/input/event12' (string) input.product = 'G11 Keyboard' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial_if0' (string) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) info.subsystem = 'input' (string) info.product = 'G11 Keyboard' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.4/6-2.2.4:1.0/input/input12/event12' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial_if0' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial_if0_logicaldev_input' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button' } (string list) linux.device_file = '/dev/input/event12' (string) input.xkb.layout = 'de' (string) 33: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if1_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event11' (string) input.product = 'Gaming Keyboard' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if1' (string) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) info.subsystem = 'input' (string) info.product = 'Gaming Keyboard' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1/6-2.2.1:1.1/input/input11/event11' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if1' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if1_logicaldev_input' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.keys', 'button' } (string list) linux.device_file = '/dev/input/event11' (string) input.xkb.layout = 'de' (string) 34: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if0_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.x11_options.XkbLayout = 'de' (string) input.device = '/dev/input/event10' (string) input.product = 'Gaming Keyboard' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if0' (string) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) info.subsystem = 'input' (string) info.product = 'Gaming Keyboard' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1/6-2.2.1:1.0/input/input10/event10' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if0' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if0_logicaldev_input' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button' } (string list) linux.device_file = '/dev/input/event10' (string) input.xkb.layout = 'de' (string) 35: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if1_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event9' (string) input.product = 'Logitech USB Receiver' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if1' (string) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) info.subsystem = 'input' (string) info.product = 'Logitech USB Receiver' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input9/event9' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if1' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if1_logicaldev_input' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.keys', 'button' } (string list) linux.device_file = '/dev/input/event9' (string) input.xkb.layout = 'de' (string) 36: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if0_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event8' (string) input.product = 'Logitech USB Receiver' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if0' (string) info.subsystem = 'input' (string) info.product = 'Logitech USB Receiver' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input8/event8' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if0' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if0_logicaldev_input' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.mouse' } (string list) linux.device_file = '/dev/input/event8' (string) 37: udi = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial_if0_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event13' (string) input.product = 'Wacom Intuos4 6x9' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial_if0' (string) info.subsystem = 'input' (string) info.product = 'Wacom Intuos4 6x9' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input13/event13' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial_if0' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial_if0_logicaldev_input' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.tablet' } (string list) linux.device_file = '/dev/input/event13' (string) 38: udi = '/org/freedesktop/Hal/devices/net_00_1d_e0_80_5f_1b' net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) net.interface = 'wlan0' (string) net.address = '00:1d:e0:80:5f:1b' (string) net.linux.ifindex = 3 (0x3) (int) net.arp_proto_hw_id = 1 (0x1) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) net.80211.mac_address = 128320560923 (0x1de0805f1b) (uint64) info.product = 'WLAN Interface' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/net/wlan0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1d_e0_80_5f_1b' (string) info.subsystem = 'net' (string) info.category = 'net.80211' (string) info.capabilities = { 'net', 'net.80211' } (string list) 39: udi = '/org/freedesktop/Hal/devices/pci_8086_4229_rfkill_phy0_wlan' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'rfkill' (string) info.interfaces = { 'org.freedesktop.Hal.Device.KillSwitch' } (string list) killswitch.type = 'wlan' (string) killswitch.state = 1 (0x1) (int) killswitch.access_method = 'rfkill' (string) killswitch.name = 'phy0' (string) info.subsystem = 'rfkill' (string) info.product = 'phy0 wlan Killswitch' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/ieee80211/phy0/rfkill0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_4229_rfkill_phy0_wlan' (string) info.addons.singleton = { 'hald-addon-rfkill-killswitch' } (string list) info.category = 'killswitch' (string) info.capabilities = { 'killswitch' } (string list) info.vendor = 'Intel Corporation' (string) 40: udi = '/org/freedesktop/Hal/devices/net_00_1d_72_25_ba_f5' net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_1693' (string) net.interface = 'eth0' (string) net.address = '00:1d:72:25:ba:f5' (string) net.linux.ifindex = 2 (0x2) (int) net.arp_proto_hw_id = 1 (0x1) (int) net.80203.mac_address = 126469126901 (0x1d7225baf5) (uint64) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) org.freedesktop.Hal.Device.WakeOnLan.method_names = { 'GetSupported', 'GetEnabled', 'SetEnabled' } (string list) info.interfaces = { 'org.freedesktop.Hal.Device.WakeOnLan' } (string list) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = { '', '', 'enable' } (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = { '', '', 'b' } (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = { 'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable' } (string list) info.subsystem = 'net' (string) info.product = 'Networking Interface' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/net/eth0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_1693' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1d_72_25_ba_f5' (string) info.category = 'net.80203' (string) info.capabilities = { 'net', 'net.80203', 'wake_on_lan' } (string list) 41: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_capture_2' alsa.type = 'capture' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.device_file = '/dev/snd/pcmC0D2c' (string) info.subsystem = 'sound' (string) info.product = 'ALC268 Analog ALSA Capture Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D2c' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_capture_2' (string) alsa.device_file = '/dev/snd/pcmC0D2c' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) alsa.card = 0 (0x0) (int) info.capabilities = { 'alsa' } (string list) info.category = 'alsa' (string) alsa.device = 2 (0x2) (int) alsa.pcm_class = 'generic' (string) alsa.card_id = 'HDA Intel' (string) alsa.device_id = 'ALC268 Analog' (string) 42: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_playback_0' alsa.type = 'playback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) info.subsystem = 'sound' (string) info.product = 'ALC268 Analog ALSA Playback Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_playback_0' (string) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) alsa.card = 0 (0x0) (int) info.capabilities = { 'alsa' } (string list) info.category = 'alsa' (string) alsa.device = 0 (0x0) (int) alsa.pcm_class = 'generic' (string) alsa.card_id = 'HDA Intel' (string) alsa.device_id = 'ALC268 Analog' (string) 43: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_capture_0' alsa.type = 'capture' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) info.subsystem = 'sound' (string) info.product = 'ALC268 Analog ALSA Capture Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_capture_0' (string) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) alsa.card = 0 (0x0) (int) info.capabilities = { 'alsa' } (string list) info.category = 'alsa' (string) alsa.device = 0 (0x0) (int) alsa.pcm_class = 'generic' (string) alsa.card_id = 'HDA Intel' (string) alsa.device_id = 'ALC268 Analog' (string) 44: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_mixer__1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_mixer__1' (string) info.subsystem = 'sound' (string) oss.device_file = '/dev/mixer' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) oss.type = 'mixer' (string) oss.device_id = 'ALC268 Analog' (string) info.category = 'oss' (string) info.capabilities = { 'oss' } (string list) info.product = 'ALC268 Analog OSS Control Device' (string) linux.device_file = '/dev/mixer' (string) 45: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.device_file = '/dev/snd/hwC0D1' (string) info.subsystem = 'sound' (string) info.product = 'HDA Intel ALSA hardware specific Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_1' (string) alsa.device_file = '/dev/snd/hwC0D1' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) alsa.card = 0 (0x0) (int) info.capabilities = { 'alsa' } (string list) info.category = 'alsa' (string) alsa.device = 1 (0x1) (int) alsa.type = 'hw_specific' (string) alsa.card_id = 'HDA Intel' (string) 46: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.device_file = '/dev/snd/hwC0D0' (string) info.subsystem = 'sound' (string) info.product = 'HDA Intel ALSA hardware specific Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_0' (string) alsa.device_file = '/dev/snd/hwC0D0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) alsa.card = 0 (0x0) (int) info.capabilities = { 'alsa' } (string list) info.category = 'alsa' (string) alsa.device = 0 (0x0) (int) alsa.type = 'hw_specific' (string) alsa.card_id = 'HDA Intel' (string) 47: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0_0' (string) info.subsystem = 'sound' (string) oss.device_file = '/dev/dsp' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) oss.device = 0 (0x0) (int) oss.device_id = 'ALC268 Analog' (string) info.category = 'oss' (string) info.capabilities = { 'oss' } (string list) info.product = 'ALC268 Analog OSS PCM Device' (string) linux.device_file = '/dev/dsp' (string) oss.type = 'pcm' (string) 48: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_control__1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.device_file = '/dev/snd/controlC0' (string) info.subsystem = 'sound' (string) info.product = 'HDA Intel ALSA Control Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_control__1' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) alsa.card = 0 (0x0) (int) alsa.type = 'control' (string) info.category = 'alsa' (string) info.capabilities = { 'alsa' } (string list) alsa.card_id = 'HDA Intel' (string) 49: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0' (string) info.subsystem = 'sound' (string) oss.device_file = '/dev/audio' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) oss.device = 0 (0x0) (int) oss.device_id = 'ALC268 Analog' (string) info.category = 'oss' (string) info.capabilities = { 'oss' } (string list) info.product = 'ALC268 Analog OSS PCM Device' (string) linux.device_file = '/dev/audio' (string) oss.type = 'pcm' (string) 50: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA Intel' (string) info.product = 'HDA Intel Sound Card' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string) info.subsystem = 'sound' (string) info.category = 'sound' (string) info.capabilities = { 'sound' } (string list) 51: udi = '/org/freedesktop/Hal/devices/pci_8086_284b_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event6' (string) input.product = 'HDA Digital PCBeep' (string) input.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string) info.subsystem = 'input' (string) info.product = 'HDA Digital PCBeep' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/input/input6/event6' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_logicaldev_input' (string) info.category = 'input' (string) info.capabilities = { 'input' } (string list) linux.device_file = '/dev/input/event6' (string) 52: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event1' (string) input.product = 'Sleep Button' (string) button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) input.xkb.layout = 'de' (string) info.subsystem = 'input' (string) info.product = 'Sleep Button' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'button', 'input.keys' } (string list) linux.device_file = '/dev/input/event1' (string) 53: udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) info.subsystem = 'power_supply' (string) info.product = 'GRAPE34' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string) battery.type = 'primary' (string) battery.reporting.technology = 'Li-ion' (string) battery.technology = 'lithium-ion' (string) battery.model = 'GRAPE34' (string) battery.vendor = 'SANYO' (string) battery.voltage.design = 14800 (0x39d0) (int) battery.voltage.unit = 'mV' (string) battery.reporting.design = 4800 (0x12c0) (int) battery.reporting.unit = 'mAh' (string) battery.serial = ' 3834' (string) battery.present = true (bool) battery.voltage.current = 16621 (0x40ed) (int) battery.reporting.rate = 0 (0x0) (int) battery.is_rechargeable = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = false (bool) battery.reporting.current = 4046 (0xfce) (int) battery.reporting.last_full = 4152 (0x1038) (int) battery.charge_level.current = 59880 (0xe9e8) (int) battery.charge_level.last_full = 61449 (0xf009) (int) battery.charge_level.design = 71040 (0x11580) (int) battery.charge_level.rate = 0 (0x0) (int) battery.charge_level.percentage = 97 (0x61) (int) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/PNP0C09:00/PNP0C0A:00/power_supply/BAT0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.category = 'battery' (string) info.capabilities = { 'battery' } (string list) 54: udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) info.subsystem = 'power_supply' (string) info.product = 'Generic AC Adapter Device' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/PNP0C09:00/ACPI0003:00/power_supply/ADP1' (string) ac_adapter.present = true (bool) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP1' (string) info.category = 'ac_adapter' (string) info.capabilities = { 'ac_adapter' } (string list) 55: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event3' (string) input.product = 'Video Bus' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) input.xkb.layout = 'de' (string) info.subsystem = 'input' (string) info.product = 'Video Bus' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input3/event3' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'input.keys', 'button' } (string list) linux.device_file = '/dev/input/event3' (string) 56: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) input.device = '/dev/input/event2' (string) input.product = 'Power Button' (string) button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = { 'hald-addon-input' } (string list) input.xkb.rules = 'base' (string) input.xkb.model = 'evdev' (string) input.xkb.layout = 'de' (string) info.subsystem = 'input' (string) info.product = 'Power Button' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) input.x11_driver = 'evdev' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.xkb.variant = '' (string) input.xkb.options = 'terminate:ctrl_alt_bksp' (string) info.category = 'input' (string) info.capabilities = { 'input', 'button', 'input.keys' } (string list) linux.device_file = '/dev/input/event2' (string) 57: udi = '/org/freedesktop/Hal/devices/pnp_NSC6001' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) pnp.id = 'NSC6001' (string) info.subsystem = 'pnp' (string) info.product = 'PnP Device (NSC6001)' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_NSC6001' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) 58: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) info.linux.driver = 'rtc_cmos' (string) pnp.id = 'PNP0b00' (string) pnp.description = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.product = 'AT Real-Time Clock' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) 59: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) info.linux.driver = 'system' (string) pnp.id = 'PNP0c02' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) 60: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) pnp.id = 'PNP0c04' (string) pnp.description = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.product = 'Math Coprocessor' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) 61: udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) info.linux.driver = 'system' (string) pnp.id = 'PNP0103' (string) info.subsystem = 'pnp' (string) info.product = 'PnP Device (PNP0103)' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) 62: udi = '/org/freedesktop/Hal/devices/pnp_INT0800' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) pnp.id = 'INT0800' (string) info.subsystem = 'pnp' (string) info.product = 'PnP Device (INT0800)' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) 63: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) pnp.id = 'PNP0200' (string) pnp.description = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.product = 'AT DMA Controller' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) 64: udi = '/org/freedesktop/Hal/devices/pnp_SYN0302' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) info.linux.driver = 'i8042 aux' (string) pnp.id = 'SYN0302' (string) info.subsystem = 'pnp' (string) info.product = 'PnP Device (SYN0302)' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SYN0302' (string) 65: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) info.linux.driver = 'i8042 kbd' (string) pnp.id = 'PNP0303' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) 66: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) info.linux.driver = 'system' (string) pnp.id = 'PNP0c02' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) 67: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) pnp.id = 'PNP0a08' (string) info.subsystem = 'pnp' (string) info.product = 'PnP Device (PNP0a08)' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) 68: udi = '/org/freedesktop/Hal/devices/platform_serial8250' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) info.linux.driver = 'serial8250' (string) platform.id = 'serial8250' (string) info.subsystem = 'platform' (string) info.product = 'Platform Device (serial8250)' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) 69: udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) platform.id = 'regulatory.0' (string) info.subsystem = 'platform' (string) info.product = 'Platform Device (regulatory.0)' (string) info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' (string) linux.sysfs_path = '/sys/devices/platform/regulatory.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) 70: udi = '/org/freedesktop/Hal/devices/platform_pcspkr' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) platform.id = 'pcspkr' (string) info.subsystem = 'platform' (string) info.product = 'Platform Device (pcspkr)' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) 71: udi = '/org/freedesktop/Hal/devices/platform_microcode' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) platform.id = 'microcode' (string) info.subsystem = 'platform' (string) info.product = 'Platform Device (microcode)' (string) info.udi = '/org/freedesktop/Hal/devices/platform_microcode' (string) linux.sysfs_path = '/sys/devices/platform/microcode' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) 72: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) serio.id = 'serio4' (string) serio.description = 'i8042 AUX3 port' (string) info.subsystem = 'serio' (string) info.product = 'i8042 AUX3 port' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string) 73: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) serio.id = 'serio3' (string) serio.description = 'i8042 AUX2 port' (string) info.subsystem = 'serio' (string) info.product = 'i8042 AUX2 port' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string) 74: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) info.linux.driver = 'psmouse' (string) serio.id = 'serio2' (string) serio.description = 'i8042 AUX1 port' (string) info.subsystem = 'serio' (string) info.product = 'i8042 AUX1 port' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string) 75: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) serio.id = 'serio1' (string) serio.description = 'i8042 AUX0 port' (string) info.subsystem = 'serio' (string) info.product = 'i8042 AUX0 port' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' (string) 76: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) info.linux.driver = 'atkbd' (string) serio.id = 'serio0' (string) serio.description = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.product = 'i8042 KBD port' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) 77: udi = '/org/freedesktop/Hal/devices/platform_i8042' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) info.linux.driver = 'i8042' (string) platform.id = 'i8042' (string) info.subsystem = 'platform' (string) info.product = 'Platform Device (i8042)' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) 78: udi = '/org/freedesktop/Hal/devices/pci_8086_283e' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_283e' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) SMBus Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product_id = 10302 (0x283e) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) SMBus Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 79: udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' scsi.vendor = 'ATA' (string) scsi.type = 'disk' (string) info.linux.driver = 'sd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) info.subsystem = 'scsi' (string) info.product = 'SCSI Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' (string) scsi.host = 2 (0x2) (int) scsi.bus = 0 (0x0) (int) scsi.target = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'WDC WD3200BEVT-2' (string) 80: udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) info.subsystem = 'scsi_host' (string) info.product = 'SCSI Host Adapter' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host' (string) scsi_host.host = 2 (0x2) (int) info.category = 'scsi_host' (string) info.capabilities = { 'scsi_host' } (string list) 81: udi = '/org/freedesktop/Hal/devices/pci_8086_2828' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'ata_piix' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828' (string) info.subsystem = 'pci' (string) info.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product_id = 10280 (0x2828) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 1 (0x1) (int) pci.device_subclass = 1 (0x1) (int) pci.device_protocol = 143 (0x8f) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 82: udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' scsi.vendor = 'TSSTcorp' (string) scsi.type = 'cdrom' (string) info.linux.driver = 'sr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) info.subsystem = 'scsi' (string) info.product = 'SCSI Device' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' (string) scsi.host = 0 (0x0) (int) scsi.bus = 0 (0x0) (int) scsi.target = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'CDDVDW TS-L632H' (string) 83: udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) info.subsystem = 'scsi_host' (string) info.product = 'SCSI Host Adapter' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host' (string) scsi_host.host = 0 (0x0) (int) info.category = 'scsi_host' (string) info.capabilities = { 'scsi_host' } (string list) 84: udi = '/org/freedesktop/Hal/devices/pci_8086_2850' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'ata_piix' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850' (string) info.subsystem = 'pci' (string) info.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string) pci.product_id = 10320 (0x2850) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 1 (0x1) (int) pci.device_subclass = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 85: udi = '/org/freedesktop/Hal/devices/pci_8086_2815' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2815' (string) info.subsystem = 'pci' (string) info.product = '82801HEM (ICH8M) LPC Interface Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product_id = 10261 (0x2815) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 1 (0x1) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801HEM (ICH8M) LPC Interface Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 86: udi = '/org/freedesktop/Hal/devices/pci_104c_803c' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_803c' (string) info.subsystem = 'pci' (string) info.product = 'PCIxx12 SDA Standard Compliant SD Host Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.3' (string) pci.product_id = 32828 (0x803c) (int) pci.vendor_id = 4172 (0x104c) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 8 (0x8) (int) pci.device_subclass = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Texas Instruments' (string) info.vendor = 'Texas Instruments' (string) pci.product = 'PCIxx12 SDA Standard Compliant SD Host Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 87: udi = '/org/freedesktop/Hal/devices/pci_104c_803b' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'tifm_7xx1' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_803b' (string) info.subsystem = 'pci' (string) info.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.2' (string) pci.product_id = 32827 (0x803b) (int) pci.vendor_id = 4172 (0x104c) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 1 (0x1) (int) pci.device_subclass = 128 (0x80) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Texas Instruments' (string) info.vendor = 'Texas Instruments' (string) pci.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 88: udi = '/org/freedesktop/Hal/devices/pci_104c_803a' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_803a' (string) info.subsystem = 'pci' (string) info.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.1' (string) pci.product_id = 32826 (0x803a) (int) pci.vendor_id = 4172 (0x104c) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 0 (0x0) (int) pci.device_protocol = 16 (0x10) (int) pci.vendor = 'Texas Instruments' (string) info.vendor = 'Texas Instruments' (string) pci.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 89: udi = '/org/freedesktop/Hal/devices/pci_104c_8039' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'yenta_cardbus' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_8039' (string) info.subsystem = 'pci' (string) info.product = 'PCIxx12 Cardbus Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:0f:06.0' (string) pci.product_id = 32825 (0x8039) (int) pci.vendor_id = 4172 (0x104c) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 7 (0x7) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Texas Instruments' (string) info.vendor = 'Texas Instruments' (string) pci.product = 'PCIxx12 Cardbus Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 90: udi = '/org/freedesktop/Hal/devices/pci_8086_2448' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.subsystem = 'pci' (string) info.product = '82801 Mobile PCI Bridge' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product_id = 9288 (0x2448) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 4 (0x4) (int) pci.device_protocol = 1 (0x1) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801 Mobile PCI Bridge' (string) 91: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 2 (0x2) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 6 (0x6) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 480 (double) usb.version = 2 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 2 (0x2) (int) usb.serial = '0000:00:1d.7' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 92: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 2 (0x2) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '2.0 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '2.0 root hub' (string) usb_device.num_ports = 6 (0x6) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 480 (double) usb_device.version = 2 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 2 (0x2) (int) usb_device.serial = '0000:00:1d.7' (string) linux.device_file = '/dev/bus/usb/002/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2836' (string) info.vendor = 'Linux Foundation' (string) 93: udi = '/org/freedesktop/Hal/devices/pci_8086_2836' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'ehci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2836' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product_id = 10294 (0x2836) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 32 (0x20) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 94: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 1 (0x1) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 7 (0x7) (int) usb.serial = '0000:00:1d.2' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 95: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 1 (0x1) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '1.1 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '1.1 root hub' (string) usb_device.num_ports = 2 (0x2) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 7 (0x7) (int) usb_device.serial = '0000:00:1d.2' (string) linux.device_file = '/dev/bus/usb/007/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2832' (string) info.vendor = 'Linux Foundation' (string) 96: udi = '/org/freedesktop/Hal/devices/pci_8086_2832' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'uhci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2832' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product_id = 10290 (0x2832) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 97: udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1423 (0x58f) (int) usb.product_id = 37460 (0x9254) (int) usb.vendor = 'Alcor Micro Corp.' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 786 (0x312) (int) usb.num_ports = 4 (0x4) (int) usb.linux.device_number = 3 (0x3) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 100 (0x64) (int) usb.can_wake_up = true (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 98: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1133 (0x46d) (int) usb.product_id = 49699 (0xc223) (int) usb.vendor = 'Logitech, Inc.' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 369 (0x171) (int) usb.num_ports = 4 (0x4) (int) usb.linux.device_number = 4 (0x4) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 100 (0x64) (int) usb.can_wake_up = false (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 99: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usbhid' (string) info.subsystem = 'usb' (string) info.product = 'USB HID Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.4/6-2.2.4:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1133 (0x46d) (int) usb.product_id = 49701 (0xc225) (int) usb.vendor = 'Logitech, Inc.' (string) usb.product = 'USB HID Interface' (string) usb.device_revision_bcd = 369 (0x171) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 6 (0x6) (int) usb.speed = 12 (double) usb.version = 2 (double) usb.max_power = 100 (0x64) (int) usb.can_wake_up = false (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.4/6-2.2.4:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.protocol = 0 (0x0) (int) 100: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.4' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.product_id = 49701 (0xc225) (int) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.product = 'G11 Keyboard' (string) usb_device.device_revision_bcd = 369 (0x171) (int) info.subsystem = 'usb_device' (string) info.product = 'G11 Keyboard' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.4' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial' (string) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.device_number = 6 (0x6) (int) usb_device.max_power = 100 (0x64) (int) usb_device.speed = 12 (double) usb_device.version = 2 (double) usb_device.is_self_powered = false (bool) usb_device.can_wake_up = false (bool) usb_device.bus_number = 6 (0x6) (int) linux.device_file = '/dev/bus/usb/006/006' (string) info.vendor = 'Logitech, Inc.' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c225_noserial' (string) 101: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usbhid' (string) info.subsystem = 'usb' (string) info.product = 'USB HID Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if1' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1/6-2.2.1:1.1' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1133 (0x46d) (int) usb.product_id = 49697 (0xc221) (int) usb.vendor = 'Logitech, Inc.' (string) usb.product = 'USB HID Interface' (string) usb.device_revision_bcd = 400 (0x190) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 5 (0x5) (int) usb.speed = 1.5 (double) usb.version = 2 (double) usb.max_power = 100 (0x64) (int) usb.can_wake_up = true (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.interface.number = 1 (0x1) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1/6-2.2.1:1.1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.protocol = 0 (0x0) (int) 102: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usbhid' (string) info.subsystem = 'usb' (string) info.product = 'USB HID Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1/6-2.2.1:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1133 (0x46d) (int) usb.product_id = 49697 (0xc221) (int) usb.vendor = 'Logitech, Inc.' (string) usb.product = 'USB HID Interface' (string) usb.device_revision_bcd = 400 (0x190) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 5 (0x5) (int) usb.speed = 1.5 (double) usb.version = 2 (double) usb.max_power = 100 (0x64) (int) usb.can_wake_up = true (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1/6-2.2.1:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial' (string) usb.interface.subclass = 1 (0x1) (int) usb.interface.class = 3 (0x3) (int) usb.interface.protocol = 1 (0x1) (int) 103: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.product_id = 49697 (0xc221) (int) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.product = 'G15 Keyboard / Keyboard' (string) usb_device.device_revision_bcd = 400 (0x190) (int) info.subsystem = 'usb_device' (string) info.product = 'G15 Keyboard / Keyboard' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2.1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial' (string) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.device_number = 5 (0x5) (int) usb_device.max_power = 100 (0x64) (int) usb_device.speed = 1.5 (double) usb_device.version = 2 (double) usb_device.is_self_powered = false (bool) usb_device.can_wake_up = true (bool) usb_device.bus_number = 6 (0x6) (int) linux.device_file = '/dev/bus/usb/006/005' (string) info.vendor = 'Logitech, Inc.' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c221_noserial' (string) 104: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.product_id = 49699 (0xc223) (int) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.product = 'G15 Keyboard / USB Hub' (string) usb_device.device_revision_bcd = 369 (0x171) (int) info.subsystem = 'usb_device' (string) info.product = 'G15 Keyboard / USB Hub' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial' (string) usb_device.num_ports = 4 (0x4) (int) usb_device.linux.device_number = 4 (0x4) (int) usb_device.max_power = 100 (0x64) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.is_self_powered = false (bool) usb_device.can_wake_up = false (bool) usb_device.bus_number = 6 (0x6) (int) linux.device_file = '/dev/bus/usb/006/004' (string) info.vendor = 'Logitech, Inc.' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c223_noserial' (string) 105: udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 1423 (0x58f) (int) usb_device.product_id = 37460 (0x9254) (int) usb_device.vendor = 'Alcor Micro Corp.' (string) usb_device.product = 'Hub' (string) usb_device.device_revision_bcd = 786 (0x312) (int) info.subsystem = 'usb_device' (string) info.product = 'Hub' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) usb_device.num_ports = 4 (0x4) (int) usb_device.linux.device_number = 3 (0x3) (int) usb_device.max_power = 100 (0x64) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.is_self_powered = true (bool) usb_device.can_wake_up = true (bool) usb_device.bus_number = 6 (0x6) (int) linux.device_file = '/dev/bus/usb/006/003' (string) info.vendor = 'Alcor Micro Corp.' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial' (string) 106: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usbhid' (string) info.subsystem = 'usb' (string) info.product = 'USB HID Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if1' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1133 (0x46d) (int) usb.product_id = 50458 (0xc51a) (int) usb.vendor = 'Logitech, Inc.' (string) usb.product = 'USB HID Interface' (string) usb.device_revision_bcd = 16640 (0x4100) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 2 (0x2) (int) usb.speed = 12 (double) usb.version = 2 (double) usb.max_power = 98 (0x62) (int) usb.can_wake_up = true (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.interface.number = 1 (0x1) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.protocol = 0 (0x0) (int) usb.configuration = 'RR41.00_B0021' (string) 107: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usbhid' (string) info.subsystem = 'usb' (string) info.product = 'USB HID Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1133 (0x46d) (int) usb.product_id = 50458 (0xc51a) (int) usb.vendor = 'Logitech, Inc.' (string) usb.product = 'USB HID Interface' (string) usb.device_revision_bcd = 16640 (0x4100) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 2 (0x2) (int) usb.speed = 12 (double) usb.version = 2 (double) usb.max_power = 98 (0x62) (int) usb.can_wake_up = true (bool) usb.bus_number = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial' (string) usb.interface.subclass = 1 (0x1) (int) usb.interface.class = 3 (0x3) (int) usb.interface.protocol = 2 (0x2) (int) usb.configuration = 'RR41.00_B0021' (string) 108: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.product_id = 50458 (0xc51a) (int) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.product = 'MX Revolution/G7 Cordless Mouse' (string) usb_device.device_revision_bcd = 16640 (0x4100) (int) info.subsystem = 'usb_device' (string) info.product = 'MX Revolution/G7 Cordless Mouse' (string) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.device_number = 2 (0x2) (int) usb_device.speed = 12 (double) usb_device.version = 2 (double) usb_device.is_self_powered = false (bool) usb_device.can_wake_up = true (bool) usb_device.bus_number = 6 (0x6) (int) linux.device_file = '/dev/bus/usb/006/002' (string) usb_device.max_power = 98 (0x62) (int) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51a_noserial' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) usb_device.configuration = 'RR41.00_B0021' (string) info.vendor = 'Logitech, Inc.' (string) 109: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 1 (0x1) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 6 (0x6) (int) usb.serial = '0000:00:1d.1' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 110: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 1 (0x1) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '1.1 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '1.1 root hub' (string) usb_device.num_ports = 2 (0x2) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 6 (0x6) (int) usb_device.serial = '0000:00:1d.1' (string) linux.device_file = '/dev/bus/usb/006/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2831' (string) info.vendor = 'Linux Foundation' (string) 111: udi = '/org/freedesktop/Hal/devices/pci_8086_2831' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'uhci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2831' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product_id = 10289 (0x2831) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 112: udi = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'wacom' (string) info.subsystem = 'usb' (string) info.product = 'USB HID Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1386 (0x56a) (int) usb.product_id = 185 (0xb9) (int) usb.vendor = 'Wacom Co., Ltd' (string) usb.product = 'USB HID Interface' (string) usb.device_revision_bcd = 260 (0x104) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 2 (0x2) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 300 (0x12c) (int) usb.can_wake_up = false (bool) usb.bus_number = 5 (0x5) (int) usb.is_self_powered = false (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial' (string) usb.interface.subclass = 1 (0x1) (int) usb.interface.class = 3 (0x3) (int) usb.interface.protocol = 2 (0x2) (int) 113: udi = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 1386 (0x56a) (int) usb_device.product_id = 185 (0xb9) (int) usb_device.vendor = 'Wacom Co., Ltd' (string) usb_device.product = 'PTK-640' (string) usb_device.device_revision_bcd = 260 (0x104) (int) info.subsystem = 'usb_device' (string) info.product = 'PTK-640' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.device_number = 2 (0x2) (int) usb_device.max_power = 300 (0x12c) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.is_self_powered = false (bool) usb_device.can_wake_up = false (bool) usb_device.bus_number = 5 (0x5) (int) linux.device_file = '/dev/bus/usb/005/002' (string) info.vendor = 'Wacom Co., Ltd' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_b9_noserial' (string) 114: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 1 (0x1) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 5 (0x5) (int) usb.serial = '0000:00:1d.0' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 115: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 1 (0x1) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '1.1 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '1.1 root hub' (string) usb_device.num_ports = 2 (0x2) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 5 (0x5) (int) usb_device.serial = '0000:00:1d.0' (string) linux.device_file = '/dev/bus/usb/005/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2830' (string) info.vendor = 'Linux Foundation' (string) 116: udi = '/org/freedesktop/Hal/devices/pci_8086_2830' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'uhci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2830' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product_id = 10288 (0x2830) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 117: udi = '/org/freedesktop/Hal/devices/pci_8086_2843' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'pcieport' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2843' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) PCI Express Port 3' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.product_id = 10307 (0x2843) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) PCI Express Port 3' (string) 118: udi = '/org/freedesktop/Hal/devices/pci_8086_4229' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'iwlagn' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_4229' (string) info.subsystem = 'pci' (string) info.product = 'PRO/Wireless 4965 AG or AGN [Kedron] Network Connection' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2841' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0' (string) pci.product_id = 16937 (0x4229) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 4353 (0x1101) (int) pci.subsys_vendor_id = 32902 (0x8086) (int) pci.device_class = 2 (0x2) (int) pci.device_subclass = 128 (0x80) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = 'PRO/Wireless 4965 AG or AGN [Kedron] Network Connection' (string) pci.subsys_vendor = 'Intel Corporation' (string) 119: udi = '/org/freedesktop/Hal/devices/pci_8086_2841' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'pcieport' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2841' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) PCI Express Port 2' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string) pci.product_id = 10305 (0x2841) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) PCI Express Port 2' (string) 120: udi = '/org/freedesktop/Hal/devices/pci_14e4_1693' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'tg3' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_1693' (string) info.subsystem = 'pci' (string) info.product = 'NetLink BCM5787M Gigabit Ethernet PCI Express' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_283f' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' (string) pci.product_id = 5779 (0x1693) (int) pci.vendor_id = 5348 (0x14e4) (int) pci.subsys_product_id = 284 (0x11c) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 2 (0x2) (int) pci.device_subclass = 0 (0x0) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Broadcom Corporation' (string) info.vendor = 'Broadcom Corporation' (string) pci.product = 'NetLink BCM5787M Gigabit Ethernet PCI Express' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 121: udi = '/org/freedesktop/Hal/devices/pci_8086_283f' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'pcieport' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_283f' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) PCI Express Port 1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.product_id = 10303 (0x283f) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) PCI Express Port 1' (string) 122: udi = '/org/freedesktop/Hal/devices/pci_8086_284b' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'HDA Intel' (string) pci.subsys_product = 'Realtek ALC268 audio codec' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) HD Audio Controller' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.product_id = 10315 (0x284b) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 4 (0x4) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) HD Audio Controller' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 123: udi = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial_if1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.subsystem = 'usb' (string) info.product = 'USB Video Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial_if1' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.1' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.device_class = 239 (0xef) (int) usb.device_subclass = 2 (0x2) (int) usb.device_protocol = 1 (0x1) (int) usb.vendor_id = 22918 (0x5986) (int) usb.product_id = 258 (0x102) (int) usb.vendor = 'Acer, Inc' (string) usb.product = 'USB Video Interface' (string) usb.device_revision_bcd = 256 (0x100) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 2 (0x2) (int) usb.speed = 480 (double) usb.version = 2 (double) usb.max_power = 500 (0x1f4) (int) usb.can_wake_up = false (bool) usb.bus_number = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.interface.number = 1 (0x1) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial' (string) usb.interface.subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.protocol = 0 (0x0) (int) 124: udi = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.subsystem = 'usb' (string) info.product = 'USB Video Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.device_class = 239 (0xef) (int) usb.device_subclass = 2 (0x2) (int) usb.device_protocol = 1 (0x1) (int) usb.vendor_id = 22918 (0x5986) (int) usb.product_id = 258 (0x102) (int) usb.vendor = 'Acer, Inc' (string) usb.product = 'USB Video Interface' (string) usb.device_revision_bcd = 256 (0x100) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 2 (0x2) (int) usb.speed = 480 (double) usb.version = 2 (double) usb.max_power = 500 (0x1f4) (int) usb.can_wake_up = false (bool) usb.bus_number = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial' (string) usb.interface.subclass = 1 (0x1) (int) usb.interface.class = 14 (0xe) (int) usb.interface.description = 'Acer Crystal Eye webcam' (string) usb.interface.protocol = 0 (0x0) (int) 125: udi = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.device_class = 239 (0xef) (int) usb_device.device_subclass = 2 (0x2) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.vendor_id = 22918 (0x5986) (int) usb_device.product_id = 258 (0x102) (int) usb_device.vendor = 'Acer, Inc' (string) usb_device.product = 'Crystal Eye Webcam' (string) usb_device.device_revision_bcd = 256 (0x100) (int) info.subsystem = 'usb_device' (string) info.product = 'Crystal Eye Webcam' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.device_number = 2 (0x2) (int) usb_device.max_power = 500 (0x1f4) (int) usb_device.speed = 480 (double) usb_device.version = 2 (double) usb_device.is_self_powered = false (bool) usb_device.can_wake_up = false (bool) usb_device.bus_number = 1 (0x1) (int) linux.device_file = '/dev/bus/usb/001/002' (string) info.vendor = 'Acer, Inc' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5986_102_noserial' (string) 126: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 2 (0x2) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 4 (0x4) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 480 (double) usb.version = 2 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 1 (0x1) (int) usb.serial = '0000:00:1a.7' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 127: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 2 (0x2) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '2.0 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '2.0 root hub' (string) usb_device.num_ports = 4 (0x4) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 480 (double) usb_device.version = 2 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 1 (0x1) (int) usb_device.serial = '0000:00:1a.7' (string) linux.device_file = '/dev/bus/usb/001/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_283a' (string) info.vendor = 'Linux Foundation' (string) 128: udi = '/org/freedesktop/Hal/devices/pci_8086_283a' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'ehci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_283a' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string) pci.product_id = 10298 (0x283a) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 32 (0x20) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 129: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 1 (0x1) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 4 (0x4) (int) usb.serial = '0000:00:1a.1' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 130: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 1 (0x1) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '1.1 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '1.1 root hub' (string) usb_device.num_ports = 2 (0x2) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 4 (0x4) (int) usb_device.serial = '0000:00:1a.1' (string) linux.device_file = '/dev/bus/usb/004/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2835' (string) info.vendor = 'Linux Foundation' (string) 131: udi = '/org/freedesktop/Hal/devices/pci_8086_2835' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'uhci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2835' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string) pci.product_id = 10293 (0x2835) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 132: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'hub' (string) info.subsystem = 'usb' (string) info.product = 'USB Hub Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 7531 (0x1d6b) (int) usb.product_id = 1 (0x1) (int) usb.vendor = 'Linux Foundation' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.max_power = 0 (0x0) (int) usb.can_wake_up = true (bool) usb.bus_number = 3 (0x3) (int) usb.serial = '0000:00:1a.0' (string) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) 133: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.linux.driver = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.product_id = 1 (0x1) (int) usb_device.vendor = 'Linux Foundation' (string) usb_device.product = '1.1 root hub' (string) usb_device.device_revision_bcd = 518 (0x206) (int) info.subsystem = 'usb_device' (string) info.product = '1.1 root hub' (string) usb_device.num_ports = 2 (0x2) (int) usb_device.linux.device_number = 1 (0x1) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.max_power = 0 (0x0) (int) usb_device.can_wake_up = true (bool) usb_device.bus_number = 3 (0x3) (int) usb_device.serial = '0000:00:1a.0' (string) linux.device_file = '/dev/bus/usb/003/001' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2834' (string) info.vendor = 'Linux Foundation' (string) 134: udi = '/org/freedesktop/Hal/devices/pci_8086_2834' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'uhci_hcd' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2834' (string) info.subsystem = 'pci' (string) info.product = '82801H (ICH8 Family) USB UHCI Controller #4' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string) pci.product_id = 10292 (0x2834) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 12 (0xc) (int) pci.device_subclass = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = '82801H (ICH8 Family) USB UHCI Controller #4' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 135: udi = '/org/freedesktop/Hal/devices/pci_10de_427' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'nvidia' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_427' (string) info.subsystem = 'pci' (string) info.product = 'G86 [GeForce 8400M GS]' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a01' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.product_id = 1063 (0x427) (int) pci.vendor_id = 4318 (0x10de) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 3 (0x3) (int) pci.device_subclass = 0 (0x0) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) info.vendor = 'nVidia Corporation' (string) pci.product = 'G86 [GeForce 8400M GS]' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string) 136: udi = '/org/freedesktop/Hal/devices/pci_8086_2a01' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.linux.driver = 'pcieport' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a01' (string) info.subsystem = 'pci' (string) info.product = 'Mobile PM965/GM965/GL960 PCI Express Root Port' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product_id = 10753 (0x2a01) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = 'Mobile PM965/GM965/GL960 PCI Express Root Port' (string) 137: udi = '/org/freedesktop/Hal/devices/pci_8086_2a00' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a00' (string) info.subsystem = 'pci' (string) info.product = 'Mobile PM965/GM965/GL960 Memory Controller Hub' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product_id = 10752 (0x2a00) (int) pci.vendor_id = 32902 (0x8086) (int) pci.subsys_product_id = 287 (0x11f) (int) pci.subsys_vendor_id = 4133 (0x1025) (int) pci.device_class = 6 (0x6) (int) pci.device_subclass = 0 (0x0) (int) pci.device_protocol = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) info.vendor = 'Intel Corporation' (string) pci.product = 'Mobile PM965/GM965/GL960 Memory Controller Hub' (string) pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)