dmesg boot messages (2.6.31-gentoo-r10, no radeonfb)

dmesg.txt (text/plain), 56.21 KB, created by Andreas K. Hüttel on 2010-04-22 10:27:21 UTC

[    0.000000] Linux version 2.6.31-gentoo-r10 (root@grenadine) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Apr 22 10:52:16 CEST 2010
[    0.000000] Command line: root=/dev/sda1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfdff800 (usable)
[    0.000000]  BIOS-e820: 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfe55c00 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
[    0.000000] DMI 2.5 present.
[    0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 000000000 write-back
[    0.000000]   1 base 0CFF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcfdff max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfdff000
[    0.000000]  0000000000 - 00cfc00000 page 2M
[    0.000000]  00cfc00000 - 00cfdff000 page 4k
[    0.000000] kernel direct mapping tables up to cfdff000 @ 8000-e000
[    0.000000] init_memory_mapping: 0000000100000000-0000000128000000
[    0.000000]  0100000000 - 0128000000 page 2M
[    0.000000] kernel direct mapping tables up to 128000000 @ c000-12000
[    0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000000fc5b3 00084 (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: FACP 00000000000fc6e3 000F4 (v03 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: DSDT 00000000fff76bf6 04596 (v01   DELL    dt_ex 00001000 INTL 20050624)
[    0.000000] ACPI: FACS 00000000cfdff800 00040
[    0.000000] ACPI: SSDT 00000000fff7b2ab 000AA (v01   DELL    st_ex 00001000 INTL 20050624)
[    0.000000] ACPI: APIC 00000000000fc7d7 00092 (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: BOOT 00000000000fc869 00028 (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: ASF! 00000000000fc891 00096 (v32 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: MCFG 00000000000fc927 0003E (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: HPET 00000000000fc965 00038 (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: TCPA 00000000000fcbc1 00032 (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: ____ 00000000000fcbf3 00030 (v01 DELL    B9K     00000015 ASL  00000061)
[    0.000000] ACPI: SSDT 00000000cfdff840 001F9 (v01 DpgPmm  Cpu0Ist 00000011 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000cfdffc49 001F9 (v01 DpgPmm  Cpu1Ist 00000011 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000cfe00052 00140 (v01 DpgPmm    CpuPm 00000010 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 000164d648]    TEXT DATA BSS ==> [0001000000 - 000164d648]
[    0.000000]   #3 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #4 [000164e000 - 000164e1a0]              BRK ==> [000164e000 - 000164e1a0]
[    0.000000]   #5 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
[    0.000000]   #6 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
[    0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00128000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cfdff
[    0.000000]     0: 0x00100000 -> 0x00128000
[    0.000000] On node 0 totalpages: 1015197
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 105 pages reserved
[    0.000000]   DMA zone: 3837 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833079 pages, LIFO batch:31
[    0.000000]   Normal zone: 2240 pages used for memmap
[    0.000000]   Normal zone: 161600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] 8 Processors exceeds NR_CPUS limit of 4
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfdff000 - 00000000cfe00000
[    0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cfe53000
[    0.000000] PM: Registered nosave memory: 00000000cfe53000 - 00000000cfe54000
[    0.000000] PM: Registered nosave memory: 00000000cfe54000 - 00000000cfe55000
[    0.000000] PM: Registered nosave memory: 00000000cfe55000 - 00000000cfe56000
[    0.000000] PM: Registered nosave memory: 00000000cfe56000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
[    0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
[    0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[    0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages at ffff880028022000, static data 75872 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 998516
[    0.000000] Kernel command line: root=/dev/sda1
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.000000] Memory: 3923256k/4849664k available (3633k kernel code, 788876k absent, 136552k reserved, 2018k data, 416k init)
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] NR_IRQS:384
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2992.217 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] hpet clockevent registered
[    0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.43 BogoMIPS (lpj=2992217)
[    0.000999] Mount-cache hash table entries: 256
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 6144K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 0
[    0.001006] mce: CPU supports 6 MCE banks
[    0.001119] CPU0: Thermal monitoring enabled (TM2)
[    0.001229] using mwait in idle threads.
[    0.001337] Performance Counters: Core2 events, Intel PMU driver.
[    0.001522] ... version:                 2
[    0.001631] ... bit width:               40
[    0.001739] ... generic counters:        2
[    0.001848] ... value mask:              000000ffffffffff
[    0.002001] ... max period:              000000007fffffff
[    0.002110] ... fixed-purpose counters:  3
[    0.002219] ... counter mask:            0000000700000003
[    0.002343] ACPI: Core revision 20090521
[    0.203663] Setting APIC routing to flat
[    0.203968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.214186] CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
[    0.214967] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 5984.08 BogoMIPS (lpj=2992044)
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 6144K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] mce: CPU supports 6 MCE banks
[    0.000999] CPU1: Thermal monitoring enabled (TM2)
[    0.285660] CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
[    0.286104] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.286981] Brought up 2 CPUs
[    0.287958] Total of 2 processors activated (11968.52 BogoMIPS).
[    0.288128] Time: 12:17:50  Date: 04/22/10
[    0.288128] NET: Registered protocol family 16
[    0.288244] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.288957] ACPI: bus type pci registered
[    0.289071] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.289084] PCI: MCFG area at e0000000 reserved in E820
[    0.291922] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.291956] PCI: Using configuration type 1 for base access
[    0.293975] bio: create slab <bio-0> at 0
[    0.295194] ACPI: EC: Look up EC in DSDT
[    0.372202] ACPI: Interpreter enabled
[    0.372307] ACPI: (supports S0 S1 S3 S4 S5)
[    0.372597] ACPI: Using IOAPIC for interrupt routing
[    0.472334] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 87 20090521 tbutils-246
[    0.477380] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.485260] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.485381] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.485381] pci 0000:00:01.0: PME# disabled
[    0.486019] pci 0000:00:03.0: reg 10 64bit mmio: [0xfedad000-0xfedad00f]
[    0.486037] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.486142] pci 0000:00:03.0: PME# disabled
[    0.486262] pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87]
[    0.486265] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93]
[    0.486268] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7]
[    0.486271] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3]
[    0.486274] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff]
[    0.486302] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f]
[    0.486305] pci 0000:00:03.3: reg 14 32bit mmio: [0xfebda000-0xfebdafff]
[    0.486368] pci 0000:00:19.0: reg 10 32bit mmio: [0xfebe0000-0xfebfffff]
[    0.486372] pci 0000:00:19.0: reg 14 32bit mmio: [0xfebdb000-0xfebdbfff]
[    0.486377] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf]
[    0.486406] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.486512] pci 0000:00:19.0: PME# disabled
[    0.487037] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
[    0.487090] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
[    0.487147] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebd9c00-0xfebd9fff]
[    0.487190] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.487296] pci 0000:00:1a.7: PME# disabled
[    0.487429] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebdc000-0xfebdffff]
[    0.487461] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.487567] pci 0000:00:1b.0: PME# disabled
[    0.487711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.487817] pci 0000:00:1c.0: PME# disabled
[    0.488013] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[    0.488066] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[    0.488118] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[    0.488174] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
[    0.488217] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.488324] pci 0000:00:1d.7: PME# disabled
[    0.488521] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.488695] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[    0.488802] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    0.488976] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[    0.489049] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[    0.489053] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[    0.489057] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[    0.489061] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[    0.489066] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf]
[    0.489070] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff]
[    0.489093] pci 0000:00:1f.2: PME# supported from D3hot
[    0.489199] pci 0000:00:1f.2: PME# disabled
[    0.489322] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebd9b00-0xfebd9bff]
[    0.489333] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
[    0.489368] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[    0.489374] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff]
[    0.489378] pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
[    0.489385] pci 0000:01:00.0: reg 30 32bit mmio: [0xfea00000-0xfea1ffff]
[    0.489399] pci 0000:01:00.0: supports D1 D2
[    0.489429] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.489431] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
[    0.489434] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.489465] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.489505] pci 0000:00:1e.0: transparent bridge
[    0.489623] pci_bus 0000:00: on NUMA node 0
[    0.489626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.490274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[    0.490652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[    0.490980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    1.657574] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    1.659045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    1.660303] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    1.661565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    1.662749] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    1.664225] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    1.665488] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    1.666750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    1.667424] SCSI subsystem initialized
[    1.667424] libata version 3.00 loaded.
[    1.667424] usbcore: registered new interface driver usbfs
[    1.667424] usbcore: registered new interface driver hub
[    1.668011] usbcore: registered new device driver usb
[    1.668121] PCI: Using ACPI for IRQ routing
[    1.673028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.673316] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.677004] Switched to high resolution mode on CPU 0
[    1.677993] Switched to high resolution mode on CPU 1
[    1.681006] pnp: PnP ACPI init
[    1.681118] ACPI: bus type pnp registered
[    1.692804] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[    1.692978] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[    1.732811] pnp: PnP ACPI: found 10 devices
[    1.732916] ACPI: ACPI bus type pnp unregistered
[    1.733027] system 00:01: ioport range 0xc00-0xc7f has been reserved
[    1.737706] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.737812] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    1.737917] pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
[    1.738025] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    1.738199] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    1.738304] pci 0000:00:1c.0:   IO window: disabled
[    1.738410] pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
[    1.738516] pci 0000:00:1c.0:   PREFETCH window: disabled
[    1.738622] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    1.738726] pci 0000:00:1e.0:   IO window: disabled
[    1.738832] pci 0000:00:1e.0:   MEM window: disabled
[    1.738938] pci 0000:00:1e.0:   PREFETCH window: disabled
[    1.739050] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.739157] pci 0000:00:01.0: setting latency timer to 64
[    1.739161] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.739268] pci 0000:00:1c.0: setting latency timer to 64
[    1.739272] pci 0000:00:1e.0: setting latency timer to 64
[    1.739275] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.739276] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.739278] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    1.739280] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
[    1.739281] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    1.739283] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[    1.739285] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    1.739286] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[    1.739301] NET: Registered protocol family 2
[    1.739451] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.739866] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.741065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.741513] TCP: Hash tables configured (established 262144 bind 65536)
[    1.741619] TCP reno registered
[    1.741785] NET: Registered protocol family 1
[    1.742018] Simple Boot Flag at 0x7a set to 0x1
[    1.742734] audit: initializing netlink socket (disabled)
[    1.742843] type=2000 audit(1271938670.742:1): initialized
[    1.743230] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.745256] msgmni has been set to 7664
[    1.745911] alg: No test for stdrng (krng)
[    1.746023] io scheduler noop registered
[    1.746127] io scheduler anticipatory registered
[    1.746234] io scheduler deadline registered
[    1.746346] io scheduler cfq registered (default)
[    1.746468] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
[    1.746470] pci 0000:00:1a.0: Performing full reset
[    1.746484] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
[    1.746485] pci 0000:00:1a.1: Performing full reset
[    1.746513] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
[    1.746514] pci 0000:00:1d.0: Performing full reset
[    1.746528] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
[    1.746529] pci 0000:00:1d.1: Performing full reset
[    1.746543] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
[    1.746544] pci 0000:00:1d.2: Performing full reset
[    1.746568] pci 0000:01:00.0: Boot video device
[    1.746655] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    1.746659] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.746754] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    1.746760] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.748847] Non-volatile memory driver v1.3
[    1.749020] Linux agpgart interface v0.103
[    1.749344] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.749520] ACPI: Power Button [PWRF]
[    1.749673] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.749851] ACPI: Power Button [VBTN]
[    1.750080] processor LNXCPU:00: registered as cooling_device0
[    1.750247] processor LNXCPU:01: registered as cooling_device1
[    1.835234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.079127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.323124] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.323487] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.323716] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.323883] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.324030] 0000:00:03.3: ttyS2 at I/O 0xec98 (irq = 17) is a 16550A
[    2.325079] brd: module loaded
[    2.325214] Loading iSCSI transport class v2.0-870.
[    2.325489] ahci 0000:00:1f.2: version 3.0
[    2.325497] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.325620] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[    2.325673] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
[    2.325847] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems 
[    2.326032] ahci 0000:00:1f.2: setting latency timer to 64
[    2.334034] scsi0 : ahci
[    2.334226] scsi1 : ahci
[    2.334385] scsi2 : ahci
[    2.334543] scsi3 : ahci
[    2.334700] scsi4 : ahci
[    2.334860] scsi5 : ahci
[    2.336390] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 26
[    2.336564] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 26
[    2.336738] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 26
[    2.336911] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 26
[    2.337086] ata5: DUMMY
[    2.337190] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 26
[    2.337481] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    2.337585] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    2.337707] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.337814] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[    2.337988] e1000e 0000:00:19.0: setting latency timer to 64
[    2.338043] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[    2.547070] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:ae:61:47:6f
[    2.547243] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.547369] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1041ff-0ff
[    2.547511] usbmon: debugfs is not available
[    2.547616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.547721] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[    2.547733] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    2.547842] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.547845] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.547958] drivers/usb/core/inode.c: creating file 'devices'
[    2.547961] drivers/usb/core/inode.c: creating file '001'
[    2.547964] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.548144] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[    2.548147] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[    2.548166] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[    2.552045] ehci_hcd 0000:00:1a.7: debug port 1
[    2.552155] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.552156] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[    2.552165] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebd9c00
[    2.552271] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    2.556161] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    2.562005] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.562128] usb usb1: default language 0x0409
[    2.562135] usb usb1: udev 1, busnum 1, minor = 0
[    2.562137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.562250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.562423] usb usb1: Product: EHCI Host Controller
[    2.562527] usb usb1: Manufacturer: Linux 2.6.31-gentoo-r10 ehci_hcd
[    2.562632] usb usb1: SerialNumber: 0000:00:1a.7
[    2.562761] usb usb1: uevent
[    2.562783] usb usb1: usb_probe_device
[    2.562785] usb usb1: configuration #1 chosen from 1 choice
[    2.562893] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    2.562903] usb 1-0:1.0: uevent
[    2.562923] hub 1-0:1.0: usb_probe_interface
[    2.562925] hub 1-0:1.0: usb_probe_interface - got id
[    2.562926] hub 1-0:1.0: USB hub found
[    2.563036] hub 1-0:1.0: 6 ports detected
[    2.563140] hub 1-0:1.0: standalone hub
[    2.563141] hub 1-0:1.0: no power switching (usb 1.0)
[    2.563142] hub 1-0:1.0: individual port over-current protection
[    2.563143] hub 1-0:1.0: power on to power good time: 20ms
[    2.563146] hub 1-0:1.0: local power source is good
[    2.563148] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    2.563168] drivers/usb/core/inode.c: creating file '001'
[    2.563188] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.563298] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.563300] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.563406] drivers/usb/core/inode.c: creating file '002'
[    2.563409] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.563585] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[    2.563588] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[    2.563602] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[    2.567487] ehci_hcd 0000:00:1d.7: debug port 1
[    2.567594] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.567595] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    2.567603] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[    2.567710] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    2.571602] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    2.577006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.577129] usb usb2: default language 0x0409
[    2.577136] usb usb2: udev 1, busnum 2, minor = 128
[    2.577138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.577251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.577423] usb usb2: Product: EHCI Host Controller
[    2.577527] usb usb2: Manufacturer: Linux 2.6.31-gentoo-r10 ehci_hcd
[    2.577632] usb usb2: SerialNumber: 0000:00:1d.7
[    2.577758] usb usb2: uevent
[    2.577778] usb usb2: usb_probe_device
[    2.577779] usb usb2: configuration #1 chosen from 1 choice
[    2.577887] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    2.577896] usb 2-0:1.0: uevent
[    2.577915] hub 2-0:1.0: usb_probe_interface
[    2.577916] hub 2-0:1.0: usb_probe_interface - got id
[    2.577918] hub 2-0:1.0: USB hub found
[    2.578026] hub 2-0:1.0: 6 ports detected
[    2.578130] hub 2-0:1.0: standalone hub
[    2.578131] hub 2-0:1.0: no power switching (usb 1.0)
[    2.578132] hub 2-0:1.0: individual port over-current protection
[    2.578133] hub 2-0:1.0: power on to power good time: 20ms
[    2.578136] hub 2-0:1.0: local power source is good
[    2.578137] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    2.578157] drivers/usb/core/inode.c: creating file '001'
[    2.578188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.578293] ohci_hcd: block sizes: ed 80 td 96
[    2.578314] uhci_hcd: USB Universal Host Controller Interface driver
[    2.578458] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.578566] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.578568] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.578675] drivers/usb/core/inode.c: creating file '003'
[    2.578677] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.578854] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.578959] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[    2.578961] uhci_hcd 0000:00:1a.0: Performing full reset
[    2.578972] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[    2.578980] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    2.579106] usb usb3: default language 0x0409
[    2.579110] usb usb3: udev 1, busnum 3, minor = 256
[    2.579112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.579217] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.579390] usb usb3: Product: UHCI Host Controller
[    2.579494] usb usb3: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
[    2.579599] usb usb3: SerialNumber: 0000:00:1a.0
[    2.579728] usb usb3: uevent
[    2.579746] usb usb3: usb_probe_device
[    2.579748] usb usb3: configuration #1 chosen from 1 choice
[    2.581637] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    2.581647] usb 3-0:1.0: uevent
[    2.581665] hub 3-0:1.0: usb_probe_interface
[    2.581666] hub 3-0:1.0: usb_probe_interface - got id
[    2.581668] hub 3-0:1.0: USB hub found
[    2.581775] hub 3-0:1.0: 2 ports detected
[    2.581878] hub 3-0:1.0: standalone hub
[    2.581879] hub 3-0:1.0: no power switching (usb 1.0)
[    2.581880] hub 3-0:1.0: individual port over-current protection
[    2.581882] hub 3-0:1.0: power on to power good time: 2ms
[    2.581884] hub 3-0:1.0: local power source is good
[    2.581885] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    2.581897] drivers/usb/core/inode.c: creating file '001'
[    2.581920] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.582030] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.582032] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.582139] drivers/usb/core/inode.c: creating file '004'
[    2.582142] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.582318] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.582424] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[    2.582425] uhci_hcd 0000:00:1a.1: Performing full reset
[    2.582436] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[    2.582445] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    2.582568] usb usb4: default language 0x0409
[    2.582573] usb usb4: udev 1, busnum 4, minor = 384
[    2.582574] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.582679] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.582852] usb usb4: Product: UHCI Host Controller
[    2.582957] usb usb4: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
[    2.583064] usb usb4: SerialNumber: 0000:00:1a.1
[    2.583190] usb usb4: uevent
[    2.583208] usb usb4: usb_probe_device
[    2.583210] usb usb4: configuration #1 chosen from 1 choice
[    2.583317] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    2.583326] usb 4-0:1.0: uevent
[    2.583344] hub 4-0:1.0: usb_probe_interface
[    2.583345] hub 4-0:1.0: usb_probe_interface - got id
[    2.583347] hub 4-0:1.0: USB hub found
[    2.583453] hub 4-0:1.0: 2 ports detected
[    2.583557] hub 4-0:1.0: standalone hub
[    2.583558] hub 4-0:1.0: no power switching (usb 1.0)
[    2.583559] hub 4-0:1.0: individual port over-current protection
[    2.583560] hub 4-0:1.0: power on to power good time: 2ms
[    2.583562] hub 4-0:1.0: local power source is good
[    2.583564] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    2.583573] drivers/usb/core/inode.c: creating file '001'
[    2.583595] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.583703] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.583705] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.583811] drivers/usb/core/inode.c: creating file '005'
[    2.583814] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.583990] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.584098] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    2.584099] uhci_hcd 0000:00:1d.0: Performing full reset
[    2.584111] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    2.584114] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    2.584236] usb usb5: default language 0x0409
[    2.584240] usb usb5: udev 1, busnum 5, minor = 512
[    2.584241] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.584347] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.584520] usb usb5: Product: UHCI Host Controller
[    2.584624] usb usb5: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
[    2.584729] usb usb5: SerialNumber: 0000:00:1d.0
[    2.584853] usb usb5: uevent
[    2.584872] usb usb5: usb_probe_device
[    2.584873] usb usb5: configuration #1 chosen from 1 choice
[    2.584980] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    2.584991] usb 5-0:1.0: uevent
[    2.585009] hub 5-0:1.0: usb_probe_interface
[    2.585011] hub 5-0:1.0: usb_probe_interface - got id
[    2.585012] hub 5-0:1.0: USB hub found
[    2.585119] hub 5-0:1.0: 2 ports detected
[    2.585223] hub 5-0:1.0: standalone hub
[    2.585224] hub 5-0:1.0: no power switching (usb 1.0)
[    2.585225] hub 5-0:1.0: individual port over-current protection
[    2.585227] hub 5-0:1.0: power on to power good time: 2ms
[    2.585229] hub 5-0:1.0: local power source is good
[    2.585230] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    2.585240] drivers/usb/core/inode.c: creating file '001'
[    2.585260] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.585368] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.585370] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.585476] drivers/usb/core/inode.c: creating file '006'
[    2.585478] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.585655] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.585762] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    2.585763] uhci_hcd 0000:00:1d.1: Performing full reset
[    2.585774] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    2.585777] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    2.585900] usb usb6: default language 0x0409
[    2.585904] usb usb6: udev 1, busnum 6, minor = 640
[    2.585906] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.586014] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.586188] usb usb6: Product: UHCI Host Controller
[    2.586292] usb usb6: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
[    2.586397] usb usb6: SerialNumber: 0000:00:1d.1
[    2.586523] usb usb6: uevent
[    2.586542] usb usb6: usb_probe_device
[    2.586543] usb usb6: configuration #1 chosen from 1 choice
[    2.586651] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[    2.586660] usb 6-0:1.0: uevent
[    2.586678] hub 6-0:1.0: usb_probe_interface
[    2.586679] hub 6-0:1.0: usb_probe_interface - got id
[    2.586680] hub 6-0:1.0: USB hub found
[    2.586788] hub 6-0:1.0: 2 ports detected
[    2.586891] hub 6-0:1.0: standalone hub
[    2.586892] hub 6-0:1.0: no power switching (usb 1.0)
[    2.586893] hub 6-0:1.0: individual port over-current protection
[    2.586895] hub 6-0:1.0: power on to power good time: 2ms
[    2.586897] hub 6-0:1.0: local power source is good
[    2.586898] hub 6-0:1.0: trying to enable port power on non-switchable hub
[    2.586912] drivers/usb/core/inode.c: creating file '001'
[    2.586932] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.587042] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.587044] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.587151] drivers/usb/core/inode.c: creating file '007'
[    2.587153] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.587330] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.587435] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    2.587437] uhci_hcd 0000:00:1d.2: Performing full reset
[    2.587448] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    2.587456] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    2.587579] usb usb7: default language 0x0409
[    2.587583] usb usb7: udev 1, busnum 7, minor = 768
[    2.587584] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.587690] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.587863] usb usb7: Product: UHCI Host Controller
[    2.587967] usb usb7: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
[    2.588074] usb usb7: SerialNumber: 0000:00:1d.2
[    2.588202] usb usb7: uevent
[    2.588220] usb usb7: usb_probe_device
[    2.588222] usb usb7: configuration #1 chosen from 1 choice
[    2.588329] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[    2.588338] usb 7-0:1.0: uevent
[    2.588357] hub 7-0:1.0: usb_probe_interface
[    2.588358] hub 7-0:1.0: usb_probe_interface - got id
[    2.588359] hub 7-0:1.0: USB hub found
[    2.588466] hub 7-0:1.0: 2 ports detected
[    2.588569] hub 7-0:1.0: standalone hub
[    2.588570] hub 7-0:1.0: no power switching (usb 1.0)
[    2.588571] hub 7-0:1.0: individual port over-current protection
[    2.588573] hub 7-0:1.0: power on to power good time: 2ms
[    2.588575] hub 7-0:1.0: local power source is good
[    2.588576] hub 7-0:1.0: trying to enable port power on non-switchable hub
[    2.588586] drivers/usb/core/inode.c: creating file '001'
[    2.588622] Initializing USB Mass Storage driver...
[    2.588760] usbcore: registered new interface driver usb-storage
[    2.588865] USB Mass Storage support registered.
[    2.589003] usbcore: registered new interface driver libusual
[    2.589187] PNP: No PS/2 controller found. Probing ports directly.
[    2.591823] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.591930] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.592074] mice: PS/2 mouse device common for all mice
[    2.592304] rtc_cmos 00:05: RTC can wake from S4
[    2.592442] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.592566] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[    2.592686] i2c /dev entries driver
[    2.592831] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.593209] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [e-mail]
[    2.593464] cpuidle: using governor ladder
[    2.593568] cpuidle: using governor menu
[    2.593673] No iBFT detected.
[    2.593835] Advanced Linux Sound Architecture Driver Version 1.0.20.
[    2.594105] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.594289] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    2.642020] ata6: SATA link down (SStatus 4 SControl 300)
[    2.642155] ata3: SATA link down (SStatus 4 SControl 300)
[    2.663011] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
[    2.663015] hub 1-0:1.0: port 2: status 0501 change 0001
[    2.663024] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
[    2.663027] hub 1-0:1.0: port 4: status 0501 change 0001
[    2.678019] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[    2.678022] hub 2-0:1.0: port 6: status 0501 change 0001
[    2.681011] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00
[    2.683011] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
[    2.685016] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    2.686013] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    2.688010] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
[    2.763008] hub 1-0:1.0: state 7 ports 6 chg 0014 evt 0000
[    2.763014] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[    2.795137] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.795256] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.795375] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.795662] ata4.00: ATA-8: WDC WD10EADS-65M2B0, 01.00A01, max UDMA/133
[    2.795775] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.795961] ata1.00: ATA-8: ST3250310AS, 4.ADA, max UDMA/133
[    2.796070] ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.796265] ata4.00: configured for UDMA/133
[    2.796620] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH30N, A102, max UDMA/100
[    2.796934] ata1.00: configured for UDMA/133
[    2.798202] ata2.00: configured for UDMA/100
[    2.808208] scsi 0:0:0:0: Direct-Access     ATA      ST3250310AS      4.AD PQ: 0 ANSI: 5
[    2.808541] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[    2.808554] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.808842] sd 0:0:0:0: [sda] Write Protect is off
[    2.808947] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.808960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.809199]  sda:
[    2.811236] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH30N    A102 PQ: 0 ANSI: 5
[    2.814430] ehci_hcd 0000:00:1a.7: port 2 high speed
[    2.814433] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[    2.814748] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.814933] Uniform CD-ROM driver Revision: 3.20
[    2.815103] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.815152] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.815303] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EADS-65M 01.0 PQ: 0 ANSI: 5
[    2.815569] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.815764] sd 3:0:0:0: [sdb] Write Protect is off
[    2.815869] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.815882] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.816122]  sdb:
[    2.816262] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.819785]  sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.840583] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.865133] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    2.916301] ehci_hcd 0000:00:1a.7: port 2 high speed
[    2.916304] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[    2.975922] ALSA device list:
[    2.976027]   #0: HDA Intel at 0xfebdc000 irq 16
[    2.976133] Netfilter messages via NETLINK v0.30.
[    2.976250] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.976506] ctnetlink v0.93: registering with nfnetlink.
[    2.976961] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.977081] TCP cubic registered
[    2.977187] NET: Registered protocol family 17
[    2.977623] PM: Resume from disk failed.
[    2.977699]   Magic number: 6:631:279
[    2.977814] tty tty16: hash matches
[    2.979434] usb 1-2: udev 2, busnum 1, minor = 1
[    2.979437] usb 1-2: New USB device found, idVendor=0424, idProduct=2504
[    2.979547] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.979682] usb 1-2: uevent
[    2.979702] usb 1-2: usb_probe_device
[    2.979703] usb 1-2: configuration #1 chosen from 1 choice
[    2.979934] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[    2.979952] usb 1-2:1.0: uevent
[    2.979980] hub 1-2:1.0: usb_probe_interface
[    2.979982] hub 1-2:1.0: usb_probe_interface - got id
[    2.979984] hub 1-2:1.0: USB hub found
[    2.980186] hub 1-2:1.0: 4 ports detected
[    2.980291] hub 1-2:1.0: standalone hub
[    2.980292] hub 1-2:1.0: individual port power switching
[    2.980293] hub 1-2:1.0: individual port over-current protection
[    2.980442] hub 1-2:1.0: TT per port
[    2.980445] hub 1-2:1.0: TT requires at most 8 FS bit times (666 ns)
[    2.980447] hub 1-2:1.0: power on to power good time: 100ms
[    2.980682] hub 1-2:1.0: local power source is good
[    2.980684] hub 1-2:1.0: enabling power on all ports
[    2.981184] drivers/usb/core/inode.c: creating file '002'
[    2.981207] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[    2.981213] ehci_hcd 0000:00:1a.7: port 4 low speed --> companion
[    3.032012] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC
[    3.032026] hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000
[    3.032030] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[    3.032035] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion
[    3.081432] usb 1-2: link qh256-0001/ffff8800cf800180 start 1 [1/0 us]
[    3.083008] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[    3.083021] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    3.083025] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    3.083027] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    3.083031] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
[    3.083035] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040
[    3.083040] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0000
[    3.204054] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    3.204060] uhci_hcd 0000:00:1a.1: port 2 portsc 01a3,00
[    3.204065] hub 4-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[    3.308011] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[    3.311817]  sdb1 sdb2 sdb3
[    3.312221] sd 3:0:0:0: [sdb] Attached SCSI disk
[    3.346580] kjournald starting.  Commit interval 5 seconds
[    3.346693] EXT3-fs: mounted filesystem with writeback data mode.
[    3.346810] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[    3.346931] Freeing unused kernel memory: 416k freed
[    3.410009] usb 4-2: new low speed USB device using uhci_hcd and address 2
[    3.551549] usb 4-2: skipped 1 descriptor after interface
[    3.556547] usb 4-2: default language 0x0409
[    3.565548] usb 4-2: udev 2, busnum 4, minor = 385
[    3.565550] usb 4-2: New USB device found, idVendor=0461, idProduct=4d22
[    3.565660] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.565773] usb 4-2: Product: USB Optical Mouse
[    3.565902] usb 4-2: uevent
[    3.565926] usb 4-2: usb_probe_device
[    3.565928] usb 4-2: configuration #1 chosen from 1 choice
[    3.568546] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[    3.568561] usb 4-2:1.0: uevent
[    3.568603] drivers/usb/core/inode.c: creating file '002'
[    3.568621] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    3.568627] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00
[    3.568633] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[    3.672010] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[    3.704009] usb usb5: suspend_rh (auto-stop)
[    3.704027] usb usb6: suspend_rh (auto-stop)
[    3.704045] usb usb3: suspend_rh (auto-stop)
[    3.774131] usb 7-2: new low speed USB device using uhci_hcd and address 2
[    3.915547] usb 7-2: skipped 1 descriptor after interface
[    3.920545] usb 7-2: default language 0x0409
[    3.935545] usb 7-2: udev 2, busnum 7, minor = 769
[    3.935548] usb 7-2: New USB device found, idVendor=413c, idProduct=2003
[    3.935657] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.935770] usb 7-2: Product: Dell USB Keyboard
[    3.935874] usb 7-2: Manufacturer: Dell
[    3.936007] usb 7-2: uevent
[    3.936028] usb 7-2: usb_probe_device
[    3.936030] usb 7-2: configuration #1 chosen from 1 choice
[    3.938548] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
[    3.938566] usb 7-2:1.0: uevent
[    3.938610] drivers/usb/core/inode.c: creating file '002'
[    3.938625] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    4.701009] hub 5-0:1.0: hub_suspend
[    4.701015] usb usb5: bus auto-suspend
[    4.701017] usb usb5: suspend_rh
[    4.701031] hub 6-0:1.0: hub_suspend
[    4.701034] usb usb6: bus auto-suspend
[    4.701036] usb usb6: suspend_rh
[    5.324784] udev: starting version 149
[    5.331759] usb usb3: uevent
[    5.331770] usb 3-0:1.0: uevent
[    5.331792] usb usb4: uevent
[    5.331804] usb 4-0:1.0: uevent
[    5.331817] usb 4-2: uevent
[    5.331828] usb 4-2:1.0: uevent
[    5.331851] usb usb1: uevent
[    5.331862] usb 1-0:1.0: uevent
[    5.331874] usb 1-2: uevent
[    5.331885] usb 1-2:1.0: uevent
[    5.332037] usb usb5: uevent
[    5.332047] usb 5-0:1.0: uevent
[    5.332070] usb usb6: uevent
[    5.332080] usb 6-0:1.0: uevent
[    5.332102] usb usb7: uevent
[    5.332112] usb 7-0:1.0: uevent
[    5.332126] usb 7-2: uevent
[    5.332136] usb 7-2:1.0: uevent
[    5.332158] usb usb2: uevent
[    5.332169] usb 2-0:1.0: uevent
[    5.382396] usb usb2: uevent
[    5.382755] usb usb6: uevent
[    5.383108] usb usb5: uevent
[    5.383467] usb usb3: uevent
[    5.383615] usb usb4: uevent
[    5.384110] usb usb1: uevent
[    5.384614] usb usb7: uevent
[    5.385347] usb 4-2: uevent
[    5.385481] usb 1-2: uevent
[    5.385896] usb 7-2: uevent
[    5.701137] hub 3-0:1.0: hub_suspend
[    5.701144] usb usb3: bus auto-suspend
[    5.701146] usb usb3: suspend_rh
[    5.701161] hub 2-0:1.0: hub_suspend
[    5.701164] usb usb2: bus auto-suspend
[    5.701166] ehci_hcd 0000:00:1d.7: suspend root hub
[    5.701189] hub 1-2:1.0: hub_suspend
[    5.701193] usb 1-2: unlink qh256-0001/ffff8800cf800180 start 1 [1/0 us]
[    5.701361] usb 1-2: usb auto-suspend
[    5.863735] usbcore: registered new interface driver hiddev
[    5.863745] usbhid 4-2:1.0: usb_probe_interface
[    5.863747] usbhid 4-2:1.0: usb_probe_interface - got id
[    5.876671] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2
[    5.876731] generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[    5.876736] usbhid 7-2:1.0: usb_probe_interface
[    5.876738] usbhid 7-2:1.0: usb_probe_interface - got id
[    5.891706] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input3
[    5.891713] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 16, phase 8, 118 us
[    5.891743] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2/input0
[    5.891751] usbcore: registered new interface driver usbhid
[    5.891753] usbhid: v2.6:USB HID core driver
[    5.893655] usb 4-2:1.0: uevent
[    5.894144] usb 4-2:1.0: uevent
[    5.894196] usb 4-2: uevent
[    5.894334] usb 4-2: uevent
[    5.894795] usb 4-2:1.0: uevent
[    5.894917] usb 4-2:1.0: uevent
[    5.895355] usb 7-2:1.0: uevent
[    5.895409] usb 7-2: uevent
[    5.895988] usb 7-2:1.0: uevent
[    6.833461] EXT3 FS on sda1, internal journal
[    8.704045] hub 1-0:1.0: hub_suspend
[    8.704052] usb usb1: bus auto-suspend
[    8.704054] ehci_hcd 0000:00:1a.7: suspend root hub
[   17.385189] kjournald starting.  Commit interval 5 seconds
[   17.385393] EXT3 FS on sdb2, internal journal
[   17.385397] EXT3-fs: mounted filesystem with writeback data mode.
[   17.420125] kjournald starting.  Commit interval 5 seconds
[   17.420378] EXT3 FS on sdb3, internal journal
[   17.420381] EXT3-fs: mounted filesystem with writeback data mode.
[   17.436086] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[   17.436095] REISERFS (device sda3): using ordered data mode
[   17.443388] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   17.443684] REISERFS (device sda3): checking transaction log (sda3)
[   17.463078] REISERFS (device sda3): Using r5 hash to sort names
[   17.559042] kjournald starting.  Commit interval 5 seconds
[   17.559317] EXT3 FS on dm-0, internal journal
[   17.559321] EXT3-fs: mounted filesystem with writeback data mode.
[   17.621872] Adding 8008392k swap on /dev/sda2.  Priority:-1 extents:1 across:8008392k 
[   17.635841] Adding 8393920k swap on /dev/sdb1.  Priority:-2 extents:1 across:8393920k 
[   23.296148] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[   23.347034] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[   24.803860] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   24.803862] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   40.347285] usb usb3: uevent
[   40.347340] usb 3-0:1.0: uevent
[   40.347401] usb usb4: uevent
[   40.347451] usb 4-0:1.0: uevent
[   40.347485] usb 4-2: uevent
[   40.347535] usb 4-2:1.0: uevent
[   40.347799] usb usb1: uevent
[   40.347850] usb 1-0:1.0: uevent
[   40.347884] usb 1-2: uevent
[   40.347935] usb 1-2:1.0: uevent
[   40.348459] usb usb5: uevent
[   40.348510] usb 5-0:1.0: uevent
[   40.348572] usb usb6: uevent
[   40.348622] usb 6-0:1.0: uevent
[   40.348682] usb usb7: uevent
[   40.348731] usb 7-0:1.0: uevent
[   40.348767] usb 7-2: uevent
[   40.348816] usb 7-2:1.0: uevent
[   40.349034] usb usb2: uevent
[   40.349087] usb 2-0:1.0: uevent
[   46.714727] coretemp coretemp.0: Using relative temperature scale!
[   46.714790] coretemp coretemp.1: Using relative temperature scale!
[   52.314722] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   52.383081] [drm] Initialized drm 1.1.0 20060810
[   52.412213] pci 0000:01:00.0: setting latency timer to 64
[   52.412285] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[   52.412718] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   52.638463] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   52.638498] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   52.638525] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   52.675704] [drm] Setting GART location based on new memory map
[   52.691212] [drm] Loading RV610 CP Microcode
[   52.691346] [drm] Loading RV610 PFP Microcode
[   52.706375] [drm] Resetting GPU
[   52.706430] [drm] writeback test succeeded in 1 usecs
[   53.527140] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[   63.087302] usb usb1: uevent
[   63.087360] usb 1-0:1.0: uevent
[   63.087397] usb usb2: uevent
[   63.087448] usb 2-0:1.0: uevent
[   63.087484] usb usb3: uevent
[   63.087534] usb 3-0:1.0: uevent
[   63.087570] usb usb4: uevent
[   63.087620] usb 4-0:1.0: uevent
[   63.087655] usb usb5: uevent
[   63.087706] usb 5-0:1.0: uevent
[   63.087741] usb usb6: uevent
[   63.087791] usb 6-0:1.0: uevent
[   63.087828] usb usb7: uevent
[   63.087878] usb 7-0:1.0: uevent
[   63.087914] usb 1-2: uevent
[   63.087964] usb 1-2:1.0: uevent
[   63.088004] usb 4-2: uevent
[   63.088055] usb 4-2:1.0: uevent
[   63.088092] usb 7-2: uevent
[   63.088143] usb 7-2:1.0: uevent