emerge log

Crypt-SSLeay-0.57.log (text/plain), 5.36 KB, created by Kirikaza on 2010-04-21 20:13:55 UTC

You should enable -g (or higher) for debugging!
 [32;01m*[0m CPV:  dev-perl/Crypt-SSLeay-0.57
 [32;01m*[0m REPO: gentoo
 [32;01m*[0m USE:  elibc_glibc kernel_linux test userland_GNU x86
>>> Unpacking source...
>>> Unpacking Crypt-SSLeay-0.57.tar.gz to /tmp/portage/dev-perl/Crypt-SSLeay-0.57/work
>>> Source unpacked in /tmp/portage/dev-perl/Crypt-SSLeay-0.57/work
>>> Compiling source in /tmp/portage/dev-perl/Crypt-SSLeay-0.57/work/Crypt-SSLeay-0.57 ...
 [32;01m*[0m Using ExtUtils::MakeMaker

BUILD INFORMATION
================================================
ssl library: OpenSSL 0.9.8 in /usr
ssl header:  openssl/ssl.h
libraries:   -L/usr/lib -lssl -lcrypto -lgcc
include dir: -I/usr/include/openssl
================================================
Checking if your kit is complete...
Looks good
Note (probably harmless): No library found for -lgcc
Writing Makefile for Crypt::SSLeay
The test suite can attempt to connect to public servers
to ensure that the code is working properly. If you are
behind a strict firewall or have no network connectivity,
these tests may fail (through no fault of the code).

Do you want to run the live tests (y/N) ? [N] N
make -j3 OTHERLDFLAGS=-Wl,-O1 
/usr/bin/perl5.10.1 /usr/lib/perl5/vendor_perl/5.10.1/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.10.1/ExtUtils/typemap -typemap typemap  SSLeay.xs > SSLeay.xsc && mv SSLeay.xsc SSLeay.c
Running Mkbootstrap for Crypt::SSLeay ()
chmod 644 SSLeay.bs
cp SSLeay.bs blib/arch/auto/Crypt/SSLeay/SSLeay.bs
chmod 644 blib/arch/auto/Crypt/SSLeay/SSLeay.bs
cp lib/Crypt/SSLeay/X509.pm blib/lib/Crypt/SSLeay/X509.pm
cp lib/Net/SSL.pm blib/lib/Net/SSL.pm
cp SSLeay.pm blib/lib/Crypt/SSLeay.pm
cp lib/Crypt/SSLeay/CTX.pm blib/lib/Crypt/SSLeay/CTX.pm
cp lib/Crypt/SSLeay/Conn.pm blib/lib/Crypt/SSLeay/Conn.pm
cp lib/Crypt/SSLeay/MainContext.pm blib/lib/Crypt/SSLeay/MainContext.pm
cp lib/Crypt/SSLeay/Err.pm blib/lib/Crypt/SSLeay/Err.pm
/usr/bin/gcc -c  -I/usr/include/openssl -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -march=pentium4 -ftracer -mfpmath=sse -pipe   -DVERSION=\"0.57\" -DXS_VERSION=\"0.57\" -fPIC "-I/usr/lib/perl5/5.10.1/i686-linux/CORE"   SSLeay.c
rm -f blib/arch/auto/Crypt/SSLeay/SSLeay.so
LD_RUN_PATH="/usr/lib" /usr/bin/gcc  -shared -O2 -march=pentium4 -ftracer -mfpmath=sse -pipe -L/usr/local/lib -fstack-protector SSLeay.o -Wl,-O1 -o blib/arch/auto/Crypt/SSLeay/SSLeay.so 	\
	   -L/usr/lib -lssl -lcrypto  	\
	  
chmod 755 blib/arch/auto/Crypt/SSLeay/SSLeay.so
>>> Source compiled.
make -j3 test TEST_VERBOSE=1 
PERL_DL_NONLAZY=1 /usr/bin/perl5.10.1 "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-basic.t .... 
1..12
ok 1 - use Crypt::SSLeay;
ok 2 - use Crypt::SSLeay::CTX;
ok 3 - use Crypt::SSLeay::Conn;
ok 4 - use Crypt::SSLeay::Err;
ok 5 - use Crypt::SSLeay::MainContext;
ok 6 - use Crypt::SSLeay::X509;
ok 7 - use Net::SSL;
ok 8 - POD test for SSLeay.pm
ok 9 - POD test for lib/Net/SSL.pm
ok 10 - Crypt-SSLeay POD coverage is go!
ok 11 - Net::SSL POD coverage is go!
ok 12 - we have a context
ok
t/01-connect.t .. 
1..8
not ok 1 - Net::SSL->new

#   Failed test 'Net::SSL->new'
#   at t/01-connect.t line 25.
# proxy connect failed: Bad arg length for Socket::pack_sockaddr_in, length is 9, should be 4 at /usr/lib/perl5/5.10.1/i686-linux/IO/Socket/INET.pm line 257.
# ;  at t/01-connect.t line 11
ok 2 # skip nothing listening on localhost:443
ok 3 # skip nothing listening on localhost:443
ok 4 # skip nothing listening on localhost:443
ok 5 # skip nothing listening on localhost:443
ok 6 # skip nothing listening on localhost:443
ok 7 # skip nothing listening on localhost:443
ok 8 # skip nothing listening on localhost:443
# Looks like you failed 1 test of 8.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/8 subtests 
	(less 7 skipped subtests: 0 okay)
t/02-live.t ..... 
1..4
ok 1 - use Net::SSL;
# config on linux
# ssl OpenSSL 0.9.8 in /usr
# lib -L/usr/lib -lssl -lcrypto -lgcc
# inc -I/usr/include/openssl
# cc /usr/bin/gcc
ok 2 - connect through proxy
ok 3 - can forward useragent string to proxy (network tests disabled)
ok 4 # skip Network tests disabled
ok

Test Summary Report
-------------------
t/01-connect.t (Wstat: 256 Tests: 8 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
Files=3, Tests=24,  1 wallclock secs ( 0.07 usr  0.01 sys +  0.64 cusr  0.07 csys =  0.79 CPU)
Result: FAIL
Failed 1/3 test programs. 1/24 subtests failed.
make: *** [test_dynamic] Error 255
 [31;01m*[0m ERROR: dev-perl/Crypt-SSLeay-0.57 failed:
 [31;01m*[0m   test failed
 [31;01m*[0m 
 [31;01m*[0m Call stack:
 [31;01m*[0m     ebuild.sh, line   54:  Called src_test
 [31;01m*[0m   environment, line 2604:  Called perl-module_src_test
 [31;01m*[0m   environment, line 2421:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m                   emake test TEST_VERBOSE=${TEST_VERBOSE:-0} || die "test failed";
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the output of 'emerge --info =dev-perl/Crypt-SSLeay-0.57',
 [31;01m*[0m the complete build log and the output of 'emerge -pqv =dev-perl/Crypt-SSLeay-0.57'.
 [31;01m*[0m The complete build log is located at '/var/log/portage/dev-perl:Crypt-SSLeay-0.57:20100421-201039.log'.
 [31;01m*[0m The ebuild environment file is located at '/tmp/portage/dev-perl/Crypt-SSLeay-0.57/temp/environment'.
 [31;01m*[0m S: '/tmp/portage/dev-perl/Crypt-SSLeay-0.57/work/Crypt-SSLeay-0.57'