config.log

config.log (text/plain), 101.20 KB, created by Piotr on 2010-03-28 10:58:43 UTC

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by wireshark configure 1.2.6, which was
generated by GNU Autoconf 2.65.  Invocation command line was

  $ ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --enable-wireshark --enable-profile-build --with-gnutls --with-gcrypt --enable-ipv6 --enable-threads --with-lua --without-krb5 --without-libsmi --with-pcap --with-zlib --with-pcre --with-geoip --without-portaudio --with-libcap --enable-setuid-install --sysconfdir=/etc/wireshark --without-adns --without-c-ares

## --------- ##
## Platform. ##
## --------- ##

hostname = moonlight
uname -m = x86_64
uname -r = 2.6.33-gentoo
uname -s = Linux
uname -v = #3 SMP PREEMPT Mon Mar 1 23:45:58 CET 2010

/usr/bin/uname -p = AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /usr/lib/ccache/bin
PATH: /usr/lib64/portage/bin/ebuild-helpers
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /opt/bin
PATH: /usr/x86_64-pc-linux-gnu/gcc-bin/4.4.3
PATH: /usr/kde/3.5/sbin
PATH: /usr/kde/3.5/bin
PATH: /usr/qt/3/bin
PATH: /opt/eagle-5.7.0/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2642: checking for a BSD-compatible install
configure:2710: result: /usr/bin/install -c
configure:2721: checking whether build environment is sane
configure:2758: result: yes
configure:2885: checking for a thread-safe mkdir -p
configure:2924: result: /bin/mkdir -p
configure:2937: checking for gawk
configure:2953: found /usr/bin/gawk
configure:2964: result: gawk
configure:2975: checking whether make sets $(MAKE)
configure:2997: result: yes
configure:3072: checking how to create a ustar tar archive
configure:3085: tar --version
tar (GNU tar) 1.22
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Written by John Gilmore and Jay Fenlason.
configure:3088: $? = 0
configure:3128: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
configure:3131: $? = 0
configure:3135: tar -xf - <conftest.tar
configure:3138: $? = 0
configure:3151: result: gnutar
configure:3199: checking for x86_64-pc-linux-gnu-gcc
configure:3215: found /usr/lib/ccache/bin/x86_64-pc-linux-gnu-gcc
configure:3226: result: x86_64-pc-linux-gnu-gcc
configure:3495: checking for C compiler version
configure:3504: x86_64-pc-linux-gnu-gcc --version >&5
x86_64-pc-linux-gnu-gcc (Gentoo 4.4.3 p1.0) 4.4.3
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3515: $? = 0
configure:3504: x86_64-pc-linux-gnu-gcc -v >&5
Using built-in specs.
Target: x86_64-pc-linux-gnu
Configured with: /var/tmp/portage/sys-devel/gcc-4.4.3/work/gcc-4.4.3/configure --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.4.3 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.3/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.3 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.3/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.3/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.3/include/g++-v4 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --disable-fixed-point --without-ppl --without-cloog --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --enable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --enable-cld --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.4.3/python --disable-libgcj --enable-languages=c,c++,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.4.3 p1.0'
Thread model: posix
gcc version 4.4.3 (Gentoo 4.4.3 p1.0) 
configure:3515: $? = 0
configure:3504: x86_64-pc-linux-gnu-gcc -V >&5
x86_64-pc-linux-gnu-gcc: '-V' option must have argument
configure:3515: $? = 1
configure:3504: x86_64-pc-linux-gnu-gcc -qversion >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-qversion'
x86_64-pc-linux-gnu-gcc: no input files
configure:3515: $? = 1
configure:3535: checking whether the C compiler works
configure:3557: x86_64-pc-linux-gnu-gcc -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:3561: $? = 0
configure:3610: result: yes
configure:3613: checking for C compiler default output file name
configure:3615: result: a.out
configure:3621: checking for suffix of executables
configure:3628: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:3632: $? = 0
configure:3654: result: 
configure:3676: checking whether we are cross compiling
configure:3684: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:3688: $? = 0
configure:3695: ./conftest
configure:3699: $? = 0
configure:3714: result: no
configure:3719: checking for suffix of object files
configure:3741: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:3745: $? = 0
configure:3766: result: o
configure:3770: checking whether we are using the GNU C compiler
configure:3789: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:3789: $? = 0
configure:3798: result: yes
configure:3807: checking whether x86_64-pc-linux-gnu-gcc accepts -g
configure:3827: x86_64-pc-linux-gnu-gcc -c -g  conftest.c >&5
configure:3827: $? = 0
configure:3868: result: yes
configure:3885: checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89
configure:3949: x86_64-pc-linux-gnu-gcc  -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:3949: $? = 0
configure:3962: result: none needed
configure:3993: checking for style of include used by make
configure:4021: result: GNU
configure:4046: checking dependency style of x86_64-pc-linux-gnu-gcc
configure:4156: result: gcc3
configure:4172: checking whether x86_64-pc-linux-gnu-gcc and cc understand -c and -o together
configure:4203: x86_64-pc-linux-gnu-gcc -c conftest.c -o conftest2.o >&5
configure:4207: $? = 0
configure:4213: x86_64-pc-linux-gnu-gcc -c conftest.c -o conftest2.o >&5
configure:4217: $? = 0
configure:4228: cc -c conftest.c >&5
configure:4232: $? = 0
configure:4240: cc -c conftest.c -o conftest2.o >&5
configure:4244: $? = 0
configure:4250: cc -c conftest.c -o conftest2.o >&5
configure:4254: $? = 0
configure:4272: result: yes
configure:4302: checking how to run the C preprocessor
configure:4333: x86_64-pc-linux-gnu-gcc -E  conftest.c
configure:4333: $? = 0
configure:4347: x86_64-pc-linux-gnu-gcc -E  conftest.c
conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
configure:4347: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:4372: result: x86_64-pc-linux-gnu-gcc -E
configure:4392: x86_64-pc-linux-gnu-gcc -E  conftest.c
configure:4392: $? = 0
configure:4406: x86_64-pc-linux-gnu-gcc -E  conftest.c
conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
configure:4406: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:4468: checking build system type
configure:4482: result: x86_64-pc-linux-gnu
configure:4502: checking host system type
configure:4515: result: x86_64-pc-linux-gnu
configure:4535: checking for a sed that does not truncate output
configure:4599: result: /bin/sed
configure:4617: checking for grep that handles long lines and -e
configure:4675: result: /bin/grep
configure:4680: checking for egrep
configure:4742: result: /bin/grep -E
configure:4747: checking for fgrep
configure:4809: result: /bin/grep -F
configure:4844: checking for ld used by x86_64-pc-linux-gnu-gcc
configure:4911: result: /usr/x86_64-pc-linux-gnu/bin/ld
configure:4918: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld
configure:4933: result: yes
configure:4945: checking for BSD- or MS-compatible name lister (nm)
configure:4994: result: /usr/bin/nm -B
configure:5112: checking the name lister (/usr/bin/nm -B) interface
configure:5119: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:5122: /usr/bin/nm -B "conftest.o"
configure:5125: output
0000000000000000 B some_variable
configure:5132: result: BSD nm
configure:5135: checking whether ln -s works
configure:5139: result: yes
configure:5147: checking the maximum length of command line arguments
configure:5267: result: 1572864
configure:5284: checking whether the shell understands some XSI constructs
configure:5294: result: yes
configure:5298: checking whether the shell understands "+="
configure:5304: result: yes
configure:5339: checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files
configure:5346: result: -r
configure:5375: checking for x86_64-pc-linux-gnu-objdump
configure:5391: found /usr/bin/x86_64-pc-linux-gnu-objdump
configure:5402: result: x86_64-pc-linux-gnu-objdump
configure:5474: checking how to recognize dependent libraries
configure:5670: result: pass_all
configure:5690: checking for x86_64-pc-linux-gnu-ar
configure:5706: found /usr/bin/x86_64-pc-linux-gnu-ar
configure:5717: result: x86_64-pc-linux-gnu-ar
configure:5795: checking for x86_64-pc-linux-gnu-strip
configure:5811: found /usr/bin/x86_64-pc-linux-gnu-strip
configure:5822: result: x86_64-pc-linux-gnu-strip
configure:5894: checking for x86_64-pc-linux-gnu-ranlib
configure:5910: found /usr/bin/x86_64-pc-linux-gnu-ranlib
configure:5921: result: x86_64-pc-linux-gnu-ranlib
configure:6051: checking command to parse /usr/bin/nm -B output from x86_64-pc-linux-gnu-gcc object
configure:6169: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:6172: $? = 0
configure:6176: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6179: $? = 0
configure:6233: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c conftstm.o >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:6236: $? = 0
configure:6274: result: ok
configure:6370: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:6373: $? = 0
configure:7079: checking for ANSI C header files
configure:7099: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7099: $? = 0
configure:7172: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7172: $? = 0
configure:7172: ./conftest
configure:7172: $? = 0
configure:7183: result: yes
configure:7196: checking for sys/types.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for sys/stat.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for stdlib.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for string.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for memory.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for strings.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for inttypes.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for stdint.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7196: checking for unistd.h
configure:7196: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7196: $? = 0
configure:7196: result: yes
configure:7211: checking for dlfcn.h
configure:7211: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:7211: $? = 0
configure:7211: result: yes
configure:7363: checking for objdir
configure:7378: result: .libs
configure:7670: checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions
configure:7688: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -fno-rtti -fno-exceptions conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:7692: $? = 0
configure:7705: result: no
configure:7725: checking for x86_64-pc-linux-gnu-gcc option to produce PIC
configure:7997: result: -fPIC -DPIC
configure:8009: checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works
configure:8027: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -fPIC -DPIC -DPIC conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:8031: $? = 0
configure:8044: result: yes
configure:8068: checking if x86_64-pc-linux-gnu-gcc static flag -static works
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:8096: result: yes
configure:8111: checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o
configure:8132: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -o out/conftest2.o conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:8136: $? = 0
configure:8158: result: yes
configure:8166: checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o
configure:8213: result: yes
configure:8246: checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries
configure:9232: result: yes
configure:9269: checking whether -lc should be explicitly linked in
configure:9274: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:9277: $? = 0
configure:9292: x86_64-pc-linux-gnu-gcc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep  -lc  \>/dev/null 2\>\&1
configure:9295: $? = 0
configure:9307: result: no
configure:9471: checking dynamic linker characteristics
configure:9917: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 -Wl,-rpath -Wl,/foo conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:9917: $? = 0
configure:10135: result: GNU/Linux ld.so
configure:10237: checking how to hardcode library paths into programs
configure:10262: result: immediate
configure:10356: checking for shl_load
configure:10356: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
/var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/temp/ccbSnDGc.o: In function `main':
conftest.c:(.text+0x7): undefined reference to `shl_load'
collect2: ld returned 1 exit status
configure:10356: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| /* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
|    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
| #define shl_load innocuous_shl_load
| 
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char shl_load (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */
| 
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| 
| #undef shl_load
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| /* The GNU C library defines this for functions which it implements
|     to always fail with ENOSYS.  Some functions are actually named
|     something starting with __ and the normal name is an alias.  */
| #if defined __stub_shl_load || defined __stub___shl_load
| choke me
| #endif
| 
| int
| main ()
| {
| return shl_load ();
|   ;
|   return 0;
| }
configure:10356: result: no
configure:10360: checking for shl_load in -ldld
configure:10385: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c -ldld   >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -ldld
collect2: ld returned 1 exit status
configure:10385: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| int
| main ()
| {
| return shl_load ();
|   ;
|   return 0;
| }
configure:10394: result: no
configure:10399: checking for dlopen
configure:10399: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
/var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/temp/ccBbCCAk.o: In function `main':
conftest.c:(.text+0x7): undefined reference to `dlopen'
collect2: ld returned 1 exit status
configure:10399: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| /* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
|    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
| #define dlopen innocuous_dlopen
| 
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char dlopen (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */
| 
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| 
| #undef dlopen
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dlopen ();
| /* The GNU C library defines this for functions which it implements
|     to always fail with ENOSYS.  Some functions are actually named
|     something starting with __ and the normal name is an alias.  */
| #if defined __stub_dlopen || defined __stub___dlopen
| choke me
| #endif
| 
| int
| main ()
| {
| return dlopen ();
|   ;
|   return 0;
| }
configure:10399: result: no
configure:10403: checking for dlopen in -ldl
configure:10428: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c -ldl   >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:10428: $? = 0
configure:10437: result: yes
configure:10556: checking whether a program can dlopen itself
configure:10626: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -DHAVE_DLFCN_H -Wl,-O1 -Wl,--export-dynamic conftest.c -ldl  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:10629: $? = 0
configure:10647: result: yes
configure:10652: checking whether a statically linked program can dlopen itself
configure:10722: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -DHAVE_DLFCN_H -Wl,-O1 -Wl,--export-dynamic -static conftest.c -ldl  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
/var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/temp/ccDiVEXy.o: In function `main':
conftest.c:(.text+0x19): warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
configure:10725: $? = 0
/lib64/: cannot read file data: Is a directory
configure:10743: result: no
configure:10782: checking whether stripping libraries is possible
configure:10787: result: yes
configure:10822: checking if libtool supports shared libraries
configure:10824: result: yes
configure:10827: checking whether to build shared libraries
configure:10848: result: yes
configure:10851: checking whether to build static libraries
configure:10855: result: no
configure:10892: checking for perl
configure:10910: found /usr/bin/perl
configure:10922: result: /usr/bin/perl
configure:10934: checking for bison
configure:10950: found /usr/bin/bison
configure:10961: result: bison -y
configure:10975: checking for bison
configure:10993: found /usr/bin/bison
configure:11005: result: /usr/bin/bison
configure:11021: checking for flex
configure:11037: found /usr/bin/flex
configure:11048: result: flex
configure:11085: flex conftest.l
configure:11089: $? = 0
configure:11091: checking lex output file root
configure:11105: result: lex.yy
configure:11110: checking lex library
configure:11124: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c   >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
lex.yy.c: In function 'yylex':
conftest.l:2: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
conftest.l:9: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
/var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/temp/ccN937EI.o: In function `yylex':
conftest.c:(.text+0x11d7): undefined reference to `yywrap'
conftest.c:(.text+0x1584): undefined reference to `yywrap'
/var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/temp/ccN937EI.o: In function `main':
conftest.c:(.text+0x1799): undefined reference to `yywrap'
collect2: ld returned 1 exit status
configure:11124: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| 
| #line 3 "lex.yy.c"
| 
| #define  YY_INT_ALIGNED short int
| 
| /* A lexical scanner generated by flex */
| 
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 35
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
| 
| /* First, we deal with  platform-specific or compiler-specific issues. */
| 
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
| 
| /* end standard C headers. */
| 
| /* flex integer type definitions */
| 
| #ifndef FLEXINT_H
| #define FLEXINT_H
| 
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
| 
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
| 
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
|  * if you want the limit (max/min) macros for int types. 
|  */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
| 
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t; 
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
| 
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN               (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN              (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN              (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX               (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX              (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX              (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX              (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX             (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX             (4294967295U)
| #endif
| 
| #endif /* ! FLEXINT_H */
| 
| #ifdef __cplusplus
| 
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
| 
| #else	/* ! __cplusplus */
| 
| /* C99 requires __STDC__ to be defined as 1. */
| #if defined (__STDC__)
| 
| #define YY_USE_CONST
| 
| #endif	/* defined (__STDC__) */
| #endif	/* ! __cplusplus */
| 
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
| 
| /* Returned upon end-of-file. */
| #define YY_NULL 0
| 
| /* Promotes a possibly negative, possibly signed char to an unsigned
|  * integer for use as an array index.  If the signed char is negative,
|  * we want to instead treat it as an 8-bit unsigned char, hence the
|  * double cast.
|  */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
| 
| /* Enter a start condition.  This macro really ought to take a parameter,
|  * but we do it the disgusting crufty way forced on us by the ()-less
|  * definition of BEGIN.
|  */
| #define BEGIN (yy_start) = 1 + 2 *
| 
| /* Translate the current start state into a value that can be later handed
|  * to BEGIN to return to the state.  The YYSTATE alias is for lex
|  * compatibility.
|  */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
| 
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
| 
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin  )
| 
| #define YY_END_OF_BUFFER_CHAR 0
| 
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
| 
| /* The state buf must be large enough to hold one state per character in the main buffer.
|  */
| #define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
| 
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
| 
| extern int yyleng;
| 
| extern FILE *yyin, *yyout;
| 
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
| 
|     #define YY_LESS_LINENO(n)
|     
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| 	do \
| 		{ \
| 		/* Undo effects of setting up yytext. */ \
|         int yyless_macro_arg = (n); \
|         YY_LESS_LINENO(yyless_macro_arg);\
| 		*yy_cp = (yy_hold_char); \
| 		YY_RESTORE_YY_MORE_OFFSET \
| 		(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| 		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| 		} \
| 	while ( 0 )
| 
| #define unput(c) yyunput( c, (yytext_ptr)  )
| 
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
| 
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| 	{
| 	FILE *yy_input_file;
| 
| 	char *yy_ch_buf;		/* input buffer */
| 	char *yy_buf_pos;		/* current position in input buffer */
| 
| 	/* Size of input buffer in bytes, not including room for EOB
| 	 * characters.
| 	 */
| 	yy_size_t yy_buf_size;
| 
| 	/* Number of characters read into yy_ch_buf, not including EOB
| 	 * characters.
| 	 */
| 	int yy_n_chars;
| 
| 	/* Whether we "own" the buffer - i.e., we know we created it,
| 	 * and can realloc() it to grow it, and should free() it to
| 	 * delete it.
| 	 */
| 	int yy_is_our_buffer;
| 
| 	/* Whether this is an "interactive" input source; if so, and
| 	 * if we're using stdio for input, then we want to use getc()
| 	 * instead of fread(), to make sure we stop fetching input after
| 	 * each newline.
| 	 */
| 	int yy_is_interactive;
| 
| 	/* Whether we're considered to be at the beginning of a line.
| 	 * If so, '^' rules will be active on the next match, otherwise
| 	 * not.
| 	 */
| 	int yy_at_bol;
| 
|     int yy_bs_lineno; /**< The line count. */
|     int yy_bs_column; /**< The column count. */
|     
| 	/* Whether to try to fill the input buffer when we reach the
| 	 * end of it.
| 	 */
| 	int yy_fill_buffer;
| 
| 	int yy_buffer_status;
| 
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| 	/* When an EOF's been seen but there's still some text to process
| 	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| 	 * shouldn't try reading from the input source any more.  We might
| 	 * still have a bunch of tokens to match, though, because of
| 	 * possible backing-up.
| 	 *
| 	 * When we actually see the EOF, we change the status to "new"
| 	 * (via yyrestart()), so that the user can continue scanning by
| 	 * just pointing yyin at a new input file.
| 	 */
| #define YY_BUFFER_EOF_PENDING 2
| 
| 	};
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
| 
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
| 
| /* We provide macros for accessing buffer states in case in the
|  * future we want to put the buffer states in a more general
|  * "scanner state".
|  *
|  * Returns the top of the stack, or NULL.
|  */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
|                           ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
|                           : NULL)
| 
| /* Same as previous macro, but useful when we know that the buffer stack is not
|  * NULL or when we need an lvalue. For internal use only.
|  */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
| 
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars;		/* number of characters read into yy_ch_buf */
| int yyleng;
| 
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0;		/* whether we need to initialize */
| static int yy_start = 0;	/* start state number */
| 
| /* Flag which is used to allow yywrap()'s to do buffer switches
|  * instead of setting up a fresh yyin.  A bit of a hack ...
|  */
| static int yy_did_buffer_switch_on_eof;
| 
| void yyrestart (FILE *input_file  );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer  );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size  );
| void yy_delete_buffer (YY_BUFFER_STATE b  );
| void yy_flush_buffer (YY_BUFFER_STATE b  );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer  );
| void yypop_buffer_state (void );
| 
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file  );
| 
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
| 
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size  );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str  );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len  );
| 
| void *yyalloc (yy_size_t  );
| void *yyrealloc (void *,yy_size_t  );
| void yyfree (void *  );
| 
| #define yy_new_buffer yy_create_buffer
| 
| #define yy_set_interactive(is_interactive) \
| 	{ \
| 	if ( ! YY_CURRENT_BUFFER ){ \
|         yyensure_buffer_stack (); \
| 		YY_CURRENT_BUFFER_LVALUE =    \
|             yy_create_buffer(yyin,YY_BUF_SIZE ); \
| 	} \
| 	YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| 	}
| 
| #define yy_set_bol(at_bol) \
| 	{ \
| 	if ( ! YY_CURRENT_BUFFER ){\
|         yyensure_buffer_stack (); \
| 		YY_CURRENT_BUFFER_LVALUE =    \
|             yy_create_buffer(yyin,YY_BUF_SIZE ); \
| 	} \
| 	YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| 	}
| 
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
| 
| /* Begin user sect3 */
| 
| typedef unsigned char YY_CHAR;
| 
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
| 
| typedef int yy_state_type;
| 
| extern int yylineno;
| 
| int yylineno = 1;
| 
| extern char *yytext;
| #define yytext_ptr yytext
| 
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state  );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[]  );
| 
| /* Done after the current pattern has been matched and before the
|  * corresponding action - sets up yytext.
|  */
| #define YY_DO_BEFORE_ACTION \
| 	(yytext_ptr) = yy_bp; \
| 	(yytext_ptr) -= (yy_more_len); \
| 	yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| 	(yy_hold_char) = *yy_cp; \
| 	*yy_cp = '\0'; \
| 	(yy_c_buf_p) = yy_cp;
| 
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
|    but its presence is necessary. */
| struct yy_trans_info
| 	{
| 	flex_int32_t yy_verify;
| 	flex_int32_t yy_nxt;
| 	};
| static yyconst flex_int16_t yy_acclist[23] =
|     {   0,
|         9,    7,    8,    8,    1,    7,    8,    2,    7,    8,
|         3,    7,    8,    4,    7,    8,    5,    7,    8,    6,
|         7,    8
|     } ;
| 
| static yyconst flex_int16_t yy_accept[14] =
|     {   0,
|         1,    1,    1,    2,    4,    5,    8,   11,   14,   17,
|        20,   23,   23
|     } ;
| 
| static yyconst flex_int32_t yy_ec[256] =
|     {   0,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    2,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    3,    4,    5,    6,
| 
|         7,    8,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
| 
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1
|     } ;
| 
| static yyconst flex_int32_t yy_meta[9] =
|     {   0,
|         1,    1,    1,    1,    1,    1,    1,    1
|     } ;
| 
| static yyconst flex_int16_t yy_base[13] =
|     {   0,
|         0,    0,    9,   10,   10,   10,   10,   10,   10,   10,
|        10,   10
|     } ;
| 
| static yyconst flex_int16_t yy_def[13] =
|     {   0,
|        12,    1,   12,   12,   12,   12,   12,   12,   12,   12,
|        12,    0
|     } ;
| 
| static yyconst flex_int16_t yy_nxt[19] =
|     {   0,
|         4,    5,    6,    7,    8,    9,   10,   11,   12,    3,
|        12,   12,   12,   12,   12,   12,   12,   12
|     } ;
| 
| static yyconst flex_int16_t yy_chk[19] =
|     {   0,
|         1,    1,    1,    1,    1,    1,    1,    1,    3,   12,
|        12,   12,   12,   12,   12,   12,   12,   12
|     } ;
| 
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
| 
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
| 
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 468 "lex.yy.c"
| 
| #define INITIAL 0
| 
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
|  * down here because we want the user's section 1 to have been scanned first.
|  * The user has a chance to override it with an option.
|  */
| #include <unistd.h>
| #endif
| 
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
| 
| static int yy_init_globals (void );
| 
| /* Accessor methods to globals.
|    These are made visible to non-reentrant scanners for convenience. */
| 
| int yylex_destroy (void );
| 
| int yyget_debug (void );
| 
| void yyset_debug (int debug_flag  );
| 
| YY_EXTRA_TYPE yyget_extra (void );
| 
| void yyset_extra (YY_EXTRA_TYPE user_defined  );
| 
| FILE *yyget_in (void );
| 
| void yyset_in  (FILE * in_str  );
| 
| FILE *yyget_out (void );
| 
| void yyset_out  (FILE * out_str  );
| 
| int yyget_leng (void );
| 
| char *yyget_text (void );
| 
| int yyget_lineno (void );
| 
| void yyset_lineno (int line_number  );
| 
| /* Macros after this point can all be overridden by user definitions in
|  * section 1.
|  */
| 
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
| 
|     static void yyunput (int c,char *buf_ptr  );
|     
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
| 
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
| 
| #ifndef YY_NO_INPUT
| 
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
| 
| #endif
| 
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
| 
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
|  * we now use fwrite().
|  */
| #define ECHO fwrite( yytext, yyleng, 1, yyout )
| #endif
| 
| /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
|  * is returned in "result".
|  */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| 	if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| 		{ \
| 		int c = '*'; \
| 		int n; \
| 		for ( n = 0; n < max_size && \
| 			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| 			buf[n] = (char) c; \
| 		if ( c == '\n' ) \
| 			buf[n++] = (char) c; \
| 		if ( c == EOF && ferror( yyin ) ) \
| 			YY_FATAL_ERROR( "input in flex scanner failed" ); \
| 		result = n; \
| 		} \
| 	else \
| 		{ \
| 		errno=0; \
| 		while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| 			{ \
| 			if( errno != EINTR) \
| 				{ \
| 				YY_FATAL_ERROR( "input in flex scanner failed" ); \
| 				break; \
| 				} \
| 			errno=0; \
| 			clearerr(yyin); \
| 			} \
| 		}\
| \
| 
| #endif
| 
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
|  * we don't want an extra ';' after the "return" because that will cause
|  * some compilers to complain about unreachable statements.
|  */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
| 
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
| 
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
| 
| /* end tables serialization structures and prototypes */
| 
| /* Default declaration of generated scanner - a define so the user can
|  * easily add parameters.
|  */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
| 
| extern int yylex (void);
| 
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
| 
| /* Code executed at the beginning of each rule, after yytext and yyleng
|  * have been set up.
|  */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
| 
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
| 
| #define YY_RULE_SETUP \
| 	YY_USER_ACTION
| 
| /** The main scanner function which does all the work.
|  */
| YY_DECL
| {
| 	register yy_state_type yy_current_state;
| 	register char *yy_cp, *yy_bp;
| 	register int yy_act;
|     
| #line 1 "conftest.l"
| 
| #line 652 "lex.yy.c"
| 
| 	if ( !(yy_init) )
| 		{
| 		(yy_init) = 1;
| 
| #ifdef YY_USER_INIT
| 		YY_USER_INIT;
| #endif
| 
|         /* Create the reject buffer large enough to save one state per allowed character. */
|         if ( ! (yy_state_buf) )
|             (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE  );
|             if ( ! (yy_state_buf) )
|                 YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
| 
| 		if ( ! (yy_start) )
| 			(yy_start) = 1;	/* first start state */
| 
| 		if ( ! yyin )
| 			yyin = stdin;
| 
| 		if ( ! yyout )
| 			yyout = stdout;
| 
| 		if ( ! YY_CURRENT_BUFFER ) {
| 			yyensure_buffer_stack ();
| 			YY_CURRENT_BUFFER_LVALUE =
| 				yy_create_buffer(yyin,YY_BUF_SIZE );
| 		}
| 
| 		yy_load_buffer_state( );
| 		}
| 
| 	while ( 1 )		/* loops until end-of-file is reached */
| 		{
| 		(yy_more_len) = 0;
| 		if ( (yy_more_flag) )
| 			{
| 			(yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| 			(yy_more_flag) = 0;
| 			}
| 		yy_cp = (yy_c_buf_p);
| 
| 		/* Support of yytext. */
| 		*yy_cp = (yy_hold_char);
| 
| 		/* yy_bp points to the position in yy_ch_buf of the start of
| 		 * the current run.
| 		 */
| 		yy_bp = yy_cp;
| 
| 		yy_current_state = (yy_start);
| 
| 		(yy_state_ptr) = (yy_state_buf);
| 		*(yy_state_ptr)++ = yy_current_state;
| 
| yy_match:
| 		do
| 			{
| 			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| 			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| 				{
| 				yy_current_state = (int) yy_def[yy_current_state];
| 				if ( yy_current_state >= 13 )
| 					yy_c = yy_meta[(unsigned int) yy_c];
| 				}
| 			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| 			*(yy_state_ptr)++ = yy_current_state;
| 			++yy_cp;
| 			}
| 		while ( yy_base[yy_current_state] != 10 );
| 
| yy_find_action:
| 		yy_current_state = *--(yy_state_ptr);
| 		(yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| 		for ( ; ; ) /* until we find what rule we matched */
| 			{
| 			if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| 				{
| 				yy_act = yy_acclist[(yy_lp)];
| 					{
| 					(yy_full_match) = yy_cp;
| 					break;
| 					}
| 				}
| 			--yy_cp;
| 			yy_current_state = *--(yy_state_ptr);
| 			(yy_lp) = yy_accept[yy_current_state];
| 			}
| 
| 		YY_DO_BEFORE_ACTION;
| 
| do_action:	/* This label is used only to access EOF actions. */
| 
| 		switch ( yy_act )
| 	{ /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| 	YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| 	YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| 	YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| 	YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| 	YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| 	YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| 	YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| 	YY_BREAK
| #line 790 "lex.yy.c"
| 			case YY_STATE_EOF(INITIAL):
| 				yyterminate();
| 
| 	case YY_END_OF_BUFFER:
| 		{
| 		/* Amount of text matched not including the EOB char. */
| 		int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
| 
| 		/* Undo the effects of YY_DO_BEFORE_ACTION. */
| 		*yy_cp = (yy_hold_char);
| 		YY_RESTORE_YY_MORE_OFFSET
| 
| 		if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| 			{
| 			/* We're scanning a new file or input source.  It's
| 			 * possible that this happened because the user
| 			 * just pointed yyin at a new source and called
| 			 * yylex().  If so, then we have to assure
| 			 * consistency between YY_CURRENT_BUFFER and our
| 			 * globals.  Here is the right place to do so, because
| 			 * this is the first action (other than possibly a
| 			 * back-up) that will match for the new input source.
| 			 */
| 			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| 			YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| 			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| 			}
| 
| 		/* Note that here we test for yy_c_buf_p "<=" to the position
| 		 * of the first EOB in the buffer, since yy_c_buf_p will
| 		 * already have been incremented past the NUL character
| 		 * (since all states make transitions on EOB to the
| 		 * end-of-buffer state).  Contrast this with the test
| 		 * in input().
| 		 */
| 		if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| 			{ /* This was really a NUL. */
| 			yy_state_type yy_next_state;
| 
| 			(yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
| 
| 			yy_current_state = yy_get_previous_state(  );
| 
| 			/* Okay, we're now positioned to make the NUL
| 			 * transition.  We couldn't have
| 			 * yy_get_previous_state() go ahead and do it
| 			 * for us because it doesn't know how to deal
| 			 * with the possibility of jamming (and we don't
| 			 * want to build jamming into it because then it
| 			 * will run more slowly).
| 			 */
| 
| 			yy_next_state = yy_try_NUL_trans( yy_current_state );
| 
| 			yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| 
| 			if ( yy_next_state )
| 				{
| 				/* Consume the NUL. */
| 				yy_cp = ++(yy_c_buf_p);
| 				yy_current_state = yy_next_state;
| 				goto yy_match;
| 				}
| 
| 			else
| 				{
| 				yy_cp = (yy_c_buf_p);
| 				goto yy_find_action;
| 				}
| 			}
| 
| 		else switch ( yy_get_next_buffer(  ) )
| 			{
| 			case EOB_ACT_END_OF_FILE:
| 				{
| 				(yy_did_buffer_switch_on_eof) = 0;
| 
| 				if ( yywrap( ) )
| 					{
| 					/* Note: because we've taken care in
| 					 * yy_get_next_buffer() to have set up
| 					 * yytext, we can now set up
| 					 * yy_c_buf_p so that if some total
| 					 * hoser (like flex itself) wants to
| 					 * call the scanner after we return the
| 					 * YY_NULL, it'll still work - another
| 					 * YY_NULL will get returned.
| 					 */
| 					(yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
| 
| 					yy_act = YY_STATE_EOF(YY_START);
| 					goto do_action;
| 					}
| 
| 				else
| 					{
| 					if ( ! (yy_did_buffer_switch_on_eof) )
| 						YY_NEW_FILE;
| 					}
| 				break;
| 				}
| 
| 			case EOB_ACT_CONTINUE_SCAN:
| 				(yy_c_buf_p) =
| 					(yytext_ptr) + yy_amount_of_matched_text;
| 
| 				yy_current_state = yy_get_previous_state(  );
| 
| 				yy_cp = (yy_c_buf_p);
| 				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| 				goto yy_match;
| 
| 			case EOB_ACT_LAST_MATCH:
| 				(yy_c_buf_p) =
| 				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
| 
| 				yy_current_state = yy_get_previous_state(  );
| 
| 				yy_cp = (yy_c_buf_p);
| 				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| 				goto yy_find_action;
| 			}
| 		break;
| 		}
| 
| 	default:
| 		YY_FATAL_ERROR(
| 			"fatal flex scanner internal error--no action found" );
| 	} /* end of action switch */
| 		} /* end of scanning one token */
| } /* end of yylex */
| 
| /* yy_get_next_buffer - try to read in a new buffer
|  *
|  * Returns a code representing an action:
|  *	EOB_ACT_LAST_MATCH -
|  *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
|  *	EOB_ACT_END_OF_FILE - end of file
|  */
| static int yy_get_next_buffer (void)
| {
|     	register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| 	register char *source = (yytext_ptr);
| 	register int number_to_move, i;
| 	int ret_val;
| 
| 	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| 		YY_FATAL_ERROR(
| 		"fatal flex scanner internal error--end of buffer missed" );
| 
| 	if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| 		{ /* Don't try to fill the buffer, so this is an EOF. */
| 		if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| 			{
| 			/* We matched a single character, the EOB, so
| 			 * treat this as a final EOF.
| 			 */
| 			return EOB_ACT_END_OF_FILE;
| 			}
| 
| 		else
| 			{
| 			/* We matched some text prior to the EOB, first
| 			 * process it.
| 			 */
| 			return EOB_ACT_LAST_MATCH;
| 			}
| 		}
| 
| 	/* Try to read more data. */
| 
| 	/* First move last chars to start of buffer. */
| 	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
| 
| 	for ( i = 0; i < number_to_move; ++i )
| 		*(dest++) = *(source++);
| 
| 	if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| 		/* don't do the read, it's not guaranteed to return an EOF,
| 		 * just force an EOF
| 		 */
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
| 
| 	else
| 		{
| 			int num_to_read =
| 			YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
| 
| 		while ( num_to_read <= 0 )
| 			{ /* Not enough room in the buffer - grow it. */
| 
| 			YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
| 
| 			}
| 
| 		if ( num_to_read > YY_READ_BUF_SIZE )
| 			num_to_read = YY_READ_BUF_SIZE;
| 
| 		/* Read in more data. */
| 		YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| 			(yy_n_chars), (size_t) num_to_read );
| 
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| 		}
| 
| 	if ( (yy_n_chars) == 0 )
| 		{
| 		if ( number_to_move == YY_MORE_ADJ )
| 			{
| 			ret_val = EOB_ACT_END_OF_FILE;
| 			yyrestart(yyin  );
| 			}
| 
| 		else
| 			{
| 			ret_val = EOB_ACT_LAST_MATCH;
| 			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| 				YY_BUFFER_EOF_PENDING;
| 			}
| 		}
| 
| 	else
| 		ret_val = EOB_ACT_CONTINUE_SCAN;
| 
| 	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| 		/* Extend the array by 50%, plus the number we really need. */
| 		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| 		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
| 		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| 			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| 	}
| 
| 	(yy_n_chars) += number_to_move;
| 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
| 
| 	(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
| 
| 	return ret_val;
| }
| 
| /* yy_get_previous_state - get the state just before the EOB char was reached */
| 
|     static yy_state_type yy_get_previous_state (void)
| {
| 	register yy_state_type yy_current_state;
| 	register char *yy_cp;
|     
| 	yy_current_state = (yy_start);
| 
| 	(yy_state_ptr) = (yy_state_buf);
| 	*(yy_state_ptr)++ = yy_current_state;
| 
| 	for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| 		{
| 		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| 		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| 			{
| 			yy_current_state = (int) yy_def[yy_current_state];
| 			if ( yy_current_state >= 13 )
| 				yy_c = yy_meta[(unsigned int) yy_c];
| 			}
| 		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| 		*(yy_state_ptr)++ = yy_current_state;
| 		}
| 
| 	return yy_current_state;
| }
| 
| /* yy_try_NUL_trans - try to make a transition on the NUL character
|  *
|  * synopsis
|  *	next_state = yy_try_NUL_trans( current_state );
|  */
|     static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
| {
| 	register int yy_is_jam;
|     
| 	register YY_CHAR yy_c = 1;
| 	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| 		{
| 		yy_current_state = (int) yy_def[yy_current_state];
| 		if ( yy_current_state >= 13 )
| 			yy_c = yy_meta[(unsigned int) yy_c];
| 		}
| 	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| 	yy_is_jam = (yy_current_state == 12);
| 	if ( ! yy_is_jam )
| 		*(yy_state_ptr)++ = yy_current_state;
| 
| 	return yy_is_jam ? 0 : yy_current_state;
| }
| 
|     static void yyunput (int c, register char * yy_bp )
| {
| 	register char *yy_cp;
|     
|     yy_cp = (yy_c_buf_p);
| 
| 	/* undo effects of setting up yytext */
| 	*yy_cp = (yy_hold_char);
| 
| 	if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| 		{ /* need to shift things up to make room */
| 		/* +2 for EOB chars. */
| 		register int number_to_move = (yy_n_chars) + 2;
| 		register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| 					YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| 		register char *source =
| 				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
| 
| 		while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| 			*--dest = *--source;
| 
| 		yy_cp += (int) (dest - source);
| 		yy_bp += (int) (dest - source);
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| 			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
| 
| 		if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| 			YY_FATAL_ERROR( "flex scanner push-back overflow" );
| 		}
| 
| 	*--yy_cp = (char) c;
| 
| 	(yytext_ptr) = yy_bp;
| 	(yy_hold_char) = *yy_cp;
| 	(yy_c_buf_p) = yy_cp;
| }
| 
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
|     static int yyinput (void)
| #else
|     static int input  (void)
| #endif
| 
| {
| 	int c;
|     
| 	*(yy_c_buf_p) = (yy_hold_char);
| 
| 	if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| 		{
| 		/* yy_c_buf_p now points to the character we want to return.
| 		 * If this occurs *before* the EOB characters, then it's a
| 		 * valid NUL; if not, then we've hit the end of the buffer.
| 		 */
| 		if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| 			/* This was really a NUL. */
| 			*(yy_c_buf_p) = '\0';
| 
| 		else
| 			{ /* need more input */
| 			int offset = (yy_c_buf_p) - (yytext_ptr);
| 			++(yy_c_buf_p);
| 
| 			switch ( yy_get_next_buffer(  ) )
| 				{
| 				case EOB_ACT_LAST_MATCH:
| 					/* This happens because yy_g_n_b()
| 					 * sees that we've accumulated a
| 					 * token and flags that we need to
| 					 * try matching the token before
| 					 * proceeding.  But for input(),
| 					 * there's no matching to consider.
| 					 * So convert the EOB_ACT_LAST_MATCH
| 					 * to EOB_ACT_END_OF_FILE.
| 					 */
| 
| 					/* Reset buffer status. */
| 					yyrestart(yyin );
| 
| 					/*FALLTHROUGH*/
| 
| 				case EOB_ACT_END_OF_FILE:
| 					{
| 					if ( yywrap( ) )
| 						return EOF;
| 
| 					if ( ! (yy_did_buffer_switch_on_eof) )
| 						YY_NEW_FILE;
| #ifdef __cplusplus
| 					return yyinput();
| #else
| 					return input();
| #endif
| 					}
| 
| 				case EOB_ACT_CONTINUE_SCAN:
| 					(yy_c_buf_p) = (yytext_ptr) + offset;
| 					break;
| 				}
| 			}
| 		}
| 
| 	c = *(unsigned char *) (yy_c_buf_p);	/* cast for 8-bit char's */
| 	*(yy_c_buf_p) = '\0';	/* preserve yytext */
| 	(yy_hold_char) = *++(yy_c_buf_p);
| 
| 	return c;
| }
| #endif	/* ifndef YY_NO_INPUT */
| 
| /** Immediately switch to a different input stream.
|  * @param input_file A readable stream.
|  * 
|  * @note This function does not reset the start condition to @c INITIAL .
|  */
|     void yyrestart  (FILE * input_file )
| {
|     
| 	if ( ! YY_CURRENT_BUFFER ){
|         yyensure_buffer_stack ();
| 		YY_CURRENT_BUFFER_LVALUE =
|             yy_create_buffer(yyin,YY_BUF_SIZE );
| 	}
| 
| 	yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| 	yy_load_buffer_state( );
| }
| 
| /** Switch to a different input buffer.
|  * @param new_buffer The new input buffer.
|  * 
|  */
|     void yy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
| {
|     
| 	/* TODO. We should be able to replace this entire function body
| 	 * with
| 	 *		yypop_buffer_state();
| 	 *		yypush_buffer_state(new_buffer);
|      */
| 	yyensure_buffer_stack ();
| 	if ( YY_CURRENT_BUFFER == new_buffer )
| 		return;
| 
| 	if ( YY_CURRENT_BUFFER )
| 		{
| 		/* Flush out information for old buffer. */
| 		*(yy_c_buf_p) = (yy_hold_char);
| 		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| 		}
| 
| 	YY_CURRENT_BUFFER_LVALUE = new_buffer;
| 	yy_load_buffer_state( );
| 
| 	/* We don't actually know whether we did this switch during
| 	 * EOF (yywrap()) processing, but the only time this flag
| 	 * is looked at is after yywrap() is called, so it's safe
| 	 * to go ahead and always set it.
| 	 */
| 	(yy_did_buffer_switch_on_eof) = 1;
| }
| 
| static void yy_load_buffer_state  (void)
| {
|     	(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| 	(yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| 	yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| 	(yy_hold_char) = *(yy_c_buf_p);
| }
| 
| /** Allocate and initialize an input buffer state.
|  * @param file A readable stream.
|  * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
|  * 
|  * @return the allocated buffer state.
|  */
|     YY_BUFFER_STATE yy_create_buffer  (FILE * file, int  size )
| {
| 	YY_BUFFER_STATE b;
|     
| 	b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
| 	if ( ! b )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
| 
| 	b->yy_buf_size = size;
| 
| 	/* yy_ch_buf has to be 2 characters longer than the size given because
| 	 * we need to put in 2 end-of-buffer characters.
| 	 */
| 	b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2  );
| 	if ( ! b->yy_ch_buf )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
| 
| 	b->yy_is_our_buffer = 1;
| 
| 	yy_init_buffer(b,file );
| 
| 	return b;
| }
| 
| /** Destroy the buffer.
|  * @param b a buffer created with yy_create_buffer()
|  * 
|  */
|     void yy_delete_buffer (YY_BUFFER_STATE  b )
| {
|     
| 	if ( ! b )
| 		return;
| 
| 	if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| 		YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
| 
| 	if ( b->yy_is_our_buffer )
| 		yyfree((void *) b->yy_ch_buf  );
| 
| 	yyfree((void *) b  );
| }
| 
| #ifndef _UNISTD_H /* assume unistd.h has isatty() for us */
| #ifdef __cplusplus
| extern "C" {
| #endif
| #ifdef __THROW /* this is a gnuism */
| extern int isatty (int ) __THROW;
| #else
| extern int isatty (int );
| #endif
| #ifdef __cplusplus
| }
| #endif
| #endif
|     
| /* Initializes or reinitializes a buffer.
|  * This function is sometimes called more than once on the same buffer,
|  * such as during a yyrestart() or at EOF.
|  */
|     static void yy_init_buffer  (YY_BUFFER_STATE  b, FILE * file )
| 
| {
| 	int oerrno = errno;
|     
| 	yy_flush_buffer(b );
| 
| 	b->yy_input_file = file;
| 	b->yy_fill_buffer = 1;
| 
|     /* If b is the current buffer, then yy_init_buffer was _probably_
|      * called from yyrestart() or through yy_get_next_buffer.
|      * In that case, we don't want to reset the lineno or column.
|      */
|     if (b != YY_CURRENT_BUFFER){
|         b->yy_bs_lineno = 1;
|         b->yy_bs_column = 0;
|     }
| 
|         b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|     
| 	errno = oerrno;
| }
| 
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
|  * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
|  * 
|  */
|     void yy_flush_buffer (YY_BUFFER_STATE  b )
| {
|     	if ( ! b )
| 		return;
| 
| 	b->yy_n_chars = 0;
| 
| 	/* We always need two end-of-buffer characters.  The first causes
| 	 * a transition to the end-of-buffer state.  The second causes
| 	 * a jam in that state.
| 	 */
| 	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| 	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
| 
| 	b->yy_buf_pos = &b->yy_ch_buf[0];
| 
| 	b->yy_at_bol = 1;
| 	b->yy_buffer_status = YY_BUFFER_NEW;
| 
| 	if ( b == YY_CURRENT_BUFFER )
| 		yy_load_buffer_state( );
| }
| 
| /** Pushes the new state onto the stack. The new state becomes
|  *  the current state. This function will allocate the stack
|  *  if necessary.
|  *  @param new_buffer The new state.
|  *  
|  */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
|     	if (new_buffer == NULL)
| 		return;
| 
| 	yyensure_buffer_stack();
| 
| 	/* This block is copied from yy_switch_to_buffer. */
| 	if ( YY_CURRENT_BUFFER )
| 		{
| 		/* Flush out information for old buffer. */
| 		*(yy_c_buf_p) = (yy_hold_char);
| 		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| 		}
| 
| 	/* Only push if top exists. Otherwise, replace top. */
| 	if (YY_CURRENT_BUFFER)
| 		(yy_buffer_stack_top)++;
| 	YY_CURRENT_BUFFER_LVALUE = new_buffer;
| 
| 	/* copied from yy_switch_to_buffer. */
| 	yy_load_buffer_state( );
| 	(yy_did_buffer_switch_on_eof) = 1;
| }
| 
| /** Removes and deletes the top of the stack, if present.
|  *  The next element becomes the new top.
|  *  
|  */
| void yypop_buffer_state (void)
| {
|     	if (!YY_CURRENT_BUFFER)
| 		return;
| 
| 	yy_delete_buffer(YY_CURRENT_BUFFER );
| 	YY_CURRENT_BUFFER_LVALUE = NULL;
| 	if ((yy_buffer_stack_top) > 0)
| 		--(yy_buffer_stack_top);
| 
| 	if (YY_CURRENT_BUFFER) {
| 		yy_load_buffer_state( );
| 		(yy_did_buffer_switch_on_eof) = 1;
| 	}
| }
| 
| /* Allocates the stack if it does not exist.
|  *  Guarantees space for at least one push.
|  */
| static void yyensure_buffer_stack (void)
| {
| 	int num_to_alloc;
|     
| 	if (!(yy_buffer_stack)) {
| 
| 		/* First allocation is just for 2 elements, since we don't know if this
| 		 * scanner will even need a stack. We use 2 instead of 1 to avoid an
| 		 * immediate realloc on the next call.
|          */
| 		num_to_alloc = 1;
| 		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| 								(num_to_alloc * sizeof(struct yy_buffer_state*)
| 								);
| 		if ( ! (yy_buffer_stack) )
| 			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
| 								  
| 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
| 				
| 		(yy_buffer_stack_max) = num_to_alloc;
| 		(yy_buffer_stack_top) = 0;
| 		return;
| 	}
| 
| 	if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
| 
| 		/* Increase the buffer to prepare for a possible push. */
| 		int grow_size = 8 /* arbitrary grow size */;
| 
| 		num_to_alloc = (yy_buffer_stack_max) + grow_size;
| 		(yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| 								((yy_buffer_stack),
| 								num_to_alloc * sizeof(struct yy_buffer_state*)
| 								);
| 		if ( ! (yy_buffer_stack) )
| 			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
| 
| 		/* zero only the new slots.*/
| 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| 		(yy_buffer_stack_max) = num_to_alloc;
| 	}
| }
| 
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
|  * @param base the character buffer
|  * @param size the size in bytes of the character buffer
|  * 
|  * @return the newly allocated buffer state object. 
|  */
| YY_BUFFER_STATE yy_scan_buffer  (char * base, yy_size_t  size )
| {
| 	YY_BUFFER_STATE b;
|     
| 	if ( size < 2 ||
| 	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
| 	     base[size-1] != YY_END_OF_BUFFER_CHAR )
| 		/* They forgot to leave room for the EOB's. */
| 		return 0;
| 
| 	b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
| 	if ( ! b )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
| 
| 	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
| 	b->yy_buf_pos = b->yy_ch_buf = base;
| 	b->yy_is_our_buffer = 0;
| 	b->yy_input_file = 0;
| 	b->yy_n_chars = b->yy_buf_size;
| 	b->yy_is_interactive = 0;
| 	b->yy_at_bol = 1;
| 	b->yy_fill_buffer = 0;
| 	b->yy_buffer_status = YY_BUFFER_NEW;
| 
| 	yy_switch_to_buffer(b  );
| 
| 	return b;
| }
| 
| /** Setup the input buffer state to scan a string. The next call to yylex() will
|  * scan from a @e copy of @a str.
|  * @param yystr a NUL-terminated string to scan
|  * 
|  * @return the newly allocated buffer state object.
|  * @note If you want to scan bytes that may contain NUL values, then use
|  *       yy_scan_bytes() instead.
|  */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|     
| 	return yy_scan_bytes(yystr,strlen(yystr) );
| }
| 
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
|  * scan from a @e copy of @a bytes.
|  * @param bytes the byte buffer to scan
|  * @param len the number of bytes in the buffer pointed to by @a bytes.
|  * 
|  * @return the newly allocated buffer state object.
|  */
| YY_BUFFER_STATE yy_scan_bytes  (yyconst char * yybytes, int  _yybytes_len )
| {
| 	YY_BUFFER_STATE b;
| 	char *buf;
| 	yy_size_t n;
| 	int i;
|     
| 	/* Get memory for full buffer, including space for trailing EOB's. */
| 	n = _yybytes_len + 2;
| 	buf = (char *) yyalloc(n  );
| 	if ( ! buf )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
| 
| 	for ( i = 0; i < _yybytes_len; ++i )
| 		buf[i] = yybytes[i];
| 
| 	buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
| 
| 	b = yy_scan_buffer(buf,n );
| 	if ( ! b )
| 		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
| 
| 	/* It's okay to grow etc. this buffer, and we should throw it
| 	 * away when we're done.
| 	 */
| 	b->yy_is_our_buffer = 1;
| 
| 	return b;
| }
| 
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
| 
| static void yy_fatal_error (yyconst char* msg )
| {
|     	(void) fprintf( stderr, "%s\n", msg );
| 	exit( YY_EXIT_FAILURE );
| }
| 
| /* Redefine yyless() so it works in section 3 code. */
| 
| #undef yyless
| #define yyless(n) \
| 	do \
| 		{ \
| 		/* Undo effects of setting up yytext. */ \
|         int yyless_macro_arg = (n); \
|         YY_LESS_LINENO(yyless_macro_arg);\
| 		yytext[yyleng] = (yy_hold_char); \
| 		(yy_c_buf_p) = yytext + yyless_macro_arg; \
| 		(yy_hold_char) = *(yy_c_buf_p); \
| 		*(yy_c_buf_p) = '\0'; \
| 		yyleng = yyless_macro_arg; \
| 		} \
| 	while ( 0 )
| 
| /* Accessor  methods (get/set functions) to struct members. */
| 
| /** Get the current line number.
|  * 
|  */
| int yyget_lineno  (void)
| {
|         
|     return yylineno;
| }
| 
| /** Get the input stream.
|  * 
|  */
| FILE *yyget_in  (void)
| {
|         return yyin;
| }
| 
| /** Get the output stream.
|  * 
|  */
| FILE *yyget_out  (void)
| {
|         return yyout;
| }
| 
| /** Get the length of the current token.
|  * 
|  */
| int yyget_leng  (void)
| {
|         return yyleng;
| }
| 
| /** Get the current token.
|  * 
|  */
| 
| char *yyget_text  (void)
| {
|         return yytext;
| }
| 
| /** Set the current line number.
|  * @param line_number
|  * 
|  */
| void yyset_lineno (int  line_number )
| {
|     
|     yylineno = line_number;
| }
| 
| /** Set the input stream. This does not discard the current
|  * input buffer.
|  * @param in_str A readable stream.
|  * 
|  * @see yy_switch_to_buffer
|  */
| void yyset_in (FILE *  in_str )
| {
|         yyin = in_str ;
| }
| 
| void yyset_out (FILE *  out_str )
| {
|         yyout = out_str ;
| }
| 
| int yyget_debug  (void)
| {
|         return yy_flex_debug;
| }
| 
| void yyset_debug (int  bdebug )
| {
|         yy_flex_debug = bdebug ;
| }
| 
| static int yy_init_globals (void)
| {
|         /* Initialization is the same as for the non-reentrant scanner.
|      * This function is called from yylex_destroy(), so don't allocate here.
|      */
| 
|     (yy_buffer_stack) = 0;
|     (yy_buffer_stack_top) = 0;
|     (yy_buffer_stack_max) = 0;
|     (yy_c_buf_p) = (char *) 0;
|     (yy_init) = 0;
|     (yy_start) = 0;
| 
|     (yy_state_buf) = 0;
|     (yy_state_ptr) = 0;
|     (yy_full_match) = 0;
|     (yy_lp) = 0;
| 
| /* Defined in main.c */
| #ifdef YY_STDINIT
|     yyin = stdin;
|     yyout = stdout;
| #else
|     yyin = (FILE *) 0;
|     yyout = (FILE *) 0;
| #endif
| 
|     /* For future reference: Set errno on error, since we are called by
|      * yylex_init()
|      */
|     return 0;
| }
| 
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy  (void)
| {
|     
|     /* Pop the buffer stack, destroying each element. */
| 	while(YY_CURRENT_BUFFER){
| 		yy_delete_buffer(YY_CURRENT_BUFFER  );
| 		YY_CURRENT_BUFFER_LVALUE = NULL;
| 		yypop_buffer_state();
| 	}
| 
| 	/* Destroy the stack itself. */
| 	yyfree((yy_buffer_stack) );
| 	(yy_buffer_stack) = NULL;
| 
|     yyfree ( (yy_state_buf) );
|     (yy_state_buf)  = NULL;
| 
|     /* Reset the globals. This is important in a non-reentrant scanner so the next time
|      * yylex() is called, initialization will occur. */
|     yy_init_globals( );
| 
|     return 0;
| }
| 
| /*
|  * Internal utility routines.
|  */
| 
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| 	register int i;
| 	for ( i = 0; i < n; ++i )
| 		s1[i] = s2[i];
| }
| #endif
| 
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| 	register int n;
| 	for ( n = 0; s[n]; ++n )
| 		;
| 
| 	return n;
| }
| #endif
| 
| void *yyalloc (yy_size_t  size )
| {
| 	return (void *) malloc( size );
| }
| 
| void *yyrealloc  (void * ptr, yy_size_t  size )
| {
| 	/* The cast to (char *) in the following accommodates both
| 	 * implementations that use char* generic pointers, and those
| 	 * that use void* generic pointers.  It works with the latter
| 	 * because both ANSI C and C++ allow castless assignment from
| 	 * any pointer type to void*, and deal with argument conversions
| 	 * as though doing an assignment.
| 	 */
| 	return (void *) realloc( (char *) ptr, size );
| }
| 
| void yyfree (void * ptr )
| {
| 	free( (char *) ptr );	/* see yyrealloc() for (char *) cast */
| }
| 
| #define YYTABLES_NAME "yytables"
| 
| #line 9 "conftest.l"
| 
| 
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
|   return ! yylex () + ! yywrap ();
| }
configure:11124: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c -lfl  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
lex.yy.c: In function 'yylex':
conftest.l:2: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
conftest.l:9: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
configure:11124: $? = 0
configure:11134: result: -lfl
configure:11140: checking whether yytext is a pointer
configure:11156: x86_64-pc-linux-gnu-gcc -o conftest -march=native -pipe -O2 -s -fomit-frame-pointer -nopie  -Wl,-O1 conftest.c -lfl  >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
lex.yy.c: In function 'yylex':
conftest.l:2: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
conftest.l:9: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
configure:11156: $? = 0
configure:11164: result: yes
configure:11179: checking for flex
configure:11197: found /usr/bin/flex
configure:11209: result: /usr/bin/flex
configure:11223: checking for pod2man
configure:11241: found /usr/bin/pod2man
configure:11253: result: /usr/bin/pod2man
configure:11270: checking for pod2html
configure:11288: found /usr/bin/pod2html
configure:11300: result: /usr/bin/pod2html
configure:11324: checking for xdg-open
configure:11342: found /usr/bin/xdg-open
configure:11354: result: /usr/bin/xdg-open
configure:11441: checking for flex
configure:11459: found /usr/bin/flex
configure:11471: result: /usr/bin/flex
configure:11481: checking for python
configure:11499: found /usr/bin/python
configure:11511: result: /usr/bin/python
configure:11538: checking for doxygen
configure:11571: result: no
configure:11578: checking for doxygen
configure:11606: result: no
configure:11640: checking for x86_64-pc-linux-gnu-pkg-config
configure:11673: result: no
configure:11683: checking for pkg-config
configure:11701: found /usr/bin/pkg-config
configure:11713: result: /usr/bin/pkg-config
configure:11738: checking pkg-config is at least version 0.9.0
configure:11741: result: yes
configure:11752: checking for LIBGNUTLS
configure:11759: $PKG_CONFIG --exists --print-errors "gnutls >= 1.2.0"
configure:11762: $? = 0
configure:11775: $PKG_CONFIG --exists --print-errors "gnutls >= 1.2.0"
configure:11778: $? = 0
configure:11821: result: yes
configure:11861: checking for libgcrypt-config
configure:11879: found /usr/bin/libgcrypt-config
configure:11892: result: /usr/bin/libgcrypt-config
configure:11909: checking for LIBGCRYPT - version >= 1.1.92
configure:11943: result: yes
configure:12142: checking for xsltproc
configure:12160: found /usr/bin/xsltproc
configure:12172: result: /usr/bin/xsltproc
configure:12182: checking for xsltproc
configure:12198: found /usr/bin/xsltproc
configure:12210: result: yes
configure:12230: checking for xmllint
configure:12248: found /usr/bin/xmllint
configure:12260: result: /usr/bin/xmllint
configure:12270: checking for xmllint
configure:12286: found /usr/bin/xmllint
configure:12298: result: yes
configure:12318: checking for fop
configure:12351: result: no
configure:12358: checking for fop
configure:12386: result: no
configure:12406: checking for hhc.exe
configure:12439: result: no
configure:12446: checking for hhc.exe
configure:12474: result: no
configure:12498: checking for pkgproto
configure:12526: result: no
configure:12536: checking for pkgmk
configure:12564: result: no
configure:12574: checking for pkgtrans
configure:12602: result: no
configure:12623: checking for rpm
configure:12651: result: no
configure:12679: checking for dpkg-buildpackage
configure:12707: result: no
configure:12719: checking for xcodebuild
configure:12747: result: no
configure:12757: checking for hdiutil
configure:12785: result: no
configure:12795: checking for bless
configure:12823: result: no
configure:13207: checking whether we can add -Wall -W to CFLAGS
configure:13219: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13219: $? = 0
configure:13221: result: yes
configure:13238: checking whether we can add -Wdeclaration-after-statement to CFLAGS
configure:13250: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13250: $? = 0
configure:13252: result: yes
configure:13269: checking whether we can add -Wendif-labels to CFLAGS
configure:13281: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13281: $? = 0
configure:13283: result: yes
configure:13300: checking whether we can add -Wpointer-arith to CFLAGS
configure:13312: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13312: $? = 0
configure:13314: result: yes
configure:13331: checking whether we can add -Wno-pointer-sign to CFLAGS
configure:13343: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13343: $? = 0
configure:13345: result: yes
configure:13362: checking whether we can add -Warray-bounds to CFLAGS
configure:13374: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13374: $? = 0
configure:13376: result: yes
configure:13393: checking whether we can add -Wcast-align to CFLAGS
configure:13405: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wcast-align  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13405: $? = 0
configure:13407: result: yes
configure:13424: checking whether we can add -Wformat-security to CFLAGS
configure:13436: x86_64-pc-linux-gnu-gcc -c -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wcast-align -Wformat-security  conftest.c >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
configure:13436: $? = 0
configure:13438: result: yes
configure:13473: checking whether we should treat compiler warnings as errors
configure:13495: result: no
configure:13513: checking for platform-specific compiler flags
configure:13536: result: none needed
configure:13577: checking for platform-specific linker flags
configure:13611: result: none needed
configure:13689: checking whether to use /usr for headers and libraries
configure:13692: result: yes
configure:13725: checking whether to use /usr/local for headers and libraries
configure:13728: result: yes
configure:13786: checking for GNU sed as first sed in PATH
configure:13789: result: yes
configure:13864: checking if profile builds must be generated
configure:13868: result: yes
configure:13924: checking for pkg-config
configure:13955: result: /usr/bin/pkg-config
configure:13977: checking for GTK+ - version >= 2.4.0
configure:14087: x86_64-pc-linux-gnu-gcc -o conftest  -pg -D_U_="__attribute__((unused))" -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wcast-align -Wformat-security -I/usr/include -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12    -I/usr/include -I/usr/local/include -Wl,-O1 -L/usr/lib -L/usr/local/lib conftest.c -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0    >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: -pg and -fomit-frame-pointer are incompatible
configure:14087: $? = 1
configure: program exited with status 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_LIBGNUTLS 1
| #define HAVE_LIBGCRYPT 1
| #define DATAFILE_DIR "/usr/share/wireshark"
| /* end confdefs.h.  */
| 
| #include <gtk/gtk.h>
| #include <stdio.h>
| #include <stdlib.h>
| 
| int
| main ()
| {
|   int major, minor, micro;
|   char *tmp_version;
| 
|   system ("touch conf.gtktest");
| 
|   /* HP/UX 9 (%@#!) writes to sscanf strings */
|   tmp_version = g_strdup("2.4.0");
|   if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
|      printf("%s, bad version string\n", "2.4.0");
|      exit(1);
|    }
| 
|   if ((gtk_major_version != 2) ||
|       (gtk_minor_version != 18) ||
|       (gtk_micro_version != 9))
|     {
|       printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
|              2, 18, 9,
|              gtk_major_version, gtk_minor_version, gtk_micro_version);
|       printf ("*** was found! If pkg-config was correct, then it is best\n");
|       printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
|       printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
|       printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
|       printf("*** required on your system.\n");
|       printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
|       printf("*** to point to the correct configuration files\n");
|     }
|   else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
| 	   (gtk_minor_version != GTK_MINOR_VERSION) ||
|            (gtk_micro_version != GTK_MICRO_VERSION))
|     {
|       printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
| 	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
|       printf("*** library (version %d.%d.%d)\n",
| 	     gtk_major_version, gtk_minor_version, gtk_micro_version);
|     }
|   else
|     {
|       if ((gtk_major_version > major) ||
|         ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
|         ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
|       {
|         return 0;
|        }
|      else
|       {
|         printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
|                gtk_major_version, gtk_minor_version, gtk_micro_version);
|         printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
| 	       major, minor, micro);
|         printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
|         printf("***\n");
|         printf("*** If you have already installed a sufficiently new version, this error\n");
|         printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
|         printf("*** being found. The easiest way to fix this is to remove the old version\n");
|         printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
|         printf("*** correct copy of pkg-config. (In this case, you will have to\n");
|         printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
|         printf("*** so that the correct libraries are found at run-time))\n");
|       }
|     }
|   return 1;
| }
| 
configure:14105: result: no
configure:14133: x86_64-pc-linux-gnu-gcc -o conftest  -pg -D_U_="__attribute__((unused))" -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wcast-align -Wformat-security -I/usr/include -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12    -I/usr/include -I/usr/local/include -Wl,-O1 -L/usr/lib -L/usr/local/lib conftest.c  -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0   >&5
x86_64-pc-linux-gnu-gcc: unrecognized option '-nopie'
x86_64-pc-linux-gnu-gcc: -pg and -fomit-frame-pointer are incompatible
configure:14133: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.2.6"
| #define PACKAGE_STRING "wireshark 1.2.6"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "wireshark"
| #define VERSION "1.2.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_LIBGNUTLS 1
| #define HAVE_LIBGCRYPT 1
| #define DATAFILE_DIR "/usr/share/wireshark"
| /* end confdefs.h.  */
| 
| #include <gtk/gtk.h>
| #include <stdio.h>
| 
| int
| main ()
| {
|  return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
|   ;
|   return 0;
| }
configure:14184: error: GTK+ 2.4 or later isn't available, so Wireshark can't be compiled

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=x86_64-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_enable_usr_local=yes
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=native -pipe -O2 -s -fomit-frame-pointer -nopie'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1
ac_cv_env_LIBGNUTLS_CFLAGS_set=
ac_cv_env_LIBGNUTLS_CFLAGS_value=
ac_cv_env_LIBGNUTLS_LIBS_set=
ac_cv_env_LIBGNUTLS_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x86_64-pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-pc-linux-gnu
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_dlopen=no
ac_cv_func_shl_load=no
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=x86_64-pc-linux-gnu
ac_cv_lib_dl_dlopen=yes
ac_cv_lib_dld_shl_load=no
ac_cv_lib_lex=-lfl
ac_cv_objext=o
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_FGREP='/bin/grep -F'
ac_cv_path_GREP=/bin/grep
ac_cv_path_HTML_VIEWER=/usr/bin/xdg-open
ac_cv_path_LEX=/usr/bin/flex
ac_cv_path_LEXDUMMY=/usr/bin/flex
ac_cv_path_LIBGCRYPT_CONFIG=/usr/bin/libgcrypt-config
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_PKG_CONFIG=/usr/bin/pkg-config
ac_cv_path_POD2HTML=/usr/bin/pod2html
ac_cv_path_POD2MAN=/usr/bin/pod2man
ac_cv_path_PYTHON=/usr/bin/python
ac_cv_path_SED=/bin/sed
ac_cv_path_XMLLINT=/usr/bin/xmllint
ac_cv_path_XSLTPROC=/usr/bin/xsltproc
ac_cv_path_YACCDUMMY=/usr/bin/bison
ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AR=x86_64-pc-linux-gnu-ar
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=x86_64-pc-linux-gnu-gcc
ac_cv_prog_CPP='x86_64-pc-linux-gnu-gcc -E'
ac_cv_prog_HAVE_BLESS=no
ac_cv_prog_HAVE_DOXYGEN=no
ac_cv_prog_HAVE_DPKG_BUILDPACKAGE=no
ac_cv_prog_HAVE_FOP=no
ac_cv_prog_HAVE_HDIUTIL=no
ac_cv_prog_HAVE_HHC=no
ac_cv_prog_HAVE_PKGMK=no
ac_cv_prog_HAVE_PKGPROTO=no
ac_cv_prog_HAVE_PKGTRANS=no
ac_cv_prog_HAVE_XCODEBUILD=no
ac_cv_prog_HAVE_XMLLINT=yes
ac_cv_prog_HAVE_XSLTPROC=yes
ac_cv_prog_LEX=flex
ac_cv_prog_OBJDUMP=x86_64-pc-linux-gnu-objdump
ac_cv_prog_RANLIB=x86_64-pc-linux-gnu-ranlib
ac_cv_prog_STRIP=x86_64-pc-linux-gnu-strip
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_cv_wireshark_have_rpm=no
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_x86_64_pc_linux_gnu_gcc_c_o=yes
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_make_set=yes
ac_cv_wireshark_have_rpm=no
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_prog_tar_ustar=gnutar
lt_cv_deplibs_check_method=pass_all
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=-ldl
lt_cv_dlopen_self=yes
lt_cv_dlopen_self_static=no
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/x86_64-pc-linux-gnu/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_gnu_ld=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/  {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"lib\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_max_cmd_len=1572864
pkg_cv_LIBGNUTLS_CFLAGS=' '
pkg_cv_LIBGNUTLS_LIBS='-lgnutls  '

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/missing --run aclocal-1.10'
ADNS_LIBS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/missing --run tar'
AR='x86_64-pc-linux-gnu-ar'
AUTOCONF='${SHELL} /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/missing --run autoconf'
AUTOHEADER='${SHELL} /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/missing --run autoheader'
AUTOMAKE='${SHELL} /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/missing --run automake-1.10'
AWK='gawk'
CC='x86_64-pc-linux-gnu-gcc'
CCDEPMODE='depmode=gcc3'
CC_FOR_BUILD='x86_64-pc-linux-gnu-gcc'
CFLAGS=' -pg -D_U_="__attribute__((unused))" -march=native -pipe -O2 -s -fomit-frame-pointer -nopie -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wcast-align -Wformat-security -I/usr/include -I/usr/local/include'
CPP='x86_64-pc-linux-gnu-gcc -E'
CPPFLAGS=' -I/usr/include -I/usr/local/include'
CYGPATH_W='echo'
C_ARES_LIBS=''
DEFS=''
DEPDIR='.deps'
DOXYGEN=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/grep -E'
ENABLE_STATIC=''
ENABLE_STATIC_FALSE=''
ENABLE_STATIC_TRUE=''
EXEEXT=''
FGREP='/bin/grep -F'
FLEX_PATH=''
FOP=''
FRAMEWORKS=''
GEOIP_LIBS=''
GETOPT_C=''
GETOPT_O=''
GLIB_CFLAGS=''
GLIB_GENMARSHAL=''
GLIB_LIBS=''
GLIB_MKENUMS=''
GOBJECT_QUERY=''
GREP='/bin/grep'
GTK_CFLAGS=''
GTK_LIBS=''
HAVE_BLESS='no'
HAVE_DOXYGEN='no'
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE='#'
HAVE_DPKG_BUILDPACKAGE='no'
HAVE_FOP='no'
HAVE_FOP_FALSE=''
HAVE_FOP_TRUE='#'
HAVE_HDIUTIL='no'
HAVE_HHC='no'
HAVE_HHC_FALSE=''
HAVE_HHC_TRUE='#'
HAVE_LIBLUA_FALSE=''
HAVE_LIBLUA_TRUE=''
HAVE_LIBPORTAUDIO_FALSE=''
HAVE_LIBPORTAUDIO_TRUE=''
HAVE_OSX_PACKAGING='no'
HAVE_PKGMK='no'
HAVE_PKGPROTO='no'
HAVE_PKGTRANS='no'
HAVE_PLUGINS_FALSE=''
HAVE_PLUGINS_TRUE=''
HAVE_RPM=''
HAVE_SVR4_PACKAGING='no'
HAVE_WARNINGS_AS_ERRORS_FALSE=''
HAVE_WARNINGS_AS_ERRORS_TRUE='#'
HAVE_XCODEBUILD='no'
HAVE_XMLLINT='yes'
HAVE_XMLLINT_FALSE='#'
HAVE_XMLLINT_TRUE=''
HAVE_XSLTPROC='yes'
HAVE_XSLTPROC_FALSE='#'
HAVE_XSLTPROC_TRUE=''
HHC=''
HTML_VIEWER='/usr/bin/xdg-open'
INET_ATON_C=''
INET_ATON_LO=''
INET_ATON_O=''
INET_NTOP_C=''
INET_NTOP_LO=''
INET_NTOP_O=''
INET_PTON_C=''
INET_PTON_LO=''
INET_PTON_O=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
KRB5_CONFIG=''
KRB5_LIBS=''
LD='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64'
LDFLAGS='-Wl,-O1 -L/usr/lib -L/usr/local/lib'
LDFLAGS_SHAREDLIB=''
LEX='/usr/bin/flex'
LEXDUMMY='/usr/bin/flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBCAP_LIBS=''
LIBGCRYPT_CFLAGS=''
LIBGCRYPT_CONFIG='/usr/bin/libgcrypt-config'
LIBGCRYPT_LIBS='-L/usr/lib64 -lgcrypt -lgpg-error'
LIBGNUTLS_CFLAGS=' '
LIBGNUTLS_LIBS='-lgnutls  '
LIBOBJS=''
LIBS=''
LIBSMI_CFLAGS=''
LIBSMI_LDFLAGS=''
LIBSMI_VERSION=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIBTOOL_DEPS='./ltmain.sh'
LIPO=''
LN_S='ln -s'
LTLIBOBJS=''
LUA_INCLUDES=''
LUA_LIBS=''
MAKEINFO='${SHELL} /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/missing --run makeinfo'
MKDIR_P='/bin/mkdir -p'
NM='/usr/bin/nm -B'
NMEDIT=''
NSL_LIBS=''
OBJDUMP='x86_64-pc-linux-gnu-objdump'
OBJEXT='o'
OTOOL64=''
OTOOL=''
PACKAGE='wireshark'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='wireshark'
PACKAGE_STRING='wireshark 1.2.6'
PACKAGE_TARNAME='wireshark'
PACKAGE_URL=''
PACKAGE_VERSION='1.2.6'
PATH_SEPARATOR=':'
PCAP_CONFIG=''
PCAP_LIBS=''
PCRE_LIBS=''
PERL='/usr/bin/perl'
PKG_CONFIG='/usr/bin/pkg-config'
PLUGIN_LIBS=''
POD2HTML='/usr/bin/pod2html'
POD2MAN='/usr/bin/pod2man'
PORTAUDIO_INCLUDES=''
PORTAUDIO_LIBS=''
PYTHON='/usr/bin/python'
RANLIB='x86_64-pc-linux-gnu-ranlib'
SED='/bin/sed'
SETUID_INSTALL_FALSE=''
SETUID_INSTALL_TRUE=''
SET_MAKE=''
SHELL='/bin/sh'
SOCKET_LIBS=''
SSL_LIBS=''
STRCASECMP_C=''
STRCASECMP_O=''
STRERROR_C=''
STRERROR_O=''
STRIP='x86_64-pc-linux-gnu-strip'
STRNCASECMP_C=''
STRNCASECMP_O=''
STRPTIME_C=''
STRPTIME_O=''
USE_PROFILE_BUILD_FALSE='#'
USE_PROFILE_BUILD_TRUE=''
USE_THREADS_FALSE='#'
USE_THREADS_TRUE=''
VERSION='1.2.6'
XMLLINT='/usr/bin/xmllint'
XSLTPROC='/usr/bin/xsltproc'
YACC='bison -y'
YACCDUMMY='/usr/bin/bison'
YFLAGS=''
ac_ct_CC=''
ac_ct_DUMPBIN=''
ac_cv_wireshark_have_rpm='no'
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='tar --format=ustar -chf - "$$tardir"'
am__untar='tar -xf -'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_alias='x86_64-pc-linux-gnu'
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='pc'
capinfos_bin=''
capinfos_man=''
datadir='/usr/share'
datarootdir='${prefix}/share'
dftest_bin=''
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dumpcap_bin=''
dumpcap_man=''
dvidir='${docdir}'
editcap_bin=''
editcap_man=''
exec_prefix='NONE'
host='x86_64-pc-linux-gnu'
host_alias='x86_64-pc-linux-gnu'
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='pc'
htmldir='${docdir}'
idl2wrs_bin=''
idl2wrs_man=''
includedir='${prefix}/include'
infodir='/usr/share/info'
install_sh='$(SHELL) /var/tmp/portage/net-analyzer/wireshark-1.2.6-r1/work/wireshark-1.2.6/install-sh'
libdir='/usr/lib64'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='/var/lib'
lt_ECHO='echo'
mandir='/usr/share/man'
mergecap_bin=''
mergecap_man=''
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
plugindir=''
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
randpkt_bin=''
rawshark_bin=''
rawshark_man=''
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='/etc/wireshark'
target_alias=''
text2pcap_bin=''
text2pcap_man=''
tshark_bin=''
tshark_man=''
wireshark_SUBDIRS=''
wireshark_bin=''
wireshark_man=''
wiresharkfilter_man=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "wireshark"
#define PACKAGE_TARNAME "wireshark"
#define PACKAGE_VERSION "1.2.6"
#define PACKAGE_STRING "wireshark 1.2.6"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define PACKAGE "wireshark"
#define VERSION "1.2.6"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define YYTEXT_POINTER 1
#define HAVE_XDG_OPEN 1
#define HTML_VIEWER "xdg-open"
#define HAVE_LIBGNUTLS 1
#define HAVE_LIBGCRYPT 1
#define DATAFILE_DIR "/usr/share/wireshark"

configure: exit 1