kernel dmesg without acpi

dmesg.incorrect (text/plain), 28.78 KB, created by Oleg Gawriloff on 2010-03-24 13:12:29 UTC

Linux version 2.6.32.9 (root@martin-cl2) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Wed Mar 10 12:39:56 EET 2010
Command line: 
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
 BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000008c487000 (usable)
 BIOS-e820: 000000008c487000 - 000000008c557000 (ACPI NVS)
 BIOS-e820: 000000008c557000 - 000000008c647000 (ACPI data)
 BIOS-e820: 000000008c647000 - 000000008da47000 (ACPI NVS)
 BIOS-e820: 000000008da47000 - 000000008f602000 (ACPI data)
 BIOS-e820: 000000008f602000 - 000000008f64f000 (reserved)
 BIOS-e820: 000000008f64f000 - 000000008f6ea000 (ACPI data)
 BIOS-e820: 000000008f6ea000 - 000000008f6f3000 (ACPI NVS)
 BIOS-e820: 000000008f6f3000 - 000000008f6f6000 (ACPI data)
 BIOS-e820: 000000008f6f6000 - 000000008f7cf000 (ACPI NVS)
 BIOS-e820: 000000008f7cf000 - 000000008f800000 (ACPI data)
 BIOS-e820: 000000008f800000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000a0000000 - 00000000b0000000 (reserved)
 BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000270000000 (usable)
DMI 2.5 present.
last_pfn = 0x270000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFF0000000 write-back
  2 base 0100000000 mask FF00000000 write-back
  3 base 0200000000 mask FFC0000000 write-back
  4 base 0240000000 mask FFE0000000 write-back
  5 base 0260000000 mask FFF0000000 write-back
  6 base 00B0000000 mask FFFF000000 write-combining
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x8c487 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000008c487000
 0000000000 - 008c400000 page 2M
 008c400000 - 008c487000 page 4k
kernel direct mapping tables up to 8c487000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000270000000
 0100000000 - 0270000000 page 2M
kernel direct mapping tables up to 270000000 @ b000-16000
(7 early reservations) ==> bootmem [0000000000 - 0270000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0001941284]    TEXT DATA BSS ==> [0001000000 - 0001941284]
  #3 [000009a400 - 0000100000]    BIOS reserved ==> [000009a400 - 0000100000]
  #4 [0001942000 - 000194235c]              BRK ==> [0001942000 - 000194235c]
  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #6 [000000b000 - 0000011000]          PGTABLE ==> [000000b000 - 0000011000]
found SMP MP-table at [ffff8800000fdaa0] fdaa0
 [ffffea0000000000-ffffea00089fffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00270000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009a
    0: 0x00000100 -> 0x0008c487
    0: 0x00100000 -> 0x00270000
On node 0 totalpages: 2081825
  DMA zone: 56 pages used for memmap
  DMA zone: 113 pages reserved
  DMA zone: 3825 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 556223 pages, LIFO batch:31
  Normal zone: 20608 pages used for memmap
  Normal zone: 1486720 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: 86B     
MPTABLE: Product ID: THURLEY     
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #16
I/O APIC #9 Version 32 at 0xFEC90000.
I/O APIC #8 Version 32 at 0xFEC00000.
Processors: 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79448 r8192 d22952 u1048576
pcpu-alloc: s79448 r8192 d22952 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2046768
Kernel command line: 
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8121392k/10223616k available (5209k kernel code, 1896316k absent, 204988k reserved, 2804k data, 436k init)
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Using PIT calibration value
Detected 2266.508 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.01 BogoMIPS (lpj=22665080)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Freeing SMP alternatives: 40k freed
Setting APIC routing to flat
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=1 pin1=2 apic2=1 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 1 pin 0) ...
....... works.
CPU0: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz stepping 05
Booting processor 1 APIC 0x10 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
CPU1: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9066.33 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 1 0
NET: Registered protocol family 16
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xb1b45000-0xb1b45fff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xb1b20000-0xb1b23fff]
pci 0000:00:16.1: reg 10 64bit mmio: [0xb1b24000-0xb1b27fff]
pci 0000:00:16.2: reg 10 64bit mmio: [0xb1b28000-0xb1b2bfff]
pci 0000:00:16.3: reg 10 64bit mmio: [0xb1b2c000-0xb1b2ffff]
pci 0000:00:16.4: reg 10 64bit mmio: [0xb1b30000-0xb1b33fff]
pci 0000:00:16.5: reg 10 64bit mmio: [0xb1b34000-0xb1b37fff]
pci 0000:00:16.6: reg 10 64bit mmio: [0xb1b38000-0xb1b3bfff]
pci 0000:00:16.7: reg 10 64bit mmio: [0xb1b3c000-0xb1b3ffff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xb1b00000-0xb1b1ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xb1b44000-0xb1b44fff]
pci 0000:00:19.0: reg 18 io port: [0x2100-0x211f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x20e0-0x20ff]
pci 0000:00:1a.1: reg 20 io port: [0x20c0-0x20df]
pci 0000:00:1a.2: reg 20 io port: [0x20a0-0x20bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xb1b42000-0xb1b423ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f]
pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f]
pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xb1b41000-0xb1b413ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f)
pci 0000:00:1f.2: reg 10 io port: [0x2128-0x212f]
pci 0000:00:1f.2: reg 14 io port: [0x2134-0x2137]
pci 0000:00:1f.2: reg 18 io port: [0x2120-0x2127]
pci 0000:00:1f.2: reg 1c io port: [0x2130-0x2133]
pci 0000:00:1f.2: reg 20 io port: [0x2020-0x203f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xb1b40000-0xb1b407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xb1b43000-0xb1b430ff]
pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xb1a00000-0xb1a1ffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xb1900000-0xb19fffff]
pci 0000:01:00.0: reg 18 io port: [0x1000-0x101f]
pci 0000:01:00.0: reg 1c 32bit mmio: [0xb1a20000-0xb1a23fff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:01.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xb1900000-0xb1afffff]
pci 0000:06:00.0: reg 10 32bit mmio pref: [0xb0000000-0xb0ffffff]
pci 0000:06:00.0: reg 14 32bit mmio: [0xb1800000-0xb1803fff]
pci 0000:06:00.0: reg 18 32bit mmio: [0xb1000000-0xb17fffff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xb1000000-0xb18fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xb0000000-0xb0ffffff]
pci 0000:00:1e.0: transparent bridge
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3a16]
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff]
pci 0000:06:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x1000-0x1fff
pci 0000:00:01.0:   MEM window: 0xb1900000-0xb1afffff
pci 0000:00:01.0:   PREFETCH window: 0xb1c00000-0xb1cfffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0:   IO window: disabled
pci 0000:00:03.0:   MEM window: disabled
pci 0000:00:03.0:   PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0:   IO window: disabled
pci 0000:00:07.0:   MEM window: disabled
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:04
pci 0000:00:09.0:   IO window: disabled
pci 0000:00:09.0:   MEM window: disabled
pci 0000:00:09.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xb1d00000-0xb1efffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000b1f00000-0x000000b20fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4:   IO window: 0x4000-0x4fff
pci 0000:00:1c.4:   MEM window: 0xb1000000-0xb18fffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000b0000000-0x000000b0ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 4
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 0
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 6
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 8
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 40
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 40
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:01: resource 1 mem: [0xb1900000-0xb1afffff]
pci_bus 0000:01: resource 2 pref mem [0xb1c00000-0xb1cfffff]
pci_bus 0000:05: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:05: resource 1 mem: [0xb1d00000-0xb1efffff]
pci_bus 0000:05: resource 2 pref mem [0xb1f00000-0xb20fffff]
pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:06: resource 1 mem: [0xb1000000-0xb18fffff]
pci_bus 0000:06: resource 2 pref mem [0xb0000000-0xb0ffffff]
pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:06:00.0: Boot video device
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1269443463.477:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.13)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 15863
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:03.0: device [8086:340a] has invalid IRQ; check vendor BIOS
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 51 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 52 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 42
ahci 0000:00:1f.2: irq 54 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb1b40000 port 0xb1b40100 irq 54
ata2: SATA max UDMA/133 abar m2048@0xb1b40000 port 0xb1b40180 irq 54
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI->APIC IRQ transform: INT A -> IRQ 44
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:b4:b2:90
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 0101ff-0ff
e1000e 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 4
e1000e 0000:01:00.0: setting latency timer to 64
e1000e 0000:01:00.0: irq 56 for MSI/MSI-X
e1000e 0000:01:00.0: irq 57 for MSI/MSI-X
e1000e 0000:01:00.0: irq 58 for MSI/MSI-X
0000:01:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:15:17:b4:b2:91
0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1010ff-0ff
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
Intel(R) Virtual Function Network Driver - version 1.0.0-k0
Copyright (c) 2009 Intel Corporation.
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI->APIC IRQ transform: INT D -> IRQ 43
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: Enabling legacy PCI PM
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 43, io mem 0xb1b42000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT D -> IRQ 40
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: Enabling legacy PCI PM
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 40, io mem 0xb1b41000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT D -> IRQ 43
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 43, io base 0x000020e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT D -> IRQ 43
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 43, io base 0x000020c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI->APIC IRQ transform: INT D -> IRQ 43
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 43, io base 0x000020a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT D -> IRQ 40
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 40, io base 0x00002080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT D -> IRQ 40
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 40, io base 0x00002060
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT D -> IRQ 40
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 40, io base 0x00002040
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [e-mail]
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[e-mail]>
All bugs added by David S. Miller <[e-mail]>
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: GB0500C4413,     HPG3, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: ATA-7: GB0500C4413,     HPG3, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      GB0500C4413      n/a  PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      GB0500C4413      n/a  PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sdb1 sdb2 sdb3 sdb4 < sda1 sda2 sda3 sda4 < sdb5 sdb6 sda5 sdb7 >
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 10 and added 10 devices.
md: autorun ...
md: considering sda7 ...
md:  adding sda7 ...
md: sda6 has different UUID to sda7
md: sda5 has different UUID to sda7
md: sda3 has different UUID to sda7
md: sda1 has different UUID to sda7
md:  adding sdb7 ...
md: sdb6 has different UUID to sda7
md: sdb5 has different UUID to sda7
md: sdb3 has different UUID to sda7
md: sdb1 has different UUID to sda7
md: created md7
md: bind<sdb7>
md: bind<sda7>
md: running: <sda7><sdb7>
raid1: raid set md7 active with 2 out of 2 mirrors
md7: bitmap initialized from disk: read 14/14 pages, set 0 bits
created bitmap (217 pages) for device md7
md7: detected capacity change from 0 to 465213456384
md: considering sda6 ...
md:  adding sda6 ...
md: sda5 has different UUID to sda6
md: sda3 has different UUID to sda6
md: sda1 has different UUID to sda6
md:  adding sdb6 ...
md: sdb5 has different UUID to sda6
md: sdb3 has different UUID to sda6
md: sdb1 has different UUID to sda6
md: created md6
md: bind<sdb6>
md: bind<sda6>
md: running: <sda6><sdb6>
raid1: raid set md6 active with 2 out of 2 mirrors
md6: bitmap initialized from disk: read 8/8 pages, set 0 bits
created bitmap (123 pages) for device md6
md6: detected capacity change from 0 to 2056192000
md: considering sda5 ...
md:  adding sda5 ...
md: sda3 has different UUID to sda5
md: sda1 has different UUID to sda5
md:  adding sdb5 ...
md: sdb3 has different UUID to sda5
md: sdb1 has different UUID to sda5
md: created md5
md: bind<sdb5>
md: bind<sda5>
md: running: <sda5><sdb5>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 10/10 pages, set 40 bits
created bitmap (153 pages) for device md5
md5: detected capacity change from 0 to 20489043968
md: considering sda3 ...
md:  adding sda3 ...
md: sda1 has different UUID to sda3
md:  adding sdb3 ...
md: sdb1 has different UUID to sda3
md: created md3
md: bind<sdb3>
md: bind<sda3>
md: running: <sda3><sdb3>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 10/10 pages, set 20 bits
created bitmap (153 pages) for device md3
md3: detected capacity change from 0 to 10248585216
md: considering sda1 ...
md:  adding sda1 ...
md:  adding sdb1 ...
md: created md1
md: bind<sdb1>
md: bind<sda1>
md: running: <sda1><sdb1>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 1/1 pages, set 0 bits
created bitmap (5 pages) for device md1
md1: detected capacity change from 0 to 41025536
md: ... autorun DONE.
 md3: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 9:3.
Freeing unused kernel memory: 436k freed
Write protecting the kernel read-only data: 7276k
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input0
generic-usb 0003:0A81:0205.0001: input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-2/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input1
generic-usb 0003:0A81:0205.0002: input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-2/input1
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:046B:FF10.0003: input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:046B:FF10.0004: input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input1
udev: starting version 149
 md1:
 md6:
 md7:
 md5: unknown partition table
 unknown partition table
 unknown partition table
 unknown partition table
EXT3 FS on md3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md5, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
XFS mounting filesystem md7
Ending clean XFS mount for filesystem: md7
Adding 2008116k swap on /dev/sda2.  Priority:1 extents:1 across:2008116k 
Adding 2008116k swap on /dev/sdb2.  Priority:1 extents:1 across:2008116k