dmesg of failed boot

dmesg.txt (text/plain), 31.12 KB, created by mikopp on 2010-03-05 15:29:34 UTC

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-gentoo-r10 (root@KOMMA) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP Fri Feb 26 20:28:00 CET 2010
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cf6d3400 (usable)
 BIOS-e820: 00000000cf6d3400 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
 BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0xcf6d3 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FF0000000 write-back
  3 base 0CF800000 mask FFF800000 uncachable
  4 base 0CF700000 mask FFFF00000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 000000000009f000 (usable)
 modified: 000000000009f000 - 00000000000a0000 (reserved)
 modified: 0000000000100000 - 00000000cf6d3400 (usable)
 modified: 00000000cf6d3400 - 00000000d0000000 (reserved)
 modified: 00000000f0000000 - 00000000f4007000 (reserved)
 modified: 00000000f4008000 - 00000000f400c000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed20000 - 00000000feda0000 (reserved)
 modified: 00000000fee00000 - 00000000fee10000 (reserved)
 modified: 00000000ffb00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01c00000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
ACPI: RSDP 000fc1f0 00014 (v00 DELL  )
ACPI: RSDT cf6d3a0f 0003C (v01 DELL    M07     27D90106 ASL  00000061)
ACPI: FACP cf6d4800 00074 (v01 DELL    M07     27D90106 ASL  00000061)
ACPI: DSDT cf6d5400 049A3 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS cf6e3c00 00040
ACPI: HPET cf6d4f00 00038 (v01 DELL    M07     00000001 ASL  00000061)
ACPI: APIC cf6d5000 00068 (v01 DELL    M07     27D90106 ASL  00000047)
ACPI: MCFG cf6d4fc0 0003E (v16 DELL    M07     27D90106 ASL  00000061)
ACPI: SLIC cf6d509c 00176 (v01 DELL    M07     27D90106 ASL  00000061)
ACPI: SSDT cf6d3a4b 004DC (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
2430MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0001000000 - 0001770dac]    TEXT DATA BSS ==> [0001000000 - 0001770dac]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [0001771000 - 0001778188]              BRK ==> [0001771000 - 0001778188]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000cf6d3
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x000cf6d3
On node 0 totalpages: 849518
free_area_init_node: node 0, pgdat c1695600, node_mem_map c1779000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3963 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 4862 pages used for memmap
  HighMem zone: 617431 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c3179000, static data 23964 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842880
Kernel command line: root=/dev/sda4
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:000cf6d3)
Memory: 3361976k/3398476k available (5025k kernel code, 35184k reserved, 1743k data, 360k init, 2489172k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff6b000 - 0xfffff000   ( 592 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc169d000 - 0xc16f7000   ( 360 kB)
      .data : 0xc14e84a5 - 0xc169c2b8   (1743 kB)
      .text : 0xc1000000 - 0xc14e84a5   (5025 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:424
Fast TSC calibration using PIT
Detected 1828.541 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.08 BogoMIPS (lpj=7314164)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3657.53 BogoMIPS (lpj=7315068)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 3002862478 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (7314.61 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 2 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff]
pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xefd00000-0xefdfffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xefcfe000-0xefcfffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.4: reg 10 32bit mmio: [0xefcfd000-0xefcfdfff]
pci 0000:02:01.4: reg 14 32bit mmio: [0xefcfc800-0xefcfcfff]
pci 0000:02:01.4: supports D1 D2
pci 0000:02:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xefc00000-0xefcfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xcf6d33ff could not be reserved
system 00:00: iomem range 0xcf6d3400-0xcf6fffff has been reserved
system 00:00: iomem range 0xcf700000-0xcf7fffff has been reserved
system 00:00: iomem range 0xcf700000-0xcfefffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved
system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved
system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved
system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved
system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved
system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x1080-0x10bf has been reserved
system 00:03: ioport range 0x10c0-0x10df has been reserved
system 00:03: ioport range 0x809-0x809 has been reserved
system 00:08: ioport range 0xc80-0xcff could not be reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0x920-0x92f has been reserved
system 00:08: ioport range 0xcb0-0xcbf has been reserved
system 00:08: ioport range 0x930-0x97f has been reserved
system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xefd00000-0xefdfffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:01.0:   IO window: 0x002000-0x0020ff
pci 0000:02:01.0:   IO window: 0x002400-0x0024ff
pci 0000:02:01.0:   PREFETCH window: 0xe0000000-0xe3ffffff
pci 0000:02:01.0:   MEM window: 0xe4000000-0xe7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
pci 0000:00:1e.0:   MEM window: 0xefc00000-0xefcfffff
pci 0000:00:1e.0:   PREFETCH window: 0xe0000000-0xe3ffffff
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:0c: resource 1 mem: [0xefd00000-0xefdfffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xefc00000-0xefcfffff]
pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xe3ffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io:  [0x2000-0x20ff]
pci_bus 0000:03: resource 1 io:  [0x2400-0x24ff]
pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xe3ffffff]
pci_bus 0000:03: resource 3 mem: [0xe4000000-0xe7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x57
microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x57
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
Scanning for low memory corruption every 60 seconds
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.12)
msgmni has been set to 1706
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
acpi device:25: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input3
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/input/input4
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
ACPI: SSDT cf6d4172 00202 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT cf6d3f27 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT cf6d4374 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT cf6d40ed 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (49 C)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
Clocksource tsc unstable (delta = 1642274915 ns)
[drm] TV-16: set mode NTSC 480i 0
[drm] LVDS-8: set mode 1400x1050 19
Console: switching to colour frame buffer device 175x65
[drm] fb0: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
b44 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:b0:51:64
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
iwl3945 0000:0c:00.0: irq 26 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01d4]
yenta_cardbus 0000:02:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:02:01.0: O2: enabling read prefetch/write burst
ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B103, max UDMA/33
ata1.00: ATA-7: ST980813AS, 3.ADC, max UDMA/133
ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST980813AS       3.AD PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCC4244 B103 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:02:01.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xefc00000 - 0xefcfffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-gentoo-r10 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
  #0: HDA Intel at 0xefebc000 irq 21
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Using IPI No-Shortcut mode
usb 1-2: new high speed USB device using ehci_hcd and address 2
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
usb 1-2: New USB device found, idVendor=413c, idProduct=a005
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
EXT3-fs: sda4: couldn't mount because of unsupported optional features (240).
EXT4-fs (sda4): barriers enabled
kjournald2 starting: pid 930, dev sda4:8, commit interval 5 seconds
EXT4-fs (sda4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda4): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
Freeing unused kernel memory: 360k freed
usb 1-2.2: new full speed USB device using ehci_hcd and address 3
usb 1-2.2: New USB device found, idVendor=413c, idProduct=8103
usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.2: configuration #1 chosen from 1 choice
udev: starting version 149
EXT4-fs (sda4): Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.