Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31-gentoo-r10 (root@KOMMA) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP Fri Feb 26 20:28:00 CET 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf6d3400 (usable) BIOS-e820: 00000000cf6d3400 - 00000000d0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0xcf6d3 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 base 0CF800000 mask FFF800000 uncachable 4 base 0CF700000 mask FFFF00000 uncachable 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f000 (usable) modified: 000000000009f000 - 00000000000a0000 (reserved) modified: 0000000000100000 - 00000000cf6d3400 (usable) modified: 00000000cf6d3400 - 00000000d0000000 (reserved) modified: 00000000f0000000 - 00000000f4007000 (reserved) modified: 00000000f4008000 - 00000000f400c000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed20000 - 00000000feda0000 (reserved) modified: 00000000fee00000 - 00000000fee10000 (reserved) modified: 00000000ffb00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01c00000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000fc1f0 00014 (v00 DELL ) ACPI: RSDT cf6d3a0f 0003C (v01 DELL M07 27D90106 ASL 00000061) ACPI: FACP cf6d4800 00074 (v01 DELL M07 27D90106 ASL 00000061) ACPI: DSDT cf6d5400 049A3 (v01 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS cf6e3c00 00040 ACPI: HPET cf6d4f00 00038 (v01 DELL M07 00000001 ASL 00000061) ACPI: APIC cf6d5000 00068 (v01 DELL M07 27D90106 ASL 00000047) ACPI: MCFG cf6d4fc0 0003E (v16 DELL M07 27D90106 ASL 00000061) ACPI: SLIC cf6d509c 00176 (v01 DELL M07 27D90106 ASL 00000061) ACPI: SSDT cf6d3a4b 004DC (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 2430MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 0001770dac] TEXT DATA BSS ==> [0001000000 - 0001770dac] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0001771000 - 0001778188] BRK ==> [0001771000 - 0001778188] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000cf6d3 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x000cf6d3 On node 0 totalpages: 849518 free_area_init_node: node 0, pgdat c1695600, node_mem_map c1779000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4862 pages used for memmap HighMem zone: 617431 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at d0000000 (gap: d0000000:20000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c3179000, static data 23964 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 842880 Kernel command line: root=/dev/sda4 PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:000cf6d3) Memory: 3361976k/3398476k available (5025k kernel code, 35184k reserved, 1743k data, 360k init, 2489172k highmem) virtual kernel memory layout: fixmap : 0xfff6b000 - 0xfffff000 ( 592 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc169d000 - 0xc16f7000 ( 360 kB) .data : 0xc14e84a5 - 0xc169c2b8 (1743 kB) .text : 0xc1000000 - 0xc14e84a5 (5025 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:424 Fast TSC calibration using PIT Detected 1828.541 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.08 BogoMIPS (lpj=7314164) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.53 BogoMIPS (lpj=7315068) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 3002862478 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (7314.61 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: ACPI Dock Station Driver: 2 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff] pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:0c:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xefd00000-0xefdfffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xefcfe000-0xefcfffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.4: reg 10 32bit mmio: [0xefcfd000-0xefcfdfff] pci 0000:02:01.4: reg 14 32bit mmio: [0xefcfc800-0xefcfcfff] pci 0000:02:01.4: supports D1 D2 pci 0000:02:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xefc00000-0xefcfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xcf6d33ff could not be reserved system 00:00: iomem range 0xcf6d3400-0xcf6fffff has been reserved system 00:00: iomem range 0xcf700000-0xcf7fffff has been reserved system 00:00: iomem range 0xcf700000-0xcfefffff could not be reserved system 00:00: iomem range 0xffb00000-0xffffffff has been reserved system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xf400-0xf4fe has been reserved system 00:03: ioport range 0x1080-0x10bf has been reserved system 00:03: ioport range 0x10c0-0x10df has been reserved system 00:03: ioport range 0x809-0x809 has been reserved system 00:08: ioport range 0xc80-0xcff could not be reserved system 00:08: ioport range 0x910-0x91f has been reserved system 00:08: ioport range 0x920-0x92f has been reserved system 00:08: ioport range 0xcb0-0xcbf has been reserved system 00:08: ioport range 0x930-0x97f has been reserved system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xefd00000-0xefdfffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: 0x002000-0x0020ff pci 0000:02:01.0: IO window: 0x002400-0x0024ff pci 0000:02:01.0: PREFETCH window: 0xe0000000-0xe3ffffff pci 0000:02:01.0: MEM window: 0xe4000000-0xe7ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xefc00000-0xefcfffff pci 0000:00:1e.0: PREFETCH window: 0xe0000000-0xe3ffffff alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: enabling device (0000 -> 0003) alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:0c: resource 1 mem: [0xefd00000-0xefdfffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xefc00000-0xefcfffff] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xe3ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x2000-0x20ff] pci_bus 0000:03: resource 1 io: [0x2400-0x24ff] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xe3ffffff] pci_bus 0000:03: resource 3 mem: [0xe4000000-0xe7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x57 microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x57 Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.29 [Flags: R/O]. fuse init (API version 7.12) msgmni has been set to 1706 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 Non-volatile memory driver v1.3 intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ACPI: AC Adapter [AC] (off-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] acpi device:25: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/input/input4 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: SSDT cf6d4172 00202 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT cf6d3f27 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT cf6d4374 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT cf6d40ed 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (49 C) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) Clocksource tsc unstable (delta = 1642274915 ns) [drm] TV-16: set mode NTSC 480i 0 [drm] LVDS-8: set mode 1400x1050 19 Console: switching to colour frame buffer device 175x65 [drm] fb0: inteldrmfb frame buffer device [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 b44 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:b0:51:64 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2009 Intel Corporation iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:0c:00.0: setting latency timer to 64 iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 iwl3945 0000:0c:00.0: irq 26 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-3945-rs' yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01d4] yenta_cardbus 0000:02:01.0: O2: res at 0x94/0xD4: 00/ea yenta_cardbus 0000:02:01.0: O2: enabling read prefetch/write burst ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B103, max UDMA/33 ata1.00: ATA-7: ST980813AS, 3.ADC, max UDMA/133 ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST980813AS 3.AD PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B103 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19 yenta_cardbus 0000:02:01.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xefc00000 - 0xefcfffff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-gentoo-r10 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31-gentoo-r10 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0xefebc000 irq 21 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' Using IPI No-Shortcut mode usb 1-2: new high speed USB device using ehci_hcd and address 2 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 usb 1-2: New USB device found, idVendor=413c, idProduct=a005 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected EXT3-fs: sda4: couldn't mount because of unsupported optional features (240). EXT4-fs (sda4): barriers enabled kjournald2 starting: pid 930, dev sda4:8, commit interval 5 seconds EXT4-fs (sda4): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda4): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:4. Freeing unused kernel memory: 360k freed usb 1-2.2: new full speed USB device using ehci_hcd and address 3 usb 1-2.2: New USB device found, idVendor=413c, idProduct=8103 usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-2.2: configuration #1 chosen from 1 choice udev: starting version 149 EXT4-fs (sda4): Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode.