with writeback data mode
EXT4-fs (dm-13): mounted filesystem with ordered data mode
EXT4-fs (dm-19): mounted filesystem with ordered data mode
EXT4-fs (dm-24): mounted filesystem with writeback data mode
Adding 4006188k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:4006188k 
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
it87: Found IT8716F chip at 0x290, revision 1
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
nvidia 0000:07:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:07:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.36  Fri Aug 14 17:35:21 PDT 2009
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 15.15 seconds (103.41 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
forcedeth 0000:00:08.0: PCI INT A disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 127818 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
usb 1-6: new high speed USB device using ehci_hcd and address 2
usb 1-6: New USB device found, idVendor=0402, idProduct=5661
usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6: Product: Audio Player
usb 1-6: Manufacturer: ALi Corp.
usb 1-6: SerialNumber: 00384000101410000181
usb 1-6: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access              Audio Player          PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 6:0:0:0: [sdc] 8076288 512-byte logical blocks: (4.13 GB/3.85 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 3b 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk
usb 1-6: USB disconnect, address 2
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 11.00 seconds (142.43 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 125375 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391699 pages)
PM: Allocated 1566796 kbytes in 11.00 seconds (142.43 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 122430 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391693 pages)
PM: Allocated 1566772 kbytes in 12.35 seconds (126.86 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 125028 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 12.87 seconds (121.73 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 127821 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009154)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 8.60 seconds (182.18 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 122729 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009154)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 2.20 seconds (712.17 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 114210 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.30 BogoMIPS (lpj=2009153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
EXT4-fs error (device dm-0): ext4_mb_generate_buddy: EXT4-fs: group 1: 1239 blocks in bitmap, 1220 in gd
Aborting journal on device dm-0-8.
EXT4-fs (dm-0): Remounting filesystem read-only
EXT4-fs (dm-0): delayed block allocation failed for inode 6299 at logical offset 0 with max blocks 1 with error -30

This should not happen!!  Data will be lost
EXT4-fs (dm-0): ext4_da_writepages: jbd2_start: 1024 pages, ino 6299; err -30