dmesg from boot to bluetooth failure

dmesg.txt (text/plain), 30.22 KB, created by paolo muratore-ginanneschi on 2010-01-21 14:20:15 UTC

pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6ad9f00-0xf6ad9fff]
pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
pci 0000:02:01.0: reg 10 32bit mmio: [0xf65ff800-0xf65fffff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10 32bit mmio: [0xf65ff600-0xf65ff6ff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:02:01.2: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff]
pci 0000:02:01.2: supports D1 D2
pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0b: ioport range 0xcb0-0xcbb has been reserved
system 00:0b: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0c: ioport range 0x900-0x92f has been reserved
system 00:0c: ioport range 0x931-0x933 has been reserved
system 00:0c: ioport range 0x935-0x97f has been reserved
system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x1000-0x1005 has been reserved
system 00:0c: ioport range 0x1008-0x100f has been reserved
system 00:0d: ioport range 0xf400-0xf4fe has been reserved
system 00:0d: ioport range 0x1006-0x1007 has been reserved
system 00:0d: ioport range 0x100a-0x1059 could not be reserved
system 00:0d: ioport range 0x1060-0x107f has been reserved
system 00:0d: ioport range 0x1080-0x10bf has been reserved
system 00:0d: ioport range 0x1100-0x111f has been reserved
system 00:0d: ioport range 0x1010-0x102f has been reserved
system 00:0d: ioport range 0x809-0x809 has been reserved
system 00:0e: iomem range 0x0-0x9efff could not be reserved
system 00:0e: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xd7fff has been reserved
system 00:0e: iomem range 0xe0000-0xfffff has been reserved
system 00:0e: iomem range 0x100000-0xdd04d3ff could not be reserved
system 00:0e: iomem range 0xdd04d400-0xddafffff could not be reserved
system 00:0e: iomem range 0xddb00000-0xddbfffff has been reserved
system 00:0e: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:0e: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0e: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0e: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0e: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0e: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0e: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0e: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0e: iomem range 0xfed1c800-0xfed1cfff has been reserved
system 00:0e: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xf6900000-0xf69fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
pci 0000:00:1c.3:   MEM window: 0xf6600000-0xf68fffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf6500000-0xf65fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
pci_bus 0000:0d: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:0d: resource 1 mem: [0xf6600000-0xf68fffff]
pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff]
pci_bus 0000:02: resource 1 mem: [0xf6500000-0xf65fffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x79 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1264083096.780:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 7698
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[drm] MTRR allocation failed.  Graphics performance may suffer.
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
[drm] TV-25: set mode NTSC 480i 0
[drm] DAC-6: set mode 1280x1024 c
[drm] LVDS-8: set mode 1280x800 32
Console: switching to colour frame buffer device 160x50
ACPI: EC: missing confirmations, switch off interrupt mode.
[drm] fb0: inteldrmfb frame buffer device
acpi device:35: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input0
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3a/input/input1
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0xef88 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 28
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:ea:e3:5a
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 3002ff-0ff
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: setting latency timer to 64
iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:0c:00.0: irq 30 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
NET: Registered protocol family 17
NET: Registered protocol family 15
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1.00: ATA-8: ST9160411ASG, DE14, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9160411ASG     DE14 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input3
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input4
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D200, max UDMA/100, ATAPI AN
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-U633A D200 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 396k freed
udev: starting version 146
ACPI: SSDT 00000000dd05099d 00281 (v01  PmRef   BspIst 00003000 INTL 20050624)
ACPI: SSDT 00000000dd050df5 005C6 (v01  PmRef   BspCst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 00000000dd050c1e 001D7 (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000dd0513bb 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (55 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ACPI: Lid Switch [LID]
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
ACPI: Power Button [PBTN]
ACPI: Battery Slot [BAT1] (battery absent)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SBTN]
input: PC Speaker as /devices/platform/pcspkr/input/input8
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci1394 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[f65ff800-f65fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
ppdev: user-space parallel port driver
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
EXT3 FS on sda2, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [e-mail]
usb 1-6: new high speed USB device using ehci_hcd and address 6
Linux video capture interface: v2.00
I2O subsystem v1.325
i2o: max drivers = 8
I2O Block Device OSM v1.325
block-osm: registered device at major 80
I2O Configuration OSM v1.323
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[484fc0001f8c8890]
I2O ProcFS OSM v1.316
I2O SCSI Peripheral OSM v1.316
usb 1-6: configuration #1 chosen from 1 choice
NTFS driver 2.1.29 [Flags: R/O MODULE].
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63fe)
input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usbcore: registered new interface driver snd-usb-audio
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
platform microcode: firmware: requesting intel-ucode/06-17-06
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
platform microcode: firmware: requesting intel-ucode/06-17-06
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #0 chosen from 1 choice
usb 5-1: config 0 descriptor??
usb 1-4.2: new low speed USB device using ehci_hcd and address 7
usb 1-4.2: configuration #1 chosen from 1 choice
usb 3-1.1: new full speed USB device using uhci_hcd and address 3
usb 3-1.1: configuration #1 chosen from 1 choice
usb 3-1.2: new full speed USB device using uhci_hcd and address 4
usbcore: registered new interface driver hiddev
input: ATEN USB 2.0 Switch (2-port) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input10
generic-usb 0003:0557:2405.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN USB 2.0 Switch (2-port)] on usb-0000:00:1a.7-4.2/input0
generic-usb 0003:0557:2405.0002: hiddev96,hidraw1: USB HID v1.10 Device [ATEN USB 2.0 Switch (2-port)] on usb-0000:00:1a.7-4.2/input1
input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input11
generic-usb 0003:413C:8161.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 3-1.2: configuration #1 chosen from 1 choice
input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input12
generic-usb 0003:413C:8162.0004: input,hidraw3: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.2/input0
usb 3-1.3: new full speed USB device using uhci_hcd and address 5
usb 3-1.3: configuration #1 chosen from 1 choice
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4194296k swap on /dev/mapper/vg00-swap.  Priority:-1 extents:1 across:4194296k 
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
usb 3-1.2: usbfs: process 2063 (hid2hci) did not claim interface 0 before use
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Clocksource tsc unstable (delta = -138131074 ns)
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
eth0: no IPv6 routers present
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-4: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
wlan0: authenticate with AP 00:1d:e6:26:c9:c0
wlan0: authenticated
wlan0: associate with AP 00:1d:e6:26:c9:c0
wlan0: RX AssocResp from 00:1d:e6:26:c9:c0 (capab=0x421 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: FI
usb 1-3.3: new low speed USB device using ehci_hcd and address 8
usb 1-3.3: configuration #1 chosen from 1 choice
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.0/input/input13
generic-usb 0003:046D:C313.0005: input,hidraw3: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.7-3.3/input0
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.1/input/input14
generic-usb 0003:046D:C313.0006: input,hidraw4: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.7-3.3/input1
wlan0: no IPv6 routers present
usb 1-3.1: new low speed USB device using ehci_hcd and address 9
usb 1-3.1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input15
generic-usb 0003:046D:C045.0007: input,hidraw5: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-3.1/input0
pulseaudio[4418]: segfault at ffffffff0063dbe8 ip 00007f30828aff59 sp 00007fffaa442220 error 4 in libc-2.10.1.so[7f3082836000+16d000]