Build log

Devel-Size-Report-0.13:20100107-031706.log (text/plain), 7.82 KB, created by Diego Elio Pettenò (RETIRED) on 2010-01-07 11:01:02 UTC

 * CPV:  dev-perl/Devel-Size-Report-0.13
 * REPO: gentoo
 * USE:  elibc_glibc kernel_linux test userland_GNU x86
error(18) trying to perform operation
operation failed
>>> Unpacking source...
>>> Unpacking Devel-Size-Report-0.13.tar.gz to /var/tmp/portage/dev-perl/Devel-Size-Report-0.13/work
>>> Source unpacked in /var/tmp/portage/dev-perl/Devel-Size-Report-0.13/work
>>> Compiling source in /var/tmp/portage/dev-perl/Devel-Size-Report-0.13/work/Devel-Size-Report-0.13 ...
 * Using ExtUtils::MakeMaker
Cannot determine perl version info from lib/Devel/Size/Report.pm
Cannot determine license info from lib/Devel/Size/Report.pm
Checking if your kit is complete...
Looks good
Writing Makefile for Devel::Size::Report
make -j14 OTHERLDFLAGS=-Wl,-O1 
cp lib/Devel/Size/Report.pm blib/lib/Devel/Size/Report.pm
>>> Source compiled.
make -j14 test TEST_VERBOSE=1 
PERL_DL_NONLAZY=1 /usr/bin/perl5.10.1 "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t .... 
1..14
ok 1 - use Devel::Size::Report;
ok 2 - Devel::Size::Report->can(...)
# _flags:
# IS_WEAK   : 2048
# IS_RO     : 4096
# IS_DUAL   : 8192
ok 3
ok 4 - ref to 123
ok 5 - weakened ref
ok 6 - ref to 123
ok 7 - weakened ref
ok 8 - readonly scalar
not ok 9 - magical scalar # TODO Do not have a way to detect magic yet

#   Failed (TODO) test 'magical scalar'
#   at t/00_basic.t line 91.
#          got: '0'
#     expected: '16384'
ok 10 - Unknown element type
ok 11 - no spurious key added
ok 12 - Scalar element type
ok 13 - no spurious key added
ok 14 - Scalar type
ok
t/01_track.t .... 
1..27
ok 1 - level is 0
ok 2 - type S_SCALAR
ok 3 - size is ok
ok 4 - overhead for scalars is 0
ok 5 - not a key
ok 6 - level is 0
ok 7 - type S_SCALAR
ok 8 - size is ok
ok 9 - overhead for scalars is 0
ok 10 - not a key
ok 11 - level is 0
ok 12 - type S_SCALAR
ok 13 - size is ok
ok 14 - overhead for scalars is 0
ok 15 - not a key
ok 16 - 1 (1 scalar) elements
ok 17 - 2 (1 ref, 1 scalar) elements
ok 18 - ref to scalar is bigger than scalar alone
ok 19 - 4 (3 scalars + 1 array) elements
ok 20 - 8 (6 scalars + 2 arrays) elements
ok 21 - 8 (6 scalars + 2 hashes) elements
ok 22 - 8 (6 scalars + 1 array + 1 hash) elements
ok 23 - 9 (7 scalars + 1 array + 1 hash) elements
ok 24 - 2 (1 scalar + 1 array) elements
ok 25 - 2 (1 scalar + 1 hash) elements
ok 26 - 6 (4 scalar + 2 hash) elements
ok 27 - 6 (4 scalar + 2 hash) elements
ok
t/02_report.t ... 
1..43
ok 1 - old size agrees with total_size
ok 2 - still 44 bytes
ok 3 - size() agrees with total_size()
ok 4 - $x is still 44 bytes
ok 5 - size() agrees with total_size()
ok 6 - $v is still 44 bytes
ok 7 - size() agrees with total_size()
ok 8 - $x and $v are the same sizes
ok 9 - $x is still 44 bytes
ok 10 - size() agrees with total_size()
ok 11 - two same-sized scalars reports are the same 
ok 12 - $x is still 44 bytes
ok 13 - $v is still 44 bytes
ok 14 - size() agrees with total_size()
ok 15 - two different sized scalars reports are different
ok 16 - two same-sized scalars reports are equal
ok 17 - two different sized scalars reports are different
ok 18 - Scalar
ok 19 - Not read only
ok 20 - Read-Only Scalar
ok 21 - VString
ok 22 - RO VString
ok 23 - VString
ok 24 - no RO VString
ok 25 - VString
ok 26 - 1 elements
ok 27 - Hash
ok 28 - Hash key is present
ok 29 - Array
ok 30 - Scalar ref
ok 31 - Weak Scalar ref
ok 32 - But not RO
ok 33 - RO Scalar
ok 34 - RO Scalar
ok 35 - Array ref
ok 36 - Hash ref
ok 37 - Contains code
ok 38 - Contains code
Failed 5/43 subtests 
t/03_format.t ... 
1..16
ok 1 - No bytes text
ok 2 - report contains version
ok 3 - report contains total sum
ok 4 - report contains address
ok 5 - report contains 7 addresses
ok 6 - report contains 8 addresses
ok 7 - Contains addr
ok 8 - Contains (Foo)
ok 9 - Contains (Foo)
ok 10 - Contains (Bar)
ok 11 - Total: 4 elements
ok 12 - one Foo
ok 13 - one Bar
ok 14 - two Scalar
ok 15 - doesn't contain Foo
ok 16 - contains Total
ok
t/04_cycle.t .... 
1..18
ok 1 - Contains a cycle
ok 2 - Contains a cycle
ok 3 - Contains two cycles
ok 4 - no cycle
ok 5 - no cycle
ok 6 - double scalar ref e.g. two refs to the same scalar
ok 7 - no cycle or double
ok 8 - no cycle or double
ok 9 - no cycle or double
ok 10 - no cycle or double
ok 11 - no cycle or double
ok 12 - address found
ok 13 - right address found
ok 14 - circular ref to parent
ok 15 - no cycle
# 476 176 176
ok 16 - second and third array have same size
ok 17 - first array is biggest
ok 18 - first array is biggest
ok
t/05_address.t .. 
1..9
ok 1 - report contains address
ok 2 - contains 2 addresses
ok 3 - contains 2 different addresses
ok 4 - contains 3 addresses
ok 5 - contains 2 different addresses
ok 6 - contains 3 different addresses
ok 7 - contains 3 addresses
ok 8 - contains 2 different addresses
ok 9 - contains 3 different addresses
ok
t/06_error.t .... 
1..1
ok 1 - Need hash ref
ok
t/07_double.t ... 
1..4
ok 1 - dont see two doubles
ok 2 - seen two doubles
ok 3 - dont see two doubles
ok 4 - seen two doubles
ok
t/08_size.t ..... 
1..13
# array size: 116
# scalar size: 16
# array grow: 4
ok 1 - two empty arrays
ok 2 - two empty arrays, one scalar
ok 3 - two empty arrays, two scalars
ok 4 - two empty arrays, three scalars
ok 5 - two empty arrays, four scalars
ok 6 - two empty arrays, five scalars
ok 7 - one empty array
ok 8 - one array, plus one scalars (no double testing)
ok 9 - one array, plus one scalars (double testing)
ok 10 - one array, plus two scalars (no double testing)
ok 11 - one array, plus two scalars (double testing)
ok 12 - one array, plus two scalars (no double testing)
ok 13 - one array, plus two scalars (double testing)
ok
t/09_pod.t ...... 
1..1
ok 1 # skip Test::Pod not installed on this system
ok
t/10_pod_cov.t .. 
1..1
ok 1 # skip Test::Pod::Coverage 1.08 and Pod::Coverage 0.19 required for testing POD coverage
ok

Test Summary Report
-------------------
t/02_report.t (Wstat: 11 Tests: 38 Failed: 0)
  Non-zero wait status: 11
  Parse errors: Bad plan.  You planned 43 tests but ran 38.
Files=11, Tests=142,  1 wallclock secs ( 0.07 usr  0.03 sys +  0.46 cusr  0.09 csys =  0.65 CPU)
Result: FAIL
Failed 1/11 test programs. 0/142 subtests failed.
make: *** [test_dynamic] Error 255
 * ERROR: dev-perl/Devel-Size-Report-0.13 failed:
 *   test failed
 * 
 * Call stack:
 *     ebuild.sh, line   54:  Called src_test
 *   environment, line 2831:  Called perl-module_src_test
 *   environment, line 2611:  Called die
 * The specific snippet of code:
 *                   emake test TEST_VERBOSE=${TEST_VERBOSE:-0} || die "test failed";
 * 
 * If you need support, post the output of 'emerge --info =dev-perl/Devel-Size-Report-0.13',
 * the complete build log and the output of 'emerge -pqv =dev-perl/Devel-Size-Report-0.13'.
 * The complete build log is located at '/var/log/portage/build/dev-perl/Devel-Size-Report-0.13:20100107-031706.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-perl/Devel-Size-Report-0.13/temp/environment'.
 * S: '/var/tmp/portage/dev-perl/Devel-Size-Report-0.13/work/Devel-Size-Report-0.13'

>>> Install Devel-Size-Report-0.13 into /var/tmp/portage/dev-perl/Devel-Size-Report-0.13/image/ category dev-perl
make -j14 pure_install 
Installing /var/tmp/portage/dev-perl/Devel-Size-Report-0.13/image/usr/lib/perl5/vendor_perl/5.10.1/Devel/Size/Report.pm
>>> Completed installing Devel-Size-Report-0.13 into /var/tmp/portage/dev-perl/Devel-Size-Report-0.13/image/

 * checking 4 files for package collisions
 * Removing /usr/share/doc
 * Removing /usr/share/info
--- /usr/
--- /usr/share/
--- /usr/lib/
--- /usr/lib/perl5/
--- /usr/lib/perl5/vendor_perl/
--- /usr/lib/perl5/vendor_perl/5.10.1/
--- /usr/lib/perl5/vendor_perl/5.10.1/Devel/
>>> /usr/lib/perl5/vendor_perl/5.10.1/Devel/Size/
>>> /usr/lib/perl5/vendor_perl/5.10.1/Devel/Size/Report.pm
>>> Safely unmerging already-installed instance...
>>> Original instance of package unmerged safely.
Merge of dev-perl/Devel-Size-Report-0.13 at 2010-01-07T03:17:06+00:00
failed