Linux version 2.6.32 (root@vrapenec) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #2 Sun Dec 13 12:22:36 CET 2009 KERNEL supported cpus: Intel GenuineIntel BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff9000 (usable) BIOS-e820: 000000007fff9000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x7fff9 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-AFFFF uncachable B0000-BFFFF write-combining C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0E0000000 mask FF0000000 write-combining 2 base 0D8000000 mask FF8000000 write-combining 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f6890 00014 (v00 ASUS ) ACPI: RSDT 7fff9000 0002C (v01 ASUS P4_L3CS 42302E31 MSFT 31313031) ACPI: FACP 7fff9080 00074 (v01 ASUS P4_L3CS 42302E31 MSFT 31313031) ACPI: DSDT 7fff9100 052E9 (v01 ASUS P4_L3CS 00001000 MSFT 0100000D) ACPI: FACS 7ffff000 00040 ACPI: BOOT 7fff9040 00028 (v01 ASUS P4_L3CS 42302E31 MSFT 31313031) 1159MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (6 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001531dbc] TEXT DATA BSS ==> [0001000000 - 0001531dbc] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [0001532000 - 000153815c] BRK ==> [0001532000 - 000153815c] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007fff9 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fff9 On node 0 totalpages: 524184 free_area_init_node: node 0, pgdat c149c72c, node_mem_map c153a000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2320 pages used for memmap HighMem zone: 294635 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0xe408 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7fff0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520088 Kernel command line: root=/dev/sda3 console=ttyS0,57600n8 console=tty0 radeon.modeset=0 nomodeset udev PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007fff9) Memory: 2073292k/2097124k available (3017k kernel code, 22568k reserved, 1717k data, 284k init, 1187820k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc14a0000 - 0xc14e7000 ( 284 kB) .data : 0xc12f2484 - 0xc149fbe8 (1717 kB) .text : 0xc1000000 - 0xc12f2484 (3017 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:16 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Fast TSC calibration using PIT Detected 1799.932 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.86 BogoMIPS (lpj=1799932) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K mce: CPU supports 4 MCE banks CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07 Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ACPI: setting ELCR to 0200 (from 0a28) regulator: core version 0.5 NET: Registered protocol family 16 i2c-core: driver [dummy] registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [PRCF] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:1f.0: Enabled i801 SMBus device pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x9800-0x9807] pci 0000:00:1f.1: reg 14 io port: [0x9400-0x9403] pci 0000:00:1f.1: reg 18 io port: [0x9000-0x9007] pci 0000:00:1f.1: reg 1c io port: [0x8800-0x8803] pci 0000:00:1f.1: reg 20 io port: [0x8400-0x840f] pci 0000:00:1f.1: reg 24 32bit mmio: [0xd5800000-0xd58003ff] pci 0000:00:1f.3: reg 20 io port: [0xe800-0xe81f] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff] pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f] pci 0000:00:1f.6: reg 10 io port: [0xe200-0xe2ff] pci 0000:00:1f.6: reg 14 io port: [0xe300-0xe37f] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xd7000000-0xd700ffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd7fe0000-0xd7ffffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xd7000000-0xd7efffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xdfffffff] pci 0000:02:05.0: reg 10 io port: [0xa800-0xa8ff] pci 0000:02:05.0: reg 14 32bit mmio: [0xd6800000-0xd68000ff] pci 0000:02:05.0: supports D1 D2 pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:02:07.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:07.0: supports D1 D2 pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:07.0: PME# disabled pci 0000:02:07.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:07.1: supports D1 D2 pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:07.1: PME# disabled pci 0000:02:07.2: reg 10 32bit mmio: [0xd6000000-0xd60007ff] pci 0000:02:07.2: PME# supported from D0 D3hot D3cold pci 0000:02:07.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd6000000-0xd6ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5) ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11) *9 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. ACPI: WMI: Mapper loaded PCI: Using ACPI for IRQ routing Switching to clocksource tsc Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7fffffff could not be reserved system 00:02: ioport range 0xe400-0xe47f has been reserved system 00:02: ioport range 0xe800-0xe81f has been reserved system 00:02: ioport range 0xec00-0xec3f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x480-0x48f has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:03: iomem range 0xffa00000-0xffbfffff has been reserved system 00:03: iomem range 0xffe00000-0xffffffff could not be reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x77c-0x77f has been reserved system 00:0e: ioport range 0x610-0x62f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xd7000000-0xd7efffff pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xdfffffff pci 0000:02:07.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:07.0: IO window: 0x00a000-0x00a0ff pci 0000:02:07.0: IO window: 0x00a400-0x00a4ff pci 0000:02:07.0: PREFETCH window: 0x80000000-0x83ffffff pci 0000:02:07.0: MEM window: 0x88000000-0x8bffffff pci 0000:02:07.1: CardBus bridge, secondary bus 0000:07 pci 0000:02:07.1: IO window: 0x00ac00-0x00acff pci 0000:02:07.1: IO window: 0x001000-0x0010ff pci 0000:02:07.1: PREFETCH window: 0x84000000-0x87ffffff pci 0000:02:07.1: MEM window: 0x8c000000-0x8fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xa000-0xafff pci 0000:00:1e.0: MEM window: 0xd6000000-0xd6ffffff pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered pci 0000:02:07.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 pci 0000:02:07.1: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:07.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xd7000000-0xd7efffff] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] pci_bus 0000:02: resource 1 mem: [0xd6000000-0xd6ffffff] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x87ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0xa000-0xa0ff] pci_bus 0000:03: resource 1 io: [0xa400-0xa4ff] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff] pci_bus 0000:03: resource 3 mem: [0x88000000-0x8bffffff] pci_bus 0000:07: resource 0 io: [0xac00-0xacff] pci_bus 0000:07: resource 1 io: [0x1000-0x10ff] pci_bus 0000:07: resource 2 pref mem [0x84000000-0x87ffffff] pci_bus 0000:07: resource 3 mem: [0x8c000000-0x8fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Simple Boot Flag at 0x3a set to 0x1 microcode: CPU0 sig=0xf27, pf=0x8, revision=0x0 Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages DLM (built Dec 10 2009 10:42:29) installed squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.13) msgmni has been set to 1731 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for ghash (ghash-generic) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed pci-stub: invalid id string "" radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=230.00 Mhz, System=183.00 MHz radeonfb: PLL min 12000 max 35000 i2c i2c-0: adapter [radeonfb monid] registered i2c i2c-1: adapter [radeonfb dvi] registered i2c i2c-2: adapter [radeonfb vga] registered i2c i2c-3: adapter [radeonfb crt2] registered i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 i2c i2c-1: NAK from device addr 0x50 msg #0 i2c i2c-1: unable to read EDID block. i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 i2c i2c-1: NAK from device addr 0x50 msg #0 i2c i2c-1: unable to read EDID block. i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 i2c i2c-1: NAK from device addr 0x50 msg #0 i2c i2c-1: unable to read EDID block. i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 i2c i2c-3: master_xfer[1] R, addr=0x50, len=128 i2c i2c-3: NAK from device addr 0x50 msg #0 i2c i2c-3: unable to read EDID block. i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 i2c i2c-3: master_xfer[1] R, addr=0x50, len=128 i2c i2c-3: NAK from device addr 0x50 msg #0 i2c i2c-3: unable to read EDID block. i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 i2c i2c-3: master_xfer[1] R, addr=0x50, len=128 i2c i2c-3: NAK from device addr 0x50 msg #0 i2c i2c-3: unable to read EDID block. Non-DDC laptop panel detected i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 i2c i2c-2: master_xfer[1] R, addr=0x50, len=128 i2c i2c-2: NAK from device addr 0x50 msg #0 i2c i2c-2: unable to read EDID block. i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 i2c i2c-2: master_xfer[1] R, addr=0x50, len=128 i2c i2c-2: NAK from device addr 0x50 msg #0 i2c i2c-2: unable to read EDID block. i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 i2c i2c-2: master_xfer[1] R, addr=0x50, len=128 i2c i2c-2: NAK from device addr 0x50 msg #0 i2c i2c-2: unable to read EDID block. i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 i2c i2c-3: master_xfer[1] R, addr=0x50, len=128 i2c i2c-3: NAK from device addr 0x50 msg #0 i2c i2c-3: unable to read EDID block. i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 i2c i2c-3: master_xfer[1] R, addr=0x50, len=128 i2c i2c-3: NAK from device addr 0x50 msg #0 i2c i2c-3: unable to read EDID block. i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 i2c i2c-3: master_xfer[1] R, addr=0x50, len=128 i2c i2c-3: NAK from device addr 0x50 msg #0 i2c i2c-3: unable to read EDID block. radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: Samsung LTN150P1-L02 radeonfb: detected LVDS panel size from BIOS: 1400x1050 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 175x65 radeonfb (0000:01:00.0): ATI Radeon 4c57 "LW" ACPI: AC Adapter [ACAD] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LIDD] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [CFAN] (off) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input3 ACPI: Video Device [VGAC] (multi-head: yes rom: no post: no) Marking TSC unstable due to TSC halts in idle Switching to clocksource acpi_pm processor LNXCPU:00: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (55 C) ACPI: Battery Slot [BAT0] (battery present) lp: driver loaded but no devices found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 serial 0000:00:1f.6: PCI INT B disabled Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded nbd: registered device at major 43 ata_piix 0000:00:1f.1: version 2.13 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8400 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8408 irq 15 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky yenta_cardbus 0000:02:07.0: CardBus bridge found [1043:1624] ata2.01: ATAPI: Optiarc DVD RW AD-7590A, 1.05, max UDMA/33 ata2.01: configured for UDMA/33 ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100 ata1.00: 625142448 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-7590A 1.05 PQ: 0 ANSI: 5 sda1 sda2 sda3 sda4 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 sr 1:0:1:0: Attached scsi generic sg1 type 5 sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0490, PCI irq 5 yenta_cardbus 0000:02:07.0: Socket status: 30000820 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean. yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff yenta_cardbus 0000:02:07.1: CardBus bridge found [1043:1624] yenta_cardbus 0000:02:07.1: ISA IRQ mask 0x0490, PCI irq 11 yenta_cardbus 0000:02:07.1: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff: clean. yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input4 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0xe460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 cpuidle: using governor ladder Asus Laptop ACPI Extras version 0.30 pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] L3C model detected, supported Advanced Linux Sound Architecture Driver Version 1.0.21. Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 intel8x0_measure_ac97_clock: measured 50917 usecs (2448 samples) intel8x0: clocking to 48000 Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 ALSA device list: #0: Intel 82801CA-ICH3 with CS4299 at irq 11 #1: Intel 82801CA-ICH3 Modem at irq 11 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 SCTP: Hash tables configured (established 65536 bind 65536) rtc_cmos 00:06: setting system clock to 2010-01-03 12:36:21 UTC (1262522181) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 284k freed udev: starting version 149 cfg80211: Calling CRDA to update world regulatory domain parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). ath5k 0000:03:00.0: enabling device (0000 -> 0002) ath5k 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 ath5k 0000:03:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x80d0 ath: EEPROM indicates we should expect a country code ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x37 ath: Country alpha2 being used: DK ath: Regpair used: 0x37 phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61) cfg80211: Calling CRDA for country: DK agpgart-intel 0000:00:00.0: Intel 845G Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 ohci1394 0000:02:07.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[d6000000-d60007ff] Max Packet=[2048] IR/IT contexts=[4/4] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 8139too 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usbcore: registered new device driver usb eth0: RealTek RTL8139 at 0xf80d0000, 00:e0:18:b6:9d:31, IRQ 11 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000b800 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32 uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b400 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 usb 1-2: New USB device found, idVendor=0458, idProduct=0036 usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-2: Product: NetScroll + Mini Traveler usb 1-2: Manufacturer: Genius usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Genius NetScroll + Mini Traveler as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input7 generic-usb 0003:0458:0036.0001: input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:1d.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000305e5fc] EXT3 FS on sda3, internal journal Adding 2763172k swap on /dev/sda4. Priority:-1 extents:1 across:2763172k wlan0: direct probe to AP 00:21:63:9b:c0:12 (try 1) wlan0: deauthenticating from 00:21:63:9b:c0:12 by local choice (reason=3) wlan0: direct probe to AP 00:21:63:9b:c0:12 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:21:63:9b:c0:12 (try 1) wlan0: authenticated wlan0: associate with AP 00:21:63:9b:c0:12 (try 1) wlan0: RX AssocResp from 00:21:63:9b:c0:12 (capab=0x411 status=0 aid=1) wlan0: associated i2c /dev entries driver i2c-core: driver [dev_driver] registered i2c-dev: adapter [radeonfb monid] registered as minor 0 i2c-dev: adapter [radeonfb dvi] registered as minor 1 i2c-dev: adapter [radeonfb vga] registered as minor 2 i2c-dev: adapter [radeonfb crt2] registered as minor 3 microcode: CPU0 updated to revision 0x39, date = 2003-06-04 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R100 Microcode platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin [drm] writeback test succeeded in 1 usecs