X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.28-tuxonice-r10 x86_64 Current Operating System: Linux mntnoe-laptop 2.6.28-tuxonice-r10 #5 SMP Fri Nov 13 21:21:10 CET 2009 x86_64 Build Date: 12 December 2009 04:41:51PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 2 15:56:08 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) Option "BlankTime" "0" (**) Option "StandbyTime" "0" (**) Option "SuspendTime" "30" (**) Option "OffTime" "60" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ (==) ModulePath set to "/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0xd20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 nVidia Corporation Quadro NVS 140M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (WW) Warning, couldn't open module dri (II) UnloadModule: "dri" (EE) Failed to load module "dri" (module does not exist, 0) (II) LoadModule: "dri2" (WW) Warning, couldn't open module dri2 (II) UnloadModule: "dri2" (EE) Failed to load module "dri2" (module does not exist, 0) (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules//libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "NoLogo" "True" (**) NVIDIA(0): Option "TwinView" "1" (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1680+0, DFP: nvidia-auto-select +0+0" (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0" (**) NVIDIA(0): Option "UseEdidDpi" "False" (**) NVIDIA(0): Option "DPI" "96 x 96" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 60.86.3e.00.00 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0: (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (--) NVIDIA(0): IBM (DFP-0) (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) NVIDIA(0): IBM (DFP-0): 330.0 MHz maximum pixel clock (--) NVIDIA(0): IBM (DFP-0): Internal Dual Link LVDS (**) NVIDIA(0): TwinView enabled (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-0 (WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050" (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid (WW) NVIDIA(0): HorizSync range (53.246-63.877 kHz) would exclude this (WW) NVIDIA(0): mode's HorizSync (42.6 kHz); ignoring HorizSync check for (WW) NVIDIA(0): mode "1680x1050". (WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050" (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid (WW) NVIDIA(0): HorizSync range (53.246-63.877 kHz) would exclude this (WW) NVIDIA(0): mode's HorizSync (42.6 kHz); ignoring HorizSync check for (WW) NVIDIA(0): mode "1680x1050". (II) NVIDIA(0): Assigned Display Devices: CRT-0, DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): (II) NVIDIA(0): "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 3360 x 1050 (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode (II) NVIDIA(0): "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (II) Loading extension XINERAMA (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing extension GLX (II) config/hal: Adding input device ThinkPad Extra Buttons (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) ThinkPad Extra Buttons: always reports core events (**) ThinkPad Extra Buttons: Device: "/dev/input/event8" (II) ThinkPad Extra Buttons: Found keys (II) ThinkPad Extra Buttons: Configuring as keyboard (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event3" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device TPPS/2 IBM TrackPoint (**) TPPS/2 IBM TrackPoint: always reports core events (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5" (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons (II) TPPS/2 IBM TrackPoint: Found relative axes (II) TPPS/2 IBM TrackPoint: Found x and y relative axes (II) TPPS/2 IBM TrackPoint: Configuring as mouse (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE) (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00 (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0 (II) TPPS/2 IBM TrackPoint: initialized for relative axes. (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "colemod,dk" (II) config/hal: Adding input device Logitech USB Receiver (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event7" (II) Logitech USB Receiver: Found 20 mouse buttons (II) Logitech USB Receiver: Found scroll wheel(s) (II) Logitech USB Receiver: Found relative axes (II) Logitech USB Receiver: Found x and y relative axes (II) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as mouse (II) Logitech USB Receiver: Configuring as keyboard (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 (**) Logitech USB Receiver: (accel) filter chain progression: 2.00 (**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms (**) Logitech USB Receiver: (accel) set acceleration profile 0 (II) Logitech USB Receiver: initialized for relative axes. (II) config/hal: Adding input device Logitech USB Receiver (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event6" (II) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "colemod,dk" (II) config/hal: Adding input device Sleep Button (CM) (**) Sleep Button (CM): always reports core events (**) Sleep Button (CM): Device: "/dev/input/event2" (II) Sleep Button (CM): Found keys (II) Sleep Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (FF) (**) Power Button (FF): always reports core events (**) Power Button (FF): Device: "/dev/input/event0" (II) Power Button (FF): Found keys (II) Power Button (FF): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us"