nvidia bugreport log text

nvidia-bug-report.log (text/plain), 87.44 KB, created by Sergey Mironov on 2009-12-28 18:32:41 UTC

____________________________________________

Start of NVIDIA bug report log file.  Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'[e-mail]'.

nvidia-bug-report.sh Version: 3813502

Date: Mon Dec 28 21:34:00 MSK 2009
uname: Linux vault 2.6.31-gentoo-r6-my15 #1 SMP Sun Dec 27 13:28:07 MSK 2009 i686 Genuine Intel(R) CPU T2050 @ 1.60GHz GenuineIntel GNU/Linux

____________________________________________

/etc/issue

This is \n.\O (\s \m \r) \t


____________________________________________

/etc/gentoo-release
Gentoo Base System release 1.12.13

____________________________________________

/var/log/nvidia-installer.log does not exist

____________________________________________

/var/log/XFree86.0.log does not exist

____________________________________________

/var/log/Xorg.0.log

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6-my15 i686 
Current Operating System: Linux vault 2.6.31-gentoo-r6-my15 #1 SMP Sun Dec 27 13:28:07 MSK 2009 i686
Build Date: 27 December 2009  10:29:19PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 28 21:31:41 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cronyx/100dpi".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/cronyx/100dpi").
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/corefonts/,
	/usr/share/fonts/freefonts/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/terminus/,
	/usr/share/fonts/ttf-bitstream-vera/,
	/usr/share/fonts/intlfonts/,
	/usr/share/fonts/cyrillic/,
	/usr/share/fonts/freefont-ttf/,
	/usr/share/fonts/liberation-fonts/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x7e60
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:01d7:1043:1212 nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.5.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 7300 (G72) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.72.22.41.b3
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 7300 at PCI:1:0:0:
(--) NVIDIA(0):     CMO (DFP-0)
(--) NVIDIA(0): CMO (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): CMO (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (108, 106); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX

____________________________________________

/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Fri Aug 14 17:54:58 PDT 2009

# Modified by ierton
# I'm using this file with xorg-1.5.3 on gentoo
# Section "InputDevice"
#   Identifier    "Stylus0"
#   Driver        "wacom"
#   Option        "Device"        "/dev/input/wacom"   # USB ONLY
#   Option        "Type"          "stylus"
#   Option        "USB"           "on"                  # USB ONLY
# EndSection

Section "ServerLayout"

#     InputDevice    "Stylus0" "SendCoreEvents"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/TTF/"
    FontPath        "/usr/share/fonts/OTF"
    FontPath        "/usr/share/fonts/corefonts/"
    FontPath        "/usr/share/fonts/freefonts/"
    FontPath        "/usr/share/fonts/100dpi/"
    FontPath        "/usr/share/fonts/75dpi/"
    FontPath        "/usr/share/fonts/terminus/"
    FontPath        "/usr/share/fonts/ttf-bitstream-vera/"
    FontPath        "/usr/share/fonts/cronyx/100dpi"
    FontPath        "/usr/share/fonts/intlfonts/"
    FontPath        "/usr/share/fonts/cyrillic/"
    FontPath        "/usr/share/fonts/freefont-ttf/"
    FontPath        "/usr/share/fonts/liberation-fonts/"
EndSection

Section "Module"

#     Load  "freetype"
#     Load  "type1"
    Load           "record"
    Load           "xtrap"
    Load           "dbe"
    Load           "glx"
#     Load  "dri"
    Load           "extmod"
#	Load  "GLcore"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us,ru(winkeys)"
    Option         "XkbOptions" "grp_led:caps,ctrl:swapcaps,grp:shifts_toggle,ctrl:nocaps,terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"

#     Option      "ZAxisMapping" "4 5"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "ZAxisMapping" "4 5 6 7"
#     Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"

	# http://www.raydreams.com/prog/dpi.aspx
    Identifier     "Monitor0"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
    DisplaySize     310    194
EndSection

Section "Device"

	#Option      "DPI" "105 x 105"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
    BoardName      "Quadro NVS 110M / GeForce Go 7300"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo" "true"
	#Option      "UseEdidDpi" "false"
    SubSection     "Display"
        Viewport    0 0
        Depth       1
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection


____________________________________________

ldd /usr/bin/glxinfo

	linux-gate.so.1 =>  (0xb78b2000)
	libGL.so.1 => /usr/lib/opengl/xorg-x11/lib/libGL.so.1 (0xb783c000)
	libm.so.6 => /lib/libm.so.6 (0xb7817000)
	libc.so.6 => /lib/libc.so.6 (0xb76dd000)
	libX11.so.6 => /usr/lib/libX11.so.6 (0xb75c7000)
	libXext.so.6 => /usr/lib/libXext.so.6 (0xb75b8000)
	libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0xb75b2000)
	libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0xb75ad000)
	libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb75a7000)
	libdrm.so.2 => /usr/lib/libdrm.so.2 (0xb759d000)
	libpthread.so.0 => /lib/libpthread.so.0 (0xb7586000)
	libdl.so.2 => /lib/libdl.so.2 (0xb7582000)
	/lib/ld-linux.so.2 (0xb78b3000)
	libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7567000)
	libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7561000)
	libXau.so.6 => /usr/lib/libXau.so.6 (0xb755d000)
	librt.so.1 => /lib/librt.so.1 (0xb7554000)

____________________________________________

/usr/sbin/lspci -d "10de:*" -v -xxx

01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device 1212
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at fbfe0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
	Capabilities: [78] Express Endpoint, MSI 00
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Kernel driver in use: nvidia
	Kernel modules: nvidia
00: de 10 d7 01 07 00 10 00 a1 00 00 03 08 00 00 00
10: 00 00 00 fd 0c 00 00 c0 00 00 00 00 04 00 00 fc
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 12 12
30: 00 00 fe fb 60 00 00 00 00 00 00 00 0a 01 00 00
40: 43 10 12 12 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 80 04 00 00
80: 10 28 0a 00 01 2d 01 00 4b 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


____________________________________________

/usr/sbin/lspci -t

-[0000:00]-+-00.0
           +-01.0-[0000:01]----00.0
           +-1b.0
           +-1c.0-[0000:02]----00.0
           +-1c.2-[0000:03]----00.0
           +-1c.3-[0000:04-05]--
           +-1d.0
           +-1d.1
           +-1d.2
           +-1d.3
           +-1d.7
           +-1e.0-[0000:06]--+-00.0
           |                 +-00.1
           |                 +-00.2
           |                 \-00.3
           +-1f.0
           \-1f.1

____________________________________________

Skipping dmidecode output (dmidecode not found)

____________________________________________

/sbin/modinfo nvidia | grep vermagic

vermagic:       2.6.31-gentoo-r6-my15 SMP mod_unload CORE2 

____________________________________________

Scanning kernel log files for NVRM messages:

  /var/log/messages:
Dec 23 20:38:11 vault [    7.795246] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 23 20:38:11 vault [    7.795342] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 24 22:21:30 vault [    7.630314] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 24 22:21:30 vault [    7.630408] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 25 21:38:20 vault [    7.474595] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 25 21:38:20 vault [    7.474685] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 26 13:50:54 vault [    7.774175] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 26 13:50:54 vault [    7.774270] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 10:50:56 vault [    7.441386] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 27 10:50:56 vault [    7.441483] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 15:40:40 vault [ 7364.815559] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 15:40:40 vault [ 7364.815641] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 15:43:09 vault [   22.919454] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 15:43:09 vault [   22.919544] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 15:58:17 vault [    7.426949] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 15:58:17 vault [    7.427041] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 16:30:35 vault [   13.157245] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 27 16:30:35 vault [   13.157343] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 16:31:14 vault [   61.022344] NVRM: API mismatch: the client has the version 185.18.36, but
Dec 27 16:31:14 vault [   61.022346] NVRM: this kernel module has the version 180.60.  Please
Dec 27 16:31:14 vault [   61.022348] NVRM: make sure that this kernel module and all NVIDIA driver
Dec 27 16:31:14 vault [   61.022350] NVRM: components have the same version.
Dec 27 16:35:56 vault [    7.912023] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 16:35:56 vault [    7.912114] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 16:58:43 vault [    7.727130] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 27 16:58:43 vault [    7.727215] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 17:08:08 vault [    7.785201] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 17:08:08 vault [    7.785308] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 17:16:16 vault [    7.722046] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.60  Tue May 12 12:12:11 PDT 2009
Dec 27 17:16:16 vault [    7.722135] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 17:20:51 vault [    9.462260] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 17:20:51 vault [    9.462355] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 17:39:16 vault [   10.598069] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 17:39:16 vault [   10.598156] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 17:44:47 vault [    8.191893] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 17:44:47 vault [    8.191994] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 18:28:09 vault [    7.506811] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 18:28:09 vault [    7.506902] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 19:04:37 vault [   23.778723] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 19:04:37 vault [   23.778821] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 19:51:27 vault [    7.556709] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 19:51:27 vault [    7.556801] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 20:19:45 vault [    7.863667] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 20:19:45 vault [    7.863758] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 21:49:43 vault [    5.731393] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 21:49:43 vault [    5.731483] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 21:52:57 vault [    5.823845] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 21:52:57 vault [    5.823936] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 27 22:03:26 vault [    5.392290] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 27 22:03:26 vault [    5.392386] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 28 01:33:13 vault [    5.446765] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 28 01:33:13 vault [    5.446949] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 28 01:46:22 vault [    5.245162] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 28 01:46:22 vault [    5.245260] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 28 01:54:05 vault [    5.529880] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 28 01:54:05 vault [    5.530074] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 28 21:27:52 vault [    5.721925] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 28 21:27:52 vault [    5.722025] NVRM: CPU does not support the PAT, falling back to MTRRs.
Dec 28 21:32:44 vault [    5.438688] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
Dec 28 21:32:44 vault [    5.438777] NVRM: CPU does not support the PAT, falling back to MTRRs.
/var/log/kernel.log is not readable

____________________________________________

dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-gentoo-r6-my15 (root@vault) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Sun Dec 27 13:28:07 MSK 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
[    0.000000]  BIOS-e820: 000000001ffc0000 - 000000001ffce000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ffce000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x1ffc0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000001ffc0000 (usable)
[    0.000000]  modified: 000000001ffc0000 - 000000001ffce000 (ACPI data)
[    0.000000]  modified: 000000001ffce000 - 0000000020000000 (ACPI NVS)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-000000001ffc0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001fc00000 page 2M
[    0.000000]  001fc00000 - 001ffc0000 page 4k
[    0.000000] kernel direct mapping tables up to 1ffc0000 @ 10000-15000
[    0.000000] ACPI: RSDP 000f7a20 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 1ffc0000 0003C (v01 A M I  OEMRSDT  10000611 MSFT 00000097)
[    0.000000] ACPI: FACP 1ffc0200 00084 (v02 A M I  OEMFACP  10000611 MSFT 00000097)
[    0.000000] ACPI: DSDT 1ffc0460 0846F (v01  A8J00 A8J00005 00000005 INTL 02002026)
[    0.000000] ACPI: FACS 1ffce000 00040
[    0.000000] ACPI: APIC 1ffc0390 0005C (v01 A M I  OEMAPIC  10000611 MSFT 00000097)
[    0.000000] ACPI: MCFG 1ffc03f0 0003C (v01 A M I  OEMMCFG  10000611 MSFT 00000097)
[    0.000000] ACPI: BOOT 1ffc0430 00028 (v01 A M I  OEMBOOT  10000611 MSFT 00000097)
[    0.000000] ACPI: OEMB 1ffce040 00046 (v01 A M I  AMI_OEM  10000611 MSFT 00000097)
[    0.000000] ACPI: TCPA 1ffc88d0 00032 (v01 A M I  TBLOEMID 00000001 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ffc0000
[    0.000000]   low ram: 0 - 1ffc0000
[    0.000000]   node 0 low ram: 00000000 - 1ffc0000
[    0.000000]   node 0 bootmap 00011000 - 00014ff8
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 001ffc0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000200000 - 0000abae38]    TEXT DATA BSS ==> [0000200000 - 0000abae38]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [0000abb000 - 0000abf138]              BRK ==> [0000abb000 - 0000abf138]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001ffc0
[    0.000000]   HighMem  0x0001ffc0 -> 0x0001ffc0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001ffc0
[    0.000000] On node 0 totalpages: 130895
[    0.000000] free_area_init_node: node 0, pgdat c09ca540, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125920 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dee00000)
[    0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages at c1402000, static data 28828 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129871
[    0.000000] Kernel command line: root=/dev/hda2
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 509860k/524032k available (5372k kernel code, 13588k reserved, 2666k data, 384k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff6b000 - 0xfffff000   ( 592 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xe07c0000 - 0xff7fe000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdffc0000   ( 511 MB)
[    0.000000]       .init : 0xc09da000 - 0xc0a3a000   ( 384 kB)
[    0.000000]       .data : 0xc073f177 - 0xc09d9978   (2666 kB)
[    0.000000]       .text : 0xc0200000 - 0xc073f177   (5372 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:384
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1595.915 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.83 BogoMIPS (lpj=1595915)
[    0.000999] Security Framework initialized
[    0.000999] SELinux:  Initializing.
[    0.000999] SELinux:  Starting in permissive mode
[    0.000999] Mount-cache hash table entries: 512
[    0.000999] Initializing cgroup subsys ns
[    0.001009] Initializing cgroup subsys cpuacct
[    0.001166] Initializing cgroup subsys devices
[    0.001334] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001542] CPU: L2 cache: 2048K
[    0.001695] CPU: Physical Processor ID: 0
[    0.001845] CPU: Processor Core ID: 0
[    0.002005] using mwait in idle threads.
[    0.002160] Performance Counters: no PMU driver, software counters only.
[    0.002373] Checking 'hlt' instruction... OK.
[    0.006757] ACPI: Core revision 20090521
[    0.022401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.033218] CPU0: Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
[    0.033994] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 3191.50 BogoMIPS (lpj=1595752)
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.104459] CPU1: Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
[    0.105201] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.106994] Brought up 2 CPUs
[    0.107149] Total of 2 processors activated (6383.33 BogoMIPS).
[    0.107401] khelper used greatest stack depth: 6952 bytes left
[    0.108238] Time: 18:32:32  Date: 12/28/09
[    0.108450] NET: Registered protocol family 16
[    0.109022] ACPI: bus type pci registered
[    0.109170] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.109170] PCI: Not using MMCONFIG.
[    0.109986] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[    0.110143] PCI: Using configuration type 1 for base access
[    0.120016] bio: create slab <bio-0> at 0
[    0.122053] ACPI: EC: Look up EC in DSDT
[    0.131495] ACPI: Interpreter enabled
[    0.131659] ACPI: (supports S0 S1 S3 S4 S5)
[    0.131986] ACPI: Using IOAPIC for interrupt routing
[    0.132216] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.145972] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.145981] PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[    0.146230] PCI: Using MMCONFIG for extended config space
[    0.158113] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.158272] ACPI: EC: driver started in poll mode
[    0.158444] ACPI: Power Resource [GFAN] (off)
[    0.159210] ACPI: No dock devices found.
[    0.160106] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.160293] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.160293] pci 0000:00:01.0: PME# disabled
[    0.160468] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
[    0.160527] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.160980] pci 0000:00:1b.0: PME# disabled
[    0.161209] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.161368] pci 0000:00:1c.0: PME# disabled
[    0.161602] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.161761] pci 0000:00:1c.2: PME# disabled
[    0.162063] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.162221] pci 0000:00:1c.3: PME# disabled
[    0.162433] pci 0000:00:1d.0: reg 20 io port: [0xec00-0xec1f]
[    0.162498] pci 0000:00:1d.1: reg 20 io port: [0xe880-0xe89f]
[    0.162564] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[    0.162629] pci 0000:00:1d.3: reg 20 io port: [0xe480-0xe49f]
[    0.162700] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebfbc00-0xfebfbfff]
[    0.162767] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.162980] pci 0000:00:1d.7: PME# disabled
[    0.163288] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.163296] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.163979] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.164136] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 007f)
[    0.164978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 06f0 (mask 007f)
[    0.165228] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[    0.165524] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.165533] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.165542] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[    0.165551] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[    0.165560] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.165643] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.165658] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[    0.165673] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[    0.165688] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff]
[    0.165782] pci 0000:00:01.0: bridge 32bit mmio: [0xf9f00000-0xfdffffff]
[    0.165788] pci 0000:00:01.0: bridge 64bit mmio pref: [0xbdf00000-0xddefffff]
[    0.166102] pci 0000:02:00.0: reg 10 32bit mmio: [0xfe0ff000-0xfe0fffff]
[    0.166339] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.166544] pci 0000:02:00.0: PME# disabled
[    0.166834] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
[    0.166911] pci 0000:03:00.0: reg 10 io port: [0xc800-0xc8ff]
[    0.166939] pci 0000:03:00.0: reg 18 64bit mmio: [0xfe1ff000-0xfe1fffff]
[    0.166983] pci 0000:03:00.0: reg 30 32bit mmio: [0xfe1e0000-0xfe1effff]
[    0.167042] pci 0000:03:00.0: supports D1 D2
[    0.167045] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.167205] pci 0000:03:00.0: PME# disabled
[    0.167417] pci 0000:00:1c.2: bridge io port: [0xc000-0xcfff]
[    0.167423] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
[    0.167484] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[    0.167490] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
[    0.167498] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
[    0.167544] pci 0000:06:00.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[    0.167605] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.167765] pci 0000:06:00.0: PME# disabled
[    0.167958] pci 0000:06:00.1: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
[    0.168022] pci 0000:06:00.1: supports D1 D2
[    0.168025] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168185] pci 0000:06:00.1: PME# disabled
[    0.168378] pci 0000:06:00.2: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff]
[    0.168439] pci 0000:06:00.2: supports D1 D2
[    0.168442] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168603] pci 0000:06:00.2: PME# disabled
[    0.168797] pci 0000:06:00.3: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
[    0.168858] pci 0000:06:00.3: supports D1 D2
[    0.168861] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168979] pci 0000:06:00.3: PME# disabled
[    0.169195] pci 0000:00:1e.0: transparent bridge
[    0.169355] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.169388] pci_bus 0000:00: on NUMA node 0
[    0.169396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.169598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.169685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.169849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.170009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.170115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.185109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.186904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.187902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.188902] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.189901] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.190901] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.191902] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.192903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.194023] SCSI subsystem initialized
[    0.194148] libata version 3.00 loaded.
[    0.194148] usbcore: registered new interface driver usbfs
[    0.194155] usbcore: registered new interface driver hub
[    0.194977] usbcore: registered new device driver usb
[    0.195142] PCI: Using ACPI for IRQ routing
[    0.195170] pci 0000:00:1c.3: BAR 7: can't allocate resource
[    0.195972] pci 0000:00:1c.3: BAR 8: can't allocate resource
[    0.196126] pci 0000:00:1c.3: BAR 9: can't allocate resource
[    0.214996] cfg80211: Using static regulatory domain info
[    0.215151] cfg80211: Regulatory domain: US
[    0.215302] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.215549] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    0.215704] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.215860] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.215970] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.216125] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.216280] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    0.216438] cfg80211: Calling CRDA for country: US
[    0.216608] NetLabel: Initializing
[    0.216608] NetLabel:  domain hash size = 128
[    0.216968] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.217136] NetLabel:  unlabeled traffic allowed by default
[    0.217303] hpet clockevent registered
[    0.217303] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.217303] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.218117] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.221990] Slow work thread pool: Starting up
[    0.222164] Slow work thread pool: Ready
[    0.222164] FS-Cache: Loaded
[    0.227974] pnp: PnP ACPI init
[    0.228134] ACPI: bus type pnp registered
[    0.233064] pnp: PnP ACPI: found 16 devices
[    0.233218] ACPI: ACPI bus type pnp unregistered
[    0.233380] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.233545] system 00:09: ioport range 0xa00-0xa0f has been reserved
[    0.233704] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.233859] system 00:0a: ioport range 0x800-0x87f has been reserved
[    0.234023] system 00:0a: ioport range 0x480-0x4bf has been reserved
[    0.234179] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.234335] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.234495] system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.234651] system 00:0b: iomem range 0xfff80000-0xffffffff has been reserved
[    0.234812] system 00:0c: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.234976] system 00:0d: ioport range 0x400-0x41f has been reserved
[    0.235131] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.235377] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.235536] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[    0.235692] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[    0.235848] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[    0.236009] system 00:0d: iomem range 0xfec28000-0xfec2ffff has been reserved
[    0.236168] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[    0.236328] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.236485] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[    0.236641] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[    0.236798] system 00:0f: iomem range 0x100000-0x1fffffff could not be reserved
[    0.271799] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.271954] pci 0000:00:01.0:   IO window: disabled
[    0.272114] pci 0000:00:01.0:   MEM window: 0xf9f00000-0xfdffffff
[    0.272270] pci 0000:00:01.0:   PREFETCH window: 0x000000bdf00000-0x000000ddefffff
[    0.272518] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.272671] pci 0000:00:1c.0:   IO window: disabled
[    0.272829] pci 0000:00:1c.0:   MEM window: 0xfe000000-0xfe0fffff
[    0.272988] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.273146] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[    0.273301] pci 0000:00:1c.2:   IO window: 0xc000-0xcfff
[    0.273459] pci 0000:00:1c.2:   MEM window: 0xfe100000-0xfe1fffff
[    0.273615] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.273771] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[    0.273925] pci 0000:00:1c.3:   IO window: disabled
[    0.274085] pci 0000:00:1c.3:   MEM window: disabled
[    0.274242] pci 0000:00:1c.3:   PREFETCH window: disabled
[    0.274398] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.274552] pci 0000:00:1e.0:   IO window: disabled
[    0.274709] pci 0000:00:1e.0:   MEM window: 0xfea00000-0xfeafffff
[    0.274866] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.275033] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.275194] pci 0000:00:01.0: setting latency timer to 64
[    0.275204] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.275364] pci 0000:00:1c.0: setting latency timer to 64
[    0.275375] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.275535] pci 0000:00:1c.2: setting latency timer to 64
[    0.275545] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.275707] pci 0000:00:1c.3: setting latency timer to 64
[    0.275715] pci 0000:00:1e.0: setting latency timer to 64
[    0.275721] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.275725] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.275729] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfdffffff]
[    0.275733] pci_bus 0000:01: resource 2 pref mem [0xbdf00000-0xddefffff]
[    0.275737] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe0fffff]
[    0.275740] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
[    0.275744] pci_bus 0000:03: resource 1 mem: [0xfe100000-0xfe1fffff]
[    0.275748] pci_bus 0000:04: resource 0 mem: [0x0-0xfff]
[    0.275751] pci_bus 0000:04: resource 1 mem: [0x0-0xfffff]
[    0.275755] pci_bus 0000:04: resource 2 mem: [0x0-0xfffff]
[    0.275758] pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.275762] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.275765] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.275802] NET: Registered protocol family 2
[    0.276055] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.276510] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.276855] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.277112] TCP: Hash tables configured (established 16384 bind 16384)
[    0.277271] TCP reno registered
[    0.277496] NET: Registered protocol family 1
[    0.277811] Simple Boot Flag at 0x52 set to 0x1
[    0.278827] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    0.278989] apm: disabled - APM is not SMP safe.
[    0.279287] Scanning for low memory corruption every 60 seconds
[    0.279831] audit: initializing netlink socket (disabled)
[    0.279999] type=2000 audit(1262025152.279:1): initialized
[    0.296217] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.300303] VFS: Disk quotas dquot_6.5.2
[    0.300571] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.301792] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.302394] FS-Cache: Netfs 'nfs' registered for caching
[    0.302785] Installing knfsd (copyright (C) 1996 [e-mail]).
[    0.303298] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.303826] JFS: nTxBlock = 3984, nTxLock = 31874
[    0.305791] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.307029] SGI XFS Quota Management subsystem
[    0.307560] Btrfs loaded
[    0.307716] msgmni has been set to 996
[    0.308047] SELinux:  Registering netfilter hooks
[    0.309064] cryptomgr_test used greatest stack depth: 6752 bytes left
[    0.309331] alg: No test for stdrng (krng)
[    0.309689] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.309939] io scheduler noop registered
[    0.310095] io scheduler anticipatory registered
[    0.310247] io scheduler deadline registered
[    0.310502] io scheduler cfq registered (default)
[    0.310898] pci 0000:01:00.0: Boot video device
[    0.311137] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.311145] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.311355] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.311366] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.311650] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.311661] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.311934] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.311945] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.316587] Non-volatile memory driver v1.3
[    0.316915] intel_rng: FWH not detected
[    0.317203] Linux agpgart interface v0.103
[    0.317736] ACPI: AC Adapter [AC0] (on-line)
[    0.318095] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.318347] ACPI: Power Button [PWRF]
[    0.318618] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.319112] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.324061] ACPI: Lid Switch [LID]
[    0.324321] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.324572] ACPI: Power Button [PWRB]
[    0.324823] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.325082] ACPI: Sleep Button [SLPB]
[    0.325468] fan PNP0C0B:00: registered as cooling_device0
[    0.325629] ACPI: Fan [FN00] (off)
[    0.326128] ACPI: SSDT 1ffc8910 003CD (v01    AMI   CPU1PM 00000001 INTL 02002026)
[    0.326995] Marking TSC unstable due to TSC halts in idle
[    0.327211] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    0.327588] processor LNXCPU:00: registered as cooling_device1
[    0.327746] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.328177] Switched to high resolution mode on CPU 0
[    0.328266] ACPI Warning: Incorrect checksum in table [SSDT] - 69, should be FE 20090521 tbutils-246
[    0.328629] ACPI: SSDT 1ffc8ce0 003CD (v01    AMI   CPU2PM 00000001 INTL 02002026)
[    0.328957] Switched to high resolution mode on CPU 1
[    0.329564] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    0.329937] processor LNXCPU:01: registered as cooling_device2
[    0.330101] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.371819] thermal LNXTHERM:01: registered as thermal_zone0
[    0.371984] ACPI: Thermal Zone [THRM] (43 C)
[    0.374951] [drm] Initialized drm 1.1.0 20060810
[    0.375138] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.500303] ACPI: Battery Slot [BAT0] (battery present)
[    0.744142] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.747647] brd: module loaded
[    0.749158] loop: module loaded
[    0.749317] Uniform Multi-Platform E-IDE driver
[    0.749601] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[    0.749767] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.749932] piix 0000:00:1f.1: IDE port disabled
[    0.750101] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[    0.750267]     ide0: BM-DMA at 0xffa0-0xffa7
[    0.750434] Probing IDE interface ide0...
[    1.014359] hda: ST98823A, ATA DISK drive
[    1.473015] hdb: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[    1.473374] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    1.473558] hda: UDMA/100 mode selected
[    1.475447] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    1.476317] hdb: UDMA/33 mode selected
[    1.476832] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    1.500021] async/0 used greatest stack depth: 6508 bytes left
[    1.561976] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    1.562236] ide-gd driver 1.18
[    1.562414] hda: max request size: 512KiB
[    1.562731] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
[    1.563236] hda: cache flushes supported
[    1.563435]  hda: hda1 hda2 hda3 < hda5 hda6 > hda4
[    1.614614] ide-cd driver 5.00
[    1.616384] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[    1.616962] Uniform CD-ROM driver Revision: 3.20
[    1.626993] Loading iSCSI transport class v2.0-870.
[    1.627674] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[    1.627835] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[    1.628566] tun: Universal TUN/TAP device driver, 1.6
[    1.628721] tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
[    1.628956] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.629148] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.629354] r8169 0000:03:00.0: setting latency timer to 64
[    1.629436] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    1.629769] eth0: RTL8168b/8111b at 0xe0b24000, 08:00:27:3b:52:a6, XID 38000000 IRQ 28
[    1.631515] console [netcon0] enabled
[    1.631667] netconsole: network logging started
[    1.632305] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.632486] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.632651] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.632656] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.632923] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.637079] ehci_hcd 0000:00:1d.7: debug port 1
[    1.637238] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.637254] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[    1.647013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.647212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.647375] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.647622] usb usb1: Product: EHCI Host Controller
[    1.647775] usb usb1: Manufacturer: Linux 2.6.31-gentoo-r6-my15 ehci_hcd
[    1.647930] usb usb1: SerialNumber: 0000:00:1d.7
[    1.648191] usb usb1: configuration #1 chosen from 1 choice
[    1.648429] hub 1-0:1.0: USB hub found
[    1.648590] hub 1-0:1.0: 8 ports detected
[    1.648862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.649085] uhci_hcd: USB Universal Host Controller Interface driver
[    1.649289] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.649451] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.649455] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.649692] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.649964] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[    1.650165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.650329] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.650574] usb usb2: Product: UHCI Host Controller
[    1.650727] usb usb2: Manufacturer: Linux 2.6.31-gentoo-r6-my15 uhci_hcd
[    1.650884] usb usb2: SerialNumber: 0000:00:1d.0
[    1.651146] usb usb2: configuration #1 chosen from 1 choice
[    1.651380] hub 2-0:1.0: USB hub found
[    1.651541] hub 2-0:1.0: 2 ports detected
[    1.651746] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.651908] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.651912] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.652150] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.652434] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[    1.652626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.652785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.653039] usb usb3: Product: UHCI Host Controller
[    1.653192] usb usb3: Manufacturer: Linux 2.6.31-gentoo-r6-my15 uhci_hcd
[    1.653352] usb usb3: SerialNumber: 0000:00:1d.1
[    1.653606] usb usb3: configuration #1 chosen from 1 choice
[    1.653835] hub 3-0:1.0: USB hub found
[    1.653993] hub 3-0:1.0: 2 ports detected
[    1.654208] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    1.654375] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.654379] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.654609] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.654889] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e800
[    1.655089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.655247] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.655499] usb usb4: Product: UHCI Host Controller
[    1.655651] usb usb4: Manufacturer: Linux 2.6.31-gentoo-r6-my15 uhci_hcd
[    1.655809] usb usb4: SerialNumber: 0000:00:1d.2
[    1.656070] usb usb4: configuration #1 chosen from 1 choice
[    1.656300] hub 4-0:1.0: USB hub found
[    1.656458] hub 4-0:1.0: 2 ports detected
[    1.656662] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    1.656825] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.656829] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.657076] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.657362] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e480
[    1.657555] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.657712] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.657957] usb usb5: Product: UHCI Host Controller
[    1.658121] usb usb5: Manufacturer: Linux 2.6.31-gentoo-r6-my15 uhci_hcd
[    1.658281] usb usb5: SerialNumber: 0000:00:1d.3
[    1.658538] usb usb5: configuration #1 chosen from 1 choice
[    1.658766] hub 5-0:1.0: USB hub found
[    1.658925] hub 5-0:1.0: 2 ports detected
[    1.659306] usbcore: registered new interface driver cdc_acm
[    1.659462] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.659774] usbcore: registered new interface driver usblp
[    1.659992] usbcore: registered new interface driver cdc_wdm
[    1.660218] usbcore: registered new interface driver usbtmc
[    1.660458] usbcore: registered new interface driver libusual
[    1.660756] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.663814] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.665210] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.665375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.665534] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.665692] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.665850] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.666096] mice: PS/2 mouse device common for all mice
[    1.666755] rtc_cmos 00:03: RTC can wake from S4
[    1.666987] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.667178] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.667396] i2c /dev entries driver
[    1.667654] Linux video capture interface: v2.00
[    1.667858] gspca: main v2.6.0 registered
[    1.668091] vivi-000: V4L2 device registered as /dev/video0
[    1.668249] Video Technology Magazine Virtual Video Capture Board ver 0.6.0 successfully loaded.
[    1.669146] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [e-mail]
[    1.669812] cpuidle: using governor ladder
[    1.670658] cpuidle: using governor menu
[    1.670876] sdhci: Secure Digital Host Controller Interface driver
[    1.671043] sdhci: Copyright(c) Pierre Ossman
[    1.671209] sdhci-pci 0000:06:00.1: SDHCI controller found [1180:0822] (rev 19)
[    1.671479] sdhci-pci 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.673849] Registered led device: mmc0::
[    1.675156] mmc0: SDHCI controller on PCI [0000:06:00.1] using PIO
[    1.675403] ricoh-mmc: Ricoh MMC Controller disabling driver
[    1.675558] ricoh-mmc: Copyright(c) Philip Langdale
[    1.675782] No iBFT detected.
[    1.677914] usbcore: registered new interface driver hiddev
[    1.678156] usbcore: registered new interface driver usbhid
[    1.678314] usbhid: v2.6:USB HID core driver
[    1.678565] Netfilter messages via NETLINK v0.30.
[    1.678741] nf_conntrack version 0.5.0 (8188 buckets, 32752 max)
[    1.679249] ctnetlink v0.93: registering with nfnetlink.
[    1.680245] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.680427] TCP cubic registered
[    1.680585] Initializing XFRM netlink socket
[    1.681262] NET: Registered protocol family 10
[    1.683136] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.683378] IPv6 over IPv4 tunneling driver
[    1.684476] NET: Registered protocol family 17
[    1.684634] NET: Registered protocol family 15
[    1.685129] RPC: Registered udp transport module.
[    1.685286] RPC: Registered tcp transport module.
[    1.685461] 802.1Q VLAN Support v1.8 Ben Greear <[e-mail]>
[    1.685620] All bugs added by David S. Miller <[e-mail]>
[    1.685779] lib80211: common routines for IEEE802.11 drivers
[    1.685932] lib80211_crypt: registered algorithm 'NULL'
[    1.685938] Using IPI No-Shortcut mode
[    1.686372] PM: Resume from disk failed.
[    1.686387] registered taskstats version 1
[    1.686667]   Magic number: 5:529:545
[    1.695257] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.001055] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    2.126965] usb 1-4: New USB device found, idVendor=0ac8, idProduct=0321
[    2.127150] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.127339] usb 1-4: Product: USB2.0 Web Camera
[    2.127504] usb 1-4: Manufacturer: Vimicro Corp.
[    2.127782] usb 1-4: configuration #1 chosen from 1 choice
[    2.334043] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    2.497395] usb 2-1: New USB device found, idVendor=046d, idProduct=c016
[    2.497552] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.497708] usb 2-1: Product: Optical USB Mouse
[    2.497860] usb 2-1: Manufacturer: Logitech
[    2.498138] usb 2-1: configuration #1 chosen from 1 choice
[    2.505035] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000
[    2.514757] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[    2.515265] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
[    2.542280] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[    2.545180] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    2.576516] EXT3-fs: hda2: couldn't mount because of unsupported optional features (240).
[    2.577191] EXT2-fs: hda2: couldn't mount because of unsupported optional features (240).
[    2.582330] EXT4-fs (hda2): barriers enabled
[    2.599280] kjournald2 starting: pid 877, dev hda2:8, commit interval 5 seconds
[    2.599310] EXT4-fs (hda2): delayed allocation enabled
[    2.599317] EXT4-fs: file extents enabled
[    2.600376] EXT4-fs: mballoc enabled
[    2.600541] EXT4-fs (hda2): mounted filesystem with ordered data mode
[    2.600816] VFS: Mounted root (ext4 filesystem) readonly on device 3:2.
[    2.601034] Freeing unused kernel memory: 384k freed
[    2.601531] Write protecting the kernel text: 5376k
[    2.601759] Write protecting the kernel read-only data: 2288k
[    3.686225] stty used greatest stack depth: 6120 bytes left
[    4.314352] udev: starting version 146
[    4.356478] asus_laptop: Asus Laptop Support version 0.42
[    4.360103] asus_laptop:   A8J model detected
[    4.361169] input: Asus Laptop extra buttons as /devices/virtual/input/input7
[    4.484345] gspca: probing 0ac8:0321
[    4.484719] vc032x: check sensor header 2c
[    4.685264] vc032x: Sensor ID 7660 (7)
[    4.685268] vc032x: Find Sensor OV7660
[    4.686548] gspca: probe ok
[    4.686579] usbcore: registered new interface driver vc032x
[    4.686584] vc032x: registered
[    4.742760] cdrom_id used greatest stack depth: 5828 bytes left
[    4.758872] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[    4.758876] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[    4.759035] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.759051] iwl3945 0000:02:00.0: setting latency timer to 64
[    4.829412] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    4.829417] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    4.829559] iwl3945 0000:02:00.0: irq 29 for MSI/MSI-X
[    4.836566] phy0: Selected rate control algorithm 'iwl-3945-rs'
[    5.177944] nvidia: module license 'NVIDIA' taints kernel.
[    5.177949] Disabling lock debugging due to kernel taint
[    5.438348] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.438359] nvidia 0000:01:00.0: setting latency timer to 64
[    5.438688] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[    5.438777] NVRM: CPU does not support the PAT, falling back to MTRRs.
[    5.535046] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    5.535081] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.892874] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    6.194706] EXT4-fs (hda2): internal journal on hda2:8
[    6.400984] fuse init (API version 7.12)
[    6.421294] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[    6.421298] vboxdrv: Successfully done.
[    6.421300] vboxdrv: Found 2 processor cores.
[    6.421694] vboxdrv: fAsync=0 offMin=0x3a8 offMax=0x2e80
[    6.422061] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    6.422064] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
[    6.652765] XFS mounting filesystem hda5
[    6.921719] Ending clean XFS mount for filesystem: hda5
[    6.952149] kjournald starting.  Commit interval 5 seconds
[    6.952345] EXT3 FS on hda4, internal journal
[    6.952355] EXT3-fs: mounted filesystem with writeback data mode.
[    7.058216] Adding 1084348k swap on /dev/hda6.  Priority:-1 extents:1 across:1084348k 
[   14.518017] r8169: eth0: link up
[   14.518028] r8169: eth0: link up
[   14.572947] r8169: eth0: link up
[   25.114043] eth0: no IPv6 routers present
____________________________________________

Using built-in specs.
Target: i486-pc-linux-gnu
Configured with: /home/portage/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/configure --prefix=/usr --bindir=/usr/i486-pc-linux-gnu/gcc-bin/4.3.4 --includedir=/usr/lib/gcc/i486-pc-linux-gnu/4.3.4/include --datadir=/usr/share/gcc-data/i486-pc-linux-gnu/4.3.4 --mandir=/usr/share/gcc-data/i486-pc-linux-gnu/4.3.4/man --infodir=/usr/share/gcc-data/i486-pc-linux-gnu/4.3.4/info --with-gxx-include-dir=/usr/lib/gcc/i486-pc-linux-gnu/4.3.4/include/g++-v4 --host=i486-pc-linux-gnu --build=i486-pc-linux-gnu --disable-altivec --disable-fixed-point --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --disable-libgcj --with-arch=i486 --enable-languages=c,c++,treelang,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.3.4 p1.0, pie-10.1.5'
Thread model: posix
gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) 
____________________________________________

Using built-in specs.
Target: i486-pc-linux-gnu
Configured with: /home/portage/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/configure --prefix=/usr --bindir=/usr/i486-pc-linux-gnu/gcc-bin/4.3.4 --includedir=/usr/lib/gcc/i486-pc-linux-gnu/4.3.4/include --datadir=/usr/share/gcc-data/i486-pc-linux-gnu/4.3.4 --mandir=/usr/share/gcc-data/i486-pc-linux-gnu/4.3.4/man --infodir=/usr/share/gcc-data/i486-pc-linux-gnu/4.3.4/info --with-gxx-include-dir=/usr/lib/gcc/i486-pc-linux-gnu/4.3.4/include/g++-v4 --host=i486-pc-linux-gnu --build=i486-pc-linux-gnu --disable-altivec --disable-fixed-point --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --disable-libgcj --with-arch=i486 --enable-languages=c,c++,treelang,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.3.4 p1.0, pie-10.1.5'
Thread model: posix
gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) 
____________________________________________

xset -q:

xset:  unable to open display ""
____________________________________________

nvidia-settings -q all:


ERROR: The control display is undefined; please run `nvidia-settings
       --help` for usage information.

____________________________________________

/proc/cmdline
root=/dev/hda2

____________________________________________

/proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 14
model name	: Genuine Intel(R) CPU           T2050  @ 1.60GHz
stepping	: 8
cpu MHz		: 1595.915
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor est tm2 xtpr pdcm
bogomips	: 3191.83
clflush size	: 64
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 14
model name	: Genuine Intel(R) CPU           T2050  @ 1.60GHz
stepping	: 8
cpu MHz		: 1595.915
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 1
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor est tm2 xtpr pdcm
bogomips	: 3191.50
clflush size	: 64
power management:


____________________________________________

/proc/interrupts
           CPU0       CPU1       
  0:      24343          0   IO-APIC-edge      timer
  1:        201          0   IO-APIC-edge      i8042
  8:         69          0   IO-APIC-edge      rtc0
  9:       1411          0   IO-APIC-fasteoi   acpi
 12:        145          0   IO-APIC-edge      i8042
 14:       4099          0   IO-APIC-edge      ide0
 17:          0          0   IO-APIC-fasteoi   mmc0
 19:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3
 20:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4
 21:        383          0   IO-APIC-fasteoi   HDA Intel
 22:          0          0   IO-APIC-fasteoi   uhci_hcd:usb5
 23:        190          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
 28:         50          0   PCI-MSI-edge      eth0
 29:          0          0   PCI-MSI-edge      iwl3945
NMI:          0          0   Non-maskable interrupts
LOC:       9145      18177   Local timer interrupts
SPU:          0          0   Spurious interrupts
CNT:          0          0   Performance counter interrupts
PND:          0          0   Performance pending work
RES:       2737       3392   Rescheduling interrupts
CAL:         10         46   Function call interrupts
TLB:        912       1078   TLB shootdowns
ERR:          0
MIS:          0

____________________________________________

/proc/meminfo
MemTotal:         510376 kB
MemFree:          396572 kB
Buffers:           10464 kB
Cached:            64676 kB
SwapCached:            0 kB
Active:            34904 kB
Inactive:          51808 kB
Active(anon):      11768 kB
Inactive(anon):        0 kB
Active(file):      23136 kB
Inactive(file):    51808 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:             0 kB
HighFree:              0 kB
LowTotal:         510376 kB
LowFree:          396572 kB
SwapTotal:       1084348 kB
SwapFree:        1084348 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:         11644 kB
Mapped:             4736 kB
Slab:               9468 kB
SReclaimable:       4552 kB
SUnreclaim:         4916 kB
PageTables:          408 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1339536 kB
Committed_AS:      40076 kB
VmallocTotal:     508152 kB
VmallocUsed:       14820 kB
VmallocChunk:     473268 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       4096 kB
DirectMap4k:       16128 kB
DirectMap4M:      507904 kB

____________________________________________

/proc/modules
vboxnetadp 63024 0 - Live 0xe20a0000
vboxnetflt 68072 0 - Live 0xe2076000
vboxdrv 97624 1 vboxnetflt, Live 0xe2044000
fuse 50624 0 - Live 0xe2014000
snd_hda_codec_si3054 4020 1 - Live 0xe1fa2000
snd_hda_codec_analog 53340 1 - Live 0xe1f92000
snd_hda_intel 23016 0 - Live 0xe1f67000
snd_hda_codec 54836 3 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel, Live 0xe1f4d000
snd_hwdep 6168 1 snd_hda_codec, Live 0xe1ee9000
snd_pcm 59304 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec, Live 0xe1e74000
nvidia 9576144 0 - Live 0xe1534000 (P)
snd_timer 16728 1 snd_pcm, Live 0xe0b67000
snd 46292 7 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer, Live 0xe0b51000
snd_page_alloc 7392 2 snd_hda_intel,snd_pcm, Live 0xe0afa000
iwl3945 74840 0 - Live 0xe0ae0000
iwlcore 90740 1 iwl3945, Live 0xe0aad000
gspca_vc032x 20592 0 - Live 0xe0a88000
asus_laptop 14828 0 - Live 0xe07d3000

____________________________________________

/proc/version
Linux version 2.6.31-gentoo-r6-my15 (root@vault) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Sun Dec 27 13:28:07 MSK 2009

____________________________________________

/proc/pci does not exist

____________________________________________

/proc/iomem
00000000-0000ffff : reserved
00010000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cefff : Video ROM
000cf000-000cffff : Adapter ROM
000e0000-000fffff : reserved
  000f0000-000fffff : System ROM
00100000-1ffbffff : System RAM
  00200000-0073f176 : Kernel code
  0073f177-009d9977 : Kernel data
  00a41000-00abae37 : Kernel bss
1ffc0000-1ffcdfff : ACPI Tables
1ffce000-1fffffff : ACPI Non-volatile Storage
bdf00000-ddefffff : PCI Bus 0000:01
  c0000000-cfffffff : 0000:01:00.0
e0000000-e3ffffff : PCI MMCONFIG 0 [00-3f]
  e0000000-e3ffffff : pnp 00:0e
f9f00000-fdffffff : PCI Bus 0000:01
  fbfe0000-fbffffff : 0000:01:00.0
  fc000000-fcffffff : 0000:01:00.0
  fd000000-fdffffff : 0000:01:00.0
    fd000000-fdffffff : nvidia
fe000000-fe0fffff : PCI Bus 0000:02
  fe0ff000-fe0fffff : 0000:02:00.0
    fe0ff000-fe0fffff : iwl3945
fe100000-fe1fffff : PCI Bus 0000:03
  fe1e0000-fe1effff : 0000:03:00.0
  fe1ff000-fe1fffff : 0000:03:00.0
    fe1ff000-fe1fffff : r8169
fea00000-feafffff : PCI Bus 0000:06
  feafec00-feafecff : 0000:06:00.3
  feaff000-feaff0ff : 0000:06:00.2
  feaff400-feaff4ff : 0000:06:00.1
    feaff400-feaff4ff : mmc0
  feaff800-feafffff : 0000:06:00.0
febfbc00-febfbfff : 0000:00:1d.7
  febfbc00-febfbfff : ehci_hcd
febfc000-febfffff : 0000:00:1b.0
  febfc000-febfffff : ICH HD audio
fec00000-fec00fff : IOAPIC 0
fec10000-fec17fff : pnp 00:0d
fec18000-fec1ffff : pnp 00:0d
fec20000-fec27fff : pnp 00:0d
fec28000-fec2ffff : pnp 00:0d
fed13000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:0a
fed20000-fed8ffff : pnp 00:0a
fee00000-fee00fff : Local APIC
  fee00000-fee00fff : reserved
    fee00000-fee00fff : pnp 00:0d
ffb80000-ffffffff : reserved
  ffb80000-ffbfffff : pnp 00:0b
  ffc00000-fff7ffff : pnp 00:0c
  fff80000-ffffffff : pnp 00:0b

____________________________________________

/proc/mtrr
reg00: base=0x000000000 (    0MB), size=  512MB, count=1: write-back

____________________________________________

/proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
GCC version:  gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) 

____________________________________________

/proc/driver/nvidia/cards/0
Model: 		 GeForce Go 7300
IRQ:   		 16
Video BIOS: 	 ??.??.??.??.??
Card Type: 	 PCI-E
DMA Size: 	 32 bits
DMA Mask: 	 0xffffffff
Bus Location: 	 01.00.0

____________________________________________

/proc/driver/nvidia/warnings/README
The NVIDIA graphics driver tries to detect potential problems
with the host system and warns about them using the system's
logging mechanisms. Important warning message are also logged
to dedicated text files in this directory.

____________________________________________

/proc/driver/nvidia/registry
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 0
EnableAGPFW: 0
Mobile: [phone]
ResmanDebugLevel: 4294967295
RmLogonRC: 1
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 27
DeviceFileMode: 432
RemapLimit: 0
UpdateMemoryTypes: 4294967295
UseVBios: 1
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
EnableMSI: 0
MapRegistersEarly: 0
RmNvclkIdleGraphics: 0
RegistryDwords: ""

____________________________________________

/proc/asound/cards
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfebfc000 irq 21

____________________________________________

/proc/asound/pcm
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1
00-01: AD198x Digital : AD198x Digital : playback 1
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1

____________________________________________

/proc/asound/modules
 0 snd_hda_intel

____________________________________________

/proc/asound/devices
  2:        : timer
  3: [ 0- 6]: digital audio playback
  4: [ 0- 6]: digital audio capture
  5: [ 0- 1]: digital audio playback
  6: [ 0- 0]: digital audio playback
  7: [ 0- 0]: digital audio capture
  8: [ 0- 1]: hardware dependent
  9: [ 0- 0]: hardware dependent
 10: [ 0]   : control

____________________________________________

/proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.

____________________________________________

/proc/asound/timers
G0: system timer : 1000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
P0-1-0: PCM playback 0-1-0 : SLAVE
P0-6-0: PCM playback 0-6-0 : SLAVE
P0-6-1: PCM capture 0-6-1 : SLAVE

____________________________________________

/proc/asound/hwdep
00-01: HDA Codec 1
00-00: HDA Codec 0

____________________________________________

/proc/asound/card0/codec#0
Codec: Analog Devices AD1986A
Address: 0
Function Id: 0x1
Vendor Id: 0x11d41986
Subsystem Id: 0x10431153
Revision Id: 0x100500
No Modem Function Group found
Default PCM:
    rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=0, o=1, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x60]: 44100 48000
    bits [0x2]: 16
    formats [0x5]: PCM AC3
  Delay: 3 samples
  Connection: 2
     0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x10 0x10]
  Converter: stream=0, channel=0
  Power: setting=D0, actual=D0
  Processing caps: benign=1, ncoeff=70
Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  Power: setting=D0, actual=D0
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Power: setting=D0, actual=D0
  Connection: 1
     0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
  Connection: 8
     0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
  Connection: 1
     0x07
Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80] [0x80]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80]
  Connection: 2
     0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
  Connection: 3
     0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
  Connection: 2
     0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 8
     0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 3
     0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo R/L
  Connection: 2
     0x0f* 0x2b
  Processing caps: benign=1, ncoeff=0
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x02 0x02]
  Connection: 0
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x96 0x96]
  Connection: 1
     0x11
Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80]
  Connection: 1
     0x23
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Connection: 1
     0x22
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Connection: 1
     0x21
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x0c 0x0c]
  Connection: 1
     0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
  Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
  Amp-Out vals:  [0x89]
  Connection: 2
     0x19* 0x24
Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0000001f: OUT HP Detect Trigger ImpSense
  Pin Default 0x42214021: [N/A] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x1
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0a
Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0001001f: OUT HP EAPD Detect Trigger ImpSense
  EAPD 0x0:
  Pin Default 0x01014011: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x1
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0b
Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000037: IN OUT Detect Trigger ImpSense
  Pin Default 0x41013012: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x1, Sequence = 0x2
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0c
Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out R/L
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00001737: IN OUT Detect Trigger ImpSense
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x41019015: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x1, Sequence = 0x5
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0d
Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80]
  Pincap 0x00000010: OUT
  Pin Default 0x501710f0: [N/A] Speaker at Int N/A
    Conn = Analog, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
  Pincap 0x00001727: IN Detect Trigger ImpSense
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02a19020: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
  Pincap 0x00001727: IN Detect Trigger ImpSense
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x418130f0: [N/A] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
  Pincap 0x00000027: IN Detect Trigger ImpSense
  Pin Default 0x509710f0: [N/A] Aux at Int N/A
    Conn = Analog, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x903310f0: [Fixed] CD at Int N/A
    Conn = ATAPI, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x50b710f0: [N/A] Telephony at Int N/A
    Conn = Analog, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x90f7f0f0: [Fixed] Other at Int N/A
    Conn = Analog, Color = Other
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x014510f0: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
  Power: setting=D0, actual=D0
  Connection: 8
     0x07 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
  Connection: 2
     0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
  Connection: 2
     0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
  Connection: 2
     0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
  Connection: 3
     0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
  Connection: 1
     0x0f

____________________________________________

/proc/asound/card0/codec#1
Codec: Motorola Si3054
Address: 1
Function Id: 0x2
Vendor Id: 0x10573055
Subsystem Id: 0x104310c6
Revision Id: 0x100700
Modem Function Group: 0x1

____________________________________________

End of NVIDIA bug report log file.