output of dmesg

dmesg (text/plain), 30.84 KB, created by Jan Essert on 2009-12-24 14:44:58 UTC

Linux version 2.6.32-gentoo (root@charlie) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #2 Sat Dec 12 11:40:50 CET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
 BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
 BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
 BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1ff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 01FF80000 mask FFFF80000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ff70000
 0000000000 - 0000400000 page 4k
 0000400000 - 001fc00000 page 2M
 001fc00000 - 001ff70000 page 4k
kernel direct mapping tables up to 1ff70000 @ 10000-15000
ACPI: RSDP 000f6f00 00014 (v00 PTLTD )
ACPI: RSDT 1ff7637d 00030 (v01 PTLTD  Wistron  06040000  LTP 00000000)
ACPI: FACP 1ff7aed2 00074 (v01 INTEL  ODEM     06040000 PTL  00000050)
ACPI: DSDT 1ff768a3 0462F (v01 INTEL  ODEM     06040000 MSFT 0100000E)
ACPI: FACS 1ff7bfc0 00040
ACPI: BOOT 1ff7afd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 1ff763ad 004EE (v01 INTEL    GV3Ref 00001001 MSFT 0100000E)
511MB LOWMEM available.
  mapped low ram: 0 - 1ff70000
  low ram: 0 - 1ff70000
  node 0 low ram: 00000000 - 1ff70000
  node 0 bootmap 00011000 - 00014ff0
(6 early reservations) ==> bootmem [0000000000 - 001ff70000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 00014aece0]    TEXT DATA BSS ==> [0001000000 - 00014aece0]
  #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #3 [00014af000 - 00014b5124]              BRK ==> [00014af000 - 00014b5124]
  #4 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #5 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0001ff70
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0001ff70
On node 0 totalpages: 130815
free_area_init_node: node 0, pgdat c13fad40, node_mem_map c14b6200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 991 pages used for memmap
  Normal zone: 125841 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:df800000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
Kernel command line: root=/dev/sda5 resume=/dev/sda6 usbcore.autosuspend=0 ec_polled=true
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 513832k/523712k available (2764k kernel code, 9340k reserved, 1322k data, 276k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
    vmalloc : 0xe0770000 - 0xfffa2000   ( 504 MB)
    lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
      .init : 0xc13fe000 - 0xc1443000   ( 276 kB)
      .data : 0xc12b3354 - 0xc13fdf28   (1322 kB)
      .text : 0xc1000000 - 0xc12b3354   (2764 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
CPU 0 irqstacks, hard=c13c7000 soft=c13c8000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1694.516 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3389.03 BogoMIPS (lpj=6778064)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
mce: CPU supports 5 MCE banks
------------[ cut here ]------------
WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x32/0x40()
Hardware name: WIM 2030
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.32-gentoo #2
Call Trace:
 [<c1024f8e>] ? warn_slowpath_common+0x6e/0xb0
 [<c1014302>] ? native_apic_write_dummy+0x32/0x40
 [<c1024fe3>] ? warn_slowpath_null+0x13/0x20
 [<c1014302>] ? native_apic_write_dummy+0x32/0x40
 [<c10101fa>] ? intel_init_thermal+0xaa/0x1c0
 [<c1010088>] ? mce_intel_feature_init+0x8/0x50
 [<c1420c2b>] ? mcheck_init+0x227/0x2a7
 [<c141f887>] ? identify_cpu+0x2bd/0x2cb
 [<c1054742>] ? __delayacct_tsk_init+0x12/0x20
 [<c1054742>] ? __delayacct_tsk_init+0x12/0x20
 [<c1402423>] ? identify_boot_cpu+0xa/0x1e
 [<c14025de>] ? check_bugs+0x8/0xe2
 [<c1054742>] ? __delayacct_tsk_init+0x12/0x20
 [<c13fe628>] ? start_kernel+0x220/0x22f
 [<c13fe246>] ? unknown_bootoption+0x0/0x190
---[ end trace 4eaa2a86a8e2da22 ]---
CPU0: Thermal monitoring enabled (TM2)
Performance Events: 
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0c00)
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd7d5, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:04.0: supports D1 D2
pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:04.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:04.1: supports D1 D2
pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.1: PME# disabled
pci 0000:02:04.2: reg 10 32bit mmio: [0xd0209000-0xd02097ff]
pci 0000:02:04.2: reg 14 32bit mmio: [0xd0200000-0xd0203fff]
pci 0000:02:04.2: supports D1 D2
pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:04.2: PME# disabled
pci 0000:02:04.3: reg 10 32bit mmio: [0xd0204000-0xd0205fff]
pci 0000:02:04.3: supports D1 D2
pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:04.3: PME# disabled
pci 0000:02:05.0: reg 10 32bit mmio: [0xd0206000-0xd0207fff]
pci 0000:02:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:06.0: reg 10 32bit mmio: [0xd0208000-0xd0208fff]
pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x600-0x61f has been reserved
system 00:04: ioport range 0x700-0x70f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x3000-0x3fff
pci 0000:00:01.0:   MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0:   PREFETCH window: 0xd8000000-0xdfffffff
pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:04.0:   IO window: 0x004000-0x0040ff
pci 0000:02:04.0:   IO window: 0x004400-0x0044ff
pci 0000:02:04.0:   PREFETCH window: 0x20000000-0x23ffffff
pci 0000:02:04.0:   MEM window: 0x2c000000-0x2fffffff
pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:04.1:   IO window: 0x004800-0x0048ff
pci 0000:02:04.1:   IO window: 0x004c00-0x004cff
pci 0000:02:04.1:   PREFETCH window: 0x24000000-0x27ffffff
pci 0000:02:04.1:   MEM window: 0x30000000-0x33ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x4000-0x4fff
pci 0000:00:1e.0:   MEM window: 0xd0200000-0xd02fffff
pci 0000:00:1e.0:   PREFETCH window: 0x20000000-0x29ffffff
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:04.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:02:04.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd02fffff]
pci_bus 0000:02: resource 2 pref mem [0x20000000-0x29ffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io:  [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io:  [0x4400-0x44ff]
pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
pci_bus 0000:03: resource 3 mem: [0x2c000000-0x2fffffff]
pci_bus 0000:07: resource 0 io:  [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io:  [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 pref mem [0x24000000-0x27ffffff]
pci_bus 0000:07: resource 3 mem: [0x30000000-0x33ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Simple Boot Flag at 0x36 set to 0x1
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1003
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=400.00 Mhz, System=215.00 MHz
radeonfb: PLL min 20000 max 40000
radeonfb: Reversed DACs detected
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768                
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon 4e50 "NP"
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
serial 0000:00:1f.6: PCI INT B disabled
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
ata2.00: ATAPI: PIONEER DVD-RW  DVR-K14L, 1.00, max UDMA/33
ata1.00: ATA-5: HITACHI_DK23FA-80, 00M3A0A2, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA 
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23FA-8 00M3 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-K14L 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
registered taskstats version 1
EXT3-fs: sda5: couldn't mount because of unsupported optional features (40).
EXT2-fs: sda5: couldn't mount because of unsupported optional features (40).
EXT4-fs (sda5): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
Freeing unused kernel memory: 276k freed
udev: starting version 149
Linux agpgart interface v0.103
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: I/O resource 0000:00:1f.3 [0x1880-0x189f] conflicts with ACPI region SBUS [0x1880-0x188f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRC] (28 C)
processor LNXCPU:00: registered as cooling_device0
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THRS] (17 C)
ACPI: Battery Slot [BAT0] (battery present)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
usb 2-2: new low speed USB device using uhci_hcd and address 2
yenta_cardbus 0000:02:04.0: CardBus bridge found [17c0:3007]
yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:04.0: TI: mfunc 0x01aa1b22, devctl 0x64
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k
ipw2200: Copyright(c) 2003-2006 Intel Corporation
usb 2-2: configuration #1 chosen from 1 choice
yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x00f8, PCI irq 11
yenta_cardbus 0000:02:04.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x29ffffff
tifm_7xx1 0000:02:04.3: enabling device (0000 -> 0002)
tifm_7xx1 0000:02:04.3: PCI INT D -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ohci1394 0000:02:04.2: PCI INT C -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[d0209000-d02097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ipw2200 0000:02:06.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ipw2200 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200 0000:02:06.0: firmware: requesting ipw2200-bss.fw
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
yenta_cardbus 0000:02:04.1: CardBus bridge found [17c0:3007]
yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:04.1: TI: mfunc 0x01aa1b22, devctl 0x64
udev: renamed network interface eth0 to eth1
yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x00f8, PCI irq 10
yenta_cardbus 0000:02:04.1: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x29ffffff
b44 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0a:e4:5b:8a:14
intel8x0_measure_ac97_clock: measured 55922 usecs (2694 samples)
intel8x0: clocking to 48000
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[04e40a005d0a1036]
input: Acer hotkey driver as /devices/virtual/input/input5
Acer Travelmate hotkey driver v0.5.35
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
Adding 1534168k swap on /dev/sda6.  Priority:-1 extents:1 across:1534168k 
ipw2200: Failed to send TX_POWER: Command timed out.
lib80211_crypt: registered algorithm 'WEP'
microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-0d-06
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
microcode: CPU0 updated to revision 0x18, date = 2004-10-17 
Microcode Update Driver: v2.00 removed.
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.17 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 65649 pages)
PM: Allocated 262596 kbytes in 38.15 seconds (6.88 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
eth1: Going into suspend...
ipw2200 0000:02:06.0: PCI INT A disabled
ACPI handle has no context!
b44 0000:02:05.0: PCI INT A disabled
ACPI handle has no context!
tifm_7xx1 0000:02:04.3: PCI INT D disabled
ACPI handle has no context!
ACPI handle has no context!
radeonfb (0000:01:00.0): suspending for event: 1...
Intel ICH 0000:00:1f.5: PCI INT B disabled
pci 0000:00:1f.3: PCI INT B disabled
ata_piix 0000:00:1f.1: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
PM: Creating hibernation image: 
PM: Need to copy 61981 pages
PM: Restoring platform NVS memory
CPU0: Thermal monitoring enabled (TM2)
------------[ cut here ]------------
WARNING: at drivers/base/sys.c:353 __sysdev_resume+0xb9/0xd0()
Hardware name: WIM 2030
Interrupts enabled after irqrouter_resume+0x0/0x3a
Modules linked in: arc4 ecb lib80211_crypt_wep snd_seq snd_seq_device radeon ttm drm_kms_helper drm acpi_cpufreq tun fan acerhk snd_intel8x0 snd_ac97_codec b44 ssb ac97_bus snd_pcm snd_timer ipw2200 snd ohci1394 tifm_7xx1 rtc_cmos yenta_socket libipw rsrc_nonstatic ieee1394 pcmcia_core processor lib80211 snd_page_alloc mii tifm_core evdev ehci_hcd intel_agp rtc_core battery button ac thermal i2c_i801 uhci_hcd rtc_lib agpgart [last unloaded: microcode]
Pid: 1640, comm: pm-hibernate Tainted: G        W  2.6.32-gentoo #2
Call Trace:
 [<c1024f8e>] ? warn_slowpath_common+0x6e/0xb0
 [<c11c4ab9>] ? __sysdev_resume+0xb9/0xd0
 [<c102501b>] ? warn_slowpath_fmt+0x2b/0x30
 [<c11c4ab9>] ? __sysdev_resume+0xb9/0xd0
 [<c11973ad>] ? irqrouter_resume+0x0/0x3a
 [<c11c4b27>] ? sysdev_resume+0x57/0xc0
 [<c104f9f1>] ? hibernate_nvs_restore+0x11/0x70
 [<c104c878>] ? hibernation_snapshot+0x138/0x200
 [<c104bb2c>] ? freeze_processes+0x3c/0x80
 [<c104c9ff>] ? hibernate+0xbf/0x180
 [<c104b5e0>] ? state_store+0x0/0xa0
 [<c104b674>] ? state_store+0x94/0xa0
 [<c104b5e0>] ? state_store+0x0/0xa0
 [<c1140f20>] ? kobj_attr_store+0x20/0x30
 [<c10c8fd9>] ? sysfs_write_file+0x99/0x100
 [<c10c8f40>] ? sysfs_write_file+0x0/0x100
 [<c1086898>] ? vfs_write+0xa8/0x190
 [<c101ab4c>] ? do_page_fault+0xec/0x2f0
 [<c1087151>] ? sys_write+0x41/0x70
 [<c1002d48>] ? sysenter_do_call+0x12/0x26
---[ end trace 4eaa2a86a8e2da24 ]---
ACPI: Waking up from system sleep state S4
pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20020200, writing 0x200a0200)
ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x3c001ff, writing 0x5c001ff)
yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x824010, writing 0x82a810)
yenta_cardbus 0000:02:04.1: restoring config space at offset 0xf (was 0x3c002ff, writing 0x5c002ff)
yenta_cardbus 0000:02:04.1: restoring config space at offset 0x3 (was 0x824000, writing 0x82a810)
tifm_7xx1 0000:02:04.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
ipw2200 0000:02:06.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900006)
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb1: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb3: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: setting latency timer to 64
usb usb4: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
pci 0000:00:1e.0: setting latency timer to 64
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
pci 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
radeonfb (0000:01:00.0): resuming from state: 1...
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[d0209000-d02097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
tifm_7xx1 0000:02:04.3: PCI INT D -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
b44 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
eth1: Coming out of suspend...
ipw2200 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
sd 0:0:0:0: [sda] Starting disk
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
usb 2-2: reset low speed USB device using uhci_hcd and address 2
Restarting tasks ... done.
ipw2200: Failed to send TX_POWER: Command timed out.
lib80211_crypt: registered algorithm 'TKIP'