Linux version 2.6.32-gentoo (root@charlie) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #2 Sat Dec 12 11:40:50 CET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data) BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x1ff70 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 01FF80000 mask FFFF80000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001ff70000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001ff70000 page 4k kernel direct mapping tables up to 1ff70000 @ 10000-15000 ACPI: RSDP 000f6f00 00014 (v00 PTLTD ) ACPI: RSDT 1ff7637d 00030 (v01 PTLTD Wistron 06040000 LTP 00000000) ACPI: FACP 1ff7aed2 00074 (v01 INTEL ODEM 06040000 PTL 00000050) ACPI: DSDT 1ff768a3 0462F (v01 INTEL ODEM 06040000 MSFT 0100000E) ACPI: FACS 1ff7bfc0 00040 ACPI: BOOT 1ff7afd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SSDT 1ff763ad 004EE (v01 INTEL GV3Ref 00001001 MSFT 0100000E) 511MB LOWMEM available. mapped low ram: 0 - 1ff70000 low ram: 0 - 1ff70000 node 0 low ram: 00000000 - 1ff70000 node 0 bootmap 00011000 - 00014ff0 (6 early reservations) ==> bootmem [0000000000 - 001ff70000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00014aece0] TEXT DATA BSS ==> [0001000000 - 00014aece0] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #3 [00014af000 - 00014b5124] BRK ==> [00014af000 - 00014b5124] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0001ff70 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001ff70 On node 0 totalpages: 130815 free_area_init_node: node 0, pgdat c13fad40, node_mem_map c14b6200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125841 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 Local APIC disabled by BIOS -- you can enable it with "lapic" APIC: disable apic facility nr_irqs_gsi: 16 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 20000000:df800000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 Kernel command line: root=/dev/sda5 resume=/dev/sda6 usbcore.autosuspend=0 ec_polled=true PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 513832k/523712k available (2764k kernel code, 9340k reserved, 1322k data, 276k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) vmalloc : 0xe0770000 - 0xfffa2000 ( 504 MB) lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) .init : 0xc13fe000 - 0xc1443000 ( 276 kB) .data : 0xc12b3354 - 0xc13fdf28 (1322 kB) .text : 0xc1000000 - 0xc12b3354 (2764 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:288 CPU 0 irqstacks, hard=c13c7000 soft=c13c8000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 1694.516 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3389.03 BogoMIPS (lpj=6778064) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K mce: CPU supports 5 MCE banks ------------[ cut here ]------------ WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x32/0x40() Hardware name: WIM 2030 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.32-gentoo #2 Call Trace: [] ? warn_slowpath_common+0x6e/0xb0 [] ? native_apic_write_dummy+0x32/0x40 [] ? warn_slowpath_null+0x13/0x20 [] ? native_apic_write_dummy+0x32/0x40 [] ? intel_init_thermal+0xaa/0x1c0 [] ? mce_intel_feature_init+0x8/0x50 [] ? mcheck_init+0x227/0x2a7 [] ? identify_cpu+0x2bd/0x2cb [] ? __delayacct_tsk_init+0x12/0x20 [] ? __delayacct_tsk_init+0x12/0x20 [] ? identify_boot_cpu+0xa/0x1e [] ? check_bugs+0x8/0xe2 [] ? __delayacct_tsk_init+0x12/0x20 [] ? start_kernel+0x220/0x22f [] ? unknown_bootoption+0x0/0x190 ---[ end trace 4eaa2a86a8e2da22 ]--- CPU0: Thermal monitoring enabled (TM2) Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ACPI: setting ELCR to 0200 (from 0c00) devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd7d5, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:04.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: PME# disabled pci 0000:02:04.2: reg 10 32bit mmio: [0xd0209000-0xd02097ff] pci 0000:02:04.2: reg 14 32bit mmio: [0xd0200000-0xd0203fff] pci 0000:02:04.2: supports D1 D2 pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot pci 0000:02:04.2: PME# disabled pci 0000:02:04.3: reg 10 32bit mmio: [0xd0204000-0xd0205fff] pci 0000:02:04.3: supports D1 D2 pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot pci 0000:02:04.3: PME# disabled pci 0000:02:05.0: reg 10 32bit mmio: [0xd0206000-0xd0207fff] pci 0000:02:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:02:05.0: supports D1 D2 pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:02:06.0: reg 10 32bit mmio: [0xd0208000-0xd0208fff] pci 0000:02:06.0: PME# supported from D0 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd02fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:04: ioport range 0x200-0x20f has been reserved system 00:04: ioport range 0x600-0x61f has been reserved system 00:04: ioport range 0x700-0x70f has been reserved system 00:04: ioport range 0x800-0x80f has been reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1180-0x11bf has been reserved system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:04.0: IO window: 0x004000-0x0040ff pci 0000:02:04.0: IO window: 0x004400-0x0044ff pci 0000:02:04.0: PREFETCH window: 0x20000000-0x23ffffff pci 0000:02:04.0: MEM window: 0x2c000000-0x2fffffff pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07 pci 0000:02:04.1: IO window: 0x004800-0x0048ff pci 0000:02:04.1: IO window: 0x004c00-0x004cff pci 0000:02:04.1: PREFETCH window: 0x24000000-0x27ffffff pci 0000:02:04.1: MEM window: 0x30000000-0x33ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x4000-0x4fff pci 0000:00:1e.0: MEM window: 0xd0200000-0xd02fffff pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x29ffffff pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:04.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pci 0000:02:04.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd02fffff] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x29ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff] pci_bus 0000:03: resource 3 mem: [0x2c000000-0x2fffffff] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff] pci_bus 0000:07: resource 2 pref mem [0x24000000-0x27ffffff] pci_bus 0000:07: resource 3 mem: [0x30000000-0x33ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Simple Boot Flag at 0x36 set to 0x1 HugeTLB registered 4 MB page size, pre-allocated 0 pages msgmni has been set to 1003 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=400.00 Mhz, System=215.00 MHz radeonfb: PLL min 20000 max 40000 radeonfb: Reversed DACs detected i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1024x768 radeonfb: detected LVDS panel size from BIOS: 1024x768 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 128x48 radeonfb (0000:01:00.0): ATI Radeon 4e50 "NP" Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 serial 0000:00:1f.6: PCI INT B disabled loop: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode ata2.00: ATAPI: PIONEER DVD-RW DVR-K14L, 1.00, max UDMA/33 ata1.00: ATA-5: HITACHI_DK23FA-80, 00M3A0A2, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FA-8 00M3 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K14L 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 registered taskstats version 1 EXT3-fs: sda5: couldn't mount because of unsupported optional features (40). EXT2-fs: sda5: couldn't mount because of unsupported optional features (40). EXT4-fs (sda5): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:5. Freeing unused kernel memory: 276k freed udev: starting version 149 Linux agpgart interface v0.103 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: I/O resource 0000:00:1f.3 [0x1880-0x189f] conflicts with ACPI region SBUS [0x1880-0x188f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI: AC Adapter [ADP1] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected agpgart-intel 0000:00:00.0: Intel 855PM Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' Marking TSC unstable due to TSC halts in idle Switching to clocksource acpi_pm thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRC] (28 C) processor LNXCPU:00: registered as cooling_device0 thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THRS] (17 C) ACPI: Battery Slot [BAT0] (battery present) input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation usb 2-2: new low speed USB device using uhci_hcd and address 2 yenta_cardbus 0000:02:04.0: CardBus bridge found [17c0:3007] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:04.0: TI: mfunc 0x01aa1b22, devctl 0x64 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k ipw2200: Copyright(c) 2003-2006 Intel Corporation usb 2-2: configuration #1 chosen from 1 choice yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x00f8, PCI irq 11 yenta_cardbus 0000:02:04.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x29ffffff tifm_7xx1 0000:02:04.3: enabling device (0000 -> 0002) tifm_7xx1 0000:02:04.3: PCI INT D -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ohci1394 0000:02:04.2: PCI INT C -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[d0209000-d02097ff] Max Packet=[2048] IR/IT contexts=[4/8] ipw2200 0000:02:06.0: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ipw2200 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200 0000:02:06.0: firmware: requesting ipw2200-bss.fw Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 Intel ICH 0000:00:1f.5: setting latency timer to 64 ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) yenta_cardbus 0000:02:04.1: CardBus bridge found [17c0:3007] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:04.1: TI: mfunc 0x01aa1b22, devctl 0x64 udev: renamed network interface eth0 to eth1 yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x00f8, PCI irq 10 yenta_cardbus 0000:02:04.1: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x29ffffff b44 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0a:e4:5b:8a:14 intel8x0_measure_ac97_clock: measured 55922 usecs (2694 samples) intel8x0: clocking to 48000 ieee1394: Host added: ID:BUS[0-00:1023] GUID[04e40a005d0a1036] input: Acer hotkey driver as /devices/virtual/input/input5 Acer Travelmate hotkey driver v0.5.35 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. Adding 1534168k swap on /dev/sda6. Priority:-1 extents:1 across:1534168k ipw2200: Failed to send TX_POWER: Command timed out. lib80211_crypt: registered algorithm 'WEP' microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17 platform microcode: firmware: requesting intel-ucode/06-0d-06 Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x18, date = 2004-10-17 Microcode Update Driver: v2.00 removed. CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.17 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Preallocating image memory... done (allocated 65649 pages) PM: Allocated 262596 kbytes in 38.15 seconds (6.88 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache eth1: Going into suspend... ipw2200 0000:02:06.0: PCI INT A disabled ACPI handle has no context! b44 0000:02:05.0: PCI INT A disabled ACPI handle has no context! tifm_7xx1 0000:02:04.3: PCI INT D disabled ACPI handle has no context! ACPI handle has no context! radeonfb (0000:01:00.0): suspending for event: 1... Intel ICH 0000:00:1f.5: PCI INT B disabled pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory PM: Creating hibernation image: PM: Need to copy 61981 pages PM: Restoring platform NVS memory CPU0: Thermal monitoring enabled (TM2) ------------[ cut here ]------------ WARNING: at drivers/base/sys.c:353 __sysdev_resume+0xb9/0xd0() Hardware name: WIM 2030 Interrupts enabled after irqrouter_resume+0x0/0x3a Modules linked in: arc4 ecb lib80211_crypt_wep snd_seq snd_seq_device radeon ttm drm_kms_helper drm acpi_cpufreq tun fan acerhk snd_intel8x0 snd_ac97_codec b44 ssb ac97_bus snd_pcm snd_timer ipw2200 snd ohci1394 tifm_7xx1 rtc_cmos yenta_socket libipw rsrc_nonstatic ieee1394 pcmcia_core processor lib80211 snd_page_alloc mii tifm_core evdev ehci_hcd intel_agp rtc_core battery button ac thermal i2c_i801 uhci_hcd rtc_lib agpgart [last unloaded: microcode] Pid: 1640, comm: pm-hibernate Tainted: G W 2.6.32-gentoo #2 Call Trace: [] ? warn_slowpath_common+0x6e/0xb0 [] ? __sysdev_resume+0xb9/0xd0 [] ? warn_slowpath_fmt+0x2b/0x30 [] ? __sysdev_resume+0xb9/0xd0 [] ? irqrouter_resume+0x0/0x3a [] ? sysdev_resume+0x57/0xc0 [] ? hibernate_nvs_restore+0x11/0x70 [] ? hibernation_snapshot+0x138/0x200 [] ? freeze_processes+0x3c/0x80 [] ? hibernate+0xbf/0x180 [] ? state_store+0x0/0xa0 [] ? state_store+0x94/0xa0 [] ? state_store+0x0/0xa0 [] ? kobj_attr_store+0x20/0x30 [] ? sysfs_write_file+0x99/0x100 [] ? sysfs_write_file+0x0/0x100 [] ? vfs_write+0xa8/0x190 [] ? do_page_fault+0xec/0x2f0 [] ? sys_write+0x41/0x70 [] ? sysenter_do_call+0x12/0x26 ---[ end trace 4eaa2a86a8e2da24 ]--- ACPI: Waking up from system sleep state S4 pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20020200, writing 0x200a0200) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007) Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003) yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x3c001ff, writing 0x5c001ff) yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x824010, writing 0x82a810) yenta_cardbus 0000:02:04.1: restoring config space at offset 0xf (was 0x3c002ff, writing 0x5c002ff) yenta_cardbus 0000:02:04.1: restoring config space at offset 0x3 (was 0x824000, writing 0x82a810) tifm_7xx1 0000:02:04.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) ipw2200 0000:02:06.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900006) uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb1: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb3: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ata_piix 0000:00:1f.1: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 Intel ICH 0000:00:1f.5: setting latency timer to 64 ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/100 radeonfb (0000:01:00.0): resuming from state: 1... ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[d0209000-d02097ff] Max Packet=[2048] IR/IT contexts=[4/8] tifm_7xx1 0000:02:04.3: PCI INT D -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 b44 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 eth1: Coming out of suspend... ipw2200 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 sd 0:0:0:0: [sda] Starting disk ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. usb 2-2: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. ipw2200: Failed to send TX_POWER: Command timed out. lib80211_crypt: registered algorithm 'TKIP'