Linux version 2.4.20-gentoo-r8 (root@orthanc.st.hmc.edu) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #1 Tue Oct 28 20:38:30 PST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: RSDP (v000 761686 ) @ 0x000f6810 ACPI: RSDT (v001 761686 AWRDACPI 16944.11825) @ 0x1fff3000 ACPI: FADT (v001 761686 AWRDACPI 16944.11825) @ 0x1fff3040 ACPI: DSDT (v001 761686 AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Kernel command line: root=/dev/evms/root Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1401.820 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2791.83 BogoMIPS Memory: 512004k/524224k available (1932k kernel code, 9660k reserved, 318k data, 132k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU: AMD Athlon(tm) 4 processor stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1401.4010 MHz. ..... host bus clock speed is 267.0049 MHz. cpu: 0, clocks: 1335049, slice: 667524 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021122 PCI: PCI BIOS revision 2.10 entry at 0xfb5e0, last bus=1 PCI: Using configuration type 1 ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA CMD649: IDE controller on PCI bus 00 dev 68 CMD649: chipset revision 2 CMD649: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:pio, hdh:pio PDC20267: IDE controller on PCI bus 00 dev 78 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide4: BM-DMA at 0xe000-0xe007, BIOS settings: hdi:DMA, hdj:DMA ide5: BM-DMA at 0xe008-0xe00f, BIOS settings: hdk:pio, hdl:pio hdb: WDC WD1200JB-75CRA0, ATA DISK drive hdc: TDK CDRW241040X, ATAPI CD/DVD-ROM drive hdd: DVDROM 10X, ATAPI CD/DVD-ROM drive hde: IC35L060AVV207-0, ATA DISK drive hdg: IC35L060AVER07-0, ATA DISK drive hdi: MAXTOR 6L080L4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xbc00-0xbc07,0xc002 on irq 11 ide3 at 0xc400-0xc407,0xc802 on irq 11 ide4 at 0xd000-0xd007,0xd402 on irq 11 blk: queue c0180524, I/O limit 4095Mb (mask 0xffffffff) hdb: setmax LBA 234441648, native 234375000 hdb: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(100) blk: queue c0180a7c, I/O limit 4095Mb (mask 0xffffffff) hde: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100) blk: queue c0180dc8, I/O limit 4095Mb (mask 0xffffffff) hdg: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(100) blk: queue c0181114, I/O limit 4095Mb (mask 0xffffffff) hdi: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target1/lun0: p1 p2 p4 < p5 > /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 /dev/ide/host2/bus1/target0/lun0: p1 p2 p3 /dev/ide/host4/bus0/target0/lun0: p1 p2 p3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected AMD 761 chipset agpgart: AGP aperture is 64M @ 0xd8000000 usb.c: registered new driver usbdevfs usb.c: registered new driver hub evms: md raid5: measuring checksumming speed evms: md raid5: 8regs : 2138.400 MB/sec evms: md raid5: 32regs : 1552.000 MB/sec evms: md raid5: pIII_sse : 3974.400 MB/sec evms: md raid5: pII_mmx : 3281.600 MB/sec evms: md raid5: p5_mmx : 4210.400 MB/sec evms: md raid5: using function: pIII_sse (3974.400 MB/sec) evms: EVMS v1.2.1 initializing .... info level(5). evms: md raid5: raid5_run: device hdb2 operational as raid disk 0 evms: md raid5: raid5_run: device hde2 operational as raid disk 1 evms: md raid5: raid5_run: device hdg2 operational as raid disk 2 evms: md raid5: raid5_run: device hdi2 operational as raid disk 3 evms: md raid5: RAID5 conf printout: evms: md raid5: --- rd:4 wd:4 fd:0 evms: md raid5: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdb2 evms: md raid5: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde2 evms: md raid5: disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdg2 evms: md raid5: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdi2 evms: md raid5: RAID5 conf printout: evms: md raid5: --- rd:4 wd:4 fd:0 evms: md raid5: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdb2 evms: md raid5: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde2 evms: md raid5: disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdg2 evms: md raid5: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdi2 evms: Exporting EVMS Volume(117,253) from "/dev/evms/swap2". evms: Exporting EVMS Volume(117,252) from "/dev/evms/swap3". evms: Exporting EVMS Volume(117,251) from "/dev/evms/swap4". evms: Exporting EVMS Volume(117,250) from "/dev/evms/storage". evms: Exporting EVMS Volume(117,255) from "/dev/evms/root". evms: Exporting EVMS Volume(117,1) from "/dev/evms/hdb1". NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 75:ff) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 132k freed Adding Swap: 249944k swap-space (priority -1) Adding Swap: 249944k swap-space (priority -2) 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 spurious 8259A interrupt: IRQ7. reiserfs: checking transaction log (device 75:fa) ... Using r5 hash to sort names ReiserFS version 3.6.25 Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002) eth0: ADMtek Comet rev 17 at 0xb800, 00:04:5A:8F:4A:D6, IRQ 10. uhci.c: USB Universal Host Controller Interface driver v1.1 uhci.c: USB UHCI at I/O 0xa800, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB UHCI at I/O 0xac00, IRQ 10 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected parport0: PC-style at 0x378 [PCSPP(,...)] parport_pc: Via 686A parallel port: io=0x378 hub.c: new USB device 00:07.2-2, assigned address 2 usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active driver. usb.c: registered new driver hiddev usb.c: registered new driver hid input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb1:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice /dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-2242 $ /dev/vmmon: Module vmmon: initialized /dev/vmnet: open called by PID 1931 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached /dev/vmnet: open called by PID 1961 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TDK Model: CDRW241040X Rev: 6.34 Type: CD-ROM ANSI SCSI revision: 02 Vendor: DVDROM 1 Model: 0X Rev: 40 Type: CD-ROM ANSI SCSI revision: 02 /dev/vmnet: open called by PID 2837 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 2853 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray /dev/vmnet: open called by PID 3329 (vmware) /dev/vmnet: port on hub 8 successfully opened end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 2 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 4 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 6 end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 2 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 4 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 6 end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 2 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 4 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 6 end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 2 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 4 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 6 end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 2 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 4 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 6 end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 2 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 4 floppy0: disk absent or changed during operation end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 6 /dev/vmmon: Vmx86_ReleaseVM: unlocked pages: 68910, unlocked dirty pages: 57559