nvidia bug report

nvidia-bug-report.log (text/plain), 110.15 KB, created by Pavel Volkov on 2009-11-13 08:03:15 UTC

____________________________________________

Start of NVIDIA bug report log file.  Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'[e-mail]'.

nvidia-bug-report.sh Version: 4401223

Date: Птн Ноя 13 10:57:45 MSK 2009
uname: Linux melforce 2.6.31-gentoo-r4melf #1 SMP Thu Oct 29 10:26:31 MSK 2009 x86_64 AMD Phenom(tm) 9650 Quad-Core Processor AuthenticAMD GNU/Linux

____________________________________________

/etc/issue

This is \n.\O (\s \m \r) \t


____________________________________________

/etc/gentoo-release
Gentoo Base System release 2.0.1

____________________________________________

/var/log/nvidia-installer.log does not exist

____________________________________________

/var/log/XFree86.0.log does not exist

____________________________________________

/var/log/XFree86.0.log.old does not exist

____________________________________________

/var/log/Xorg.0.log

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r4melf x86_64 
Current Operating System: Linux melforce 2.6.31-gentoo-r4melf #1 SMP Thu Oct 29 10:26:31 MSK 2009 x86_64
Kernel command line: root=/dev/sda2 vga=0x317 splash=verbose,theme:emergence console=tty1
Build Date: 10 November 2009  07:37:41PM
 
Current version of pixman: 0.16.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 13 10:51:35 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7c2480
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0421:1462:0960 nVidia Corporation G86 [GeForce 8500 GT] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TripleBuffer" "1"
(**) NVIDIA(0): Option "UseEvents" "True"
(**) NVIDIA(0): Option "DamageEvents" "1"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "6000000"
(**) NVIDIA(0): Option "AllowSHMPixmaps" "0"
(**) Nov 13 10:51:38 NVIDIA(0): Enabling RENDER acceleration
(II) Nov 13 10:51:38 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Nov 13 10:51:38 NVIDIA(0):     enabled.
(II) Nov 13 10:51:39 NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
(--) Nov 13 10:51:39 NVIDIA(0): Memory: 524288 kBytes
(--) Nov 13 10:51:39 NVIDIA(0): VideoBIOS: 60.86.26.00.09
(II) Nov 13 10:51:39 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Nov 13 10:51:39 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Nov 13 10:51:39 NVIDIA(0): Connected display device(s) on GeForce 8500 GT at PCI:1:0:0:
(--) Nov 13 10:51:39 NVIDIA(0):     Acer P203W (DFP-0)
(--) Nov 13 10:51:39 NVIDIA(0): Acer P203W (DFP-0): 330.0 MHz maximum pixel clock
(--) Nov 13 10:51:39 NVIDIA(0): Acer P203W (DFP-0): Internal Dual Link TMDS
(II) Nov 13 10:51:39 NVIDIA(0): Assigned Display Device: DFP-0
(==) Nov 13 10:51:39 NVIDIA(0): 
(==) Nov 13 10:51:39 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Nov 13 10:51:39 NVIDIA(0):     will be used as the requested mode.
(==) Nov 13 10:51:39 NVIDIA(0): 
(II) Nov 13 10:51:39 NVIDIA(0): Validated modes:
(II) Nov 13 10:51:39 NVIDIA(0):     "nvidia-auto-select"
(II) Nov 13 10:51:39 NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) Nov 13 10:51:39 NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) Nov 13 10:51:39 NVIDIA(0):     option
(==) Nov 13 10:51:39 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Nov 13 10:51:39 NVIDIA(0): Initialized GPU GART.
(II) Nov 13 10:51:39 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Nov 13 10:51:39 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Nov 13 10:51:39 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) config/hal: Adding input device HID 0566:3107
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 2.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) HID 0566:3107: always reports core events
(**) HID 0566:3107: Device: "/dev/input/event4"
(II) HID 0566:3107: Found 1 mouse buttons
(II) HID 0566:3107: Found scroll wheel(s)
(II) HID 0566:3107: Found relative axes
(II) HID 0566:3107: Found absolute axes
(II) HID 0566:3107: Found keys
(II) HID 0566:3107: Configuring as mouse
(II) HID 0566:3107: Configuring as keyboard
(**) HID 0566:3107: YAxisMapping: buttons 4 and 5
(**) HID 0566:3107: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 0566:3107" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(EE) HID 0566:3107: failed to initialize for relative axes.
(**) HID 0566:3107: (accel) keeping acceleration scheme 1
(**) HID 0566:3107: (accel) acceleration profile 0
(II) HID 0566:3107: initialized for absolute axes.
(II) config/hal: Adding input device HID 0566:3107
(**) HID 0566:3107: always reports core events
(**) HID 0566:3107: Device: "/dev/input/event3"
(II) HID 0566:3107: Found keys
(II) HID 0566:3107: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 0566:3107" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
(II) Logitech USB-PS/2 Optical Mouse: Found 8 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"

____________________________________________

/etc/X11/xorg.conf
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "glx"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    #VendorName     "Unknown"
    #ModelName      "Unknown"
    #HorizSync       30.0 - 110.0
    #VertRefresh     50.0 - 150.0
    #Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "NoLogo" "True"
    Option         "PixmapCacheSize" "6000000"
    Option         "OnDemandVBlankInterrupts" "True"
    Option         "AllowSHMPixmaps"          "0"
    Option         "RenderAccel" "True"
    Option         "UseEvents" "True"
    Option         "TripleBuffer" "1"
    Option         "DamageEvents" "1"
    #Option         "BackingStore" "1"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
   Option "Composite" "Enable"
EndSection


____________________________________________

/var/log/Xorg.0.log.old

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r4melf x86_64 
Current Operating System: Linux melforce 2.6.31-gentoo-r4melf #1 SMP Thu Oct 29 10:26:31 MSK 2009 x86_64
Kernel command line: root=/dev/sda2 vga=0x317 splash=verbose,theme:emergence console=tty1
Build Date: 10 November 2009  07:37:41PM
 
Current version of pixman: 0.16.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 12 10:17:17 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7c2480
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0421:1462:0960 nVidia Corporation G86 [GeForce 8500 GT] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TripleBuffer" "1"
(**) NVIDIA(0): Option "UseEvents" "True"
(**) NVIDIA(0): Option "DamageEvents" "1"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "6000000"
(**) NVIDIA(0): Option "AllowSHMPixmaps" "0"
(**) Nov 12 10:17:19 NVIDIA(0): Enabling RENDER acceleration
(II) Nov 12 10:17:19 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Nov 12 10:17:19 NVIDIA(0):     enabled.
(II) Nov 12 10:17:19 NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
(--) Nov 12 10:17:19 NVIDIA(0): Memory: 524288 kBytes
(--) Nov 12 10:17:19 NVIDIA(0): VideoBIOS: 60.86.26.00.09
(II) Nov 12 10:17:19 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Nov 12 10:17:19 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Nov 12 10:17:19 NVIDIA(0): Connected display device(s) on GeForce 8500 GT at PCI:1:0:0:
(--) Nov 12 10:17:19 NVIDIA(0):     Acer P203W (DFP-0)
(--) Nov 12 10:17:19 NVIDIA(0): Acer P203W (DFP-0): 330.0 MHz maximum pixel clock
(--) Nov 12 10:17:19 NVIDIA(0): Acer P203W (DFP-0): Internal Dual Link TMDS
(II) Nov 12 10:17:19 NVIDIA(0): Assigned Display Device: DFP-0
(==) Nov 12 10:17:19 NVIDIA(0): 
(==) Nov 12 10:17:19 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Nov 12 10:17:19 NVIDIA(0):     will be used as the requested mode.
(==) Nov 12 10:17:19 NVIDIA(0): 
(II) Nov 12 10:17:19 NVIDIA(0): Validated modes:
(II) Nov 12 10:17:19 NVIDIA(0):     "nvidia-auto-select"
(II) Nov 12 10:17:19 NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) Nov 12 10:17:19 NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) Nov 12 10:17:19 NVIDIA(0):     option
(==) Nov 12 10:17:19 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Nov 12 10:17:19 NVIDIA(0): Initialized GPU GART.
(II) Nov 12 10:17:19 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Nov 12 10:17:19 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Nov 12 10:17:19 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) config/hal: Adding input device HID 0566:3107
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 2.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) HID 0566:3107: always reports core events
(**) HID 0566:3107: Device: "/dev/input/event4"
(II) HID 0566:3107: Found 1 mouse buttons
(II) HID 0566:3107: Found scroll wheel(s)
(II) HID 0566:3107: Found relative axes
(II) HID 0566:3107: Found absolute axes
(II) HID 0566:3107: Found keys
(II) HID 0566:3107: Configuring as mouse
(II) HID 0566:3107: Configuring as keyboard
(**) HID 0566:3107: YAxisMapping: buttons 4 and 5
(**) HID 0566:3107: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 0566:3107" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(EE) HID 0566:3107: failed to initialize for relative axes.
(**) HID 0566:3107: (accel) keeping acceleration scheme 1
(**) HID 0566:3107: (accel) acceleration profile 0
(II) HID 0566:3107: initialized for absolute axes.
(II) config/hal: Adding input device HID 0566:3107
(**) HID 0566:3107: always reports core events
(**) HID 0566:3107: Device: "/dev/input/event3"
(II) HID 0566:3107: Found keys
(II) HID 0566:3107: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 0566:3107" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
(II) Logitech USB-PS/2 Optical Mouse: Found 8 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) HID 0566:3107: Close
(II) UnloadModule: "evdev"
(II) HID 0566:3107: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"

____________________________________________

/etc/X11/xorg.conf
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "glx"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    #VendorName     "Unknown"
    #ModelName      "Unknown"
    #HorizSync       30.0 - 110.0
    #VertRefresh     50.0 - 150.0
    #Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "NoLogo" "True"
    Option         "PixmapCacheSize" "6000000"
    Option         "OnDemandVBlankInterrupts" "True"
    Option         "AllowSHMPixmaps"          "0"
    Option         "RenderAccel" "True"
    Option         "UseEvents" "True"
    Option         "TripleBuffer" "1"
    Option         "DamageEvents" "1"
    #Option         "BackingStore" "1"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
   Option "Composite" "Enable"
EndSection


____________________________________________

ldd /usr/bin/glxinfo

	linux-vdso.so.1 =>  (0x00007fff6c9ff000)
	libGL.so.1 => //usr/lib64/opengl/nvidia/lib/libGL.so.1 (0x00007f224f74e000)
	libm.so.6 => /lib/libm.so.6 (0x00007f224f4cc000)
	libc.so.6 => /lib/libc.so.6 (0x00007f224f172000)
	libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f224ee31000)
	libGLcore.so.1 => //usr/lib64/opengl/nvidia/lib/libGLcore.so.1 (0x00007f224d9d4000)
	libnvidia-tls.so.1 => //usr/lib64/opengl/nvidia/lib/libnvidia-tls.so.1 (0x00007f224fa35000)
	libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f224d7c1000)
	libdl.so.2 => /lib/libdl.so.2 (0x00007f224d5bd000)
	/lib64/ld-linux-x86-64.so.2 (0x00007f224f946000)
	libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f224d3b9000)
	libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f224d1b3000)

____________________________________________

/usr/sbin/lspci -d "10de:*" -v -xxx

01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. NX8500GT-TD512EH/M2
	Flags: bus master, fast devsel, latency 0, IRQ 18
	Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at ef00 [size=128]
	[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [78] Express Endpoint, MSI 00
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Capabilities: [600] Vendor Specific Information <?>
	Kernel driver in use: nvidia
	Kernel modules: nvidia
00: de 10 21 04 07 00 10 00 a1 00 00 03 00 00 00 00
10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 f8
20: 00 00 00 00 01 ef 00 00 00 00 00 00 62 14 60 09
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
40: 62 14 60 09 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 29 00 00 01 3d 01 00 48 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


____________________________________________

/usr/sbin/lspci -t

-[0000:00]-+-00.0
           +-02.0-[01]----00.0
           +-0a.0-[02]----00.0
           +-11.0
           +-12.0
           +-12.1
           +-12.2
           +-13.0
           +-13.1
           +-13.2
           +-14.0
           +-14.1
           +-14.2
           +-14.3
           +-14.4-[03]--+-07.0
           |            \-0e.0
           +-14.5
           +-18.0
           +-18.1
           +-18.2
           +-18.3
           \-18.4

____________________________________________

/usr/sbin/dmidecode

# dmidecode 2.10
SMBIOS 2.3 present.
54 structures occupying 2377 bytes.
Table at 0x000F0100.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
	Vendor: Award Software International, Inc.
	Version: FA
	Release Date: 07/14/2008
	Address: 0xE0000
	Runtime Size: 128 kB
	ROM Size: 1024 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/360 kB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		LS-120 boot is supported
		ATAPI Zip drive boot is supported
		BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
	Manufacturer:  
	Product Name:  
	Version:  
	Serial Number:  
	UUID: Not Present
	Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: Gigabyte Technology Co., Ltd.
	Product Name: GA-MA770-DS3
	Version: x.x
	Serial Number:  

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
	Manufacturer:  
	Type: Desktop
	Lock: Not Present
	Version:  
	Serial Number:  
	Asset Tag:  
	Boot-up State: Unknown
	Power Supply State: Unknown
	Thermal State: Unknown
	Security Status: Unknown
	OEM Information: 0x00000000

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
	Socket Designation: Socket M2
	Type: Central Processor
	Family: Athlon
	Manufacturer: AMD
	ID: 23 0F 10 00 FF FB 8B 17
	Signature: Family 16, Model 2, Stepping 3
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		HTT (Hyper-threading technology)
	Version: AMD Phenom(tm) 9650 Quad-Core Processor
	Voltage: 1.3 V
	External Clock: 200 MHz
	Max Speed: 3200 MHz
	Current Speed: 2300 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x000B
	L2 Cache Handle: 0x000D
	L3 Cache Handle: Not Provided
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0005, DMI type 4, 35 bytes
Processor Information
	Socket Designation: Socket M2
	Type: Central Processor
	Family: Athlon
	Manufacturer: AMD
	ID: 23 0F 10 00 FF FB 8B 17
	Signature: Family 16, Model 2, Stepping 3
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		HTT (Hyper-threading technology)
	Version: AMD Phenom(tm) 9650 Quad-Core Processor
	Voltage: 1.3 V
	External Clock: 200 MHz
	Max Speed: 3200 MHz
	Current Speed: 2300 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x000C
	L2 Cache Handle: 0x000E
	L3 Cache Handle: Not Provided
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0006, DMI type 5, 24 bytes
Memory Controller Information
	Error Detecting Method: 64-bit ECC
	Error Correcting Capabilities:
		None
	Supported Interleave: One-way Interleave
	Current Interleave: One-way Interleave
	Maximum Memory Module Size: 1024 MB
	Maximum Total Memory Size: 4096 MB
	Supported Speeds:
		70 ns
		60 ns
	Supported Memory Types:
		Standard
		EDO
	Memory Module Voltage: 3.3 V
	Associated Memory Slots: 4
		0x0007
		0x0008
		0x0009
		0x000A
	Enabled Error Correcting Capabilities:
		None

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A0
	Bank Connections: 1
	Current Speed: 32 ns
	Type: Other Unknown EDO
	Installed Size: 2048 MB (Double-bank Connection)
	Enabled Size: 2048 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A1
	Bank Connections: 2
	Current Speed: 32 ns
	Type: Other Unknown EDO
	Installed Size: 2048 MB (Double-bank Connection)
	Enabled Size: 2048 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A2
	Bank Connections: 3
	Current Speed: 32 ns
	Type: Other Unknown EDO
	Installed Size: Not Installed
	Enabled Size: Not Installed
	Error Status: OK

Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A3
	Bank Connections: 4
	Current Speed: 32 ns
	Type: Other Unknown EDO
	Installed Size: Not Installed
	Enabled Size: Not Installed
	Error Status: OK

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Internal Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 128 kB
	Maximum Size: 128 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000C, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Internal Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 128 kB
	Maximum Size: 128 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000D, DMI type 7, 19 bytes
Cache Information
	Socket Designation: External Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 512 kB
	Maximum Size: 512 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000E, DMI type 7, 19 bytes
Cache Information
	Socket Designation: External Cache
	Configuration: Disabled, Not Socketed, Level 2
	Operational Mode: Write Through
	Location: Internal
	Installed Size: 0 kB
	Maximum Size: 1024 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PRIMARY IDE
	Internal Connector Type: On Board IDE
	External Reference Designator:  
	External Connector Type: None
	Port Type: Other

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FDD
	Internal Connector Type: On Board Floppy
	External Reference Designator:  
	External Connector Type: None
	Port Type: 8251 FIFO Compatible

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM1
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator:  
	External Connector Type: DB-9 male
	Port Type: Serial Port 16450 Compatible

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM2
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator:  
	External Connector Type: DB-9 male
	Port Type: Serial Port 16450 Compatible

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LPT1
	Internal Connector Type: DB-25 female
	External Reference Designator:  
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Keyboard
	Internal Connector Type: Other
	External Reference Designator:  
	External Connector Type: PS/2
	Port Type: Keyboard Port

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PS/2 Mouse
	Internal Connector Type: PS/2
	External Reference Designator: Detected
	External Connector Type: PS/2
	Port Type: Mouse Port

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0022, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Long
	ID: 7
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported

Handle 0x0023, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 6
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported

Handle 0x0024, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI Express x16
	Type: x16 PCI Express
	Current Usage: Unknown
	Length: Other
	ID: 0
	Characteristics:
		3.3 V is provided

Handle 0x0025, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 3
		n|US|iso8859-1
		n|US|iso8859-1
		r|CA|iso8859-1
	Currently Installed Language: n|US|iso8859-1

Handle 0x0026, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 2 GB
	Error Information Handle: Not Provided
	Number Of Devices: 4

Handle 0x0027, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0026
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: A0
	Bank Locator: Bank0/1
	Type: Unknown
	Type Detail: None
	Speed: 800 MHz
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0028, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0026
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: A1
	Bank Locator: Bank2/3
	Type: Unknown
	Type Detail: None
	Speed: 800 MHz
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0029, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0026
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: A2
	Bank Locator: Bank4/5
	Type: Unknown
	Type Detail: None
	Speed: 800 MHz
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x002A, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0026
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: A3
	Bank Locator: Bank6/7
	Type: Unknown
	Type Detail: None
	Speed: 800 MHz
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x002B, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 4 GB
	Physical Array Handle: 0x0026
	Partition Width: 32

Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 2 GB
	Physical Device Handle: 0x0027
	Memory Array Mapped Address Handle: 0x002B
	Partition Row Position: 1

Handle 0x002D, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00080000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 2 GB
	Physical Device Handle: 0x0028
	Memory Array Mapped Address Handle: 0x002B
	Partition Row Position: 1

Handle 0x002E, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000000003FF
	Range Size: 1 kB
	Physical Device Handle: 0x0029
	Memory Array Mapped Address Handle: 0x002B
	Partition Row Position: 1

Handle 0x002F, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000000003FF
	Range Size: 1 kB
	Physical Device Handle: 0x002A
	Memory Array Mapped Address Handle: 0x002B
	Partition Row Position: 1

Handle 0x0030, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected

Handle 0x0031, DMI type 188, 244 bytes
OEM-specific Type
	Header and Data:
		BC F4 31 00 00 00 00 D0 00 00 00 00 00 00 00 30
		01 00 00 00 00 06 76 00 00 00 00 00 08 00 00 00
		00 40 40 00 10 00 01 00 03 00 00 00 00 00 2F 01
		00 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00
		00 00 00 00 03 00 00 00 00 00 00 00 04 00 00 00
		00 00 00 00 05 00 00 00 00 00 00 00 06 00 00 00
		00 00 00 00 07 00 00 00 03 30 00 D0 13 C0 00 00
		00 F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 03
		01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		E0 3E 78 00 00 00 00 00 00 00 00 00 00 00 00 00
		05 00 C0 0D 00 00 00 00 05 00 00 00 00 00 00 00
		24 FA 7C 5D 34 03 22 00 10 00 01 00 00 02 00 00
		00 00 00 00 44 00 90 0A 0B 00 58 7F 00 00 00 00
		00 00 00 00

Handle 0x0032, DMI type 190, 212 bytes
OEM-specific Type
	Header and Data:
		BE D4 32 00 84 05 00 00 00 00 00 00 24 A4 40 04
		C0 0F E4 2F 01 00 00 00 01 01 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 E0 3E 78 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 05 00 C0 0D
		00 00 00 00 00 00 00 00 25 00 00 00 00 00 00 00
		00 00 00 00 06 AD A0 32 00 02 00 00 00 00 00 00
		00 00 00 00 05 00 00 00 00 00 00 00 24 FA 7C 5D
		34 03 22 00 10 00 01 00 0B 00 58 7F 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00

Handle 0x0033, DMI type 192, 244 bytes
OEM-specific Type
	Header and Data:
		C0 F4 33 00 05 00 00 00 22 32 11 20 20 25 20 00
		E7 88 71 0E FC 00 0E 00 22 32 11 20 10 10 11 10
		10 10 11 10 10 10 11 10 0F 10 10 10 0F 10 10 10
		0F 10 10 10 10 00 10 20 25 20 00 14 12 12 12 14
		12 12 12 14 12 12 12 12 12 12 12 12 12 12 12 12
		12 12 12 14 00 14 88 20 92 0A FC 00 0E 00 50 00
		4D 00 4A 00 47 00 50 00 10 00 0D 00 0A 00 07 00
		00 00 10 00 0D 00 0A 00 07 00 00 00 10 00 0D 00
		0A 00 07 00 00 00 47 00 48 00 4D 00 51 00 00 00
		07 00 08 00 0D 00 11 00 00 00 07 00 08 00 0D 00
		11 00 00 00 07 00 08 00 0D 00 11 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 17 17 16 16 16 15 17 17 16 00 00 00
		53 01 00 00 DC 01 00 00 DC 01 00 00 DC 01 00 00
		00 00 00 00

Handle 0x0034, DMI type 194, 244 bytes
OEM-specific Type
	Header and Data:
		C2 F4 34 00 05 00 00 00 22 32 11 20 20 25 20 00
		89 24 92 0A FC 00 0E 00 22 32 11 20 11 0F 10 10
		11 0F 10 10 11 0F 10 10 10 10 0F 10 10 10 0F 10
		10 10 0F 10 11 00 11 20 25 20 00 12 12 12 12 12
		12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
		12 12 12 12 00 12 89 24 B2 0A FC 00 0E 00 55 00
		51 00 4F 00 4A 00 55 00 15 00 11 00 0F 00 0A 00
		00 00 15 00 11 00 0F 00 0A 00 00 00 15 00 11 00
		0F 00 0A 00 00 00 4B 00 4E 00 52 00 54 00 00 00
		0B 00 0E 00 12 00 14 00 00 00 0B 00 0E 00 12 00
		14 00 00 00 0B 00 0E 00 12 00 14 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 18 16 16 16 15 15 17 19 15 00 00 00
		AD 00 00 00 DC 01 00 00 DC 01 00 00 DC 01 00 00
		00 00 00 00

Handle 0x0035, DMI type 127, 4 bytes
End Of Table


____________________________________________

/sbin/modinfo nvidia | grep vermagic

vermagic:       2.6.31-gentoo-r4melf SMP mod_unload 

____________________________________________

Scanning kernel log files for NVRM messages:

  /var/log/messages:
Nov  7 01:18:18 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov  7 01:20:58 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov  7 01:32:15 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov  7 11:05:09 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov  8 11:51:47 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov  9 09:53:27 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov 10 10:20:49 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov 12 10:17:15 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
Nov 13 10:51:33 melforce kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
/var/log/kernel.log is not readable

____________________________________________

dmesg:

Linux version 2.6.31-gentoo-r4melf (root@melforce) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #1 SMP Thu Oct 29 10:26:31 MSK 2009
Command line: root=/dev/sda2 vga=0x317 splash=verbose,theme:emergence console=tty1
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
 BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
 BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
 BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI 2.3 present.
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
  4 base 000100000000 mask FFFFE0000000 write-back
  5 base 000120000000 mask FFFFF0000000 write-back
  6 disabled
  7 disabled
TOM2: 0000000130000000 aka 4864M
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfde0000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cfc00000 page 2M
 00cfc00000 - 00cfde0000 page 4k
kernel direct mapping tables up to cfde0000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000130000000
 0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ a000-c000
RAMDISK: 37ed6000 - 37fefae1
ACPI: RSDP 00000000000f70c0 00014 (v00 GBT   )
ACPI: RSDT 00000000cfde3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfde30c0 05E2B (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfde0000 00040
ACPI: SSDT 00000000cfde8fc0 00544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000cfde9540 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfde9580 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfde8f00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Bootmem setup node 0 0000000000000000-0000000130000000
  NODE_DATA [0000000000001000 - 0000000000005fff]
  bootmap [000000000000b000 -  0000000000030fff] pages 26
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000163c7f8]    TEXT DATA BSS ==> [0001000000 - 000163c7f8]
  #3 [0037ed6000 - 0037fefae1]          RAMDISK ==> [0037ed6000 - 0037fefae1]
  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #5 [000163d000 - 000163d092]              BRK ==> [000163d000 - 000163d092]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000f56d0] f56d0
 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000cfde0
    0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1047935
  DMA zone: 56 pages used for memmap
  DMA zone: 102 pages reserved
  DMA zone: 3841 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833048 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages at ffff880028022000, static data 77920 bytes
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030809
Policy zone: Normal
Kernel command line: root=/dev/sda2 vga=0x317 splash=verbose,theme:emergence console=tty1
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 60a0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Memory: 4058632k/4980736k available (2983k kernel code, 788996k absent, 133108k reserved, 2061k data, 552k init)
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 2304.753 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
hpet clockevent registered
HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4609.50 BogoMIPS (lpj=9219000)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Counters: AMD PMU driver.
... version:                 0
... bit width:               48
... generic counters:        4
... value mask:              0000ffffffffffff
... max period:              00007fffffffffff
... fixed-purpose counters:  0
... counter mask:            000000000000000f
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4609.91 BogoMIPS (lpj=9219830)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4609.78 BogoMIPS (lpj=9219561)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
mce: CPU supports 6 MCE banks
CPU2: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4609.78 BogoMIPS (lpj=9219569)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
mce: CPU supports 6 MCE banks
CPU3: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (18438.98 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-3 level MC
  groups: 0 1 2 3
CPU1 attaching sched-domain:
 domain 0: span 0-3 level MC
  groups: 1 2 3 0
CPU2 attaching sched-domain:
 domain 0: span 0-3 level MC
  groups: 2 3 0 1
CPU3 attaching sched-domain:
 domain 0: span 0-3 level MC
  groups: 3 0 1 2
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, e00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, fe02ffff] ==> [d0000000, dfffffff] and [e0100000, fe02ffff]
node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff]
TOM2: 0000000130000000 aka 4864M
bus: [00,03] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [d0000000, dfffffff]
bus: 00 index 3 mmio: [e0100000, ffffffff]
bus: 00 index 4 mmio: [130000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
pci 0000:02:00.0: reg 20 64bit mmio: [0xfdfe0000-0xfdfeffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
pci 0000:03:07.0: reg 10 io port: [0xce00-0xceff]
pci 0000:03:07.0: supports D1 D2
pci 0000:03:0e.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff]
pci 0000:03:0e.0: reg 14 32bit mmio: [0xfdef8000-0xfdefbfff]
pci 0000:03:0e.0: supports D1 D2
pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0e.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
pci 0000:00:00.0: BAR 3: can't allocate resource
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: mem resource (0xd1a00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x220-0x225 has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:02: ioport range 0x4100-0x411f has been reserved
system 00:02: ioport range 0x228-0x22f has been reserved
system 00:02: ioport range 0x238-0x23f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: ioport range 0xc00-0xc01 has been reserved
system 00:02: ioport range 0xc14-0xc14 has been reserved
system 00:02: ioport range 0xc50-0xc52 has been reserved
system 00:02: ioport range 0xc6c-0xc6d has been reserved
system 00:02: ioport range 0xc6f-0xc6f has been reserved
system 00:02: ioport range 0xcd0-0xcd1 has been reserved
system 00:02: ioport range 0xcd2-0xcd3 has been reserved
system 00:02: ioport range 0xcd4-0xcdf has been reserved
system 00:02: ioport range 0x4000-0x40fe has been reserved
system 00:02: ioport range 0x4210-0x4217 has been reserved
system 00:02: ioport range 0xb00-0xb0f has been reserved
system 00:02: ioport range 0xb10-0xb1f has been reserved
system 00:02: ioport range 0xb20-0xb3f has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xcfde0000-0xcfdfffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: 0xe000-0xefff
pci 0000:00:02.0:   MEM window: 0xf8000000-0xfbffffff
pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
pci 0000:00:0a.0:   MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:0a.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
pci 0000:00:14.4:   IO window: 0xc000-0xcfff
pci 0000:00:14.4:   MEM window: 0xfde00000-0xfdefffff
pci 0000:00:14.4:   PREFETCH window: 0xfdd00000-0xfddfffff
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1126k freed
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 7929
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:0a.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:0a.0: setting latency timer to 64
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011100000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fbcondecor: console 0 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 0
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfa00-0xfa07
atiixp 0000:00:14.1: simplex device: DMA disabled
ide1: DMA disabled
Probing IDE interface ide0...
hdb: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
Probing IDE interface ide1...
ide1: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-cd driver 5.00
ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 27 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90000668000, 00:1f:d0:b3:58:69, XID 3c4000c0 IRQ 27
ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying SB600 PMP SRST workaround and retrying
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Phenom(tm) 9650 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (2300 MHz)
powernow-k8:    1 : pstate 1 (1150 MHz)
usb 1-5: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x2676
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
ata2.00: ATA-8: WDC WD15EADS-00R6B0, 01.00A01, max UDMA/133
ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 1:0:0:0: Direct-Access     ATA      WDC WD15EADS-00R 01.0 PQ: 0 ANSI: 5
 sda1 sda2 sda3 sda4 <
sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
 sda5
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
 sda6
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
REISERFS (device sda2): found reiserfs format "3.6" with standard journal
REISERFS (device sda2): using ordered data mode
REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda2): checking transaction log (sda2)
REISERFS (device sda2): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 8:2.
Freeing unused kernel memory: 552k freed
usb 6-2: new low speed USB device using ohci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input2
generic-usb 0003:046D:C03F.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2/input0
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0066cd7100001d7d]
usb 6-3: new low speed USB device using ohci_hcd and address 3
udev: starting version 146
usb 6-3: configuration #1 chosen from 1 choice
input: HID 0566:3107 as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input3
generic-usb 0003:0566:3107.0002: input: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:13.1-3/input0
input: HID 0566:3107 as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input4
generic-usb 0003:0566:3107.0003: input: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:13.1-3/input1
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
C-Media PCI 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa09ea800
vboxdrv: fAsync=0 offMin=0x49e offMax=0x17c0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0b87440
VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0ba00e0
REISERFS (device sda1): found reiserfs format "3.6" with standard journal
REISERFS (device sda1): using ordered data mode
REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda1): checking transaction log (sda1)
REISERFS (device sda1): Using r5 hash to sort names
REISERFS (device sda5): found reiserfs format "3.6" with standard journal
REISERFS (device sda5): using ordered data mode
REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda5): checking transaction log (sda5)
REISERFS (device sda5): Using r5 hash to sort names
REISERFS (device sda6): found reiserfs format "3.6" with standard journal
REISERFS (device sda6): using ordered data mode
REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda6): checking transaction log (sda6)
REISERFS (device sda6): Using r5 hash to sort names
EXT4-fs (sda7): barriers enabled
kjournald2 starting: pid 1766, dev sda7:8, commit interval 5 seconds
EXT4-fs (sda7): internal journal on sda7:8
EXT4-fs (sda7): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda7): mounted filesystem with ordered data mode
EXT4-fs (sdb2): barriers enabled
kjournald2 starting: pid 1767, dev sdb2:8, commit interval 5 seconds
EXT4-fs (sdb2): internal journal on sdb2:8
EXT4-fs (sdb2): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdb2): mounted filesystem with ordered data mode
fbcondecor: console 1 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 5
r8169: eth0: link up
r8169: eth0: link up
Adding 2104504k swap on /dev/sda3.  Priority:-1 extents:1 across:2104504k 
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
____________________________________________

Using built-in specs.
Target: x86_64-pc-linux-gnu
Configured with: /var/tmp/portage/sys-devel/gcc-4.4.2/work/gcc-4.4.2/configure --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.4.2 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.2/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.2 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.2/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.2/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.2/include/g++-v4 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --disable-fixed-point --without-ppl --without-cloog --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --enable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --enable-cld --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.4.2/python --enable-languages=c,c++,java,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.4.2 p1.0'
Thread model: posix
gcc version 4.4.2 (Gentoo 4.4.2 p1.0) 
____________________________________________

Using built-in specs.
Target: x86_64-pc-linux-gnu
Configured with: /var/tmp/portage/sys-devel/gcc-4.4.2/work/gcc-4.4.2/configure --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.4.2 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.2/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.2 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.2/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.2/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.2/include/g++-v4 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --disable-fixed-point --without-ppl --without-cloog --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --enable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --enable-cld --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.4.2/python --enable-languages=c,c++,java,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.4.2 p1.0'
Thread model: posix
gcc version 4.4.2 (Gentoo 4.4.2 p1.0) 
____________________________________________

xset -q:

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xset:  unable to open display ":0"
____________________________________________

nvidia-settings -q all:

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified


ERROR: The control display is undefined; please run `nvidia-settings
       --help` for usage information.

____________________________________________

/proc/cmdline
root=/dev/sda2 vga=0x317 splash=verbose,theme:emergence console=tty1

____________________________________________

/proc/cpuinfo
processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 2
model name	: AMD Phenom(tm) 9650 Quad-Core Processor
stepping	: 3
cpu MHz		: 1150.000
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
bogomips	: 4609.50
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor	: 1
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 2
model name	: AMD Phenom(tm) 9650 Quad-Core Processor
stepping	: 3
cpu MHz		: 1150.000
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 4
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
bogomips	: 4609.91
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor	: 2
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 2
model name	: AMD Phenom(tm) 9650 Quad-Core Processor
stepping	: 3
cpu MHz		: 1150.000
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 3
cpu cores	: 4
apicid		: 3
initial apicid	: 3
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
bogomips	: 4609.78
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor	: 3
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 2
model name	: AMD Phenom(tm) 9650 Quad-Core Processor
stepping	: 3
cpu MHz		: 1150.000
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 2
cpu cores	: 4
apicid		: 2
initial apicid	: 2
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
bogomips	: 4609.78
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate


____________________________________________

/proc/interrupts
            CPU0       CPU1       CPU2       CPU3       
   0:         41          0          0          0   IO-APIC-edge      timer
   1:          0          0          2          0   IO-APIC-edge      i8042
   4:          0          0          2          0   IO-APIC-edge    
   9:          0          0          0          0   IO-APIC-fasteoi   acpi
  12:          0          0          3          0   IO-APIC-edge      i8042
  14:          0          0        538          3   IO-APIC-edge      ide0
  15:          0          0          0          0   IO-APIC-edge      ide1
  16:          0          1       5441        200   IO-APIC-fasteoi   ohci_hcd:usb3, ohci_hcd:usb4, HDA Intel
  17:          0          0       2620          6   IO-APIC-fasteoi   ehci_hcd:usb1
  18:          0          2       9575         32   IO-APIC-fasteoi   ohci_hcd:usb5, ohci_hcd:usb6, ohci_hcd:usb7, nvidia
  19:          0          0          3          0   IO-APIC-fasteoi   ehci_hcd:usb2
  21:          0          0          0          0   IO-APIC-fasteoi   CMI8738
  22:          0          1      38782        127   IO-APIC-fasteoi   ahci, ohci1394
  24:      99109          0          0          0  HPET_MSI-edge      hpet2
  27:          0          0       1821          5   PCI-MSI-edge      eth0
 NMI:          0          0          0          0   Non-maskable interrupts
 LOC:         85      99174      99147      99122   Local timer interrupts
 SPU:          0          0          0          0   Spurious interrupts
 CNT:          0          0          0          0   Performance counter interrupts
 PND:          0          0          0          0   Performance pending work
 RES:       9207       9321       6304       9310   Rescheduling interrupts
 CAL:       1002       1115        140       1117   Function call interrupts
 TLB:        785        766        644        945   TLB shootdowns
 TRM:          0          0          0          0   Thermal event interrupts
 THR:          0          0          0          0   Threshold APIC interrupts
 MCE:          0          0          0          0   Machine check exceptions
 MCP:          2          2          2          2   Machine check polls
 ERR:          0
 MIS:          0

____________________________________________

/proc/meminfo
MemTotal:        4060312 kB
MemFree:         2679848 kB
Buffers:           41608 kB
Cached:           775444 kB
SwapCached:            0 kB
Active:           571748 kB
Inactive:         653612 kB
Active(anon):     410008 kB
Inactive(anon):        0 kB
Active(file):     161740 kB
Inactive(file):   653612 kB
Unevictable:           4 kB
Mlocked:               4 kB
SwapTotal:       2104504 kB
SwapFree:        2104504 kB
Dirty:                20 kB
Writeback:            16 kB
AnonPages:        408532 kB
Mapped:           132960 kB
Slab:              82112 kB
SReclaimable:      55736 kB
SUnreclaim:        26376 kB
PageTables:        21204 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     4134660 kB
Committed_AS:    1341624 kB
VmallocTotal:   34359738367 kB
VmallocUsed:      323580 kB
VmallocChunk:   34359398907 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:       16256 kB
DirectMap2M:     2078720 kB
DirectMap1G:     2097152 kB

____________________________________________

/proc/modules
snd_seq_oss 27600 0 - Live 0xffffffffa0bdd000
snd_seq_midi_event 6720 1 snd_seq_oss, Live 0xffffffffa0bd6000
snd_seq 49072 4 snd_seq_oss,snd_seq_midi_event, Live 0xffffffffa0bc5000
snd_pcm_oss 36688 0 - Live 0xffffffffa0bb7000
snd_mixer_oss 15728 1 snd_pcm_oss, Live 0xffffffffa0bae000
vboxnetadp 76988 0 - Live 0xffffffffa0b96000
vboxnetflt 82556 0 - Live 0xffffffffa0b7c000
vboxdrv 1685724 1 vboxnetflt, Live 0xffffffffa09db000
nvidia 9609688 42 - Live 0xffffffffa00ab000 (P)
snd_hda_intel 26328 5 - Live 0xffffffffa009f000
snd_hda_codec 57392 1 snd_hda_intel, Live 0xffffffffa008e000
snd_cmipci 32816 1 - Live 0xffffffffa0080000
snd_pcm 72024 5 snd_pcm_oss,snd_hda_intel,snd_hda_codec,snd_cmipci, Live 0xffffffffa0069000
snd_opl3_lib 9936 1 snd_cmipci, Live 0xffffffffa0061000
snd_hwdep 8200 1 snd_opl3_lib, Live 0xffffffffa0059000
snd_mpu401_uart 7104 1 snd_cmipci, Live 0xffffffffa0052000
snd_rawmidi 21008 1 snd_mpu401_uart, Live 0xffffffffa0047000
snd_timer 20288 4 snd_seq,snd_pcm,snd_opl3_lib, Live 0xffffffffa003d000
snd_seq_device 6868 4 snd_seq_oss,snd_seq,snd_opl3_lib,snd_rawmidi, Live 0xffffffffa0036000
snd 58216 24 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_cmipci,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_timer,snd_seq_device, Live 0xffffffffa0022000
soundcore 6960 1 snd, Live 0xffffffffa001b000
snd_page_alloc 8896 2 snd_hda_intel,snd_pcm, Live 0xffffffffa0013000
i2c_piix4 10816 0 - Live 0xffffffffa000b000
i2c_core 20800 2 nvidia,i2c_piix4, Live 0xffffffffa0000000

____________________________________________

/proc/version
Linux version 2.6.31-gentoo-r4melf (root@melforce) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #1 SMP Thu Oct 29 10:26:31 MSK 2009

____________________________________________

/proc/pci does not exist

____________________________________________

/proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000f0000-000fffff : reserved
00100000-cfddffff : System RAM
  01000000-012e9fe3 : Kernel code
  012e9fe4-014ed587 : Kernel data
  01581000-0163c7f7 : Kernel bss
  20000000-23ffffff : GART
cfde0000-cfde2fff : ACPI Non-volatile Storage
cfde3000-cfdeffff : ACPI Tables
cfdf0000-cfdfffff : reserved
cfe00000-cfffffff : RAM buffer
d0000000-dfffffff : PCI Bus 0000:01
  d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0 [00-ff]
  e0000000-efffffff : reserved
    e0000000-efffffff : pnp 00:0a
f8000000-fbffffff : PCI Bus 0000:01
  f8000000-f9ffffff : 0000:01:00.0
    f9000000-f9dfffff : vesafb
  fa000000-faffffff : 0000:01:00.0
    fa000000-faffffff : nvidia
  fb000000-fb01ffff : 0000:01:00.0
fdc00000-fdcfffff : PCI Bus 0000:02
fdd00000-fddfffff : PCI Bus 0000:03
fde00000-fdefffff : PCI Bus 0000:03
  fdef8000-fdefbfff : 0000:03:0e.0
  fdeff000-fdeff7ff : 0000:03:0e.0
    fdeff000-fdeff7ff : ohci1394
fdf00000-fdffffff : PCI Bus 0000:02
  fdf00000-fdf0ffff : 0000:02:00.0
  fdfe0000-fdfeffff : 0000:02:00.0
    fdfe0000-fdfeffff : r8169
  fdfff000-fdffffff : 0000:02:00.0
    fdfff000-fdffffff : r8169
fe024000-fe027fff : 0000:00:14.2
  fe024000-fe027fff : ICH HD audio
fe028000-fe028fff : 0000:00:14.5
  fe028000-fe028fff : ohci_hcd
fe029000-fe0290ff : 0000:00:13.2
  fe029000-fe0290ff : ehci_hcd
fe02a000-fe02afff : 0000:00:13.1
  fe02a000-fe02afff : ohci_hcd
fe02b000-fe02bfff : 0000:00:13.0
  fe02b000-fe02bfff : ohci_hcd
fe02c000-fe02c0ff : 0000:00:12.2
  fe02c000-fe02c0ff : ehci_hcd
fe02d000-fe02dfff : 0000:00:12.1
  fe02d000-fe02dfff : ohci_hcd
fe02e000-fe02efff : 0000:00:12.0
  fe02e000-fe02efff : ohci_hcd
fe02f000-fe02f3ff : 0000:00:11.0
  fe02f000-fe02f3ff : ahci
fec00000-ffffffff : reserved
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0
  fee00000-fee00fff : Local APIC
    fee00000-fee00fff : pnp 00:0b
  fff80000-fffeffff : pnp 00:0b
  ffff0000-ffffffff : pnp 00:0b
100000000-12fffffff : System RAM

____________________________________________

/proc/mtrr
reg00: base=0x000000000 (    0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size=  256MB, count=1: write-back
reg03: base=0x0cfe00000 ( 3326MB), size=    2MB, count=1: uncachable
reg04: base=0x100000000 ( 4096MB), size=  512MB, count=1: write-back
reg05: base=0x120000000 ( 4608MB), size=  256MB, count=1: write-back

____________________________________________

/proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
GCC version:  gcc version 4.4.2 (Gentoo 4.4.2 p1.0) 

____________________________________________

/proc/driver/nvidia/cards/0
Model: 		 GeForce 8500 GT
IRQ:   		 18
Video BIOS: 	 60.86.26.00.09
Card Type: 	 PCI-E
DMA Size: 	 40 bits
DMA Mask: 	 0xffffffffff
Bus Location: 	 01.00.0

____________________________________________

/proc/driver/nvidia/warnings/README
The NVIDIA graphics driver tries to detect potential problems
with the host system and warns about them using the system's
logging mechanisms. Important warning message are also logged
to dedicated text files in this directory.

____________________________________________

/proc/driver/nvidia/registry
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 0
EnableAGPFW: 0
Mobile: [phone]
ResmanDebugLevel: 4294967295
RmLogonRC: 1
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 27
DeviceFileMode: 432
RemapLimit: 0
UpdateMemoryTypes: 4294967295
UseVBios: 1
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
EnableMSI: 0
MapRegistersEarly: 0
RegistryDwords: ""

____________________________________________

/proc/asound/cards
 0 [SB             ]: HDA-Intel - HDA ATI SB
                      HDA ATI SB at 0xfe024000 irq 16
 1 [CMI8738        ]: CMI8738 - C-Media CMI8738
                      C-Media CMI8738 (model 37) at 0xce00, irq 21

____________________________________________

/proc/asound/pcm
00-00: HDA Generic : HDA Generic : playback 1 : capture 1
01-00: CMI8738 : C-Media PCI DAC/ADC : playback 1 : capture 1
01-01: CMI8738 : C-Media PCI 2nd DAC : playback 1
01-02: CMI8738 : C-Media PCI IEC958 : playback 1 : capture 1

____________________________________________

/proc/asound/modules
 0 snd_hda_intel
 1 snd_cmipci

____________________________________________

/proc/asound/devices
  0: [ 0]   : control
  1:        : sequencer
 16: [ 0- 0]: digital audio playback
 24: [ 0- 0]: digital audio capture
 32: [ 1]   : control
 33:        : timer
 48: [ 1- 0]: digital audio playback
 49: [ 1- 1]: digital audio playback
 50: [ 1- 2]: digital audio playback
 56: [ 1- 0]: digital audio capture
 58: [ 1- 2]: digital audio capture

____________________________________________

/proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.

____________________________________________

/proc/asound/timers
G0: system timer : 4000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
  Client application 3026 : running
P0-0-1: PCM capture 0-0-1 : SLAVE
P1-0-0: PCM playback 1-0-0 : SLAVE
P1-0-1: PCM capture 1-0-1 : SLAVE
P1-1-0: PCM playback 1-1-0 : SLAVE
P1-2-0: PCM playback 1-2-0 : SLAVE
P1-2-1: PCM capture 1-2-1 : SLAVE

____________________________________________

/proc/asound/hwdep

____________________________________________

/proc/asound/card0/codec#0
Codec: Realtek ID 888
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0888
Subsystem Id: 0x1458e601
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x0e 0x0e]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x8b 0x8b]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x8a 0x8a] [0x99 0x99] [0x94 0x94] [0x80 0x80] [0x96 0x96] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x1a 0x1a]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x02]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000003e: IN OUT HP Detect Trigger
  Pin Default 0x01014410: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000003e: IN OUT HP Detect Trigger
  Pin Default 0x01011412: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0x2
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000036: IN OUT Detect Trigger
  Pin Default 0x01016411: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    DefAssociation = 0x1, Sequence = 0x1
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000036: IN OUT Detect Trigger
  Pin Default 0x01012414: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Grey
    DefAssociation = 0x1, Sequence = 0x4
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373e: IN OUT HP Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01a19c40: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373e: IN OUT HP Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02a19040: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373e: IN OUT HP Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01813c41: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0x1
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000373e: IN OUT HP Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x9933014f: [Fixed] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x4, Sequence = 0xf
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x00000010: OUT
  Pin Default 0x014b1130: [Jack] SPDIF Out at Ext Rear
    Conn = Comb, Color = Black
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
  Pincap 0x00000020: IN
  Pin Default 0x01cb6160: [Jack] SPDIF In at Ext Rear
    Conn = Comb, Color = Orange
    DefAssociation = 0x6, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=17
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x25 0x0b

____________________________________________

End of NVIDIA bug report log file.