A0000-BFFFF uncachable C0000-CBFFF write-protect CC000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 0C0000000 mask FC0000000 uncachable 2 base 0BE000000 mask FFE000000 uncachable 3 base 0BDE00000 mask FFFE00000 uncachable 4 base 100000000 mask FC0000000 write-back 5 base 0BDD00000 mask FFFF00000 uncachable 6 disabled 7 disabled e820 update range: 00000000bdd00000 - 0000000100000000 (usable) ==> (reserved) init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 7fb30000 - 7ffff912 Allocated new RAMDISK: 005d6000 - 00aa5912 Move RAMDISK from 000000007fb30000 - 000000007ffff911 to 005d6000 - 00aa5911 ACPI: RSDP 000f6f80 00014 (v00 GBT ) ACPI: RSDT bdce3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP bdce30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT bdce3180 0451E (v01 GBT GBTUACPI 00001000 MSFT 0100000C) ACPI: FACS bdce0000 00040 ACPI: HPET bdce7800 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG bdce7880 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC bdce7700 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: SSDT bdce81e0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) ACPI: Local APIC address 0xfee00000 2148MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00005d2814] TEXT DATA BSS ==> [0000100000 - 00005d2814] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [00005d3000 - 00005d50f6] BRK ==> [00005d3000 - 00005d50f6] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [00005d6000 - 0000aa5912] NEW RAMDISK ==> [00005d6000 - 0000aa5912] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f5590] f5590 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bdce0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bdce0 On node 0 totalpages: 777343 free_area_init_node: node 0, pgdat c0529ea0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4298 pages used for memmap HighMem zone: 545816 pages, LIFO batch:31 Using APIC driver default ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 10 pages at c27d0000, static data 20156 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771269 Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2333.394 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:000bdce0) Memory: 3073184k/3109760k available (3089k kernel code, 35232k reserved, 1260k data, 328k init, 2200456k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0549000 - 0xc059b000 ( 328 kB) .data : 0xc040471f - 0xc053f94c (1260 kB) .text : 0xc0100000 - 0xc040471f (3089 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.78 BogoMIPS (lpj=23333940) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 27k freed ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a Booting processor 1 APIC 0x3 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4666.28 BogoMIPS (lpj=23331435) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4666.29 BogoMIPS (lpj=23331456) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x2 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4666.28 BogoMIPS (lpj=23331404) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (18665.64 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0,2 level MC groups: 0 2 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU1 attaching sched-domain: domain 0: span 1,3 level MC groups: 1 3 domain 1: span 0-3 level CPU groups: 1,3 0,2 CPU2 attaching sched-domain: domain 0: span 0,2 level MC groups: 2 0 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU3 attaching sched-domain: domain 0: span 1,3 level MC groups: 3 1 domain 1: span 0-3 level CPU groups: 1,3 0,2 net_namespace: 728 bytes NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered dca service started, version 1.8 PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255 PCI: MCFG area at c0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xe1000000-0xe13fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0xe200-0xe207] pci 0000:00:02.1: reg 10 64bit mmio: [0xe1400000-0xe14fffff] pci 0000:00:1a.0: reg 20 io port: [0xe600-0xe61f] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1a.2: reg 20 io port: [0xe100-0xe11f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe1705000-0xe17053ff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe1700000-0xe1703fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe1704000-0xe17043ff] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe1706000-0xe17060ff] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe807] pci 0000:00:1f.5: reg 14 io port: [0xe900-0xe903] pci 0000:00:1f.5: reg 18 io port: [0xea00-0xea07] pci 0000:00:1f.5: reg 1c io port: [0xeb00-0xeb03] pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f] pci 0000:00:1f.5: reg 24 io port: [0xed00-0xed0f] pci 0000:02:00.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:02:00.0: reg 18 64bit mmio: [0xe1510000-0xe1510fff] pci 0000:02:00.0: reg 20 64bit mmio: [0xe1500000-0xe150ffff] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xe0000000-0xe0ffffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe1500000-0xe15fffff] pci 0000:03:05.0: reg 10 io port: [0xd000-0xd007] pci 0000:03:05.0: reg 14 io port: [0xd100-0xd103] pci 0000:03:05.0: reg 18 io port: [0xd200-0xd207] pci 0000:03:05.0: reg 1c io port: [0xd300-0xd303] pci 0000:03:05.0: reg 20 io port: [0xd400-0xd40f] pci 0000:03:07.0: reg 10 32bit mmio: [0xe1604000-0xe16047ff] pci 0000:03:07.0: reg 14 32bit mmio: [0xe1600000-0xe1603fff] pci 0000:03:07.0: supports D1 D2 pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:07.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xe1600000-0xe16fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:0a: ioport range 0x400-0x4bf has been reserved system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved system 00:0c: iomem range 0xcc400-0xcffff has been reserved system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved system 00:0c: iomem range 0xfc000-0xfffff could not be reserved system 00:0c: iomem range 0xbdce0000-0xbdcfffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0xbdcdffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfed10000-0xfed1dfff has been reserved system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved system 00:0c: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.5: IO window: 0xc000-0xcfff pci 0000:00:1c.5: MEM window: 0xe0000000-0xe0ffffff pci 0000:00:1c.5: PREFETCH window: 0x000000e1500000-0x000000e15fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xe1600000-0xe16fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe0ffffff] pci_bus 0000:02: resource 2 pref mem [0xe1500000-0xe15fffff] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0xe1600000-0xe16fffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4926k freed Machine check exception polling timer started. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/O]. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 1716 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.5: setting latency timer to 64 vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 32704k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. jme: JMicron JMC2XX ethernet driver version 1.0.4 aoe: AoE v47 initialised. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. input: AT Translated Set 2 keyboard as /class/input/input1 RPC: Registered tcp transport module. Using IPI Shortcut mode Freeing unused kernel memory: 328k freed Write protecting the kernel text: 3092k Write protecting the kernel read-only data: 1004k libata version 3.00 loaded. Error: Driver 'pata_platform' is already registered, aborting... pata_it8213 0000:03:05.0: version 0.0.3 pata_it8213 0000:03:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pata_it8213 0000:03:05.0: setting latency timer to 64 scsi0 : pata_it8213 scsi1 : pata_it8213 ata1: PATA max UDMA/66 cmd 0xd000 ctl 0xd100 bmdma 0xd400 irq 21 ata2: DUMMY ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19 ata6: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19 ata5: SATA link down (SStatus 0 SControl 300) ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.01: SATA link down (SStatus 0 SControl 300) ata3.00: HPA detected: current 976771055, native 976773168 ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 976771055 512-byte hardware sectors: (500 GB/465 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 2:0:0:0: [sda] Attached SCSI disk ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.01: SATA link down (SStatus 0 SControl 300) ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100 ata4.00: configured for UDMA/100 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 102x/102x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 ata6: SATA link down (SStatus 0 SControl 300) sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 NCR53c406a: no available ports found scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Adaptec aacraid driver 1.1-5[2461]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 QLogic Fibre Channel HBA Driver: 8.03.01-k1 Emulex LightPulse Fibre Channel SCSI driver 8.3.1 Copyright(c) 2004-2009 Emulex. All rights reserved. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe1705000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-gentoo-r8 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1704000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-gentoo-r8 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e600 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-gentoo-r8 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-gentoo-r8 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-gentoo-r8 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.30-gentoo-r8 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.30-gentoo-r8 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.30-gentoo-r8 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ohci1394 0000:03:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[e1604000-e16047ff] Max Packet=[2048] IR/IT contexts=[4/8] device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 946 MB/s raid6: int32x2 950 MB/s raid6: int32x4 694 MB/s raid6: int32x8 639 MB/s raid6: mmxx1 2882 MB/s ieee1394: Host added: ID:BUS[0-00:1023] GUID[00a9b97000001fd0] raid6: mmxx2 3289 MB/s raid6: sse1x1 2083 MB/s raid6: sse1x2 2556 MB/s raid6: sse2x1 3962 MB/s raid6: sse2x2 4606 MB/s raid6: using algorithm sse2x2 (4606 MB/s) async_tx: api initialized (async) xor: automatically using best checksumming function: pIII_sse pIII_sse : 8963.600 MB/sec xor: using function: pIII_sse (8963.600 MB/sec) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 JFS: nTxBlock = 8192, nTxLock = 65536 fuse init (API version 7.11) Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. EXT4-fs: Update your userspace programs to mount using ext4 EXT4-fs: ext4dev backwards compatibility will go away by 2.6.31 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly Real Time Clock Driver v1.12b warning: process `hwsetup' used the deprecated sysctl system call with 1.23. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: no MSI. Back to INTx. eth0: RTL8168c/8111c at 0xf952c000, 00:1f:d0:a7:10:b1, XID 3c4000c0 IRQ 17 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ACPI: SSDT bdce7900 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT bdce7dc0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: SSDT bdce7f20 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) processor ACPI_CPU:02: registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: SSDT bdce8080 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) processor ACPI_CPU:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) input: Power Button as /class/input/input2 ACPI: Power Button [PWRF] input: Power Button as /class/input/input3 ACPI: Power Button [PWRB] r8169: eth0: link up r8169: eth0: link up kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode.