Linux version 2.6.30-gentoo-r6 (root@HP6820S) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #4 SMP Sat Oct 3 15:39:32 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffc5400 (reserved) BIOS-e820: 000000007ffc5400 - 000000007ffe7fb8 (ACPI NVS) BIOS-e820: 000000007ffe7fb8 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7ffb0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FEDA0000 mask FFFFE0000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000fc600 00024 (v02 HP ) ACPI: XSDT 7ffc81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 7ffc8084 000F4 (v04 HP 30D7 00000003 HP 00000001) ACPI: DSDT 7ffc84cc 127A3 (v01 HP nc6xxxs 00010000 MSFT 03000001) ACPI: FACS 7ffe7d80 00040 ACPI: SLIC 7ffc8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 7ffc83bc 00038 (v01 HP 30D7 00000001 HP 00000001) ACPI: APIC 7ffc83f4 00068 (v01 HP 30D7 00000001 HP 00000001) ACPI: MCFG 7ffc845c 0003C (v01 HP 30D7 00000001 HP 00000001) ACPI: TCPA 7ffc8498 00032 (v02 HP 30D7 00000001 HP 00000001) ACPI: SSDT 7ffdac6f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001) ACPI: SSDT 7ffdaf97 0014E (v01 HP HPQPRN 00000001 MSFT 03000001) ACPI: SSDT 7ffdbaab 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) ACPI: SSDT 7ffdbd0a 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) ACPI: SSDT 7ffdbdb0 004D7 (v01 HP CpuPm 00003000 INTL 20060317) ACPI: Local APIC address 0xfee00000 1159MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000075fdf4] TEXT DATA BSS ==> [0000100000 - 000075fdf4] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000760000 - 0000763100] BRK ==> [0000760000 - 0000763100] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007ffb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007ffb0 On node 0 totalpages: 524111 free_area_init_node: node 0, pgdat c066dec0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2320 pages used for memmap HighMem zone: 294562 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c200a000, static data 23708 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015 Kernel command line: root=/dev/sda4 doscsi quiet processor.max_cstate=9 processor.nocst Booting kernel: `' invalid for parameter `processor.nocst' Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:320 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2095.036 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007ffb0) Memory: 2071612k/2096832k available (4205k kernel code, 23884k reserved, 1431k data, 340k init, 1187528k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0689000 - 0xc06de000 ( 340 kB) .data : 0xc051b703 - 0xc06815b8 (1431 kB) .text : 0xc0100000 - 0xc051b703 (4205 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.07 BogoMIPS (lpj=20950360) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4189.47 BogoMIPS (lpj=20947399) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8379.55 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 776 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [C24A] (on) ACPI: Power Resource [C174] (off) ACPI: Power Resource [C363] (off) ACPI: Power Resource [C364] (off) ACPI: Power Resource [C365] (off) ACPI: Power Resource [C366] (off) ACPI: Power Resource [C367] (off) ACPI: Power Resource [C368] (off) ACPI: Power Resource [C369] (off) ACPI: Power Resource [C36A] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [C003] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0xd8500000-0xd851ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xd8520000-0xd8520fff] pci 0000:00:19.0: reg 18 io port: [0x3000-0x301f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x3020-0x303f] pci 0000:00:1a.1: reg 20 io port: [0x3040-0x305f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd8521000-0xd85213ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xd8524000-0xd8527fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f] pci 0000:00:1d.1: reg 20 io port: [0x3080-0x309f] pci 0000:00:1d.2: reg 20 io port: [0x30a0-0x30bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd8528000-0xd85283ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x30c0-0x30cf] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] pci 0000:00:1f.2: reg 20 io port: [0x3100-0x311f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd8529000-0xd85297ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xd8400000-0xd840ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xd8400000-0xd84fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] pci 0000:10:00.0: reg 10 32bit mmio: [0xd8000000-0xd8000fff] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xd8000000-0xd80fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C097._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11E._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) ACPI: PCI Interrupt Link [C130] (IRQs 10 *11) ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C141] (IRQs *10 11) ACPI: PCI Interrupt Link [C142] (IRQs *10 11) ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5 ACPI Exception (pci_link-0182): AE_NOT_FOUND, Evaluating _PRS [20090320] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NET: Registered protocol family 23 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7fffffff could not be reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: ioport range 0x800-0x80f has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x1000-0x107f has been reserved system 00:0a: ioport range 0x1100-0x113f has been reserved system 00:0a: ioport range 0x1200-0x121f has been reserved system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved system 00:0b: iomem range 0xcf800-0xcffff has been reserved system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xd8400000-0xd84fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xd8000000-0xd80fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xd8400000-0xd84fffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] pci_bus 0000:10: resource 1 mem: [0xd8000000-0xd80fffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 1728 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 ACPI: AC Adapter [C1E8] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [C263] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [C1ED] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [C36B] (off) fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [C36C] (off) fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [C36D] (off) fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [C36E] (off) fan PNP0C0B:04: registered as cooling_device4 ACPI: Fan [C36F] (off) fan PNP0C0B:05: registered as cooling_device5 ACPI: Fan [C370] (off) fan PNP0C0B:06: registered as cooling_device6 ACPI: Fan [C371] (off) fan PNP0C0B:07: registered as cooling_device7 ACPI: Fan [C372] (off) ACPI: SSDT 7ffdb1ad 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) ACPI: SSDT 7ffdb4b1 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device8 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7ffdb0e5 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) ACPI: SSDT 7ffdb42c 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI_CPU:01: registered as cooling_device9 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ2] (29 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ3] (20 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ4] (74 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ1] (29 C) ACPI: Battery Slot [C1E9] (battery absent) brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30c0-0x30c7 Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: irq 27 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xd8529000 port 0xd8529100 irq 27 ata2: DUMMY ata3: DUMMY e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 28 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:29:91:3f:0f 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: ffffff-0ff tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2009 Intel Corporation iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:10:00.0: setting latency timer to 64 iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:10:00.0: irq 29 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-3945-rs' console [netcon0] enabled netconsole: network logging started ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd8521000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd8528000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00003080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:C247,PNP0f13:C248] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: TOSHIBA MK2546GSX, LB014C, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 Clocksource tsc unstable (delta = -123631451 ns) ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 6-1: new low speed USB device using uhci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.3, id: 0xa0b1, caps: 0xa04711/0xa0040a input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 usb 6-1: configuration #1 chosen from 1 choice kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:4. Freeing unused kernel memory: 340k freed Write protecting the kernel text: 4208k Write protecting the kernel read-only data: 1168k input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input5 generic-usb 0003:093A:2510.0001: input: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-1/input0 iwl3945 0000:10:00.0: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. udev: starting version 141 EXT3 FS on sda4, internal journal Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. hda: MWDMA2 mode selected HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 28 for MSI/MSI-X e1000e 0000:00:19.0: irq 28 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present [drm] Setting GART location based on new memory map [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] Num pipes: 1 [drm] Loading R500 Microcode [drm] Num pipes: 1