dmesg output (does not change with crash)

dmesg.txt (text/plain), 20.52 KB, created by marvin_43 on 2009-10-05 13:37:15 UTC

Linux version 2.6.31-gentoo-r1 (root@localhost) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #1 SMP Tue Sep 29 14:22:18 BST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ef30000 (usable)
 BIOS-e820: 000000003ef30000 - 000000003ef40000 (ACPI data)
 BIOS-e820: 000000003ef40000 - 000000003eff0000 (ACPI NVS)
 BIOS-e820: 000000003eff0000 - 000000003f000000 (reserved)
 BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
DMI 2.3 present.
last_pfn = 0x3ef30 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
initial memory mapped : 0 - 01a00000
init_memory_mapping: 0000000000000000-0000000037f1d000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037e00000 page 2M
 0037e00000 - 0037f1d000 page 4k
kernel direct mapping tables up to 37f1d000 @ 7000-d000
ACPI: RSDP 000f5a40 00014 (v00 ACPIAM)
ACPI: RSDT 3ef30000 00030 (v01 INTEL  D865GLC  20030624 MSFT 00000097)
ACPI: FACP 3ef30200 00081 (v02 INTEL  D865GLC  20030624 MSFT 00000097)
ACPI: DSDT 3ef30370 0416B (v01 INTEL  D865GLC  00000001 MSFT 0100000D)
ACPI: FACS 3ef40000 00040
ACPI: APIC 3ef30300 00068 (v01 INTEL  D865GLC  20030624 MSFT 00000097)
ACPI: WDDT 3ef35f04 00040 (v01 INTEL  OEMWDDT  00000001 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
  mapped low ram: 0 - 37f1d000
  low ram: 0 - 37f1d000
  node 0 low ram: 00000000 - 37f1d000
  node 0 bootmap 00009000 - 0000ffe4
(8 early reservations) ==> bootmem [0000000000 - 0037f1d000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0001000000 - 00016caa80]    TEXT DATA BSS ==> [0001000000 - 00016caa80]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [00016cb000 - 00016d81b8]              BRK ==> [00016cb000 - 00016d81b8]
  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #7 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00037f1d
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00037f1d
On node 0 totalpages: 229052
free_area_init_node: node 0, pgdat c15c44c0, node_mem_map c16d9000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1759 pages used for memmap
  Normal zone: 223294 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 3f000000 (gap: 3f000000:bfcf0000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages at c1ddd000, static data 32412 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227261
Kernel command line: root=/dev/hda6
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 900952k/916596k available (3825k kernel code, 15120k reserved, 2109k data, 356k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
    vmalloc : 0xf871d000 - 0xfff1d000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7f1d000   ( 895 MB)
      .init : 0xc15cc000 - 0xc1625000   ( 356 kB)
      .data : 0xc13bc6ed - 0xc15cbba0   (2109 kB)
      .text : 0xc1000000 - 0xc13bc6ed   (3825 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
NR_IRQS:512
Fast TSC calibration using PIT
Detected 2793.353 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.70 BogoMIPS (lpj=11173412)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5586.78 BogoMIPS (lpj=11173560)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU1: Thermal monitoring enabled (TM1)
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (11173.48 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xffa80000-0xffafffff]
pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07]
pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa7fc00-0xffa7ffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807]
pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403]
pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007]
pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03]
pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd80f]
pci 0000:00:1f.3: reg 20 io port: [0xc400-0xc41f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xffa7f800-0xffa7f9ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffa7f400-0xffa7f4ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:08.0: reg 10 32bit mmio: [0xff8ff000-0xff8fffff]
pci 0000:01:08.0: reg 14 io port: [0xbc00-0xbc3f]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xff800000-0xff8fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x400-0x47f has been reserved
system 00:0c: ioport range 0x680-0x6ff has been reserved
system 00:0c: ioport range 0x500-0x53f has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x3effffff could not be reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
pci 0000:00:1e.0:   MEM window: 0xff800000-0xff8fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xff800000-0xff8fffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
microcode: CPU1 sig=0xf29, pf=0x4, revision=0x11
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
msgmni has been set to 1759
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
Real Time Clock Driver v1.12b
Intel 82802 RNG detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: detected 16252K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02)
pci 0000:00:1f.1: enabling device (0005 -> 0007)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7
    ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: SONY CD-RW CRX300E, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3
ide-cd driver 5.00
ide-cd: hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 18
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 18
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xff8ff000, irq 20, MAC addr 00:0c:f1:78:cd:33
sky2 driver version 1.23
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usb 2-1: new low speed USB device using uhci_hcd and address 2
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
REISERFS (device hda6): found reiserfs format "3.6" with standard journal
REISERFS (device hda6): using ordered data mode
REISERFS (device hda6): journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device hda6): checking transaction log (hda6)
REISERFS (device hda6): Using r5 hash to sort names
usb 2-1: configuration #1 chosen from 1 choice
VFS: Mounted root (reiserfs filesystem) readonly on device 3:6.
Freeing unused kernel memory: 356k freed
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
generic-usb 0003:0A81:0205.0001: input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5
generic-usb 0003:0A81:0205.0002: input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1/input1
udev: starting version 146
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 55294 usecs (2664 samples)
intel8x0: clocking to 48000
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with journal data mode.
Adding 441748k swap on /dev/hda5.  Priority:-1 extents:1 across:441748k 
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0 NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present