dmesg with several insertions/removal of the I2C host adapter recorded

dmesg (text/plain), 43.14 KB, created by Alexander Bezrukov on 2009-09-19 03:34:18 UTC

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.30.7-alb (root@black) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #1 SMP Thu Sep 17 20:49:14 MSD 2009
Command line: root=/dev/sda7 resume=/dev/sda10
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff9300 (usable)
 BIOS-e820: 000000007fff9300 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
DMI 2.3 present.
last_pfn = 0x280000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-back
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0100000000 mask FF00000000 write-back
  2 base 0200000000 mask FF80000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7fff9 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-000000007fff9000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007fff9000 page 4k
kernel direct mapping tables up to 7fff9000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000000280000000
 0100000000 - 0280000000 page 2M
kernel direct mapping tables up to 280000000 @ a000-15000
ACPI: RSDP 00000000000e8010 00024 (v02 HP    )
ACPI: XSDT 000000007fff94fc 00044 (v01 HP     CPQ0062  20061128      00000000)
ACPI: FACP 000000007fff96a4 0010C (v03 HP     VIPER    00000001      00000000)
ACPI Warning (tbfadt-0289): FADT (revision 3) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20090320]
ACPI: DSDT 000000007fff989a 014AF (v01 HP         DSDT 00000001 MSFT 0100000E)
ACPI: FACS 000000007fff9300 00040
ACPI: SSDT 000000007fffad49 03ADA (v02 HP      PROJECT 00000001 MSFT 0100000E)
ACPI: APIC 000000007fff97b0 0009E (v01 HP     VIPER    00000001      00000000)
ACPI: SRAT 000000007fff93ec 00110 (v02 HP     VIPER    00000001      00000000)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 e8000-80000000
SRAT: Node 0 PXM 0 100000000-180000000
SRAT: Node 1 PXM 1 180000000-280000000
NUMA: Allocated memnodemap from 100000 - 1a0040
NUMA: Using 15 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
  NODE_DATA [0000000000010000 - 0000000000043fff]
  bootmap [0000000000044000 -  0000000000073fff] pages 30
(8 early reservations) ==> bootmem [0000000000 - 0180000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000aa4418]    TEXT DATA BSS ==> [0000200000 - 0000aa4418]
  #3 [000009d400 - 0000100000]    BIOS reserved ==> [000009d400 - 0000100000]
  #4 [0000aa5000 - 0000aa50eb]              BRK ==> [0000aa5000 - 0000aa50eb]
  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #6 [000000a000 - 0000010000]          PGTABLE ==> [000000a000 - 0000010000]
  #7 [0000100000 - 00001a0040]       MEMNODEMAP ==> [0000100000 - 00001a0040]
Bootmem setup node 1 0000000180000000-0000000280000000
  NODE_DATA [0000000180000000 - 0000000180033fff]
  bootmap [0000000180034000 -  0000000180053fff] pages 20
(8 early reservations) ==> bootmem [0180000000 - 0280000000]
  #0 [0000000000 - 0000001000]   BIOS data page
  #1 [0000006000 - 0000008000]       TRAMPOLINE
  #2 [0000200000 - 0000aa4418]    TEXT DATA BSS
  #3 [000009d400 - 0000100000]    BIOS reserved
  #4 [0000aa5000 - 0000aa50eb]              BRK
  #5 [0000008000 - 000000a000]          PGTABLE
  #6 [000000a000 - 0000010000]          PGTABLE
  #7 [0000100000 - 00001a0040]       MEMNODEMAP
found SMP MP-table at [ffff8800000f9bf0] f9bf0
 [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
 [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00280000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x0000009d
    0: 0x00000100 -> 0x0007fff9
    0: 0x00100000 -> 0x00180000
    1: 0x00180000 -> 0x00280000
On node 0 totalpages: 1048470
  DMA zone: 56 pages used for memmap
  DMA zone: 2481 pages reserved
  DMA zone: 1460 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 505905 pages, LIFO batch:31
  Normal zone: 7168 pages used for memmap
  Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048576
  Normal zone: 14336 pages used for memmap
  Normal zone: 1034240 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf2500000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 0, address 0xf2500000, GSI 24-27
ACPI: IOAPIC (id[0x0a] address[0xf2501000] gsi_base[28])
IOAPIC[2]: apic_id 10, version 0, address 0xf2501000, GSI 28-31
ACPI: IOAPIC (id[0x0b] address[0xf2600000] gsi_base[32])
IOAPIC[3]: apic_id 11, version 0, address 0xf2600000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 000000007fff9000 - 000000007fffa000
PM: Registered nosave memory: 000000007fffa000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Allocated 20 4k pages, static data 80288 bytes
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 2058725
Policy zone: Normal
Kernel command line: root=/dev/sda7 resume=/dev/sda10
Initializing CPU#0
NR_IRQS:33024 nr_irqs:984
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2593.648 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 8196716k/10485760k available (3894k kernel code, 2097576k absent, 191468k reserved, 1899k data, 1104k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Calibrating delay loop (skipped), value calculated using timer frequency.. 5189.43 BogoMIPS (lpj=8645493)
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5187.95 BogoMIPS (lpj=8643125)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Dual Core AMD Opteron(tm) Processor 285 stepping 02
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5187.97 BogoMIPS (lpj=8643158)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Dual Core AMD Opteron(tm) Processor 285 stepping 02
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5187.97 BogoMIPS (lpj=8643165)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Dual Core AMD Opteron(tm) Processor 285 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (20753.33 BogoMIPS).
net_namespace: 1400 bytes
NET: Registered protocol family 16
node 0 link 0: io port [2000, 3fff]
node 0 link 2: io port [1000, 1fff]
node 1 link 0: io port [e000, efff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 1 link 0: mmio [e8000000, efffffff]
node 0 link 0: mmio [febf0000, febfffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, f20fffff]
node 0 link 2: mmio [f2100000, f25fffff]
node 1 link 0: mmio [f2600000, f26fffff]
TOM2: 0000000280000000 aka 10240M
bus: [00,3f] on node 0 link 0
bus: 00 index 0 io port: [2000, dfff]
bus: 00 index 1 io port: [0, fff]
bus: 00 index 2 io port: [f000, ffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [f2700000, ffffffff]
bus: 00 index 5 mmio: [80000000, e7ffffff]
bus: 00 index 6 mmio: [f0000000, f20fffff]
bus: 00 index 7 mmio: [280000000, fcffffffff]
bus: [40,7f] on node 0 link 2
bus: 40 index 0 io port: [1000, 1fff]
bus: 40 index 1 mmio: [f2100000, f25fffff]
bus: [80,ff] on node 1 link 0
bus: 80 index 0 io port: [e000, efff]
bus: 80 index 1 mmio: [e8000000, efffffff]
bus: 80 index 2 mmio: [f2600000, f26fffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0xfb00-0xfbff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10 io port: [0x3880-0x389f]
pci 0000:00:01.1: reg 20 io port: [0x3800-0x383f]
pci 0000:00:01.1: reg 24 io port: [0x3840-0x387f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xf2000000-0xf2000fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfebf0000-0xfebf00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:00:04.0: reg 14 io port: [0x3400-0x34ff]
pci 0000:00:04.0: reg 18 32bit mmio: [0xf2001000-0xf2001fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20 io port: [0x38a0-0x38af]
pci 0000:00:07.0: reg 10 io port: [0x38d0-0x38d7]
pci 0000:00:07.0: reg 14 io port: [0x38f8-0x38fb]
pci 0000:00:07.0: reg 18 io port: [0x38d8-0x38df]
pci 0000:00:07.0: reg 1c io port: [0x38fc-0x38ff]
pci 0000:00:07.0: reg 20 io port: [0x38b0-0x38bf]
pci 0000:00:07.0: reg 24 32bit mmio: [0xf2002000-0xf2002fff]
pci 0000:00:08.0: reg 10 io port: [0x38e0-0x38e7]
pci 0000:00:08.0: reg 14 io port: [0x3c00-0x3c03]
pci 0000:00:08.0: reg 18 io port: [0x38e8-0x38ef]
pci 0000:00:08.0: reg 1c io port: [0x3c04-0x3c07]
pci 0000:00:08.0: reg 20 io port: [0x38c0-0x38cf]
pci 0000:00:08.0: reg 24 32bit mmio: [0xf2003000-0xf2003fff]
pci 0000:00:0a.0: reg 10 32bit mmio: [0xf2004000-0xf2004fff]
pci 0000:00:0a.0: reg 14 io port: [0x38f0-0x38f7]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:0a:00.0: reg 10 32bit mmio: [0xf0000000-0xf0ffffff]
pci 0000:0a:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:0a:00.0: reg 1c 64bit mmio: [0xf1000000-0xf1ffffff]
pci 0000:0a:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:0a:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPA._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci 0000:40:01.1: reg 10 64bit mmio: [0xf2500000-0xf2500fff]
pci 0000:40:02.1: reg 10 64bit mmio: [0xf2501000-0xf2501fff]
pci 0000:61:06.0: reg 10 io port: [0x1000-0x10ff]
pci 0000:61:06.0: reg 14 64bit mmio: [0xf2100000-0xf21fffff]
pci 0000:61:06.0: reg 1c 64bit mmio: [0xf2200000-0xf22fffff]
pci 0000:61:06.0: reg 30 32bit mmio: [0x000000-0x0fffff]
pci 0000:61:06.0: supports D1 D2
pci 0000:61:06.1: reg 10 io port: [0x1400-0x14ff]
pci 0000:61:06.1: reg 14 64bit mmio: [0xf2300000-0xf23fffff]
pci 0000:61:06.1: reg 1c 64bit mmio: [0xf2400000-0xf24fffff]
pci 0000:61:06.1: reg 30 32bit mmio: [0x000000-0x0fffff]
pci 0000:61:06.1: supports D1 D2
pci 0000:40:02.0: bridge io port: [0x1000-0x1fff]
pci 0000:40:02.0: bridge 32bit mmio: [0xf2100000-0xf24fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.GLMA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.GLMB._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:80)
pci 0000:80:01.0: reg 10 io port: [0xeb00-0xebff]
pci 0000:80:01.0: reg 14 32bit mmio: [0xf2600000-0xf2600fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKW] (IRQs *48), disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs *49), disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs *50), disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs *51), disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0f: mem resource (0x0-0x9ffff) overlaps 0000:61:06.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:0f: mem resource (0xe8000-0xfffff) overlaps 0000:61:06.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:0f: mem resource (0xd6000-0xdffff) overlaps 0000:61:06.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:0f: mem resource (0x0-0x9ffff) overlaps 0000:61:06.1 BAR 6 (0x0-0xfffff), disabling
pnp 00:0f: mem resource (0xe8000-0xfffff) overlaps 0000:61:06.1 BAR 6 (0x0-0xfffff), disabling
pnp 00:0f: mem resource (0xd6000-0xdffff) overlaps 0000:61:06.1 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x400-0x47f has been reserved
system 00:0c: ioport range 0x480-0x48f has been reserved
system 00:0c: ioport range 0xf800-0xf87f has been reserved
system 00:0c: ioport range 0xf880-0xf8ff has been reserved
system 00:0c: ioport range 0xf900-0xf97f has been reserved
system 00:0c: ioport range 0xf980-0xf9ff has been reserved
system 00:0c: ioport range 0xfa00-0xfa7f has been reserved
system 00:0c: ioport range 0xfa80-0xfaff has been reserved
system 00:0c: ioport range 0xfc00-0xfc7f has been reserved
system 00:0c: ioport range 0xfc80-0xfcff has been reserved
system 00:0c: ioport range 0xfe00-0xfe7f has been reserved
system 00:0c: ioport range 0xfe80-0xfeff has been reserved
system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0f: iomem range 0xfec01000-0xffffffff has been reserved
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
pci 0000:00:09.0:   IO window: disabled
pci 0000:00:09.0:   MEM window: disabled
pci 0000:00:09.0:   PREFETCH window: disabled
pci 0000:0a:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:0e.0:   IO window: 0x2000-0x2fff
pci 0000:00:0e.0:   MEM window: 0xf0000000-0xf1ffffff
pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:40:02.0: BAR 9: can't allocate mem resource [0xf2600000-0xf25fffff]
pci 0000:40:01.0: PCI bridge, secondary bus 0000:41
pci 0000:40:01.0:   IO window: disabled
pci 0000:40:01.0:   MEM window: disabled
pci 0000:40:01.0:   PREFETCH window: disabled
pci 0000:61:06.0: BAR 6: can't allocate mem resource [0xf2500000-0xf24fffff]
pci 0000:61:06.1: BAR 6: can't allocate mem resource [0xf2500000-0xf24fffff]
pci 0000:40:02.0: PCI bridge, secondary bus 0000:61
pci 0000:40:02.0:   IO window: 0x1000-0x1fff
pci 0000:40:02.0:   MEM window: 0xf2100000-0xf24fffff
pci 0000:40:02.0:   PREFETCH window: disabled
pci_bus 0000:00: resource 0 io:  [0x2000-0xdfff]
pci_bus 0000:00: resource 1 io:  [0x00-0xfff]
pci_bus 0000:00: resource 2 io:  [0xf000-0xffff]
pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
pci_bus 0000:00: resource 4 mem: [0xf2700000-0xffffffff]
pci_bus 0000:00: resource 5 mem: [0x80000000-0xe7ffffff]
pci_bus 0000:00: resource 6 mem: [0xf0000000-0xf20fffff]
pci_bus 0000:00: resource 7 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:05: resource 3 io:  [0x2000-0xdfff]
pci_bus 0000:05: resource 4 io:  [0x00-0xfff]
pci_bus 0000:05: resource 5 io:  [0xf000-0xffff]
pci_bus 0000:05: resource 6 mem: [0x0a0000-0x0bffff]
pci_bus 0000:05: resource 7 mem: [0xf2700000-0xffffffff]
pci_bus 0000:05: resource 8 mem: [0x80000000-0xe7ffffff]
pci_bus 0000:05: resource 9 mem: [0xf0000000-0xf20fffff]
pci_bus 0000:05: resource 10 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:0a: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:0a: resource 1 mem: [0xf0000000-0xf1ffffff]
pci_bus 0000:0a: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:40: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:40: resource 1 mem: [0xf2100000-0xf25fffff]
pci_bus 0000:61: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:61: resource 1 mem: [0xf2100000-0xf24fffff]
pci_bus 0000:80: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:80: resource 1 mem: [0xe8000000-0xefffffff]
pci_bus 0000:80: resource 2 mem: [0xf2600000-0xf26fffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
cpu0(4) debug files 130
cpu1(4) debug files 130
cpu2(4) debug files 130
cpu3(4) debug files 130
audit: initializing netlink socket (disabled)
type=2000 audit(1253330664.480:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16009
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:0a:00.0: Boot video device
pci 0000:40:01.0: MSI quirk detected; subordinate MSI disabled
disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:40:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:40:02.0: MSI quirk detected; subordinate MSI disabled
disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:40:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
  alloc irq_desc for 56 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:0e.0: irq 56 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf2)
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x38a0-0x38a7
    ide1: BM-DMA at 0x38a8-0x38af
Probing IDE interface ide0...
hda: LITE-ON DVDRW LH-20A1P, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25 
Driver 'ch' needs updating - please use bus_type methods
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
  alloc irq_desc for 23 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, high) -> IRQ 23
sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x38d0 ctl 0x38f8 bmdma 0x38b0 irq 23
ata2: SATA max UDMA/133 cmd 0x38d8 ctl 0x38fc bmdma 0x38b8 irq 23
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
  alloc irq_desc for 22 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA1] -> GSI 22 (level, high) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x38e0 ctl 0x3c00 bmdma 0x38c0 irq 22
ata4: SATA max UDMA/133 cmd 0x38e8 ctl 0x3c04 bmdma 0x38c8 irq 22
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
  alloc irq_desc for 21 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, high) -> IRQ 21
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
  alloc irq_desc for 30 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
mptspi 0000:61:06.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
mptbase: ioc0: Initiating bringup
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
ata1.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3750640AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi4 : ioc0: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=30
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST3750640AS      3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:<5>scsi 2:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
 sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 sdd2
sd 3:0:0:0: [sdd] Attached SCSI disk
  alloc irq_desc for 31 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
mptspi 0000:61:06.1: PCI INT B -> GSI 31 (level, low) -> IRQ 31
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
scsi5 : ioc1: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=31
scsi 5:0:5:0: Sequential-Access HP       DAT72X6          B604 PQ: 0 ANSI: 3
scsi target5:0:5: Beginning Domain Validation
scsi target5:0:5: Domain Validation skipping write tests
scsi target5:0:5: Ending Domain Validation
scsi target5:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 32)
st 5:0:5:0: Attached scsi tape st0
st 5:0:5:0: st0: try direct i/o: yes (alignment 4 B)
st 5:0:5:0: Attached scsi generic sg4 type 1
scsi 5:0:5:1: Medium Changer    HP       DAT72X6          B604 PQ: 0 ANSI: 3
ch0: type #1 (mt): 0x0+0 [medium transport]
ch0: type #2 (st): 0x2+6 [storage]
ch0: type #3 (ie): 0x0+0 [import/export]
ch0: type #4 (dt): 0x1+1 [data transfer]
ch0: dt 0x1: ID 5, LUN 0, name: HP       DAT72X6          B604
ch0: INITIALIZE ELEMENT STATUS, may take some time ...
ch0: ... finished
ch 5:0:5:1: Attached scsi changer ch0
ch 5:0:5:1: Attached scsi generic sg5 type 8
scsi 5:0:6:0: Sequential-Access HP       DAT72X6          B604 PQ: 0 ANSI: 3
scsi target5:0:6: Beginning Domain Validation
scsi target5:0:6: Domain Validation skipping write tests
scsi target5:0:6: Ending Domain Validation
scsi target5:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 32)
st 5:0:6:0: Attached scsi tape st1
st 5:0:6:0: st1: try direct i/o: yes (alignment 4 B)
st 5:0:6:0: Attached scsi generic sg6 type 1
scsi 5:0:6:1: Medium Changer    HP       DAT72X6          B604 PQ: 0 ANSI: 3
ch1: type #1 (mt): 0x0+0 [medium transport]
ch1: type #2 (st): 0x2+6 [storage]
ch1: type #3 (ie): 0x0+0 [import/export]
ch1: type #4 (dt): 0x1+1 [data transfer]
ch1: dt 0x1: ID 6, LUN 0, name: HP       DAT72X6          B604
ch1: INITIALIZE ELEMENT STATUS, may take some time ...
ch1: ... finished
ch 5:0:6:1: Attached scsi changer ch1
ch 5:0:6:1: Attached scsi generic sg7 type 8
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 20
  alloc irq_desc for 20 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LSB2] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfebf0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30.7-alb ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 23
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LSB0] -> GSI 23 (level, high) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xf2000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30.7-alb ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-onetouch
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
md: raid0 personality registered for level 0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
EDAC MC: Ver: 2.1.0 Sep 17 2009
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
Intel ICH 0000:00:04.0: PCI INT A -> Link[LACI] -> GSI 22 (level, high) -> IRQ 22
Intel ICH 0000:00:04.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
intel8x0_measure_ac97_clock: measured 53259 usecs (2448 samples)
intel8x0: clocking to 50126
ALSA device list:
  #0: NVidia CK804 with AD1981B at irq 22
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2009-09-19 03:24:38 UTC (1253330678)
Initalizing network drop monitor service
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: New USB device found, idVendor=056a, idProduct=0065
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: MTE-450
usb 2-1: Manufacturer: Wacom Co.,Ltd.
usb 2-1: configuration #1 chosen from 1 choice
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
Freeing unused kernel memory: 1104k freed
Write protecting the kernel read-only data: 5348k
udev: starting version 141
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
processor ACPI_CPU:02: registered as cooling_device2
processor ACPI_CPU:03: registered as cooling_device3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: Wacom Bamboo as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input5
usbcore: registered new interface driver wacom
wacom: v1.50:USB Wacom Graphire and Wacom Intuos tablet driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3800
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3840
tpm_inf_pnp 00:0a: Found TPM with ID IFX0101
tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0x4c0, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
  alloc irq_desc for 19 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
nvidia 0000:0a:00.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, high) -> IRQ 19
nvidia 0000:0a:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.31  Tue Jul 28 17:52:27 PDT 2009
md: md0 stopped.
md: bind<sdd2>
md: bind<sdc2>
md0: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdc2
raid0:   comparing sdc2(2921870016)<6> with sdc2(2921870016)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdd2
raid0:   comparing sdd2(2921870016)<6> with sdc2(2921870016)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 5843740032 sectors.
raid0 : conf->spacing is 5843740032 sectors.
raid0 : nb_zone is 2.
raid0 : Allocating 16 bytes for hash.
 md0: unknown partition table
EXT3 FS on sda7, internal journal
EXT4-fs: barriers enabled
kjournald2 starting: pid 3196, dev sda8:8, commit interval 5 seconds
EXT4 FS on sda8, internal journal on sda8:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda8 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 3197, dev sda11:8, commit interval 5 seconds
EXT4 FS on sda11, internal journal on sda11:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda11 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 3198, dev sda12:8, commit interval 5 seconds
EXT4 FS on sda12, internal journal on sda12:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda12 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 3199, dev sdb1:8, commit interval 5 seconds
EXT4 FS on sdb1, internal journal on sdb1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sdb1 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 3200, dev md0:8, commit interval 5 seconds
EXT4 FS on md0, internal journal on md0:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem md0 with ordered data mode
st1: Block limits 1 - 16777215 bytes.
Adding 12008548k swap on /dev/sda10.  Priority:0 extents:1 across:12008548k 
Adding 4200956k swap on /dev/sdc1.  Priority:0 extents:1 across:4200956k 
Adding 4200956k swap on /dev/sdd1.  Priority:0 extents:1 across:4200956k 
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
smsc47b397: found SMSC LPC47B397-NC (base address 0x0480, revision 1)
nvclock:4729 freeing invalid memtype f0000000-f0010000
nvclock:4729 freeing invalid memtype f0010000-f0030000
/dev/vmmon[4906]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4906]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
/dev/vmmon[4906]: Module vmmon: initialized
/dev/vmci[4924]: VMCI: Driver initialized.
/dev/vmci[4924]: Module vmci: registered with major=10 minor=58
/dev/vmci[4924]: Module vmci: initialized
/dev/vmnet: open called by PID 4973 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
nvclock:5541 freeing invalid memtype f0000000-f0010000
nvclock:5541 freeing invalid memtype f0010000-f0030000
NVRM: API mismatch: the client has the version 180.60, but
NVRM: this kernel module has the version 185.18.31.  Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
NVRM: API mismatch: the client has the version 180.60, but
NVRM: this kernel module has the version 185.18.31.  Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
NVRM: API mismatch: the client has the version 180.60, but
NVRM: this kernel module has the version 185.18.31.  Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
/dev/vmci[14225]: Module vmci: unloaded
/dev/vmmon[14242]: Module vmmon: unloaded
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
nvidia 0000:0a:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.60  Mon May 11 15:27:42 PDT 2009
IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
usb 2-6: new full speed USB device using ohci_hcd and address 3
usb 2-6: New USB device found, idVendor=0403, idProduct=e0d0
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Aardvark I2C/SPI Host Adapter
usb 2-6: Manufacturer: Total Phase
usb 2-6: SerialNumber: TPCFWdA/
usb 2-6: configuration #1 chosen from 1 choice
IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
usb 2-6: USB disconnect, address 3
usb 2-6: new full speed USB device using ohci_hcd and address 4
usb 2-6: New USB device found, idVendor=0403, idProduct=e0d0
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Aardvark I2C/SPI Host Adapter
usb 2-6: Manufacturer: Total Phase
usb 2-6: SerialNumber: TPCFWdA/
usb 2-6: configuration #1 chosen from 1 choice
usb 2-6: USB disconnect, address 4
usb 2-6: new full speed USB device using ohci_hcd and address 5
usb 2-6: New USB device found, idVendor=0403, idProduct=e0d0
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Aardvark I2C/SPI Host Adapter
usb 2-6: Manufacturer: Total Phase
usb 2-6: SerialNumber: TPCFWdA/
usb 2-6: configuration #1 chosen from 1 choice
usb 2-6: USB disconnect, address 5
usb 2-6: new full speed USB device using ohci_hcd and address 6
usb 2-6: New USB device found, idVendor=0403, idProduct=e0d0
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Aardvark I2C/SPI Host Adapter
usb 2-6: Manufacturer: Total Phase
usb 2-6: SerialNumber: TPCFWdA/
usb 2-6: configuration #1 chosen from 1 choice
IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
usb 2-6: USB disconnect, address 6
usb 2-6: new full speed USB device using ohci_hcd and address 7
usb 2-6: New USB device found, idVendor=0403, idProduct=e0d0
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Aardvark I2C/SPI Host Adapter
usb 2-6: Manufacturer: Total Phase
usb 2-6: SerialNumber: TPCFWdA/
usb 2-6: configuration #1 chosen from 1 choice
IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
usb 2-6: USB disconnect, address 7
usb 2-6: new full speed USB device using ohci_hcd and address 8
usb 2-6: New USB device found, idVendor=0403, idProduct=e0d0
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Aardvark I2C/SPI Host Adapter
usb 2-6: Manufacturer: Total Phase
usb 2-6: SerialNumber: TPCFWdA/
usb 2-6: configuration #1 chosen from 1 choice