X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.27-gentoo-r8 x86_64 Current Operating System: Linux gentoo-imac 2.6.27-gentoo-r8 #1 SMP Wed Sep 2 18:39:40 EDT 2009 x86_64 Build Date: 02 September 2009 07:00:33PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 2 19:10:03 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "aticonfig-Screen[0]-0" (0) (**) | |-->Monitor "aticonfig-Monitor[0]-0" (**) | |-->Device "aticonfig-Device[0]-0" (**) Option "AIGLX" "On" (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/misc/"). (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/Type1/" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). (==) FontPath set to: /usr/share/fonts/75dpi/, built-ins (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x1200 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon HD 2400 XT rev 0, Mem @ 0x40000000/268435456, 0x50620000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (**) AIGLX enabled (**) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "fglrx" (II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.4.99.906, module version = 8.64.3 Module class: X.Org Video Driver (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) ATI Proprietary Linux Driver Version Identifier:8.64.3 (II) ATI Proprietary Linux Driver Release Identifier: 8.64 (II) ATI Proprietary Linux Driver Build Date: Jul 14 2009 21:18:29 (II) Loading PCS database from /etc/ati/amdpcsdb (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0 (WW) Video driver ABI version of the X server is 4.1 (--) Chipset Supported AMD Graphics Processor (0x94C8) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) fglrx(0): pEnt->device->identifier=0x7e8080 (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.3, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "DPMS" "true" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (==) fglrx(0): Gamma Correction for I is 0x06419064 (==) fglrx(0): Gamma Correction for II is 0x06419064 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib64/xorg/modules/linux//libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.4.99.906, module version = 8.64.3 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID PCI:1:0:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports PCI:1:0:0 (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2400 XT" (Chipset = 0x94c8) (--) fglrx(0): (PciSubVendor = 0x106b, PciSubDevice = 0x0084) (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0x40000000 (--) fglrx(0): MMIO registers at 0x50620000 (--) fglrx(0): I/O port at 0x00003000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib64/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.1.0 ABI class: X.Org Video Driver, version 4.1 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 10.56 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: M74 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 131072 kByte, Type: DDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) (II) fglrx(0): [pcie] 503808 kB allocated (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536 (II) fglrx(0): Interrupt handler installed at IRQ 377. (II) fglrx(0): IRQ 377 Enabled. (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000 (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds] (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: APP Model: 9c6b Serial#: 16843009 (II) fglrx(0): Year: 2006 Week: 0 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 43 vert.: 27 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): No DPMS capabilities specified (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 (II) fglrx(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 119.2 MHz Image Size: 433 x 270 mm (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 (WW) fglrx(0): Unknown vendor-specific block 1 (II) fglrx(0): M201EW02 VB (II) fglrx(0): Monitor name: Color LCD (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0006106b9c01010101 (II) fglrx(0): 00100103802b1b780a6085a6564a9c25 (II) fglrx(0): 12505400000001010101010101010101 (II) fglrx(0): 010101010101932e90a0601a1e403020 (II) fglrx(0): 3600b10e110000180000000100061030 (II) fglrx(0): 11080000000000000a20000000fe004d (II) fglrx(0): 32303145573032205642200a000000fc (II) fglrx(0): 00436f6c6f72204c43440a2020200000 (II) fglrx(0): End of Display1 EDID data -------------------- (II) fglrx(0): Output LCD using monitor section aticonfig-Monitor[0]-0 (II) fglrx(0): Output DFP1 has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output TV has no monitor section (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section (II) fglrx(0): EDID vendor "APP", prod id 40043 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1680x1050"x0.0 119.23 1680 1728 1760 1840 1050 1053 1059 1080 -hsync -vsync (64.8 kHz) (II) fglrx(0): Output LCD connected (II) fglrx(0): Output DFP1 disconnected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output TV disconnected (II) fglrx(0): Output COMPONENT_VIDEO disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output LCD using initial mode 1680x1050 (**) fglrx(0): Display dimensions: (430, 270) mm (**) fglrx(0): DPI set to (99, 158) (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (==) fglrx(0): QBS disabled (==) fglrx(0): FAST_SWAP disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib64/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.2.1 ABI class: X.Org Video Driver, version 4.1 (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): cpuFlags: 0x8000001d (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906 (II) fglrx(0): detected X.org 7.4.3.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID PCI:1:0:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports PCI:1:0:0 (II) [drm] DRM interface version 1.0 (II) [drm] DRM open master succeeded. (II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables. (II) fglrx(0): [drm] framebuffer handle = 0x3000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.64.3 (II) fglrx(0): Date: Jul 14 2009 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-gentoo-r8 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0x00005000 (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000