dmesg

dmesg.txt (text/plain), 33.05 KB, created by labor_ratte on 2009-08-26 12:41:44 UTC

Linux version 2.6.30.5 (root@chefkoch) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Tue Aug 18 09:57:04 CEST 2009
Command line: root=/dev/sda7 ro panic=5 usbhid.mousepoll=4 video=uvesafb:1280x1024-32,nomtrr 
KERNEL supported cpus:
  AMD AuthenticAMD
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable)
 BIOS-e820: 00000000cfef0000 - 00000000cfef3000 (ACPI NVS)
 BIOS-e820: 00000000cfef3000 - 00000000cff00000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x230000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFF0000000 write-back
  3 base 0100000000 mask FF00000000 write-back
  4 base 0200000000 mask FFE0000000 write-back
  5 base 0220000000 mask FFF0000000 write-back
  6 base 00CFF00000 mask FFFFF00000 uncachable
  7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8704MB, range: 256MB, type WB
reg 6, base: 3327MB, range: 1MB, type UC
total RAM coverred: 3327M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfef0 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000cfef0000
 0000000000 - 00cfe00000 page 2M
 00cfe00000 - 00cfef0000 page 4k
kernel direct mapping tables up to cfef0000 @ 10000-16000
init_memory_mapping: 0000000100000000-0000000230000000
 0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ 14000-1e000
ACPI: RSDP 00000000000f7640 00024 (v02 Nvidia)
ACPI: XSDT 00000000cfef3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000cfef9d80 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000cfef3280 06AC0 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfef0000 00040
ACPI: SSDT 00000000cfef9f80 00248 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000cfefa240 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000cfefa2c0 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000cfef9ec0 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 0230000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 000074cce0]    TEXT DATA BSS ==> [0000200000 - 000074cce0]
  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #4 [000074d000 - 000074d14d]              BRK ==> [000074d000 - 000074d14d]
  #5 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
  #6 [0000014000 - 0000019000]          PGTABLE ==> [0000014000 - 0000019000]
 [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002fdfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000cfef0
    0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096767
  DMA zone: 56 pages used for memmap
  DMA zone: 1465 pages reserved
  DMA zone: 2462 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833320 pages, LIFO batch:31
  Normal zone: 17024 pages used for memmap
  Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880028034000, static data 71200 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063942
Kernel command line: root=/dev/sda7 ro panic=5 usbhid.mousepoll=4 video=uvesafb:1280x1024-32,nomtrr 
Initializing CPU#0
NR_IRQS:320
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2760.273 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 81c0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Memory: 8175568k/9175040k available (3456k kernel code, 787972k absent, 210748k reserved, 1087k data, 464k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5522.56 BogoMIPS (lpj=9200910)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5522.41 BogoMIPS (lpj=9200664)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02
Brought up 2 CPUs
Total of 2 processors activated (11045.98 BogoMIPS).
net_namespace: 936 bytes
NET: Registered protocol family 16
node 0 link 0: io port [a000, ffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e02fffff]
TOM2: 0000000230000000 aka 8960M
bus: [00,02] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [d0000000, efffffff]
bus: 00 index 3 mmio: [f0000000, ffffffff]
bus: 00 index 4 mmio: [230000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f]
pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f]
pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f]
pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:14.0: reg 14 io port: [0xc800-0xc807]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xac00-0xac7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff]
pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
pci 0000:00:04.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:09.0: reg 10 32bit mmio: [0xfdef0000-0xfdefffff]
pci 0000:00:10.0: transparent bridge
pci 0000:00:10.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:10.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:01: ioport range 0x2000-0x207f has been reserved
system 00:01: ioport range 0x2080-0x20ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved
system 00:0b: iomem range 0xcfef0000-0xcfefffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0xcfeeffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0:   IO window: 0xa000-0xafff
pci 0000:00:04.0:   MEM window: 0xf8000000-0xfbffffff
pci 0000:00:04.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
pci 0000:00:10.0:   IO window: 0xb000-0xbfff
pci 0000:00:10.0:   MEM window: 0xfde00000-0xfdefffff
pci 0000:00:10.0:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 15969
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:04.0: setting latency timer to 64
uvesafb: NVIDIA Corporation, G84 Board - p401h00 , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz
uvesafb: scrolling: redraw
Console: switching to colour frame buffer device 160x64
uvesafb: framebuffer at 0xf9000000, mapped to 0xffffc20010100000, using 10240k, total 14336k
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
processor ACPI_CPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
Linux agpgart interface v0.103
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:be:a8:ed
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 20, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2400 processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xf (2300 MHz), vid 0xe
powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xf
powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x11
powernow-k8:    3 : fid 0xa (1800 MHz), vid 0x13
powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x16
rtc_cmos 00:05: setting system clock to 2009-08-26 10:53:30 UTC (1251284010)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD322HJ, 1AC01110, max UDMA7
ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AC0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: HID 1241:1166 as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:1241:1166.0001: input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:0b.0-1/input0
usb 2-2: new full speed USB device using ohci_hcd and address 3
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-2: configuration #1 chosen from 1 choice
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
ata4: SATA link down (SStatus 0 SControl 300)
ata6.01: NODEV after polling detection
ata6.00: ATAPI: BENQ    DVD DD DW1640, BSRB, max UDMA/33
ata6: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
ata6.00: configured for UDMA/33
scsi 5:0:0:0: CD-ROM            BENQ     DVD DD DW1640    BSRB PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
REISERFS (device sda7): found reiserfs format "3.6" with standard journal
REISERFS (device sda7): using ordered data mode
REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda7): checking transaction log (sda7)
REISERFS (device sda7): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 8:7.
Freeing unused kernel memory: 464k freed
udev: starting version 145
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ath5k 0000:02:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
ath5k 0000:02:09.0: registered as 'phy0'
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:10.1: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.25  Thu Aug 20 16:36:08 PDT 2009
REISERFS (device sda5): found reiserfs format "3.6" with standard journal
REISERFS (device sda5): using ordered data mode
REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30
REISERFS (device sda5): checking transaction log (sda5)
REISERFS (device sda5): Using r5 hash to sort names
REISERFS (device sda6): found reiserfs format "3.6" with standard journal
REISERFS (device sda6): using ordered data mode
REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30
REISERFS (device sda6): checking transaction log (sda6)
REISERFS (device sda6): Using r5 hash to sort names
REISERFS (device sda8): found reiserfs format "3.6" with standard journal
REISERFS (device sda8): using ordered data mode
REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda8): checking transaction log (sda8)
REISERFS (device sda8): Using r5 hash to sort names
Adding 2104504k swap on /dev/sda2.  Priority:-1 extents:1 across:2104504k 
wlan0: authenticate with AP 00:1a:4f:96:60:54
wlan0: authenticated
wlan0: associate with AP 00:1a:4f:96:60:54
wlan0: RX AssocResp from 00:1a:4f:96:60:54 (capab=0x451 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
	(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
	(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Clocksource tsc unstable (delta = -227067964 ns)
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.25  Thu Aug 20 16:36:08 PDT 2009
v86d[40]: segfault at 0 ip 00000000004008b9 sp 00007fffa8f6a830 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[559]: segfault at 0 ip 00000000004008b9 sp 00007fffd0f67640 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[562]: segfault at 0 ip 00000000004008b9 sp 00007fffb0d5fa20 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[565]: segfault at 0 ip 00000000004008b9 sp 00007fff03113ea0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[568]: segfault at 0 ip 00000000004008b9 sp 00007fffa724a390 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[571]: segfault at 0 ip 00000000004008b9 sp 00007fff3275d120 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[574]: segfault at 0 ip 00000000004008b9 sp 00007ffff68634b0 error 4 in v86d[400000+1a000]
uvesafb: VBE state restore call failed (eax=0x4f04, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[577]: segfault at 0 ip 00000000004008b9 sp 00007fffebdcd330 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[580]: segfault at 0 ip 00000000004008b9 sp 00007fffb51890e0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[583]: segfault at 0 ip 00000000004008b9 sp 00007fff1375b2d0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[586]: segfault at 0 ip 00000000004008b9 sp 00007fffcf49dae0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[589]: segfault at 0 ip 00000000004008b9 sp 00007fff79e58050 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[594]: segfault at 0 ip 00000000004008b9 sp 00007fffdb1bbf10 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[597]: segfault at 0 ip 00000000004008b9 sp 00007fffb51175a0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[601]: segfault at 0 ip 00000000004008b9 sp 00007fffd3cba2a0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[604]: segfault at 0 ip 00000000004008b9 sp 00007fff6233ad50 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[607]: segfault at 0 ip 00000000004008b9 sp 00007fffb55b7320 error 4 in v86d[400000+1a000]
uvesafb: VBE state restore call failed (eax=0x4f04, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[716]: segfault at 0 ip 00000000004008b9 sp 00007ffffa805b10 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[719]: segfault at 0 ip 00000000004008b9 sp 00007fffdb864a80 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[722]: segfault at 0 ip 00000000004008b9 sp 00007fff7d920610 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[725]: segfault at 0 ip 00000000004008b9 sp 00007fff35fa2ae0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[728]: segfault at 0 ip 00000000004008b9 sp 00007fff6f8398a0 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[736]: segfault at 0 ip 00000000004008b9 sp 00007fff1d2cf120 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[739]: segfault at 0 ip 00000000004008b9 sp 00007fff2e4b5f70 error 4 in v86d[400000+1a000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[742]: segfault at 0 ip 00000000004008b9 sp 00007fff842299b0 error 4 in v86d[400000+1a000]
uvesafb: VBE state restore call failed (eax=0x4f04, err=1)