>e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: enabling bus mastering
uhci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb1: root hub lost power or was reset
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: enabling bus mastering
uhci_hcd 0000:00:1a.1: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: enabling bus mastering
uhci_hcd 0000:00:1a.2: setting latency timer to 64
usb usb3: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: PME# disabled
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: enabling bus mastering
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: enabling bus mastering
HDA Intel 0000:00:1b.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: enabling bus mastering
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: enabling bus mastering
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb5: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: enabling bus mastering
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb6: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PME# disabled
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: enabling bus mastering
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: setting latency timer to 64
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
usb 7-6: reset high speed USB device using ehci_hcd and address 3
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: enabling bus mastering
pci 0000:00:02.0: setting latency timer to 64
PM: Finishing wakeup.
Restarting all filesystems ...
Restarting tasks ... done.
ADDRCONF(NETDEV_UP): eth0: link is not ready
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 2-2: new full speed USB device using uhci_hcd and address 19
usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
usb 2-2: Manufacturer: Lenovo Computer Corp
usb 2-2: configuration #1 chosen from 1 choice
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input33
wlan0: authenticate with AP 02:14:bf:38:ca:38
wlan0: authenticated
wlan0: associate with AP 02:14:bf:38:ca:38
wlan0: RX AssocResp from 02:14:bf:38:ca:38 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 2-2: USB disconnect, address 19
wlan0: disassociating by local choice (reason=3)
wlan0: deauthenticating by local choice (reason=3)
[drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Stopping fuse filesystems.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Stopping normal filesystems.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
pci 0000:00:02.0: PCI INT A disabled
pci 0000:00:02.0: power state changed by ACPI to D3
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
iwlagn 0000:03:00.0: PCI INT A disabled
ahci 0000:00:1f.2: PCI INT B disabled
ehci_hcd 0000:00:1d.7: PCI INT D disabled
ehci_hcd 0000:00:1d.7: PME# disabled
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
iwlagn 0000:03:00.0: HARDWARE GONE?? INTA == 0xffffffff
HDA Intel 0000:00:1b.0: PCI INT B disabled
ehci_hcd 0000:00:1a.7: PCI INT D disabled
ehci_hcd 0000:00:1a.7: PME# disabled
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
uhci_hcd 0000:00:1a.2: PCI INT C disabled
uhci_hcd 0000:00:1a.1: PCI INT B disabled
uhci_hcd 0000:00:1a.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
e1000e 0000:00:19.0: PME# enabled
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
ACPI handle has no context!
ACPI: Preparing to enter system sleep state S3
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
CPU 1 irqstacks, hard=c27b8000 soft=c27b9000
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394016)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
Switched to high resolution mode on CPU 1
CPU1 is up
ACPI: Waking up from system sleep state S3
agpgart-intel 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001)
pci 0000:00:03.2: calling quirk_cardbus_legacy+0x0/0x30
serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
serial 0000:00:03.3: calling quirk_cardbus_legacy+0x0/0x30
e1000e 0000:00:19.0: calling quirk_cardbus_legacy+0x0/0x30
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
uhci_hcd 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30
uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
uhci_hcd 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
uhci_hcd 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x30
ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
ehci_hcd 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
HDA Intel 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30
pcieport-driver 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30
pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
pcieport-driver 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30
pcieport-driver 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
uhci_hcd 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
uhci_hcd 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
uhci_hcd 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
ehci_hcd 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30
ahci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30
i801_smbus 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30
iwlagn 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: PME# disabled
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# disabled
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: enabling bus mastering
uhci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb1: root hub lost power or was reset
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: enabling bus mastering
uhci_hcd 0000:00:1a.1: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: enabling bus mastering
uhci_hcd 0000:00:1a.2: setting latency timer to 64
usb usb3: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: PME# disabled
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: enabling bus mastering
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: enabling bus mastering
HDA Intel 0000:00:1b.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: enabling bus mastering
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: enabling bus mastering
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb5: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: enabling bus mastering
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb6: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PME# disabled
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: enabling bus mastering
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: setting latency timer to 64
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
usb 7-6: reset high speed USB device using ehci_hcd and address 3
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: enabling bus mastering
pci 0000:00:02.0: setting latency timer to 64
PM: Finishing wakeup.
Restarting all filesystems ...
Restarting tasks ... done.
ADDRCONF(NETDEV_UP): eth0: link is not ready
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 2-2: new full speed USB device using uhci_hcd and address 20
usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
usb 2-2: Manufacturer: Lenovo Computer Corp
usb 2-2: configuration #1 chosen from 1 choice
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input34
wlan0: authenticate with AP 02:14:bf:38:ca:38
wlan0: authenticated
wlan0: associate with AP 02:14:bf:38:ca:38
wlan0: RX AssocResp from 02:14:bf:38:ca:38 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present