# Copyright 1999-2009 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Header: $ IUSE="acpi debug" inherit eutils multilib linux-mod toolchain-funcs versionator DESCRIPTION="Ati precompiled drivers for recent chipsets" HOMEPAGE="http://www.ati.com" ATI_URL="https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/" SRC_URI="${ATI_URL}/ati-driver-installer-9-6-x86.x86_64.run" LICENSE="AMD GPL-2 QPL-1.0 as-is" KEYWORDS="~amd64 ~x86" # The portage dep is for COLON_SEPARATED support in env-update. # The eselect dep (>=1.0.9) is for COLON_SEPARATED in eselect env update. RDEPEND=">=x11-base/xorg-server-1.5 !x11-apps/ati-drivers-extra >=app-admin/eselect-1.0.9 app-admin/eselect-opengl sys-libs/libstdc++-v3 amd64? ( app-emulation/emul-linux-x86-xlibs ) acpi? ( x11-apps/xauth sys-power/acpid ) x11-libs/libXrandr >=sys-apps/portage-2.1.1-r1" DEPEND="${RDEPEND} x11-proto/xf86miscproto x11-proto/xf86vidmodeproto x11-proto/inputproto !" eerror " [ ] Paravirtualization support (EXPERIMENTAL)" eerror "in 'menuconfig'" die "CONFIG_PARAVIRT enabled" fi if ! linux_chkconfig_present MAGIC_SYSRQ; then eerror "You need MAGIC_SYSRQ enabled in order to build ati-drivers" die "CONFIG_MAGIC_SYSRQ disabled" fi # Only support xorg-server >=1.5 BASE_DIR="${S}/x740" if ! linux_chkconfig_present PCI_MSI; then eerror "You need PCI_MSI enabled in order to build ati-drivers" die "CONFIG_PCI_MSI disabled" fi # This is used like $(get_libdir) for paths in ati's package. if use amd64 ; then MY_BASE_DIR="${BASE_DIR}_64a" PKG_LIBDIR=lib64 ARCH_DIR="${S}/arch/x86_64" else MY_BASE_DIR="${BASE_DIR}" PKG_LIBDIR=lib ARCH_DIR="${S}/arch/x86" fi } src_unpack() { #Switching to a standard way to extract the files since otherwise no signature file #would be created local src="${DISTDIR}/${A}" sh "${src}" --extract "${S}" 2&>1 /dev/null cd "${S}" epatch "${FILESDIR}"/ati-drivers-xen.patch || die "epatch failed" epatch "${FILESDIR}"/flush_tlb_page-94.patch || die "epatch failed" epatch "${FILESDIR}"/config_x86_32.patch || die "epatch failed" # These are the userspace utilities that we also have source for. # We rebuild these later. rm \ "${ARCH_DIR}"/usr/X11R6/bin/{fgl_glxgears,fglrx_xgamma} \ "${ARCH_DIR}"/usr/X11R6/${PKG_LIBDIR}/libfglrx_gamma* \ || die "bin rm failed" if use debug; then # Enable debug mode in the Source Code. sed -i '/^#define DRM_DEBUG_CODE/s/0/1/' \ "${MODULE_DIR}/firegl_public.c" \ || die "Failed to enable debug output." fi if kernel_is ge 2 6 29; then epatch "${FILESDIR}"/2.6.29_support.patch fi if kernel_is ge 2 6 30; then epatch "${FILESDIR}"/fglrx-2.6.30-irqreturn_t.patch epatch "${FILESDIR}"/fglrx-rt-compat.patch epatch "${FILESDIR}"/fglrx-missing-pci_enable_msi.patch fi if use acpi; then sed -i \ -e "s:/var/lib/xdm/authdir/authfiles/:/var/run/xauth/:" \ -e "s:/var/lib/gdm/:/var/gdm/:" \ "${S}/common/etc/ati/authatieventsd.sh" \ || die "sed failed." # Since "who" is in coreutils, we're using that one instead of "finger". sed -i -e 's:finger:who:' \ "${S}/common/usr/share/doc/fglrx/examples/etc/acpi/ati-powermode.sh" \ || die "Replacing 'finger' with 'who' failed." # Adjust paths in the script from /usr/X11R6/bin/ to /opt/bin/ and # add function to detect default state. epatch "${FILESDIR}"/ati-powermode-opt-path-2.patch || die "Failed to epatch powermode-opt-path-2.patch" fi pushd ${MODULE_DIR} >/dev/null ln -s "${ARCH_DIR}"/lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC$(gcc-major-version) \ || die "symlinking precompiled core failed" convert_to_m 2.6.x/Makefile || die "convert_to_m failed" # When built with ati's make.sh it defines a bunch of macros if # certain .config values are set, falling back to less reliable # detection methods if linux/autoconf.h is not available. We # simply use the linux/autoconf.h settings directly, bypassing the # detection script. sed -i -e 's/__SMP__/CONFIG_SMP/' *.c *h || die "SMP sed failed" sed -i -e 's/ifdef MODVERSIONS/ifdef CONFIG_MODVERSIONS/' *.c *.h \ || die "MODVERSIONS sed failed" popd >/dev/null mkdir extra || die "mkdir failed" cd extra unpack ./../common/usr/src/ati/fglrx_sample_source.tgz sed -i -e 's:include/extensions/extutil.h:X11/extensions/extutil.h:' \ lib/fglrx_gamma/fglrx_gamma.c || die "include fixup failed" # Add a category. mv programs/fglrx_gamma/fglrx_xgamma.{man,1} || die "man mv failed" cd .. } src_compile() { linux-mod_src_compile einfo "Building fgl_glxgears" cd "${S}"/extra/fgl_glxgears # These extra libs/utils either have an Imakefile that does not # work very well without tweaking or a Makefile ignoring CFLAGS # and the like. We bypass those. # The -DUSE_GLU is needed to compile using nvidia headers # according to a comment in ati-drivers-extra-8.33.6.ebuild. "$(tc-getCC)" -o fgl_glxgears ${CFLAGS} ${LDFLAGS} -DUSE_GLU \ -I"${S}"/common/usr/include fgl_glxgears.c \ -lGL -lGLU -lX11 -lm || die "fgl_glxgears build failed" einfo "Building fglrx_gamma lib" cd "${S}"/extra/lib/fglrx_gamma "$(tc-getCC)" -shared -fpic -o libfglrx_gamma.so.1.0 ${CFLAGS} ${LDFLAGS} \ -DXF86MISC -Wl,-soname,libfglrx_gamma.so.1.0 fglrx_gamma.c \ -lXext || die "fglrx_gamma lib build failed" ln -s libfglrx_gamma.so.1.0 libfglrx_gamma.so || die "ln failed" ln -s libfglrx_gamma.so.1.0 libfglrx_gamma.so.1 || die "ln failed" einfo "Building fglrx_gamma util" cd "${S}"/extra/programs/fglrx_gamma "$(tc-getCC)" -o fglrx_xgamma ${CFLAGS} ${LDFLAGS} \ -I../../../common/usr/X11R6/include -L../../lib/fglrx_gamma \ fglrx_xgamma.c -lm -lfglrx_gamma -lX11 \ || die "fglrx_gamma util build failed" } src_install() { linux-mod_src_install # We can do two things here, and neither of them is very nice. # For direct rendering libGL has to be able to load one or more # dri modules (files ending in _dri.so, like fglrx_dri.so). # Gentoo's mesa looks for these files in the location specified by # LIBGL_DRIVERS_PATH or LIBGL_DRIVERS_DIR, then in the hardcoded # location /usr/$(get_libdir)/dri. Ati's libGL does the same # thing, but the hardcoded location is /usr/X11R6/lib/modules/dri # on x86 and amd64 32bit, /usr/X11R6/lib64/modules/dri on amd64 # 64bit. So we can either put the .so files in that (unusual, # compared to "normal" mesa libGL) location or set # LIBGL_DRIVERS_PATH. We currently do the latter. See also bug # 101539. # The problem with this approach is that LIBGL_DRIVERS_PATH # *overrides* the default hardcoded location, it does not extend # it. So if ati-drivers is merged but a non-ati libGL is selected # and its hardcoded path does not match our LIBGL_DRIVERS_PATH # (because it changed in a newer mesa or because it was compiled # for a different set of multilib abis than we are) stuff breaks. # We create one file per ABI to work with "native" multilib, see # below. echo "COLON_SEPARATED=LIBGL_DRIVERS_PATH" > "${T}/03ati-colon-sep" doenvd "${T}/03ati-colon-sep" # All libraries that we have a 32 bit and 64 bit version of on # amd64 are installed in src_install-libs. Everything else # (including libraries only available in native 64bit on amd64) # goes in here. # There used to be some code here that tried to detect running # under a "native multilib" portage ((precursor of) # http://dev.gentoo.org/~kanaka/auto-multilib/). I removed that, it # should just work (only doing some duplicate work). --marienz if has_multilib_profile; then local OABI=${ABI} for ABI in $(get_install_abis); do src_install-libs done ABI=${OABI} unset OABI else src_install-libs fi # This is sorted by the order the files occur in the source tree. # X modules. exeinto /usr/$(get_libdir)/xorg/modules/drivers doexe "${MY_BASE_DIR}"/usr/X11R6/${PKG_LIBDIR}/modules/drivers/fglrx_drv.so exeinto /usr/$(get_libdir)/xorg/modules/linux doexe "${MY_BASE_DIR}"/usr/X11R6/${PKG_LIBDIR}/modules/linux/libfglrxdrm.so exeinto /usr/$(get_libdir)/xorg/modules doexe "${MY_BASE_DIR}"/usr/X11R6/${PKG_LIBDIR}/modules/{esut.a,glesx.so,amdxmm.so} # Arch-specific files. # (s)bin. into /opt if use acpi; then dosbin "${ARCH_DIR}"/usr/sbin/atieventsd fi # We cleaned out the compilable stuff in src_unpack dobin "${ARCH_DIR}"/usr/X11R6/bin/* # lib. exeinto /usr/$(get_libdir) # Everything except for the libGL.so installed in src_install-libs. doexe $(find "${ARCH_DIR}"/usr/X11R6/${PKG_LIBDIR} \ -maxdepth 1 -type f -name '*.so*' -not -name 'libGL.so*') insinto /usr/$(get_libdir) doins $(find "${ARCH_DIR}"/usr/X11R6/${PKG_LIBDIR} \ -maxdepth 1 -type f -not -name '*.so*') # Common files. # etc. insinto /etc/ati # Everything except for the authatieventsd.sh script. doins common/etc/ati/{logo*,control,atiogl.xml,signature,amdpcsdb.default} if use acpi; then insopts -m0755 doins common/etc/ati/authatieventsd.sh fi # include. insinto /usr doins -r common/usr/include insinto /usr/include/X11/extensions doins common/usr/X11R6/include/X11/extensions/fglrx_gamma.h # Just the atigetsysteminfo.sh script. into /usr dosbin common/usr/sbin/* # data files for the control panel. insinto /usr/share doins -r common/usr/share/ati insinto /usr/share/pixmaps doins common/usr/share/icons/ccc_{large,small}.xpm make_desktop_entry amdcccle 'ATI Catalyst Control Center' \ ccc_large System # doc. dohtml -r common/usr/share/doc/fglrx if use acpi; then doman common/usr/share/man/man8/atieventsd.8 pushd common/usr/share/doc/fglrx/examples/etc/acpi >/dev/null exeinto /etc/acpi doexe ati-powermode.sh insinto /etc/acpi/events doins events/* popd >/dev/null fi # Done with the "source" tree. Install tools we rebuilt: dobin extra/fgl_glxgears/fgl_glxgears newdoc extra/fgl_glxgears/README README.fgl_glxgears dolib extra/lib/fglrx_gamma/*so* newdoc extra/lib/fglrx_gamma/README README.libfglrx_gamma dobin extra/programs/fglrx_gamma/fglrx_xgamma doman extra/programs/fglrx_gamma/fglrx_xgamma.1 newdoc extra/programs/fglrx_gamma/README README.fglrx_gamma # Gentoo-specific stuff: if use acpi; then newinitd "${FILESDIR}"/atieventsd.init atieventsd \ || die "Failed to install atieventsd.init.d" echo 'ATIEVENTSDOPTS=""' > "${T}"/atieventsd.conf newconfd "${T}"/atieventsd.conf atieventsd fi } src_install-libs() { if [[ "${ABI}" == "amd64" ]]; then local EX_BASE_DIR="${BASE_DIR}_64a" local pkglibdir=lib64 local MY_ARCH_DIR="${S}/arch/x86_64" else local EX_BASE_DIR="${BASE_DIR}" local pkglibdir=lib local MY_ARCH_DIR="${S}/arch/x86" fi einfo "ati tree '${pkglibdir}' -> '$(get_libdir)' on system" local ATI_ROOT=/usr/$(get_libdir)/opengl/ati # To make sure we do not miss a spot when these change. local libmajor=1 libminor=2 local libver=${libmajor}.${libminor} # The GLX libraries # (yes, this really is "lib" even on amd64/multilib --marienz) exeinto ${ATI_ROOT}/lib doexe "${MY_ARCH_DIR}"/usr/X11R6/${pkglibdir}/libGL.so.${libver} dosym libGL.so.${libver} ${ATI_ROOT}/lib/libGL.so.${libmajor} dosym libGL.so.${libver} ${ATI_ROOT}/lib/libGL.so exeinto ${ATI_ROOT}/extensions doexe "${EX_BASE_DIR}"/usr/X11R6/${pkglibdir}/modules/extensions/* # DRI modules, installed into the path used by recent versions of mesa. exeinto /usr/$(get_libdir)/dri doexe "${MY_ARCH_DIR}"/usr/X11R6/${pkglibdir}/modules/dri/fglrx_dri.so # AMD Cal libraries exeinto /usr/$(get_libdir) doexe "${MY_ARCH_DIR}"/usr/${pkglibdir}/*.so # Make up a libGL.la. Ati does not provide one, but mesa does. If # a (libtool-based) libfoo is built with libGL.la present a # reference to it is put into libfoo.la, and compiling # (libtool-based) things that link too libfoo.la will complain if # libGL.la disappears. So if we do not make up a libGL.la # switching between mesa and ati becomes painful. local revision=$(printf '%d%02d%02d' $(get_version_components)) sed -e "s:\${libmajor}:${libmajor}:g" \ -e "s:\${libminor}:${libminor}:g" \ -e "s:\${libdir}:$(get_libdir):g" \ -e "s:\${revision}:${revision}:g" \ "${FILESDIR}"/libGL.la.in > "${D}"/${ATI_ROOT}/lib/libGL.la \ || die "sed failed to make libGL.la" local envname="${T}"/04ati-dri-path if [[ -n ${ABI} ]]; then envname="${envname}-${ABI}" fi echo "LIBGL_DRIVERS_PATH=/usr/$(get_libdir)/dri" > "${envname}" doenvd "${envname}" } pkg_postinst() { /usr/bin/eselect opengl set --use-old ati elog "To switch to ATI OpenGL, run \"eselect opengl set ati\"" elog "To change your xorg.conf you can use the bundled \"aticonfig\"" elog elog "If you experience unexplained segmentation faults and kernel crashes" elog "with this driver and multi-threaded applications such as wine," elog "set UseFastTLS in xorg.conf to either 0 or 1, but not 2." elog elog "You will have to source /etc/profile (or logout and back in) for dri" elog "to work, unless you previously had ati-drivers installed." # Workaroud screen corruption ewarn "If you experience screen corruption with this driver, try putting" ewarn ' Option "XAANoOffscreenPixmaps" "true"' ewarn "in the Device Section of /etc/X11/xorg.conf." linux-mod_pkg_postinst } pkg_prerm() { /usr/bin/eselect opengl set xorg-x11 }