Output from dmesg with mouse plugged into KVM

dmesg_2.6.30-gentoo-r1.txt (text/plain), 30.02 KB, created by Paul Moore on 2009-06-17 18:47:21 UTC

sig=se0 PE CONNECT
usb 1-2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: uevent
usb 1-2: usb_probe_device
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: uevent
hub 1-2:1.0: usb_probe_interface
hub 1-2:1.0: usb_probe_interface - got id
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub 1-2:1.0: standalone hub
hub 1-2:1.0: individual port power switching
hub 1-2:1.0: individual port over-current protection
hub 1-2:1.0: TT per port
hub 1-2:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-2:1.0: Port indicators are supported
hub 1-2:1.0: power on to power good time: 100ms
hub 1-2:1.0: local power source is good
hub 1-2:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '002'
hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 2-0:1.0: port 2 not reset yet, waiting 50ms
hub 1-2:1.0: port 3: status 0101 change 0001
hub 1-2:1.0: port 4: status 0101 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
usb 1-2: link qh256-0001/f6899100 start 255 [1/0 us]
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: ep0 maxpacket = 8
usb 5-2: default language 0x0409
usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: Fingerprint Sensor
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio2/input/input6
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
hub 1-2:1.0: state 7 ports 4 chg 0018 evt 0000
hub 1-2:1.0: port 3, status 0101, change 0000, 12 Mb/s
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 360k freed
usb 1-2.3: new high speed USB device using ehci_hcd and address 3
usb 1-2.3: default language 0x0409
usb 1-2.3: New USB device found, idVendor=1058, idProduct=0901
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3: Product: External HDD
usb 1-2.3: Manufacturer: Western Digital
usb 1-2.3: SerialNumber: 57442D5743414E4B35303733333236
usb 1-2.3: uevent
usb 1-2.3: usb_probe_device
usb 1-2.3: configuration #1 chosen from 1 choice
usb 1-2.3: adding 1-2.3:1.0 (config #1, interface 0)
usb 1-2.3:1.0: uevent
usb-storage 1-2.3:1.0: usb_probe_interface
usb-storage 1-2.3:1.0: usb_probe_interface - got id
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
drivers/usb/core/inode.c: creating file '003'
hub 1-2:1.0: port 4, status 0101, change 0000, 12 Mb/s
usb 1-2.4: new full speed USB device using ehci_hcd and address 4
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f992941320e]
usb usb4: suspend_rh (auto-stop)
usb usb6: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
usb 1-2.4: ep0 maxpacket = 8
usb 1-2.4: New USB device found, idVendor=0557, idProduct=7000
usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.4: uevent
usb 1-2.4: usb_probe_device
usb 1-2.4: configuration #1 chosen from 1 choice
usb 1-2.4: adding 1-2.4:1.0 (config #1, interface 0)
usb 1-2.4:1.0: uevent
hub 1-2.4:1.0: usb_probe_interface
hub 1-2.4:1.0: usb_probe_interface - got id
hub 1-2.4:1.0: USB hub found
hub 1-2.4:1.0: 4 ports detected
hub 1-2.4:1.0: standalone hub
hub 1-2.4:1.0: individual port power switching
hub 1-2.4:1.0: individual port over-current protection
hub 1-2.4:1.0: power on to power good time: 100ms
hub 1-2.4:1.0: local power source is good
hub 1-2.4:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '004'
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0010
hub 1-2.4:1.0: port 1: status 0301 change 0001
usb 1-2.4: link qh128-0601/f6899280 start 127 [1/2 us]
hub 1-2.4:1.0: state 7 ports 4 chg 0002 evt 0000
hub 1-2.4:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
usb 1-2.4.1: new low speed USB device using ehci_hcd and address 5
usb 1-2.4.1: skipped 1 descriptor after interface
usb 1-2.4.1: skipped 1 descriptor after interface
usb 1-2.4.1: default language 0x0409
usb 1-2.4.1: New USB device found, idVendor=0d3d, idProduct=0001
usb 1-2.4.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.4.1: Product: USBPS2
usb 1-2.4.1: uevent
usb 1-2.4.1: usb_probe_device
usb 1-2.4.1: configuration #1 chosen from 1 choice
usb 1-2.4.1: adding 1-2.4.1:1.0 (config #1, interface 0)
usb 1-2.4.1:1.0: uevent
usbhid 1-2.4.1:1.0: usb_probe_interface
usbhid 1-2.4.1:1.0: usb_probe_interface - got id
input: USBPS2 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.0/input/input7
usb 1-2.4.1: link qh8-3008/f6899380 start 7 [1/2 us]
generic-usb 0003:0D3D:0001.0001: input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1a.7-2.4.1/input0
usb 1-2.4.1: adding 1-2.4.1:1.1 (config #1, interface 1)
usb 1-2.4.1:1.1: uevent
usbhid 1-2.4.1:1.1: usb_probe_interface
usbhid 1-2.4.1:1.1: usb_probe_interface - got id
input: USBPS2 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.1/input/input8
usb 1-2.4.1: link qh8-0601/f6899400 start 6 [1/2 us]
generic-usb 0003:0D3D:0001.0002: input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1a.7-2.4.1/input1
drivers/usb/core/inode.c: creating file '005'
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0002
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
usb usb6: suspend_rh
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
usb usb7: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
udev: starting version 141
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-2: uevent
usb 1-2.3: uevent
usb 1-2.3:1.0: uevent
usb 1-2.4: uevent
usb 1-2.4.1: uevent
usb 1-2.4.1:1.0: uevent
usb 1-2.4.1:1.1: uevent
usb 1-2.4:1.0: uevent
usb 1-2:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb 5-2: uevent
usb 5-2:1.0: uevent
usb usb6: uevent
usb 6-0:1.0: uevent
usb usb7: uevent
usb 7-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c1]
usb usb3: uevent
usb usb4: uevent
usb usb1: uevent
usb usb5: uevent
usb usb6: uevent
usb usb7: uevent
usb usb2: uevent
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x04b8, PCI irq 18
yenta_cardbus 0000:02:06.0: Socket status: 30000006
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean.
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xd8100000 - 0xd83fffff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30c1]
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
usb 1-2: uevent
usb 5-2: uevent
yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 19
yenta_cardbus 0000:02:06.1: Socket status: 30000810
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x6000-0x6fff: clean.
yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xd8100000 - 0xd83fffff
yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
usb 1-2.3: uevent
usb 1-2.4: uevent
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: setting latency timer to 64
iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
scsi 3:0:0:0: Direct-Access     WD       2500JB External  0107 PQ: 0 ANSI: 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
usb-storage: device scan complete
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-2.4.1: uevent
phy0: Selected rate control algorithm 'iwl-agn-rs'
usb 1-2.4.1:1.0: uevent
usb 1-2.4.1:1.1: uevent
usb 1-2.4.1: uevent
usb 1-2.4.1: uevent
usb 1-2.4.1:1.1: uevent
usb 1-2.4.1: uevent
usb 1-2.3:1.0: uevent
usb 1-2.3: uevent
pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
pcmcia_socket pcmcia_socket1: cs: memory probe 0xd8100000-0xd83fffff: excluding 0xd8100000-0xd812ffff
pcmcia 1.0: pcmcia: registering new device pcmcia1.0
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
EXT3 FS on sda2, internal journal
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
Adding 2104504k swap on /dev/sda3.  Priority:-1 extents:1 across:2104504k 
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-2: uevent
usb 1-2.3: uevent
usb 1-2.3:1.0: uevent
usb 1-2.4: uevent
usb 1-2.4.1: uevent
usb 1-2.4.1:1.0: uevent
usb 1-2.4.1:1.1: uevent
usb 1-2.4:1.0: uevent
usb 1-2:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb 5-2: uevent
usb 5-2:1.0: uevent
usb usb6: uevent
usb 6-0:1.0: uevent
usb usb7: uevent
usb 7-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:10:00.0: loaded firmware version 228.57.2.23
iwlagn 0000:10:00.0: Radio disabled by HW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
platform microcode: firmware: requesting intel-ucode/06-0f-0a
platform microcode: firmware: requesting intel-ucode/06-0f-0a
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
microcode: CPU0 updated from revision 0x92 to 0x94, date = 2007-09-24 
microcode: CPU1 updated from revision 0x92 to 0x94, date = 2007-09-24 
Microcode Update Driver: v2.00 removed.
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
usb usb4: usb auto-resume
usb usb4: wakeup_rh
hub 4-0:1.0: hub_resume
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb2: usb auto-resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 2-0:1.0: hub_resume
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
usb usb7: usb auto-resume
usb usb7: wakeup_rh
hub 7-0:1.0: hub_resume
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb6: usb auto-resume
usb usb6: wakeup_rh
hub 6-0:1.0: hub_resume
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb3: usb auto-resume
usb usb3: wakeup_rh
hub 3-0:1.0: hub_resume
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb4: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
usb usb6: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
usb usb7: suspend_rh
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
usb usb6: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
hub 1-2.4:1.0: port 4, status 0101, change 0001, 12 Mb/s
hub 1-2.4:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
usb 1-2.4.4: new full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: skipped 1 descriptor after interface
usb 1-2.4.4: skipped 1 descriptor after interface
usb 1-2.4.4: default language 0x0409
usb 1-2.4.4: New USB device found, idVendor=046d, idProduct=c526
usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4.4: Product: USB Receiver
usb 1-2.4.4: Manufacturer: Logitech
usb 1-2.4.4: uevent
usb 1-2.4.4: usb_probe_device
usb 1-2.4.4: configuration #1 chosen from 1 choice
usb 1-2.4.4: adding 1-2.4.4:1.0 (config #1, interface 0)
usb 1-2.4.4:1.0: uevent
usbhid 1-2.4.4:1.0: usb_probe_interface
usbhid 1-2.4.4:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.4/1-2.4.4:1.0/input/input10
generic-usb 0003:046D:C526.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-2.4.4/input0
usb 1-2.4.4: adding 1-2.4.4:1.1 (config #1, interface 1)
usb 1-2.4.4:1.1: uevent
usbhid 1-2.4.4:1.1: usb_probe_interface
usbhid 1-2.4.4:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.4/1-2.4.4:1.1/input/input11
drivers/usb/core/file.c: looking for a minor, starting at 96
generic-usb 0003:046D:C526.0004: input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-2.4.4/input1
drivers/usb/core/inode.c: creating file '006'
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: uevent
usb 1-2.4.4:1.1: uevent
usb 1-2.4.4: uevent
usb 1-2.4.4:1.0: uevent
usb 1-2.4.4: uevent
usb 1-2.4.4:1.0: uevent
usb 1-2.4.4: uevent
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32
hub 1-2.4:1.0: state 7 ports 4 chg 0000 evt 0010
usb 1-2.4.4: reset full speed USB device using ehci_hcd and address 6
hub 1-2.4:1.0: port 4 not reset yet, waiting 10ms
usb 1-2.4.4: ep0 maxpacket = 32