output of dmesg

dmesg.txt (text/plain), 31.27 KB, created by Lubos Kolouch on 2009-06-11 20:28:12 UTC

Linux version 2.6.30-gentoo-r1-kolcon (root@nbgentoo) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #2 SMP PREEMPT Thu Jun 11 22:19:04 CEST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005f681400 (usable)
 BIOS-e820: 000000005f681400 - 0000000060000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
 BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x5f681 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 040000000 mask FE0000000 write-back
  2 base 05F800000 mask FFF800000 uncachable
  3 base 05F700000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 000000000009f000 (usable)
 modified: 000000000009f000 - 00000000000a0000 (reserved)
 modified: 0000000000100000 - 000000005f681400 (usable)
 modified: 000000005f681400 - 0000000060000000 (reserved)
 modified: 00000000f0000000 - 00000000f4007000 (reserved)
 modified: 00000000f4008000 - 00000000f400c000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed20000 - 00000000feda0000 (reserved)
 modified: 00000000fee00000 - 00000000fee10000 (reserved)
 modified: 00000000ffb00000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
ACPI: RSDP 000fc0e0 00014 (v00 DELL  )
ACPI: RSDT 5f681a0e 00044 (v01 DELL    M07     27D80202 ASL  00000061)
ACPI: FACP 5f682800 00074 (v01 DELL    M07     27D80202 ASL  00000061)
ACPI: DSDT 5f683400 04D15 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 5f691c00 00040
ACPI: HPET 5f682f00 00038 (v01 DELL    M07     00000001 ASL  00000061)
ACPI: APIC 5f683000 00068 (v01 DELL    M07     27D80202 ASL  00000047)
ACPI: ASF! 5f682c00 0005B (v16 DELL    M07     27D80202 ASL  00000061)
ACPI: MCFG 5f682fc0 0003E (v16 DELL    M07     27D80202 ASL  00000061)
ACPI: TCPA 5f683300 00032 (v01 DELL    M07     27D80202 ASL  00000061)
ACPI: SLIC 5f68309c 00176 (v01 DELL    M07     27D80202 ASL  00000061)
ACPI: SSDT 5f681a95 004DC (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
638MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000071be0c]    TEXT DATA BSS ==> [0000100000 - 000071be0c]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [000071c000 - 000071f180]              BRK ==> [000071c000 - 000071f180]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0005f681
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x0005f681
On node 0 totalpages: 390684
free_area_init_node: node 0, pgdat c05abd00, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3963 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 1278 pages used for memmap
  HighMem zone: 162181 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 70000000 (gap: 60000000:90000000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages at c1bf7000, static data 24708 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387630
Kernel command line: root=/dev/hda2 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1197.225 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0005f681)
Memory: 1542396k/1563140k available (3686k kernel code, 19448k reserved, 1207k data, 356k init, 653836k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc05ce000 - 0xc0627000   ( 356 kB)
      .data : 0xc0499b11 - 0xc05c79c8   (1207 kB)
      .text : 0xc0100000 - 0xc0499b11   (3686 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.45 BogoMIPS (lpj=1197225)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU           U2500  @ 1.20GHz stepping 08
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2394.50 BogoMIPS (lpj=1197252)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Genuine Intel(R) CPU           U2500  @ 1.20GHz stepping 08
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 2337155145 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (4788.95 BogoMIPS).
net_namespace: 560 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (tbutils-0246): Incorrect checksum in table [TCPA] - 00, should be AB [20090320]
ACPI: SSDT 5f681a52 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff]
pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xefd00000-0xefdfffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xefcf0000-0xefcfffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.2: bridge 32bit mmio: [0xefc00000-0xefcfffff]
pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10 32bit mmio: [0xefbff800-0xefbfffff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:02:01.2: reg 10 32bit mmio: [0xefbff700-0xefbff7ff]
pci 0000:02:01.2: supports D1 D2
pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xefb00000-0xefbfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *3
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x5f6813ff could not be reserved
system 00:00: iomem range 0x5f681400-0x5f6fffff has been reserved
system 00:00: iomem range 0x5f700000-0x5f7fffff has been reserved
system 00:00: iomem range 0x5f700000-0x5fefffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:00: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:00: iomem range 0xfed45000-0xfed9ffff has been reserved
system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved
system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved
system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved
system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved
system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved
system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x1080-0x10bf has been reserved
system 00:03: ioport range 0x10c0-0x10df has been reserved
system 00:03: ioport range 0x809-0x809 has been reserved
system 00:08: ioport range 0xc80-0xcaf has been reserved
system 00:08: ioport range 0xcc0-0xcff could not be reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0x920-0x92f has been reserved
system 00:08: ioport range 0xcbc-0xcbf has been reserved
system 00:08: ioport range 0x930-0x97f has been reserved
system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0c: ioport range 0xcb0-0xcbb has been reserved
system 00:0c: iomem range 0xfed40000-0xfed44fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xefd00000-0xefdfffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.2:   IO window: disabled
pci 0000:00:1c.2:   MEM window: 0xefc00000-0xefcfffff
pci 0000:00:1c.2:   PREFETCH window: disabled
pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:01.0:   IO window: 0x002000-0x0020ff
pci 0000:02:01.0:   IO window: 0x002400-0x0024ff
pci 0000:02:01.0:   PREFETCH window: 0x70000000-0x73ffffff
pci 0000:02:01.0:   MEM window: 0x74000000-0x77ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
pci 0000:00:1e.0:   MEM window: 0xefb00000-0xefbfffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000070000000-0x00000073ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:0c: resource 1 mem: [0xefd00000-0xefdfffff]
pci_bus 0000:09: resource 1 mem: [0xefc00000-0xefcfffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xefb00000-0xefbfffff]
pci_bus 0000:02: resource 2 pref mem [0x70000000-0x73ffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io:  [0x2000-0x20ff]
pci_bus 0000:03: resource 1 io:  [0x2400-0x24ff]
pci_bus 0000:03: resource 2 pref mem [0x70000000-0x73ffffff]
pci_bus 0000:03: resource 3 mem: [0x74000000-0x77ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
Scanning for low memory corruption every 60 seconds
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.11)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Btrfs loaded
msgmni has been set to 1737
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([e-mail])
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /class/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /class/input/input2
ACPI: Sleep Button [SBTN]
ACPI: SSDT 5f6821bc 001C0 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 5f681f71 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 5f68237c 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 5f682137 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (59 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7
Probing IDE interface ide0...
Clocksource tsc unstable (delta = 1952179662 ns)
hda: TOSHIBA MK8009GAH, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB), CHS=16383/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 >
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Using IPI No-Shortcut mode
registered taskstats version 1
input: AT Translated Set 2 keyboard as /class/input/input3
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
VFS: Mounted root (xfs filesystem) readonly on device 3:2.
Freeing unused kernel memory: 356k freed
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ACPI: WMI: Mapper loaded
input: Video Bus as /class/input/input4
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI Warning (nspredef-0437): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20090320]
input: Video Bus as /class/input/input5
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
intel_rng: FWH not detected
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
tg3.c:v3.98 (February 25, 2009)
tg3 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:09:00.0: setting latency timer to 64
tg3 0000:09:00.0: wake-up capability disabled by ACPI
tg3 0000:09:00.0: PME# disabled
eth0: Tigon3 [partno(BCM5752KFBG) rev 6002] (PCI Express) MAC address 00:15:c5:47:48:43
eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01d6]
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:02:01.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xefb00000 - 0xefbfffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x73ffffff
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 18)
sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[efbff800-efbfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 1-2: new high speed USB device using ehci_hcd and address 2
iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 27 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
input: HDA Intel Mic at Ext Left Jack as /class/input/input8
input: HDA Intel HP Out at Ext Left Jack as /class/input/input9
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.3: new full speed USB device using ehci_hcd and address 3
usb 1-2.3: configuration #1 chosen from 1 choice
hub 1-2.3:1.0: USB hub found
hub 1-2.3:1.0: 3 ports detected
usb 1-2.3.2: new full speed USB device using ehci_hcd and address 4
usb 1-2.3.2: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[374fc0002af0b850]
allocated 1280x800 fb: 0x007df000, bo f6ac7600
Console: switching to colour frame buffer device 128x48
[drm] TV-15: set mode 1024x768 1a
[drm] LVDS-8: set mode 1280x800 17
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
intelfb: Version 0.9.6
hda: UDMA/100 mode selected
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
Adding 987988k swap on /dev/hda3.  Priority:-1 extents:1 across:987988k 
iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
hda: cache flushes supported
tg3 0000:09:00.0: wake-up capability disabled by ACPI
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 28 for MSI/MSI-X
tg3 0000:09:00.0: PME# enabled
tg3 0000:09:00.0: wake-up capability enabled by ACPI
tg3 0000:09:00.0: wake-up capability disabled by ACPI
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 28 for MSI/MSI-X
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
wlan0: authenticate with AP 00:16:b6:c1:57:a4
wlan0: authenticate with AP 00:16:b6:c1:57:a4
wlan0: authenticated
wlan0: associate with AP 00:16:b6:c1:57:a4
wlan0: RX AssocResp from 00:16:b6:c1:57:a4 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: direct probe to AP 00:16:b6:c1:57:a4 try 1
wlan0: direct probe to AP 00:16:b6:c1:57:a4 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:16:b6:c1:57:a4
wlan0: authenticated
wlan0: associate with AP 00:16:b6:c1:57:a4
wlan0: RX ReassocResp from 00:16:b6:c1:57:a4 (capab=0x411 status=0 aid=1)
wlan0: associated