result of dmesg function

dmesg (text/plain), 35.24 KB, created by Miroslaw Mieszczak on 2009-06-08 05:08:59 UTC

Linux version 2.6.29-hh3 (root@laptop-mirka) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #2 SMP Sat Jun 6 16:17:47 CEST 2009
Command line: root=/dev/ram0 real_root=/dev/mapper/via_bfcjedcidp3 init=/linuxrc dodmraid splash=silent,theme:mirek CONSOLE=/dev/tty1 video=uvesafb:1400x1050-16,mtrr:4,ywrap noexec=on noexec32=on,all pcie_aspm=force fastboot
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
 BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000c2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff00000 (usable)
 BIOS-e820: 000000007ff00000 - 000000007ff13000 (ACPI data)
 BIOS-e820: 000000007ff13000 - 000000007ff80000 (ACPI NVS)
 BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x7ff00 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000007ff00000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007ff00000 page 4k
kernel direct mapping tables up to 7ff00000 @ 8000-c000
last_map_addr: 7ff00000 end: 7ff00000
RAMDISK: 37974000 - 37fefca8
ACPI: RSDP 000F7220, 0014 (r0 PTLTD )
ACPI: RSDT 7FF0E628, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP 7FF12D1C, 0074 (r1 CLEVO  PTLTW     6040000 PTL_    F4240)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FF0E65C, 46C0 (r1  CLEVO PTL_ACPI  6040000 MSFT  100000E)
ACPI: FACS 7FF13FC0, 0040
ACPI: SSDT 7FF12D90, 01CA (r1 PTLTD  POWERNOW  6040000  LTP        1)
ACPI: APIC 7FF12F5A, 006A (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: MCFG 7FF12FC4, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007ff00000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00009fe478]    TEXT DATA BSS ==> [0000200000 - 00009fe478]
  #3 [0037974000 - 0037fefca8]          RAMDISK ==> [0037974000 - 0037fefca8]
  #4 [000009b000 - 0000100000]    BIOS reserved ==> [000009b000 - 0000100000]
  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009b
    0: 0x00000100 -> 0x0007ff00
On node 0 totalpages: 523931
  DMA zone: 56 pages used for memmap
  DMA zone: 2152 pages reserved
  DMA zone: 1787 pages, LIFO batch:0
  DMA32 zone: 7109 pages used for memmap
  DMA32 zone: 512827 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 0, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ10 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000c2000
PM: Registered nosave memory: 00000000000c2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 53248 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 514614
Kernel command line: root=/dev/ram0 real_root=/dev/mapper/via_bfcjedcidp3 init=/linuxrc dodmraid splash=silent,theme:mirek CONSOLE=/dev/tty1 video=uvesafb:1400x1050-16,mtrr:4,ywrap noexec=on noexec32=on,all pcie_aspm=force fastboot
PCIe ASPM is forcedly enabled
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2200.389 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ b0000000 old size 32 MB
Aperture from AGP @ b0000000 size 256 MB (APSIZE f00)
Node 0: aperture @ b0000000 size 256 MB
Memory: 2048192k/2096128k available (3387k kernel code, 404k absent, 46900k reserved, 2684k data, 440k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4402.14 BogoMIPS (lpj=7334630)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 007ff80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4401.21 BogoMIPS (lpj=7333142)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Brought up 2 CPUs
Total of 2 processors activated (8804.35 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 1 0
net_namespace: 1776 bytes
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, ffb7ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [80000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 3
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e03fffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xb0000000-0xbfffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0x90020000-0x90020fff]
pci 0000:00:05.0: supports D1 D2
pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 10 32bit mmio: [0xd2206000-0xd22067ff]
pci 0000:00:06.0: reg 14 32bit mmio: [0xd2200000-0xd2203fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:06.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0x1000-0x10ff]
pci 0000:00:08.0: reg 14 32bit mmio: [0xd2206800-0xd22068ff]
pci 0000:00:08.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0a.0: reg 10 32bit mmio: [0xd2204000-0xd2205fff]
pci 0000:00:0f.0: reg 10 io port: [0x20b0-0x20b7]
pci 0000:00:0f.0: reg 14 io port: [0x20a4-0x20a7]
pci 0000:00:0f.0: reg 18 io port: [0x20a8-0x20af]
pci 0000:00:0f.0: reg 1c io port: [0x20a0-0x20a3]
pci 0000:00:0f.0: reg 20 io port: [0x2080-0x208f]
pci 0000:00:0f.0: reg 24 io port: [0x1400-0x14ff]
pci 0000:00:0f.1: reg 20 io port: [0x2090-0x209f]
pci 0000:00:10.0: reg 20 io port: [0x2000-0x201f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0x2020-0x203f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0x2040-0x205f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0x2060-0x207f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xd2206c00-0xd2206cff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0x1800-0x18ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:11.6: reg 10 io port: [0x1c00-0x1cff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
pci 0000:02:00.0: reg 24 io port: [0x5000-0x507f]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0x5000-0x5fff]
pci 0000:00:02.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:02.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2C._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 0: can't allocate resource
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0238]
agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: mem resource (0xdc000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:05: iomem range 0xe0000000-0xe0008fff has been reserved
system 00:05: iomem range 0xe0010000-0xe009ffff has been reserved
system 00:05: iomem range 0xe0200000-0xe0201fff has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x4100-0x411f has been reserved
system 00:06: ioport range 0x3f0-0x3f7 could not be reserved
system 00:06: ioport range 0x700-0x70f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: disabled
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
pci 0000:00:02.0:   IO window: 0x5000-0x5fff
pci 0000:00:02.0:   MEM window: 0xd0000000-0xd1ffffff
pci 0000:00:02.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
pci 0000:00:03.0:   IO window: disabled
pci 0000:00:03.0:   MEM window: disabled
pci 0000:00:03.0:   PREFETCH window: disabled
pci 0000:00:03.2: PCI bridge, secondary bus 0000:04
pci 0000:00:03.2:   IO window: disabled
pci 0000:00:03.2:   MEM window: disabled
pci 0000:00:03.2:   PREFETCH window: disabled
pci 0000:00:05.0: CardBus bridge, secondary bus 0000:05
pci 0000:00:05.0:   IO window: 0x002400-0x0024ff
pci 0000:00:05.0:   IO window: 0x002800-0x0028ff
pci 0000:00:05.0:   PREFETCH window: 0x88000000-0x8bffffff
pci 0000:00:05.0:   MEM window: 0x8c000000-0x8fffffff
pci 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 27 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 31 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT C -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.2: setting latency timer to 64
  alloc irq_desc for 18 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd1ffffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0x0-0x0]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
pci_bus 0000:05: resource 0 io:  [0x2400-0x24ff]
pci_bus 0000:05: resource 1 io:  [0x2800-0x28ff]
pci_bus 0000:05: resource 2 mem: [0x88000000-0x8bffffff]
pci_bus 0000:05: resource 3 mem: [0x8c000000-0x8fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6639k freed
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4014
alg: No test for stdrng (krng)
alg: No test for stdrng (ansi_cprng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 48 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:02.0: irq 48 for MSI/MSI-X
pcieport-driver 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 49 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport-driver 0000:00:03.2: setting latency timer to 64
  alloc irq_desc for 50 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:03.2: irq 50 for MSI/MSI-X
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:03.2:pcie01: AER service couldn't init device: no _OSC support
Linux agpgart interface v0.103
uvesafb: NVIDIA Corporation, G70 Board - e346h1  , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz
uvesafb: scrolling: redraw
Console: switching to colour frame buffer device 175x65
Clocksource tsc unstable (delta = -273207576 ns)
fbcondecor: console 0 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 0
uvesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000500000, using 10240k, total 262144k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SLPB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (45 C)
brd: module loaded
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_via 0000:00:0f.0: version 2.4
  alloc irq_desc for 20 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0x20b0 ctl 0x20a4 bmdma 0x2080 irq 20
ata2: SATA max UDMA/133 cmd 0x20a8 ctl 0x20a0 bmdma 0x2088 irq 20
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HTS721010G9SA00, MCZOC10V, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZO PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: HTS721010G9SA00, MCZOC10V, max UDMA/100
ata2.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZO PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2009-06-08 06:56:36 UTC (1244444196)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 440k freed
Write protecting the kernel read-only data: 4732k
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 1
udev: starting version 141
NET: Registered protocol family 23
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
pata_via 0000:00:0f.1: version 0.3.3
pata_via 0000:00:0f.1: power state changed by ACPI to D0
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2090 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2098 irq 15
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
nsc-ircc 00:0b: activated
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
irda0 (): not using net_device_ops yet
IrDA: Registered device irda0
nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/device:19/input/input5
yenta_cardbus 0000:00:05.0: CardBus bridge found [1558:0901]
yenta_cardbus 0000:00:05.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:00:05.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:00:05.0: TI: mfunc 0x00001002, devctl 0x64
ACPI: Video Device [NVD] (multi-head: yes  rom: no  post: no)
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ata4.00: ATAPI: _NEC DVD+/-RW ND-6650A, 103C, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 103C PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
ppdev: user-space parallel port driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
yenta_cardbus 0000:00:05.0: ISA IRQ mask 0x0a70, PCI irq 18
yenta_cardbus 0000:00:05.0: Socket status: 30000006
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  alloc irq_desc for 19 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
r8169 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:00:08.0: PCI: Disallowing DAC for device
r8169 0000:00:08.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xffffc200004c8800, 00:90:f5:4c:9c:30, XID 10000000 IRQ 19
ohci1394 0000:00:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[d2206000-d22067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
  alloc irq_desc for 21 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xd2206c00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x00002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
  alloc irq_desc for 22 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
MC'97 1 converters and GPIO not ready (0xff00)
  alloc irq_desc for 17 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
rt2500pci 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wmaster0 (rt2500pci): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (rt2500pci): not using net_device_ops yet
uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x00002020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x00002060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090f500004c9c30]
  alloc irq_desc for 24 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.60  Mon May 11 15:27:42 PDT 2009
usbcore: registered new interface driver libusual
usb 3-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 3-1: configuration #1 chosen from 1 choice
input: PATEN USB HID Device         as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input6
generic-usb 0003:1020:030A.0001: input: USB HID v1.10 Mouse [PATEN USB HID Device        ] on usb-0000:00:10.1-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
lp0: using parport0 (interrupt-driven).
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0b44c20
vboxdrv: fAsync=1 offMin=0x4fc offMax=0x4fc
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0ce39c0
vboxnet0 (): not using net_device_ops yet
fbcondecor: console 0 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 0
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access     GENERIC  USB Storage-CFC  019A PQ: 0 ANSI: 0 CCS
scsi 4:0:0:1: Direct-Access     GENERIC  USB Storage-SDC  019A PQ: 0 ANSI: 0 CCS
scsi 4:0:0:2: Direct-Access     GENERIC  USB Storage-SMC  019A PQ: 0 ANSI: 0 CCS
scsi 4:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  019A PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg4 type 0
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg5 type 0
sd 4:0:0:3: Attached scsi generic sg6 type 0
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdf] Attached SCSI removable disk
EXT3 FS on dm-3, internal journal
Loading Reiser4. See www.namesys.com for a description of Reiser4.
reiser4: dm-21: found disk format 4.0.0.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
reiser4: dm-15: found disk format 4.0.0.
reiser4: dm-14: found disk format 4.0.0.
reiser4: dm-13: found disk format 4.0.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on dm-17, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
Filesystem "dm-16": Disabling barriers, trial barrier write failed
XFS mounting filesystem dm-16
Ending clean XFS mount for filesystem: dm-16
Adding 1951856k swap on /dev/mapper/via_bfcjedcid9.  Priority:1 extents:1 across:1951856k 
fuse init (API version 7.11)
fbcondecor: console 1 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'mirek'
fbcondecor: switched decor state to 'on' on console 5
nsc-ircc, unable to allocate dma=-1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
IRQ 24/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
r8169: eth0: link up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
vbox0: no IPv6 routers present
cfg80211: Calling CRDA for country: PL
vbox1: no IPv6 routers present
cfg80211: Regulatory domain changed to country: PL
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
	(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
	(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
	(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
eth0: no IPv6 routers present
v86d[560]: segfault at 0 ip 00000000004008b9 sp 00007fff6d543280 error 4 in v86d (deleted)[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[5742]: segfault at 0 ip 00000000004008b9 sp 00007ffff3e52480 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[5745]: segfault at 0 ip 00000000004008b9 sp 00007fff7928ffd0 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[5748]: segfault at 0 ip 00000000004008b9 sp 00007fff27272fb0 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
v86d: Trying to access an unsupported memory region at cffff
v86d[6479]: segfault at 0 ip 00000000004008b9 sp 00007fffb687f800 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[6482]: segfault at 0 ip 00000000004008b9 sp 00007fffcd75d490 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
fbcondecor: console 0 using theme 'mirek'
v86d: Trying to access an unsupported memory region at cffff
v86d[6487]: segfault at 0 ip 00000000004008b9 sp 00007fffc28cd610 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[6725]: segfault at 0 ip 00000000004008b9 sp 00007ffff369b3d0 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
fbcondecor: switched decor state to 'on' on console 0
v86d: Trying to access an unsupported memory region at cffff
v86d[7471]: segfault at 0 ip 00000000004008b9 sp 00007fff88737470 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1). Trying again with default timings.
v86d: Trying to access an unsupported memory region at cffff
v86d[7474]: segfault at 0 ip 00000000004008b9 sp 00007fffcadf7b30 error 4 in v86d[400000+1b000]
uvesafb: mode switch failed (eax=0x4f02, err=1)
reiser4[amarokapp(7833)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
NOTICE: dm-21 does not support write barriers, using synchronous write instead.