dmesg from successful boot with ACPI of 2.6.28-r7

dmesg.txt (text/plain), 31.33 KB, created by Christopher Head on 2009-06-07 17:52:34 UTC

BIOS EBDA/lowmem at: 0009fc00/0009fc00
Linux version 2.6.28-hardened-r7 (root@dijkstra) (gcc version 4.4.0 (Gentoo 4.4.0 p1.0) ) #1 Fri Jun 5 16:39:44 PDT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
 BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
 BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ef50000 (usable)
 BIOS-e820: 000000001ef50000 - 000000001ef60000 (ACPI data)
 BIOS-e820: 000000001ef60000 - 000000001f000000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x1ef50 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1ef50000 @ 7000-d000
ACPI: RSDP 000F01E0, 0014 (r0 TOSHIB)
ACPI: RSDT 1EF50000, 0038 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: FACP 1EF50060, 0084 (r2 TOSHIB 750      20030101 TASM  4010000)
ACPI: DSDT 1EF50118, 4619 (r1 TOSHIB A0025    20041222 MSFT  100000E)
ACPI: FACS 000EEE00, 0040
ACPI: SSDT 1EF54731, 0231 (r1 TOSHIB A0025    20040908 MSFT  100000E)
ACPI: DBGP 1EF500E4, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: BOOT 1EF50038, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: SSDT 1EF54962, 1052 (r1 TOSHIB A0025    20041222 MSFT  100000E)
495MB LOWMEM available.
  mapped low ram: 0 - 1ef50000
  low ram: 00000000 - 1ef50000
  bootmap 00001000 - 00004dec
(6 early reservations) ==> bootmem [0000000000 - 001ef50000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000200000 - 0000bbfb50]    TEXT DATA BSS ==> [0000200000 - 0000bbfb50]
  #2 [0000bc0000 - 0000bc4000]    INIT_PG_TABLE ==> [0000bc0000 - 0000bc4000]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #5 [0000001000 - 0000005000]          BOOTMAP ==> [0000001000 - 0000005000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001ef50
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001ef50
On node 0 totalpages: 126703
free_area_init_node: node 0, pgdat c0b7c518, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 959 pages used for memmap
  Normal zone: 121745 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0xd808
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc10000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125712
Kernel command line: root=/dev/sda2 panic=60 quiet lapic reboot=acpi ipw2200.associate=0 ipw2200.antenna=2 ipw2200.hwcrypto=1 hpet=force
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 1695.718 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 492240k/507200k available (2389k kernel code, 14396k reserved, 202k data, 6140k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffeb000 - 0xfffff000   (  80 kB)
    vmalloc : 0xdf750000 - 0xfffe9000   ( 520 MB)
    lowmem  : 0xc0000000 - 0xdef50000   ( 495 MB)
      .init : 0xc0201000 - 0xc0800000   (6140 kB)
      .data : 0xc0b53000 - 0xc0b85888   ( 202 kB)
      .text : 0xc0800000 - 0xc0a55511   (2389 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.43 BogoMIPS (lpj=6782872)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080926
ACPI: setting ELCR to 0200 (from 0e00)
net_namespace: 500 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
bios32_service: base:000f0000 length:00010000 entry:0000d56a
PCI: PCI BIOS revision 2.10 entry at 0xd56a, last bus=3
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0501): Package List length (10) larger than NumElements count (6), truncated
 [20080926]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using PIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
pci 0000:00:02.0: reg 18 io port: [0xeff8-0xefff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x7ffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff]
pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f]
pci 0000:00:1d.2: reg 20 io port: [0xcf60-0xcf7f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0xaff8-0xafff]
pci 0000:00:1f.1: reg 14 io port: [0xaff4-0xaff7]
pci 0000:00:1f.1: reg 18 io port: [0xafe8-0xafef]
pci 0000:00:1f.1: reg 1c io port: [0xafe4-0xafe7]
pci 0000:00:1f.1: reg 20 io port: [0xafa0-0xafaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.5: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.5: reg 14 io port: [0x00-0x3f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.6: reg 14 io port: [0x00-0x7f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:01:05.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
pci 0000:01:05.0: PME# supported from D0 D3hot D3cold
pci 0000:01:05.0: PME# disabled
pci 0000:01:08.0: reg 10 32bit mmio: [0xcfffe000-0xcfffefff]
pci 0000:01:08.0: reg 14 io port: [0xbf40-0xbf7f]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:01:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:01:0b.0: supports D1 D2
pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0b.0: PME# disabled
pci 0000:01:0b.2: reg 10 32bit mmio: [0x000000-0x0007ff]
pci 0000:01:0b.2: reg 14 32bit mmio: [0x000000-0x003fff]
pci 0000:01:0b.2: supports D1 D2
pci 0000:01:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0b.2: PME# disabled
pci 0000:01:0b.4: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:01:0b.4: reg 14 32bit mmio: [0x000000-0x0000ff]
pci 0000:01:0b.4: reg 18 32bit mmio: [0x000000-0x0000ff]
pci 0000:01:0b.4: supports D1 D2
pci 0000:01:0b.4: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0b.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:02.1 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xe0000-0xeffff) overlaps 0000:00:02.1 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:02.1 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x100000-0x1ef4ffff) overlaps 0000:00:02.1 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x1ef50000-0x1ef5ffff could not be reserved
system 00:00: iomem range 0x1ef60000-0x1effffff has been reserved
system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:00: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:00: iomem range 0xfff00000-0xffffffff has been reserved
system 00:08: ioport range 0x1e0-0x1ef has been reserved
system 00:08: ioport range 0x480-0x48f has been reserved
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0xd800-0xd87f has been reserved
system 00:08: ioport range 0xd880-0xd89f has been reserved
system 00:08: ioport range 0xe000-0xe07f has been reserved
system 00:08: ioport range 0xe080-0xe0ff has been reserved
system 00:08: ioport range 0xe400-0xe47f has been reserved
system 00:08: ioport range 0xe480-0xe4ff has been reserved
system 00:08: ioport range 0xe800-0xe87f has been reserved
system 00:08: ioport range 0xe880-0xe8ff has been reserved
system 00:08: ioport range 0xec00-0xec7f has been reserved
system 00:08: ioport range 0xec80-0xecff has been reserved
system 00:08: ioport range 0xeeb0-0xeebf has been reserved
system 00:08: ioport range 0xeec0-0xeeff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:0b.0:   IO window: 0x00b000-0x00b0ff
pci 0000:01:0b.0:   IO window: 0x00b400-0x00b4ff
pci 0000:01:0b.0:   PREFETCH window: 0x28000000-0x2bffffff
pci 0000:01:0b.0:   MEM window: 0x30000000-0x33ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
pci 0000:00:1e.0:   MEM window: 0xcff00000-0xcfffffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000028000000-0x0000002bffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:0b.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:01:0b.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xb000-0xbfff]
bus: 01 index 1 mmio: [0xcff00000-0xcfffffff]
bus: 01 index 2 mmio: [0x28000000-0x2bffffff]
bus: 01 index 3 io port: [0x00-0xffff]
bus: 01 index 4 mmio: [0x000000-0xffffffff]
bus: 02 index 0 io port: [0xb000-0xb0ff]
bus: 02 index 1 io port: [0xb400-0xb4ff]
bus: 02 index 2 mmio: [0x28000000-0x2bffffff]
bus: 02 index 3 mmio: [0x30000000-0x33ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x7c set to 0x1
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
squashfs: version 3.4 (2008/08/26) Phillip Lougher
fuse init (API version 7.10)
msgmni has been set to 961
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
ACPI: AC Adapter [ADP1] (on-line)
ACPI Warning (nspredef-0858): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20080926]
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
acpi device:0f: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/input/input3
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (29 C)
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 16252K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
Serial: 8250/16550 driver1 ports, IRQ sharing disabled
00:09: ttyS0 at I/O 0x338 (irq = 4) is a 16550A
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
loop: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xcfffe000, irq 11, MAC addr 00:0e:7b:67:bc:76
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ipw2200 0000:01:05.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200 0000:01:05.0: firmware: using built-in firmware ipw2200-bss.fw
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xafa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xafa8 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
Switched to high resolution mode on CPU 0
ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-831S  1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ohci1394 0000:01:0b.2: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ohci1394 0000:01:0b.2: PCI INT C -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[cff05000-cff057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth2: IPv4 over IEEE 1394 (fw-host0)
yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:01:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:01:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:01:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:01:0b.0: TI: mfunc 0x01aa1b02, devctl 0x64
yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x00f8, PCI irq 11
yenta_cardbus 0000:01:0b.0: Socket status: 30000006
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x2c080000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000cfe0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000cf80
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000cf60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input4
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:0b.4: SDHCI controller found [104c:8034] (rev 0)
sdhci-pci 0000:01:0b.4: enabling device (0000 -> 0002)
sdhci-pci 0000:01:0b.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI controller on PCI [0000:01:0b.4] using DMA
mmc1: SDHCI controller on PCI [0000:01:0b.4] using DMA
mmc2: SDHCI controller on PCI [0000:01:0b.4] using DMA
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
Marking TSC unstable due to TSC halts in idle
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
intel8x0_measure_ac97_clock: measured 55917 usecs
intel8x0: measured clock 196 rejected
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel 82801DB-ICH4 with AD1981B at irq 11
nf_conntrack version 0.5.0 (7925 buckets, 31700 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
rtc_cmos 00:07: setting system clock to 2009-06-07 17:49:50 UTC (1244396990)
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000390000773a0e]
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 6140k freed
Clocksource tsc unstable (delta = -72420310 ns)
usb 4-2.3: new low speed USB device using uhci_hcd and address 3
usb 4-2.3: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.3/4-2.3:1.0/input/input8
generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2.3/input0
usb 4-2.4: new low speed USB device using uhci_hcd and address 4
usb 4-2.4: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.4/4-2.4:1.0/input/input9
generic-usb 0003:046D:C502.0002: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.4/4-2.4:1.1/input/input10
generic-usb 0003:046D:C502.0003: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2.4/input1
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 524280k swap on /dev/mapper/crypt-swap.  Priority:-1 extents:1 across:524280k
e100: eth_wired: e100_watchdog: link up, 100Mbps, full-duplex
[drm:i915_setparam] *ERROR* unknown parameter 4
[drm:i915_getparam] *ERROR* Unknown parameter 6
[drm:i915_getparam] *ERROR* Unknown parameter 6