BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-hardened-r9 (root@dijkstra) (gcc version 4.4.0 (Gentoo 4.4.0 p1.0) ) #2 Sat Jun 6 21:25:12 PDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ef50000 (usable) BIOS-e820: 000000001ef50000 - 000000001ef60000 (ACPI data) BIOS-e820: 000000001ef60000 - 000000001f000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x1ef50 max_arch_pfn = 0x100000 kernel direct mapping tables up to 1ef50000 @ 7000-d000 495MB LOWMEM available. mapped low ram: 0 - 1ef50000 low ram: 00000000 - 1ef50000 bootmap 00001000 - 00004dec (6 early reservations) ==> bootmem [0000000000 - 001ef50000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000200000 - 0000b78c54] TEXT DATA BSS ==> [0000200000 - 0000b78c54] #2 [0000b79000 - 0000b7d000] INIT_PG_TABLE ==> [0000b79000 - 0000b7d000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001ef50 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001ef50 On node 0 totalpages: 126703 free_area_init_node: node 0, pgdat c0b374d8, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 959 pages used for memmap Normal zone: 121745 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc10000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125712 Kernel command line: root=/dev/sda2 panic=60 quiet lapic reboot=acpi ipw2200.associate=0 ipw2200.antenna=2 ipw2200.hwcrypto=1 hpet=force Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) TSC: Using PIT calibration value Detected 1695.747 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 492540k/507200k available (2214k kernel code, 14096k reserved, 190k data, 6140k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffec000 - 0xfffff000 ( 76 kB) vmalloc : 0xdf750000 - 0xfffea000 ( 520 MB) lowmem : 0xc0000000 - 0xdef50000 ( 495 MB) .init : 0xc0201000 - 0xc0800000 (6140 kB) .data : 0xc0b11000 - 0xc0b40868 ( 190 kB) .text : 0xc0800000 - 0xc0a2996d (2214 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.49 BogoMIPS (lpj=6782988) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed net_namespace: 500 bytes NET: Registered protocol family 16 bios32_service: base:000f0000 length:00010000 entry:0000d56a PCI: PCI BIOS revision 2.10 entry at 0xd56a, last bus=3 PCI: Using configuration type 1 for base access SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:02.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff] pci 0000:00:02.0: reg 18 io port: [0xeff8-0xefff] pci 0000:00:02.0: supports D1 pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x7ffffff] pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff] pci 0000:00:02.1: supports D1 pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff] pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f] pci 0000:00:1d.2: reg 20 io port: [0xcf60-0xcf7f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0xaff8-0xafff] pci 0000:00:1f.1: reg 14 io port: [0xaff4-0xaff7] pci 0000:00:1f.1: reg 18 io port: [0xafe8-0xafef] pci 0000:00:1f.1: reg 1c io port: [0xafe4-0xafe7] pci 0000:00:1f.1: reg 20 io port: [0xafa0-0xafaf] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.5: reg 10 io port: [0x00-0xff] pci 0000:00:1f.5: reg 14 io port: [0x00-0x3f] pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0x00-0xff] pci 0000:00:1f.6: reg 14 io port: [0x00-0x7f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:05.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff] pci 0000:01:05.0: PME# supported from D0 D3hot D3cold pci 0000:01:05.0: PME# disabled pci 0000:01:08.0: reg 10 32bit mmio: [0xcfffe000-0xcfffefff] pci 0000:01:08.0: reg 14 io port: [0xbf40-0xbf7f] pci 0000:01:08.0: supports D1 D2 pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:08.0: PME# disabled pci 0000:01:0b.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:01:0b.0: supports D1 D2 pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:0b.0: PME# disabled pci 0000:01:0b.2: reg 10 32bit mmio: [0x000000-0x0007ff] pci 0000:01:0b.2: reg 14 32bit mmio: [0x000000-0x003fff] pci 0000:01:0b.2: supports D1 D2 pci 0000:01:0b.2: PME# supported from D0 D1 D2 D3hot pci 0000:01:0b.2: PME# disabled pci 0000:01:0b.4: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:01:0b.4: reg 14 32bit mmio: [0x000000-0x0000ff] pci 0000:01:0b.4: reg 18 32bit mmio: [0x000000-0x0000ff] pci 0000:01:0b.4: supports D1 D2 pci 0000:01:0b.4: PME# supported from D0 D1 D2 D3hot pci 0000:01:0b.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:24cc] PCI: setting IRQ 11 as level-triggered pci 0000:00:1d.7: found PCI INT D -> IRQ 11 pci 0000:00:1f.5: found PCI INT B -> IRQ 11 pci 0000:00:1f.5: sharing IRQ 11 with 0000:00:1f.6 pci 0000:01:0b.0: found PCI INT A -> IRQ 11 pci 0000:01:0b.0: sharing IRQ 11 with 0000:00:1d.2 pci 0000:01:0b.0: sharing IRQ 11 with 0000:00:1f.1 pci 0000:01:0b.2: found PCI INT C -> IRQ 11 pci 0000:01:0b.4: found PCI INT D -> IRQ 11 pci 0000:01:0b.4: sharing IRQ 11 with 0000:00:1d.1 hpet clockevent registered pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02 pci 0000:01:0b.0: IO window: 0x00b000-0x00b0ff pci 0000:01:0b.0: IO window: 0x00b400-0x00b4ff pci 0000:01:0b.0: PREFETCH window: 0x28000000-0x2bffffff pci 0000:01:0b.0: MEM window: 0x30000000-0x33ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xb000-0xbfff pci 0000:00:1e.0: MEM window: 0xcff00000-0xcfffffff pci 0000:00:1e.0: PREFETCH window: 0x00000028000000-0x0000002bffffff pci 0000:00:1e.0: setting latency timer to 64 pci 0000:01:0b.0: found PCI INT A -> IRQ 11 pci 0000:01:0b.0: sharing IRQ 11 with 0000:00:1d.2 pci 0000:01:0b.0: sharing IRQ 11 with 0000:00:1f.1 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0xb000-0xbfff] bus: 01 index 1 mmio: [0xcff00000-0xcfffffff] bus: 01 index 2 mmio: [0x28000000-0x2bffffff] bus: 01 index 3 io port: [0x00-0xffff] bus: 01 index 4 mmio: [0x000000-0xffffffff] bus: 02 index 0 io port: [0xb000-0xb0ff] bus: 02 index 1 io port: [0xb400-0xb4ff] bus: 02 index 2 mmio: [0x28000000-0x2bffffff] bus: 02 index 3 mmio: [0x30000000-0x33ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 platform rtc_cmos: registered platform RTC device (no PNP device found) Microcode Update Driver: v2.00 , Peter Oruba squashfs: version 3.4 (2008/08/26) Phillip Lougher fuse init (API version 7.10) msgmni has been set to 962 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855GM Chipset agpgart-intel 0000:00:00.0: detected 16252K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 [drm] Initialized drm 1.1.0 20060810 PCI: setting IRQ 10 as level-triggered pci 0000:00:02.0: found PCI INT A -> IRQ 10 pci 0000:00:02.0: sharing IRQ 10 with 0000:00:1d.0 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 Serial: 8250/16550 driver1 ports, IRQ sharing disabled serial 0000:00:1f.6: enabling device (0000 -> 0001) serial 0000:00:1f.6: found PCI INT B -> IRQ 11 serial 0000:00:1f.6: sharing IRQ 11 with 0000:00:1f.5 loop: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:01:08.0: found PCI INT A -> IRQ 11 e100 0000:01:08.0: PME# disabled e100: eth0: e100_probe: addr 0xcfffe000, irq 11, MAC addr 00:0e:7b:67:bc:76 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr ipw2200: Copyright(c) 2003-2006 Intel Corporation ipw2200 0000:01:05.0: found PCI INT A -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection ipw2200 0000:01:05.0: firmware: using built-in firmware ipw2200-bss.fw ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: found PCI INT A -> IRQ 11 ata_piix 0000:00:1f.1: sharing IRQ 11 with 0000:00:1d.2 ata_piix 0000:00:1f.1: sharing IRQ 11 with 0000:01:0b.0 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xafa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xafa8 irq 15 ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.02, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<7>Switched to high resolution mode on CPU 0 sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-831S 1.02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ohci1394 0000:01:0b.2: enabling device (0000 -> 0002) ohci1394 0000:01:0b.2: found PCI INT C -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[cff05000-cff057ff] Max Packet=[2048] IR/IT contexts=[4/8] video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized eth1394: eth2: IPv4 over IEEE 1394 (fw-host0) yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001] yenta_cardbus 0000:01:0b.0: Enabling burst memory read transactions yenta_cardbus 0000:01:0b.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:01:0b.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:01:0b.0: TI: mfunc 0x01aa1b02, devctl 0x64 yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x00f8, PCI irq 11 yenta_cardbus 0000:01:0b.0: Socket status: 30000006 yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) ehci_hcd 0000:00:1d.7: found PCI INT D -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0x2c080000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10 uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:00:02.0 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000cfe0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11 uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:01:0b.4 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000cf80 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 11 uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:00:1f.1 uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:01:0b.0 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000cf60 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver xpad xpad: X-Box pad driver input: PC Speaker as /devices/platform/pcspkr/input/input0 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:01:0b.4: SDHCI controller found [104c:8034] (rev 0) sdhci-pci 0000:01:0b.4: enabling device (0000 -> 0002) sdhci-pci 0000:01:0b.4: found PCI INT D -> IRQ 11 sdhci-pci 0000:01:0b.4: sharing IRQ 11 with 0000:00:1d.1 mmc0: SDHCI controller on PCI [0000:01:0b.4] using DMA mmc1: SDHCI controller on PCI [0000:01:0b.4] using DMA mmc2: SDHCI controller on PCI [0000:01:0b.4] using DMA usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003) Intel ICH 0000:00:1f.5: found PCI INT B -> IRQ 11 Intel ICH 0000:00:1f.5: sharing IRQ 11 with 0000:00:1f.6 Intel ICH 0000:00:1f.5: setting latency timer to 64 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice hub 4-2:1.0: USB hub found hub 4-2:1.0: 4 ports detected intel8x0_measure_ac97_clock: measured 55928 usecs intel8x0: measured clock 196 rejected intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at irq 11 nf_conntrack version 0.5.0 (7925 buckets, 31700 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode rtc_cmos rtc_cmos: setting system clock to 2009-06-07 05:29:11 UTC (1244352551) ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000390000773a0e] kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 6140k freed usb 4-2.3: new low speed USB device using uhci_hcd and address 3 usb 4-2.3: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.3/4-2.3:1.0/input/input4 generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2.3/input0 usb 4-2.4: new low speed USB device using uhci_hcd and address 4 usb 4-2.4: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.4/4-2.4:1.0/input/input5 generic-usb 0003:046D:C502.0002: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2.4/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.4/4-2.4:1.1/input/input6 generic-usb 0003:046D:C502.0003: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2.4/input1 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:524280k e100: eth_wired: e100_watchdog: link up, 100Mbps, full-duplex [drm:i915_setparam] *ERROR* unknown parameter 4 [drm:i915_getparam] *ERROR* Unknown parameter 6 [drm:i915_getparam] *ERROR* Unknown parameter 6