[patch] Modified files/foo2zjs-20081129-udevfwld.patch to support further printer models

foo2zjs-20081129-udevfwld.patch (text/plain), 8.22 KB, created by Martin Väth on 2009-05-24 16:01:18 UTC

--- Makefile
+++ Makefile
@@ -20,6 +20,10 @@
 PREFIX=/usr
 PREFIX=$(DESTDIR)/usr
 
+# USB_PRINTERID is also installed there because it is needed by the FWloader
+FWLOADERDIR=$(DESTDIR)/sbin
+FIRMWAREDIR=$(DESTDIR)/lib/firmware
+
 # Pathnames for this package...
 BIN=$(PREFIX)/bin
 SHAREZJS=$(PREFIX)/share/foo2zjs
@@ -661,21 +665,21 @@
 	    fi; \
 	done
 	# foo2zjs Firmware files (if any)
-	$(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(SHAREZJS)/firmware/
+	$(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(FIRMWAREDIR)/
 	for i in sihp1*.img; do \
 	    if [ -f $$i ]; then \
 		base=`basename $$i .img`; \
 		./arm2hpdl $$i >$$base.dl; \
-		$(INSTALL) -c -m 644 $$base.dl $(SHAREZJS)/firmware/; \
+		$(INSTALL) -c -m 644 $$base.dl $(FIRMWAREDIR)/; \
 	    fi; \
 	done
 	# foo2xqx Firmware files (if any)
-	$(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(SHAREXQX)/firmware/
+	$(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(FIRMWAREDIR)/
 	for i in sihpP*.img; do \
 	    if [ -f $$i ]; then \
 		base=`basename $$i .img`; \
 		./arm2hpdl $$i >$$base.dl; \
-		$(INSTALL) -c -m 644 $$base.dl $(SHAREXQX)/firmware/; \
+		$(INSTALL) -c -m 644 $$base.dl $(FIRMWAREDIR)/; \
 	    fi; \
 	done
 	# foo2oak ICM files (if any)
@@ -818,6 +822,8 @@
 UDEVDIR=$(DESTDIR)/etc/udev/rules.d
 RULES=hplj10xx.rules
 install-udev:
+	[ -d $(FWLOADERDIR) ] || install -d -m 755 $(FWLOADERDIR)/
+	install -c -m 755 foo2zjs-loadfw $(FWLOADERDIR)/
 	[ -d $(UDEVDIR) ] || install -d -m 755 $(UDEVDIR)/
 	install -c -m 644 $(RULES) $(UDEVDIR)/11-$(RULES)
 
--- foo2zjs-loadfw
+++ foo2zjs-loadfw
@@ -0,0 +1,151 @@
+#!/bin/sh
+
+#	foo2zjs-loadfw:
+#
+#	Hotplug script for 100[05],1018,1020,P100[5678],P1505,P1505n
+#	USB laser printers. The model number
+#	that this script deals with is determined from the udev env.
+#
+#	Used to download firmware automatically into the printer when it
+#	is powered up or plugged into the USB port.
+#
+#	The inspiration fo this script is from:
+#		Oscar Santacreu. Alicante-Spain (2002)
+#		Mike Morgan (2004)
+#	Modified by Stefan Schweizer (2005) to work as a udev-RUN-script
+
+#
+# Directory to find downloadable HP firmware files sihpMMMM.dl
+#
+FWDIR=/lib/firmware
+
+#
+# Program used to determine USB printer id information
+#
+USBID=/bin/usb_printerid
+
+#
+# Timeout to load firmware
+#
+TIMEOUT=6
+
+#
+#	Figure out how to log our messages
+#
+if [ -t 1 ]; then
+    # Running from a tty...
+    log() {
+	echo "$0: $@"
+    }
+elif [ -x /usr/bin/logger ]; then
+    # Have logger...
+    log() {
+	logger -t "$0" -- "$@"
+    }
+else
+    # No logger...
+    log() {
+	echo "$0: $@" >> /var/log/messages
+    }
+fi
+
+#
+#	Figure out the model number from the argument of this script
+#
+MODELNAME=''
+FWMODEL=''
+case "$1" in
+P1005)
+	MODEL=P1005
+	;;
+P1006)
+	MODEL=P1006
+	;;
+P1007)
+	MODEL=P1007
+	FWMODEL=P1005
+	;;
+P1008)
+	MODEL=P1008
+	FWMODEL=P1006
+	;;
+P1505)
+	MODEL=P1505
+	;;
+P1505n)
+	MODEL=P1505n
+	FWMODEL=P1505
+	;;
+1000)
+	MODEL=1000
+	MODELNAME="hp LaserJet $MODEL"
+	;;
+1005)
+	MODEL=1005
+	MODELNAME="hp LaserJet $MODEL"
+	;;
+1018)
+	MODEL=1018
+	;;
+1020)
+	MODEL=1020
+	;;
+*)
+	log "Only HP LaserJet 100[05],1018,1020,P100[5678],P1505,P1505n are supported"
+	log "You need to supply one of these on the cmdline: $0 10**"
+	exit
+	;;
+esac
+: ${MODELNAME:="HP LaserJet $MODEL"}
+: ${FWMODEL:="$MODEL"}
+
+if [ -n "$2" ]; then
+    DEVNAME=$2
+elif [ -n "$DEVNAME" ]; then
+    log 'using $DEVNAME'
+else
+    log "You need to either have $DEVNAME set in the environment or supply it on the cmdline, like:"
+    log "$0 10** /dev/usb/lp0"
+    exit 1
+fi
+
+#
+#	Procedure to load a single device with firmware
+#
+load1() {
+    fw="$FWDIR/sihp$FWMODEL.dl"
+    if [ ! -f "$fw" ]; then
+	log "Missing HP LaserJet $MODEL firmware file $fw"
+	log "...read foo2zjs installation instructions and run ./getweb $MODEL"
+	return 1
+    fi
+
+    log "loading HP LaserJet $MODEL firmware $fw to $DEVNAME ..."
+    if cat $fw > $DEVNAME; then
+	sleep $TIMEOUT
+	log "... download successful."
+    else
+	log "... download failed."
+    fi
+    return 0
+}
+
+#
+#	OK, now download firmware to any printers that need it
+#
+if [ -x $USBID ]; then
+	if $USBID $DEVNAME | grep "$MODELNAME" 2> /dev/null; then
+	    # This is a LaserJet 100x
+	    if $USBID $DEVNAME | grep 'FWVER' 2> /dev/null; then
+		log "HP LaserJet $MODEL firmware already loaded into $DEVNAME"
+	    else
+		# Firmware is not yet loaded
+		load1 "$DEVNAME"
+	    fi
+	else
+	    log "No supported printer found."
+	fi
+else
+    log "HP LaserJet $MODEL firmware was not downloaded..."
+    log "...couldn't find $USBID"
+fi
--- hplj1000
+++ hplj1000
@@ -35,7 +35,7 @@
 #
 # Directory to find downloadable HP firmware files sihpMMMM.dl
 #
-FWDIR=/usr/share/foo2zjs/firmware
+FWDIR=/lib/firmware
 
 #
 # Program used to determine USB printer id information
--- hplj10xx.rules
+++ hplj10xx.rules
@@ -1,36 +1,21 @@
-#Own udev rule for HP Laserjet 1000
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="hp LaserJet 1000", NAME="usb/%k", \
-	SYMLINK+="hplj1000-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1000" 
-#Own udev rule for HP Laserjet 1005
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="hp LaserJet 1005 series", NAME="usb/%k", \
-	SYMLINK+="hplj1005-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1005" 
-#Own udev rule for HP Laserjet 1018
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet 1018", NAME="usb/%k", \
-	SYMLINK+="hplj1018-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1018" 
-#Own udev rule for HP Laserjet 1020
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet 1020", NAME="usb/%k", \
-	SYMLINK+="hplj1020-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1020" 
-#Own udev rule for HP Laserjet P1005
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet P1005", NAME="usb/%k", \
-	SYMLINK+="hpljP1005-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1005" 
-#Own udev rule for HP Laserjet P1006
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet P1006", NAME="usb/%k", \
-	SYMLINK+="hpljP1006-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1006" 
-#Own udev rule for HP Laserjet P1007
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet P1007", NAME="usb/%k", \
-	SYMLINK+="hpljP1007-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1007" 
-#Own udev rule for HP Laserjet P1008
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet P1008", NAME="usb/%k", \
-	SYMLINK+="hpljP1008-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1008" 
-#Own udev rule for HP Laserjet P1505
-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \
-	SYSFS{product}=="HP LaserJet P1505", NAME="usb/%k", \
-	SYMLINK+="hpljP1505-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1505" 
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="3d17", RUN+="/sbin/foo2zjs-loadfw P1005 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="3e17", RUN+="/sbin/foo2zjs-loadfw P1006 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="4817", RUN+="/sbin/foo2zjs-loadfw P1007 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="4917", RUN+="/sbin/foo2zjs-loadfw P1008 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="3f17", RUN+="/sbin/foo2zjs-loadfw P1505 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="4017", RUN+="/sbin/foo2zjs-loadfw P1505n $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="0517", RUN+="/sbin/foo2zjs-loadfw 1000 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="1317", RUN+="/sbin/foo2zjs-loadfw 1005 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="4117", RUN+="/sbin/foo2zjs-loadfw 1018 $tempnode"
+ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \
+   ATTRS{idProduct}=="2b17", RUN+="/sbin/foo2zjs-loadfw 1020 $tempnode"
+