Dmesg of the computer where the bug is seen

dmesg.txt (text/plain), 7.66 KB, created by Pascal Lalonde on 2003-10-14 01:06:52 UTC

Linux version 2.4.20-gentoo-r7 (root@doublebarrel) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r1, propolice)) #1 Sat Sep 13 01:12:40 EDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
 BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Gentoo ro root=302
Initializing CPU#0
Detected 2000.219 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 512860k/524272k available (1396k kernel code, 8848k reserved, -1636k data, 84k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([e-mail])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf15e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([e-mail])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [e-mail]).
Detected PS/2 Mouse Port.
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:DMA
hda: WDC WD400BB-00AUA1, ATA DISK drive
hdd: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c016cec4, I/O limit 4095Mb (mask 0xffffffff)
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
systrace: systrace initialized
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k freed
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HL-DT-ST  Model: CD-ROM GCR-8520B  Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
PCI: Found IRQ 10 for device 00:0e.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0e.0: 3Com PCI 3c905C Tornado at 0xd000. Vers LK1.1.16
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 12, want irq 3
IRQ routing conflict for 00:10.1, have irq 12, want irq 3
IRQ routing conflict for 00:10.2, have irq 12, want irq 3
IRQ routing conflict for 00:10.3, have irq 12, want irq 3
uhci.c: USB UHCI at I/O 0xb800, IRQ 12
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 12, want irq 3
IRQ routing conflict for 00:10.1, have irq 12, want irq 3
IRQ routing conflict for 00:10.2, have irq 12, want irq 3
IRQ routing conflict for 00:10.3, have irq 12, want irq 3
uhci.c: USB UHCI at I/O 0xb400, IRQ 12
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 12, want irq 3
IRQ routing conflict for 00:10.1, have irq 12, want irq 3
IRQ routing conflict for 00:10.2, have irq 12, want irq 3
IRQ routing conflict for 00:10.3, have irq 12, want irq 3
uhci.c: USB UHCI at I/O 0xb000, IRQ 12
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[e-mail]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 16 19:03:09 PDT 2003
Creative EMU10K1 PCI Audio Driver, version 0.20, 01:18:38 Sep 13 2003
PCI: Found IRQ 5 for device 00:0b.0
emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xd800-0xd81f, IRQ 5
ac97_codec: AC97 Audio codec, id: CRY19(Cirrus Logic CS4297A rev A)
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub.c: new USB device 00:10.0-1, assigned address 2
input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:2.0
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
0: NVRM: AGPGART: unable to retrieve symbol table
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
sr0: mmc-3 profile capable, current profile: 8h
Uniform CD-ROM driver Revision: 3.12