backtrace of the crash

Xorg.0.log (text/plain), 26.00 KB, created by Panard on 2009-05-04 21:29:33 UTC

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo x86_64 
Current Operating System: Linux barney 2.6.29-gentoo-r2 #1 SMP PREEMPT Mon May 4 21:05:11 CEST 2009 x86_64
Build Date: 04 May 2009  08:49:39PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May  4 21:14:59 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "default"
(**) |-->Screen "LVDS" (0)
(**) |   |-->Monitor "Auto monitor"
(**) |   |-->Device "Auto device"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(**) FontPath set to:
	/usr/share/fonts/dejavu,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/misc/,
	/usr/share/fonts/75dpi/,
	built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x3500
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4400000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4500000/1048576
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"

(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"

(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"

(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"

(II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "wacom"

(II) Loading /usr/lib64/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xE4400000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Auto monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib64/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.4.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x80000207
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000206
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00404000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 234752 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 939004 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xe4400000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0cd40000 (pgoffset 52544)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0cd3ffff: DRI memory manager (202500 kB)
(II) intel(0): 0x0cd40000-0x0dffffff: exa offscreen (19200 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00ddefff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x00f9f000-0x015defff: back buffer (6400 kB) X tiled
(II) intel(0): 0x0179f000-0x01ddefff: front buffer (6400 kB) X tiled
(II) intel(0): 0x01f9f000-0x01f9ffff: overlay registers (4 kB)
(II) intel(0): 0x01fa0000-0x01fa9fff: HW cursors (40 kB)
(II) intel(0): 0x0cd40000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd179f000, handle = 0xd179f000
(II) intel(0): [drm] mapped back buffer at 0xd0f9f000, handle = 0xd0f9f000
(II) intel(0): [drm] mapped depth buffer at 0xd079f000, handle = 0xd079f000
(II) intel(0): [drm] mapped classic textures at 0xde000000, handle = 0xde000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(EE) AIGLX error: dlopen of /usr/lib64/dri/i965_dri.so failed (/usr/lib64/dri/i965_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 261 x 163
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/ttyS0
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) /dev/ttyS0: Tablet PC buttons are on 
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/ttyS0
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) evaluating device (stylus)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) evaluating device (eraser)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=26312 maxY=16520 maxZ=255 resX=2540 resY=2540  tilt=disabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=26312 bottom Y=16520 resol X=2540 resol Y=2540
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=26312 bottom Y=16520 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: always reports core events
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer device is /dev/ttyS0
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer is in absolute mode
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: threshold = 15
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: max x set to 26312 by xorg.conf
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: max y set to 16520 by xorg.conf
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: max z = 255
(**) /dev/ttyS0: Tablet PC buttons are on 
(**) Option "BaudRate" "9600"
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Serial Tablet PC Pen Tablet/Digitizer" (type: Wacom Stylus)
(EE) Wacom Serial Tablet PC Pen Tablet/Digitizer: Top/Bottom area overlaps with another devices.
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer eraser
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: always reports core events
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser device is /dev/ttyS0
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser is in absolute mode
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: threshold = 15
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: max x set to 26312 by xorg.conf
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: max y set to 16520 by xorg.conf
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" (type: Wacom Eraser)
(EE) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: Top/Bottom area overlaps with another devices.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"

(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event5"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (48.1 kHz)
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (48.1 kHz)
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (48.1 kHz)
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): EDID vendor "BOE", prod id 2203
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (48.1 kHz)
(II) intel(0): EDID vendor "BOE", prod id 2203

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ea426]
1: /usr/bin/X(xf86SigHandler+0x39) [0x47c9c9]
2: /lib/libc.so.6 [0x7f5a05575270]
3: /usr/lib64/xorg/modules/input//wacom_drv.so [0x7f5a041d511b]
4: /usr/lib64/xorg/modules/input//wacom_drv.so [0x7f5a041d57c4]
5: /usr/lib64/xorg/modules/input//wacom_drv.so [0x7f5a041d5a64]
6: /usr/bin/X(ActivateDevice+0x26) [0x443116]
7: /usr/bin/X(OpenInputDevice+0x10) [0x47bd00]
8: /usr/bin/X(ProcXOpenDevice+0xc6) [0x5358f6]
9: /usr/bin/X(Dispatch+0x364) [0x44a2e4]
10: /usr/bin/X(main+0x44d) [0x430b2d]
11: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f5a055615c6]
12: /usr/bin/X [0x42ff19]

Fatal server error:
Caught signal 11.  Server aborting

(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1