My current xorg.conf

xorg.conf (text/plain), 5.06 KB, created by Stefan Kamphausen on 2009-04-25 21:46:15 UTC

# Auto-generated by mkxf86config

Section "ServerLayout"

# PS/2 Mouse not detected
# Serial Mouse not detected
	Identifier     "X.Org Configured"
	Screen      0  "aticonfig-Screen[0]" 0 0
	#InputDevice    "Keyboard0" "CoreKeyboard"
	#InputDevice    "USB Mouse" "AlwaysCore"
	#InputDevice    "Synaptics" "AlwaysCore"
EndSection

Section "Files"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/75dpi"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/corefonts"
	FontPath     "/usr/share/fonts/cyrilloc"
	FontPath     "/usr/share/fonts/default"
	FontPath     "/usr/share/fonts/encodings"
	FontPath     "/usr/share/fonts/freefonts"
	FontPath     "/usr/share/fonts/intlfonts"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/sharefonts"
	FontPath     "/usr/share/fonts/tengwar-fonts"
	FontPath     "/usr/share/fonts/ttf-bitstream-vera"
	FontPath     "/usr/share/fonts/unifont"
	FontPath     "/usr/share/fonts/urw-fonts"
	FontPath     "/usr/share/fonts/util"
	FontPath     "/usr/share/fonts"
EndSection

Section "Module"
	Load  "ddc"
	Load  "vbe"
	Load  "GLcore"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "bitmap"
	Load  "speedo"
	Load  "type1"
	Load  "freetype"
	Load  "record"
EndSection

Section "ServerFlags"
	Option	    "AllowMouseOpenFail" "true"
EndSection

#Section "InputDevice"
#	Identifier  "Keyboard0"
#	Driver      "kbd"
#	Option	    "CoreKeyboard"
#	Option	    "XkbModel" "pc105"
#	Option	    "XkbLayout" "de"
	# Option	    "XkbOptions" "grp:toggle,grp_led:scroll"
#	Option	    "XkbVariant" "nodeadkeys"
#EndSection

#Section "InputDevice"
#	Identifier  "Serial Mouse"
#	Driver      "mouse"
#	Option	    "Protocol" "Microsoft"
#	Option	    "Device" "/dev/ttyS0"
#	Option	    "Emulate3Buttons" "true"
#	Option	    "Emulate3Timeout" "70"
#	Option	    "SendCoreEvents" "true"
#EndSection

#Section "InputDevice"
#	Identifier  "PS/2 Mouse"
#	Driver      "mouse"
#	Option	    "Protocol" "IMPS/2"
#	Option	    "Device" "/dev/misc/psaux"
#	Option	    "Emulate3Buttons" "true"
#	Option	    "Emulate3Timeout" "70"
#	Option	    "SendCoreEvents" "true"
#	Option	    "ZAxisMapping" "4 5"
#EndSection

#Section "InputDevice"
#	Identifier  "USB Mouse"
#	Driver      "mouse"
#	Option	    "Device" "/dev/input/mice"
#	Option	    "SendCoreEvents" "true"
#	Option	    "Protocol" "IMPS/2"
#	Option	    "ZAxisMapping" "4 5"
#	Option	    "Buttons" "5"
#EndSection

#Section "InputDevice"
#	Identifier  "Synaptics"
#	Driver      "synaptics"
#	Option	    "Protocol" "event"
#	#Option	    "Device" "/dev/input/event1"
#	Option	    "Device" "/sys/devices/platform/i8042/serio1/input/input2"
#	Option	    "LeftEdge" "1900"
#	Option	    "RightEdge" "5400"
#	Option	    "TopEdge" "1900"
#	Option	    "BottomEdge" "4000"
#	Option	    "FingerLow" "25"
#	Option	    "FingerHigh" "30"
#	Option	    "MaxTapTime" "180"
#	Option	    "MaxTapMove" "220"
#	Option	    "VertScrollDelta" "100"
#	Option	    "MinSpeed" "0.02"
#	Option	    "MaxSpeed" "0.10"
#	Option	    "AccelFactor" "0.0010"
#	Option	    "SHMConfig" "on"
#EndSection

Section "Monitor"
	Identifier   "Monitor0"
	HorizSync    28.0 - 96.0
	VertRefresh  50.0 - 75.0
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"

	### Available Driver options are:-
	# sw_cursor is needed for some ati and radeon cards
	#Option     "sw_cursor"
	#Option     "hw_cursor"
	#Option     "NoAccel"
	#Option     "ShowCache"
	#Option     "ShadowFB"
	#Option     "UseFBDev"
	#Option     "Rotate"
	# The following line is auto-generated by x11-misc/mkxf86config
#	BusID       "PCI:1:0:0"
	Identifier  "Card0"
	Driver      "vesa"
	VendorName  "All"
	BoardName   "All"
EndSection

Section "Device"

	# Option	    "EnableMonitor" "crt1"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
#	Option	    "EnableMonitor" "lvds"
#	Option	    "VideoOverlay" "on"
#	Option	    "EnablePrivateBackZ" "on"
#	Option      "UseFastTLS" "1"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     32
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection