console output for server2 (works)

dmesg2.cons (text/plain), 21.22 KB, created by Alex Efros on 2009-04-02 12:04:37 UTC

BIOS EBDA/lowmem at: 0009a800/0009a800
Linux version 2.6.28-hardened-r7 (root@web) (gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.6, ssp-3.4.6-1.0, pie-8.7.10)) #1 SMP Thu Apr 2 02:50:08 GMT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Cyrix CyrixInstead
  NSC Geode by NSC
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
 BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cff10000 (usable)
 BIOS-e820: 00000000cff10000 - 00000000cff21000 (ACPI data)
 BIOS-e820: 00000000cff21000 - 00000000cff80000 (ACPI NVS)
 BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
last_pfn = 0x130000 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:404 generic_get_mtrr+0x107/0x110()
mtrr: your BIOS has set up an incorrect mask, fixing it up.
Pid: 0, comm: swapper Not tainted 2.6.28-hardened-r7 #1
Call Trace:
 [<c042d69b>] warn_slowpath+0x5b/0x90
 [<c056df00>] ? vsnprintf+0x220/0x4a0
 [<c04456ba>] ? up+0x2a/0x40
 [<c042e451>] ? release_console_sem+0x81/0xa0
 [<c042e451>] ? release_console_sem+0x81/0xa0
 [<c024625f>] ? dmi_string+0x4f/0x80
 [<c0410197>] generic_get_mtrr+0x107/0x110
 [<c022f1c8>] mtrr_trim_uncached_memory+0x98/0x2d0
 [<c042de48>] ? printk+0x18/0x20
 [<c022d53f>] ? e820_end_pfn+0xaf/0xd0
 [<c022f62f>] ? mtrr_bp_init+0x22f/0x250
 [<c022ad09>] setup_arch+0x299/0x3d0
 [<c02299e0>] start_kernel+0x40/0x1f0
 [<c022934c>] i386_start_kernel+0x5c/0x60
---[ end trace 847e4d83bdf41d97 ]---
NX (Execute Disable) protection: active
ACPI: RSDP 000F7130, 0014 (r0 PTLTD )
ACPI: RSDT CFF1CB9B, 0040 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP CFF20E08, 0074 (r1 HP     Trek      6040000 PTL         3)
ACPI: DSDT CFF1D287, 3B81 (r1     HP     Trek  6040000 MSFT  100000E)
ACPI: FACS CFF21FC0, 0040
ACPI: SPMI CFF20E7C, 0040 (r5 HP     Blakford  6040000 PTL         1)
ACPI: APIC CFF20EBC, 0090 (r1 PTLTD      APIC    6040000  LTP        0)
ACPI: MCFG CFF20F4C, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
ACPI: BOOT CFF20F88, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SPCR CFF20FB0, 0050 (r1 PTLTD  $UCRTBL$  6040000 PTL         1)
ACPI: SSDT CFF1CBDB, 06AC (r1 DpgPmm    CpuPm       12 INTL 20030224)
3974MB HIGHMEM available.
889MB LOWMEM available.
  mapped low ram: 0 - 379fe000
  low ram: 00000000 - 379fe000
  bootmap 0000a000 - 00010f40
(8 early reservations) ==> bootmem [0000000000 - 00379fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000200000 - 0000864b44]    TEXT DATA BSS ==> [0000200000 - 0000864b44]
  #4 [0000865000 - 000086e000]    INIT_PG_TABLE ==> [0000865000 - 000086e000]
  #5 [000009a800 - 0000100000]    BIOS reserved ==> [000009a800 - 0000100000]
  #6 [0000007000 - 000000a000]          PGTABLE ==> [0000007000 - 000000a000]
  #7 [000000a000 - 0000011000]          BOOTMAP ==> [000000a000 - 0000011000]
found SMP MP-table at [c00f7160] 000f7160
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000379fe
  HighMem  0x000379fe -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009a
    0: 0x00000100 -> 0x000cff10
    0: 0x00100000 -> 0x00130000
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
PERCPU: Allocating 12288 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1038505
Kernel command line: root=/dev/sda2 rw init=/sbin/runit-init console=ttyS0,115200
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 1595.919 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4145564k/4980736k available (2927k kernel code, 46424k reserved, 279k data, 2024k init, 3281992k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff81000 - 0xfffff000   ( 504 kB)
    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
      .init : 0xc0206000 - 0xc0400000   (2024 kB)
      .data : 0xc07c9000 - 0xc080ef80   ( 279 kB)
      .text : 0xc0400000 - 0xc06dbefd   (2927 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.83 BogoMIPS (lpj=15959190)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.96 BogoMIPS (lpj=15959816)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3191.97 BogoMIPS (lpj=15959863)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3191.96 BogoMIPS (lpj=15959811)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (12767.73 BogoMIPS).
net_namespace: 488 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 23
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: PME# disabled
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:16:00.0: PME# supported from D3hot D3cold
pci 0000:16:00.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 *5 6 7 10 11 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0xfe00-0xfe00 has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:02: iomem range 0xfec81000-0xfec81fff has been reserved
system 00:02: iomem range 0xfec81400-0xfec823ff could not be reserved
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0:   IO window: disabled
pci 0000:02:00.0:   MEM window: disabled
pci 0000:02:00.0:   PREFETCH window: disabled
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0:   IO window: disabled
pci 0000:01:00.0:   MEM window: disabled
pci 0000:01:00.0:   PREFETCH window: disabled
pci 0000:01:00.3: PCI bridge, secondary bus 0000:07
pci 0000:01:00.3:   IO window: disabled
pci 0000:01:00.3:   MEM window: disabled
pci 0000:01:00.3:   PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: disabled
pci 0000:00:02.0:   MEM window: 0xdc100000-0xdc1fffff
pci 0000:00:02.0:   PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:08
pci 0000:00:03.0:   IO window: disabled
pci 0000:00:03.0:   MEM window: disabled
pci 0000:00:03.0:   PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:04.0:   IO window: disabled
pci 0000:00:04.0:   MEM window: disabled
pci 0000:00:04.0:   PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:05.0:   IO window: disabled
pci 0000:00:05.0:   MEM window: disabled
pci 0000:00:05.0:   PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:06.0:   IO window: disabled
pci 0000:00:06.0:   MEM window: disabled
pci 0000:00:06.0:   PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:0f
pci 0000:00:07.0:   IO window: disabled
pci 0000:00:07.0:   MEM window: disabled
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:16
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xdc200000-0xdc2fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:17
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: disabled
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:18
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xdc300000-0xdcffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000de000000-0x000000deffffff
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 mmio: [0x0-0x0]
bus: 01 index 1 mmio: [0xdc100000-0xdc1fffff]
bus: 01 index 2 mmio: [0x0-0x0]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0x0-0x0]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0x0]
bus: 03 index 1 mmio: [0x0-0x0]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 07 index 0 mmio: [0x0-0x0]
bus: 07 index 1 mmio: [0x0-0x0]
bus: 07 index 2 mmio: [0x0-0x0]
bus: 07 index 3 mmio: [0x0-0x0]
bus: 08 index 0 mmio: [0x0-0x0]
bus: 08 index 1 mmio: [0x0-0x0]
bus: 08 index 2 mmio: [0x0-0x0]
bus: 08 index 3 mmio: [0x0-0x0]
bus: 0c index 0 mmio: [0x0-0x0]
bus: 0c index 1 mmio: [0x0-0x0]
bus: 0c index 2 mmio: [0x0-0x0]
bus: 0c index 3 mmio: [0x0-0x0]
bus: 0d index 0 mmio: [0x0-0x0]
bus: 0d index 1 mmio: [0x0-0x0]
bus: 0d index 2 mmio: [0x0-0x0]
bus: 0d index 3 mmio: [0x0-0x0]
bus: 0e index 0 mmio: [0x0-0x0]
bus: 0e index 1 mmio: [0x0-0x0]
bus: 0e index 2 mmio: [0x0-0x0]
bus: 0e index 3 mmio: [0x0-0x0]
bus: 0f index 0 mmio: [0x0-0x0]
bus: 0f index 1 mmio: [0x0-0x0]
bus: 0f index 2 mmio: [0x0-0x0]
bus: 0f index 3 mmio: [0x0-0x0]
bus: 16 index 0 mmio: [0x0-0x0]
bus: 16 index 1 mmio: [0xdc200000-0xdc2fffff]
bus: 16 index 2 mmio: [0x0-0x0]
bus: 16 index 3 mmio: [0x0-0x0]
bus: 17 index 0 mmio: [0x0-0x0]
bus: 17 index 1 mmio: [0x0-0x0]
bus: 17 index 2 mmio: [0x0-0x0]
bus: 17 index 3 mmio: [0x0-0x0]
bus: 18 index 0 mmio: [0x0-0x0]
bus: 18 index 1 mmio: [0xdc300000-0xdcffffff]
bus: 18 index 2 mmio: [0xde000000-0xdeffffff]
bus: 18 index 3 io port: [0x00-0xffff]
bus: 18 index 4 mmio: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x39 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1688
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport-driver 0000:00:02.0: found MSI capability
pcieport-driver 0000:00:03.0: found MSI capability
pcieport-driver 0000:00:04.0: found MSI capability
pcieport-driver 0000:00:05.0: found MSI capability
pcieport-driver 0000:00:06.0: found MSI capability
pcieport-driver 0000:00:07.0: found MSI capability
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:02:00.0: found MSI capability
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
processor ACPI_CPU:02: registered as cooling_device2
ACPI: Processor [CPU2] (supports 8 throttling states)
processor ACPI_CPU:03: registered as cooling_device3
ACPI: Processor [CPU3] (supports 8 throttling states)
intel_rng: FWH not detected
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b,  prod_id: 0x2001, dev_id: 0x12)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
IPMI poweroff: ATCA Detect mfg 0xB prod 0x2001
IPMI poweroff: Found a chassis style poweroff function
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
tg3.c:v3.94 (August 14, 2008)
tg3 0000:16:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:0b:84:bf:1e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1870 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1878 irq 15
ata1.00: ATA-7: FB080C4080,     HPF0, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: ATAPI: DW-224E-V, C.CA, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      FB080C4080       n/a  PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TEAC     DW-224E-V        C.CA PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
EDAC MC: Ver: 2.1.0 Apr  2 2009
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2009-04-02 11:02:09 UTC (1238670129)
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem).
Freeing unused kernel memory: 2024k freed
- runit: $Id: 25da3b86f7bed4038b8a039d2f8e8c9bbcf0822b $: booting.
- runit: enter stage: /etc/runit/1