This is my dmesg log for Dell inspiron 9400

dmesg.out (text/plain), 30.18 KB, created by Eugene on 2009-03-13 20:15:23 UTC

KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
 BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
 BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7fed3 max_arch_pfn = 0x3ffffffff
init_memory_mapping: 0000000000000000-000000007fed3000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007fed3000 page 4k
kernel direct mapping tables up to 7fed3000 @ 8000-c000
last_map_addr: 7fed3000 end: 7fed3000
RAMDISK: 37d7d000 - 37fef498
ACPI: RSDP 000FC1B0, 0014 (r0 DELL  )
ACPI: RSDT 7FED39CD, 0040 (r1 DELL    M07     27D70205 ASL        61)
ACPI: FACP 7FED4800, 0074 (r1 DELL    M07     27D70205 ASL        61)
ACPI: DSDT 7FED5400, 4841 (r1 INT430 SYSFexxx     1001 INTL 20050624)
ACPI: FACS 7FEE3C00, 0040
ACPI: HPET 7FED4F00, 0038 (r1 DELL    M07            1 ASL        61)
ACPI: APIC 7FED5000, 0068 (r1 DELL    M07     27D70205 ASL        47)
ACPI: MCFG 7FED4FC0, 003E (r16 DELL    M07     27D70205 ASL        61)
ACPI: SLIC 7FED509C, 0176 (r1 DELL    M07     27D70205 ASL        61)
ACPI: BOOT 7FED4BC0, 0028 (r1 DELL    M07     27D70205 ASL        61)
ACPI: SSDT 7FED3A0D, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007fed3000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00007fbed8]    TEXT DATA BSS ==> [0000200000 - 00007fbed8]
  #3 [0037d7d000 - 0037fef498]          RAMDISK ==> [0037d7d000 - 0037fef498]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0007fed3
On node 0 totalpages: 523890
  DMA zone: 56 pages used for memmap
  DMA zone: 1633 pages reserved
  DMA zone: 2310 pages, LIFO batch:0
  DMA32 zone: 7108 pages used for memmap
  DMA32 zone: 512783 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
PERCPU: Allocating 45056 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515093
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev splash=silent,theme:natural_gentoo CONSOLE=/dev/tty1 quiet vga=0x31B video=vesafb:mtrr:3,ywrap
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1997.446 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2054248k/2095948k available (3844k kernel code, 388k absent, 40620k reserved, 1192k data, 380k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3994.89 BogoMIPS (lpj=1997446)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080926
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3994.43 BogoMIPS (lpj=1997219)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 3781248840 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (7989.33 BogoMIPS).
net_namespace: 920 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xefffc000-0xefffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:01:00.0: reg 10 32bit mmio: [0xed000000-0xedffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xee000000-0xeeffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xefe00000-0xefe1ffff]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xed000000-0xefefffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xece00000-0xecffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe01fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xecdfe000-0xecdfffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:01.0: reg 10 32bit mmio: [0xecdfd800-0xecdfdfff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: reg 10 32bit mmio: [0xecdfd400-0xecdfd4ff]
pci 0000:03:01.1: supports D1 D2
pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:03:01.2: reg 10 32bit mmio: [0xecdfd500-0xecdfd5ff]
pci 0000:03:01.2: supports D1 D2
pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.2: PME# disabled
pci 0000:03:01.3: reg 10 32bit mmio: [0xecdfd600-0xecdfd6ff]
pci 0000:03:01.3: supports D1 D2
pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.3: PME# disabled
pci 0000:03:01.4: reg 10 32bit mmio: [0xecdfd700-0xecdfd7ff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xecd00000-0xecdfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: WMI: Mapper loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff has been reserved
system 00:00: iomem range 0xe0000-0xfffff has been reserved
system 00:00: iomem range 0x100000-0x7fed33ff could not be reserved
system 00:00: iomem range 0x7fed3400-0x7fefffff has been reserved
system 00:00: iomem range 0x7ff00000-0x7fffffff has been reserved
system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved
system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved
system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved
system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved
system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved
system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x1080-0x10bf has been reserved
system 00:03: ioport range 0x10c0-0x10df has been reserved
system 00:03: ioport range 0x809-0x809 has been reserved
system 00:08: ioport range 0xc80-0xcff could not be reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0x920-0x92f has been reserved
system 00:08: ioport range 0xcb0-0xcbf has been reserved
system 00:08: ioport range 0x930-0x97f has been reserved
system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xe000-0xefff
pci 0000:00:01.0:   MEM window: 0xed000000-0xefefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
pci 0000:00:1c.3:   MEM window: 0xece00000-0xecffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000e0000000-0x000000e01fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xecd00000-0xecdfffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 io port: [0xe000-0xefff]
bus: 01 index 1 mmio: [0xed000000-0xefefffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 0b index 0 mmio: [0x0-0x0]
bus: 0b index 1 mmio: [0x0-0x0]
bus: 0b index 2 mmio: [0x0-0x0]
bus: 0b index 3 mmio: [0x0-0x0]
bus: 0c index 0 io port: [0xd000-0xdfff]
bus: 0c index 1 mmio: [0xece00000-0xecffffff]
bus: 0c index 2 mmio: [0xe0000000-0xe01fffff]
bus: 0c index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0x0]
bus: 03 index 1 mmio: [0xecd00000-0xecdfffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 2505k freed
Simple Boot Flag at 0x79 set to 0x80
squashfs: version 3.4 (2008/08/26) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/W DEBUG].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Mar  9 2009 19:50:12) installed
msgmni has been set to 4018
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 317 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([e-mail])
intel_rng: FWH not detected
Linux agpgart interface v0.103
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004100000, using 10240k, total 262144k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fbcondecor: console 0 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 0
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
input: Lid Switch as /class/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SBTN]
ACPI: SSDT 7FED4134, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 7FED3EE9, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED4378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 7FED40AF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (26 C)
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:4f:64:2e
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
input: Macintosh mouse button emulation as /class/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata1.00: HPA detected: current 231496650, native 234441648
ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100
ata1.00: 231496650 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
Clocksource tsc unstable (delta = 1893011058 ns)
ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 102C, max UDMA/33
ata2.00: configured for UDMA/33
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 231496650 512-byte hardware sectors: (118 GB/110 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 231496650 512-byte hardware sectors: (118 GB/110 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 102C PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
SSFDC read-only Flash Translation layer
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19)
sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
input: AT Translated Set 2 keyboard as /class/input/input4
mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1)
ricoh-mmc: Controller is now disabled.
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ALSA device list:
  No soundcards found.
netem: version 1.2
u32 classifier
    Performance counters on
    Actions configured 
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
registered taskstats version 1
Freeing unused kernel memory: 380k freed
ata1: soft resetting link
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] 231496650 512-byte hardware sectors: (118 GB/110 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: detected capacity change from 0 to 118526284800
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input5
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2456]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.02.01-k9
Emulex LightPulse Fibre Channel SCSI driver 8.2.8
Copyright(c) 2004-2008 Emulex.  All rights reserved.
ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ecdfd800-ecdfdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
fuse init (API version 7.10)
EXT4-fs: Update your userspace programs to mount using ext4
EXT4-fs: ext4dev backwards compatibility will go away by 2.6.31
UDF-fs: No VRS found
XFS: correcting sb_features alignment problem
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[314fc0001ba2bc50]
XFS mounting filesystem sda5
Ending clean XFS mount for filesystem: sda5
udev: starting version 139
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
acpi device:2f: registered as cooling_device2
input: Video Bus as /class/input/input6
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 5-1: new high speed USB device using ehci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: ignoring external hub
usb 5-7: new high speed USB device using ehci_hcd and address 4
usb 5-7: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
input: Genius Ergo Mouse as /class/input/input7
generic-usb 0003:0458:005C.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Ergo Mouse] on usb-0000:00:1d.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.37  Fri Mar  6 00:32:38 PST 2009
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
EXT2-fs warning (device sda2): ext2_fill_super: mounting ext3 filesystem as ext2
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
XFS mounting filesystem sda8
Ending clean XFS mount for filesystem: sda8
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     FUJITSU  HandyDrive300    0201 PQ: 0 ANSI: 0
sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
Adding 2104504k swap on /dev/sda3.  Priority:-1 extents:1 across:2104504k
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
fbcondecor: console 1 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 5
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
ReiserFS: sdb2: using ordered data mode
ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb2: checking transaction log (sdb2)
ReiserFS: sdb2: Using r5 hash to sort names