here a complete dmesg

dmesg (text/plain), 30.15 KB, created by Alexander Haensch on 2009-03-08 12:41:48 UTC

 pIII_sse  :  5980.000 MB/sec
xor: using function: pIII_sse (5980.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:0a.1 reg 20 io port: [4c00, 4c3f]
PCI: 0000:00:0a.1 reg 24 io port: [4c40, 4c7f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
PCI: 0000:00:0b.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
PCI: 0000:00:0b.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
pci 0000:00:0b.1: supports D1
pci 0000:00:0b.1: supports D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
PCI: 0000:00:0d.0 reg 20 io port: [f400, f40f]
PCI: 0000:00:0e.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:0e.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:0e.0 reg 18 io port: [970, 977]
PCI: 0000:00:0e.0 reg 1c io port: [b70, b73]
PCI: 0000:00:0e.0 reg 20 io port: [e000, e00f]
PCI: 0000:00:0e.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
PCI: 0000:00:0f.0 reg 10 io port: [9e0, 9e7]
PCI: 0000:00:0f.0 reg 14 io port: [be0, be3]
PCI: 0000:00:0f.0 reg 18 io port: [960, 967]
PCI: 0000:00:0f.0 reg 1c io port: [b60, b63]
PCI: 0000:00:0f.0 reg 20 io port: [cc00, cc0f]
PCI: 0000:00:0f.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
PCI: 0000:00:10.1 reg 10 32bit mmio: [fe024000, fe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
PCI: 0000:00:14.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
PCI: 0000:00:14.0 reg 14 io port: [c800, c807]
pci 0000:00:14.0: supports D1
pci 0000:00:14.0: supports D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
PCI: bridge 0000:00:02.0 io port: [a000, afff]
PCI: bridge 0000:00:02.0 32bit mmio: [fdd00000, fddfffff]
PCI: bridge 0000:00:02.0 64bit mmio pref: [fda00000, fdafffff]
PCI: bridge 0000:00:03.0 io port: [8000, 8fff]
PCI: bridge 0000:00:03.0 32bit mmio: [fd900000, fd9fffff]
PCI: bridge 0000:00:03.0 64bit mmio pref: [fde00000, fdefffff]
PCI: 0000:03:00.0 reg 10 32bit mmio: [fa000000, faffffff]
PCI: 0000:03:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:03:00.0 reg 1c 64bit mmio: [f8000000, f9ffffff]
PCI: 0000:03:00.0 reg 24 io port: [bc00, bc7f]
PCI: 0000:03:00.0 reg 30 32bit mmio: [fbf80000, fbffffff]
PCI: bridge 0000:00:04.0 io port: [b000, bfff]
PCI: bridge 0000:00:04.0 32bit mmio: [f8000000, fbffffff]
PCI: bridge 0000:00:04.0 64bit mmio pref: [d0000000, dfffffff]
pci 0000:00:10.0: transparent bridge
PCI: bridge 0000:00:10.0 io port: [9000, 9fff]
PCI: bridge 0000:00:10.0 32bit mmio: [fdc00000, fdcfffff]
PCI: bridge 0000:00:10.0 32bit mmio pref: [fdb00000, fdbfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
dca service started, version 1.4
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:01: ioport range 0x2000-0x207f has been reserved
system 00:01: ioport range 0x2080-0x20ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfefff0ff could not be reserved
system 00:0b: iomem range 0xbfef0000-0xbfefffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0xbfeeffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: 0xa000-0xafff
pci 0000:00:02.0:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:02.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0:   IO window: 0x8000-0x8fff
pci 0000:00:03.0:   MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:03.0:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
pci 0000:00:04.0:   IO window: 0xb000-0xbfff
pci 0000:00:04.0:   MEM window: 0xf8000000-0xfbffffff
pci 0000:00:04.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
pci 0000:00:10.0:   IO window: 0x9000-0x9fff
pci 0000:00:10.0:   MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:10.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [a000, afff]
bus: 01 index 1 mmio: [fdd00000, fddfffff]
bus: 01 index 2 mmio: [fda00000, fdafffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [8000, 8fff]
bus: 02 index 1 mmio: [fd900000, fd9fffff]
bus: 02 index 2 mmio: [fde00000, fdefffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [b000, bfff]
bus: 03 index 1 mmio: [f8000000, fbffffff]
bus: 03 index 2 mmio: [d0000000, dfffffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [9000, 9fff]
bus: 04 index 1 mmio: [fdc00000, fdcfffff]
bus: 04 index 2 mmio: [fdb00000, fdbfffff]
bus: 04 index 3 io port: [0, ffff]
bus: 04 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 11868k freed
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
audit: initializing netlink socket (disabled)
type=2000 audit(1236505041.206:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
msgmni has been set to 1730
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:02.0: Enabling HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:04.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
pci 0000:03:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: found MSI capability
pci_express 0000:00:03.0:pcie00: allocate port service
pci_express 0000:00:03.0:pcie03: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie03: allocate port service
hpet_resources: 0xfefff000 is busy
Linux agpgart interface v0.103
vesafb: framebuffer at 0xf9000000, mapped to 0xf8880000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:c130
vesafb: pmi: set display start = c00cc193, set palette = c00cc1ee
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Loading iSCSI transport class v2.0-870.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
pata_amd 0000:00:0d.0: version 0.3.10
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
ata1.00: ATA-5: ST380021A, 3.05, max UDMA/100
ata1.00: 156301488 sectors, multi 1: LBA 
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST380021A        3.05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    937 MB/s
raid6: int32x2    839 MB/s
raid6: int32x4    718 MB/s
raid6: int32x8    550 MB/s
raid6: mmxx1     1632 MB/s
raid6: mmxx2     3000 MB/s
raid6: sse1x1    1648 MB/s
raid6: sse1x2    2804 MB/s
raid6: sse2x1    2843 MB/s
raid6: sse2x2    3746 MB/s
raid6: using algorithm sse2x2 (3746 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 320k freed
ata1: soft resetting link
ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: PS2++ Logitech MX Mouse as /class/input/input2
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
sata_nv 0000:00:0e.0: PCI INT A -> Link[LSID] -> GSI 5 (level, low) -> IRQ 5
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 5
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 5
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
ata3.00: 234441648 sectors, multi 1: LBA48 
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3500630AS, 3.AAC, max UDMA/133
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST3120026AS      3.05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 < sdb5 > sdb2 sdb3 sdb4
sd 2:0:0:0: [sdb] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3 sdc4
sd 3:0:0:0: [sdc] Attached SCSI disk
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
sata_nv 0000:00:0f.0: PCI INT A -> Link[LFID] -> GSI 5 (level, low) -> IRQ 5
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 5
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 5
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223F  SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sr 4:0:0:0: Attached scsi generic sg3 type 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 11, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUBA] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 10, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
input: PC Speaker as /class/input/input5
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:cb:4c:be
forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
udev: renamed network interface eth0 to eth2
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 7 (level, low) -> IRQ 7
HDA Intel 0000:00:10.1: setting latency timer to 64
chipset global capabilities = 0x4401
codec_mask = 0x1
hda_codec: model '3stack' is selected for config 1043:81cb (ASUS M2N)
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
Cannot find slave Side Playback Volume, skipped
Cannot find slave Speaker Playback Volume, skipped
Cannot find slave IEC958 Playback Volume, skipped
Cannot find slave Side Playback Switch, skipped
Cannot find slave Speaker Playback Switch, skipped
nvidia: module license 'NVIDIA' taints kernel.
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
nvidia 0000:03:00.0: PCI INT A -> Link[LNK5] -> GSI 5 (level, low) -> IRQ 5
nvidia 0000:03:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.35  Sun Feb 22 20:26:14 PST 2009
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, hpet irqs
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb4, internal journal
ReiserFS: sdc3: found reiserfs format "3.6" with standard journal
ReiserFS: sdc3: using ordered data mode
ReiserFS: sdc3: journal params: device sdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdc3: checking transaction log (sdc3)
ReiserFS: sdc3: Using r5 hash to sort names
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdc4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
XFS mounting filesystem sdc2
Ending clean XFS mount for filesystem: sdc2
XFS mounting filesystem sdb5
Ending clean XFS mount for filesystem: sdb5
ReiserFS: sdc1: found reiserfs format "3.6" with standard journal
ReiserFS: sdc1: using ordered data mode
ReiserFS: sdc1: journal params: device sdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdc1: checking transaction log (sdc1)
ReiserFS: sdc1: Using r5 hash to sort names
hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x005b8000
Adding 987988k swap on /dev/sdb2.  Priority:-1 extents:1 across:987988k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
eth2: no IPv6 routers present
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
hda_codec_cleanup_stream: NID=0x2
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
irq 7: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: P          2.6.27-gentoo-r8 #2
 [<c04058a8>] ? printk+0x18/0x20
 [<c0167017>] __report_bad_irq+0x27/0x90
 [<c04085af>] ? _spin_unlock+0xf/0x30
 [<c01672c7>] note_interrupt+0x247/0x280
 [<c01665a1>] ? handle_IRQ_event+0x31/0x60
 [<c0167ac3>] handle_level_irq+0xc3/0xf0
 [<c0167a00>] ? handle_level_irq+0x0/0xf0
 [<c01062ea>] do_IRQ+0x8a/0xe0
 [<c012bdd8>] ? irq_exit+0x28/0x50
 [<c010476b>] common_interrupt+0x23/0x28
 [<c0109d7a>] ? default_idle+0x4a/0x50
 [<c0109e70>] c1e_idle+0x30/0xf0
 [<c0102c95>] cpu_idle+0x95/0x120
 [<c040338b>] start_secondary+0x156/0x1cb
 =======================
handlers:
[<f92537a0>] (azx_interrupt+0x0/0x130 [snd_hda_intel])
Disabling IRQ #7
HDA Intel 0000:00:10.1: PCI INT B disabled
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 7 (level, low) -> IRQ 7
HDA Intel 0000:00:10.1: setting latency timer to 64
chipset global capabilities = 0x4401
codec_mask = 0x1
hda_codec: model '3stack' is selected for config 1043:81cb (ASUS M2N)
Cannot find slave Side Playback Volume, skipped
Cannot find slave Speaker Playback Volume, skipped
Cannot find slave IEC958 Playback Volume, skipped
Cannot find slave Side Playback Switch, skipped
Cannot find slave Speaker Playback Switch, skipped
hda_codec_cleanup_stream: NID=0x2
hda_codec_cleanup_stream: NID=0x2
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
firefox[7279]: segfault at b78f3e20 ip b7c60d11 sp bf9ff1e4 error 4 in libc-2.9.so[b7c34000+13d000]
hda_codec_cleanup_stream: NID=0x3
hda_codec_cleanup_stream: NID=0x3
hda_codec_cleanup_stream: NID=0x6
hda_codec_cleanup_stream: NID=0x6
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0x10000, format=0x4011
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
azx_pcm_prepare: bufsize=0x10000, format=0x4011
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
azx_pcm_prepare: bufsize=0x10000, format=0x4011
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
hda_codec_cleanup_stream: NID=0x3
hda_codec_cleanup_stream: NID=0x3
azx_pcm_prepare: bufsize=0xac80, format=0x4111
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4111
azx_pcm_prepare: bufsize=0xac80, format=0x4111
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4111
azx_pcm_prepare: bufsize=0xac80, format=0x4111
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4111
hda_codec_cleanup_stream: NID=0x3
hda_codec_cleanup_stream: NID=0x3
hda_codec_cleanup_stream: NID=0x6
irq 7: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: P          2.6.27-gentoo-r8 #2
 [<c04058a8>] ? printk+0x18/0x20
 [<c0167017>] __report_bad_irq+0x27/0x90
 [<c04085af>] ? _spin_unlock+0xf/0x30
 [<c01672c7>] note_interrupt+0x247/0x280
 [<c01665a1>] ? handle_IRQ_event+0x31/0x60
 [<c0167ac3>] handle_level_irq+0xc3/0xf0
 [<c0167a00>] ? handle_level_irq+0x0/0xf0
 [<c01062ea>] do_IRQ+0x8a/0xe0
 [<c012bdd8>] ? irq_exit+0x28/0x50
 [<c010476b>] common_interrupt+0x23/0x28
 [<c0109d7a>] ? default_idle+0x4a/0x50
 [<c0109e70>] c1e_idle+0x30/0xf0
 [<c0102c95>] cpu_idle+0x95/0x120
 [<c040338b>] start_secondary+0x156/0x1cb
 =======================
handlers:
[<f925f7a0>] (azx_interrupt+0x0/0x130 [snd_hda_intel])
Disabling IRQ #7
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3
HDA Intel 0000:00:10.1: PCI INT B disabled
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 7 (level, low) -> IRQ 7
HDA Intel 0000:00:10.1: setting latency timer to 64
chipset global capabilities = 0x4401
codec_mask = 0x1
hda_codec: model '3stack' is selected for config 1043:81cb (ASUS M2N)
Cannot find slave Side Playback Volume, skipped
Cannot find slave Speaker Playback Volume, skipped
Cannot find slave IEC958 Playback Volume, skipped
Cannot find slave Side Playback Switch, skipped
Cannot find slave Speaker Playback Switch, skipped
hda_codec_cleanup_stream: NID=0x2
hda_codec_cleanup_stream: NID=0x2
irq 7: nobody cared (try booting with the "irqpoll" option)
Pid: 24957, comm: cc1 Tainted: P          2.6.27-gentoo-r8 #2
 [<c04058a8>] ? printk+0x18/0x20
 [<c0167017>] __report_bad_irq+0x27/0x90
 [<c04085af>] ? _spin_unlock+0xf/0x30
 [<c01672c7>] note_interrupt+0x247/0x280
 [<c01665a1>] ? handle_IRQ_event+0x31/0x60
 [<c0167ac3>] handle_level_irq+0xc3/0xf0
 [<c0167a00>] ? handle_level_irq+0x0/0xf0
 [<c01062ea>] do_IRQ+0x8a/0xe0
 [<c012bdd8>] ? irq_exit+0x28/0x50
 [<c010476b>] common_interrupt+0x23/0x28
 =======================
handlers:
[<f925f7a0>] (azx_interrupt+0x0/0x130 [snd_hda_intel])
Disabling IRQ #7
hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f000a
azx_pcm_prepare: bufsize=0x10000, format=0x31
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda_codec_cleanup_stream: NID=0x3