dmesg output for kernel 2.6.28-r1

dmesg-2.6.28-r1 (text/plain), 25.87 KB, created by Jeremy Murphy on 2009-02-27 01:01:55 UTC

BIOS EBDA/lowmem at: 0009fc00/0009fc00
Linux version 2.6.28-gentoo-r1 (root@nx8220) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #3 Tue Feb 3 19:17:42 EST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005ffd0000 (usable)
 BIOS-e820: 000000005ffd0000 - 000000005ffefc00 (reserved)
 BIOS-e820: 000000005ffefc00 - 000000005fffb000 (ACPI NVS)
 BIOS-e820: 000000005fffb000 - 0000000060000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x5ffd0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 377fe000 @ 7000-d000
ACPI: RSDP 000F6EF0, 0014 (r0 HP    )
ACPI: RSDT 5FFEFC84, 0034 (r1 HP     0934     18080620 HP          1)
ACPI: FACP 5FFEFC00, 0084 (r2 HP     0934            2 HP          1)
ACPI: DSDT 5FFEFD50, 84E7 (r1 HP       nc8200    10000 MSFT  100000E)
ACPI: FACS 5FFFAE80, 0040
ACPI: APIC 5FFEFCB8, 005A (r1 HP     0934            1 HP          1)
ACPI: MCFG 5FFEFD14, 003C (r1 HP     0934            1 HP          1)
ACPI: SSDT 5FFF8237, 0371 (r1 HP       HPQPpc     1001 MSFT  100000E)
ACPI: Local APIC address 0xfec01000
647MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00009000 - 0000ff00
(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000100000 - 00006b69a8]    TEXT DATA BSS ==> [0000100000 - 00006b69a8]
  #2 [00006b7000 - 00006ba000]    INIT_PG_TABLE ==> [00006b7000 - 00006ba000]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #5 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0005ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0005ffd0
On node 0 totalpages: 393071
free_area_init_node: node 0, pgdat c0537ca0, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 1296 pages used for memmap
  HighMem zone: 164546 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfec01000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389999
Kernel command line: root=/dev/hda3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1862.025 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1552372k/1572672k available (3167k kernel code, 18988k reserved, 1185k data, 260k init, 663368k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffac000 - 0xfffff000   ( 332 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0544000 - 0xc0585000   ( 260 kB)
      .data : 0xc0417efd - 0xc05404dc   (1185 kB)
      .text : 0xc0100000 - 0xc0417efd   (3167 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.05 BogoMIPS (lpj=1862025)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
net_namespace: 484 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C003] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3000-0x301f]
pci 0000:00:1d.1: reg 20 io port: [0x3020-0x303f]
pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xc8c00000-0xc8c003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10 io port: [0x3100-0x31ff]
pci 0000:00:1e.2: reg 14 io port: [0x3200-0x323f]
pci 0000:00:1e.2: reg 18 32bit mmio: [0xc8c01000-0xc8c011ff]
pci 0000:00:1e.2: reg 1c 32bit mmio: [0xc8c02000-0xc8c020ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1e.3: reg 10 io port: [0x3400-0x34ff]
pci 0000:00:1e.3: reg 14 io port: [0x3500-0x357f]
pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x3580-0x358f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xc7ffffff]
pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xc8800000-0xc880ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xc8800000-0xc8bfffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xc7ffffff]
pci 0000:10:00.0: reg 10 64bit mmio: [0xc8000000-0xc800ffff]
pci 0000:10:00.0: PME# supported from D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xc8000000-0xc83fffff]
pci 0000:02:04.0: reg 10 32bit mmio: [0xc8400000-0xc8400fff]
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:06.0: reg 10 32bit mmio: [0xc8401000-0xc8401fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:02:06.2: reg 10 32bit mmio: [0xc8402000-0xc84027ff]
pci 0000:02:06.2: reg 14 32bit mmio: [0xc8404000-0xc8407fff]
pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.2: PME# disabled
pci 0000:02:06.3: reg 10 32bit mmio: [0xc8408000-0xc8409fff]
pci 0000:02:06.3: supports D1 D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.3: PME# disabled
pci 0000:02:06.4: reg 10 32bit mmio: [0xc840a000-0xc840a0ff]
pci 0000:02:06.4: reg 14 32bit mmio: [0xc840b000-0xc840b0ff]
pci 0000:02:06.4: reg 18 32bit mmio: [0xc840c000-0xc840c0ff]
pci 0000:02:06.4: supports D1 D2
pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.4: PME# disabled
pci 0000:02:06.5: reg 10 32bit mmio: [0xc840d000-0xc840dfff]
pci 0000:02:06.5: reg 14 32bit mmio: [0xc840e000-0xc840efff]
pci 0000:02:06.5: reg 18 32bit mmio: [0xc840f000-0xc840ffff]
pci 0000:02:06.5: reg 1c 32bit mmio: [0xc8410000-0xc8410fff]
pci 0000:02:06.5: supports D1 D2
pci 0000:02:06.5: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xc8400000-0xc87fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C054._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C069._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0CE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0DE._PRT]
ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11)
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080926]
ACPI: Power Resource [C1D0] (on)
ACPI: Power Resource [C1B2] (on)
ACPI: Power Resource [C1B9] (on)
ACPI: Power Resource [C1C9] (on)
ACPI: Power Resource [C251] (off)
ACPI: Power Resource [C252] (off)
ACPI: Power Resource [C253] (off)
ACPI: Power Resource [C254] (off)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
system 00:0a: ioport range 0x500-0x57f has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0x1000-0x107f has been reserved
system 00:0b: ioport range 0x1100-0x113f has been reserved
system 00:0b: ioport range 0x1200-0x121f has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec000ff has been reserved
system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xfed90000-0xfed9afff has been reserved
system 00:0c: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:0c: iomem range 0xfec01000-0xfec01fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xc8800000-0xc8bfffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000c7ffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xc8000000-0xc83fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:20
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: disabled
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0:   IO window: 0x004000-0x0040ff
pci 0000:02:06.0:   IO window: 0x004400-0x0044ff
pci 0000:02:06.0:   PREFETCH window: 0x68000000-0x6bffffff
pci 0000:02:06.0:   MEM window: 0x6c000000-0x6fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x4000-0x4fff
pci 0000:00:1e.0:   MEM window: 0xc8400000-0xc87fffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000068000000-0x0000006bffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0x2000-0x2fff]
bus: 01 index 1 mmio: [0xc8800000-0xc8bfffff]
bus: 01 index 2 mmio: [0xc0000000-0xc7ffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 10 index 0 mmio: [0x0-0x0]
bus: 10 index 1 mmio: [0xc8000000-0xc83fffff]
bus: 10 index 2 mmio: [0x0-0x0]
bus: 10 index 3 mmio: [0x0-0x0]
bus: 20 index 0 mmio: [0x0-0x0]
bus: 20 index 1 mmio: [0x0-0x0]
bus: 20 index 2 mmio: [0x0-0x0]
bus: 20 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0x4000-0x4fff]
bus: 02 index 1 mmio: [0xc8400000-0xc87fffff]
bus: 02 index 2 mmio: [0x68000000-0x6bffffff]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffff]
bus: 03 index 0 io port: [0x4000-0x40ff]
bus: 03 index 1 io port: [0x4400-0x44ff]
bus: 03 index 2 mmio: [0x68000000-0x6bffffff]
bus: 03 index 3 mmio: [0x6c000000-0x6fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
highmem bounce pool size: 64 pages
msgmni has been set to 1738
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 287 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 286 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 285 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
intel_rng: FWH not detected
Linux agpgart interface v0.103
ACPI: AC Adapter [C176] (on-line)
ACPI: Battery Slot [C178] (battery present)
ACPI: Battery Slot [C177] (battery absent)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [C1F2]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [C1F3]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [C255] (off)
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [C256] (off)
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [C257] (off)
fan PNP0C0B:03: registered as cooling_device3
ACPI: Fan [C258] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device4
ACPI: Processor [C001] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ1] (63 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ2] (47 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ3] (32 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ4] (40 C)
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3580-0x3587
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hda: FUJITSU MHV2060AH, ATA DISK drive
hdb: MATSHITADVD-RAM UJ-832S, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
ide-cd driver 5.00
ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
firewire_ohci 0000:02:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8c00000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:C1C6,PNP0f13:C1C7] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
EDAC MC: Ver: 2.1.0 Jan 31 2009
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
Intel ICH 0000:00:1e.2: power state changed by ACPI to D0
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Intel ICH 0000:00:1e.2: setting latency timer to 64
Marking TSC unstable due to TSC halts in idle
input: AT Translated Set 2 keyboard as /class/input/input3
Clocksource tsc unstable (delta = -351845742 ns)
firewire_core: created device fw0: GUID a55a435100508b71, S400
usb 3-2: new full speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
usb 3-2: configuration #1 chosen from 1 choice
input: SynPS/2 Synaptics TouchPad as /class/input/input4
intel8x0_measure_ac97_clock: measured 50549 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel ICH6 with AD1981B at irq 21
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 260k freed
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
input: PC Speaker as /class/input/input5
tg3.c:v3.94 (August 14, 2008)
tg3 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:10:00.0: setting latency timer to 64
[fglrx] Maximum main memory to use for locked dma buffers: 1412 MBytes.
[fglrx]   vendor: 1002 device: 3150 count: 1
[fglrx] ioport: bar 1, base 0x2000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Driver built-in PAT support is enabled successfully
[fglrx] module loaded - fglrx 8.57.2 [Jan 14 2009] with 1 minors
ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
tifm_7xx1 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
eth1: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:60:b0:90:29
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0934]
yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:06.0: TI: mfunc 0x01111b22, devctl 0x64
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
yenta_cardbus 0000:02:06.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff
EXT3 FS on hda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1465120k swap on /dev/hda2.  Priority:-1 extents:1 across:1465120k
ADDRCONF(NETDEV_UP): eth1: link is not ready
[fglrx] Firegl kernel thread PID: 2119
[fglrx] Gart USWC size:694 M.
[fglrx] Gart cacheable size:60 M.
[fglrx] Reserved FB block: Shared offset:0, size:40000 
[fglrx] Reserved FB block: Unshared offset:3f2c000, size:c2000 
[fglrx] Reserved FB block: Unshared offset:3fee000, size:1000 
[fglrx] Reserved FB block: Unshared offset:3fef000, size:1000 
[fglrx] Reserved FB block: Unshared offset:3ff0000, size:10000 
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
eth0: no IPv6 routers present
[fglrx] It's not necessary to adjust system aperture on this ASIC 
[fglrx] It's not necessary to adjust system aperture on this ASIC 
[fglrx] Firegl kernel thread PID: 12710
[fglrx] Gart USWC size:694 M.
[fglrx] Gart cacheable size:60 M.
[fglrx] Reserved FB block: Shared offset:0, size:40000 
[fglrx] Reserved FB block: Unshared offset:3f2c000, size:c2000 
[fglrx] Reserved FB block: Unshared offset:3fee000, size:1000 
[fglrx] Reserved FB block: Unshared offset:3fef000, size:1000 
[fglrx] Reserved FB block: Unshared offset:3ff0000, size:10000 
[fglrx] It's not necessary to adjust system aperture on this ASIC