dmesg after startx failure.

dmesg.txt (text/plain), 113.91 KB, created by Charles Price on 2009-02-14 21:39:44 UTC

BIOS EBDA/lowmem at: 0009f800/0009f800                                                                   
Linux version 2.6.28-gentoo-r1 (root@flint) (gcc version 4.1.2 (Gentoo 4.1.2 p1.3)) #6 SMP PREEMPT Sat Feb 14 19:52:08 GMT 2009
Command line: root=/dev/sda4                                                                                                   
KERNEL supported cpus:                                                                                                         
  Intel GenuineIntel                                                                                                           
  AMD AuthenticAMD                                                                                                             
  Centaur CentaurHauls                                                                                                         
BIOS-provided physical RAM map:                                                                                                
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)                                                                       
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)                                                                     
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)                                                                     
 BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)                                                                       
 BIOS-e820: 00000000cfeb0000 - 00000000cfee3000 (ACPI NVS)                                                                     
 BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)                                                                    
 BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)                                                                     
 BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)                                                                     
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)                                                                     
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)                                                                       
DMI 2.4 present.                                                                                                               
last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff                                                                                 
last_pfn = 0xcfeb0 max_arch_pfn = 0x3ffffffff                                                                                  
init_memory_mapping: 0000000000000000-00000000cfeb0000                                                                         
 0000000000 - 00cfe00000 page 2M                                                                                               
 00cfe00000 - 00cfeb0000 page 4k                                                                                               
kernel direct mapping tables up to cfeb0000 @ 8000-e000                                                                        
last_map_addr: cfeb0000 end: cfeb0000                                                                                          
init_memory_mapping: 0000000100000000-0000000130000000                                                                         
 0100000000 - 0130000000 page 2M                                                                                               
kernel direct mapping tables up to 130000000 @ c000-12000                                                                      
last_map_addr: 130000000 end: 130000000                                                                                        
ACPI: RSDP 000F7520, 0014 (r0 GBT   )                                                                                          
ACPI: RSDT CFEE3040, 0034 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)                                                          
ACPI: FACP CFEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)                                                          
ACPI: DSDT CFEE3180, 3BBF (r1 GBT    GBTUACPI     1000 MSFT  100000C)                                                          
ACPI: FACS CFEB0000, 0040                                                                                                      
ACPI: HPET CFEE6E80, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)                                                          
ACPI: MCFG CFEE6F00, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)                                                          
ACPI: APIC CFEE6D80, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)                                                          
ACPI: Local APIC address 0xfee00000                                                                                            
(6 early reservations) ==> bootmem [0000000000 - 0130000000]                                                                   
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]                                                  
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]                                                  
  #2 [0001000000 - 0001757010]    TEXT DATA BSS ==> [0001000000 - 0001757010]                                                  
  #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]                                                  
  #4 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]                                                  
  #5 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]                                                  
 [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0                                      
Zone PFN ranges:                                                                                                               
  DMA      0x00000000 -> 0x00001000                                                                                            
  DMA32    0x00001000 -> 0x00100000                                                                                            
  Normal   0x00100000 -> 0x00130000                                                                                            
Movable zone start PFN for each node                                                                                           
early_node_map[3] active PFN ranges                                                                                            
    0: 0x00000000 -> 0x0000009f                                                                                                
    0: 0x00000100 -> 0x000cfeb0                                                                                                
    0: 0x00100000 -> 0x00130000                                                                                                
On node 0 totalpages: 1048143                                                                                                  
  DMA zone: 56 pages used for memmap                                                                                           
  DMA zone: 104 pages reserved                                                                                                 
  DMA zone: 3839 pages, LIFO batch:0                                                                                           
  DMA32 zone: 14280 pages used for memmap                                                                                      
  DMA32 zone: 833256 pages, LIFO batch:31                                                                                      
  Normal zone: 2688 pages used for memmap                                                                                      
  Normal zone: 193920 pages, LIFO batch:31                                                                                     
  Movable zone: 0 pages used for memmap                                                                                        
ACPI: PM-Timer IO Port: 0x408                                                                                                  
ACPI: Local APIC address 0xfee00000                                                                                            
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)                                                                             
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)                                                                             
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)                                                                             
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)                                                                             
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])                                                                              
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])                                                                              
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])                                                                              
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])                                                                              
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])                                                                        
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23                                                                  
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)                                                                       
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)                                                                    
ACPI: IRQ0 used by override.                                                                                                   
ACPI: IRQ2 used by override.                                                                                                   
ACPI: IRQ9 used by override.                                                                                                   
ACPI: HPET id: 0x8086a201 base: 0xfed00000                                                                                     
SMP: Allowing 4 CPUs, 0 hotplug CPUs                                                                                           
Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)                                                         
PERCPU: Allocating 49152 bytes of per cpu data                                                                                 
NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1                                                                                       
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031015                                                   
Kernel command line: root=/dev/sda4                                                                                            
Initializing CPU#0                                                                                                             
PID hash table entries: 4096 (order: 12, 32768 bytes)                                                                          
Fast TSC calibration using PIT                                                                                                 
Detected 3399.756 MHz processor.                                                                                               
Console: colour VGA+ 80x25                                                                                                     
console [tty0] enabled                                                                                                         
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)                                                             
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)                                                               
Checking aperture...                                                                                                           
No AGP bridge found                                                                                                            
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)                                                                      
Placing software IO TLB between 0x20000000 - 0x24000000                                                                        
Memory: 4041944k/4980736k available (4545k kernel code, 788164k absent, 149724k reserved, 2014k data, 348k init)               
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1                                                        
hpet clockevent registered                                                                                                     
HPET: 4 timers in total, 0 timers will be used for per-cpu timer                                                               
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.51 BogoMIPS (lpj=3399756)                      
Mount-cache hash table entries: 256                                                                                            
CPU: L1 I cache: 32K, L1 D cache: 32K                                                                                          
CPU: L2 cache: 6144K                                                                                                           
CPU: Physical Processor ID: 0                                                                                                  
CPU: Processor Core ID: 0                                                                                                      
CPU0: Thermal monitoring enabled (TM2)                                                                                         
using mwait in idle threads.                                                                                                   
ACPI: Core revision 20080926                                                                                                   
Setting APIC routing to flat                                                                                                   
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1                                                                           
CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07                                                              
Booting processor 1 APIC 0x1 ip 0x6000                                                                                         
Initializing CPU#1                                                                                                             
Calibrating delay using timer specific routine.. 6800.03 BogoMIPS (lpj=3400015)                                                
CPU: L1 I cache: 32K, L1 D cache: 32K                                                                                          
CPU: L2 cache: 6144K                                                                                                           
CPU: Physical Processor ID: 0                                                                                                  
CPU: Processor Core ID: 1                                                                                                      
CPU1: Thermal monitoring enabled (TM2)                                                                                         
CPU1: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07                                                              
checking TSC synchronization [CPU#0 -> CPU#1]: passed.                                                                         
Booting processor 2 APIC 0x3 ip 0x6000                                                                                         
Initializing CPU#2                                                                                                             
Calibrating delay using timer specific routine.. 6800.05 BogoMIPS (lpj=3400027)                                                
CPU: L1 I cache: 32K, L1 D cache: 32K                                                                                          
CPU: L2 cache: 6144K                                                                                                           
CPU: Physical Processor ID: 0                                                                                                  
CPU: Processor Core ID: 3                                                                                                      
CPU2: Thermal monitoring enabled (TM2)                                                                                         
CPU2: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07                                                              
checking TSC synchronization [CPU#0 -> CPU#2]: passed.                                                                         
Booting processor 3 APIC 0x2 ip 0x6000                                                                                         
Initializing CPU#3                                                                                                             
Calibrating delay using timer specific routine.. 6800.05 BogoMIPS (lpj=3400028)                                                
CPU: L1 I cache: 32K, L1 D cache: 32K                                                                                          
CPU: L2 cache: 6144K                                                                                                           
CPU: Physical Processor ID: 0                                                                                                  
CPU: Processor Core ID: 2                                                                                                      
CPU3: Thermal monitoring enabled (TM2)                                                                                         
CPU3: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07                                                              
checking TSC synchronization [CPU#0 -> CPU#3]: passed.                                                                         
Brought up 4 CPUs                                                                                                              
Total of 4 processors activated (27199.65 BogoMIPS).                                                                           
net_namespace: 1272 bytes                                                                                                      
NET: Registered protocol family 16                                                                                             
ACPI: bus type pci registered                                                                                                  
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63                                                                
PCI: MCFG area at e0000000 reserved in E820                                                                                    
PCI: Using MMCONFIG at e0000000 - e3ffffff                                                                                     
PCI: Using configuration type 1 for base access                                                                                
ACPI: EC: Look up EC in DSDT                                                                                                   
ACPI: Interpreter enabled                                                                                                      
ACPI: (supports S0 S5)                                                                                                         
ACPI: Using IOAPIC for interrupt routing                                                                                       
ACPI: No dock devices found.                                                                                                   
ACPI: PCI Root Bridge [PCI0] (0000:00)                                                                                         
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold                                                                          
pci 0000:00:01.0: PME# disabled                                                                                                
pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]                                                                              
pci 0000:00:1a.1: reg 20 io port: [0xe100-0xe11f]                                                                              
pci 0000:00:1a.2: reg 20 io port: [0xe500-0xe51f]                                                                              
pci 0000:00:1a.7: reg 10 32bit mmio: [0xe8305000-0xe83053ff]                                                                   
pci 0000:00:1b.0: reg 10 64bit mmio: [0xe8300000-0xe8303fff]                                                                   
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold                                                                          
pci 0000:00:1b.0: PME# disabled                                                                                                
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold                                                                          
pci 0000:00:1c.0: PME# disabled                                                                                                
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold                                                                          
pci 0000:00:1c.4: PME# disabled                                                                                                
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold                                                                          
pci 0000:00:1c.5: PME# disabled                                                                                                
pci 0000:00:1d.0: reg 20 io port: [0xe200-0xe21f]                                                                              
pci 0000:00:1d.1: reg 20 io port: [0xe300-0xe31f]                                                                              
pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]                                                                              
pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8304000-0xe83043ff]                                                                   
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]                                                                                  
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]                                                                                  
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]                                                                                  
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]                                                                                  
pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]                                                                              
pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f]                                                                              
pci 0000:00:1f.3: reg 10 64bit mmio: [0xe8306000-0xe83060ff]                                                                   
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]                                                                                
pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707]                                                                              
pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803]                                                                              
pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907]                                                                              
pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03]                                                                              
pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f]                                                                              
pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]                                                                              
pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]                                                                   
pci 0000:01:00.0: reg 18 64bit mmio: [0xe5000000-0xe500ffff]                                                                   
pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff]                                                                              
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]                                                                       
pci 0000:01:00.0: supports D1 D2                                                                                               
pci 0000:01:00.1: reg 10 64bit mmio: [0xe5010000-0xe5013fff]                                                                   
pci 0000:01:00.1: supports D1 D2                                                                                               
pci 0000:00:01.0: bridge io port: [0xa000-0xafff]                                                                              
pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff]                                                                   
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]                                                              
pci 0000:03:00.0: reg 10 io port: [0xb000-0xb0ff]                                                                              
pci 0000:03:00.0: reg 18 64bit mmio: [0xe8010000-0xe8010fff]                                                                   
pci 0000:03:00.0: reg 20 64bit mmio: [0xe8000000-0xe800ffff]                                                                   
pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]                                                                       
pci 0000:03:00.0: supports D1 D2                                                                                               
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                    
pci 0000:03:00.0: PME# disabled                                                                                                
pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]                                                                              
pci 0000:00:1c.4: bridge 32bit mmio: [0xe6000000-0xe6ffffff]                                                                   
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xe8000000-0xe80fffff]                                                              
pci 0000:04:00.0: reg 10 io port: [0xc000-0xc0ff]                                                                              
pci 0000:04:00.0: reg 18 64bit mmio: [0xe8110000-0xe8110fff]                                                                   
pci 0000:04:00.0: reg 20 64bit mmio: [0xe8100000-0xe810ffff]                                                                   
pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]                                                                       
pci 0000:04:00.0: supports D1 D2                                                                                               
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                    
pci 0000:04:00.0: PME# disabled                                                                                                
pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]                                                                              
pci 0000:00:1c.5: bridge 32bit mmio: [0xe7000000-0xe7ffffff]                                                                   
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe8100000-0xe81fffff]                                                              
pci 0000:05:06.0: reg 10 32bit mmio: [0xe8204000-0xe82047ff]                                                                   
pci 0000:05:06.0: reg 14 32bit mmio: [0xe8200000-0xe8203fff]                                                                   
pci 0000:05:06.0: supports D1 D2                                                                                               
pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot                                                                           
pci 0000:05:06.0: PME# disabled                                                                                                
pci 0000:05:07.0: reg 10 io port: [0xd000-0xd007]                                                                              
pci 0000:05:07.0: reg 14 io port: [0xd100-0xd103]                                                                              
pci 0000:05:07.0: reg 18 io port: [0xd200-0xd207]                                                                              
pci 0000:05:07.0: reg 1c io port: [0xd300-0xd303]                                                                              
pci 0000:05:07.0: reg 20 io port: [0xd400-0xd40f]                                                                              
pci 0000:00:1e.0: transparent bridge                                                                                           
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]                                                                              
pci 0000:00:1e.0: bridge 32bit mmio: [0xe8200000-0xe82fffff]                                                                   
bus 00 -> node 0                                                                                                               
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]                                                                            
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]                                                                       
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]                                                                       
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]                                                                       
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]                                                                       
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)                                                             
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)                                                             
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)                                                             
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)                                                             
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.                                                
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)                                                             
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)                                                             
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)                                                             
SCSI subsystem initialized                                                                                                     
libata version 3.00 loaded.                                                                                                    
usbcore: registered new interface driver usbfs                                                                                 
usbcore: registered new interface driver hub                                                                                   
usbcore: registered new device driver usb                                                                                      
PCI: Using ACPI for IRQ routing                                                                                                
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0                                                                                     
hpet0: 4 comparators, 64-bit 14.318180 MHz counter                                                                             
pnp: PnP ACPI init                                                                                                             
ACPI: bus type pnp registered                                                                                                  
pnp: PnP ACPI: found 13 devices                                                                                                
ACPI: ACPI bus type pnp unregistered                                                                                           
system 00:01: ioport range 0x4d0-0x4d1 has been reserved                                                                       
system 00:01: ioport range 0x290-0x29f has been reserved                                                                       
system 00:01: ioport range 0x800-0x805 has been reserved                                                                       
system 00:01: ioport range 0x290-0x294 has been reserved                                                                       
system 00:01: ioport range 0x880-0x88f has been reserved                                                                       
system 00:09: ioport range 0x400-0x4bf has been reserved                                                                       
system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved                                                              
system 00:0b: iomem range 0xcf800-0xcffff has been reserved                                                                    
system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved                                                                
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved                                                                
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved                                                                
system 00:0b: iomem range 0xcfeb0000-0xcfefffff could not be reserved                                                          
system 00:0b: iomem range 0x0-0x9ffff could not be reserved                                                                    
system 00:0b: iomem range 0x100000-0xcfeaffff could not be reserved                                                            
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved                                                              
system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved                                                              
system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved                                                              
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved                                                              
system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved                                                              
system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved                                                              
system 00:0b: iomem range 0xe0000-0xeffff has been reserved                                                                    
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01                                                                            
pci 0000:00:01.0:   IO window: 0xa000-0xafff                                                                                   
pci 0000:00:01.0:   MEM window: 0xe4000000-0xe5ffffff                                                                          
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff                                                         
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02                                                                            
pci 0000:00:1c.0:   IO window: disabled                                                                                        
pci 0000:00:1c.0:   MEM window: disabled                                                                                       
pci 0000:00:1c.0:   PREFETCH window: disabled                                                                                  
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03                                                                            
pci 0000:00:1c.4:   IO window: 0xb000-0xbfff                                                                                   
pci 0000:00:1c.4:   MEM window: 0xe6000000-0xe6ffffff                                                                          
pci 0000:00:1c.4:   PREFETCH window: 0x000000e8000000-0x000000e80fffff                                                         
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04                                                                            
pci 0000:00:1c.5:   IO window: 0xc000-0xcfff                                                                                   
pci 0000:00:1c.5:   MEM window: 0xe7000000-0xe7ffffff                                                                          
pci 0000:00:1c.5:   PREFETCH window: 0x000000e8100000-0x000000e81fffff                                                         
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05                                                                            
pci 0000:00:1e.0:   IO window: 0xd000-0xdfff                                                                                   
pci 0000:00:1e.0:   MEM window: 0xe8200000-0xe82fffff                                                                          
pci 0000:00:1e.0:   PREFETCH window: disabled                                                                                  
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                   
pci 0000:00:01.0: setting latency timer to 64                                                                                  
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                   
pci 0000:00:1c.0: setting latency timer to 64                                                                                  
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                   
pci 0000:00:1c.4: setting latency timer to 64                                                                                  
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17                                                                   
pci 0000:00:1c.5: setting latency timer to 64                                                                                  
pci 0000:00:1e.0: setting latency timer to 64                                                                                  
bus: 00 index 0 io port: [0x00-0xffff]                                                                                         
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]                                                                            
bus: 01 index 0 io port: [0xa000-0xafff]                                                                                       
bus: 01 index 1 mmio: [0xe4000000-0xe5ffffff]                                                                                  
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]                                                                                  
bus: 01 index 3 mmio: [0x0-0x0]                                                                                                
bus: 02 index 0 mmio: [0x0-0x0]                                                                                                
bus: 02 index 1 mmio: [0x0-0x0]                                                                                                
bus: 02 index 2 mmio: [0x0-0x0]                                                                                                
bus: 02 index 3 mmio: [0x0-0x0]                                                                                                
bus: 03 index 0 io port: [0xb000-0xbfff]                                                                                       
bus: 03 index 1 mmio: [0xe6000000-0xe6ffffff]                                                                                  
bus: 03 index 2 mmio: [0xe8000000-0xe80fffff]                                                                                  
bus: 03 index 3 mmio: [0x0-0x0]                                                                                                
bus: 04 index 0 io port: [0xc000-0xcfff]                                                                                       
bus: 04 index 1 mmio: [0xe7000000-0xe7ffffff]                                                                                  
bus: 04 index 2 mmio: [0xe8100000-0xe81fffff]                                                                                  
bus: 04 index 3 mmio: [0x0-0x0]                                                                                                
bus: 05 index 0 io port: [0xd000-0xdfff]                                                                                       
bus: 05 index 1 mmio: [0xe8200000-0xe82fffff]                                                                                  
bus: 05 index 2 mmio: [0x0-0x0]                                                                                                
bus: 05 index 3 io port: [0x00-0xffff]                                                                                         
bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff]                                                                            
NET: Registered protocol family 2                                                                                              
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)                                                            
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)                                                          
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)                                                                   
TCP: Hash tables configured (established 262144 bind 65536)                                                                    
TCP reno registered                                                                                                            
NET: Registered protocol family 1                                                                                              
alg: cipher: Test 1 failed on encryption for aes-asm                                                                           
00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08                                                                      
VFS: Disk quotas dquot_6.5.1                                                                                                   
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)                                                                      
msgmni has been set to 7896                                                                                                    
alg: No test for stdrng (krng)                                                                                                 
io scheduler noop registered                                                                                                   
io scheduler anticipatory registered                                                                                           
io scheduler deadline registered                                                                                               
io scheduler cfq registered (default)                                                                                          
pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10                                                                     
pci 0000:00:1a.0: Performing full reset                                                                                        
pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010                                                                     
pci 0000:00:1a.1: Performing full reset                                                                                        
pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010                                                                     
pci 0000:00:1a.2: Performing full reset                                                                                        
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003a                                                                     
pci 0000:00:1d.0: Performing full reset                                                                                        
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010                                                                     
pci 0000:00:1d.1: Performing full reset                                                                                        
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010                                                                     
pci 0000:00:1d.2: Performing full reset                                                                                        
pci 0000:01:00.0: Boot video device                                                                                            
pcieport-driver 0000:00:01.0: setting latency timer to 64                                                                      
pcieport-driver 0000:00:01.0: found MSI capability                                                                             
pcieport-driver 0000:00:01.0: irq 383 for MSI/MSI-X                                                                            
pci_express 0000:00:01.0:pcie00: allocate port service                                                                         
pci_express 0000:00:01.0:pcie03: allocate port service                                                                         
pcieport-driver 0000:00:1c.0: setting latency timer to 64                                                                      
pcieport-driver 0000:00:1c.0: found MSI capability                                                                             
pcieport-driver 0000:00:1c.0: irq 382 for MSI/MSI-X                                                                            
pci_express 0000:00:1c.0:pcie00: allocate port service                                                                         
pci_express 0000:00:1c.0:pcie02: allocate port service                                                                         
pci_express 0000:00:1c.0:pcie03: allocate port service                                                                         
pcieport-driver 0000:00:1c.4: setting latency timer to 64                                                                      
pcieport-driver 0000:00:1c.4: found MSI capability                                                                             
pcieport-driver 0000:00:1c.4: irq 381 for MSI/MSI-X                                                                            
pci_express 0000:00:1c.4:pcie00: allocate port service                                                                         
pci_express 0000:00:1c.4:pcie02: allocate port service                                                                         
pci_express 0000:00:1c.4:pcie03: allocate port service                                                                         
pcieport-driver 0000:00:1c.5: setting latency timer to 64                                                                      
pcieport-driver 0000:00:1c.5: found MSI capability                                                                             
pcieport-driver 0000:00:1c.5: irq 380 for MSI/MSI-X                                                                            
pci_express 0000:00:1c.5:pcie00: allocate port service                                                                         
pci_express 0000:00:1c.5:pcie02: allocate port service                                                                         
pci_express 0000:00:1c.5:pcie03: allocate port service                                                                         
Non-volatile memory driver v1.2                                                                                                
ppdev: user-space parallel port driver                                                                                         
Linux agpgart interface v0.103                                                                                                 
input: Power Button (FF) as /class/input/input0                                                                                
ACPI: Power Button (FF) [PWRF]                                                                                                 
input: Power Button (CM) as /class/input/input1                                                                                
ACPI: Power Button (CM) [PWRB]                                                                                                 
ACPI: CPU0 (power states: C1[C1] C2[C2])                                                                                       
processor ACPI_CPU:00: registered as cooling_device0                                                                           
ACPI: Processor [CPU0] (supports 8 throttling states)                                                                          
ACPI: CPU1 (power states: C1[C1] C2[C2])                                                                                       
processor ACPI_CPU:01: registered as cooling_device1                                                                           
ACPI: Processor [CPU1] (supports 8 throttling states)                                                                          
ACPI: CPU2 (power states: C1[C1] C2[C2])                                                                                       
processor ACPI_CPU:02: registered as cooling_device2                                                                           
ACPI: Processor [CPU2] (supports 8 throttling states)                                                                          
ACPI: CPU3 (power states: C1[C1] C2[C2])                                                                                       
processor ACPI_CPU:03: registered as cooling_device3                                                                           
ACPI: Processor [CPU3] (supports 8 throttling states)                                                                          
Serial: 8250/16550 driver4 ports, IRQ sharing enabled                                                                          
Switched to high resolution mode on CPU 2                                                                                      
Switched to high resolution mode on CPU 3                                                                                      
Switched to high resolution mode on CPU 1                                                                                      
Switched to high resolution mode on CPU 0                                                                                      
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A                                                                           
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A                                                                                
loop: module loaded                                                                                                            
PPP generic driver version 2.4.2                                                                                               
PPP Deflate Compression module registered                                                                                      
PPP BSD Compression module registered                                                                                          
PPP MPPE Compression module registered                                                                                         
NET: Registered protocol family 24                                                                                             
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded                                                                                
r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                 
r8169 0000:03:00.0: setting latency timer to 64                                                                                
r8169 0000:03:00.0: irq 379 for MSI/MSI-X                                                                                      
eth0: RTL8168c/8111c at 0xffffc20000032000, 00:1f:d0:22:28:c4, XID 3c4000c0 IRQ 379                                            
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded                                                                                
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17                                                                 
r8169 0000:04:00.0: setting latency timer to 64                                                                                
r8169 0000:04:00.0: irq 378 for MSI/MSI-X                                                                                      
eth1: RTL8168c/8111c at 0xffffc20000036000, 00:1f:d0:22:28:c6, XID 3c4000c0 IRQ 378                                            
Driver 'sd' needs updating - please use bus_type methods                                                                       
Driver 'sr' needs updating - please use bus_type methods                                                                       
ata_piix 0000:00:1f.2: version 2.12                                                                                            
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19                                                              
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]                                                                                     
ata_piix 0000:00:1f.2: setting latency timer to 64                                                                             
scsi0 : ata_piix                                                                                                               
scsi1 : ata_piix                                                                                                               
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14                                                                
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15                                                                
ata1.00: SATA link down (SStatus 0 SControl 300)                                                                               
ata1.01: SATA link down (SStatus 0 SControl 300)                                                                               
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                                                      
ata2.01: SATA link down (SStatus 0 SControl 300)                                                                               
ata2.00: HPA detected: current 1953523055, native 1953525168                                                                   
ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7                                                                           
ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)                                                                  
ata2.00: configured for UDMA/133                                                                                               
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5                                                   
sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors: (1.00 TB/931 GiB)                                                      
sd 1:0:0:0: [sda] Write Protect is off                                                                                         
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00                                                                                      
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                        
sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors: (1.00 TB/931 GiB)                                                      
sd 1:0:0:0: [sda] Write Protect is off                                                                                         
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00                                                                                      
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                        
 sda: sda1 sda2 sda3 sda4                                                                                                      
sd 1:0:0:0: [sda] Attached SCSI disk                                                                                           
sd 1:0:0:0: Attached scsi generic sg0 type 0                                                                                   
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19                                                              
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]                                                                                     
ata_piix 0000:00:1f.5: setting latency timer to 64                                                                             
scsi2 : ata_piix                                                                                                               
scsi3 : ata_piix                                                                                                               
ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19                                                              
ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19                                                              
ata3: SATA link down (SStatus 0 SControl 300)                                                                                  
ata4: SATA link down (SStatus 0 SControl 300)                                                                                  
ohci1394 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18                                                              
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[e8204000-e82047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]           
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                                                                     
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96                                                                           
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                                              
ehci_hcd 0000:00:1a.7: setting latency timer to 64                                                                             
ehci_hcd 0000:00:1a.7: EHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file 'devices'                                                                              
drivers/usb/core/inode.c: creating file '001'                                                                                  
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1                                                           
ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6                                         
ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr                                                
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT                                          
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported                                                                  
ehci_hcd 0000:00:1a.7: supports USB remote wakeup                                                                              
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8305000                                                                               
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT                                          
ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN                                                  
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00                                                                              
usb usb1: default language 0x0409                                                                                              
usb usb1: uevent                                                                                                               
usb usb1: usb_probe_device                                                                                                     
usb usb1: configuration #1 chosen from 1 choice                                                                                
usb usb1: adding 1-0:1.0 (config #1, interface 0)                                                                              
usb 1-0:1.0: uevent                                                                                                            
hub 1-0:1.0: usb_probe_interface                                                                                               
hub 1-0:1.0: usb_probe_interface - got id                                                                                      
hub 1-0:1.0: USB hub found                                                                                                     
hub 1-0:1.0: 6 ports detected                                                                                                  
hub 1-0:1.0: standalone hub                                                                                                    
hub 1-0:1.0: no power switching (usb 1.0)                                                                                      
hub 1-0:1.0: individual port over-current protection                                                                           
hub 1-0:1.0: power on to power good time: 20ms                                                                                 
hub 1-0:1.0: local power source is good                                                                                        
hub 1-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002                                                                  
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb1: Product: EHCI Host Controller                                                                                        
usb usb1: Manufacturer: Linux 2.6.28-gentoo-r1 ehci_hcd                                                                        
usb usb1: SerialNumber: 0000:00:1a.7                                                                                           
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23                                                              
ehci_hcd 0000:00:1d.7: setting latency timer to 64                                                                             
ehci_hcd 0000:00:1d.7: EHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '002'                                                                                  
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2                                                           
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6                                         
ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr                                                
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT                                          
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported                                                                  
ehci_hcd 0000:00:1d.7: supports USB remote wakeup                                                                              
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8304000                                                                               
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT                                          
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN                                                  
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00                                                                              
usb usb2: default language 0x0409                                                                                              
usb usb2: uevent                                                                                                               
usb usb2: usb_probe_device                                                                                                     
usb usb2: configuration #1 chosen from 1 choice                                                                                
usb usb2: adding 2-0:1.0 (config #1, interface 0)                                                                              
usb 2-0:1.0: uevent                                                                                                            
hub 2-0:1.0: usb_probe_interface                                                                                               
hub 2-0:1.0: usb_probe_interface - got id                                                                                      
hub 2-0:1.0: USB hub found                                                                                                     
hub 2-0:1.0: 6 ports detected                                                                                                  
hub 2-0:1.0: standalone hub                                                                                                    
hub 2-0:1.0: no power switching (usb 1.0)                                                                                      
hub 2-0:1.0: individual port over-current protection                                                                           
hub 2-0:1.0: power on to power good time: 20ms                                                                                 
hub 2-0:1.0: local power source is good                                                                                        
hub 2-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002                                                                  
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb2: Product: EHCI Host Controller                                                                                        
usb usb2: Manufacturer: Linux 2.6.28-gentoo-r1 ehci_hcd                                                                        
usb usb2: SerialNumber: 0000:00:1d.7                                                                                           
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver                                                                         
ohci_hcd: block sizes: ed 80 td 96                                                                                             
uhci_hcd: USB Universal Host Controller Interface driver                                                                       
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                              
uhci_hcd 0000:00:1a.0: setting latency timer to 64                                                                             
uhci_hcd 0000:00:1a.0: UHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '003'                                                                                  
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3                                                           
uhci_hcd 0000:00:1a.0: detected 2 ports                                                                                        
uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000                                                                   
uhci_hcd 0000:00:1a.0: Performing full reset                                                                                   
uhci_hcd 0000:00:1a.0: supports USB remote wakeup                                                                              
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000                                                                              
usb usb3: default language 0x0409                                                                                              
usb usb3: uevent                                                                                                               
usb usb3: usb_probe_device                                                                                                     
usb usb3: configuration #1 chosen from 1 choice                                                                                
usb usb3: adding 3-0:1.0 (config #1, interface 0)                                                                              
usb 3-0:1.0: uevent                                                                                                            
hub 3-0:1.0: usb_probe_interface                                                                                               
hub 3-0:1.0: usb_probe_interface - got id                                                                                      
hub 3-0:1.0: USB hub found                                                                                                     
hub 3-0:1.0: 2 ports detected                                                                                                  
hub 3-0:1.0: standalone hub                                                                                                    
hub 3-0:1.0: no power switching (usb 1.0)                                                                                      
hub 3-0:1.0: individual port over-current protection                                                                           
hub 3-0:1.0: power on to power good time: 2ms                                                                                  
hub 3-0:1.0: local power source is good                                                                                        
hub 3-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001                                                                  
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb3: Product: UHCI Host Controller                                                                                        
usb usb3: Manufacturer: Linux 2.6.28-gentoo-r1 uhci_hcd                                                                        
usb usb3: SerialNumber: 0000:00:1a.0                                                                                           
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21                                                              
uhci_hcd 0000:00:1a.1: setting latency timer to 64                                                                             
uhci_hcd 0000:00:1a.1: UHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '004'                                                                                  
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4                                                           
uhci_hcd 0000:00:1a.1: detected 2 ports                                                                                        
uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000                                                                   
uhci_hcd 0000:00:1a.1: Performing full reset                                                                                   
uhci_hcd 0000:00:1a.1: supports USB remote wakeup                                                                              
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100                                                                              
usb usb4: default language 0x0409                                                                                              
usb usb4: uevent                                                                                                               
usb usb4: usb_probe_device                                                                                                     
usb usb4: configuration #1 chosen from 1 choice                                                                                
usb usb4: adding 4-0:1.0 (config #1, interface 0)                                                                              
usb 4-0:1.0: uevent                                                                                                            
hub 4-0:1.0: usb_probe_interface                                                                                               
hub 4-0:1.0: usb_probe_interface - got id                                                                                      
hub 4-0:1.0: USB hub found                                                                                                     
hub 4-0:1.0: 2 ports detected                                                                                                  
hub 4-0:1.0: standalone hub                                                                                                    
hub 4-0:1.0: no power switching (usb 1.0)                                                                                      
hub 4-0:1.0: individual port over-current protection                                                                           
hub 4-0:1.0: power on to power good time: 2ms                                                                                  
hub 4-0:1.0: local power source is good                                                                                        
hub 4-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001                                                                  
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb4: Product: UHCI Host Controller                                                                                        
usb usb4: Manufacturer: Linux 2.6.28-gentoo-r1 uhci_hcd                                                                        
usb usb4: SerialNumber: 0000:00:1a.1                                                                                           
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                                              
uhci_hcd 0000:00:1a.2: setting latency timer to 64                                                                             
uhci_hcd 0000:00:1a.2: UHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '005'                                                                                  
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5                                                           
uhci_hcd 0000:00:1a.2: detected 2 ports                                                                                        
uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000                                                                   
uhci_hcd 0000:00:1a.2: Performing full reset                                                                                   
uhci_hcd 0000:00:1a.2: supports USB remote wakeup                                                                              
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500                                                                              
usb usb5: default language 0x0409                                                                                              
usb usb5: uevent                                                                                                               
usb usb5: usb_probe_device                                                                                                     
usb usb5: configuration #1 chosen from 1 choice                                                                                
usb usb5: adding 5-0:1.0 (config #1, interface 0)                                                                              
usb 5-0:1.0: uevent                                                                                                            
hub 5-0:1.0: usb_probe_interface                                                                                               
hub 5-0:1.0: usb_probe_interface - got id                                                                                      
hub 5-0:1.0: USB hub found                                                                                                     
hub 5-0:1.0: 2 ports detected                                                                                                  
hub 5-0:1.0: standalone hub                                                                                                    
hub 5-0:1.0: no power switching (usb 1.0)                                                                                      
hub 5-0:1.0: individual port over-current protection                                                                           
hub 5-0:1.0: power on to power good time: 2ms                                                                                  
hub 5-0:1.0: local power source is good                                                                                        
hub 5-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001                                                                  
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb5: Product: UHCI Host Controller                                                                                        
usb usb5: Manufacturer: Linux 2.6.28-gentoo-r1 uhci_hcd                                                                        
usb usb5: SerialNumber: 0000:00:1a.2                                                                                           
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23                                                              
uhci_hcd 0000:00:1d.0: setting latency timer to 64                                                                             
uhci_hcd 0000:00:1d.0: UHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '006'                                                                                  
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6                                                           
uhci_hcd 0000:00:1d.0: detected 2 ports                                                                                        
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000                                                                   
uhci_hcd 0000:00:1d.0: Performing full reset                                                                                   
uhci_hcd 0000:00:1d.0: supports USB remote wakeup                                                                              
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200                                                                              
usb usb6: default language 0x0409                                                                                              
usb usb6: uevent                                                                                                               
usb usb6: usb_probe_device                                                                                                     
usb usb6: configuration #1 chosen from 1 choice                                                                                
usb usb6: adding 6-0:1.0 (config #1, interface 0)                                                                              
usb 6-0:1.0: uevent                                                                                                            
hub 6-0:1.0: usb_probe_interface                                                                                               
hub 6-0:1.0: usb_probe_interface - got id                                                                                      
hub 6-0:1.0: USB hub found                                                                                                     
hub 6-0:1.0: 2 ports detected                                                                                                  
hub 6-0:1.0: standalone hub                                                                                                    
hub 6-0:1.0: no power switching (usb 1.0)                                                                                      
hub 6-0:1.0: individual port over-current protection                                                                           
hub 6-0:1.0: power on to power good time: 2ms                                                                                  
hub 6-0:1.0: local power source is good                                                                                        
hub 6-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001                                                                  
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb6: Product: UHCI Host Controller                                                                                        
usb usb6: Manufacturer: Linux 2.6.28-gentoo-r1 uhci_hcd                                                                        
usb usb6: SerialNumber: 0000:00:1d.0                                                                                           
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19                                                              
uhci_hcd 0000:00:1d.1: setting latency timer to 64                                                                             
uhci_hcd 0000:00:1d.1: UHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '007'                                                                                  
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7                                                           
uhci_hcd 0000:00:1d.1: detected 2 ports                                                                                        
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000                                                                   
uhci_hcd 0000:00:1d.1: Performing full reset                                                                                   
uhci_hcd 0000:00:1d.1: supports USB remote wakeup                                                                              
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300                                                                              
usb usb7: default language 0x0409                                                                                              
usb usb7: uevent                                                                                                               
usb usb7: usb_probe_device                                                                                                     
usb usb7: configuration #1 chosen from 1 choice                                                                                
usb usb7: adding 7-0:1.0 (config #1, interface 0)                                                                              
usb 7-0:1.0: uevent                                                                                                            
hub 7-0:1.0: usb_probe_interface                                                                                               
hub 7-0:1.0: usb_probe_interface - got id                                                                                      
hub 7-0:1.0: USB hub found                                                                                                     
hub 7-0:1.0: 2 ports detected                                                                                                  
hub 7-0:1.0: standalone hub                                                                                                    
hub 7-0:1.0: no power switching (usb 1.0)                                                                                      
hub 7-0:1.0: individual port over-current protection                                                                           
hub 7-0:1.0: power on to power good time: 2ms                                                                                  
hub 7-0:1.0: local power source is good                                                                                        
hub 7-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001                                                                  
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb7: Product: UHCI Host Controller                                                                                        
usb usb7: Manufacturer: Linux 2.6.28-gentoo-r1 uhci_hcd                                                                        
usb usb7: SerialNumber: 0000:00:1d.1                                                                                           
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                                              
uhci_hcd 0000:00:1d.2: setting latency timer to 64                                                                             
uhci_hcd 0000:00:1d.2: UHCI Host Controller                                                                                    
drivers/usb/core/inode.c: creating file '008'                                                                                  
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8                                                           
uhci_hcd 0000:00:1d.2: detected 2 ports                                                                                        
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000                                                                   
uhci_hcd 0000:00:1d.2: Performing full reset                                                                                   
uhci_hcd 0000:00:1d.2: supports USB remote wakeup                                                                              
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400                                                                              
usb usb8: default language 0x0409                                                                                              
usb usb8: uevent                                                                                                               
usb usb8: usb_probe_device                                                                                                     
usb usb8: configuration #1 chosen from 1 choice                                                                                
usb usb8: adding 8-0:1.0 (config #1, interface 0)                                                                              
usb 8-0:1.0: uevent                                                                                                            
hub 8-0:1.0: usb_probe_interface                                                                                               
hub 8-0:1.0: usb_probe_interface - got id                                                                                      
hub 8-0:1.0: USB hub found                                                                                                     
hub 8-0:1.0: 2 ports detected                                                                                                  
hub 8-0:1.0: standalone hub                                                                                                    
hub 8-0:1.0: no power switching (usb 1.0)                                                                                      
hub 8-0:1.0: individual port over-current protection                                                                           
hub 8-0:1.0: power on to power good time: 2ms                                                                                  
hub 8-0:1.0: local power source is good                                                                                        
hub 8-0:1.0: trying to enable port power on non-switchable hub                                                                 
drivers/usb/core/inode.c: creating file '001'                                                                                  
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001                                                                  
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                             
usb usb8: Product: UHCI Host Controller                                                                                        
usb usb8: Manufacturer: Linux 2.6.28-gentoo-r1 uhci_hcd                                                                        
usb usb8: SerialNumber: 0000:00:1d.2                                                                                           
Initializing USB Mass Storage driver...                                                                                        
usbcore: registered new interface driver usb-storage                                                                           
USB Mass Storage support registered.                                                                                           
usbcore: registered new interface driver uss720                                                                                
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip                                     
uss720: NOTE: this is a special purpose driver to allow nonstandard                                                            
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables                                                             
uss720: If you just want to connect to a printer, use usblp instead                                                            
PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12                                                                        
PNP: PS/2 controller doesn't have KBD irq; using default 1                                                                     
serio: i8042 KBD port at 0x60,0x64 irq 1                                                                                       
serio: i8042 AUX port at 0x60,0x64 irq 12                                                                                      
mice: PS/2 mouse device common for all mice                                                                                    
rtc_cmos 00:04: RTC can wake from S4                                                                                           
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0                                                                          
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs                                                                       
i2c /dev entries driver                                                                                                        
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                                            
cpuidle: using governor ladder                                                                                                 
cpuidle: using governor menu                                                                                                   
usbcore: registered new interface driver usbhid                                                                                
usbhid: v2.6:USB HID core driver                                                                                               
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.                                                                    
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22                                                             
HDA Intel 0000:00:1b.0: setting latency timer to 64                                                                            
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...                                                            
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17                                                             
HDA Intel 0000:01:00.1: setting latency timer to 64                                                                            
ALSA device list:                                                                                                              
  #0: HDA Intel at 0xe8300000 irq 22                                                                                           
  #1: HDA ATI HDMI at 0xe5010000 irq 17                                                                                        
Netfilter messages via NETLINK v0.30.                                                                                          
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)                                                                          
ctnetlink v0.93: registering with nfnetlink.                                                                                   
IPv4 over IPv4 tunneling driver                                                                                                
GRE over IPv4 tunneling driver                                                                                                 
ip_tables: (C) 2000-2006 Netfilter Core Team                                                                                   
TCP cubic registered                                                                                                           
Initializing XFRM netlink socket                                                                                               
NET: Registered protocol family 10                                                                                             
ip6_tables: (C) 2000-2006 Netfilter Core Team                                                                                  
IPv6 over IPv4 tunneling driver                                                                                                
NET: Registered protocol family 17                                                                                             
RPC: Registered udp transport module.                                                                                          
RPC: Registered tcp transport module.                                                                                          
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000                                                                                 
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT                                                  
hub 2-0:1.0: port 6: status 0501 change 0001                                                                                   
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000                                                                                 
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000                                                                                 
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000                                                                                 
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000                                                                                 
uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00                                                                                   
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000                                                                                 
hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000                                                                                 
hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s                                                                        
ehci_hcd 0000:00:1d.7: port 6 low speed --> companion                                                                          
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC                                                  
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040                                                                                 
hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0004                                                                                 
uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00                                                                                   
hub 8-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s                                                                        
hub 8-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301                                                           
hub 8-0:1.0: port 2 not reset yet, waiting 50ms                                                                                
usb 8-2: new low speed USB device using uhci_hcd and address 2                                                                 
usb 8-2: skipped 1 descriptor after interface                                                                                  
usb 8-2: skipped 1 descriptor after interface                                                                                  
usb 8-2: default language 0x0409                                                                                               
input: ImPS/2 Generic Wheel Mouse as /class/input/input2                                                                       
usb 8-2: uevent                                                                                                                
usb 8-2: usb_probe_device                                                                                                      
usb 8-2: configuration #1 chosen from 1 choice                                                                                 
usb 8-2: adding 8-2:1.0 (config #1, interface 0)                                                                               
usb 8-2:1.0: uevent                                                                                                            
usbhid 8-2:1.0: usb_probe_interface                                                                                            
usbhid 8-2:1.0: usb_probe_interface - got id                                                                                   
input:   USB Keyboard as /class/input/input3                                                                                   
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us                                                       
generic-usb 0003:04D9:1603.0001: input: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.2-2/input0                   
usb 8-2: adding 8-2:1.1 (config #1, interface 1)                                                                               
usb 8-2:1.1: uevent                                                                                                            
usbhid 8-2:1.1: usb_probe_interface                                                                                            
usbhid 8-2:1.1: usb_probe_interface - got id                                                                                   
input:   USB Keyboard as /class/input/input4                                                                                   
uhci_hcd 0000:00:1d.2: reserve dev 2 ep82-INT, period 8, phase 4, 118 us                                                       
generic-usb 0003:04D9:1603.0002: input: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.2-2/input1                     
drivers/usb/core/inode.c: creating file '002'                                                                                  
usb 8-2: New USB device found, idVendor=04d9, idProduct=1603                                                                   
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0                                                              
usb 8-2: Product: USB Keyboard                                                                                                 
usb 8-2: Manufacturer:                                                                                                         
ReiserFS: sda4: found reiserfs format "3.6" with standard journal                                                              
ReiserFS: sda4: using ordered data mode                                                                                        
usb usb3: suspend_rh (auto-stop)                                                                                               
usb usb4: suspend_rh (auto-stop)                                                                                               
usb usb5: suspend_rh (auto-stop)                                                                                               
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda4: checking transaction log (sda4)                                                                                                       
ReiserFS: sda4: Using r5 hash to sort names                                                                                                           
VFS: Mounted root (reiserfs filesystem) readonly.                                                                                                     
Freeing unused kernel memory: 348k freed                                                                                                              
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[002b9b7b00001fd0]                                                                                       
usb usb6: suspend_rh (auto-stop)                                                                                                                      
usb usb7: suspend_rh (auto-stop)                                                                                                                      
usb usb3: uevent                                                                                                                                      
usb 3-0:1.0: uevent                                                                                                                                   
usb usb4: uevent                                                                                                                                      
usb 4-0:1.0: uevent                                                                                                                                   
usb usb5: uevent                                                                                                                                      
usb 5-0:1.0: uevent                                                                                                                                   
usb usb1: uevent                                                                                                                                      
usb 1-0:1.0: uevent                                                                                                                                   
usb usb6: uevent                                                                                                                                      
usb 6-0:1.0: uevent                                                                                                                                   
usb usb7: uevent                                                                                                                                      
usb 7-0:1.0: uevent                                                                                                                                   
usb usb8: uevent                                                                                                                                      
usb 8-0:1.0: uevent                                                                                                                                   
usb 8-2: uevent                                                                                                                                       
usb 8-2:1.0: uevent                                                                                                                                   
usb 8-2:1.1: uevent                                                                                                                                   
usb usb2: uevent                                                                                                                                      
usb 2-0:1.0: uevent                                                                                                                                   
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.                                                   
[fglrx] Maximum main memory to use for locked dma buffers: 3786 MBytes.                                                                               
[fglrx]   vendor: 1002 device: 9440 count: 1                                                                                                          
[fglrx] ioport: bar 4, base 0xa000, size: 0x100                                                                                                       
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                                          
pci 0000:01:00.0: setting latency timer to 64                                                                                                         
[fglrx] Driver built-in PAT support is enabled successfully                                                                                           
[fglrx] module loaded - fglrx 8.57.2 [Jan 14 2009] with 1 minors                                                                                      
r8169: eth0: link up                                                                                                                                  
r8169: eth0: link up                                                                                                                                  
Adding 2008116k swap on /dev/sda3.  Priority:-1 extents:1 across:2008116k                                                                             
eth0: no IPv6 routers present                                                                                                                         
[fglrx] Firegl kernel thread PID: 4694                                                                                                                
[fglrx] Gart USWC size:1910 M.                                                                                                                        
[fglrx] Gart cacheable size:60 M.                                                                                                                     
[fglrx] Reserved FB block: Shared offset:0, size:1000000                                                                                              
[fglrx] Reserved FB block: Unshared offset:fc1b000, size:3e5000
[fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
BUG: unable to handle kernel paging request at ffffc200040e86d8
IP: [<ffffffffa0063b49>] ulReadMmRegisterUlongViaAddr+0x9/0x10 [fglrx]
PGD 12f803067 PUD 12f804067 PMD 12f962067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/module/fglrx/initstate
CPU 2
Modules linked in: fglrx(P)
Pid: 5526, comm: X Tainted: P           2.6.28-gentoo-r1 #6
RIP: 0010:[<ffffffffa0063b49>]  [<ffffffffa0063b49>] ulReadMmRegisterUlongViaAddr+0x9/0x10 [fglrx]
RSP: 0018:ffff88012b3a1ce0  EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88012e07b190 RCX: 000000000000000c
RDX: 00000000000021b6 RSI: 00000000000021b6 RDI: ffffc200040e0000
RBP: ffffc200040e0000 R08: 0000000000000000 R09: ffffffffa00e8aa0
R10: 0000000000000004 R11: ffffffff810240f0 R12: 00000000000021b6
R13: ffff88012fb60000 R14: 000000004068646a R15: ffff88012eb38600
FS:  00007fa56a9706f0(0000) GS:ffff88012f802900(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc200040e86d8 CR3: 000000012e399000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process X (pid: 5526, threadinfo ffff88012b3a0000, task ffff88012fb9e750)
Stack:
 ffffffffa006392b 00000000e5010000 00007fff7298caf0 ffff88012e07b000
 ffff88012e07b190 00007fff7298caf0 ffffffffa005edce ffff88012e07b000
 ffffffffa0035b99 ffff88012eb38600 0000000000000868 ffff88012e308000
Call Trace:
 [<ffffffffa006392b>] ? ulReadMmRegisterUlong+0x6b/0x140 [fglrx]
 [<ffffffffa005edce>] ? Cail_RV770_GetP2PFlushCommand+0x313e/0x33d0 [fglrx]
 [<ffffffffa0035b99>] ? CAILExit+0x139/0x190 [fglrx]
 [<ffffffffa00165df>] ? firegl_cail_free+0x3f/0x70 [fglrx]
 [<ffffffffa002b61a>] ? hal_init_asic+0x45a/0x5e0 [fglrx]
 [<ffffffff8106fe08>] ? filemap_fault+0x268/0x460
 [<ffffffffa002b1c0>] ? hal_init_asic+0x0/0x5e0 [fglrx]
 [<ffffffffa000fa5a>] ? firegl_ioctl+0x1ea/0xf10 [fglrx]
 [<ffffffff810a809d>] ? vfs_ioctl+0x7d/0xa0
 [<ffffffff810a813c>] ? do_vfs_ioctl+0x7c/0x480
 [<ffffffff810273d6>] ? do_page_fault+0x296/0x8a0
 [<ffffffff810a8589>] ? sys_ioctl+0x49/0x80
 [<ffffffff8146d3d9>] ? error_exit+0x0/0x51
 [<ffffffff8100c21b>] ? system_call_fastpath+0x16/0x1b
Code: 0f 85 0e ff ff ff 44 89 f2 44 89 ee 48 89 df e8 0e 72 ff ff 85 c0 0f 84 40 ff ff ff e9 f3 fe ff ff 90 31 c0 48 85 ff 74 05 89 f2 <8b> 04 97 c3 66 66 90 48 85 ff 74 05 89 f1 89 14 8f c3 66 66 90
RIP  [<ffffffffa0063b49>] ulReadMmRegisterUlongViaAddr+0x9/0x10 [fglrx]
 RSP <ffff88012b3a1ce0>
CR2: ffffc200040e86d8
---[ end trace c111cfd30cb1e10f ]---
[fglrx:firegl_release] *ERROR* device busy: 1 0
[fglrx] release failed with code -EBUSY