dmesg

dmesg_libdrm-2.4.4.txt (text/plain), 30.17 KB, created by Uros on 2009-02-02 23:07:39 UTC

 NVS)
 BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
 BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
 BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
 BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7dd31 max_arch_pfn = 0x100000
kernel direct mapping tables up to 377fe000 @ 7000-d000
RAMDISK: 37f7c000 - 37fef0ee
Allocated new RAMDISK: 00009000 - 0007c0ee
Move RAMDISK from 0000000037f7c000 - 0000000037fef0ed to 00009000 - 0007c0ed
ACPI: RSDP 000FE020, 0024 (r2 APPLE )
ACPI: XSDT 7EEEE1C0, 0084 (r1 APPLE   Apple00       C1       1000013)
ACPI: FACP 7EEEC000, 00F4 (r3 APPLE   Apple00       C1 Loki       5F)
ACPI: DSDT 7EEE1000, 45C6 (r1 APPLE   MacBook    40001 INTL 20061109)
ACPI: FACS 7EECC000, 0040
ACPI: HPET 7EEEB000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: APIC 7EEEA000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: MCFG 7EEE9000, 003C (r1 APPLE   Apple00        1 Loki       5F)
ACPI: ASF! 7EEE8000, 00A5 (r32 APPLE   Apple00        1 Loki       5F)
ACPI: SBST 7EEE7000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: ECDT 7EEE6000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: SSDT 7EEC7000, 04DC (r1  APPLE    CpuPm     3000 INTL 20061109)
ACPI: SSDT 7EEC6000, 025F (r1  APPLE  Cpu0Tst     3000 INTL 20061109)
ACPI: SSDT 7EEC5000, 00A6 (r1  APPLE  Cpu1Tst     3000 INTL 20061109)
ACPI: SSDT 7EEE0000, 0544 (r1 SataRe  SataPri     1000 INTL 20061109)
ACPI: SSDT 7EEDF000, 0477 (r1 SataRe  SataSec     1000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
1125MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 0007d000 - 00083f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000074df70]    TEXT DATA BSS ==> [0000100000 - 000074df70]
  #4 [000074e000 - 0000751000]    INIT_PG_TABLE ==> [000074e000 - 0000751000]
  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #7 [0000009000 - 000007c0ee]      NEW RAMDISK ==> [0000009000 - 000007c0ee]
  #8 [000007d000 - 0000084000]          BOOTMAP ==> [000007d000 - 0000084000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007dd31
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0007dd31
On node 0 totalpages: 515280
free_area_init_node: node 0, pgdat c0684380, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2251 pages used for memmap
  HighMem zone: 285800 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
PERCPU: Allocating 32768 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 511253
Kernel command line: root=/dev/sda3 video=uvesafb:1024x768-32@60,mtrr:3,ywrap fbcon=scrollback:128K splash=silent,fadein,theme:livecd-2007.0 usbcore.autosuspend=1 quiet console=tty1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 2393.893 MHz processor.
Console: colour VGA+ 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2036136k/2061508k available (4028k kernel code, 24120k reserved, 1721k data, 352k init, 1152204k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9f000 - 0xfffff000   ( 384 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc06a5000 - 0xc06fd000   ( 352 kB)
      .data : 0xc04ef2e9 - 0xc069da8c   (1721 kB)
      .text : 0xc0100000 - 0xc04ef2e9   (4028 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.78 BogoMIPS (lpj=2393893)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.74 BogoMIPS (lpj=2393870)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9575.52 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
net_namespace: 744 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in E820
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0x90100000-0x901fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
pci 0000:00:02.0: reg 20 io port: [0x6110-0x6117]
pci 0000:00:02.1: reg 10 64bit mmio: [0x90200000-0x902fffff]
pci 0000:00:1a.0: reg 20 io port: [0x60c0-0x60df]
pci 0000:00:1a.1: reg 20 io port: [0x60a0-0x60bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0x90704c00-0x90704fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0x90700000-0x90703fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x90704800-0x90704bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x6108-0x610f]
pci 0000:00:1f.1: reg 14 io port: [0x6124-0x6127]
pci 0000:00:1f.1: reg 18 io port: [0x6100-0x6107]
pci 0000:00:1f.1: reg 1c io port: [0x6120-0x6123]
pci 0000:00:1f.1: reg 20 io port: [0x60e0-0x60ef]
pci 0000:00:1f.2: reg 10 io port: [0x60f8-0x60ff]
pci 0000:00:1f.2: reg 14 io port: [0x611c-0x611f]
pci 0000:00:1f.2: reg 18 io port: [0x60f0-0x60f7]
pci 0000:00:1f.2: reg 1c io port: [0x6118-0x611b]
pci 0000:00:1f.2: reg 20 io port: [0x6020-0x602f]
pci 0000:00:1f.2: reg 24 io port: [0x4000-0x400f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x90705000-0x907050ff]
pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
pci 0000:00:1c.0: bridge 32bit mmio: [0x90600000-0x906fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0x90500000-0x90503fff]
pci 0000:02:00.0: reg 18 64bit mmio: [0x90000000-0x900fffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0x90500000-0x905fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0x90000000-0x900fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0x90400000-0x90403fff]
pci 0000:03:00.0: reg 18 io port: [0x5000-0x50ff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0x90400000-0x904fffff]
pci 0000:04:03.0: reg 10 32bit mmio: [0x90300000-0x90300fff]
pci 0000:04:03.0: supports D1 D2
pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0x90300000-0x903fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:07: ioport range 0x680-0x69f has been reserved
system 00:07: ioport range 0x800-0x80f has been reserved
system 00:07: ioport range 0x810-0x817 has been reserved
system 00:07: ioport range 0x400-0x47f has been reserved
system 00:07: ioport range 0x500-0x53f has been reserved
system 00:07: ioport range 0x1640-0x164f has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0x90600000-0x906fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4:   IO window: disabled
pci 0000:00:1c.4:   MEM window: 0x90500000-0x905fffff
pci 0000:00:1c.4:   PREFETCH window: 0x00000090000000-0x000000900fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.5:   IO window: 0x5000-0x5fff
pci 0000:00:1c.5:   MEM window: 0x90400000-0x904fffff
pci 0000:00:1c.5:   PREFETCH window: 0x00000090800000-0x000000908fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0x90300000-0x903fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0000 -> 0002)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 mmio: [0x0-0x0]
bus: 01 index 1 mmio: [0x90600000-0x906fffff]
bus: 01 index 2 mmio: [0x0-0x0]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0x90500000-0x905fffff]
bus: 02 index 2 mmio: [0x90000000-0x900fffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0x5000-0x5fff]
bus: 03 index 1 mmio: [0x90400000-0x904fffff]
bus: 03 index 2 mmio: [0x90800000-0x908fffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 mmio: [0x0-0x0]
bus: 04 index 1 mmio: [0x90300000-0x903fffff]
bus: 04 index 2 mmio: [0x0-0x0]
bus: 04 index 3 io port: [0x00-0xffff]
bus: 04 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 460k freed
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
fuse init (API version 7.10)
msgmni has been set to 1729
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 319 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pcieport-driver 0000:00:1c.4: irq 318 for MSI/MSI-X
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pcieport-driver 0000:00:1c.5: irq 317 for MSI/MSI-X
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 15868K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
uvesafb: Intel Corporation, Intel(r)Crestline Graphics Controller, Hardware Version 0.0, OEM: Intel(r)Crestline Graphics Chip Accelerated VGA BIOS, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 71 MHz
uvesafb: scrolling: redraw
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Console: switching to colour frame buffer device 128x48
fbcondecor: console 0 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 0
uvesafb: framebuffer at 0x80000000, mapped to 0xf8280000, using 6144k, total 15808k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
input: Video Bus as /class/input/input4
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
ACPI: SSDT 7EECAA98, 0340 (r1  APPLE  Cpu0Ist     3000 INTL 20061109)
ACPI: SSDT 7EEC8C18, 02AD (r1  APPLE  Cpu0Cst     3001 INTL 20061109)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7EEC9F18, 00C8 (r1  APPLE  Cpu1Ist     3000 INTL 20061109)
ACPI: SSDT 7EEC8F18, 0085 (r1  APPLE  Cpu1Cst     3000 INTL 20061109)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 316 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 on minor 0
brd: module loaded
loop: module loaded
sky2 driver version 1.22
sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:03:00.0: Marvell Yukon 88E8058 Gigabit Ethernet Controller
 Part Number: Yukon 88E8058
 Engineering Level: Rev. 1.3
 Manufacturer: Marvell
sky2 0000:03:00.0: irq 315 for MSI/MSI-X
sky2 eth0: addr 00:1f:5b:f7:b7:89
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
ata1.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, BP10, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
ACPI: Device needs an ACPI driver
applesmc: Apple MacBook 4 detected:
applesmc:  - Model with accelerometer
applesmc:  - Model without light sensors and backlight
applesmc:  - Model with 10 temperature sensors
applesmc: device has already been initialized (0xe0, 0x00).
applesmc: device successfully initialized.
applesmc: 1 fans found.
input: applesmc as /class/input/input5
applesmc: driver successfully loaded.
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
Bluetooth: Generic Bluetooth USB driver ver 0.3
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ALSA device list:
  No soundcards found.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Bridge firewalling registered
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
registered taskstats version 1
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 352k freed
kjournald starting.  Commit interval 5 seconds
Clocksource tsc unstable (delta = -169969747 ns)
usb 2-4: new high speed USB device using ehci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: HID 05ac:1000 as /class/input/input6
generic-usb 0003:05AC:1000.0001: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
input: HID 05ac:1000 as /class/input/input7
generic-usb 0003:05AC:1000.0002: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input8
generic-usb 0003:046D:C521.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
input: Logitech USB Receiver as /class/input/input9
generic-usb 0003:046D:C521.0004: input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
apple 0003:05AC:8242.0005: hiddev97: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
usb 7-2: new full speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10
apple 0003:05AC:022A.0006: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
appletouch: Geyser mode initialized.
input: appletouch as /class/input/input11
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input12
apple 0003:05AC:022A.0007: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
ieee80211_crypt: registered algorithm 'NULL'
ohci1394 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[90300000-903007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: setting latency timer to 64
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
wl: module license 'unspecified' taints kernel.
uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
wl 0000:02:00.0: setting latency timer to 64
input: Built-in iSight as /class/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ieee80211_crypt: registered algorithm 'TKIP'
eth1: Broadcom BCM4328 802.11 Wireless Controller 5.10.27.12
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001ff3fffe351ac8]
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x510 offMax=0xc390
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.1.0 (interface 0x000a0008).
EXT3 FS on sda3, internal journal
fbcondecor: console 1 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 1
Adding 1048568k swap on /swap.  Priority:-1 extents:281 across:1150604k
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: no IPv6 routers present
eth1: no IPv6 routers present
mtrr: no MTRR for 80000000,10000000 found