BIOS EBDA/lowmem at: 0009dc00/0009dc00 Linux version 2.6.28-gentoo-r1 (root@mail) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #17 SMP Mon Feb 2 01:19:07 EST 2009 Command line: /root=dev/sda4 rootfstype=ext4 video=uvesafb:off vga=0x31B quiet splash=silent,fadein,theme:livecd-2007.0 CONSOLE=/dev/tty1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff80000 (usable) BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data) BIOS-e820: 000000003ff8e000 - 000000003ffd0000 (ACPI NVS) BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x3ff80 max_arch_pfn = 0x3ffffffff init_memory_mapping: 0000000000000000-000000003ff80000 0000000000 - 003fe00000 page 2M 003fe00000 - 003ff80000 page 4k kernel direct mapping tables up to 3ff80000 @ 10000-13000 last_map_addr: 3ff80000 end: 3ff80000 RAMDISK: 37f61000 - 37fef790 ACPI: RSDP 000FB190, 0014 (r0 ACPIAM) ACPI: RSDT 3FF80000, 0040 (r1 A_M_I_ OEMRSDT 12000817 MSFT 97) ACPI: FACP 3FF80200, 0084 (r2 A_M_I_ OEMFACP 12000817 MSFT 97) ACPI: DSDT 3FF80440, A017 (r1 A1007 A1007001 1 INTL 20060113) ACPI: FACS 3FF8E000, 0040 ACPI: APIC 3FF80390, 006C (r1 A_M_I_ OEMAPIC 12000817 MSFT 97) ACPI: MCFG 3FF80400, 003C (r1 A_M_I_ OEMMCFG 12000817 MSFT 97) ACPI: OEMB 3FF8E040, 0081 (r1 A_M_I_ AMI_OEM 12000817 MSFT 97) ACPI: HPET 3FF8A460, 0038 (r1 A_M_I_ OEMHPET 12000817 MSFT 97) ACPI: OSFR 3FF8A4A0, 00B0 (r1 A_M_I_ OEMOSFR 12000817 MSFT 97) ACPI: SSDT 3FF8EAD0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000003ff80000 Bootmem setup node 0 0000000000000000-000000003ff80000 NODE_DATA [0000000000011000 - 0000000000015fff] bootmap [0000000000016000 - 000000000001dfef] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003ff80000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000099ff08] TEXT DATA BSS ==> [0000200000 - 000099ff08] #3 [0037f61000 - 0037fef790] RAMDISK ==> [0037f61000 - 0037fef790] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0003ff80 On node 0 totalpages: 261901 DMA zone: 56 pages used for memmap DMA zone: 2055 pages reserved DMA zone: 1870 pages, LIFO batch:0 DMA32 zone: 3527 pages used for memmap DMA32 zone: 254393 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a301 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) PERCPU: Allocating 49152 bytes of per cpu data per cpu data for cpu0 on node0 at 000000000100a000 per cpu data for cpu1 on node0 at 0000000001016000 per cpu data for cpu2 on node0 at 0000000001022000 per cpu data for cpu3 on node0 at 000000000102e000 NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 256263 Policy zone: DMA32 Kernel command line: /root=dev/sda4 rootfstype=ext4 video=uvesafb:off vga=0x31B quiet splash=silent,fadein,theme:livecd-2007.0 CONSOLE=/dev/tty1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2400.015 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Memory: 1024560k/1048064k available (3885k kernel code, 460k absent, 23044k reserved, 2311k data, 568k init) hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.03 BogoMIPS (lpj=9600060) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.15 BogoMIPS (lpj=9600305) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4800.17 BogoMIPS (lpj=9600354) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM2) CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4800.18 BogoMIPS (lpj=9600379) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (19200.54 BogoMIPS). net_namespace: 952 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f] pci 0000:00:1a.1: reg 20 io port: [0x9880-0x989f] pci 0000:00:1a.2: reg 20 io port: [0x9c00-0x9c1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6ffc00-0xfe6fffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6f8000-0xfe6fbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x9080-0x909f] pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f] pci 0000:00:1d.2: reg 20 io port: [0x9480-0x949f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe6ff800-0xfe6ffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x8000-0x8007] pci 0000:00:1f.2: reg 14 io port: [0x7c00-0x7c03] pci 0000:00:1f.2: reg 18 io port: [0x7880-0x7887] pci 0000:00:1f.2: reg 1c io port: [0x7800-0x7803] pci 0000:00:1f.2: reg 20 io port: [0x7480-0x748f] pci 0000:00:1f.2: reg 24 io port: [0x7400-0x740f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6ff400-0xfe6ff4ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:00:1f.5: reg 10 io port: [0x9000-0x9007] pci 0000:00:1f.5: reg 14 io port: [0x8c00-0x8c03] pci 0000:00:1f.5: reg 18 io port: [0x8880-0x8887] pci 0000:00:1f.5: reg 1c io port: [0x8800-0x8803] pci 0000:00:1f.5: reg 20 io port: [0x8480-0x848f] pci 0000:00:1f.5: reg 24 io port: [0x8400-0x840f] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe7e0000-0xfe7effff] pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe7c0000-0xfe7dffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xa000-0xafff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff] pci 0000:04:00.0: reg 18 io port: [0xd800-0xd8ff] pci 0000:04:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:03:00.0: reg 18 io port: [0xc800-0xc8ff] pci 0000:03:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:02:00.0: reg 10 io port: [0xbc00-0xbc07] pci 0000:02:00.0: reg 14 io port: [0xb880-0xb883] pci 0000:02:00.0: reg 18 io port: [0xb800-0xb807] pci 0000:02:00.0: reg 1c io port: [0xb480-0xb483] pci 0000:02:00.0: reg 20 io port: [0xb400-0xb40f] pci 0000:02:00.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: PME# supported from D0 D1 D3hot pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:06:00.0: reg 10 32bit mmio: [0xfebfe000-0xfebfffff] pci 0000:06:03.0: reg 10 32bit mmio: [0xfebfd800-0xfebfdfff] pci 0000:06:03.0: reg 14 io port: [0xec00-0xec7f] pci 0000:06:03.0: supports D2 pci 0000:06:03.0: PME# supported from D2 D3hot D3cold pci 0000:06:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 4D, should be 45 [20080926] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:07: ioport range 0x290-0x29f has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x500-0x57f has been reserved system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xa000-0xafff pci 0000:00:01.0: MEM window: 0xfe700000-0xfe7fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0xd000-0xdfff pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: 0xc000-0xcfff pci 0000:00:1c.3: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: IO window: 0xb000-0xbfff pci 0000:00:1c.4: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 io port: [0xa000-0xafff] bus: 01 index 1 mmio: [0xfe700000-0xfe7fffff] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 05 index 0 mmio: [0x0-0x0] bus: 05 index 1 mmio: [0x0-0x0] bus: 05 index 2 mmio: [0xfdf00000-0xfdffffff] bus: 05 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0xd000-0xdfff] bus: 04 index 1 mmio: [0xfea00000-0xfeafffff] bus: 04 index 2 mmio: [0x0-0x0] bus: 04 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0xc000-0xcfff] bus: 03 index 1 mmio: [0xfe900000-0xfe9fffff] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xb000-0xbfff] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0xe000-0xefff] bus: 06 index 1 mmio: [0xfeb00000-0xfebfffff] bus: 06 index 2 mmio: [0x0-0x0] bus: 06 index 3 io port: [0x00-0xffff] bus: 06 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0 NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 569k freed HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 2002 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 1279 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 1278 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pcieport-driver 0000:00:1c.2: irq 1277 for MSI/MSI-X pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pcieport-driver 0000:00:1c.3: irq 1276 for MSI/MSI-X pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pcieport-driver 0000:00:1c.4: irq 1275 for MSI/MSI-X pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010580000, using 10240k, total 16384k vesafb: mode is 1280x1024x32, linelength=5120, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 160x64 fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 fb0: VESA VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: SSDT 3FF8E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113) processor ACPI_CPU:00: registered as cooling_device0 ACPI: SSDT 3FF8E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113) processor ACPI_CPU:01: registered as cooling_device1 ACPI: SSDT 3FF8E5D0, 0277 (r1 DpgPmm P003Ist 12 INTL 20060113) processor ACPI_CPU:02: registered as cooling_device2 ACPI: SSDT 3FF8E850, 0277 (r1 DpgPmm P004Ist 12 INTL 20060113) processor ACPI_CPU:03: registered as cooling_device3 Serial: 8250/16550 driver4 ports, IRQ sharing disabled Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19 ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19 ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-6: WDC WD740GD-00FLA2, 31.08F31, max UDMA/133 ata1.00: 145226112 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) ata2.00: ATA-7: Maxtor 6B250S0, BANC1B70, max UDMA/133 ata2.00: 490234752 sectors, multi 0: LBA48 NCQ (not used) ata2.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 31.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors: (74.3 GB/69.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors: (74.3 GB/69.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA Maxtor 6B250S0 BANC PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors: (251 GB/233 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors: (251 GB/233 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg1 type 0 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19 ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ohci1394 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[febfd800-febfdfff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6ffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6ff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. input: AT Translated Set 2 keyboard as /class/input/input2 EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext4 filesystem) readonly. Freeing unused kernel memory: 568k freed usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /class/input/input3 generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-2/input0 usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /class/input/input4 generic-usb 0003:045E:008C.0002: input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:1d.0-1/input0 ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001500002] pata_marvell 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:02:00.0: setting latency timer to 64 scsi4 : pata_marvell scsi5 : pata_marvell ata5: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 16 ata6: PATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 16 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 919 MBytes. [fglrx] vendor: 1002 device: 5e4b count: 1 [fglrx] ioport: bar 4, base 0xa000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Driver built-in PAT support is enabled successfully [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors ata5.01: ATAPI: HL-DT-ST DVDRAM GMA-4020B, A108, max UDMA/33 ata5.01: configured for UDMA/33 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] ACPI: Device needs an ACPI driver sky2 driver version 1.22 sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller Part Number: Yukon 88E8056 Engineering Level: Rev. 1.2 Manufacturer: Marvell sky2 0000:04:00.0: irq 1274 for MSI/MSI-X sky2 eth0: addr 00:22:15:1c:41:89 sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:03:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller Part Number: Yukon 88E8056 Engineering Level: Rev. 1.2 Manufacturer: Marvell sky2 0000:03:00.0: irq 1273 for MSI/MSI-X sky2 eth1: addr 00:22:15:1c:4d:d5 scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GMA-4020B A108 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 26x/30x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:1:0: Attached scsi CD-ROM sr0 sr 4:0:1:0: Attached scsi generic sg2 type 5 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... EXT4 FS on sda4, internal journal on sda4:8 EXT4-fs warning (device sda1): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs. EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda1, internal journal on sda1:8 EXT4-fs: delayed allocation enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. fuse init (API version 7.10) sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready sky2 eth1: enabling interface ADDRCONF(NETDEV_UP): eth1: link is not ready fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Adding 501584k swap on /dev/sda3. Priority:-1 extents:1 across:501584k eth1: no IPv6 routers present atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 ' to make it known. fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 [fglrx:drm_parse_option] *ERROR* "on" is not a valid option [fglrx] Maximum main memory to use for locked dma buffers: 919 MBytes. [fglrx] Gart USWC size:192 M. [fglrx] Gart cacheable size:60 M. [fglrx] Reserved FB block: Shared offset:0, size:40000 [fglrx] Reserved FB block: Unshared offset:7fb6000, size:45000 [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000 [fglrx] Reserved FB block: Unshared offset:ffff000, size:1000 atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. [fglrx] It's not necessary to adjust system aperture on this ASIC fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! warning: `proftpd' uses 32-bit capabilities (legacy support in use) atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 ' to make it known. [fglrx] It's not necessary to adjust system aperture on this ASIC atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known.