Dmesg when modprobe of uvesafb display blank screen

dmesg.modprobe (text/plain), 48.94 KB, created by Liviu Balan on 2009-02-01 21:49:03 UTC

BIOS EBDA/lowmem at: 0009dc00/0009dc00
Linux version 2.6.28-gentoo-r1 (root@mail) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #14 SMP Mon Feb 2 00:24:27 EST 2009
Command line: /root=dev/sda4 rootfstype=ext4 video=uvesafb:1024x768-32@60,nocrtc,noedid quiet splash=silent,fadein,theme:livecd-2007.0 CONSOLE=/dev/tty1
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
 BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
 BIOS-e820: 000000003ff8e000 - 000000003ffd0000 (ACPI NVS)
 BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x3ff80 max_arch_pfn = 0x3ffffffff
init_memory_mapping: 0000000000000000-000000003ff80000
 0000000000 - 003fe00000 page 2M
 003fe00000 - 003ff80000 page 4k
kernel direct mapping tables up to 3ff80000 @ 10000-13000
last_map_addr: 3ff80000 end: 3ff80000
ACPI: RSDP 000FB190, 0014 (r0 ACPIAM)
ACPI: RSDT 3FF80000, 0040 (r1 A_M_I_ OEMRSDT  12000817 MSFT       97)
ACPI: FACP 3FF80200, 0084 (r2 A_M_I_ OEMFACP  12000817 MSFT       97)
ACPI: DSDT 3FF80440, A017 (r1  A1007 A1007001        1 INTL 20060113)
ACPI: FACS 3FF8E000, 0040
ACPI: APIC 3FF80390, 006C (r1 A_M_I_ OEMAPIC  12000817 MSFT       97)
ACPI: MCFG 3FF80400, 003C (r1 A_M_I_ OEMMCFG  12000817 MSFT       97)
ACPI: OEMB 3FF8E040, 0081 (r1 A_M_I_ AMI_OEM  12000817 MSFT       97)
ACPI: HPET 3FF8A460, 0038 (r1 A_M_I_ OEMHPET  12000817 MSFT       97)
ACPI: OSFR 3FF8A4A0, 00B0 (r1 A_M_I_ OEMOSFR  12000817 MSFT       97)
ACPI: SSDT 3FF8EAD0, 0A7C (r1 DpgPmm    CpuPm       12 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000003ff80000
Bootmem setup node 0 0000000000000000-000000003ff80000
  NODE_DATA [0000000000011000 - 0000000000015fff]
  bootmap [0000000000016000 -  000000000001dfef] pages 8
(5 early reservations) ==> bootmem [0000000000 - 003ff80000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000999e48]    TEXT DATA BSS ==> [0000200000 - 0000999e48]
  #3 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
  #4 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
found SMP MP-table at [ffff8800000ff780] 000ff780
 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0003ff80
On node 0 totalpages: 261901
  DMA zone: 56 pages used for memmap
  DMA zone: 2049 pages reserved
  DMA zone: 1876 pages, LIFO batch:0
  DMA32 zone: 3527 pages used for memmap
  DMA32 zone: 254393 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
PERCPU: Allocating 49152 bytes of per cpu data
per cpu data for cpu0 on node0 at 000000000100a000
per cpu data for cpu1 on node0 at 0000000001016000
per cpu data for cpu2 on node0 at 0000000001022000
per cpu data for cpu3 on node0 at 000000000102e000
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256269
Policy zone: DMA32
Kernel command line: /root=dev/sda4 rootfstype=ext4 video=uvesafb:1024x768-32@60,nocrtc,noedid quiet splash=silent,fadein,theme:livecd-2007.0 CONSOLE=/dev/tty1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 2400.034 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Memory: 1024900k/1048064k available (3869k kernel code, 460k absent, 22704k reserved, 2301k data, 568k init)
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.06 BogoMIPS (lpj=9600136)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080926
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.07 BogoMIPS (lpj=9600157)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4800.10 BogoMIPS (lpj=9600209)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4800.09 BogoMIPS (lpj=9600191)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (19200.34 BogoMIPS).
net_namespace: 952 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f]
pci 0000:00:1a.1: reg 20 io port: [0x9880-0x989f]
pci 0000:00:1a.2: reg 20 io port: [0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6ffc00-0xfe6fffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6f8000-0xfe6fbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x9080-0x909f]
pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
pci 0000:00:1d.2: reg 20 io port: [0x9480-0x949f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe6ff800-0xfe6ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x8000-0x8007]
pci 0000:00:1f.2: reg 14 io port: [0x7c00-0x7c03]
pci 0000:00:1f.2: reg 18 io port: [0x7880-0x7887]
pci 0000:00:1f.2: reg 1c io port: [0x7800-0x7803]
pci 0000:00:1f.2: reg 20 io port: [0x7480-0x748f]
pci 0000:00:1f.2: reg 24 io port: [0x7400-0x740f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6ff400-0xfe6ff4ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0x9000-0x9007]
pci 0000:00:1f.5: reg 14 io port: [0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18 io port: [0x8880-0x8887]
pci 0000:00:1f.5: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.5: reg 20 io port: [0x8480-0x848f]
pci 0000:00:1f.5: reg 24 io port: [0x8400-0x840f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfe7e0000-0xfe7effff]
pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfe7c0000-0xfe7dffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
pci 0000:04:00.0: reg 18 io port: [0xd800-0xd8ff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
pci 0000:03:00.0: reg 18 io port: [0xc800-0xc8ff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:02:00.0: reg 10 io port: [0xbc00-0xbc07]
pci 0000:02:00.0: reg 14 io port: [0xb880-0xb883]
pci 0000:02:00.0: reg 18 io port: [0xb800-0xb807]
pci 0000:02:00.0: reg 1c io port: [0xb480-0xb483]
pci 0000:02:00.0: reg 20 io port: [0xb400-0xb40f]
pci 0000:02:00.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfebfe000-0xfebfffff]
pci 0000:06:03.0: reg 10 32bit mmio: [0xfebfd800-0xfebfdfff]
pci 0000:06:03.0: reg 14 io port: [0xec00-0xec7f]
pci 0000:06:03.0: supports D2
pci 0000:06:03.0: PME# supported from D2 D3hot D3cold
pci 0000:06:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 4D, should be 45 [20080926]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:07: ioport range 0x290-0x29f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xa000-0xafff
pci 0000:00:01.0:   MEM window: 0xfe700000-0xfe7fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
pci 0000:00:1c.2:   MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.2:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
pci 0000:00:1c.3:   MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4:   IO window: 0xb000-0xbfff
pci 0000:00:1c.4:   MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.4:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0:   IO window: 0xe000-0xefff
pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 io port: [0xa000-0xafff]
bus: 01 index 1 mmio: [0xfe700000-0xfe7fffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 05 index 0 mmio: [0x0-0x0]
bus: 05 index 1 mmio: [0x0-0x0]
bus: 05 index 2 mmio: [0xfdf00000-0xfdffffff]
bus: 05 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xd000-0xdfff]
bus: 04 index 1 mmio: [0xfea00000-0xfeafffff]
bus: 04 index 2 mmio: [0x0-0x0]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xc000-0xcfff]
bus: 03 index 1 mmio: [0xfe900000-0xfe9fffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xb000-0xbfff]
bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 06 index 0 io port: [0xe000-0xefff]
bus: 06 index 1 mmio: [0xfeb00000-0xfebfffff]
bus: 06 index 2 mmio: [0x0-0x0]
bus: 06 index 3 io port: [0x00-0xffff]
bus: 06 index 4 mmio: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 0
NET: Registered protocol family 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
msgmni has been set to 2001
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 1279 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 1278 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pcieport-driver 0000:00:1c.2: irq 1277 for MSI/MSI-X
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 1276 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pcieport-driver 0000:00:1c.4: irq 1275 for MSI/MSI-X
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 3FF8E0D0, 0277 (r1 DpgPmm  P001Ist       11 INTL 20060113)
processor ACPI_CPU:00: registered as cooling_device0
ACPI: SSDT 3FF8E350, 0277 (r1 DpgPmm  P002Ist       12 INTL 20060113)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: SSDT 3FF8E5D0, 0277 (r1 DpgPmm  P003Ist       12 INTL 20060113)
processor ACPI_CPU:02: registered as cooling_device2
ACPI: SSDT 3FF8E850, 0277 (r1 DpgPmm  P004Ist       12 INTL 20060113)
processor ACPI_CPU:03: registered as cooling_device3
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-6: WDC WD740GD-00FLA2, 31.08F31, max UDMA/133
ata1.00: 145226112 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/133
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-7: Maxtor 6B250S0, BANC1B70, max UDMA/133
ata2.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
ata2.00: configured for UDMA/133
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 31.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors: (74.3 GB/69.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors: (74.3 GB/69.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6B250S0   BANC PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors: (251 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors: (251 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
ohci1394 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[febfd800-febfdfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
input: AT Translated Set 2 keyboard as /class/input/input2
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext4 filesystem) readonly.
Freeing unused kernel memory: 568k freed
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input3
generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-2/input0
usb 6-1: new low speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /class/input/input4
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0001500002]
generic-usb 0003:045E:008C.0002: input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:1d.0-1/input0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
pata_marvell 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:02:00.0: setting latency timer to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 16
ata6: PATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 16
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
 Part Number: Yukon 88E8056
 Engineering Level: Rev. 1.2
 Manufacturer: Marvell
sky2 0000:04:00.0: irq 1274 for MSI/MSI-X
sky2 eth0: addr 00:22:15:1c:41:89
sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:03:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
 Part Number: Yukon 88E8056
 Engineering Level: Rev. 1.2
 Manufacturer: Marvell
sky2 0000:03:00.0: irq 1273 for MSI/MSI-X
sky2 eth1: addr 00:22:15:1c:4d:d5
ata5.01: ATAPI: HL-DT-ST DVDRAM GMA-4020B, A108, max UDMA/33
ata5.01: configured for UDMA/33
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 919 MBytes.
[fglrx]   vendor: 1002 device: 5e4b count: 1
[fglrx] ioport: bar 4, base 0xa000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Driver built-in PAT support is enabled successfully
[fglrx] module loaded - fglrx 8.56.4 [Dec  1 2008] with 1 minors
scsi 4:0:1:0: CD-ROM            HL-DT-ST DVDRAM GMA-4020B A108 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 26x/30x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg2 type 5
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
EXT4 FS on sda4, internal journal on sda4:8
EXT4-fs warning (device sda1): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.

EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4 FS on sda1, internal journal on sda1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.10)
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth1: enabling interface
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
Adding 501584k swap on /dev/sda3.  Priority:-1 extents:1 across:501584k
eth1: no IPv6 routers present
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
warning: `proftpd' uses 32-bit capabilities (legacy support in use)
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x88 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
uvesafb: Unknown parameter `noedit'
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
v86d: EBDA at 9dc00-9ffff
v86d: VBIOS at c0000-cdbff
v86d: task flags: 0x01
v86d: EAX=0x00004f00 EBX=0x00000000 ECX=0x00000000 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: The mode list is in the buffer at 00012122.
uvesafb: , DEFstuvƒ„…†ÓÔÕÖãäåæÿÿ, x7887]
pci 0000:00:1f.2: reg 1c io port: [0x7800-0x7803]
pci 0000:00:1f.2: reg 20 io port: [0x7480-0x748f]
pci 0000:00:1f.2: reg 24 io port: [0x7400-0x740f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6ff400-0xfe6ff4ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0x9000-0x9007]
pci 0000:00:1f.5: reg 14 io port: [0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18 io port: [0x8880-0x8887]
pci 0000:00:1f.5: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.5: reg 20 io port: [0x8480-0x848f]
pci 0000:00:1f.5: reg 24 io port: [0x8400-0x840f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfe7e0000-0xfe7effff]
pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfe7c0000-0xfe7dffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfe70000OEM: ATI ATOMBIOS, VBE v3.0
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000100 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000101 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000103 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000105 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000107 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000109 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x0000010a EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000130 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000110 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000111 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000112 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000113 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000114 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000115 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000116 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000117 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000118 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000119 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x0000011a EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x0000011b EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x0000010d EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x0000010e EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x0000010f EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000120 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000193 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000194 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000195 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000196 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001b3 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001b4 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001b5 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001b6 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001c3 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001c4 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001c5 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001c6 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000183 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000184 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000185 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000186 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000133 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000134 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000135 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000136 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000153 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000154 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000155 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000156 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000163 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000164 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000165 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000166 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000121 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000122 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000123 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000124 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000143 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000144 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000145 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000146 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000173 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000174 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000175 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000176 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000183 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000184 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000185 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x00000186 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001d3 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001d4 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001d5 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001d6 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001e3 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001e4 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001e5 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x0a
v86d: EAX=0x00004f01 EBX=0x00000000 ECX=0x000001e6 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
uvesafb: no monitor limits have been set, default refresh rate will be used
v86d: task flags: 0x00
v86d: EAX=0x00004f04 EBX=0x00000000 ECX=0x0000000f EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
uvesafb: scrolling: redraw
v86d: task flags: 0x0c
v86d: EAX=0x00004f04 EBX=0x00000000 ECX=0x0000000f EDX=0x00000001
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
v86d: task flags: 0x00
v86d: EAX=0x00004f02 EBX=0x00004118 ECX=0x00000000 EDX=0x00000000
v86d: ESP=0x00000000 EBP=0x00000000 ESI=0x00000000 EDI=0x00000000
Console: switching to colour frame buffer device 128x48
fbcondecor: console 0 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 0
uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010680000, using 16384k, total 16384k
fb0: VESA VGA frame buffer device
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.