xorg.conf

xorg.conf (text/plain), 16.08 KB, created by Martin Mokrejš on 2009-01-30 13:43:35 UTC

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the font modules
    Load	"xtrap"
    Load        "glx"
    Load        "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.


# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.


EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

#Section "InputDevice"

    # Identifier	"Keyboard1"

    # for xorg-server-1.4 series and hal-0.5.10
    #Driver	"evdev"
    #Option	"XkbModel" "evdev"
    # for evdev-1.2.0
    # Option    "Device"    "/dev/input/event3"
    # egrep "Name|Handler" /proc/bus/input/devices

    # for <xorg-server-1.4 series and <hal-0.5.10
     # Driver	"kbd"
     # Option "AutoRepeat" "500 30"
     # Option "XkbRules"	"xorg"
     # Option "CoreKeyboard"
     # Option "XkbModel"	"pc105"
     # Option "XkbLayout"	"us,cz_qwerty"
     # Option "XkbOptions" "grp:alt_shift_toggle,grp:switch,grp_led:scroll"
     #Option "CustomKeycodes" "true"


     # $ setxkbmap -print (now it is screwed)
     # xkb_keymap {
     #        xkb_keycodes  { include "xfree86+aliases(qwerty)"       };
     #        xkb_types     { include "complete"      };
     #        xkb_compat    { include "complete+ledscroll(group_lock)"        };
     #        xkb_symbols   { include "pc+latin+cz(qwerty):2+group(switch)+group(alt_shift_toggle)"   };
     #        xkb_geometry  { include "pc(pc105)"     };
     #};
     # $ setxkbmap us
     # $ setxkbmap -print
     # xkb_keymap {
     #         xkb_keycodes  { include "xfree86+aliases(qwerty)"       };
     #         xkb_types     { include "complete"      };
     #         xkb_compat    { include "complete+ledscroll(group_lock)"        };
     #         xkb_symbols   { include "pc+us+group(switch)+group(alt_shift_toggle)"   };
     #         xkb_geometry  { include "pc(pc105)"     };
     # };
     # $ setxkbmap cz  (now it will really work)
     # $ setxkbmap -print
     # xkb_keymap {
     #         xkb_keycodes  { include "xfree86+aliases(qwertz)"       };
     #         xkb_types     { include "complete"      };
     #         xkb_compat    { include "complete+ledscroll(group_lock)"        };
     #         xkb_symbols   { include "pc+cz+group(switch)+group(alt_shift_toggle)"   };
     #         xkb_geometry  { include "pc(pc105)"     };
     # };
     # $


#EndSection



# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

#Section "InputDevice"
#    Identifier	"Mouse0"
#    Driver	"mouse"
#    Option "Protocol"    "ImPS/2"	# NetMouse PS/2
#    Option "Device"      "/dev/input/mice"
#EndSection
#
#Section "InputDevice"
#        Identifier  "SynapticsTouchpad"
#        Driver      "synaptics"
#        Option      "Protocol" "auto-dev"
#        Option      "ZAxisMapping"    "4 5"
#EndSection

# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "BelineaLCD"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync   30-83
#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-75
    # Samsung SyncMaster 203B
    # "1400x1050"   155.80   1400 1600 1920 1952   1050 1216 1228 1330 +hsync +vsync
    # "1280x1024"   135.00   1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
    # "1024x768"     78.75   1024 1040 1136 1312    768  769  772  800 +hsync +vsync
    # "800x600"      49.50    800  816  896 1056    600  601  604  625 +hsync +vsync
    # ModeLine "1400x1050"   155.80   1400 1600 1920 1952   1050 1216 1228 1330 +hsync +vsync
    #
    # Belinea 2080S2
    ModeLine "1600x1200"   175.50   1600 1664 1856 2160   1200 1205 1208 1258 +hsync +vsync
    # ModeLine "1280x1024"   135.00   1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
    # ModeLine "1024x768"     78.75   1024 1040 1136 1312    768  769  772  800 +hsync +vsync
    #
    # Asus L3C/S
    #ModeLine "1400x1050"   108.00   1400 34208 34320 1672   1050 1050 1053 1063
    #ModeLine "1280x1024"   108.00   1280 34208 34320 1672   1024 1050 1053 1063
    #ModeLine "1024x768"    108.00   1024 34208 34320 1672    768 1050 1053 1063

EndSection

Section "Monitor"
    Identifier  "AsusLCD"
    HorizSync   31.5-108
    VertRefresh 50-100
EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	256

#    Clocks	25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "radeon7500M"
    Driver      "radeon"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "ScreenBelineaLCD"
    Device      "radeon7500M"
    Monitor     "BelineaLCD"
    DefaultDepth 16

    Subsection "Display"
        Depth       8
        Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Identifier  "ScreenAsusLCD"
    Device      "radeon7500M"
    Monitor     "AsusLCD"
    DefaultDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "ScreenBelineaLCD"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    #InputDevice "Mouse0" "CorePointer"
    #InputDevice "Keyboard1" "CoreKeyboard"

# prevent hal 5.0.10 messing with my keyboard big #200061
    # Option "AutoAddDevices" "False"
#
# http://bugs.gentoo.org/show_bug.cgi?id=204128#c20
    Option "AllowEmptyInput" "yes"

EndSection

Section "DRI"
    Mode 0666
EndSection