perl-5.8.8-r5 build.log

build.log (text/plain), 33.85 KB, created by Gustavo F. Padovan on 2009-01-28 11:56:16 UTC

>>> Unpacking source...
>>> Unpacking perl-5.8.8.tar.bz2 to /var/tmp/portage/dev-lang/perl-5.8.8-r5/work
 [32;01m*[0m Applying perl-prelink-lpthread.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-perldoc-emptydirs.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-reorder-INC.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-picdl.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-noksh.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-makedepend-syntax.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.7-MakeMaker-RUNPATH.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-regexp-nossp.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-hppa-pa7200-configure.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-USE_MM_LD_RUN_PATH.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-links.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-cplusplus.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-gcc42-command-line.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-asm-page-h-compile-failure.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-perlcc.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-utf8-boundary.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying perl-5.8.8-CVE-2008-1927.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8 ...
First let's make sure your kit is complete.  Checking...
Locating common programs...
Checking compatibility between /bin/echo and builtin echo (if any)...
Symbolic links are supported.
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
3b1   	     dos_djgpp       irix_6_0      nonstopux     sunos_4_0   
aix   	     dynix   	     irix_6_1      openbsd   	 sunos_4_1   
aix_3        dynixptx        isc   	   opus   	 super-ux   
aix_4        epix   	     isc_2   	   os2   	 svr4   
altos486     esix4   	     linux   	   os390   	 svr5   
amigaos      fps   	     lynxos   	   os400   	 ti1500   
apollo       freebsd         machten       posix-bc   	 titanos   
atheos       genix   	     machten_2     powerux   	 ultrix_4   
aux_3        gnu   	     mint   	   qnx   	 umips   
beos         gnukfreebsd     mips   	   rhapsody   	 unicos   
bsdos        gnuknetbsd      mpc   	   sco   	 unicosmk   
convexos     greenhills      mpeix   	   sco_2_3_0     unisysdynix   
cxux         hpux   	     ncr_tower     sco_2_3_1     utekv   
cygwin       i386   	     netbsd   	   sco_2_3_2     uts   
darwin       interix         newsos4       sco_2_3_3     uwin   
dcosx        irix_4   	     next_3   	   sco_2_3_4     vmesa   
dec_osf      irix_5   	     next_3_0      solaris_2     vos   
dgux         irix_6   	     next_4   	   stellar   
Which of these apply, if any? [linux]  

You appear to have ELF support.  I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
Operating system name? [linux]  
Operating system version? [2.6.24.7]  
Build Perl for SOCKS? [n]  
Use the PerlIO abstraction layer? [y]  
Build a threading Perl? [n]  
Build Perl for multiplicity? [n]  
Use which C compiler? [gcc]  
Checking for GNU cc in disguise and/or its version number...
Now, how can we feed standard input to your C preprocessor...
Directories to use for library searches? [/usr/local/lib /lib /usr/lib]  
What is the file extension used for shared libraries? [so]  
Try to use long doubles if available? [n]  
Checking for optional libraries...
What libraries to use?
[-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc]  
What optimizer/debugger flag should be used? [-O2 -mtune=i686 --pipe]  
Any additional cc flags?
[-fno-strict-aliasing -pipe -Wdeclaration-after-statement]  
Let me guess what the preprocessor flags are...
Any additional ld flags (NOT including libraries)? [ -L/usr/local/lib]  
Checking your choice of C compiler and flags for coherency...
Computing filename position in cpp output for #include directives...
<stdlib.h> found.
Checking to see how big your integers are...
Checking to see if you have long long...
Checking to see how big your long longs are...
<inttypes.h> found.
Checking to see if you have int64_t...
Checking which 64-bit integer type we could use...
We could use 'long long' for 64-bit integers.
Try to use 64-bit integers, if available? [n]  
Try to use maximal 64-bit support, if available? [n]  
Checking to see how big your double precision numbers are...
Checking to see if you have long double...
Checking to see how big your long doubles are...
What is your architecture name [i686-linux]  
Perlio selected.
Installation prefix to use? (~name ok) [/usr]  
AFS does not seem to be running...
What installation prefix should I use for installing files? (~name ok)
[/usr]  
Getting the current patchlevel...
Pathname where the private library files will reside? (~name ok)
[/usr/lib/perl5/5.8.8]  
Where do you want to put the public architecture-dependent libraries? (~name ok)
[/usr/lib/perl5/5.8.8/i686-linux]  
Other username to test security of setuid scripts with? [none]  
Well, the recommended value is *not* secure.
Does your kernel have *secure* setuid scripts? [n]  
Do you want to do setuid/setgid emulation? [n]  
<malloc.h> found.
Checking to see how well your C compiler groks the void type...
Good.  It appears to support void to the level perl5 wants.
Checking to see how big your pointers are...
Do you wish to wrap malloc calls to protect against potential overflows? [y]  
Do you wish to attempt to use the malloc that comes with perl5? [n]  
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.
Installation prefix to use for add-on modules and utilities? (~name ok)
[/usr]  
Pathname for the site-specific library files? (~name ok)
[/usr/lib/perl5/site_perl/5.8.8]  
Pathname for the site-specific architecture-dependent library files? (~name ok)
[/usr/lib/perl5/site_perl/5.8.8/i686-linux]  
Do you want to configure vendor-specific add-on directories? [y]  
Installation prefix to use for vendor-supplied add-ons? (~name ok) [/usr]  
Pathname for the vendor-supplied library files? (~name ok)
[/usr/lib/perl5/vendor_perl/5.8.8]  
Pathname for vendor-supplied architecture-dependent files? (~name ok)
[/usr/lib/perl5/vendor_perl/5.8.8/i686-linux]  
Colon-separated list of additional directories for perl to search? [none]  
Checking out function prototypes...
Pathname where the public executables will reside? (~name ok) [/usr/bin]  
Install any extra modules (y or n)? [n]  
Directory for the main Perl5 html pages? (~name ok) [none]  
Directory for the Perl5 module html pages? (~name ok) [none]  
List of earlier versions to include in @INC?
[5.8.0 5.8.0/i686-linux 5.8.2 5.8.2/i686-linux 5.8.4 5.8.4/i686-linux 5.8.5 5.8.5/i686-linux 5.8.6 5.8.6/i686-linux 5.8.7 5.8.7/i686-linux ]  
Checking for GNU C Library...
Shall I use /usr/bin/nm to extract C symbols from the libraries? [y]  
Where is your C library? [/lib/libc-2.6.1.so]  
Extracting names from the following files for later perusal:
	/lib/libc-2.6.1.so
	/lib/libcrypt.so.1
	/lib/libdl.so.2
	/lib/libm.so.6
	/lib/libnsl.so.1
	/lib/libpthread.so.0
	/lib/libutil.so.1
	/usr/lib/libdb.so
	/usr/lib/libgdbm.so.3.0.0
This may take a while....done.
<dld.h> NOT found.
dlopen() found.
Do you wish to use dynamic loading? [y]  
Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]  
Any special flags to pass to gcc -c to compile shared library modules?
[-fPIC]  
What command should be used to create dynamic libraries? [gcc]  
Any special flags to pass to gcc to create a dynamically loaded library?
[-shared -L/usr/local/lib]  
Any special flags to pass to gcc to use dynamic linking? [-rdynamic]  
Build a shared libperl.so (y/n) [n]  
System manual is in /usr/share/man/man1.
Where do the main Perl5 manual pages (source) go? (~name ok)
[/usr/share/man/man1]  
What suffix should be used for the main Perl5 man pages? [1]  
You can have filenames longer than 14 characters.
Where do the perl5 library man pages (source) go? (~name ok)
[/usr/share/man/man3]  
What suffix should be used for the perl5 library man pages? [3pm]  
Figuring out host name...
Your host name appears to be "jolie". Right? [y]  
What is your domain name? [.profusion.mobi]  
What is your e-mail address? [[e-mail]]  
Perl administrator e-mail address [[e-mail]]  
Do you want to install only the version-specific parts of perl? [n]  
What shall I put after the #! to start up perl ("none" to not use #!)?
[/usr/bin/perl]  
Where do you keep publicly executable scripts? (~name ok) [/usr/bin]  
Pathname where the add-on public executables should be installed? (~name ok)
[/usr/bin]  
Pathname where the site-specific html pages should be installed? (~name ok)
[none]  
Pathname where the site-specific library html pages should be installed? (~name ok)
[none]  
Pathname where the site-specific manual pages should be installed? (~name ok)
[/usr/share/man/man1]  
Pathname where the site-specific library manual pages should be installed? (~name ok)
[/usr/share/man/man3]  
Pathname where add-on public executable scripts should be installed? (~name ok)
[/usr/bin]  
Use the "fast stdio" if available? [y]  
off_t found.
Checking to see how big your file offsets are...
fpos_t found.
Checking the size of fpos_t...
Try to understand large files, if available? [y]  
Rechecking to see how big your file offsets are...
Rechecking the size of fpos_t... 16 bytes.
Pathname for the vendor-supplied executables directory? (~name ok)
[/usr/bin]  
Pathname for the vendor-supplied html pages? (~name ok) [none]  
Pathname for the vendor-supplied html pages? (~name ok) [none]  
Pathname for the vendor-supplied manual section 1 pages? (~name ok)
[/usr/share/man/man1]  
Pathname for the vendor-supplied manual section 3 pages? (~name ok)
[/usr/share/man/man3]  
Pathname for the vendor-supplied scripts directory? (~name ok) [/usr/bin]  
qgcvt() found.
Checking how to print long doubles...
gconvert NOT found.
gcvt() found.
I'll use gcvt to convert floats into a string.
fwalk() NOT found.
access() found.
<sys/file.h> defines the *_OK access constants.
accessx() NOT found.
aintl() NOT found.
alarm() found.
<pthread.h> found.
<sys/types.h> found.
<sys/select.h> found.
Testing to see if we should include <time.h>, <sys/time.h> or both.
We'll include <time.h>.
We'll include <sys/time.h>.
Checking to see if your struct tm has tm_zone field...
Checking to see if your struct tm has tm_gmtoff field...
asctime_r() found.
atolf() NOT found.
atoll() found.
Checking whether your compiler can handle __attribute__((format)) ...
Checking whether your compiler can handle __attribute__((malloc)) ...
Checking whether your compiler can handle __attribute__((nonnull(1))) ...
Checking whether your compiler can handle __attribute__((noreturn)) ...
Checking whether your compiler can handle __attribute__((pure)) ...
Checking whether your compiler can handle __attribute__((unused)) ...
Checking whether your compiler can handle __attribute__((warn_unused_result)) ...
bcmp() found.
bcopy() found.
<unistd.h> found.
getpgrp() found.
You have to use getpgrp() instead of getpgrp(pid).
setpgrp() found.
You have to use setpgrp() instead of setpgrp(pid,pgrp).
bzero() found.
You have void (*signal())().
Checking whether your C compiler can cast large floats to int32.
Checking whether your C compiler can cast negative float to unsigned.
vprintf() found.
Your vsprintf() returns (char*).
chown() found.
chroot() found.
chsize() NOT found.
class() NOT found.
clearenv() found.
Hmm... Looks like you have Berkeley networking support.
socketpair() found.
Checking the availability of certain socket constants...
<sys/uio.h> found.
Checking to see if your system supports struct cmsghdr...
Checking to see if your C compiler knows about "const"...
copysignl() found.
crypt() found.
<crypt.h> found.
crypt_r() found.
ctermid_r() NOT found.
ctime_r() found.
cuserid() found.
<limits.h> found.
<float.h> found.
DBL_DIG found.
dbmclose() NOT found.
difftime() found.
<dirent.h> found.
Your directory entries are struct dirent.
Your directory entry does not know about the d_namlen field.
<sys/dir.h> found.
<sys/ndir.h> NOT found.
dirfd() found.
dlerror() found.
<dlfcn.h> found.
What is the extension of dynamically loaded modules [so]  
Checking whether your dlsym() needs a leading underscore ...
dlsym doesn't need a leading underscore.
drand48_r() found.
dup2() found.
eaccess() found.
endgrent() found.
<grp.h> found.
endgrent_r() NOT found.
endhostent() found.
<netdb.h> found.
endhostent_r() NOT found.
endnetent() found.
endnetent_r() NOT found.
endprotoent() found.
endprotoent_r() NOT found.
endpwent() found.
<pwd.h> found.
endpwent_r() NOT found.
endservent() found.
endservent_r() NOT found.
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
Using <string.h> instead of <strings.h>.
<sys/file.h> found.
We'll be including <sys/file.h>.
<fcntl.h> found.
We don't need to include <fcntl.h> if we include <sys/file.h>.
Figuring out the flag used by open() for non-blocking I/O...
Let's see what value errno gets from read() on a O_NONBLOCK file...
Checking how std your stdio is...
fchdir() found.
fchmod() found.
fchown() found.
fcntl() found.
Well, your system has some sort of fd_set available...
and you have the normal fd_set macros.
fgetpos() found.
finite() found.
finitel() found.
flock() found.
fork() found.
fp_class() NOT found.
pathconf() found.
fpathconf() found.
fpclass() NOT found.
fpclassify() NOT found.
fpclassl() NOT found.
Checking to see if you have fpos64_t...
frexpl() found.
<sys/param.h> found.
<sys/mount.h> found.
Checking to see if your system supports struct fs_data...
fseeko() found.
fsetpos() found.
fstatfs() found.
statvfs() found.
fstatvfs() found.
fsync() found.
ftello() found.
Checking for a working futimes()
Yes, it does
getcwd() found.
getespwnam() NOT found.
getfsstat() NOT found.
getgrent() found.
getgrent_r() found.
getgrgid_r() found.
getgrnam_r() found.
gethostbyaddr() found.
gethostbyname() found.
gethostent() found.
gethostname() found.
uname() found.
Shall I ignore gethostname() from now on? [n]  
gethostbyaddr_r() found.
gethostbyname_r() found.
gethostent_r() found.
getitimer() found.
getlogin() found.
getlogin_r() found.
getmnt() NOT found.
getmntent() found.
getnetbyaddr() found.
getnetbyname() found.
getnetent() found.
getnetbyaddr_r() found.
getnetbyname_r() found.
getnetent_r() found.
getpagesize() found.
getprotobyname() found.
getprotobynumber() found.
getprotoent() found.
getpgid() found.
getpgrp2() NOT found.
getppid() found.
getpriority() found.
getprotobyname_r() found.
getprotobynumber_r() found.
getprotoent_r() found.
getprpwnam() NOT found.
getpwent() found.
getpwent_r() found.
getpwnam_r() found.
getpwuid_r() found.
getservbyname() found.
getservbyport() found.
getservent() found.
getservbyname_r() found.
getservbyport_r() found.
getservent_r() found.
getspnam() found.
<shadow.h> found.
getspnam_r() found.
gettimeofday() found.
gmtime_r() found.
hasmntopt() found.
<netinet/in.h> found.
<arpa/inet.h> found.
htonl() found.
ilogbl() found.
strchr() found.
inet_aton() found.
isascii() found.
isfinite() NOT found.
isinf() found.
isnan() found.
isnanl() found.
killpg() found.
lchown() found.
LDBL_DIG found.
<math.h> found.
Checking to see if your libm supports _LIB_VERSION...
Yes, it does (2)
link() found.
localtime_r() found.
localeconv() found.
lockf() found.
lstat() NOT found.
*** WHOA THERE!!! ***
    The recommended value for $d_lstat on this machine was "define"!
    Keep the recommended value? [y]  
madvise() found.
malloc_size() NOT found.
malloc_good_size() NOT found.
mblen() found.
mbstowcs() found.
mbtowc() found.
memchr() found.
memcmp() found.
memcpy() found.
memmove() found.
memset() found.
mkdir() found.
mkdtemp() found.
mkfifo() found.
mkstemp() found.
mkstemps() NOT found.
mktime() found.
<sys/mman.h> found.
mmap() found.
and it returns (void *).
sqrtl() found.
scalbnl() found.
modfl() found.
Your modfl() seems okay for large values.
mprotect() found.
msgctl() found.
msgget() found.
msgsnd() found.
msgrcv() found.
You have the full msg*(2) library.
Checking to see if your system supports struct msghdr...
msync() found.
munmap() found.
nice() found.
<langinfo.h> found.
nl_langinfo() found.
Checking to see how big your characters are (hey, you never know)...
What is the size of a character (in bytes)? [1]  
Checking to see if your C compiler knows about "volatile"...
Choosing the C types to be used for Perl's internal types...
Checking how many bits of your UVs your NVs can preserve...
Checking whether NV 0.0 is all bits zero in memory...
0.0 is represented as all bits zero in memory
Checking to see if you have off64_t...
pause() found.
pipe() found.
poll() found.
readlink() found.
pthread_attr_setscope() found.
random_r() found.
readdir() found.
seekdir() found.
telldir() found.
rewinddir() found.
readdir64_r() found.
readdir_r() found.
readv() found.
recvmsg() found.
rename() found.
rmdir() found.
<memory.h> found.
Checking if your memcmp() can compare relative magnitude...
select() found.
semctl() found.
semget() found.
semop() found.
You have the full sem*(2) library.
You do not have union semun in <sys/sem.h>.
*** WHOA THERE!!! ***
    The recommended value for $d_semctl_semun on this machine was "define"!
    Keep the recommended value? [y]  
You can use union semun for semctl IPC_STAT.
You can also use struct semid_ds* for semctl IPC_STAT.
sendmsg() found.
setegid() found.
seteuid() found.
setgrent() found.
setgrent_r() NOT found.
sethostent() found.
sethostent_r() NOT found.
setitimer() found.
setlinebuf() found.
setlocale() found.
<locale.h> found.
setlocale_r() NOT found.
setnetent() found.
setnetent_r() NOT found.
setprotoent() found.
setpgid() found.
setpgrp2() NOT found.
setpriority() found.
setproctitle() NOT found.
setprotoent_r() NOT found.
setpwent() found.
setpwent_r() NOT found.
setregid() found.
setresgid() found.
setreuid() found.
setresuid() found.
setrgid() NOT found.
setruid() NOT found.
setservent() found.
setservent_r() NOT found.
setsid() found.
setvbuf() found.
<sfio.h> NOT found.
shmctl() found.
shmget() found.
shmat() found.
and it returns (void *).
shmdt() found.
You have the full shm*(2) library.
sigaction() found.
sigprocmask() found.
POSIX sigsetjmp found.
sockatmark() found.
socks5_init() NOT found.
Checking whether sprintf returns the length of the string...
sprintf returns the length of the string (as ANSI says it should)
srand48_r() found.
srandom_r() found.
<sys/stat.h> found.
Checking to see if your struct stat has st_blocks field...
<sys/vfs.h> found.
<sys/statfs.h> found.
Checking to see if your system supports struct statfs...
Checking to see if your struct statfs has f_flags field...
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
strcoll() found.
Checking to see if your C compiler can copy structs...
strerror() found.
strerror_r() found.
strftime() found.
strlcat() NOT found.
strlcpy() NOT found.
strtod() found.
strtol() found.
strtold() found.
strtoll() found.
strtoq() found.
strtoul() found.
strtoull() found.
strtouq() found.
strxfrm() found.
symlink() found.
syscall() found.
sysconf() found.
system() found.
tcgetpgrp() found.
tcsetpgrp() found.
time() found.
time_t found.
<sys/times.h> found.
times() found.
clock_t found.
tmpnam_r() found.
truncate() found.
ttyname_r() found.
tzname[] found.
(Testing for character data alignment may crash the test.  That's okay.)
You can access character data pretty unalignedly.
ualarm() found.
umask() found.
unordered() NOT found.
unsetenv() found.
usleep() found.
ustat() found.
vfork() found.
Do you still want to use vfork()? [n]  
closedir() found.
Checking whether closedir() returns a status...
wait4() found.
waitpid() found.
wcstombs() found.
wctomb() found.
writev() found.
Checking alignment constraints...
Doubles must be aligned on a how-many-byte boundary? [4]  
Checking to see how your cpp does stuff like concatenate tokens...
Oh!  Smells like ANSI's been here.
<db.h> found.
*** WHOA THERE!!! ***
    The recommended value for $i_db on this machine was "undef"!
    Keep the recommended value? [y]  
Looking for a random number function...
Good, found drand48().
Use which function to generate random numbers? [drand48]  
Determining whether or not we are on an EBCDIC system...
Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
Checking how to flush all pending stdio output...
Your fflush(NULL) works okay for output streams.
Let's see if it clobbers input pipes...
fflush(NULL) seems to behave okay with input streams.
Checking the size of gid_t...
Checking the sign of gid_t...
Checking how to print 64-bit integers...
Checking the format strings to be used for Perl's internal types...
Checking the format string to be used for gids...
getgroups() found.
setgroups() found.
What type pointer is the second argument to getgroups() and setgroups()?
[gid_t]  
Checking if your /usr/bin/make program sets $(MAKE)...
mode_t found.
<stdarg.h> found.
<varargs.h> found.
We'll include <stdarg.h> to get va_dcl definition.
It seems that you don't need va_copy().
size_t found.
What pager is used on your system? [/usr/bin/less]  
pid_t found.
Checking how to generate random libraries on your machine...
Your select() operates on 32 bits at a time.
Generating a list of signal names and numbers...
Checking the size of size_t...
Checking to see if you have socklen_t...
<socks.h> NOT found.
I'll be using ssize_t for functions returning a byte count.
Your stdio uses signed chars.
Checking the size of uid_t...
Checking the sign of uid_t...
Checking the format string to be used for uids...
Which compiler compiler (yacc or bison -y) shall I use? [yacc]  
<fp.h> NOT found.
<fp_class.h> NOT found.
<ieeefp.h> NOT found.
<libutil.h> NOT found.
<mntent.h> found.
<ndbm.h> NOT found.
dbm_open() NOT found.
*** WHOA THERE!!! ***
    The recommended value for $i_ndbm on this machine was "define"!
    Keep the recommended value? [y]  
<net/errno.h> NOT found.
<netinet/tcp.h> found.
<poll.h> found.
<prot.h> NOT found.
Guessing which symbols your C compiler and preprocessor define...
tcsetattr() found.
You have POSIX termios.h... good!
<stddef.h> found.
<sunmath.h> NOT found.
<sys/access.h> NOT found.
<sys/filio.h> NOT found.
<sys/ioctl.h> found.
<syslog.h> found.
<sys/mode.h> NOT found.
<sys/resource.h> found.
<sys/security.h> NOT found.
<sys/statvfs.h> found.
<sys/un.h> found.
<sys/utsname.h> found.
<sys/wait.h> found.
<ustat.h> found.
<utime.h> found.
<values.h> found.
<gdbm.h> found.
gdbm_open() found.
Looking for extensions...
What extensions do you wish to load dynamically?
[B ByteLoader Cwd Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Encode Fcntl File/Glob Filter/Util/Call GDBM_File I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 NDBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Time/HiRes Unicode/Normalize XS/APItest XS/Typemap attrs re threads threads/shared]  
What extensions do you wish to load statically? [none]  
Stripping down executable paths...
Creating config.sh...
Doing variable substitutions on .SH files...
Extracting cflags (with variable substitutions)
Extracting config.h (with variable substitutions)
Extracting makeaperl (with variable substitutions)
Extracting makedepend (with variable substitutions)
Extracting makedir (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting writemain (with variable substitutions)
Extracting x2p/cflags (with variable substitutions)
Extracting x2p/Makefile (with variable substitutions)
Run make depend now? [y]  
sh ./makedepend MAKE=make
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8'
sh writemain lib/auto/DynaLoader/DynaLoader.a  > perlmain.c
rm -f opmini.c
cp op.c opmini.c
echo  av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c miniperlmain.c perlmain.c opmini.c | tr ' ' '\n' >.clist
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8'
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for gv.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for xsutils.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for perlmain.o.
Finding dependencies for opmini.o.
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8'
echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH makedir.SH myconfig.SH writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8'
Updating makefile...
test -s perlmain.c && touch perlmain.c
cd x2p; make depend
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8/x2p'
sh ../makedepend MAKE=make
make[2]: Entering directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8/x2p'
echo hash.c  str.c util.c walk.c | tr ' ' '\n' >.clist
make[2]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8/x2p'
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
make[2]: Entering directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8/x2p'
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
make[2]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8/x2p'
Updating makefile...
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.8.8-r5/work/perl-5.8.8/x2p'
Now you must run 'make'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.

make -j2 -j1 
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" miniperlmain.o` -fPIC miniperlmain.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" perl.o` -fPIC perl.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" gv.o` -fPIC gv.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" toke.o` -fPIC toke.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" perly.o` -fPIC perly.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" op.o` -fPIC op.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" pad.o` -fPIC pad.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" regcomp.o` -fPIC regcomp.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -fno-stack-protector -O2 -mtune=i686 --pipe  -Wall
regcomp.c: In function 'S_study_chunk':
regcomp.c:725: warning: comparison is always false due to limited range of data type
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" dump.o` -fPIC dump.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" util.o` -fPIC util.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" mg.o` -fPIC mg.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" reentr.o` -fPIC reentr.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" hv.o` -fPIC hv.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" av.o` -fPIC av.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" run.o` -fPIC run.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" pp_hot.o` -fPIC pp_hot.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" sv.o` -fPIC sv.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
sv.c: In function 'Perl_sv_clear':
sv.c:5222: warning: ignoring return value of 'Perl_io_close', declared with attribute warn_unused_result
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" pp.o` -fPIC pp.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" scope.o` -fPIC scope.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" pp_ctl.o` -fPIC pp_ctl.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" pp_sys.o` -fPIC pp_sys.c
	  CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -mtune=i686 --pipe  -Wall
proto.h:1732: warning: 'S_emulate_eaccess' declared 'static' but never defined
`sh  cflags "optimize='-O2 -mtune=i686 --pipe'" doop.o` -fPIC doop.c
make: /bin/sh: Command not found
make: *** [doop.o] Error 127
 [31;01m*[0m 
 [31;01m*[0m ERROR: dev-lang/perl-5.8.8-r5 failed.
 [31;01m*[0m Call stack:
 [31;01m*[0m               ebuild.sh, line   49:  Called src_compile
 [31;01m*[0m             environment, line 2454:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m       emake -j1 || die "Unable to make"
 [31;01m*[0m  The die message:
 [31;01m*[0m   Unable to make
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the topmost build error, and the call stack if relevant.
 [31;01m*[0m A complete build log is located at '/var/tmp/portage/dev-lang/perl-5.8.8-r5/temp/build.log'.
 [31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.8.8-r5/temp/environment'.
 [31;01m*[0m