BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-hardened (root@megatron) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #1 SMP Mon Jan 26 13:21:36 PST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Cyrix CyrixInstead NSC Geode by NSC Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002dff0000 (usable) BIOS-e820: 000000002dff0000 - 000000002dff3000 (ACPI NVS) BIOS-e820: 000000002dff3000 - 000000002e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Malformed early option 'acpi' DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x2dff0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 2dff0000 @ 10000-16000 ACPI: RSDP 000F7010, 0014 (r0 VKT400) ACPI: RSDT 2DFF3000, 002C (r1 VKT400 AWRDACPI 42302E31 AWRD 0) ACPI: FACP 2DFF3040, 0074 (r1 VKT400 AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 2DFF30C0, 48A8 (r1 VKT400 AWRDACPI 1000 MSFT 100000D) ACPI: FACS 2DFF0000, 0040 ACPI: APIC 2DFF7980, 0054 (r1 VKT400 AWRDACPI 42302E31 AWRD 0) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 735MB LOWMEM available. mapped low ram: 0 - 2dff0000 low ram: 00000000 - 2dff0000 bootmap 00012000 - 00017c00 (8 early reservations) ==> bootmem [0000000000 - 002dff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000200000 - 0000bd59c0] TEXT DATA BSS ==> [0000200000 - 0000bd59c0] #4 [0000bd6000 - 0000bda000] INIT_PG_TABLE ==> [0000bd6000 - 0000bda000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000012000 - 0000018000] BOOTMAP ==> [0000012000 - 0000018000] found SMP MP-table at [c00f54e0] 000f54e0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0002dff0 HighMem 0x0002dff0 -> 0x0002dff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0002dff0 On node 0 totalpages: 188287 free_area_init_node: node 0, pgdat c0b85000, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1440 pages used for memmap Normal zone: 182864 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs Allocating PCI resources starting at 30000000 (gap: 2e000000:d0c00000) PERCPU: Allocating 20480 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186815 Kernel command line: root=/dev/md3 vga=785 video=ywrap,mtrr,vesa:640x480@60 acpi=on max_luns=7 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0b9c000 soft=c0b9a000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1494.228 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 736200k/753600k available (2629k kernel code, 16816k reserved, 240k data, 6124k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xee7f0000 - 0xff7fe000 ( 272 MB) lowmem : 0xc0000000 - 0xedff0000 ( 735 MB) .init : 0xc0205000 - 0xc0800000 (6124 kB) .data : 0xc0b5c000 - 0xc0b9813c ( 240 kB) .text : 0xc0800000 - 0xc0a91687 (2629 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 2988.45 BogoMIPS (lpj=14942280) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed ACPI: Core revision 20080926 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Sempron(tm) 2200+ stepping 01 Brought up 1 CPUs Total of 1 processors activated (2988.45 BogoMIPS). net_namespace: 708 bytes regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered bios32_service: base:000f0000 length:0000df74 entry:0000b740 PCI: PCI BIOS revision 2.10 entry at 0xb740, last bus=1 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] pci 0000:00:01.0: supports D1 pci 0000:00:09.0: reg 10 io port: [0x8000-0x8007] pci 0000:00:09.0: reg 14 io port: [0x8400-0x8403] pci 0000:00:09.0: reg 18 io port: [0x8800-0x8807] pci 0000:00:09.0: reg 1c io port: [0x8c00-0x8c03] pci 0000:00:09.0: reg 20 io port: [0x9000-0x900f] pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 10 32bit mmio: [0xea000000-0xea0000ff] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB pci 0000:00:11.1: reg 20 io port: [0xe000-0xe00f] pci 0000:00:11.5: reg 10 io port: [0xe400-0xe4ff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:00:12.0: reg 14 32bit mmio: [0xea001000-0xea0010ff] pci 0000:00:12.0: supports D1 D2 pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xe4000000-0xe7ffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe8000000-0xe8ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe4000000-0xe7ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 SCSI subsystem initialized PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:02: ioport range 0x4000-0x407f has been reserved system 00:02: ioport range 0x5000-0x500f has been reserved system 00:03: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0x800-0x805 has been reserved system 00:03: ioport range 0x290-0x297 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xe8000000-0xe9ffffff pci 0000:00:01.0: PREFETCH window: 0x000000e4000000-0x000000e7ffffff pci 0000:00:01.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xe8000000-0xe9ffffff] bus: 01 index 2 mmio: [0xe4000000-0xe7ffffff] bus: 01 index 3 mmio: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1233010274.259:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 5752, nTxLock = 46021 msgmni has been set to 1438 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected.Disabling DAC. pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xe4000000, mapped to 0xeeb80000, using 1200k, total 32768k vesafb: mode is 640x480x16, linelength=1280, pages=50 vesafb: protected mode interface info at c000:3fdb 0169 bytes vesafb: pmi: set display start = c00c402c, set palette = c00c408c vesafb: pmi: ports = b4c3 b503 d403 d503 cc03 d703 d803 d903 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 80x30 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:09.0: VIA vt6410 (rev 06) IDE UDMA133 via82cxxx 0000:00:09.0: IDE controller (0x1106:0x3164 rev 0x06) VIA_IDE 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Switched to high resolution mode on CPU 0 via82cxxx 0000:00:09.0: 100% native mode on irq 17 ide0: BM-DMA at 0x9000-0x9007 ide1: BM-DMA at 0x9008-0x900f Probing IDE interface ide0... Probing IDE interface ide1... ide0 at 0x8000-0x8007,0x8402 on irq 17 ide1 at 0x8800-0x8807,0x8c02 on irq 17 via82cxxx 0000:00:11.1: VIA vt6410 (rev 06) IDE UDMA133 via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 VIA_IDE 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xe000-0xe007 ide3: BM-DMA at 0xe008-0xe00f Probing IDE interface ide2... hde: ST3120814A, ATA DISK drive irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.28-hardened #1 Call Trace: [] __report_bad_irq+0x24/0x90 [] note_interrupt+0x169/0x1b0 [] handle_IRQ_event+0x25/0x60 [] handle_fasteoi_irq+0xab/0xe0 [] handle_fasteoi_irq+0x0/0xe0 [] do_IRQ+0x83/0xe0 [] common_interrupt+0x23/0x30 [] default_idle+0x2e/0x40 [] cpu_idle+0x46/0x90 [] start_kernel+0x245/0x2d0 [] unknown_bootoption+0x0/0x1f0 handlers: [] (ide_intr+0x0/0x1f0) [] (ide_intr+0x0/0x1f0) Disabling IRQ #17 hde: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hde: UDMA/100 mode selected Probing IDE interface ide3... hdg: WDC WD1200JB-00EVA0, ATA DISK drive hdg: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdg: UDMA/100 mode selected ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 ide3 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hde: max request size: 512KiB hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63 hde: cache flushes supported hde: hde1 hde2 hde3 hde4 hdg: max request size: 512KiB hdg: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63 hdg: cache flushes supported hdg: hdg1 hdg2 hdg3 hdg4 Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram md: raid1 personality registered for level 1 EDAC MC: Ver: 2.1.0 Jan 26 2009 cpuidle: using governor ladder NET: Registered protocol family 17 Using IPI Shortcut mode rtc_cmos 00:05: setting system clock to 2009-01-26 22:51:19 UTC (1233010279) input: AT Translated Set 2 keyboard as /class/input/input0 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 8 and added 8 devices. md: autorun ... md: considering hdg4 ... md: adding hdg4 ... md: hdg3 has different UUID to hdg4 md: hdg2 has different UUID to hdg4 md: hdg1 has different UUID to hdg4 md: adding hde4 ... md: hde3 has different UUID to hdg4 md: hde2 has different UUID to hdg4 md: hde1 has different UUID to hdg4 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md: considering hdg3 ... md: adding hdg3 ... md: hdg2 has different UUID to hdg3 md: hdg1 has different UUID to hdg3 md: adding hde3 ... md: hde2 has different UUID to hdg3 md: hde1 has different UUID to hdg3 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering hdg2 ... md: adding hdg2 ... md: hdg1 has different UUID to hdg2 md: adding hde2 ... md: hde1 has different UUID to hdg2 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hdg1 ... md: adding hdg1 ... md: adding hde1 ... md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: ... autorun DONE. md3: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 6124k freed processor ACPI_CPU:00: registered as cooling_device0 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input3 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ACPI: Sleep Button (CM) [SLPB] fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [FAN] (on) agpgart: Detected VIA KM400/KM400A chipset agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-hardened uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-hardened uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28-hardened uhci_hcd usb usb3: SerialNumber: 0000:00:10.2 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine: Broken BIOS detected, avoid_D3 enabled. ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0xea001000, 00:11:5b:a8:b1:38, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 21, io mem 0xea000000 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.28-hardened ehci_hcd usb usb4: SerialNumber: 0000:00:10.3 ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: GenPS/2 Genius Mouse as /class/input/input4 md1:<6> md2:<6> md4: unknown partition table unknown partition table unknown partition table EXT3 FS on md3, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 441656k swap on /dev/md2. Priority:-1 extents:1 across:441656k eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) eth0: no IPv6 routers present it87: Found IT8705F chip at 0x290, revision 3 it87 it87.656: Detected broken BIOS defaults, disabling PWM interface RPC: Registered udp transport module. RPC: Registered tcp transport module. Uniform CD-ROM driver unloaded CPU0 0: 29 IO-APIC-edge timer 1: 75 IO-APIC-edge i8042 6: 3 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 2 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 12: 1497790 IO-APIC-edge i8042 14: 9597 IO-APIC-edge ide2 15: 9443 IO-APIC-edge ide3 17: 100010 IO-APIC-fasteoi ide0, ide1 21: 0 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4 22: 0 IO-APIC-fasteoi VIA8233 23: 13032 IO-APIC-fasteoi eth0 NMI: 0 Non-maskable interrupts LOC: 341591 Local timer interrupts RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts SPU: 0 Spurious interrupts ERR: 0 MIS: 0