no-SMP with libata

pata_via_error.txt (text/plain), 24.12 KB, created by Steve Arnold on 2009-01-27 07:19:41 UTC

BIOS EBDA/lowmem at: 0009fc00/0009fc00
Linux version 2.6.28-hardened (root@megatron) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #3 Mon Jan 26 20:38:17 PST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Cyrix CyrixInstead
  NSC Geode by NSC
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002dff0000 (usable)
 BIOS-e820: 000000002dff0000 - 000000002dff3000 (ACPI NVS)
 BIOS-e820: 000000002dff3000 - 000000002e000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x2dff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 2dff0000 @ 10000-16000
ACPI: RSDP 000F7010, 0014 (r0 VKT400)
ACPI: RSDT 2DFF3000, 002C (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 2DFF3040, 0074 (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 2DFF30C0, 48A8 (r1 VKT400 AWRDACPI     1000 MSFT  100000D)
ACPI: FACS 2DFF0000, 0040
ACPI: APIC 2DFF7980, 0054 (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
735MB LOWMEM available.
  mapped low ram: 0 - 2dff0000
  low ram: 00000000 - 2dff0000
  bootmap 00012000 - 00017c00
(6 early reservations) ==> bootmem [0000000000 - 002dff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000200000 - 0000bb8c90]    TEXT DATA BSS ==> [0000200000 - 0000bb8c90]
  #2 [0000bb9000 - 0000bbd000]    INIT_PG_TABLE ==> [0000bb9000 - 0000bbd000]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #5 [0000012000 - 0000018000]          BOOTMAP ==> [0000012000 - 0000018000]
found SMP MP-table at [c00f54e0] 000f54e0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0002dff0
  HighMem  0x0002dff0 -> 0x0002dff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0002dff0
On node 0 totalpages: 188287
free_area_init_node: node 0, pgdat c0b77e20, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1440 pages used for memmap
  Normal zone: 182864 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 2e000000:d0c00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 186815
Kernel command line: root=/dev/md3 vga=785 video=ywrap,mtrr,vesa:640x480@60 acpi=on max_luns=7
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0b82000 soft=c0b81000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1494.220 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 736316k/753600k available (2549k kernel code, 16672k reserved, 197k data, 6140k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffab000 - 0xfffff000   ( 336 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xee7f0000 - 0xff7fe000   ( 272 MB)
    lowmem  : 0xc0000000 - 0xedff0000   ( 735 MB)
      .init : 0xc0201000 - 0xc0800000   (6140 kB)
      .data : 0xc0b4e000 - 0xc0b7f75c   ( 197 kB)
      .text : 0xc0800000 - 0xc0a7d463   (2549 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2988.44 BogoMIPS (lpj=14942200)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Sempron(tm)   2200+ stepping 01
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
net_namespace: 700 bytes
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
bios32_service: base:000f0000 length:0000df74 entry:0000b740
PCI: PCI BIOS revision 2.10 entry at 0xb740, last bus=1
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:08.0: reg 10 io port: [0xc000-0xc007]
pci 0000:00:08.0: reg 14 io port: [0xc400-0xc403]
pci 0000:00:08.0: reg 18 io port: [0xc800-0xc807]
pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:08.0: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 10 32bit mmio: [0xea000000-0xea0000ff]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
pci 0000:00:11.1: reg 20 io port: [0xe000-0xe00f]
pci 0000:00:11.5: reg 10 io port: [0xe400-0xe4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xea001000-0xea0010ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xe4000000-0xe7ffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe8000000-0xe8ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe4000000-0xe7ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:02: ioport range 0x4000-0x407f has been reserved
system 00:02: ioport range 0x5000-0x500f has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x800-0x805 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: 0xe8000000-0xe9ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000e4000000-0x000000e7ffffff
pci 0000:00:01.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 mmio: [0x0-0x0]
bus: 01 index 1 mmio: [0xe8000000-0xe9ffffff]
bus: 01 index 2 mmio: [0xe4000000-0xe7ffffff]
bus: 01 index 3 mmio: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1233032034.259:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 5753, nTxLock = 46029
msgmni has been set to 1438
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected.Disabling DAC.
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xe4000000, mapped to 0xeeb80000, using 1200k, total 32768k
vesafb: mode is 640x480x16, linelength=1280, pages=50
vesafb: protected mode interface info at c000:3fdb 0169 bytes
vesafb: pmi: set display start = c00c402c, set palette = c00c408c
vesafb: pmi: ports = b4c3 b503 d403 d503 cc03 d703 d803 d903 ff03 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
pata_via 0000:00:08.0: version 0.3.3
pata_via 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Switched to high resolution mode on CPU 0
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xd000 irq 16
ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd008 irq 16
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
ata3.00: ATA-7: ST3120814A, 3.AAJ, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48 
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.28-hardened #3
Call Trace:
 [<c084e774>] __report_bad_irq+0x24/0x90
 [<c084e949>] note_interrupt+0x169/0x1b0
 [<c084d8d5>] handle_IRQ_event+0x25/0x60
 [<c084f0a0>] handle_fasteoi_irq+0x0/0xa0
 [<c084f10b>] handle_fasteoi_irq+0x6b/0xa0
 [<c0805cc8>] do_IRQ+0x78/0xd0
 <IRQ>  [<c08043a3>] common_interrupt+0x23/0x30
 [<c08094c9>] default_idle+0x29/0x40
 [<c0801cc1>] cpu_idle+0x21/0x60
 [<c0224a8f>] start_kernel+0x1ff/0x290
 [<c02244c0>] unknown_bootoption+0x0/0x1f0
handlers:
[<c09c5780>] (ata_sff_interrupt+0x0/0x1a0)
Disabling IRQ #16
ata3.00: configured for UDMA/100
ata4.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100
ata4.00: 234441648 sectors, multi 16: LBA48 
ata4.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST3120814A       3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Direct-Access     ATA      WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
md: raid1 personality registered for level 1
EDAC MC: Ver: 2.1.0 Jan 26 2009
cpuidle: using governor ladder
NET: Registered protocol family 17
Using IPI Shortcut mode
rtc_cmos 00:05: setting system clock to 2009-01-27 04:53:57 UTC (1233032037)
input: AT Translated Set 2 keyboard as /class/input/input0
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 8 and added 8 devices.
md: autorun ...
md: considering sdb4 ...
md:  adding sdb4 ...
md: sdb3 has different UUID to sdb4
md: sdb2 has different UUID to sdb4
md: sdb1 has different UUID to sdb4
md:  adding sda4 ...
md: sda3 has different UUID to sdb4
md: sda2 has different UUID to sdb4
md: sda1 has different UUID to sdb4
md: created md4
md: bind<sda4>
md: bind<sdb4>
md: running: <sdb4><sda4>
raid1: raid set md4 active with 2 out of 2 mirrors
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb2 has different UUID to sdb3
md: sdb1 has different UUID to sdb3
md:  adding sda3 ...
md: sda2 has different UUID to sdb3
md: sda1 has different UUID to sdb3
md: created md3
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdb2 ...
md:  adding sdb2 ...
md: sdb1 has different UUID to sdb2
md:  adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md2
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md1
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md1 active with 2 out of 2 mirrors
md: ... autorun DONE.
 md3: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 6140k freed
agpgart: Detected VIA KM400/KM400A chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
processor ACPI_CPU:00: registered as cooling_device0
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
fan PNP0C0B:00: registered as cooling_device1
ACPI: Fan [FAN] (on)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28-hardened uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28-hardened uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28-hardened uhci_hcd
usb usb3: SerialNumber: 0000:00:10.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 21, io mem 0xea000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28-hardened ehci_hcd
usb usb4: SerialNumber: 0000:00:10.3
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0xea001000, 00:11:5b:a8:b1:38, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: GenPS/2 Genius Mouse as /class/input/input4
 md2:<6> md4:<6> md1: unknown partition table
 unknown partition table
 unknown partition table
EXT3 FS on md3, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 441656k swap on /dev/md2.  Priority:-1 extents:1 across:441656k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
eth0: no IPv6 routers present
it87: Found IT8705F chip at 0x290, revision 3
it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
nfs: server kuroshin not responding, still trying
nfs: server kuroshin OK
           CPU0       
  0:         29   IO-APIC-edge      timer
  1:          9   IO-APIC-edge      i8042
  6:          3   IO-APIC-edge      floppy
  7:          0   IO-APIC-edge      parport0
  8:          2   IO-APIC-edge      rtc0
  9:          0   IO-APIC-fasteoi   acpi
 12:    3843059   IO-APIC-edge      i8042
 14:      31973   IO-APIC-edge      pata_via
 15:      32204   IO-APIC-edge      pata_via
 16:     100002   IO-APIC-fasteoi   pata_via
 21:          0   IO-APIC-fasteoi   uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4
 22:          0   IO-APIC-fasteoi   VIA8233
 23:     217125   IO-APIC-fasteoi   eth0
NMI:          0   Non-maskable interrupts
LOC:     872539   Local timer interrupts
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          0
MIS:          0
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:11.1
  0170-0177 : pata_via
01f0-01f7 : 0000:00:11.1
  01f0-01f7 : pata_via
0290-0297 : pnp 00:03
  0295-0296 : it87
    0295-0296 : it87
0376-0376 : 0000:00:11.1
  0376-0376 : pata_via
0378-037a : parport0
03c0-03df : vesafb
03f2-03f5 : floppy
03f6-03f6 : 0000:00:11.1
  03f6-03f6 : pata_via
03f7-03f7 : floppy DIR
03f8-03ff : serial
04d0-04d1 : pnp 00:03
0800-0805 : pnp 00:03
0cf8-0cff : PCI conf1
4000-407f : 0000:00:11.0
  4000-407f : pnp 00:02
    4000-4003 : ACPI PM1a_EVT_BLK
    4004-4005 : ACPI PM1a_CNT_BLK
    4008-400b : ACPI PM_TMR
    4010-4015 : ACPI CPU throttle
    4020-4023 : ACPI GPE0_BLK
5000-500f : 0000:00:11.0
  5000-500f : pnp 00:02
    5000-5007 : vt596_smbus
c000-c007 : 0000:00:08.0
  c000-c007 : pata_via
c400-c403 : 0000:00:08.0
  c400-c403 : pata_via
c800-c807 : 0000:00:08.0
  c800-c807 : pata_via
cc00-cc03 : 0000:00:08.0
  cc00-cc03 : pata_via
d000-d00f : 0000:00:08.0
  d000-d00f : pata_via
d400-d41f : 0000:00:10.0
  d400-d41f : uhci_hcd
d800-d81f : 0000:00:10.1
  d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:10.2
  dc00-dc1f : uhci_hcd
e000-e00f : 0000:00:11.1
  e000-e00f : pata_via
e400-e4ff : 0000:00:11.5
  e400-e4ff : VIA8233
e800-e8ff : 0000:00:12.0
  e800-e8ff : via-rhine