aboot> b 2/boot/vmlinuz-2.6.28 root=/dev/hda2 console=ttyS0 aboot: loading uncompressed boot/vmlinuz-2.6.28... aboot: loading compressed boot/vmlinuz-2.6.28... aboot: PHDR 0 vaddr 0xfffffc0000310000 offset 0x100 size 0x45fe4c aboot: bss at 0xfffffc000076fe4c, size 0x57654 aboot: zero-filling 357972 bytes at 0xfffffc000076fe4c aboot: starting kernel boot/vmlinuz-2.6.28 with arguments root=/dev/hda2 console=ttyS0 Linux version 2.6.28 (root@sheldon) (gcc version 4.3.2 (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) ) #1 Sun Jan 11 12:34:54 CET 2009 Booting on Nautilus using machine vector Nautilus from SRM Major Options: EV67 LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ Command line: root=/dev/hda2 console=ttyS0 memcluster 0, usage 1, start 0, end 256 memcluster 1, usage 0, start 256, end 130994 memcluster 2, usage 1, start 130994, end 131072 memcluster 3, usage 0, start 131072, end 262142 memcluster 4, usage 1, start 262142, end 262144 freeing pages 256:384 freeing pages 998:130994 freeing pages 131072:262142 reserving pages 998:1002 8192K Bcache detected; load hit latency 18 cycles, load miss latency 158 cycles Iron stat_cmd 22100006 Iron ECC f00 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260350 Kernel command line: root=/dev/hda2 console=ttyS0 PID hash table entries: 4096 (order: 12, 32768 bytes) HWRPB cycle frequency bogus. Estimated 796418574 Hz Using epoch = 2000 Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes) Memory: 2071216k/2097136k available (3122k kernel code, 22632k reserved, 251k data, 144k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 1586.36 BogoMIPS (lpj=774144) Mount-cache hash table entries: 512 net_namespace: 536 bytes NET: Registered protocol family 16 pci 0000:00:03.0: PME# supported from D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:06.0: PME# supported from D2 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: quirk: region 4000-403f claimed by ali7101 ACPI pci 0000:00:11.0: quirk: region 5000-501f claimed by ali7101 SMB pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf2000000-0xf2ffffff pci 0000:00:01.0: PREFETCH window: 0x000000f4000000-0x000000ffffffff SCSI subsystem initialized NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 4194304 bytes) TCP bind hash table entries: 65536 (order: 6, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 srm_env: version 0.0.6 loaded successfully msgmni has been set to 4046 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:00:07.0: Activating ISA DMA hang workarounds nvidiafb: Device ID: 10de0110 nvidiafb: EDID found from BUS1 i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. nvidiafb: Unable to detect which CRTCNumber... ...Defaulting to CRTCNumber 0 nvidiafb: Using CRT on CRTC 0 Console: switching to colour frame buffer device 200x75 nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0xF8000000) Linux agpgart interface v0.103 agpgart-amdk7 0000:00:00.0: AMD 761 chipset ------------[ cut here ]------------ WARNING: at mm/vmalloc.c:104 vmap_page_range+0x1b8/0x320() Modules linked in: fffffc007f03b968 0000000000000003 fffffc0000377e08 fffffffc00002000 fffffffc00008000 0000000000000003 6761705f70616d76 2b65676e61725f65 78302f3862317830 0000000000303233 fffffc000074fc60 0000000000000000 fffffc000074f110 fffffc000074f110 fffffc000074fc68 0000000000000000 0000000000000000 fffffc000074f150 0000000000000001 00000000000200d2 0000000000000000 0000000000000000 0000000000000001 0000000000000044 Trace: [] vmap_page_range+0x1b8/0x320 [] __vmalloc_area_node+0xb8/0x1b0 [] map_vm_area+0x34/0x60 [] __vmalloc_area_node+0x150/0x1b0 [] __vmalloc_area_node+0xfc/0x1b0 [] agp_add_bridge+0x1a4/0x610 [] agp_amdk7_probe+0x17c/0x2ec [] pci_device_probe+0x8c/0xc0 [] driver_probe_device+0xa8/0x230 [] __driver_attach+0xdc/0xe0 [] bus_for_each_dev+0x78/0xd0 [] __driver_attach+0x0/0xe0 [] driver_attach+0x2c/0x40 [] bus_add_driver+0x28c/0x340 [] driver_register+0x94/0x1d0 [] __pci_register_driver+0x64/0xf0 [] do_one_initcall+0x34/0x1e0 [] proc_register+0x6c/0x280 [] proc_register+0x50/0x280 [] create_proc_entry+0x7c/0x100 [] register_irq_proc+0xbc/0xe0 [] init_irq_proc+0x74/0xa0 [] kernel_thread+0x28/0x90 ---[ end trace 2eba2bbcc68c9643 ]--- agpgart-amdk7 0000:00:00.0: can't allocate memory for key lists agpgart-amdk7 0000:00:00.0: agp_backend_initialize() failed agpgart-amdk7: probe of 0000:00:00.0 failed with error -12 [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf3043000, 00:00:f0:51:19:57, IRQ 11. Uniform Multi-Platform E-IDE driver alim15x3 0000:00:10.0: IDE controller (0x10b9:0x5229 rev 0xc4) alim15x3 0000:00:10.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8880-0x8887 ide1: BM-DMA at 0x8888-0x888f hda: Maxtor 4R120L0, ATA DISK drive hda: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-cd driver 5.00 Driver 'sd' needs updating - please use bus_type methods serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller atkbd.c: keyboard reset failed on isa0060/serio0 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) input: ImPS/2 Logitech Wheel Mouse as /class/input/input0 VFS: Cannot open root device "hda2" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)